| Age | Commit message (Collapse) | Author |
|---|
|
Add API to allow AP to send the command to EC to enter DP ALT mode
and API to wait for DP HPD event.
BUG=b:192947843
TEST=select ENABLE_TCSS_DISPLAY_DETECTION in Kconfig.name. Build
coreboot and update your system. Boot the system you will find below
message in the coreboot log with or without USB-C display connected:
'HPD ready after %lu ms' or 'HPD not ready after %ldms. Abort.'.
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: Id11510c1ff58579ae2cddfe5a4d69646fd84f5c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
1. Update google_chromeec_pd_get_amode() to return bitmask.
2. Update google_chromeec_wait_for_displayport() to handle the
updated return value of google_chromeec_pd_get_amode().
3. Drop google_chromeec_pd_get_amode() from ec.h and make it static
because it's not used outside of ec.c.
BUG=b:192947843
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: I6020c4305e30018d4c97d862c16e8d642c951765
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add parameter `active_cable` to obtain the cable type
(active or passive) which is needed for USB-C configuration for
some SoCs (at least Intel TGL and ADL), change the function name to
google_chromeec_usb_pd_get_info() for better understanding.
BUG=b:192947843
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: Ie91a3096d49d5dde75e60ab0f2f38152cef720f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Create a generic interface to allow any of the EC or other drivers
to provide set of USB-C mux operations.
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: Ic5435f2054d1c9f114b06c3b4643e34713290e0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch skips setting D0I3 bit for all HECI devices by FSP.
BUG=b:200644229
TEST=FSP-S UPD dump suggested `DisableD0I3SettingForHeci` UPD is
set to `1`.
Change-Id: I86d61c49b8f187611efd495712ad901184665f31
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57815
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`heci_finalize` ensures to put all heci devices to D3 by setting the
D0i3 bit prior to booting to the OS.
BUG=b:200644229
TEST=Verified D0i3 bit is set for all HECI devices prior to booting
to OS.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I86d5959646522f9a2169bf13ae04d88b8f685e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch creates a helper function in cse common code block to check
the status of any CSE `devfn`. Example: CSE, CSE_2, IDER, KT, CSE_3 and
CSE_4.
Currently cse common code is only able to read the device state of
`PCH_DEVFN_CSE` CSE device alone.
Additionally, print `slot` and 'func' number of CSE devices in case
the device is either disable or hidden.
BUG=b:200644229
TEST=Able to build and boot ADLRVP-P with this patch where the serial
message listed the CSE devices that are disabled in the device tree
as below:
HECI: CSE device 16.01 is disabled
HECI: CSE device 16.04 is disabled
HECI: CSE device 16.05 is disabled
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I208b07e89e3aa9d682837380809fbff01ea225b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch ensures to pass cse device function number as argument for
`set_cse_device_state()` to allow coreboot to perform enable/disable of
D0i3 bit for all CSE devices to put the CSE device to Idle state or
Active state.
BUG=b:200644229
TEST= Able to build and boot ADLRVP where `set_cse_device_state()` is
able to put the CSE device toidle state or active state based on `devfn`
as argument.
Change-Id: Ibe819e690c47453eaee02e435525a25b576232b5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CPU_INFO_V2 now encapsulates the cpu_info requirements. They no longer
need to leak through to thread.c. This allows us to remove the alignment
requirement.
BUG=b:179699789
TEST=Reboot stress test guybrush 50 times.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0af91feddcbd93b7f7d0f17009034bd1868d5aef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit 5f80e7c764b9a1cb46beeaa490a4f60be04abcd4.
The smm_do_relocation failure has been fixed. I also added CPU_INFO_V2
into this patch to satisfy the dependency.
BUG=b:194391185, b:179699789
TEST=reboot stress test guybrush for 50 iterations.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I134c14748711a9c9865e0cc3e3185825f85248ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
CPU_INFO_V2 changes the behavior of cpu_info(). There is now only 1
cpu_info struct per cpu. This means that we no longer need to allocate
it at the top of each threads stack.
