summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-11tegra124_lp0: make sure to build with compiler.h includedPatrick Georgi
Fixes builds of that binary in clean trees. Change-Id: If5a995449a74c00da836fcf22bda44ebc8197518 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-11commonlib/storage: Make pci sdhci code compile in romstageBora Guvendik
In romstage malloc is not available, so use CAR_GLOBAL variable instead. BUG=b:78106689 TEST=Boot to OS Change-Id: If9438d0b707c6ffaa61db80bd1d385112bc91cfc Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/25067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11riscv: add physical memory protection (PMP) supportXiang Wang
These codes are written by me based on the privileged instruction set. I tested it by qemu/riscv-probe. Change-Id: I2e9e0c94e6518f63ade7680a3ce68bacfae219d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28569 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11soc/intel/common/block/gpio: check for NULL using if statementBora Guvendik
Remove assert() and instead use if statement to check if comm->groups is NULL. Found-by: klockwork BUG=None TEST=Boot to OS Change-Id: I85a6bc700b52d04c61ca8f2baac62000f40cf2cb Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11mb/google/octopus: I2C clock tuning for meepWisley Chen
Tune I2C params for I2C buses 0, 5, 6, and 7 to ensure that the frequency does not exceed 400KHz. BUG=b:117298114 TEST=emerge-octopus coreboot chromeos-bootimage and measured frequency under 400 KHz Change-Id: Id608aae7edf54a24f364606dd7952521d1d67c1a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11Documentation: Improve message printed by livesphinx targetJonathan Neuschäfer
Printing "Autobuild finished" after the autobuild server exits (which normally doesn't happen) is not very useful. Change-Id: I909d7ab5f399993dbb1916e66ba94c48d7bc53bf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11Documentation: Add and link the arch directoryJonathan Neuschäfer
Fixes: b159d5ba8f ("riscv: add documentation for stages and payloads") Change-Id: I5ca8ed094c9b6d115da707375205872e782a66b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11Documentation/releases: Improve readabilityJonathan Neuschäfer
A colon usually indicates that something related follows. But in Documentation/releases/index.md, nothing followed. Fix this by swapping two lines. Change-Id: I3e2750c208a2b725145b94615f64381ac763f0dc Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-11payloads/tianocore: Fix not applying patch 06_CorebootPayloadPkg_keep_cb_tablePiotr Król
Mentioned patch could not be applied in coreboot-sdk:1.52. With this fix patch apply correctly. Change-Id: I130856520f91bcfbd9a62741b1d5abb6495a6eac Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-11mb/cavium/cn8100_sff_evb: Only expose two UARTsPatrick Rudolph
Only two UARTs are connected to the FTDI UART USB chip. Change-Id: Id5ae7266ce44c9f64c7f7aeaf23c49122041f47a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-10soc/intel/skylake: Set PCIEXPWAK_DIS if WAKE# pin is not enabledFurquan Shaikh
This change sets PCIEXPWAK_DIS in PM1_EN register if WAKE# pin is not enabled on the platform. This is required to prevent unnecessary wakes if the WAKE# pin remains not connected on the platform. Function to set PCIEXPWAK_DIS gets called in normal boot path (BS_PAYLOAD_LOAD) as well as S3 resume path (BS_OS_RESUME). BUG=b:117284700 TEST=Verified that no spurious wakes are observed on nocturne. Change-Id: Iea93baffc9bb703c0ffedacafc6a9a9410c7ebfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-10mb/google/octopus: Drop I2C bus 0 clock frequency for Phaserpeichao.wang
Need to tune I2C bus 0 clock frequency under the 400KHz since this bus attached the Stylus EMR pen and need meet the spec. Bug=b:117297214 TEST=flash coreboot to the DUT and measure I2C bus 0 clock frequency whether under 400KHz Change-Id: I06d9d25f52d7f641d937de0d6b7df3d7a076fbf9 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28973 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10lib: increase part number size in memory_info/dimm_infoAaron Durbin
The dimm_info and memory_info structs are used in devices that don't strictly use DIMMs. Those platforms have the DRAM soldered down so there's no DIMM part number that encapsulates the DRAMs used in the DIMM. The full part number is desired to be exposed in the SMBIOS tables. As such extend DIMM_INFO_PART_NUMBER_SIZE to 33 to accommodate longer part numbers 'MT53B256M32D1NP-053 WT:C' is one of the longer part numbers that are desired to be maintained. BUG=b:115697578 Change-Id: I0c39dd1d1c2f0776d70d8c4d8d56719779ff82ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-10soc/cavium: dynamic UART initialization for cavium cn8100Jens Drenhaus
