summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-09docs/releases: Fix warning "document isn't included in any toctree"Felix Singer
While running Sphinx, it shows the warning "document isn't included in any toctree" for the documents checklist.md and templates.md. These are not meant to be listed in ToC trees. Thus, mark them as orphaned to exclude them from ToC trees. Change-Id: I1ff8f7c24ac9b3c3a120914c0c72ab73e85c4873 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62584 Reviewed-by: Thomas Heijligen <src@posteo.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09vc/google/chromeos/Kconfig: Fix typoAngel Pons
heirarchy ---> hierarchy Change-Id: I5cbd77a156852e6f8ad6eafc316ee33f153635b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-03-09soc/mediatek/mt8186: set pin drive strength to 8mA for NORRex-BC Chen
Set NOR pin drive to 8mA to comply with HW requirement. This implementation is according to chapter 5.1, 5.6 and 5.8 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=SPI SI tests for AP to NOR pass for both kingler and krabby. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5b6e37b0f7d4207ea35f11394d25ad1e096ac01a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-09soc/mediatek/mt8186: Add GPIO driving functionsGuodong Liu
Add GPIO driving functions to adjust pin driving. The value of drive strength is different for each SoC, so we define GPIO_DRV0 to GPIO_DRV7 which are corresponding to 2/4/6/8/10/12/14/16mA in MT8186. This implementation is according to chapter 5.1 in MT8186 Functional Specification. BUG=b:218775654, b:216462313, b:212375511 TEST=build pass Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: I6d987f28be98b515fa5c542222bda08bea1d5118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62471 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUsDavid Wu
Based on testing results from the thermal team, they have decided to update PL1, PL2 and PL4 for U28 SKUs. BUG=b:221338290 TEST=Run with U28 and ensure the PL1/PL2/PL4 settings are correct Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib82e2dbacd6cbc39390eb28f27ca9db48d6c215c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-03-09mb/google/brya/variants/felwinter: Fix stylus UI behavior bugJohn Su
Fix stylus UI behavior bug. 1) it appears the kernel's gpio_key driver is not expecting an IRQ descriptor for the `gpio` property, therefore change to an active-low input. 2) The wakeup event was configured backwards. Change list - Configure GPP_A7 as "ACPI_GPIO_INPUT_ACTIVE_LOW". - Change wakeup_event_action from ASSERTED to DEASSERTED. BUG=b:220992812 TEST=emerge-brya coreboot chromeos-bootimage and verify pass Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I6f5e2992584d759eb1a559684d1cda08c7cbe3f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/skyrim: Add FW_CONFIG DefinitionJon Murphy
BUG=b:214415048 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ia6bb3f717b3d30fe5f166dfc958024e931a070c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-09cpu/x86/smm,lib/cbmem_console: Enable CBMEMC when using DEBUG_SMIRaul E Rangel
This change will allow the SMI handler to write to the cbmem console buffer. Normally SMIs can only be debugged using some kind of serial port (UART). By storing the SMI logs into cbmem we can debug SMIs using `cbmem -1`. Now that these logs are available to the OS we could also verify there were no errors in the SMI handler. Since SMM can write to all of DRAM, we can't trust any pointers provided by cbmem after the OS has booted. For this reason we store the cbmem console pointer as part of the SMM runtime parameters. The cbmem console is implemented as a circular buffer so it will never write outside of this area. BUG=b:221231786 TEST=Boot non-serial FW with DEBUG_SMI and verified SMI messages are visible when running `cbmem -1`. Perform a suspend/resume cycle and verify new SMI events are written to the cbmem console log. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia1e310a12ca2f54210ccfaee58807cb808cfff79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-09mb/google/brya/var/redrix{4es}: Config VR_DOMAIN_GT's slew rate to 1/8Wisley Chen
Config VR_DOMAIN_GT's slew rate to 1/8 as well. BUG=b:204009588 TEST=build and verified by Power team. Change-Id: I766b828ad83710913323cf1485e09c1e0fd5e4c2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/bry/anahera{4es}: Disable TCSS port1Wisley Chen
Disable unused TCSS Port1. BUG=b:223082190 TEST=Build Change-Id: I63f4b7d89a1e37a00c58201ecc88bb336d0932c9 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/brya/var/anahera{4es}: Configure Acoustic noise mitigationWisley Chen
Enable Acoustic noise mitigation and set slew rate to 1/8 BUG=b:223082189 TEST=build and verified by power team Change-Id: I256cc57fb54e5d62e22470a01e7efef359d57083 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09mb/google/nissa: Add fmd file for nissaKrishna Prasad Bhat
Nissa boards are curretly using chromeos.fmd file of brya. The SPI flash layout for brya is of 32MB size, and nissa is expected to have 16MB SPI NOR flash. The current composition of AP firmware exceeds 16MB. To get an estimate of the unutilized region in the current flash layout for nissa, added RW_UNUSED regions. The idea is to reduce the AP firmware size to under 16MB and to remove the RW_UNUSED regions from the final fmd file. Below table gives the size reduction from brya fmd to nissa fmd: +----------------+-------------------+---------------+ | Region | Earlier size (KB) | New size (KB) | +================+===================+===============+ | SI_ME | 5116 | 3772 | +----------------+-------------------+---------------+ | RW_SECTION_A/B | 8192 | 4344 | +----------------+-------------------+---------------+ | VBLOCK_A/B | 64 | 8 | +----------------+-------------------+---------------+ | ME_RW_A/B* | 3008 | 1434 | +----------------+-------------------+---------------+ | RW_LEGACY | 2048 | 1024 | +----------------+-------------------+---------------+ | RW_ELOG | 16 | 4 | +----------------+-------------------+---------------+ | SHARED_DATA | 8 | 4 | +----------------+-------------------+---------------+ | VBLOCK_DEV | 8 | 0 | +----------------+-------------------+---------------+ | RW_SPD_CACHE | 4 | 0 | +----------------+-------------------+---------------+ | RW_NVRAM | 24 | 8 | +----------------+-------------------+---------------+ | WP_RO | 8192 | 4096 | +----------------+-------------------+---------------+ | GBB | 448 | 12 | +----------------+-------------------+---------------+ *Based on LZMA compression on ME_RW_A/B regions. With LZMA compression, this region can be 1434K. Without this, ~665K will be more in each of these regions. Patch: https://review.coreboot.org/c/coreboot/+/62358/ BUG=b:202783191 BRANCH=None TEST=Build and boot Nivviks. Cq-Depend: chrome-internal:4584911 Change-Id: I24b1c19cb71a54fc916a12668f72193f9689e755 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-09mb/google/nissa: Select SOC_INTEL_CSE_LITE_COMPRESS_ME_RW KconfigKrishna Prasad Bhat
Change-Id: Ib27149c527015bd54f839994e047f815e8922dc4 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/intel/common: Add Kconfig to enable compression on ME_RW blobsKrishna Prasad Bhat
Add SOC_INTEL_CSE_LITE_COMPRESS_ME_RW Kconfig to enable compression on ME_RW blobs. Select the Kconfig to add LZMA compressed ME_RW blobs to ME_RW_A/B regions. On ADL-N, this results in savings of ~665KB in each of ME_RW_A/B regions. FMAP REGION: ME_RW_A Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none FMAP REGION: ME_RW_B Name Offset Type Size Comp me_rw 0x0 raw 1275246 LZMA (1957888 decompressed) (empty) 0x1375c0 null 193056 none Change-Id: I2e31c358b4969b077d65ce6369a877914d573aed Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09cbfstool/linux_trampoline: Fill the ACPI RSDP entryArthur Heymans
With LinuxBoot Linux relied on the legacy method of fetching the RSDP pointer to get ACPI. This uses a more modern approach available since 2018 on the Linux kernel, which involves filling in the zero page. This method takes precedence over any other method of fetching the RSDP in Linux (UEFI, Kexec, Legacy/BIOS). Some UEFI zealots are threatening that legacy code will be removed from Linux so it's best to already adapt to that possibility. Tested on Qemu: - With qemu the RSDP is always in the EBDA, so checking if Linux uses the provided pointer is better done with a forced bad entry - With a fake bad pointer Linux correctly does not find RDSP Change-Id: I688b94608b03b0177c42d2834c7e3beb802ae686 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09coreboot_tables.c: Expose the ACPI RSDPArthur Heymans
The ACPI RSDP can only be found in: - legacy BIOS region - via UEFI service On some systems like ARM that legacy BIOS region is not an option, so to avoid needing UEFI it makes sense to expose the RSDP via a coreboot table entry. This also adds the respective unit test. Change-Id: I591312a2c48f0cbbb03b2787e4b365e9c932afff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62573 Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-09payloads/tianocore: Add prompt for Boot TimeoutSean Rhodes
Add prompt to Boot Timeout so that it can be easily configured from a config file. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I62b8f0a9b5bc0796506b991199a457d6b34ae494 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-03-09soc/apollolake: Hook up CnviMode to devicetreeSean Rhodes
Hook PCH_DEVFN_CNVI (0c.0) to CnviMode. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8b51e98952a39bd432e9bc63eea57a40dd6cf106 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09ec/starlabs: Correct Keyboard Backlight offsets for GLKSean Rhodes
Correct the offsets used for the keyboard backlight control: ECRAM_KBL_STATE 0x19 ECRAM_KBL_BRIGHTNESS 0x18 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I23bac43301635e6b18f1cbd28311e7210b049c70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09mb/starlabs/labtop: Remove duplicate value from KconfigSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0324747f936be27ee39e586124005530d5c424b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-09amdfwtool: Clear struct match before regular expression matchingZheng Bao
If it is not cleared and the number of strings is fewer than last iteration, the match[3] will keep the last value, which actually should be empty. Add assert to make sure the level is a legal value. BUG=b:222038278 Change-Id: If14e0923fbb1648d83784eb5dc1411c93227db5a Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-09mb/dell/optiplex_9010: Fix chassis typesMichał Żygowski
Discovered this chassis identification number on Dell Precision T1650 which is much OptiPlex 9010 alike. Precision T1650 is a Mid Tower (MT) chassis. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I2266fe39606b947a3d30a9462377fd56c39c2fa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-03-09mb/dell/optiplex_9010/mainboard.c: Add missing spaceMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3487b0ab94e565862ed727e9a91bd1efb364d43d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-03-09{drivers/security}: Replace `cb_err_t` with `enum cb_err`Subrata Banik
This patch replaces remaining `cb_err_t` with `enum cb_err` after commit hash 69cc557c (commonlib/bsd: Remove cb_err_t) removes majority of `cb_err_t` instances. TEST=Able to build the brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3392f9c2cfb4a889a999c8ea25066c89979f0900 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-09commonlib/bsd: Remove cb_err_tJulius Werner