We can now in theory remove the CONFIG_STACK_SIZE alignment on the
thread stack sizes. We can also in theory use threads in SMM if you are
feeling venturesome.
BUG=b:194391185, b:179699789
TEST=Perform reboot stress test on guybrush with COOP_MULTITASKING
enabled.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5e04d254a00db43714ec60ebed7c4aa90e23190a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
There is currently a fundamental flaw in the current cpu_info()
implementation. It assumes that current stack is CONFIG_STACK_SIZE
aligned. This assumption breaks down when performing SMM relocation.
The first step in performing SMM relocation is changing the SMBASE. This
is accomplished by installing the smmstub at 0x00038000, which is the
default SMM entry point. The stub is configured to set up a new stack
with the size of 1 KiB (CONFIG_SMM_STUB_STACK_SIZE), and an entry point
of smm_do_relocation located in RAMSTAGE RAM.
This means that when smm_do_relocation is executed, it is running in SMM
with a different sized stack. When cpu_info() gets called it will be
using CONFIG_STACK_SIZE to calculate the location of the cpu_info
struct. This results in reading random memory. Since cpu_info() has to
run in multiple environments, we can't use a compile time constant to
locate the cpu_info struct.
This CL introduces a new way of locating cpu_info. It uses a per-cpu
segment descriptor that points to a per-cpu segment that is allocated on
the stack. By using a segment descriptor to point to the per-cpu data,
we no longer need to calculate the location of the cpu_info struct. This
has the following advantages:
* Stacks no longer need to be CONFIG_STACK_SIZE aligned.
* Accessing an unconfigured segment will result in an exception. This
ensures no one can call cpu_info() from an unsupported environment.
* Segment selectors are cleared when entering SMM and restored when
leaving SMM.
* There is a 1:1 mapping between cpu and cpu_info. When using
COOP_MULTITASKING, a new cpu_info is currently allocated at the top of
each thread's stack. This no longer needs to happen.
This CL guards most of the code with CONFIG(CPU_INFO_V2). I did this so
reviewers can feel more comfortable knowing most of the CL is a no-op. I
would eventually like to remove most of the guards though.
This CL does not touch the LEGACY_SMP_INIT code path. I don't have any
way of testing it.
The %gs segment was chosen over the %fs segment because it's what the
linux kernel uses for per-cpu data in x86_64 mode.
BUG=b:194391185, b:179699789
TEST=Boot guybrush with CPU_INFO_V2 and verify BSP and APs have correct
%gs segment. Verify cpu_info looks sane. Verify booting to the OS
works correctly with COOP_MULTITASKING enabled.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I79dce9597cb784acb39a96897fb3c2f2973bfd98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Some distributions (e.g. NixOS, Debian) are actively working on getting
rid of EOL Python 2. Since `SplitFspBin.py` supports both Python 2 and
Python 3 as of upstream commit 0bc2b07, use whatever version is present
by utilizing `python`.
Change-Id: I2a657d0d4fc1899266a9574cfdfec1380828d72d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: If2a8e97911420c19e9365d5c28810b998f2c2ac8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58078
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds type-c port information for USB type-c ports to cbmem.
BUG=b:149830546
TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot
volteer2 to kernel, log in and check cbmem for type-c info exported to
the payload:
localhost ~ # cbmem -c | grep type-c
added type-c port0 info to cbmem: usb2:9 usb3:1 sbu:0 data:0
added type-c port1 info to cbmem: usb2:4 usb3:2 sbu:1 data:0
Change-Id: Ic56a1ad1b617e3af000664147d21165e6ea3a742
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
New boards introduced to trogdor family.
BUG=b:201263032
BRANCH=none
TEST=make
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I8299ddda14eb82103f17f8464a14992aa757afa6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These methods can now be dropped as Dynamic GPIO PM is enabled.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I0c7b67b5414d8c80775ab7678ce7b12181af7882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
GPIO PM was disabled for brask to evaluate if longer interrupt pulses
are required for ADL. Since ADL requires 4us long pulses (EDS:626817),
GPIO PM can be enabled. This change drops the GPIO PM override and
re-enables dynamic GPIO PM.
