summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-15mb/google/asurada: Implement HW reset functionYidi Lin
TEST=call do_board_reset() manually. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I355f71e731f1045cd80a133cd31cf4d55f14d91f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-15soc/amd/cezanne,picasso/uart: remove unneeded struct nameFelix Held
This struct isn't used anywhere else, so there's no need to name it. Change-Id: I22eda07f14096d2b7400e6ab715641ffd68fbc08 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49444 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14mainboard/volteer: Configure UsbTcPortEn valueBrandon Breitenstein
The default value is not sufficient to correctly configure the Type-C ports as it has all ports disabled by default. On Volteer ports 0 and 1 are enabled so setting this value to 0x3 and correctly keeping the IomPortPadCfg values at 0 for ports that have a retimer and ports that are not configured. These values were set to 0x90000000 to avoid s0ix issues which arose from the UsbTcPortEn value being incorrect. BUG=b:159151238 BRANCH=firmware-volteer-13672.B TEST=Built image for Voxel and verified that s0ix cycles complete without any issues Change-Id: Ib4f2bd0f68debd4e97ccaab9e1d8a873dc4e4d9f Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48814 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/intel/tgl: Add configurable value for UsbTcPortEnBrandon Breitenstein
As a requirement of TCSS this setting needs to be correctly set to determine what Type-C ports are enabled on the platform. Without this value correctly set there can be adverse effects on the other TCSS specific values. BUG=b:159151238 BRANCH=firmware-volteer-13672.B TEST=Built image for Voxel and verified that S0ix cycles no longer fail when the IomPortPad is set to 0 Change-Id: I6c5260cda71041439fe89d15bd3cafd4052ef1e7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2021-01-14soc/amd/picasso: Remove printf in aslRaul E Rangel
These are no longer really useful. We can also enable Power Resource ACPI debug in the kernel if we want these messages. BUG=none BRANCH=zork TEST=emerge-zork and verify debug messages are no longer posted Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I936e816266825f1c59377c2e079ffe1a5188838c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-14build system: Structure and serialize INTERMEDIATEPatrick Georgi
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying the file in some way. When running them in parallel, coreboot.pre can be read from and written to in parallel which can corrupt the result. Add a function to create those rules that also adds existing INTERMEDIATE targets to enforce an order (as established by evaluation order of Makefile.inc files). While at it, also add the addition to the PHONY target so we don't forget it. BUG=chromium:1154313, b:174585424 TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2 timeout and sercon) and saw that they were executed. Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/picasso/uart: add missing device/device.h includeFelix Held
Change-Id: Ie3188d36e8ecacab42818c8619122751fcb7cdf8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49379 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/cezanne: add remaining non-ACPI parts of UART supportFelix Held
The ACPI part still needs some more code to be in place, so add that later. TEST=Together with the currently not merged rest of the amdfw patch train applied this results in working serial console in bootblock in Majolica. Change-Id: Ia844e86a80c19026ac5b47a5a1e91c2553ea5cca Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49378 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/cezanne: add AOAC supportFelix Held
Change-Id: I9d7574b60640eaf9a47a797e823324edeaf1e770 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-14mb/amd/majolica: use integrated UART as consoleFelix Held
Change-Id: Ic6dcbe999234f233fbac8fbdb06d22c8577b1a40 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-14soc/amd/cezanne: add console UART supportFelix Held
Change-Id: I1a01cc745c7049dc672bca12df5c6b764ac9b907 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-14soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_UARTFelix Held
Since the functions that get called by the coreboot console initialization code aren't in the SOC-specific code anymore, the SOC's uart.c can be included unconditionally in the build now. This also replaces the STONEYRIDGE_UART Kconfig option with the common AMD_SOC_CONSOLE_UART one. Change-Id: I09c15566a402895d6388715e8e5a802dc3c94fdd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/common/block/uart/Makefile: use all targetFelix Held
Change-Id: I5079decfae982d2222bb9a7f5155d51885d4d3a9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49374 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/piasso/uart: move get_uart_base prototype to common code headerFelix Held