cb_err_t was meant to be used in place of `enum cb_err` in all situations, but the choice to use a typedef here seems to be controversial. We should not be arbitrarily using two different identifiers for the same thing across the codebase, so since there are no use cases for serializing enum cb_err at the moment (which would be the primary reason to typedef a fixed-width integer instead), remove cb_err_t again for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iaec36210d129db26d51f0a105d3de070c03b686b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-09soc/mediatek: Add PCIe supportJianjun Wang
Add PCIe support for MediaTek platform. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) - linux/drivers/pci/controller/pcie-mediatek-gen3.c This code is based on MT8195 platform, but it should be common in each platform with the same PCIe IP in the future. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ib9b6adaafa20aeee136372ec9564273f86776da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-08util/spd_tools: Encode SDRAM min cycle time (TCKMinPs)Karthikeyan Ramasubramanian
ADL encodes CK cycle time as tCKMin whereas Sabrina encodes WCK cycle time. Encode tCKMin as per the respective advisories. BUG=None TEST=Generate the SPD and ensure that tCKMin is encoded accordingly. Minimum CAS Latency time is also impacted and is encoded accordingly. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I99ada7ead3a75befb0f934af871eecc060adcb26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-08.mailmap: Add a .mailmap file for gitMartin Roth
Git uses the .mailmap file to map author and committer names and email addresses to canonical real names and email addresses. Before adding this file, coreboot shows 1388 different author names and email addresses because of typos, people changing email addresses, and spelling their names differently. After adding the file, the number of authors is down to 1016. I tried to determine the best email address for each person by looking at what they'd used most recently, but I can't promise that I correctly picked the right address for everyone. Please take a look to make sure that your email address and name is correct. To enable .mailmap parsing globally, use: $ git config --global log.mailmap true To enable it just for a single log, run: $ git log --use-mailmap Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I1f9b9bccc9322799234475a1cebf9808edd25693 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2022-03-08soc/intel/tgl: chipset devicetree: correct TraceHub device aliasMichael Niewöhner
Device 1f.7 is TraceHub, not the PCH Thermal device, which doesn't exist anymore on TGL. Correct the device´s alias. Reference: Intel doc# 631119-007 Change-Id: I30a4ab1e801f6cdb0f2e03f105bf8cc09592eed8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-08soc/intel/tgl: drop orphaned VR domains enumMichael Niewöhner
Change-Id: I937bdf032e1ed86900334d41655f3e6272f66a6f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08ec/starlabs: Guard Max Charge in KconfigSean Rhodes
Guard Max Charge EC write in Kconfig so it's only used on platforms that support it. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I7be39cd9543c8253d53070950edc6908a21e864a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08timestamps: Rename timestamps to make names more consistentJakub Czapiga
This patch aims to make timestamps more consistent in naming, to follow one pattern. Until now there were many naming patterns: - TS_START_*/TS_END_* - TS_BEFORE_*/TS_AFTER_* - TS_*_START/TS_*_END This change also aims to indicate, that these timestamps can be used to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-08mb/starlabs/labtop: Add LabTop Mk IVSean Rhodes
Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/labtop-mk-iv-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Idbaa907dc38dc521961806132f21b7a90324ec9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-08MAINTAINERS: Update INTEL DENVERTON-NS SOC & HARCUVAR CRB MaintainersMariusz Szafranski
Split entry, remove Michal Motyl and add Jeff Daly. Change-Id: Ie572d95c9dd85f59bc3fe47bb61bc6b6866fe4c3 Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Suresh Bellampalli <suresh.bellampalli@intel.com> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08sb/intel/common/firmware: Hook up adding 10GbE LAN firmwareJeff Daly
Add ability to use ifdtool to add LAN firmware to image using Kconfig Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Change-Id: Id45ab4b69a85a5f8e52c0c4b130b6d729222b4c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08util/ifdtool: Add support for Denverton SoCJeff Daly
Denverton is a special version of IFD2 flash layout. It defines 10GbE firmware regions (11/12) and the IE (10) region which other IFD2 platforms do not have. Denverton does not include the legacy GbE region (3) or the EC region (8) which other IFD2 platforms do have. TEST='ifdtool -p dnv coreboot.rom' and verify correct output Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Change-Id: I15939ce4672123f39a807d63c13ba7df98c57523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08mb/google/brask/variants/moli: set up gpioRaihow Shi
Set the GPIO configuration of moli BUG=b:220821454 Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I7ec41cb843419c32337b66f3877eda5d730cea35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-03-08ec/starlabs/merlin: Disable ACPI support last when suspendingSean Rhodes
When entering suspend, ACPI support is disabled by setting OSFG to 0x00. This has been moved to be the final action, so it is after saving the current EC settings. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I5705efab42d2fe0fd5abc6c17eeea46ead27db17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08ec/starlabs/merlin: Use ECRD functionSean Rhodes
Use ECRD function, instead of getting raw values from emem, to avoid a lack of syncronisation as it uses a mutex. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I31113ef9af3a1e171e3e1f226e7adcfa0fbce61b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-08drivers/intel/i210: Set log level to BIOS_NOTICE on missing MAC addressWerner Zeh