TEST=Boot brask to OS, ensure no TPM errors.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I0b8b66b5526d8b80775cb7588ce6b12181af7882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
GPIO PM was disabled for adlrvp to evaluate if longer interrupt pulses
are required for ADL. Since ADL requires 4us long pulses (EDS:626817),
GPIO PM can be enabled. This change drops the GPIO PM override and
re-enables dynamic GPIO PM.
TEST=Boot adlrvp to OS, ensure no TPM timeout errors.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I0b7b66b5525d8b80775ab7578ce6b12181af7882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable SMBus to support DDR4 SODIMM for brask. Enable 'smbus' in
brask device tree and add SPD addressese for the two DIMMs.
Separate the Kconfig items of brya and brask. Move
HAVE_SPD_IN_CBFS and CHROMEOS_DRAM_PART_NUMBER_IN_CBI to brya
and add config SPD_CACHE_IN_FMAP to brask.
Add a new section RW_SPD_CACHE to fmd for caching SPD data.
The renamed romstage.c is used by both brya and brask and a new
function variant_get_spd_info is provided to support the different
SPD source types.
BUG=b:194055762
BRANCH=None
TEST=build pass
Change-Id: I41c57a3df127356b8c7e619c4d6144dc73aeac72
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch feeds PsysPmax setting to FSP through UPD and adds a
PsysPmax member in chip information so that we can set PsysPmax
through devicetree. The PsysPmax needs to be set correctly mapping
to maximum system power. Otherwise, system performance would be limited
due to the default PsysPmax setting in FSP is only 21W.
BUG=b:193864533, b:195615830
TEST=Set PsysPmax to an example value eg 145 in devicetree &&
put debug code in FSP to print the PsysPmax value before sending
to Pcode, ensure the setting is correctly programmed.
Change-Id: Ia07aa815f90739240f110cab984068237c02d896
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move the locally declared typec_orientation enum from chip.h to
coreboot_tables.h.
Change enum typec_orientation name to type_c_orientation for consistency
with contents of coreboot_tables.h.
Rename TYPEC_ORIENTATION_FOLLOW_CC to TYPEC_ORIENTATION_NONE.
BUG=b:149830546
TEST="emerge-volteer coreboot" and make sure it compiles successfully.
Change-Id: I24c9177be72b0c9831791aa7d1f7b1236309c9cd
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds type-c port information for USB Type-C ports to the
coreboot table. This allows depthcharge to know the usb2 and usb3
port number assignments for each available port, as well as the SBU
and data line orientation for the board.
BUG=b:149830546
TEST='emerge-volteer coreboot chromeos-bootimage' and verify it builds
successfully. Cherry-pick CL to enable this feature for volteer,
flash and boot volteer2 to kernel, log in and check cbmem for type-c
info exported to the payload:
localhost ~ # cbmem -c | grep type-c
added type-c port0 info to cbmem: usb2:9 usb3:1 sbu:0 data:0
added type-c port1 info to cbmem: usb2:4 usb3:2 sbu:1 data:0
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: Ice732be2fa634dbf31ec620552b383c4a5b41451
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
A signed bitfield with a length of 1 bit can only have the values 0 and
-1. Assigning a 1 ends up behaving as expected, but it's not the
semantically correct thing to do there. Changing the type of the element
to an unsigned bitfield with a length of 1 would fix that, but since
this is used as a boolean value, just change it to bool type.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I230804335e7a15a8a9489859b20846988ba6c5cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The u8 type is used in the file, but neither stdint.h not types.h was
included in the file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifd67aff9eba01f9618004c869f1473217b3aeae4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Correct OVTI2740 information for Kano:
MIPI camera CIO port, HID and Link Freq
BUG=b:200974074
TEST=Build and boot on Kano
camera driver is not probed before,
and it can now be probed properly
after this change.