Now only those UARTs that are enabled in devicetree.cb are initialized. Tested on Opencellular Elgon. Change-Id: I145c224148f0cc078bb1c76f588f603e73121a62 Signed-off-by: Jens Drenhaus <jens.drenhaus@9elements.com> Reviewed-on: https://review.coreboot.org/28975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-10mb/google/poppy/variants/nami: Add samsung_dimm_K4AAG165WB-MCRC SPDChris Zhou
Add SPD file for sdp samsung_dimm_K4AAG165WB-MCRC (ram id: 9) BUG=b:112679174 TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Iac1e3ca4b009cc9be94608cd342f535fa581a5eb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28974 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee/variants/*/devicetree.cb: Reset I2C slavesRichard Spiegel
Use the new I2C slave reset function and reset all slaves connected to all 4 I2C. Do this in all boards. BUG=b:114479395 TEST=Added debug code. Build and boot grunt. Examined output, confirmed GPIO pins changing as required. Removed debug code. Change-Id: Ia78ee5d5319d3c1a7daa9c56c81d435999b3a359 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28575 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee: Add delan variantMartin Roth
BUG=b:117173908 TEST=Build delan Change-Id: If149b8c43ff16637c38d5320eb606bb72d62e953 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-10mb/google/fizz: Prepare sharing directory for variantsDavid Wu
Clean up Kconfig file in order to support variants for fizz. Add BOARD_GOOGLE_BASEBOARD_FIZZ that can be set by various fizz variants to use the common baseboard configs. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: I9c89f1dc526a9d623e1ae4d4b52a923489b389d3 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-10mediatek/mt8183: Init PLLs for DRAMTristan Shieh
Set up DRAM related PLLs. And update post divider table to fulfill all freqency settings. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic197cef7d31f75ffe4e7d9e73c9cc544719943ab Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/28667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-10-10.gitignore: Spell Documentation in uppercaseJonathan Neuschäfer
Fixes: 4d8b843d37 ("Rename documentation -> Documentation") Change-Id: I423cb159ca3c837ed52937dc6d76d9a43a069256 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-10util/superiotool/smsc.c: Add SCH5504 register dumpAngel Pons
There is no datasheet available for this SuperIO, but dumping all possible registers on a Dell Optiplex GX520 resulted in data that was similar to other supported chips. Data also matches what is set in the BIOS, e.g. the parallel and serial ports' addresses. Change-Id: I768e4b5ec1e73c53e1a2355e0a0657b7a5ccbb89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-09soc/intel/cannonlake: Add PCIE ASL entrySubrata Banik
This patch creates _PRT entires for each PCIE root port devices. TEST=Able to see PCIE wake device in cat /proc/acpi/wake list Change-Id: I183c89c92139e15e0bfc39620710dbdc6597b351 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Make correct IRQ mapping for CNL SA and PCH PCI devicesSubrata Banik
This patch provides option for PCI IRQ mapping in both PIC and APIC mode. TEST=Build and Boot on CNL RVP. Change-Id: Ie26750ac9dc2ce940b0c116085c041de439075df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/acpi: Fix ACPI Namespace lookup failure, AE_ALREADY_EXISTS ↵Subrata Banik
issue This patch fixes below ACPI compilation issue: Found 1 external control methods, reparsing with new information Pass 1 parse of [DSDT] ACPI Error: [EPCS] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [EMNA] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [ELNG] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) Pass 2 parse of [DSDT] ACPI Warning: NsLookup: Type mismatch on EPCS (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on EMNA (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on ELNG (Integer), searching for (RegionField) (20160318/nsaccess-664) Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions) TEST=Able to build sgx.asl without any ASL error. Change-Id: If4e7d4c66b6aab6c081fa272d8c2c9a1f0651ef7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/block/pcr: Add NULL pointer check in pcr_execute_sideband_msg()Subrata Banik
This patch to fix KW issue due to msg, data and response pointers NULL check fail. Change-Id: I39324514079f240ba1683a04e579de85485299bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Disable Legacy PME for Root portsSubrata Banik