Set the log level to BIOS_NOTICE for the case where the mainboard can not provide a MAC address since this can be a valid case. Showing this message with log level BIOS_ERR is not appropriate. In addition, rephrase the message to make clear that if the mainboard does not provide a MAC address the one stored in the MAC will be used. Change-Id: Ibfc58845f0ea47ced048b446e685c4860a29f075 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-03-08mb/google/brya/var/nivviks: Change bluetooth USB2 port from 8 to 10Reka Norman
When using CNVi WLAN on ADL-N, the internal USB2 port 10 is used for bluetooth. So update the nivviks overridetree to enable port 10 instead of port 8, which is the external port used for bluetooth with PCIe WLAN. BUG=b:222595137 TEST=Bluetooth works on nivviks Change-Id: Ica2067023125c04fc753eabc944ae29ff59dc864 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2022-03-08device/mmio.h: Move readXp/writeXp helpers to device/mmio.hJianjun Wang
These helpers are not architecture dependent and it might be used for different platform. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ic13a94d91affb7cf65a2f22f08ea39ed671bc8e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62561 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-08mb/google/brya/var/primus{4es}: add enable pin to rtd3-coldCasper Chang
Currently the BayHub eMMC controller is only going into its reset state when the RTD3 sequence is initiated. This causes it to still consume too much power in suspend states. This CL adds the power enable GPIO into the RTD3 sequence as well, which will turn off the eMMC controller (a true D3cold state) during the RTD3 sequence. BUG=b:222436260 TEST=USE="project_primus" emerge-brya coreboot chromeos-bootimage test suspend stress 100 cycles passed on primus. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I2fec6a30707fb1a258cdcc73b0ce38252b6f77c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v3091_00Ronak Kanabar
The headers added are generated as per FSP v3091_00 Previous FSP version was v2511_04 Changes include: - Update MemInfoHob.h BUG=b:222415800 BRANCH=None Change-Id: I260544e0502174ab141fa31ac78ede803b4f161e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-03-07mb/google/brya: Enable GPIO PM dynamically based on cr50 FW versionTim Wawrzynczak
cr50 firmware revisions starting at 0.5.5 and later are able to extend their IRQ pulses to be a minimum of 100us long. This change will enable cr50 long interrupt pulses when it detects the feature is supported by the detected firmware version. If the capability was detected, then GPIO PM will be enabled for the device, otherwise it will be disabled. BUG=b:202246591 TEST=boot brya0, check console logs for the correct message, and verify the GPIO PM registers. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iaf333dc0f177e17cd03b36ec7e487fc33bde2b93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61722 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-07drivers/tpm/cr50: Add I2C bus support to cr50 driverTim Wawrzynczak
This allows mainboards using an I2C bus to communicate with the cr50 to reuse the functionality related to firmware version and BOARD_CFG. BUG=b:202246591 TEST=boot on brya0, see cr50 FW version in logs Change-Id: Ide1a7299936193da3cd3d15fdfd1a80994d70da0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-07drivers/tpm/spi: Refactor out some cr50-specific logicTim Wawrzynczak
Mainboards accessing the cr50 over an I2C bus may want to reuse some of the same firmware version and BOARD_CFG logic, therefore refactor this logic out into a bus-agnostic file, drivers/tpm/cr50.c. This file uses the new tis_vendor_read/write() functions in order to access the cr50 regardless of the bus which is physically used. In order to leave SPI devices intact, the tis_vendor_* functions are added to the SPI driver. BUG=b:202246591 TEST=boot to OS on google/dratini, see the same FW version and board_cfg console prints as before the change. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie68618cbe026a2b9221f93d0fe41d0b2054e8091 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-07mb/google/brya/var/taniks: Add GL9750 SD card reader supportJoey Peng
Add GL9750 SD card reader support. BUG=b:222402409 TEST=Build FW and check device function normally. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ied36719914de214ae7d810f3d03a508e95fbf66a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/brya/var/redrix{4es}: Disable TCSS PCIe port1Wisley Chen
Disable unused TCSS PCIe port1 BUG=b:217238553 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I2bdfdb23d010a1e24c986ab52b5cef6eedcb674e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07soc/intel/tigerlake: Hide PMC and IOM devicesMichał Kopeć
Windows complains on missing drivers for these ACPI devices. Hide them from OS as it doesn't influence the hardware operation. Linux can still probe the drivers correctly. TEST=Boot Windows 11 and see there are no devices with missing drivers. Boot Ubuntu 20.04 and check that drivers corresponding to ACPI HIDs are still probed. Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I6c30c08ab730749bddef7ea67c7470c1554bd572 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/brya/vell: Enable USB2 port for KBD MCUDaisuke Nojiri
Vell has a keyboard MCU connected to USB2 port 7. This patch enables the port. localhost# usb_updater2 -f Found device. found interface 0 endpoint 1, chunk_len 64 READY ------- start target running protocol version 6 (type 1) maximum PDU size: 4096 Flash protection status: 0000 version: prism_v2.0.12137+c4ae1432f5 key_version: 1 min_rollback: 0 offset: writable at 0xc000 Current versions: Writable prism_v2.0.12137+c4ae1432f5 BUG=b:203664745,b:211496726 TEST=Run 'usb_updater2 -f' on Vell. Change-Id: Iad2140dbdf5e34332388f3f43b3ede3d22e73087 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/brya/var/{brya*,redrix*}: Add DmaProperty for WWANTim Wawrzynczak