This will result in less code duplication when the common AMD SoC UART support gets used for more AMD SoCs. Change-Id: Id1786f32324de3e3947d792c599e2019705c5a85 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49373 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/common/uart: move CONSOLE_UART_BASE_ADDRESS back to SoC codeFelix Held
This partially reverts commit 6f8f9c969be9d471464f1b6a42b4bb1c2590db5c by moving CONSOLE_UART_BASE_ADDRESS back to the SoC-specific code, since the number and base addresses of UARTs turned out to be rather SoC- specific. The help text for the AMD_SOC_CONSOLE_UART option also contained those base addresses, so remove that as well. Change-Id: I01211ec62421c56f22ed611313d6245a05bdea67 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/picasso: remove broken and unused legacy UART supportFelix Held
The UARTs in the Picasso SoC are memory mapped, but there is also some hardware support that isn't used by any board to make the UARTs behave like the ones found on legacy x86 machines from the 90s. In the MMIO mode the MMIO address of the UART controller is passed to the OS via ACPI. The OS expects the base clock of the UART controller to be 48MHz (see the cz_uart_desc struct in drivers/acpi/acpi_apd.c and drivers/tty/serial/8250/8250_dw.c in the Linux kernel) in this case. It is also possible to enable additional decodes from four 8 byte legacy I/O locations used for serial ports to the different UART controllers, which doesn't disable the MMIO access though. The legacy I/O-mapped serial ports are usually expected to have a base clock of 16*115200Hz which the hardware can also provide to the UART's baud rate generator. So there are two possible valid configurations to use the UARTs; either MMIO access in combination with a 48MHz base clock or the legacy I/O decode with a ~1.8MHz base clock. The existing code unconditionally generates ACPI objects for all enabled UARTs, so those shouldn't be put into legacy mode and switching the base clock to ~1.8MHz was only done in the case that the UART was used as coreboot console UART which still used the MMIO access, but the lower base clock. Since no board even selects this option and it's rather invasive to properly implement this feature, just drop the corresponding broken code. TEST=SoC UART console still works on Mandolin. Change-Id: I26fa8fdfc781b583ba56ac4dbcbbfb6100e84852 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49371 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14mb/google/dedede/var/boten: Support ELAN i2c-hid touchscreen for botenflexStanley Wu
Update ELAN i2c-hid touchscreen configuration BUG=b:172517685 BRANCH=dedede TEST=Verify touchscreen is working fine on botenflex Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ia7c81fd0a772968ec32406f1e366a90481fc5ad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-14amd_blobs: Add new picasso VBIOSMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Icf1571ae360cee5698626f0360e1408360e8a7f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-13soc/amd/picasso: Disable CBFS MCACHERaul E Rangel
This is causing boot errors on zork: coreboot-v1.9308_26_0.0.22-18590-g4598a7bed945 Wed Dec 16 17:32:25 UTC 2020 bootblock starting (log level: 8)... Family_Model: 00820f01 PSP boot mode: Development Silicon level: Pre-Production PMxC0 STATUS: 0x800 BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) FMAP: area FW_MAIN_B found @ 312000 (3137280 bytes) ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106 BUG=b:177323348 TEST=Boot ezkinil to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f2bbdd9c87c4efdfb0042e90a20b489fa0efced Reviewed-on: https://review.coreboot.org/c/coreboot/+/49128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-13sb/intel: Add CBMC entries in GNVSKyösti Mälkki
While unused, this allows use of a common initialisation code for GNVS allocation. Change-Id: Ie84b5a3e16d3baa12bcd5dadac0b1f7edb323272 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13cpu/x86/smm: Pass GNVS with smm_module_loader v2Kyösti Mälkki
Change-Id: I9971069803a7cd1b9be0ac0cfa410b6e1fdc3eeb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13ACPI: Have single call-site for acpi_inject_nvsa()Kyösti Mälkki
Change-Id: I61a9b07ec3fdaeef0622df82e106405f01e89a9e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48719 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13mb/google/kahlee,zork: Use mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ic9cdcc497bf1a9f5bfed5e6d95040bfa602b0b89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13ACPI: Add common acpi_fill_gnvs()Kyösti Mälkki
Change-Id: I515e830808a95eee3ce72b16fd26da6ec79dac85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48718 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13soc/amd: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed functionality. Change-Id: I61010f64a4a935f238e6dcd0f8c1340a6cc68eb4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13soc/amd: Rename to pm_fill_gnvs()Kyösti Mälkki
Change-Id: I80f92bed737904e6ffc858b45459405fe76f1d04 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-13mb/google/volteer/variants/delbin: Update PL1 min and max for DelbinDeepika Punyamurtula