Legacy PME are enabled by default in FSP-S UPD. This policy sets PME Interrupt Enable (PIE) bit of RCTL register to trigger interrupt generation when RSTS.PS state has changed (either due to 0->1 transition or due to this bit being set with RSTS.PS already set). Due to this interrupt generation, system wakes from sleep immediately it enters. This patch overrides root port legacy pme upd policy from coreboot to ensure no false SCI is triggerd when system is in S3/S0ix state. BUG=b:113083354 BRANCH=none TEST=Able to make S3 resume using wake on wifi connect/disconnect usecase without any failure. Change-Id: I779fac711eeeed65ea379fad1cc400052d8a00eb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Iea9356b4404d2fa49ea62ef7bc2c72f125054ff3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-09soc/intel/skylake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/pch: Select Kconfig for ITSS polarity configurationSubrata Banik
This patch selects Kconfig for Intel Core Platform in order to ensure proper ITSS IPCx programming. Change-Id: I81e75e17ceb23c364b78300c3950144be1580700 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09mb/google/kahlee/variants/liara: Update H1/TP/TS i2c timingsChris Zhou
After adjustment on Liara EVT H1: 392.03 KHz TP: 397.87 KHz TS: 397.71 KHz BUG=b:116309237 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage measure by scope Change-Id: Ib5d7ce09ac58f33ee826d7541e1a0d14a03add9a Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-09payloads: Only show supported payloads in menuconfigPhilipp Hug
Some payloads don't depend on their supported platforms, which makes them visible in menuconfig even if they are not supported (yet). Change-Id: Ia1ec0f0ca0b6521d0c024500c67326337f3d744f Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-09util/cbmem/Makefile: Remove .dependencies on `clean`Nico Huber
Change-Id: Ic122b3eaed54e29bbb3e11de84822169c81c04eb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-08util/superiotool/smsc.c: Add some register dumpsAngel Pons
The SCH3112, SCH3116 and SCH5127 were lacking a pin dump. Since their datasheets are available, add their pin dumps. The SCH3112, SCH3114 and SCH3116 are almost identical, they only differ in the number of serial ports. Some values in the SCH3114 dump were inaccurate, that has been fixed as well. Datasheets used: - SCH311X: DS00001872A - SCH5127: DS00002081A Change-Id: Ic985526be9b09e0452eaf883904dfaf709b7e907 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-10-08mainboard/google/kahlee: Set PSPP setting to BalancedHighAkshu Agrawal
Setting default PSPP setting to BalancedLow was causing audio playback issue in most of the units. With BalancedLow either there was no sound or noise on playback. Switching to BalancedHigh as default option. BUG=b:116553085, b:112020107 TEST=Test playback and hear proper audio. Change-Id: Ibf64d7b8e58e60ce931ddc85f11b135708cdb1ee Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/28967 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08soc/intel/skylake: Fix ‘dev’ pointer NULL before being dereferencedSubrata Banik
This patch fixes KW issue due to pointer being NULL and will be dereferenced Change-Id: Iedb59daf5f448e31c0097873a086e4d08cd4a979 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for BobbaPan Sheng-Liang
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 3 for DVT. BUG=b:115697578 TEST=verified it in Bobba EVT board which rework ram id. Change-Id: I0fb457d8772f5038e5d90188d7682956ddfad46b Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28891 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08smmstore: Add a key/val store facility in flash, mediated through SMMPatrick Georgi
It exposes an interface that is as generic as possible, so payloads and/or kernels can use it for their data. Change-Id: I9553922f9dfa60b9d4b3576973ad4b84d3fe2fb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25182 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/poppy/variant/nocturne: correct wifi wake registerNick Vaccaro
Wifi wake register is incorrectly set in devicetree. Set wifi wake to its correct wake source, GPE0_DW2_01. BUG=b:117330593 TEST='emerge-nocturne coreboot chromeos-bootimage', flash nocture, connect wifi to a hotspot, suspend device, echo freeze > /sys/power/state, and then shutdown the hotspot and verify device wakes. Change-Id: Iafa865ca79d33541d7f47b69d2fb209e7f9c98af Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28938 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/poppy/variant/nocturne: Disable WAKE# signalNick Vaccaro
The WAKE# signal has moved to LAN_WAKE, so WAKE# is now floating and must be disabled. This change disables WAKE#. BUG=b:117284700 TEST=none Change-Id: I1c25e4ba28cd2b8807cd155d47c29c0d3ee9e8a5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-08nb/intel/{gm45,i945,pineview}: Use macro instead of GGC addressElyes HAOUAS
Change-Id: I233e835180fd445961b6deb74ea7afc2821c236e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-10-08Documentation: Improve elgon documentationPatrick Rudolph
