| Age | Commit message (Collapse) | Author |
|---|
|
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init)
unintentionally changed the code to ignore the NVRAM setting
`tft_brightness`. Revert that hunk to restore the original behavior.
Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14002
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This adds most important MMIO reserved memory resources,
real DRAM memory resources, and some DRAM resources that
can not be used as RAM for whatever reason.
Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I8e57c23565f173afc0f4d450579b8bfb35aeb964
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13363
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
UART bar gets overwritten during resource allocation stage. As result
the serial driver ends up using stale BAR so serial output does not
work. This driver simply tells resource allocator not to change BAR
of UART device.
Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I6a632ca7d4a19c4973c41bb102f97e0836f27a5e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13996
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add configuration in accordance to "PCI Configuration Matrix".
Change-Id: If1f60486d802a6595aed03d95e0d20fc7db21bd2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13926
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13911
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is the minimal setup needed to get all CPU cores enabled. That
includes sending an IPI to APs and setting up MTRRs. Microcode updates
are not performed for two reasons:
* CSE (Converged Security Engine) upgrades the microcode before
releasing reset
* Microcode update files are not available at this point in time
Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13910
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On platforms that didn't use 32-bit addresses, enabling the
CONFIG_TRACE option (Trace function calls) would break the build due
to a cast from a pointer of a different size.
This fixes this warning:
src/lib/trace.c:29:58: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13962
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use UDELAY_IO selected by CPU_VIA_C7, so no manual inclusion
(or secondary UDELAY implementation) is needed
Change-Id: Ib086a1bfe8ffca5757bf553c5a62a45da7a410b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i440BX boards in the chipset.
Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13781
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a port of Auron_Paine based on upstream Auron and the Auron_Paine
code originally from commit bd61dfd in Google branch
firmware-paine-6301.58.B .
Change-Id: I3a1faec3195a81bb3a6496b8bd610fc8a89e66aa
Signed-off-by: Georg Wicherski <gwicherski@gmail.com>
Reviewed-on: https://review.coreboot.org/11907
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Pass memory training information to MemoryInit, so memory
training can be completed.
Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13870
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to
statically allocate the different memory regions it needs and guarantees
at build time that there are no dangerous overlaps between them. At the
end of its (ramstage) execution, however, it usually loads a payload
(and possibly other platform-specific components) that is not integrated
into the coreboot build system and therefore cannot provide the same
overlap guarantees through memlayout.ld. This creates a dangerous memory
hazard where a new component could be loaded over memory areas that are
still in use by the code-loading ramstage and lead to arbitrary memory
corruption bugs.
This patch fills this gap in our build-time correctness guarantees by
adding the necessary checks as a new intermediate Makefile target on
route to assembling the final image. It will parse the memory footprint
information of the payload (and other platform-specific post-ramstage
components) from CBFS and compare it to a list of memory areas known to
be still in use during late ramstage, generating a build failure in case
of a possible hazard.
BUG=chrome-os-partner:48008
TEST=Built Oak while moving critical regions in the way of BL31 or the
payload, observing the desired build-time errors. Built Nyan, Jerry and
Falco without issues for good measure.
Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a step towards isolating the timer drivers.
Change-Id: I4c9349054be0cf520cd4407be9fb393b664223a4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13922
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To keep the list of 'secondary' payloads from cluttering the payloads
menu, move them into their own menu under the payloads menu. Then they
don't need any dependencies other than the architecture.
Change-Id: I95119750c6ef627ef0de9b5f5cbad085a51ac2bb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13941
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Move payload clean targets into payloads/Makefile.inc
Add clean targets for coreinfo, nvramcui, Memtest86+
Change-Id: I70c13582311dfba3e309805053159f8a039cb109
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13940
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There's no need to use a struct resource type for
fsp_find_reserved_memory(). struct resource is mainly associated
with a device and that memory is added to cbmem after memory init.
Other uses ins FSP 2.0 just use struct range_entry. Use that
instead for consistency.
Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13960
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The FSP 2.0 implementation doesn't handle FSP modules for
SoCs that are required to be XIP. There is no notion of
"loading" in that situation where one should be copying
anything anywhere.