ChromeOS considers the WWAN devices to be untrusted, therefore enable the new DmaProperty in the WWAN's _DSD to indicate to the OS that these devices should have IOMMU restrictions applied to them. BUG=b:215424986 BRANCH=brya TEST=dump SSDT Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9c9e73b7ea0575ab87cc980fb4786338047155de Reviewed-on: https://review.coreboot.org/c/coreboot/+/62437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-03-07drivers/wwan/fm: Include option to add ACPI _DSD for DmaPropertyTim Wawrzynczak
Similar to commit 09c047c, the WWAN device might be considered an untrusted device by some platforms, therefore add an option to add the same `DmaProperty` to the WWAN _DSD. BUG=b:215424986 BRANCH=brya TEST=dump SSDT, see new property Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If485ac5314fae6e6faefac43fcfcea4f4cdd02c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-03-07mb/google/hatch/var/jinlon: Fix EPS detection and disablementMatt DeVillier
Commit ebf14826 [mb/google/hatch/var/jinlon: Switch to using device pointers] broke jinlon boards without an electronic privacy screen (EPS) by disabling the parent device (iGPU) instead of the EPS when determined to be not present via SKU ID. Commit c5a3a4a6 [mb/google/hatch (baseboard): add ACPI backlight support] broke EPS detection by adding a duplicate iGPU device to the devicetree, resulting in the EPS entry being skipped. Fix both of these issues by assigning the device alias to the EPS child device, not the parent (iGPU). Rename the alias for clarity, and combine the duplicate device definitions for the iGPU. Test: build/boot google/jinlon SKU w/o EPS, observe GPU functional in both firmware boot screens and Linux OS. Change-Id: I0615ce361497abe6872085b0dec83292607e53dd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62593 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-07mb/google/glados: Restore ChromeEC tablet mode switch for caroline, caveMatt DeVillier
Commit 017b5c453a72f57ec785da1764939e24651ac5eb [ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT config] broke tablet mode on google/caroline and cave in mainline Linux kernels by changing the inclusion of the ChromeEC tablet mode ACPI handler. Fix this by addding it back (using the updated name guarding the inclusion of the tmbc ACPI). Test: build/boot google/cave under Linux 5.16, observe tablet mode handled correctly. Change-Id: Ie0ae5b6a61f104b5e973383344d289cc2e2a7b8d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-07soc/intel/alderlake: Use Kconfigs for Descriptor RegionSridhar Siricilla
The patch uses Kconfigs for Descriptor Region and Descriptor Region size instead of locally defined macros TEST=Build and boot Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I3f9461c8604383f995a4438f45286b14fb94deaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/62264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2022-03-07soc/intel/alderlake: Define Kconfigs for Descriptor RegionSridhar Siricilla
The patch defines Kconfigs for FMAP Descriptor Region and Descriptor Region size. The Kconfigs will be used by follow-up patches. TEST=Build Brya code Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia3481acefbda885617607675aef2afbb81c21c77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/brya/var/redrix{4es}: Re-enable USB2 port for BluetoothWisley Chen
BT didn't work due to commit 03c0853f4d58c73. Commit 03c0853f4d58c73 accidentally set the Bluetooth USB2 port to "empty", therefore re-enable USB2 port 9. BUG=b:217238553, b:222238381 TEST=build and verfied BT work/suspend successfully Change-Id: Ie94ef847fc130019f1e06983fc5039f1f564cd3a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/brya: Move ACPI MPTS method from DSDT to SSDT for Brya and RedrixCliff Huang
This change is to move MPTS (Mainboard Prepare To Sleep) method from wwan_power.asl to SSDT. MPTS is mainboard-specific method, while wwan_power.asl is meant for WWAN from its name. Having fixed MPTS method (i.e. DSDT) can not cover the case where device only presents and certain CBI bit(s) is(are) set. In Redrix and Brya, there are SKUs with or without 5G, 4G device. For those with 4G, MPTS method should be different. For those with no WWAN device, no MPTS is needed. Having MPTS generating in SSDT also eliminates the need for introducing Kconfig flags to support different devices in the future. MPTS method is created inside mainboard_fill_ssdt function in which the corresponding variant function is called. This will generate the following for the mainboard: Scope (\_SB) { Method (MPTS, 1, Serialized) { Local0 = \_SB.PCI0.RP01.RTD3._STA () If ((Local0 == One)) { \_SB.PCI0.RP01.PXSX.DPTS (Arg0) } } } Test: Check the SSDT for MPTS method under \_SB after boot to OS Use shutdown command and check the GPIO pins from logical analyzer Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I0f0b7638e90a7862173fca99305398bb250373e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-07mb/google/hatch/scout: Add i2c HID driverRehan Ghori
Add HID driver for i2c-1 for Ilitek touchscreen. BRANCH=None BUG=b:187289163 TEST=Build and flash coreboot; confirm an entry for hidraw for I2C-1 for Ilitek touchscreen. Change-Id: I9e42c36a35654cf3e2b41f78b209f4b89e8b05bd Signed-off-by: Rehan Ghori <rehang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-03-04libpayload: cbmem_console: Drop loglevel markers from snapshotJulius Werner