Signed-off-by: Lai, Jim <jim.lai@intel.com>
Change-Id: I4612c9d42cd59cba0991b763224f77b7af33770b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
UEFI payload is supported on some ARM64 platforms, for example MT8195.
As a result, add MACHINE_TYPE_ARM64 to support ARM SystemReady.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I4c0c6e263bd2f518a62ff9db44d72dd31086756a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Round the PM Timer emulation frequency multiplier to the closest value
to increase precision.
Test: compared hexdumps of CML binaries for the expected result:
before: 0x262E8B51, after: 0x262E8B52
Change-Id: Iafd645c248fc17943ea4be558ed7d01a301ba809
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57943
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ltiming and clock_div are not support for MT8173, so we separate them
to weak function: mtk_i2c_dump_more_info()
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I3228c6953be5fac18a76029702b878a34c7563f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58074
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. The original algorithm for I2C speed cannot always make the
timing meet I2C specification so a new algorithm is introduced
to calculate the timing parameters more correctly.
2. Some I2C buses should be initialized in a different speed while
the original implementation was fixed at fast mode (400Khz).
So the mtk_i2c_bus_init is now also taking an extra speed
parameter.
There is an equivalent change in kernel side:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/i2c/busses/i2c-mt65xx.c?h=v5.15-rc3&id=be5ce0e97cc7a5c0d2da45d617b7bc567c3d3fa1
BUG=b:189899864
TEST=Test on Tomato, boot pass and timing pass
at 100/300/400/500/800/1000Khz.
Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com>
Change-Id: Id25b7bb3a76908a7943b940eb5bee799e80626a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58053
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures all attempts to read CSE BAR is performing PCI config
space read and returning the BAR value rather than using cached value.
This refactoring is useful to read BAR of all CSE devices rather than
just HECI 1 alone.
Additionally, change the return type of get_cse_bar() from `uintptr_t`
to `void *` to avoid typecasting while calling read32/write32 functions.
BUG=b:200644229
TEST=Able to build and boot ADLRVP where CSE is able to perform PCI
enumeration and send the EOP message at post.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Id4ecc9006d6323b7c9d7a6af1afa5cfe63d933e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CSE_DELAY_BOOT_TO_RO -> CSE_DELAY_BOOT_TO_RO_MS
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I4471e4553a081eaf5c8118e9600497a2b2437ac0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update bugzzy device tree override based on the EVT schematics.
BUG=b:195215785
BRANCH=dedede
TEST=emerge-dedede coreboot
Change-Id: Iba8e3fd24461b4228c6e6fa933c0093e3e45ee97
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This allows the one 32bit register to be configured in the
devicetree in the same way that Skylake can be.
i.e. register "lpc_ioe".
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib1a7f2707e565a5651ebe438320de9597f5742c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update initial gpio configuration for brask
BUG=b:197385770
TEST=emerge-brask coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I71026565b876739d2a08ef79940f47c476ca70a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58041
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are two different types of 282 SKU available with TDP
of 15W and 12W for Alder Lake-M SoC. This patch adds support
for these TDP values for 282 SKU as per document 643782.
BUG=None
BRANCH=None
TEST=Build FW and test on adlrvp board
Change-Id: I553b2362b7bf811e6bf02fd9d68f78c2caeb7398
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
|
|
Set PL4 value dynamically for adlrvp board based on CPU SKUs
which is detectable at runtime. These values are based on
platform design specification.
BUG=None
BRANCH=None
TEST=Build FW and test on adlrvp board
On 682:
Overriding power limits PL1 (4000, 28000) PL2 (64000, 64000) PL4 (140000)
Change-Id: I9c0c418e2548cc7f9aa647a5ad98123b33e9f9b8
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move MILLIWATTS_TO_WATTS macro in power_limit header file
so all other files can use the same macro.
BUG=None
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: Ic7ecba06b0e0a47546f7307cbfbc3ce0fc634bc3
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set power limit values dynamically based on CPU TDP and PCI ID of SKU.