Additionally, the loading code does not handle overlaps within
the current running program which is doing the loading.
Change-Id: Ide145581f1dd84efb73a28ae51b3313183fa127a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13959
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
rdev_mmap() was not followed by rdev_munmap(), thus leaking
resources. Fix the leak.
Change-Id: Ibdd30d6b64616038013b4bb748f2ad4a98db5472
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13958
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The memory provided to MemoryInit() for its own usage is at the
top of the CAR region.
Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13957
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
In order to enforce the semantics of struct range_entry provide
an init function, range_entry_init(), which performs the field
initialization to adhere to the internal struture's assumptions.
Change-Id: I24b9296e5bcf4775974c9a8d6326717608190215
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13956
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
SeaBIOS 1.9.1 was released on February 15th, 2016 [1][2] with the changes
below.
```
$ git log --oneline --reverse rel-1.9.0..rel-1.9.1
3403ac4 build: fix typo in buildversion.py
fe4154e xhci: Check for device disconnects during USB2 reset polling
c016236 xhci: Wait for port enable even for USB3 devices
0240428 sdcard: Only enable error_irq_enable for bits defined in SDHCI v1 spec
fe8d986 sdcard: fix typo causing 32bit write to 16bit block_size field
e902d3f nmi: Don't try to switch onto extra stack in NMI handler
dc6498e scsi: Do not call printf() from scsi_is_ready()
6027043 coreboot: Check for unaligned cbfs header
73f00bc fw/pci: do not automatically allocate IO region for PCIe bridges
b3ef39f biostables: Support SMBIOS 2.6+ UUID format
```
[1] http://www.seabios.org/Releases#SeaBIOS_1.9.1
[2] http://seabios.org/pipermail/seabios/2016-February/010493.html
Change-Id: I4bc8224c2a80cbcce54621e941a9c3a92ca04215
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13933
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
For all the chipsets which were performing the following sequence:
x86_setup_fixed_mtrrs();
x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2);
Replace that with x86_setup_mtrrs_with_detect() since it is equivalent.
Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13936
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Nyan is an old board that was committed before several core code
modernizations to timestamp and CBFS code. Not all of those later
patches were correctly integrated with old boards like this, and the
core code has evolved to a point where it doesn't actually boot anymore.
This patch fixes that issue and brings the Nyan boards more in line with
how later ARM platforms look.
BRANCH=None
BUG=None
TEST=My Blaze boots again.
Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717
Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328543
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13832
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Include the code to add the WRDD method to the existing
WiFi Device in the mainboard ACPI code.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Compile for the other platforms that are modified.
Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516
Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329296
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13840
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a country identifier field to NVS and populate it with the
call to wifi_regulatory_domain() which will (by default) do a
lookup for the 'region' identifier in VPD on a Chrome OS device.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2
Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13839
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add an ACPI file containing a generic WRDD method that is used
by Intel wireless kernel drivers to determine the country code
to be used for regulatory domain configuration of the wireless
radios.
This requires an NVS variable called 'CID1' to provide an
ISO-3166-2 alpha-2 country code or it will just return 0 instead.
This is implemented as a bare method because this needs to be
included directly into the wifi device that is defined by the
mainboard as it may have board-specific settings like _PRW that
need to be provided as well.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=boot on chell with 'region'='us' in VPD and see that it is
properly read out by calling WRDD method on the WiFi device.
Change-Id: I27a5e27f65d05ff62a0e79a87a32c1ef0c5d0ef3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 2da0cf76ca3cc5e3dfbc4a0859733523de780cf5
Original-Change-Id: I9d83c3938cceafc77ef8747a5c47f586ee84437e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329294
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13838
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In ChromeOS VPD spec the right name is "region".
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/322851
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: mukesh agrawal <quiche@chromium.org>
(cherry picked from commit 21ea0663e7f3ffe3aaea6b6ce0e1216fcd9ca23e)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4ba9a9c65af3732fa263030640495ab5bea91d1f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 848f18e731eb11dd3037d12607d7364f95e64e34
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: Ib96036f9cd76449f170af5c3dd6ef6e8e91ded94
Original-Reviewed-on: https://chromium-review.googlesource.com/329293
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Platforms that need to initialize WRDD package with the regulatory domain
information should implement function wifi_regulatory_domain.