* Convert PNG to JPG and reduce image quality. * Mark flash IC and USB serial connector. * Mark SPI programming header. * Add programming header pinout. Change-Id: Ica5958545ed23573a0d48dfa422ad1a822d06b47 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-08util/intelvbttool: Rewrite toolPatrick Rudolph
* Add Makefile dependency to source file * Add argument support * Add help support * Print usage on wrong arguments * Add support for parsing VBT binary file * Add support for parsing PCI Option ROM * Add support for writing VBT binary file * Add support for patching PCI Option ROM * Keep support for accessing legacy VGA area Option ROM * Keep support for dumping VBT contents to stdout Allows to extract VBT, analyse VBT and patch PCI Option ROMs as needed. The required arguments have been changed: ./intelvbttool --<SOURCECMD> [filename] --<DESTCMD> [filename] SOURCECMD set the VBT source. Supported: inlegacy : Legacy BIOS area at phys. memory 0xc0000 invbt : Read raw Intel VBT file inoprom : Read VBT from Intel Option ROM file DESTCMD set the VBT destination. Supported: outdump : Print VBT in human readable form outvbt : Write raw Intel VBT file patchoprom: Patch existing Intel Option ROM Any combination of SOURCECMD and DESTCMD is possible. Change-Id: I8cbde042c7f5632f36648419becd23e248ba6f76 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-06Documentation/mb/sifive: Fix dead linksJonathan Neuschäfer
SiFive's website was reorganized, which broke our links to PDF files. Update these links to the current ones, obtained by browsing https://sifive.com/documentation/. Change-Id: I312de84bf12abb0789bdd971c40033f1e4ea0dd1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-10-06arch/riscv: Update comment about mstatus initializationJonathan Neuschäfer
coreboot does not set up virtual memory anymore. Change-Id: I231af07b2988e8362d1cdd606ce889fb31136ff1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-10-06mb/emulation/*-riscv: Remove "UCB" from RISC-V board namesJonathan Neuschäfer
RISC-V is not a project of the University of California, Berkeley, anymore; it stands on its own feet now. Remove the "UCB" component from the RISC-V mainboards in the "emulation" directory, and don't set MAINBOARD_VENDOR to UCB, either. Change-Id: I301d9d0091a714e62375052e5af06a9197876688 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-10-06soc/intel/common, mb/google, mb/siemens: Use lower case x for RXDFurquan Shaikh
In order to make the macro name consistent for all PAD_CFG1_IOSSTATE_* macros, this change uses lower case x for *RXD*. It helps avoid confusion when using the macros. Change-Id: I6b1ce259ed184bcf8224dff334fcf0a0289f1788 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28924 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06mb/google/poppy/var/ampton: Get rid of min board id for DRAM in CBIFurquan Shaikh
All ampton boards should have the DRAM info configured in CBI and so DRAM_PART_NUM_ALWAYS_IN_CBI is already selected for ampton. This change gets rid of the redundant minimum board id value for Ampton. BUG=b:117071184 Change-Id: I59f60b8c5aa34b55b8e473c06cc49ea7ae284d62 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-06mb/google/octopus/variants/fleex: Disable I2C0 in devicetreeFurquan Shaikh
Fleex does not have any device on I2C0 and hence this change disables I2C0 device (16.0) in devicetree and gets rid of the I2C tuning parameters for I2C0. BUG=b:115600671 Change-Id: Ib799eae05b667cee2272bbd37f0ca44b7cec66cd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-06mb/google/octopus: Disable I2C3 in devicetreeFurquan Shaikh
I2C3 is connected to the debug header and won't be required unless connecting the debugger. This change disables I2C3 device (16.3) in devicetree. Change-Id: I650fa040075119a21864c83d8470dd2155c9edb9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-10-06mb/google/poppy/variants/nocturne: Add DMIC properties to ACPI DSDFurquan Shaikh
This change uses the generic device driver to provide DMIC properties in ACPI table to the OS driver. BUG=b:112888584 Change-Id: I239f571bc29f02793f017a4713b5af03b23cfa3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28797 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06drivers/generic: Add support for providing DSD propertiesFurquan Shaikh
This change adds support in generic device driver to add properties to DSD table. This driver can be used by all generic devices that do not need any special handling other than simply adding device properties to be used by OS. BUG=b:112888584 Change-Id: I0ca6614f1ef322397618676bbf6da898bef18990 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28796 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/common/block/hda: Enable static scanning of devices under HDAFurquan Shaikh