These values are as per platform design specification.
BUG=None
BRANCH=None
TEST=Build FW and test on adlrvp board
Change-Id: I8ba901fe7c978aad43b85a860c71b33bfbff2ff5
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add TPCH as participant for dptf control functionality.
BUG=b:198582766
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: I17c0c6cfb7804dd2caa188acc93f1a63b47cab36
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add PMC IPC commands information for FIVR control functionality
BUG=b:198582766
BRANCH=None
TEST=Build FW and test on brya0 board
Change-Id: I9d08bb71f7ea5da7614c68fc0ce4edf9aef59baa
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
nvme-cli is used to manage NVMe devices and it supports many vendors.
Also, it seems it's commonly used to do firmware updates.
Change-Id: I26a78867b01d3af0441827c5b25343a46d7ddea1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
M.2 spec describes PERST# should be sequenced after power enable.
Follow up commit 658d7c5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I508f7e21888cc1938aa9a6f0066c17029773974b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
M.2 spec describes PERST# should be sequenced after power enable.
Follow up commit 658d7c5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I494e0edc135d730cf7bb437f0196cdf233d970d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update GPIO GPP_B5 and GPP_B6 based on schematics.
BUG=b:197385770
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If83e02eec7c48b9ab41d346aa8baef7c0c881df1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
There are currently two variants for mc_ehl where different UARTs are
used for the console. Move the Kconfig switch UART_FOR_CONSOLE to the
Kconfig of the variant and select the matching value there.
Change-Id: I7152013a0e32ff151b92932a47953705e591dc0d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58052
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new variant of the mc_ehl board called mc_ehl2. This patch just
copies the files and renames things where needed.
Following patches will adapt the needed features for this new variant.
Change-Id: I3ec3c091017fd66fe6a09216203cdc7c9e833846
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Enable LPSS UART for coreboot console on mc_ehl1.
Change-Id: Id995953741d48fbbe2482ff7c0ef81cac5a31207
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add Synaptics touchpad for kano.
BUG=None
TEST=emerge-brya coreboot and check touchpad function work.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Iec43aaa9525309d2a0e3c9822038869786f5fe66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
<clocks.h> and smp_processor_id() aren't used anywhere anymore. Get rid
of them.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1a8c892b066e6ac0e7cec5316633d44165344e78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
On AArch64 platforms, GIC initialization is generally the job of Trusted
Firmware and shouldn't be necessary in coreboot. Only the ancient T210
platform (which was started before we had decided on using Trusted
Firmware) calls this code, and even there they have a comment wondering
"do we still need this?". I'm just gonna assume (without testing because
that board is ancient and I'm lazy) that they don't, and that the TF GIC
initialization[1] is sufficient here. Remove this obsolete driver.
[1] https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/+/3ff448/plat/nvidia/tegra/soc/t210/plat_setup.c#259
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3e9d90039dd27cb3a13f830ba21fc5cc7a70abe2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Bilby uses I2S TDM interface for audio, instead of HDA interface.
Change-Id: I7c8ec02d0e63730cb54a27d3bea1d102e037823d
Signed-off-by: Aamir Bohra <aamirbohra@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
|
|
The value printed is the EPC (Enclave Page Cache) status, but the printk
statement refers to it as `ECP status` instead. Fix the typo.
Change-Id: Iba0a6013f2c537072dd7aa8266f2be3c5b0963ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58038
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot brya
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I4342c7343876eb40c2955f6f4dd99d6346852dc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
|
|
This is to fix SSD detectiong failure in warm boot observed
on ADL-M RVP. This patch implements the coreect power sequence:
SSD_PREST Low - SSD_PWR_EN High - SSD_PREST High
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: If6f9fc17a30c28c2948809cdbade9919d4ddd6c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Append `_MS` for miliseconds and `_US` for microseconds to HECI timeout
macros to improve the code readability.