coreboot recently introduced non-printable loglevel markers in the CBMEM console. Payloads were generally unaffected since they don't use log levels and it is still legal to append lines without a marker to the log. However, payloads using cbmem_console_snapshot() to display existing logs from coreboot have started seeing '?' characters in place of the markers. This patch fixes the issue by filtering out marker characters. BUG=b:221909874 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4a9e5d464508320cf43ea572d62896d38c2a128d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-04Revert "mb/google/brya/var/taeko: Fix PLD group order (W/A)"Kevin Chang
This revert commit acb17fec34a609c5b674ad0d2af04d47800530e2. This issue was fixed in the OS, therefore the workaround can be reverted. BUG=b:210497855 BRANCH=firmware-brya-14505.B TEST=build coreboot and boot into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ic836e0cf53c2f9d30bd12851be285d864b2256b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-04soc/mediatek/mt8195: Update header version from 1.8.1 to 1.9.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Id82cbef9cb10dba71489ea96f67c329de9aadc49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-04soc/mediatek/mt8192: Update header version from 1.7.1 to 1.8.1Ryan Chuang
Move some structures to common folder (CB:61293), so we need to update header version for this. BUG=none TEST=dram calibration pass Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I8cf12f4967af116eaef88c1f688567f1da9fa6e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-03mb/google/zork: fix SMMSTORE size, alignment in default FMAPMatt DeVillier
SMMSTORE needs to have 64k size (minimum) and have 64k alignment as enforced by asserts added in commit 1ba6049 [drivers/smmstore/store.c: Add static assertion based on fmap]. Adjust size and alignment of SMMSTORE region in FMAP to ensure those conditions are met. Test: build google/morphius without asserts being tripped for above conditions. Change-Id: Ied04e93379e1507f5e6b2a1b71e4098a4561e5d8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03mb/google/brya/var/nivviks: Configure WCAM DMIC data pinReka Norman
GPP_S6 was accidentally configured twice instead of configuring GPP_S7. So configure GPP_S7 according to the schematics. BUG=b:222218450 TEST=WCAM DMIC works on nivviks Change-Id: I5de36aaa504a8856803c783564162c36416b50b7 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62511 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-03mb/google/glados: Drop TPM PIRQMatt DeVillier
The Infineon TPM 1.2 used on glados boards doesn't use a PIRQ; Linux only works with 'tpm.tis_interrupts=0" and Windows fails to init the TPM citing a lack of available resources. With the PIRQ removed, both Linux and Windows are happy / the TPM is available for use. Test: build/boot Linux 5.16.x and Windows 11 on google/chell Change-Id: I544695505291bbebe062df636cc8ddd139c08c2b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-03mb/google/brya: Change "mainboard: EC init" loglevel prefixIan Feng
Change loglevel prefix "BIOS_ERR" to "BIOS_DEBUG". BUG=b:220639445 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: Ie3de63fc13e7a5ed6a4b4617542851782fbb6f00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62508 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-03soc/amd/*/northbridge,root_complex: add comment about PCI BARsFelix Held
Add a comment to point out that the read_resources functions aren't missing a pci_dev_read_resources call that would add the resources for the BARs of the PC device. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie480832e0d7954135d2171dda986e477ef7b6c09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/*/northbridge,root_complex: simplify GNB IOAPIC resource indexFelix Held
In the northbridge's and root complex' read_resources function, the GNB IOAPIC resource used MMIO base address of the GNB IOAPIC as index which might be misleading. Instead use idx++ as a unique index for this resource. TEST=Resource allocator doesn't complain and no related warnings or errors in dmesg. The update_constraints console output changes like expected: Before: PCI: 00:00.0 fec01000 base fec01000 limit fec01fff mem (fixed) After: PCI: 00:00.0 0d base fec01000 limit fec01fff mem (fixed) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8061364879d772469882fc060f92676de6f600a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/*/northbridge,root_complex: simplify mmconf_resource indexFelix Held
In the northbridge's and root complex' read_resources function, the mmconf resource used the number of the MMIO_CONF_BASE MSR as index which might be misleading. Instead use idx++ as a unique index for this resource. TEST=Resource allocator doesn't complain and no related warnings or errors in dmesg. The update_constraints console output changes like expected: Before: PCI: 00:00.0 c0010058 base f8000000 limit fbffffff mem (fixed) After: PCI: 00:00.0 06 base f8000000 limit fbffffff mem (fixed) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id66c6153fad86bed36db7bd2455075f4a0850750 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03libpayload/bin/lpgcc: Make lpgcc provide TPM configuration for vbootJakub Czapiga
TPM1_MODE and TPM2_MODE defines have to be added to vboot and payload cflags to make them build correctly without requiring payloads to provide defines. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I567a9f04d7089699840dc7e0a063cf3030fb934b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-03drivers/{pcie,wifi}/generic: Update untrusted property nameTim Wawrzynczak
In order to align with established standards for establishing DMA boundaries[1] from ACPI, the UntrustedDevice property has been renamed to DmaProperty, which follows Microsoft's implementation. After discussions with Microsoft, they have agreed to make the `UID` property optional, so it is left out here, and instead it can be applied to: 1) Internal PCI devices 2) PCIe root ports 3) Downstream PCI(e) devices [1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports BUG=b:215424986 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Id70e916532e3d3d70305fc61473da28c702fc397 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-03-03soc/amd/stoneyridge/acpi: rename cpu.asl to pnot.aslFelix Held