This change sets scan_bus operation for HDA to scan_static_bus to allow enumeration of static devices under HDA. BUG=b:112888584 TEST=Verified that devices added under HDA get enumerated on Nocturne. Change-Id: I20759c2b702b2f107f0913e7ce92a82c6070ddc4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/.../hda: Add and use config for initialization of HDA codecsFurquan Shaikh
Config option SOC_INTEL_COMMON_BLOCK_HDA is currently used for initialization of HDA codecs only. This prevents adding of any static devices under the HDA device node. However, there can be boards which want to add devices under HDA node (e.g. nocturne that wants to provide DMIC properties to OS) without performing any codec initialization using the HDA. This change: 1. Adds a new config option SOC_INTEL_COMMON_BLOCK_HDA_VERB that can be set explicitly by the boards that want to perform codec initialization. 2. Uses newly added config option is used to guard the initialization functions for the codec. Rest of the device operations can still be used by all the other boards without having to use HDA codec initialization. 3. Selects the newly added option SOC_INTEL_COMMON_BLOCK_HDA_VERB in kblrvp which is the only board enabling HDA codec initialization using common block code. 4. Selects original config SOC_INTEL_COMMON_BLOCK_HDA for skylake SoC. Above changes need to be bundled and pushed in as a single change in order to avoid breaking existing users. BUG=b:112888584 Change-Id: Ie6f39c13a801833b283120a2d4b6f6175688999c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-05Documentation/mainboard/gigabyte/ga-h61m-s2pv: Expand pageAngel Pons
Uniformize the Yes/No in the tables, expand the internal programming section and explain how to patch a defective flash descriptor. Change-Id: I972bb8948c29ce0eba46daa92ce6b6052db7b063 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-05soc/intel/skylake: check for NULL with if conditionPratik Prajapati
This patch removes assert() and checks if the dev is NULL with "if" condition only. Found-by: klockwork Change-Id: Icd2c8490c8bda14ecd752437d463a7110fe40aea Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/28888 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05mb/google/octopus: adjust Bobba I2C CLK under 400KHzPan Sheng-Liang
Need to tune I2C bus 0/6/7 clock frequency under the 400KHz for digitizer, touchpad, and touchscreen. Bug=b:117126484 TEST=flash coreboot to the DUT and measure I2C bus 0/6/7 clock frequency whether can <400KHz Change-Id: Icb9592c688b864a21efd4963a4463845dfaa06fb Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28907 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05tpm2/tlcl_send_startup: correct TPM2_Startup error logicJoel Kitching
BUG=b:114018226 TEST=compile coreboot Change-Id: Iffad582d5c19252dde1c9dc97fc7fd145944a3b3 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-053rdparty/fsp: update to current masterPatrick Georgi
This includes the SplitFspBin.py script. Change-Id: I6323a7a1a2bd9b5e11c0b21e5ea991a3fbd3daac Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-05LinuxBoot/arm64: Remove firmware from defconfigPatrick Rudolph
The extra firmware is not part of upstream kernel. Fixes build error if the firmware is not present. Change-Id: Ifbcb0bb0e2edf3aa260b40dfa339812019f9f0b3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-05drivers/spi/winbond: Add new chipPatrick Rudolph
The W25Q128J is a QSPI flash chip, without ~HOLD and ~WP. Add the device id to make coreboot boot from it. Change-Id: I623fdf7d7e30eb28259bec6294785ad873f1f503 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-05src/lib/edid.c: Replace #if 1 with something usefulAngel Pons
Since `#if 1` is rather useless, and the code inside it is just several `printk(BIOS_SPEW)`, using `if (console_log_level(BIOS_SPEW))` instead seems more reasonable. Change-Id: I93dcab3db958480626fea6d99ab5289ebff04e8f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-05mb/google/poppy/variants/nautilus: Change SlowSlewRate settings for LTE skuSeunghwan Kim
Nautilus-LTE sku shows abnormal reset symptom at high temperature chamber test, but the root cause is unclear. Experimentally, setting SlowSlewRate IA/GT/SA to 1/2 improves this abnormal reset issue, so we would apply it until find root cause of this issue. BUG=b:117130599 BRANCH=poppy TEST=Built and passed on reliability test with modified coreboot Change-Id: I7fa0041989113097e3b283dbcf4ca2a73629fe54 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28785 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05src: Fix MSR_PKG_CST_CONFIG_CONTROL register nameElyes HAOUAS
Change-Id: I492224b6900b9658d54c8cf486ef5d64b299687f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-10-05atlas: control touchscreen power using ACPICaveh Jalali