Update PL1 min and max values for Delbin systems BUG=b:168958222 BRANCH=None TEST=Build and verify on delbin system Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: I2152f0dbeb0ae463b78464571b6c434830f0082a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-13nvramcui: Make local render_form() function staticNico Huber
Allows us to build with `-Wmissing-prototypes`. Change-Id: I722b41e515ee472697028a912b9136ce59611051 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47635 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13sb/intel/bd82x6x: Correct xHCI sleep workaroundAngel Pons
The S3/S4 workaround is specific to Panther Point stepping A0, and it is wrongly implemented. Rewrite the whole function as per reference code. Since this runs in SMM, be overly cautious and double-check everything. Do not rely on GNVS to determine if xHCI is enabled. Instead, check whether the corresponding bit in the Function Disable register is set. Only Panther Point has xHCI, so exit early if this is not the case. Change-Id: Iabce6c52fac781dc694f5b589fab2e9fe438f3f5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-13mb/google/volteer: Add CSE Lite SKU support to Copanohao_chou
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:174338903 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I875f6b32c4053ef6d23ad7606cd35a129a78c306 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49290 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13util/cbfstool: unbreak compilation on FreeBSDIdwer Vollering
Compilation has been broken in commit I022468f6957415ae68a7a7e70428ae6f82d23b06 Adding a missing define solved this. See https://cgit.freebsd.org/src/tree/sys/sys/fcntl.h#n319 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I3433e4c9269880d3202dd494e5b2e962757a6b87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-13util/superiotool: add IT5570E registersMichael Niewöhner
Add registers from IT5570E datsheet v0.3.1. Tested on Clevo L141CU. Change-Id: Idc764c6180e235298835d7639fcb0b562a2c21a4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48922 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13soc/intel/tigerlake: Disable TC cold supportSrinidhi N Kaushik
This change lets IOM consider all USB connected devices as device attached(DA) scenario. While connecting a typec-to-a dongle, IOM would disable TC cold and help to resolve enemuration failure after usb3 device is plugged into the dongle. BUG=b:173054070 TEST=Build and boot on delbin. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I0ad0322693b4f8fbf1000b24eb21dddcebec686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/49244 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12soc/intel: rename uart_max_indexMichael Niewöhner
The name `..._index` is confusing since the maximum index of an array is not `ARRAY_SIZE(array)` but `ARRAY_SIZE(array) - 1`. Rename `uart_max_index` to `uart_ctrlr_config_size` to make the name match the variable´s value. Change-Id: I7409c9dc040c3c6ad718abc96f268c187d50d79c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-12mb/google/brya: Initialize overridetree.cbEric Lai
Initiate overridetree.cb based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I31e5ac1703476083ac71dac30b0a3299b38384c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/brya: Add gpio tableEric Lai
Follow latest schematic to fill gpio table. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a983605b5139ff8510a0cf225e6564b9215cb1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/volteer: Configure Voxel USB2 ports for Type CJohn Zhao
Two USB2 ports 4 and 9 are assigned to type C connectors on Voxel board. This update configures these USB2 ports for Type C which will allow USB2 port reset message upstream from PCH to CPU to recover a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Booted to kernel on Voxel board and verified usb2 port reset message enable bits through pch xhci_mmio_base + R_XHCI_MEM_U2PRM_U2PRDE where the offset register R_XHCI_MEM_U2PRM_U2PRDE has value 0x92f4. Validated various USB3 devices enumeration. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia370a449a41701e690c1c507d70bedfce2076a65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2021-01-12util/ifdtool: Add coreboot build system supportPatrick Georgi
When building as part of the coreboot build system, use the same mechanism as other tools (cbfstool, amdfwtool, ...) so that abuild builds ifdtool once into sharedutils instead of once per board (while avoiding other race conditions, too). Change-Id: I42c7b43cc0859916174d59cba6b62630e70287fd Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-12soc/intel/denverton_ns: Drop redundant `DEFAULT_ACPI_BASE`Angel Pons
It is only used in one place, and there's two other equivalent macros. Change-Id: I7c8241e28f688abd2df8180559dd02ee441c7023 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-12Documentation: Fix toctree and remove dead linksPatrick Rudolph
Change-Id: Ie3c7c33096f60a5aa476ff55c538fe68ffadc068 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-12Documentation: Add known bugs of x86_64 code on real hardwarePatrick Rudolph