Change-Id: Ic7f18f07ecaabb3e43356f372d15d18be083464b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Pushing EOP msg post FSP notify helps to save ~30ms+ boot time across
various warm reboots.
This patch ensures late sending EOP msg when function disabling of CSE
is no longer a requirement.
BUG=b:200644229
TEST=Able to save ~30ms+ of boot time
Without this code change EOP sending timestamp as below:
943:after sending EOP to ME 1,248,328(61,954))
With this code change EOP sending timestamp as below:
943:after sending EOP to ME 1,231,660 (2,754)
Change-Id: I2b78a1c07803aacfb34dce9e94b2a05a2491aabc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch ensures soc_finalize() is getting called at the entry of
BS_PAYLOAD_BOOT boot state instead of BS_PAYLOAD_LOAD, BS_ON_EXIT.
The purpose of this change is to accommodate more time to push out
sending CSE EOP messages at post.
BUG=b:200644229
TEST=coreboot serial log suggests soc_finalize() is getting called
as part of the BS_PAYLOAD_BOOT entry.
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
BS: BS_PAYLOAD_BOOT entry times (exec / console): 21 / 15 ms
Change-Id: I8632eca057255d7f4a38b64fd17c1f3d84123051
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Prior to coreboot sending EOP messages during post, it's important to
ensure that CSE is not in Idle state. In case CSE is in Dev Idle
state (which means D0I3 bit is set), reset this bit before sending
EOP command.
This patch ensures coreboot has provision to send CSE EOP messages even
after the FSP Notify phase without any delays waiting for the device
to respond or timeout.
BUG=b:200644229
TEST=Able to send CSE EOP message even after FSP Notify phase.
Attempting CSE EOP msg sending post FSP notify without this code change
causes `timeout` issue as below:
BS: BS_PAYLOAD_LOAD exit times (exec / console): 171 / 0 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
HECI: timed out reading answer!
HECI: Failed to receive!
HECI: receive Failed
HECI: EOP send/receive fail
ERROR: Failed to send EOP to CSE, 2
cse: CSE status registers: HFSTS1: 0x90000255, HFSTS2: 0xf10516 HFSTS3:
0x20
VB2:vb2api_fail() Need recovery, reason: 0x31 / 0xc
Saving nvdata
board_reset() called!
full_reset() called!
Attempting CSE EOP msg sending post FSP notify with this code change
is `successful` as below:
BS: BS_PAYLOAD_LOAD exit times (exec / console): 170 / 0 ms
Finalizing chipset.
apm_control: Finalizing SMM.
APMC done.
HECI: Sending End-of-Post
CSE: EOP requested action: continue boot
CSE EOP successful, continuing boot
Change-Id: Iae1bc52e94b08f97004424ea0c147d6da8aca6e2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch ensures APIs that are responsible for CSE device state
transition between active to idle and vice-versa are available
publically for other modules/boot stages to consume.
BUG=b:200644229
TEST=Able to build and boot ADLRVP-P.
Change-Id: Ia480877822d343f2b4c9bf87b246812186d49ea3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update to recommended Rcomp drive strength value for DDR4 as per
MRC team's input.
Additionally, add space around the `targets` array.
Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507d99a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
M.2 spec describes PERST# should be sequenced after power enable.
BUG=b:201512872
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ie164ddb29f947e190fa87b31165e3c84b07926e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58034
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3677b4e545599d00a4ba16464836834febc2d1a5
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58024
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These platforms no longer use reg-script. Drop unneeded select.
Change-Id: I8fc4dc29d25dffbf9ed1947d0ff013b2fae0faaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Using reg-script just to read-modify-write some registers makes no
sense. Replace reg-script usage with regular register operations.
Change-Id: I87d1278360a231cbe5b5f825ad9a448e59e63ea2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Using reg-script just to read-modify-write some registers makes no
sense. Replace reg-script usage with regular register operations.
Change-Id: Ib3c83131c30fd02c579b910cfad6843eb28ba8f1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The current names of the PMC init/enable callbacks are very confusing.
Rename them.