This adds the ACPI controls for power sequencing the touchscreen. The initial setting is to keep the touchscreen powered off and in reset. When linux is ready to talk to the touchscreen, it powers it on and releases reset via ACPI. BUG=b:110286344 TEST=verified touchscreen is functional in chromeos Change-Id: I58c42a8f09342cfe54f82ef0e6cd8ea72a5140dc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-05amd/stoneyridge: Comment PCI and AcpiMmio registers in ASLMarshall Dawson
TEST=Build Grunt BUG=b:77602074 Change-Id: I24a46cc3e766ba7e9199723b042476064a698bf2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-05amd/stoneyridge: Remove unused registers from ASLMarshall Dawson
Remove AcpiMmio and PCI config registers that are not used. TEST=build Grunt BUG=b:77602074 Change-Id: I62f40e421eba41c4a49d85efc975096171cb72fa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-05amd/stoneyridge: Remove SATA D0 on suspendMarshall Dawson
Remove the step of setting the SATA controller to S0 as the system is entering S3. This had been duplicated from AMD's FchCarrizo.asl file, but upon closer inspection, the conditions for this step to run cannot be met. This does not affect Grunt's behavior, as the SATA controller is disabled. TEST=Suspend and resume Grunt BUG=b:77602074 Change-Id: Ib269a5363d03c7048abd0c8a9a28df92a773790c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04mb/google/kahlee: Don't set stapm parametersMartin Roth
Setting the stapm parameters is causing S3 resume failures and performance issues. Removing these settings until more testing is done and the issues are solved. BUG=b:117252463, b:116870267 TEST=boot grunt Change-Id: I2299ab81fcc2af0529bfac3be562b05116c64a49 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-04util/autoport: Use romstage.c instead of early_southbridge.cAngel Pons
Until now, autoport used to create a dummy "romstage.c", then write romstage code to "early_southbridge.c". While it works, it makes more sense to write to "romstage.c" instead, as virtually all mainboards do. Change-Id: If9f9375f9a659e7e685de5f884163813261fa656 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28851 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04cbfstool: Clear entry being removed in all casesDaisuke Nojiri
Currently, an entry being removed is cleared only if the next entry is also null or deleted. This patch ensures the entry being removed is cleared regardless of the next entry type. BUG=chromium:889716 BRANCH=none TEST=Run cbfstool bios.bin remove -n ecrw. Verify bios.bin has 0xFF in the space of the removed entry. TEST=Run cbfstool bios.bin remove -n fallback/payload (located at the end). Verify fallback/payload is removed. TEST=Run sign_official_build.sh on recovery_image.bin. Extract firmware contents from chromeos-firmwareupdate in the resigned image. Run 'futility vbutil_firmware --verify' for vblock_A's and FW_MAIN_A extracted from bios.bin. See the bug for details. Change-Id: I62540483da6cc35d0a604ec49b2f2b7b11ba9ce5 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/28886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-04google/grunt: Correctly extract OEM string from CBFSKevin Chiu
In CBFS layout: oem.bin size is 10 bytes. In cbfs_boot_load_file, buffer size will need to be larger than decompressed_size, otherwise CBFS data can not be extracted into buffer. Then we need to check buffer whether it's empty string separately. BUG=b:79874904 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I4f1bbb690ecca515ac920f5058ee19b5bfd8fa5e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/x86/exception: Add ability to ignore unknown interruptsRaul E Rangel
This will make enabling the APIC safer by ignoring unknown interrupts and not halting the system. Once all interrupt sources have been found and handled DIE_ON_UNKNOWN_INTERRUPT can be set if desired. BUG=b:116777191 TEST=Booted grunt, halted the kernel, and pushed the power button while in S5. Verified that depthcharge logged the unknown exception. APIC Init Started APIC Configured Ignoring interrupt vector 39 Change-Id: If4ed566ec284d69786c369f37e4e331d7f892c74 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/x86/exception.c: Remove exception_install_hookRaul E Rangel
Not used by x86 code anymore. BUG=b:116777191 TEST=Validated that depthcharge can be built. Change-Id: I25ad3903989a5433ce73d657cfdb93dd1f34f7b5 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/apic: Register a spurious interrupt vectorRaul E Rangel
We should have a spurious interrupt vector just incase we get one. The handler doesn't need to do anything. BUG=b:116777191 TEST=Booted depthcharge on grunt and inspected the register. I can't generate a spurious interrupt, so I can't validate that the handler gets called. Change-Id: I9e49e617f4375eb5eb00d0715c1902f77e2bf284 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/apic: Only ACK interrupts triggered by the APICRaul E Rangel