The bugs happen on real hardware or in qemu with KVM enabled. The very same code runs on some real devices and it runs in qemu with KVM disabled. The bugs are so strange that no root cause could be found yet. Change-Id: I01050f2e38f92c6b96e3258a5b619aa9ee685acc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-12cpu/x86/sipi_vector: Simplify loop getting unique CPU numberPatrick Rudolph
Get rid of using eax and reload counter on race condition. Change-Id: Ie4b9957d8aa1f272ff1db5caf2c69d1e1f086a03 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47714 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12device/pci_device.c: Use same indents for switch/caseFelix Singer
Use same indents for switch/case to fix linter issues. Change-Id: I5c6abf5b918bac3df8d7617824392f2ec932cb32 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-12util/superiotool: Add IT8720F EC registersMichael Büchler
Registers and their default values are from the datasheet ("IT8720F", "Preliminary Specification V0.1"). Tested on an Acer G43T-AM3. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: I69987be4f5cb50b3c20f06733f30b308891d5ad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-12soc/intel/common/pcie: Add helper function for getting mask of enabled portsFurquan Shaikh
This change adds a helper function `pcie_rp_enable_mask()` that returns a 32-bit mask indicating the status (enabled/disabled) of PCIe root ports (in the groups table) as configured by the mainboard in the device tree. With this helper function, SoC chip config does not need to add another `PcieRpEnable[]` config to identify what root ports are enabled. Change-Id: I7ce5fca1c662064fd21f0961dac13cda1fa2ca44 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48968 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12device: Use __pci_0_00_0_config in config_of_soc()Furquan Shaikh
This change updates the definition of config_of_soc() to a macro that expands to __pci_0_00_0_config instead of accessing the config structure by referencing the struct device. This allows linker to optimize out unused portions of the device tree from early stages. With this change, bootblock .text section size drops as follows: Platform | Size without change | Size with change | Reduction | ---------------|---------------------|------------------|-------------| GLK (ampton) | 27112 bytes | 9832 bytes | 17280 bytes | APL (reef) | 26488 bytes | 17528 bytes | 8960 bytes | TGL (volteer2) | 47760 bytes | 21648 bytes | 26112 bytes | CML (hatch) | 40616 bytes | 22792 bytes | 17824 bytes | JSL (waddledee)| 37872 bytes | 19408 bytes | 18464 bytes | KBL (soraka) | 31840 bytes | 21568 bytes | 10272 bytes | As static.h is now included in device.h which gets pulled in during the unit tests, a dummy static.h is added under tests/include. Change-Id: I1fbf5b9817065e967e46188739978a1cc96c2c7e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49215 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-12soc/intel/alderlake: Add PCH ID 0x5182Subrata Banik
TEST=Able to build and boot ADLRVP. Change-Id: Ia331998b46abcf10e939078dea992589f09139bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49301 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12drivers/genesyslogic/gl9763e: Add HS400ES compatibility settingsBen Chuang
By default, the HS400 mode of GL9763E is slow mode (150MHz). Therefore, the slow mode is disabled for HS400 running at 200MHz. For eMMCs such as Hynix (H26M74002HMR) on HS400, adjust the internal Rx latch dealy of HS400 to have better compatibility. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I84844c2432d4223d9929182c5c430915e52875b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/zork/var/vilboz: Fix FW_CONFIG_SHIFT_WWAN valueJohn Su
The FW config takes 2 bits for USE_FAN[27,28]. So FW_CONFIG_SHIFT_WWAN value should be 29. BUG=b:174121847 BRANCH=zork TEST=build vilboz Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ica6d04f9c48aa0800189283608bf57416ac75cf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49236 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11cpu/intel/haswell: Add delay for TPM before Flex Ratio rebootAngel Pons
Commit 542307b815 (broadwell: Add small delay before Flex Ratio reboot) introduced a workaround for Broadwell. Implement it on Haswell as well. Since this is only necessary when a TPM is present on a system, only do the delay (which is not that small, to be honest) on TPM-enabled builds. Change-Id: Id8b58e9fa2a1c81989305f5b4b765b82c01e1596 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46941 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11cpu/intel/haswell: Allow tuning VR for C-state operationsAngel Pons
Apply commit ff0f460e76 (broadwell: Add configuration for tuning VR for C-state operations) to Haswell, in preparation for unification. Change-Id: Ib05974e8ed0f73c4f475b90065e8efb14555f9c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46920 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11cpu/intel/haswell: Raise PSI1 threshold to 20AAngel Pons