A weak implementation is provided here.
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/314384
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Tested-by: Hannah Williams <hannah.williams@intel.com>
(cherry picked from commit c25d7221679d1fab830d614eeabfa3436bce6ac1)
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: I1cbdf4e940b009c74ee8ed8f4fca85f4f5c943b2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 27bba336e620a2d3d331e350d4f46164e337fabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: I84e2acd748856437b40bbf997bf23f158c711712
Original-Reviewed-on: https://chromium-review.googlesource.com/329291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Set the UPD values for MemoryInit.
* Update the FspUpdVpd.h file which specifies the parameters for
MemoryInit.
* Add the necessary values to chip.h to enable values to come from
the mainboard's devicetree.cb file
* Add the parameters to the mainboard's devicetree.cb file
* Locate the platform configuration database file (pdat.bin)
* Copy the data values from the chip_info structure into the UPDs
* Display the UPD values
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful when the UPD data is displayed before the call to
MemoryInit
Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13896
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Jerry
Change-Id: Ic227287784bd0c76a0c4c20a40c581d37420b98c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1b4e818e91998135288978c6cb68a63288bb20e5
Original-Change-Id: I28f5decabcbaf1e61c9b4e549b11e568dace8c09
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/312902
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12926
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
'archive' concatenates files into a single binary blob. Files are
indexed by the base names. See archive.h for the format description.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: Iea108160e65c8c7bd34c02af824a77cb075ee64b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21a9ba860f29599ac029f8d49d32399c4e3a73a8
Original-Change-Id: I46b4efb339e3a1e05772ae752f2861026ca09cfc
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/12925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
On Apollolake CPU memory mapping is similar to previous SoC, and
we place CBMEM right under TSEG.
Change-Id: I606f690449ba98af6e9fc3074d677c7287892164
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
UDELAY_IO is defined in src/cpu/x86/Kconfig, so it does
not need to be redefined in the AMD cpu or board Kconfigs.
Change-Id: I6676881c0ba5d1634230fc3d3c37da3afbc6fceb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13780
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The current MTRR API doesn't allow one to detect variable MTRRs
along with handling fixed MTRRs in one function call. Therefore,
add x86_setup_mtrrs_with_detect() to perform the same actions
as x86_setup_mtrrs() but always do the dynamic detection.
Change-Id: I443909691afa28ce11882e2beab12e836e5bcb3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13935
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Add the routines to handle the UPDs for SiliconInit. Currently no
support is required.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful if coreboot calls SiliconInit
Change-Id: I5176ab4b1ea7681c3095f102a86f4b614366c0fc
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Build make with the rest of the toolchain, since the targets using
a Chromium EC need make 4.x
Change-Id: I7efb0c25f605f16c2d9a1e7c4b203f3bcdae671b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13923
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I25ea327ed151e18ccb5d13626d44925d2a253d08
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/10012
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I5d50fecca51e89aed597e1cfafbcd4515d4d4388
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13806
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This romstage is minimalistic. Its goal is to set up some BARs
that FSP expects to be set and then invoke FSP driver to train
memory.
Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13805
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On Apollo Lake SPI flash is memory mapped. The mapping is different
to previous platforms. Only "BIOS" region is mapped in contrast to
whole flash. Also, the 128 KiB right below 4 GiB are being decoded by
readonly SRAM. Fail accesses to those regions, rather than returning
false data.
Change-Id: Iac3fa74cd221a5a46ceb34c2a79470290bcc2d84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13706
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds a few helper functions that are intended to assist setting
up framebuffer.
Change-Id: Id8ed4de1f9de32e9222b0120c15a6d33676346e7
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13802
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP creates hand-off-blocks (HOBs) to exchange information with
coreboot. This adds a set of utilities to parse HOBs and extract
some useful information from them.