Only set end of interrupt (EOI) when the APIC In-Service vector matches the interrupt vector. This makes it so we don't EOI a non APIC interrupt. BUG=b:116777191 TEST=Booted grunt with APIC enabled and verified depthcharge still works. Change-Id: I00bd1e7a0fcf2fc004feadc40d22ebfefe68b384 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04console: Enable CONSOLE_USB by defaultNico Huber
It seems to be the only user of the USB debug driver. So having to enable it separately seems wrong. It still depends on the selection of the EHCI debug driver. Change-Id: I5f5f38a912423d9b8f1e71ae875b6a14fdee651c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-10-04mb/intel/cannonlake_rvp: Move FSP param override function to separate fileRizwan Qureshi
Move the FSP param initialization function to a separate file, as being done on the SoC side and remove the empty romstage.c file. Change-Id: Ibe64bc4ebfdbbb124bcd460dc419da1f469aa7fa Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04soc/intel/cannonlake: Move the FSP related callbacks to separate filesRizwan Qureshi
Move funtions callbacks used to override FSP upd values to separate files. This serves as a base change for SoCs for which FSP is still under development, and hence the FSP header files are not available yet and in turn the UPDs cannot be referred. These newer SoCs will implement empty callbacks. The code will compile with basic header files which only include the architectural FSP structures. This allows plugging in these separate files for compilation in an environment where FSP header files are available. The fact is, FSP header files are not released externally until PRQ. However the teams at intel and some partners have access to the development version of these files. This code refactor helps to continue development on the pre-PRQ silicons and submit related code to coreboot.org. BUG=None BRANCH=None TEST=Build for cnlrvp Change-Id: Iffadc57f6986e688aa1bbe4e5444d105386ad92e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04arch/x86: Make mb/romstage.c optionalRizwan Qureshi
Currently src/mainboard/*/romstage.c is mandatory for compiling, this makes having the file present even though there is nothing to initialize in romstage on the mainboard side. Eliminate the need to have empty romstage.c files using the wildcard function. BUG=None BRANCH=None TEST= build cannonlake_rvp after removing the romstage.c file. Change-Id: Id6335a473d413d1aa89389d3a3d174ed4a1bda90 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/28849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-04soc/nvidia/tegra124: Increase bootblock sizePatrick Rudolph
Increase bootblock size by 4KiB and reduce romstage by 4 KiB. Change-Id: I604fd9c63a4cf6fb7b18249a6d73cd637e184a71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04mb/google/poppy/variant/nocturne: update GPIO configurationNick Vaccaro
GPP_C19 is not being set as the code is incorrectly setting GPP_C16 instead, causing SAR sensor not to work, so this change sets GPP_C19 to NF1. GPP_E3 is not being initialized in the code. Initialize GPP_E3 to a no connect as documented in the board schematic. BUG=b:117124878 TEST: 'emerge-coreboot chromeos-bootimage', flash nocturne and verify that i2c transactions work for the left SAR sensor. Change-Id: I9e972dbe4214cdd15d80d63dfa058e7755f7ecbb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28867 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variant/nocturne: increase touchscreen reset delayNick Vaccaro
Increase the reset delay for the touchscreen to 10 ms. BUG=b:116857433 TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot nocturne to kernel, log in and execute the following two commands: echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/unbind echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/bind and verify the bind command does not echo back a "-bash: echo: write error: No such device" error. Change-Id: I102b57ea5a10d22bee6d4f7c6f114b380a5d586b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28803 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04soc/intel/common: add acpi_get_sleep_type to pmclibBora Guvendik
Change-Id: I3f4123657a375211f802a7d484a15353f9a256e9 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2018-10-04amd/stoneyridge: Use BIOS_DEBUG to log PM1 and PMxC0 statusEdward Hill
Use BIOS_DEBUG consistently to log PM1 and PMxC0 status registers on boot. print_num_status_bits() was already using BIOS_DEBUG. TEST=Inspect console for Grunt BUG=b:110788201 Change-Id: If7da8c7c86e90a661338903ad05cc41e11f507d2 Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/28885 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04amd/stoneyridge: Prepare for vboot rebooting systemMarshall Dawson