Haswell reference code version 1.9.0 uses the same value as Broadwell. Change-Id: I979ea1b4ba2962bd0c55cfb9d0c291f32cf5fcad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46919 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11cpu/intel/haswell: Enable turbo ratio if availableAngel Pons
Commit 7f28e4ee01 (broadwell: Enable turbo ratio if available) is also applicable to Haswell, since the MSR definitions are the same for both. Change-Id: Ic5f30a5b06301449253bbfb9ed58c6b35a767763 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46918 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11cpu/intel/haswell: Do not set PMG_IO_CAPTURE_BASE MSRAngel Pons
The MSR only needs to be set when IO MWAIT redirection is to be enabled. This was copied from Sandy Bridge, which already had this inconsistency. Change-Id: I424333afd654db9a7e180e9a2c31d369e3d92fd6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46917 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11libpayload/lpgcc: Drop redundant linker pathNico Huber
It either doesn't exist (in-tree builds) or is the same as $_LIBDIR. Change-Id: I9551cbfc3295d86c22a3785be7cdc0f65eeb08c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47632 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11libpayload/lpgcc: Set proper include paths for in-tree buildsNico Huber
We only need `$_OBJ` in the include path for in-tree builds. Also, curses only need special handling for those and PDCurses turned out to need many more include paths. Change-Id: Idd29ef33065033e26ba61b09d412d8ca3566d643 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-11libpayload/lpgcc: Add more variables to support in-tree buildsNico Huber
Add $_DOTCONFIG and $_XCOMPILE pointing to the respective files and use them. Change-Id: I719b42d1c8abf055948daf5b000daa30cd249edd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-11mb/google/octopus: add audio codec into SSFC support for MeepTony Huang
BUG=b:171757619 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I37390535e263b4b9547ad7307278e3360ba836bd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-01-11drivers/genesyslogic/gl9763e: Fix boot on eMMC failed issue on VolteerRenius Chen
Booting on Kingston (EMMC64G-TA29/TX29-HP) and Hynix (H26M74002HMR) eMMC currently fails due to R/W error. This is a workaround to finetune the data latch timing by verdor-specific setting of GL9763E. For improving the compatibility of GL9763E with these two eMMC. Signed-off-by: Renius Chen <reniuschengl@gmail.com> Change-Id: Iddb145ed6a9edb2d7a50248e64659cda78b88ae6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11soc/intel/{icl,tgl,jsl,ehl}: add LPIT supportMichael Niewöhner
Add SLP_S0 residency register and enable LPIT support. Change-Id: Id1abbe8dcb7796eeb26ccb72f1f26cf7a040dba4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49048 Reviewed-by: Lance Zhao Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/skl: add SLP_S0 residency register and enable LPIT supportMichael Niewöhner
Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. Change-Id: Icccd9d15a9e9a22c9bfe7a9843e95d77013c9c8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49047 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cnl: add SLP_S0 residency register and enable LPIT supportMichael Niewöhner
Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. - Windows and Linux tested on google/akemi - Linux tested on clevo/cml-u Change-Id: I51fdf52419aa7f059b70a906fd8bdac88d5b6046 Tested-By: Matt DeVillier <matt.devillier@gmail.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49046 Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11acpi,soc/intel/common: add support for Intel Low Power Idle TableMichael Niewöhner
Add support for the Intel LPIT table to support reading Low Power Idle Residency counters by the OS. On platforms supporting S0ix sleep states there can be two types of residencies: * CPU package PC10 residency counter (read from MSR via FFH interface) * PCH SLP_S0 assertion residency counter (read via memory mapped interface) With presence of one or both of these counters in the LPIT table, Linux dynamically adds the corresponding attributes to the cpuidle sysfs interface, that can be used to read the residency timers: * /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us * /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us The code in src/acpi implements generic LPIT support. Each SoC or platform has to implement `acpi_fill_lpit` to fill the table with platform-specific LPI state entries. This is done in this change for soc/intel/common, while being added as its own compilation unit, so SoCs not yet using common acpi code (like Skylake) can use it, too. Reference: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Test: Linux adds the cpuidle sysfs interface; Windows with s0ix_enable=1 boots without crashing with an INTERNAL_POWER_ERROR. - Windows and Linux tested on google/akemi together with CB:49046 - Linux tested on clevo/cml-u, supermicro/x11ssmf together with CB:49046 Change-Id: I816888e8788e2f04c89f20d6ea1654d2f35cf18e Tested-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11{soc,vc,mb}/intel: Drop support for Cannon Lake SoCFelix Singer