Change-Id: If55dbfaa021cd68c312813a5532a36c68806dbbc
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13801
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds Notify Phase API. This is an important call that is used
to inform FSP runtimes of different stages of SoC initializations
by the coreboot.
Change-Id: Icec770d0c1c4d239adb2ef342bf6cc9c35666e4d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13800
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds SiliconInit API that is needed to be called after memory
has been trained. This call is needed to let the blob do various
initialisations of IP blocks.
Change-Id: I35e02f22174c8392e55ac869265a19c4309932e5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13799
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds implementation of fsp_memory_init() that is used to train
memory.
Change-Id: I72268aaa91eea7e4d4f072d70a47871d74c2b979
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13798
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Also re-organize some of the superio code in order
to succesfully compile the rom.
Change-Id: I85a6f1352ae3b91c3c98e4d3fa0b90b87e02babc
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13925
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic0ae87ca1fff6d912702190d3fe8ab21285c8630
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13920
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs.
The 10K and 40K values map to 'reserved'.
This brings the code closer to the non-FSP baytrail.
Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Split out the MTRR support into a new module: mtrr.c.
TEST=Build and run on Galileo
Change-Id: Ib9ec479d171dbbc062509e14fbe246f6d90e903a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13895
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Turn on the SD controller to allow it to claim resources.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_PAYLOAD_ELF=y
* CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"
* Testing successful when at the UEFI shell prompt:
* After issuing:
* "connect -r"
* "map -r"
* The "dir" command displays the contents of the SD flash card
* The "drivers" command shows an SD host and SD media connection
Change-Id: I883dc87270045786ddb931bea83fc36646a128e6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13894
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a link to the "Driver Writer's Guide" and a link to the "EDK II
firmware for Intel Quark SoC X1000" document.
TEST=None
Change-Id: I8d629d06accfe24a0b8971b5b5868849587c3db7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13893
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Add a link to "Making a bootable SD card"
TEST=None
Change-Id: I5682fdd51a4ba37f97ad35475e11d9843f1498fb
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13892
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This allows memtest86+ to be added to CBFS as a 'secondary'
payload on x86 systems, to be loaded by the main payload
if desired.
Selecting this option, which defaults to no, builds the memtest86+
payload and adds it to CBFS as `img/memtest` which can then be
loaded by for example SeaBIOS or GRUB.
Change-Id: Iecf876aaf588ba1df7abdf6668cb26f089bf5f42
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13858
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
|
|
If the TPM code isn't getting built in, the Kconfig symbol
CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating
an invalid operating region in the ACPI tables, causing a bluescreen
in windows.
This should fix this issue:
https://ticket.coreboot.org/issues/35
"commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module)
breaks Windows"
Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a few assembly lines that are generic enough to be shared
between romstage and verstage that are ran in CAR. The GDT reload
is bypassed and the stack is reloaded with the CAR stack defined
in car.ld. The entry point for all those stages is car_stage_entry().
Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13861
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Attempt to better document the symbol usage in car.ld for
cache-as-ram usage. Additionally, add _car_region_[start|end]
that completely covers the entire cache-as-ram region. The
_car_data_[start|end] symbols were renamed to
_car_relocatable_data_[start|end] in the hopes of making it
clearer that objects within there move. Lastly, all these
symbols were added to arch/symbols.h.
Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13804
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Because the perl error messages go to stderr, we were not catching these
on the build server. If the script has an issue, we want to know
immediately, so change the bash script that calls into the perl lint
tool to pipe these to stdout.
Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove dependency on early_serial.c and instead use the
Super I/O's header to access the functions needed.
Change-Id: I9edf7fc2501aa832106dda9213e702dbcc1200b4
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13887
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
The PLL multiplier value is off by one for DDR3-1866 due to a
wrong TCK value, resulting in DDR3-1600 being used by the PLL.
Needs test on real hardware !
Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
It's mobo architecture, not a user-adjustable setting.