Change-Id: I69f54f3b4e1ea9a9b4fa5c8dd9c0d454d7cd1283
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In CB:52662 when MIPI display support was added, we accidentally changed
the code flow for eDP displays such that i2c_init() will no longer be
called when display_init_required() is false. This is a problem because
on this platform, i2c_init() does not just prepare the I2C controller
for firmware use, it also loads firmware to the controller that makes it
behave like an I2C device in the first place -- a step that the kernel
cannot later do on its own if the firmware didn't already do it.
Skipping this initialization means the I2C controller becomes unusable
to the kernel.
This patch fixes the issue by making the i2c_init() unconditional again.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ie4546c31d87d91113eeef7dc7a18599a87e6d6eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58026
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the `ecps` GNVS struct member to `epcs` to match the name in ASL.
Change-Id: I1f6b97309eea75e7dbb4e5e664660df05ec0845e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Initializing SAR sensor (QUP2, address 0x988000)
BUG=b:198456205
BRANCH=None
TEST=Boot into kernel and make sure no i2c errors for 0x988000 in
dmesg
Change-Id: I75b0e9173d4c49b5e7308158a678964d6637b225
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:182963902
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -c max -B
Change-Id: I10f8a9682200b883474dc385331c5dae84cbdb08
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
For Herobrine variants that include a finger print sensor, we will
need to power sequence it. We are using the same FP sensor as
trogdor, so we will follow the timings used for trogdor from
CL:2695676.
BUG=b:198474942
BRANCH=None
TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -c max -B
Change-Id: Ica6eafc47cf1b95eeb8d94c6e0a8c88519665e3f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58021
Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ID "10029836" for machine driver, "RTL5682" for ALC5682I and "MX98357A" for MAX98360.
BUG=b:198716348
TEST=Build nipperkin, codec is functional with new machine driver.
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Change-Id: Iab9d11adb7cd08effa2a9b6a627832bd89cb3cb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Updating from commit id c5a482ed:
2021-09-08 17:16:59 +0000 - (sign_official_build: disable gsetup for reven)
to commit id 13f601f:
13f601f vboot: boot from miniOS recovery kernels on disk b
This brings in 14 new commits.
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: I66788ea434a6000435b97ce64107f3b5da882414
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57994
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define SSFC bit 9-11 in coreboot for codec within ec.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:193694180
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: Iba91b51cbbe7adc502372c9a026867de61d8035d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Mancomb mainboard has been cancelled. Hence delete the board support.
BUG=b:190404616
TEST=None
Cq-Depend: chromium:3188634
Change-Id: I3ce02efb1fa5ea488447099abe08da6051fb6fc6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The %fs and %gs segment are typically used to implement thread local
storage or cpu local storage. We don't currently use these in coreboot,
so there is no reason to map them. By setting the segment index to 0,
it disables the segment. If an instruction tries to read from one of
these segments an exception will be raised.
The end goal is to make cpu_info() use the %gs segment. This will remove
the stack alignment requirements and fix smm_do_relocation.
BUG=b:194391185, b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa376e562acc6bd1dfffb7a23bdec82aa474c1d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This CL adds support for new ADL-M graphics Device ID 0x46c3.
TEST=boot to OS
Change-Id: Ib55fb501f96fe9bcc328202511bbfe84a3122285
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add ADLP 242 sku PLx related settings, which follow the settings of
ADLP 282 sku (both are 15w).
BUG=b:201253904
TEST=USE='fw_debug' emerge-brya intel-adlfsp coreboot chromeos-bootimage
Change-Id: If9b60893ab3e2c4a88e7d2cf45223c5fbce6f847
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add ADLP 242 sku power related settings, which follow the settings of
ADLP 282 sku (both are 15w).
BUG=b:201253904
TEST=Build and check fsp log to confirm the settings are set properly.
Change-Id: I829dd690c22d167a507b1910106da06b275cec09
Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The voltage rail discharge times have been measured, so therefore
the boot time on a cold boot when the CSE must go through a global reset
and thus a trip to S5 can be optimized. Select the lowest applicable
value for each PchPmSlp UPD that can be used with these measurements.