Drop the support for the Intel Cannon Lake SoC for various reasons: * Most people can't use coreboot on Cannon Lake, since the required FSP binaries aren't publicly available. Given that FSP binaries for several newer platforms have been released, it's very unlikely that Cannon Lake FSP will ever be released. * It seems there is no interest in this, since the reference mainboard is the only available mainboard in tree. Also, remove the related reference mainboard intel/cannonlake_rvp and its FSP headers in intel/fsp2_0/cannonlake. Change-Id: I8f698e16099acb45444b2bc675642d161ff8c237 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48775 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/volteer: Add CSE Lite SKU support to DrobitWayne3_Wang
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:176536593 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: Wayne3_Wang <wayne3_wang@pegatron.corp-partner.google.com> Change-Id: I69962a5b7c7c464280b35c834f7ee1c9b77db6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/49197 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11util/sconfig: Emit chip config pointers for PCI devices on root busFurquan Shaikh
This change emits chip config pointers for PCI devices on root bus in static_devices.h so that the config structure can be accessed directly without having to reference the device structure. This allows the linker to optimize out unused parts of the device tree from early stages like bootblock. Change-Id: I1d42e926dbfae14b889ade6dda363d8607974cae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49214 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/amd/cezzane: Add a minimal chipset treeFurquan Shaikh
This change adds a minimal chipset tree with only two devices: 1. Domain 2. GNB root complex This allows sconfig to generate the config structure for SoC root device that is used by config_of_soc(). Change-Id: I7e08ecf4b9556dc9325bd5a6a51566a949ceb73f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-01-11util/sconfig: Change __pci*|__pnp* device pointers to constFurquan Shaikh
This change updates the device pointers exposed in static_devices.h to const instead of DEVTREE_CONST. The pointer itself doesn't really need to be DEVTREE_CONST. Change-Id: I061b05d994fc5c4156ee8bddabadf940f0aeeac3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-11soc/intel/common/uart: Use simple(_s_) variants of PCI functionsFurquan Shaikh
This change updates various uart_* functions to use simple(_s_) variants of PCI functions. This is done for a few reasons: * __SIMPLE_DEVICE__ check can be dropped since the same data type can be used in early stages and ramstage. * Removes the requirement on early stage to walk the device tree to get access to the device structure. This allows linker-based device tree optimizations for early stages. As part of this change, uart_get_device() is refactored and a new function uart_console_get_devfn() is added which returns pci_devfn_t in MMCONF format. It is then used directly by the _s_ variants of PCI functions. Change-Id: I344037828118572ae5eb27c82c496d5e7a508a53 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-11soc/intel/uart: Drop SoC callback `soc_uart_console_to_device`Furquan Shaikh
This change renames `struct uart_gpio_pad_config` to `struct uart_controller_config` and adds a new parameter devfn (which expects devfn for the UART controller corresponding to the index in PCI_DEVFN() format). This gets rid of the SoC callback to get `struct device` pointer to the UART controller device. Change-Id: Id0712a0038f2cc1a61b8b5a58fa155f14e7949a5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49212 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cnl: Allow setting PCIe subsystem IDs after FSP-SJeremy Soller
Prevent the FSP from writing its default SVID SDID values of 8086:7270 for internal devices as this locks most of the registers. Allows the subsystemid values set in devicetree to be used. A description of this SSID table override behavior, along with example code, is provided in the TigerLake FSP Integration Guide, section 15.178 ("SI_CONFIG Struct Reference"). The xHCI and HDA devices have RW/L registers rather than RW/O registers. They can be written to multiple times but cannot be modified after being locked, which happens during FspSiliconInit. Because coreboot populates subsystem IDs after SiliconInit, these devices specifically must be written beforehand or will otherwise be locked with their default values of 0:0. Tested by checking lspci output on System76 galp3-c (WHL), oryp5 (CFL), and oryp6 (CML). References: - TigerLake FSP Integration Guide - Intel Document Number 337868-002 Change-Id: Ieaa45ef7fa8e0da4a25b9174ded1ea0c5d9c4b4e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49104 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