Change-Id: I8bb81638f391cf0ba880801e4707d8f0957897c8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13906
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
__asm__ is more robust to compilation flags.
Change-Id: Ic7ca6e38ddd439dcfc4a62ef272ecea62416b4be
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13905
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Those options have no effect or lead to compile error on ARM due
to fundamental incompatibilities. Add proper "depends on" clauses
to hide them.
Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13904
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Test that the coreboot toolchain version of IASL is being used by
looking for the string 'coreboot toolchain' instead of a specific
version number. While this may cause people to have to rebuild
their toolchains again now, it helps to prevent toolchain failures
when bisecting in the future.
Change-Id: I9913eeae8f29ddc3ec8c70077c05d898595eb283
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12847
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The what-jenkins-does build runs distclean when building the utilities.
It doesn't fail the build if distclean fails, but it generates a
scary warning.
Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of keeping track of all the combinations of entry points
depending on the stage and other options just use _start. That way,
there's no need to update the arch/header.ld for complicated cases
as _start is always the entry point for a stage.
Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13882
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
In order to align the entry points for the various stages
on x86 to _start one needs to rename the reset_vector symbol.
The section is the same; it's just a symbol change.
Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13881
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Until recently x86 romstage used to be linked at some default
address. The address itself is not meaningful because the code
was normally relocated at address calculated during insertion
in CBFS. Since some newer SoC run romstage at CAR it became
useful to link romstage code at some address in CAR and avoid
relocation during build/run time altogether.
Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to avoid collisions with other _start symbols while
grepping and future ones be explicit about which _start this
one is: the 16-bit one only used by the reset vector in the
bootblock.
Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13880
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
It's helpful to see the reset vector in objdump output. Without
it being marked executable it doesn't get displayed.
Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13879
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Patrick at least indicated this jump after the reset
vector jump was a remnant from some construct used long
ago in the project. It's not longer used (nor could I find
where it was). Therefore, remove it.
Change-Id: I31512c66a9144267739b08d5f9659c4fcde1b794
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13878
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This adds a set of utility functions that help load and identify
FSP blobs.
Change-Id: I1d23f60fd1dc8de7966142bcd793289220a1fa5e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13797
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This adds important header files that specify calling interface between
coreboot and FSP.
Change-Id: I393601c91e3c3f630e0fc899f1140ecefed8ecba
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13796
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In Kconfig files, the 'if' and 'endif' statements need to match up. A
file can't start an if statement that's completed in the next file.
Add a check as the files are being parsed to make sure that they match
up correctly.
Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fill minimal info required for SMBIOS type 17.
Report
* DIMM size
* channel
* rank per DIMM
* speed in Mhz
* DIMM type
* slot
* manufacturer ID
* serial
Allows dmidecode to print the current RAM configuration.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
* Linux 4.3
* dmidecode 3.0
dmidecode output:
Handle 0x0005, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0000
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 8 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: Channel-0-DIMM-0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: Unknown (cd04)
Serial Number: None
Asset Tag: Not Specified
Part Number: F3-1866C9-8GSR
Rank: 2
Configured Clock Speed: 1600 MHz
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0006, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x0000
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 8 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: Channel-1-DIMM-1
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: Unknown (cd04)
Serial Number: None
Asset Tag: Not Specified
Part Number: F3-1866C9-8GSR
Rank: 2
Configured Clock Speed: 1600 MHz
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Change-Id: I4e5f772d68484b9cb178ca8a1d63ad99839f3993
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13852
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Parse manufacturer id and ASCII serial.
Required for SMBIOS type 17 field.
Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13862
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In e820entry struct, the members are defined using
standard types. This can lead to different structure size
when compiling on 32 bit vs. 64 bit environment. This in turn
will affect the size of the struct linux_params.
Using the fixed width types resolves this issue and ensures
that the size of the structures will have the same length
on both 32 and 64 bit systems.
Change-Id: I1869ff2090365731e79b34950446f1791a083d0f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
When linux is used as payload, the parameters to the kernel are build
when cbfstool includes bzImage into the image. Since not all
parameters are used, the unused will stay uninitialized.
There is a chance, that the uninitialized parameters contain
random values. That in turn can lead to early kernel panic.