After the patch that moved the generation of the PPKG object to Stoneyridge's acpi.c, only the PNOT object remained in its cpu.asl, so rename it to pnot.asl. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0deb2d75cae98b8fcd31297d7fac5f27525efe65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/stoneyridge/acpi: generate PPKG object in generate_cpu_entriesFelix Held
Generate the PPKG object in the generate_cpu_entries function instead of generating the PCNT object that is the used in the PPKG method in cpu.asl to provide the PPKG object. This both simplifies the code and aligns Stoneyridge with the other AMD SoCs. This will also make the code behave correctly in a case where the number of CPU cores/threads isn't a power of two. TEST=None, but equivalent change on Picasso was verified to not break anything on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib42d718102151a72a5fe812e83eb2eb4f9e7b611 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/picasso/acpi: rename cpu.asl to pnot.aslFelix Held
After the patch that moved the generation of the PPKG object to Picasso's acpi.c, only the PNOT object remained in its cpu.asl, so rename it to pnot.asl. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic77dacb146aa823fc99f779f465fff28b2aead68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/picasso/acpi: generate PPKG object in generate_cpu_entries callFelix Held
Generate the PPKG object in the generate_cpu_entries function instead of generating the PCNT object that is the used in the PPKG method in cpu.asl to provide the PPKG object. This both simplifies the code and aligns Picasso with Cezanne and Sabrina. This will also make the code behave correctly in a case where the number of CPU cores/threads isn't a power of two. TEST=Mandolin still boots successfully to Linux desktop and dmesg doesn't show any any possibly related problems. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifb84435345c6d8c5d11a8b42e5538cfb86432780 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03ec/starlabs/merlin: Don't report a battery capacity higher than design capacitySean Rhodes
If B1FC (Battery Full Capacity) is higher than B1DC (Battery Design Capacity), only report the design capacity. This handles cases where the battery calibration is incorrect, and the battery runs out before the OS thinks it's empty. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib3e4769c809b69e0a237b5f043e6c41c12d53752 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-03mb/google/brya/var/vell: Change to ELAN touchpanel driverShon Wang
Disabled G2touch driver and add ELAN touchpanel driver for vell. Due to incorrect BIOS setting, touch screen IC FW can't update and work. According to ELAN's recommendations, we coreect the ELAN2513 driver's setting and change I2C address to 0x10 BUG=b:221340736 TEST=emerge-brya coreboot and can flash touch screen FW Change-Id: I22f04fa21b542e21e88c46547779cfb55beb5c12 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com>
2022-03-02soc/amd/common/vboot: Verify location of CBMEMC transfer bufferRaul E Rangel
Since we want to read the non-x86 CBMEMC from SMM we need to be stricter on where we read from. This change forces the verstage binary and x86 code to agree on the CBMEMC transfer buffer location and size. BUG=b:221231786 TEST=Boot guybrush and verify verstage transfer buffer still ends up in cbmem Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ida7d50bef46f280be0db1e1f185b46abb0ae5c8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-02mb/google/brya/var/kinox: update gpio settingsDtrain Hsu
Configure GPIOs according to schematics BUG=b:218786363 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I939bc5f8963e9cba762adeb4828729fd14e29520 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-02soc/amd/common/vboot: Remove parameter to replay_transfer_buffer_cbmemcRaul E Rangel
We don't need to force the caller to look up and cast the transfer region. We can do it in the function. BUG=b:221231786 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib46a673ef5a43deb56a6d522152085036a47ab66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-02soc/amd/common/vboot: Split transfer buffer methods into separate fileRaul E Rangel
I want to reuse the transfer buffer methods in SMM, so I need to add them into their own file. I renamed `setup_cbmem_console` to `replay_transfer_buffer_cbmemc` so it has a more descriptive name. I also fixed the comment on `verify_psp_transfer_buf`. BUG=b:221231786 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4f3a8b414b91f601c3a9c3dc7af8f388286fe4da Reviewed-on: https://review.coreboot.org/c/coreboot/+/62348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-02soc/amd/common/psp_verstage: Save transfer buffer during S0i3 resumeRaul E Rangel
We need to save the transfer buffer so we can transfer the cbmem console and timestamps into x86 DRAM. BUG=b:221231786 TEST=Boot guybrush and verify S0i3 resume works. Also dumped the transfer buffer from the OS and verified the console contents got transferred. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1d3b34c90e0e18609b0c6a0cdedab35aeefbd84b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-02acpi/acpi: drop weak cpu_get_lapic_addr implementationFelix Held
All SoCs/chipsets that select ARCH_X86 will end up using the implementation in cpu/x86/lapic/lapic.c, so to avoid confusion, drop the unused weak implementation that returns a different value. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iffcd8c80260f9a7d81dda41a0ad08bffc7620c33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-02mb/siemens/mc_ehl: Disable HS400 mode for eMMCWerner Zeh