While FORCE_PWR is set high, it prevents retimer from entering low power state. S0ix failure occurs while USB4 Gatkex is connected on Port-0. This change sets FORCE_PWR(GPP_H10) low. This FORCE_PWR GPIO will be toggled by kernel through DSM method while updating retimer firmware. BUG=b:174166586 Cq-Depend: chromium:2594438 TEST=Verifed s0ix cycles with USB4 Gatkex connected on Port-0. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie4b442e1078379c522a94bfdc00cd99e6f9b8170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11soc/amd/picasso: Separate GPIO define into gpio_defs.hEric Lai
Separate GPIO define into gpio_defs.h, then we can use it in asl include. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If2a779eae228f621e77610889205853de2fb179a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-11vc/intel/FSP2_0/CPX-SP: update to FSP ww01 releaseJonathan Zhang
With Intel CPX-SP FSP ww01 release, CidBitMap field is added to DimmDevice struct in hob_memmap.h. The copyright statements were updated to accomodate year 2021. gpio_fsp.h is not needed any more as coreboot takes over GPIO configuration. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3242c8b50401757a28de8a9e9c71fb95bc0515dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/49246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-11vendorcode/intel/fsp: Update Tiger Lake v3444 FSP HeadersSrinidhi N Kaushik
Update v 3444 FSP headers for Tiger Lake platform to include the below 2 UPDs to control TC cold support usb connect or not. FSPS: Usb3ComplModeEnable DisableTccoldOnUsbConnected BUG=b:173054070 TEST=Build and boot on delbin. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I68b32730293fc83b5088074f71fa215220574748 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11mb/emulation/qemu: Copy page tables to DRAM in assemblyPatrick Rudolph
To work around various bugs running KVM enabled, copy page tables to DRAM in assembly before jumping to x86_64 mode. Tested on QEMU using KVM, no more stange bugs happen: Tested on host - CPU Intel(R) Core(TM) i7-7700HQ - Linux 5.9 - qemu 4.2.1 Used to crash on emulating MMX instructions and failed to translate some addresses using the virtual MMU when running in long mode. Tested on host - CPU AMD EPYC 7401P 24-Core Processor - Linux 5.4 - qemu 4.2.1 Used to crash on jumping to long mode. Change-Id: Ic0bdd2bef7197edd2e7488a8efdeba7eb4ab0dd4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-11mb/google/dedede/var/magolor: Remove the unused touch controllerRen Kuo
Remove unused touch controller - Goodix BUG=None BRANCH=dedede TEST=build firmware Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I2a01666bc1e353e21ddf961a0eb721a0cb4013db Reviewed-on: https://review.coreboot.org/c/coreboot/+/49221 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11soc/intel/cannonlake: Enable wake from USB in S4Patrick Rudolph
The xHCI controller supports waking the system from S1-S4. Thus specify that the deepest sleep state is S4 in _PRW. Tested on Prodrive/hermes. The board now wakes from S4 as well by pressing a key on the USB keyboard. Change-Id: I0bb266e70ee6b4eb8922671b7d0078db0d29a1da Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49224 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10nb/intel/gm45: Guard macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: I023bb116fa2bdcaa7cfdce2445513da3959e827d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45435 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10nb/intel/gm45: Guard `CxDRBy_BOUND_SHIFT` macro parametersAngel Pons
Wrap `r` in parentheses to avoid unexpected behavior with compound expressions. This prevents `CxDRBy_BOUND_MB(r+1, base)` from triggering undefined behavior when `r = 2`, as the shift would be greater than 32. Change-Id: I14235b2708ab502d842da677451c14203a469b45 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49261 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10device: Add new Kconfig VGA_ROM_RUN_DEFAULT for mainboard userSubrata Banik
Platform can now select VGA_ROM_RUN_DEFAULT Kconfig to perform graphics initialization for PCI-E based discrete card through VGA OpRom (SoC or Mainboard user can't select VGA_ROM_RUN directly because it's part of choice option). (Note: Some payloads, like SeaBIOS, are also able to run Option ROMs, so coreboot does not need to enable VGA_ROM_RUN Kconfig) For payload like depthcharge, create VGA_ROM_RUN_DEFAULT Kconfig for mainboard to select design with DGPU where OpROM is embedded inside the DGPU card. Allow auto selection of VGA_ROM_RUN_DEFAULT from VGA_BIOS Kconfig. Also NO_GFX_INIT Kconfig to avoid running VGA_ROM_RUN by default in case SeaBIOS is used. TEST=Able to get Pre-OS splash screen with AMD Radeon RX 5700 PCI-E DGPU when mainboard user selects VGA_ROM_RUN_DEFAULT. Change-Id: Iecb2fcdb105af449bc20ad727759cdef17d5e376 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49016 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/intel/adlrvp: Update GPIOs as per latest schematicsSubrata Banik
1. GPP_D8, GPP_H23 => Remove unused GPIOs 2. GPP_E18 .. GPP_E22 => Program the correct Native Functions for GPIO Change-Id: Iedb1f8fbf5f96a9617b72ba1a6419e3fd4e331b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49260 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/intel/adlrvp: Fix FW download failed for PEG 060, 010Subrata Banik