Implement the function vboot_platform_prepare_reboot() which is normally a weak function. The SlpTyp field of the PM1 register is not reset to its default value when the APU restarts. This change prevents a failing condition if vboot decides to reset the system instead of allowing an S3 resume to continue. TEST=Resume Grunt when vboot attempts a reset, verify a fresh boot instead BUG=b:117089826 Change-Id: I6e0e3e541bad89ca5b23d6ddb6e5c0df7f762f10 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28877 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variants/rammus: Shorten oem_table_id to RAMMUSmarxwang
This patch modifies "oem_table_id" from "RAMMUSMAX" to "RAMMUS" so that the audio topology file can be loaded properly by the operating system. BUG=b:112945714 BRANCH=master TEST=There is no error message like "failed to load topology firmware" in kernel v4.4 log. Change-Id: I66a38ea38791dd3d9606a05b7b696236c350237f Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04src/soc/intel/cannonlake: Fix IA32_PLATFORM_DCA_CAP addressElyes HAOUAS
Change-Id: Id4f99e82bb97a260d654b49a2ba94fde207d318b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28847 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04Documentation/.../gerrit_guidelines: Remove trailing colon from headingsJonathan Neuschäfer
They are unnecessary in headings, and look slightly irritating in the table of contents. Change-Id: I7344026f5753aebdd73f9fe414e96730c823ac26 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-04sb/amd/pi/hudson: Remove #if 1Jonathan Neuschäfer
Change-Id: I4cf69dc3df2afaa8f33864374ea93548ab7ad810 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04Documentation: Spell "blob" in lowercaseJonathan Neuschäfer
It's not an acronym (outside of database software). Change-Id: I529561e4fc9889be7f9d6bd6d5f9a876e2007671 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04util/abuild/abuild.1: Fix references to CBROOT parameterJonathan Neuschäfer
One occurence of this parameter was changed from LBROOT to CBROOT in f8ee1806ac ("Rename almost all occurences of LinuxBIOS to coreboot."). Change the others, too. Change-Id: Ic0da24c32cd6d2f0577de037b5463c800f455786 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04MAINTAINERS: Update RISC-V entry with SiFive and utilsJonathan Neuschäfer
Change-Id: Idd9e51fe2cb7a8497381f5b7440666cd709166b8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04arch/riscv: Adjust compiler flags for scan-buildJonathan Neuschäfer
Clang doesn't understand -march=riscv64imac and -mcmodel=medany, so don't use them when running the clang static analyzer. On the other hand, __riscv and __riscv_xlen need to be defined in order to select some macros in src/arch/riscv/include/arch/encoding.h. __riscv_flen selects the floating-point paths in src/arch/riscv/misaligned.c. -mabi is moved with -march for consistency. A complete list of preprocessor definitions on RISC-V can be found at https://github.com/riscv/riscv-toolchain-conventions#cc-preprocessor-definitions With this commit, scan-build produces a useful result on RISC-V. Change-Id: Ia2eb8c3c2f7eb5ddd47db24b8e5fcd6eaf6c5589 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-04cpu/intel/car: Fix typoElyes HAOUAS
Change-Id: If71ab647f012a735c6aa6939463414407757ab9a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-10-04mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for FleexIvy Jian
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 2 for DVT. BUG=b:116721822 TEST=Verified it in Fleex EVT board which rework ram id. Change-Id: I0f191c950aa6a70069bffa1f1802386ab263a310 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-04mb/google/nocturne: Define GPP_D17 as EC_SYNC_IRQDuncan Laurie
Use GPIO GPP_D17 pin as the EC sync interrupt and provide this value to the embedded controller to be exported to the OS. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: Ie2b33692367b5d9ecc2b128180d8cfe4f6b347b1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04ec/google/chromeec: Define a sync IRQ if neededDuncan Laurie
Some boards are adding a second pin used for synchronization between the EC and AP. This is a direct connection between the EC and the SOC that is intended to provide a lower latency interrupt signal for sensors on the EC. Currently the runtime EC interrupts assert an SCI before eventually resulting in a Notify() on the MKBP device that the sensor driver users. These extra layers add processing time and require additional EC communication to determine the event source. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: I49a11363ce82882e572bcb8923fd114ab6593fea Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:08:56 +0000