In order to achieve a stable eMMC interface disable the HS400 capability of the host controller. This will result in an operating mode of maximum HS200 (200 MHz single data rate) which leads to a more relaxed timing. Change-Id: I0e125dd569b00f59ae0fd2f76169c4461291b47a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-03-02Documentation/mainboard: Add QEMU POWER9 to index siteFelix Singer
The QEMU POWER9 target is supported since coreboot version 4.15. Documentation is available in the tree, but it's not referenced from the mainboard index page. Fix that. Change-Id: Ic3b98735840c146cb0bfb122df0e6f762c2beeca Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-02Documentation: Fix spelling of "QEMU"Felix Singer
Fix spelling and use the one from their website qemu.org. Change-Id: I36a88985ce3a7c59b732c1ca3198d86a591de6bd Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-02Documentation/mainboard: Add Supermicro X9SAE to index siteFelix Singer
The Supermicro X9SAE target is supported since coreboot version 4.15. Documentation is available in the tree, but it's not referenced from the mainboard index page. Fix that. Change-Id: I5d3d0b5b935f1a3ea353a3d9e39208db7c7895ef Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-02Documentation: Fix spelling of "Supermicro"Felix Singer
Fix the spelling and use the one from their website supermicro.com Change-Id: Id630d9d130082fb38f9151e0dfb6f6fbb5a2789d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-02device/pci_device.c: Improve pci_bridge_route() readabilityArthur Heymans
Both the secondary and subordinate bus numbers are configured in this function but it's not easy to search for in the tree as the PCI writes are hidden inside a bigger write to 'PCI_PRIMARY_BUS'. Use separate variables and PCI config writes to improve the readability. Change-Id: I3bafd6a2e1d3a0b8d1d43997868a787ce3940ca9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-03-02soc/mediatek/mt8186: Set RTC capid to 0xC0 to pass XTAL 26 MHz testRex-BC Chen
The XTAL 26MHz test failed on krabby, so we adjust RTC capid from default value 0x88 to 0xC0 for MT8186. We also add a new log message to show the capid value which is read from MT6366. This implementation is according to chapter 5.13 in MT8186 Functional Specification. BUG=b:218439447 TEST=set capid to 0xc0. TEST=XTAL 26MHz test passed. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I16ab46a5697d304e8001de231ffc9b7b7a2f9282 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02mb/google/brya: enable the SPD_CACHE_ENABLEZhuohao Lee
google/brask is using SODIMMs for DRAM. Reading spd data is surprisingly slow (~170 ms), therefore enable the SPD cache. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=run on the device and measure the boot time decrease. Change-Id: If0a0072160a48b607ad17c0a1819ab49eaad92db Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-02mb/google/brya/variants: add the smbus addr for dimm1Zhuohao Lee
Align the setting with the adlrvp BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=build pass and works correctly in the brask Change-Id: Ia4c889e7dd065632e180cf983c7c5ece0c461edd Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-02mb, soc: Add the SPD_CACHE_ENABLEZhuohao Lee
In order to cache the spd data which reads from the memory module, we add SPD_CACHE_ENABLE option to enable the cache for the spd data. If this option is enabled, the RW_SPD_CACHE region needs to be added to the flash layout for caching the data. Since the user may remove the memory module after the bios caching the data, we need to add the invalidate flag to invalidate the mrc cache. Otherwise, the bios will use the mrc cache and can make the device malfunction. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=build pass and enable this feature to the brask the device could speed up around 150ms with this feature. Change-Id: If7625a00c865dc268e2a22efd71b34b40c40877b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62294 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-02util/docker/coreboot-jenkins-node: Alphabetize installed toolsMartin Roth
It's easier to read and to add new packages when each package is on its own line and they're sorted alphabetically. Indenting them also makes it easier to see what's getting installed and what's a command. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ibfe297bd408ed0783fcff09c1ecb5672fe785c48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62446 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-02util/docker/coreboot-jenkins-node: add linkcheckerMartin Roth
The linkchecker tool is now being used to find broken links in our websites. Since it's not needed for building anything, just add it to the jenkins-node Dockerfile instead. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iac2246b5378e556b5cd9f2107fc5a7e51d583b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/62445 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-02mb/google/brya/var/vell: Remove Rcomp settingsGaggery Tsai
This patch removes Rcomp settings. In MRC design, it checks if the Rcomp settings from the board is 0 or null, if so, it uses the recommended Rcomp values. Otherwise, it uses the Rcomp settings passed from the UPD. From the change history of MRC, we're chasing a moving target. This RCOMP setting in coreboot is an old setting while the Rcomp settins in MRC are optimized settings. Moving forward, if there is a new stepping, it might be changed again which increases the maintenance effort in coreboot. IMHO, we should let MRC to set the optimized RCOMP values for the design. BUG=b:219378758 TEST=emerge-byra coreboot chromeos-bootimage and boots up with QS and PRQ CPUs. Checks with MRC log and ensure the RCOMP settings are filled properly by MRC. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: I8547e187b74f9b2cee57ddad2883d60c05d0b9fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 05:34:38 +0000