Enable PCIE RP1 to fix DEKEL FW download failed for x4 controller (PEG 0:6:0). Enable PCIE RP3 to fix HSPHY FW download failed for x8 controller (PEG 0:1:0) BUG=b:176940923 TEST=No FSP error seen while loading DEKEL, HSPHY FW. Change-Id: I3cd8cba02a96185803a0c0d442f3d6aa495d2642 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-10soc/intel/alderlake: Refactor SoC code to maintain CPU and PCH PCIE RPsSubrata Banik
List of changes: 1. Create new Kconfig MAX_CPU_ROOT_PORTS and MAX_PCH_ROOT_PORTS as per EDS. 2. Add new chip variable to enable/disable CPU PCIE RPs from mainboards. 3. Rename PcieRpEnable to PchPcieRpEnable. 4. Enable CPU RPs as below in mainboard devicetree.cb RP1: PEG60 : 0:6:0 : CPU SSD1 RP2: PEG10 : 0:1:0 : x8 CPU Slot RP3: PEG62 : 0:6:2 : CPU SSD2 Change-Id: I92123450bd7cfb2e70aae8de03053672a7772451 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49136 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/broadwell: Use `mp_cpu_bus_init`Angel Pons
This is needed to allow switching to Haswell CPU code in the future. Change-Id: Ic642f32f9c4a269a66ac470b7a7217f20ff8bfba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46886 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10superiotool/nuvoton: Set NCT6791D GPIO inputs to NANANico Huber
There were several default values given for GPIO data and status registers. As all GPIO are configured as inputs by default, we can't predict the values of these registers, hence set their default values to NANA. Change-Id: I0507dd75e0f2a5c7e4d2e9cdbe1f860b544deac3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Clay Daniels <clay.daniels.jr@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-10cpu/intel/haswell/haswell.h: Align with BroadwellAngel Pons
Sort MSR definitions, move MCHBAR registers to northbridge and relocate C-state latency macros into the header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3b02f1b1eff522c037e6fc8bb0d831423913da29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46914 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10cpu/intel/haswell: Align cosmetics with BroadwellAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3eb522a48edf9e8fc7664141253ae4e2072d71fa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46913 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10cpu/intel/haswell: Do not determine CPU type at runtimeAngel Pons
It is already known at compile-time. Change-Id: I20303cd1f79b71268a9d734c85a1291afe9177e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46912 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel/bd82x6x: Use `PCH_LPC_DEV` macroAngel Pons
Change-Id: I681bb126546b5a7bda3f1bac05c345d2cf60b178 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-10util/autoport: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ia8d7083ca2f21abbb5f184c1b55dcf1bf047a7be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-10mb/google/cyan: Move board_id() to mainboard_fill_gnvs()Kyösti Mälkki
Only a google/cyan variant evalutes BDID in ASL. Change-Id: I3d839333333b4762ae5350734c85471a3c12838a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Add missing include in nvs.hKyösti Mälkki
Change-Id: Ic779a668ebaa4f0c9bdef95fd6de8f0179e8a534 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49004 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Rename to soc_fill_gnvs()Kyösti Mälkki
Replace acpi_create_gnvs() under soc/ to reflect their changed funcionality. Change-Id: I7bdbe0d6f795252e713e9785ada2b6320e6604b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48717 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Replace acpi_init_gnvs()Kyösti Mälkki
Rename these to soc_fill_gnvs() and move the callsite away from mb/. Change-Id: I760c36f65c6122103f2be98fc11ee13832c2772e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48716 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel: Use acpi_inject_nvsa()Kyösti Mälkki
Change-Id: I5f1762c4a25631af9d29a2cb038620d9e9698f8b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48715 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10sb/intel: Factor out soc_fill_gnvs()Kyösti Mälkki
Name the common part of GNVS initialisation as soc_fill_gnvs(). It is also moved before the call to acpi_create_gnvs(), which followup will rename to mainbord_fill_gnvs() to reflect that implementation is under mb/. Change-Id: Ic4cf1548b65a86212d6e45d460fcd23bb8036365 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48706 Reviewed-by: Lance Zhao Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Replace uses of CBMEM_ID_ACPI_GNVSKyösti Mälkki
Change-Id: I45a2d9cb7f07609a1ff03fd70f17c3f2d4f013b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48705 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel/braswell: Refactor acpi_init_gnvs()Kyösti Mälkki
Move GNVS details to different function, called from acpi_create_gnvs(). Change-Id: Ief02c078fe37753c0d29418394a351105a1aacc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48704 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:05:26 +0000