To avoid it, initialize all parameters with 0 at the beginning.
The ones that are used will be set up as needed and the rest
will contain 0 for sure. This way, kernel can deal with the
provided parameter list the right way.
Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13874
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Instead of hardcoding the maximum supported DDR frequency to
800Mhz (DDR3-1600), read the fuse bits that encode this information.
Test system:
* Intel IvyBridge
* Gigabyte GA-B75M-D3H
Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13487
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add more manufacturer IDs for vendor:
* GSkill
* OCZ
* Transcend
Change-Id: Ic7df76b1310b2c1abea9c5d2d8fd688cb2a713b8
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13863
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The code can't handle cyclic zero runs. Make sure it will never
wrap around by setting the top-most bit to constant one.
Fixes "Mini channel test failed (2)".
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
Change-Id: I55e610d984d564bd4675f9318dead6d6c1e288a3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/13853
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
coreboot's top level Makefile does the same, so let's stay consistent.
Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The current default of 6 lines leaves us with no context
about the actual error:
*** ERROR: 3 warnings encountered, and warnings are errors.
coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed
make[1]: *** [oldconfig] Error 1
make[1]: Leaving directory 'coreboot-gerrit'
Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Our GDB doesn't support RISC-V yet, so let's disable it for now
to keep the build from breaking.
Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
With this change you can say
$ make DEST=/opt/cross-1.35
to get all of the cross toolchain built and installed to /opt/cross-1.35
Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I31ed159b13c0da60383068832615c6e4a9608efe
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13849
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Intel Speed Shift Technology is a new mechanism that replaces
Legacy P-state. ISST allows OS hints about energy/performance
preference. H/W performs the actual P-state control (autonomous)
1. Optimization frequency seclection for low residency workloads,
no longer a static knee point.
2. Optimized frequency selection for best energy to performance
trade offs.
3. Kick down frequency (from idle) fpr best responsiveness while
taking energy consumption init account.
Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits
which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes
and enable HWP accordingly.
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu and verify HWP getting enabled/disabled
using Intel P-state driver.
Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f
Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313107
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: https://review.coreboot.org/13835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch provides config options to enable/disable Intel SST
(Speed Shift Technology).
BUG=chrome-os-partner:47517
BRANCH=None
TEST=Booted kunimitsu/lars, verified HWP driver load successfully.
CQ-DEPEND=CL:313107
Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d
Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/326650
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: https://review.coreboot.org/13843
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This dependency wasn't called out before, and when building with enough
threads, the build would fail due to a collision trying to build
build/util/kconfig/conf.
Fixes this failure:
make[1]: execvp: build/util/kconfig/conf: Permission denied
/home/martin/git/coreboot/util/kconfig/Makefile:40: recipe for target
'oldconfig' failed
make[1]: *** [oldconfig] Error 127
Makefile:167: recipe for target 'build/config.h' failed
Change-Id: Ib78d36bab0ba469796d89877bbe6a61e05196e87
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13859
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update the DPTF configuration for the chell mainboard:
1) Enable DPTF charger control, set max current to 1975mA
according to the battery specification.
2) Enable charger effect on charger temp sensor in TRT
3) Set PL2 to 15W which is the same value configured in the CPU.
BUG=chrome-os-partner:49859,chrome-os-partner:50306
BRANCH=glados
TEST=build and boot on chell
Change-Id: I644256b9596cc5295513c48f5e3a18e6ce8b0a6b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: c19740a227f932bf80e9243341ec81763779719c
Original-Change-Id: Icff5edc9d659bea6370ff8de1334ebf0983340da
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329187
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13842
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add new GPIOs for touchscreen enable and reset pins and define
the one missing unconnected pin for GPP_E10.
BUG=chrome-os-partner:50518
BRANCH=glados
TEST=build and boot on chell DVT1
Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d
Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329297
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13841
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is used in coreboot-side vboot code now, to keep booting from
the same RW section after wakeup - necessary when romstage is in RW
and its use of the RAM init configuration cache may differ between
versions.
Change-Id: Ie531cf3ddc980154f48772b3ff87e23473010721
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/13844
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