This is programmed in the baseboard because the measured discharge times
leave (what should be) plenty of margin for variants to also not violate
any power sequencing guidelines from the PDG.
BUG=b:184799383
TEST=verified time in S5 during a global reset is ~1s instead of 4s
Change-Id: Ia373c47b3967d68ddac21707c6eb4565d9d6519e
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The UPDs for PM power cycle duration and SLP_* signal durations are all
identical to Tiger Lake, so add similar support, but use enums instead
of comments to represent the durations symbolically.
BUG=b:184799383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4a531f042658894bcbc6a76eff453c06e90d66b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57891
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support for drawcia_legacy board is cancelled. Hence remove the board
support.
BUG=b:192256341
TEST=None
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I76cd3e388439f5aee94a17fe35ae210f449cfbfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
|
|
Support for Boten_legacy board is cancelled. Hence remove the board
support.
BUG=b:192256341
TEST=None
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If26dc869ff95dff70c0f83a13f6f727aa5992dbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
|
|
Wheelie variant board has been cancelled. Remove wheelie variant board
support.
BUG=b:192256341
TEST=None
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3ad5bc1c987feb55183a663937794781c7301a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
|
|
Cappy variant is cancelled. Hence delete the cappy variant support.
BUG=b:192256341
TEST=None
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If43188a3e6bf4f4449c7e2d08be7609efe58dca1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
|
|
These methods are never used in the code. Drop them.
Change-Id: If5568b494f821d2647ada5ae845bcd015708520e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
These fields are never used in the code. Drop them.
Change-Id: Icd07f2d704c19126bf6df4d740c21d5a1342061b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This field is never used in the code. Drop it.
Change-Id: I88207ec369ab83823ef2f3fc40f68a0980ce9663
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
DFD (Design for Debug) is a debugging tool, which scans
flip-flops and dumps to internal RAM on the WDT reset.
After system reboots, those values could be showed for
debugging.
BUG=b:192429713
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507c99b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57980
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused drivers and some fast calibration implementations
to align with the latest MTK memory reference code.
TEST=boot to kernel
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: I2e6be2e16c139e48c65352fe2eabf16bf9cd550a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57978
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move includes using library paths to the top and remove unnecessary
comments. Also, get rid of that unnecessary _SB scope. Use an absolute
path for the PCI0 device instead.
Change-Id: I2c4fb1933eda2eb75bfe9181f13e189ec66cadf9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
NVMe needs extra time to run boot process, enable power and deassert
reset for NVMe earlier in the boot flow that taeko can successfully
boot into OS with non-serial coreboot.
BUG=b:199969366 & b:200711149
TEST=Build FW and test with non-serial FW reboot 20 times pass.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I032c5b90fb2148c4075d6ead3e4161c0cc659b20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add wifi sar for magma.
Due to fw-config cannot distinguish between magolor and magma.
Using sku_id to decide to load magma custom wifi sar.
BUG=b:192423859
TEST= emerge-dedede coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Iac15e958e61be6e3c136fb9be18b4695823ad1c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Currently, static analyzers don't recognize that hlt() doesn't return,
so they show errors like uninitialized variables assuming that it does
return. This takes care of that problem.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ia2325700b10fe1f89d749edfe5aee72b47d02f2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update PL1 min and max values to 6 W for Galith/Gallop systems.
BUG=b:201010771
BRANCH=None
TEST=Build and verify on Galith/Gallop system
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I0dfda3c2c830a2ce203668431f396859e782aa3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The headers added are generated as per FSP v2374_01.
Previous FSP version was v2347_00.
Changes Include:
- Offset change in FspmUpd.h and FspsUpd.h
BUG=b:201239436
BRANCH=None
TEST=Build and boot brya
Cq-Depend: chrome-internal:4150766
Change-Id: I097e854bcb4033bdaf2498fb97b255e87d3dd70f
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57920
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
