Age | Commit message (Collapse) | Author |
|
This patch performs below operations
1. Add few more MCH, ESPI and IGD IDs
2. Remove TGL-H IDs
3. Rename existing as per applicable names
4. Remove TODO from report_platform.c file
5. Include TGL IDs into report_platform.c file
Change-Id: I7bb3334d0fe8ba72e394d1a63b3a73840b4eaf2f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This file is only included in romstage.
Change-Id: Ib9ee6e88e7a6ef81034de608232a05e92a16d5f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for
boards not configuring it.
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The CBFS master header is a legacy structure that just conveys the same
information we already have from the FMAP these days. We're still
including it to support older CBFS implementations in some payloads, but
there's no need for coreboot itself to follow this indirection anymore.
This patch simplifies the default CBFS locator to just return the CBFS
offset and size from the FMAP directly.
Change-Id: I6b00dd7f276364d62fa1f637efbaee0e80607c49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36688
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an optional pre-RAM cache for the FMAP which most
platforms should be able to use, complementing the recently added
post-RAM FMAP cache in CBMEM. vboot systems currently read the FMAP
about half a dozen times from flash in verstage, which will all be
coalesced into a single read with this patch. It will also help
future vboot improvements since when FMAP reads become "free" vboot
doesn't need to keep track of so much information separately.
In order to make sure we have a single, well-defined point where the new
cache is first initialized, eliminate the build-time hardcoding of the
CBFS section offsets, so that all CBFS accesses explicitly read the
FMAP.
Add FMAP_CACHEs to all platforms that can afford it (other than the
RISC-V things where I have no idea how they work), trying to take the
space from things that look like they were oversized anyway (pre-RAM
consoles and CBFS caches).
Change-Id: I2820436776ef620bdc4481b5cd4b6957764248ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
This patch makes the CBFS default locator .locate() callback externally
available so that code which overrides cbfs_master_header_locator can
reuse or wrap it and doesn't have to copy&paste the whole thing. Use it
for the Eltan vendorcode implementation which previously did this.
Change-Id: I54dad5c8ea64ea0fc472217e275daa815736991e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36797
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make these more consistent with later platforms. Followups will
do a more complete refactoring of set_acpi_mode() implementations.
Change-Id: I6a05b7600ebdc49915157eaff229459a1eea754c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
PARALLEL_MP path also calls smm_lock().
Change-Id: I270fc8266d118cd1e7245ea70b707a03aedac209
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ic807f4b4fc26232301f81c8076daf31fe58f217b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of using MAX of (cores_enabled, MAX_CPUS), use MIN
which is correct.
TEST=tested with dmidecode
Change-Id: Id0935f48e73c037bb7c0e1cf36f94d98a40a499c
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
All stages on this board are very close to the limit, so enable
RETURN_FROM_VERSTAGE so that we can overlap verstage and romstage to
use the available SRAM more effectively. (Coincidentally, this also
reduces verstage size quite a bit... maybe we should consider just
making this the default at some point, there are really no downsides.)
Change-Id: I2b91fd13d147f964bcbd7b2850f8a0931ea060df
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The normal romcc bootblock uses this.
Change-Id: I60f735f703a9208911f5cc8a81930535e574644d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36755
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The structs and function definition in that header require it.
Change-Id: I3466ff1a28459d0285e27d368314faf747e2eac1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This removes some of the sb code in the nb.
Change-Id: I2ab894be93f210220fa55ddd10cd48889f308e5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
BUG=b:144297264
TEST=Boot with W25Q128JW_DTR and check MRC data save/restore works.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ica6344556e5de94555b95dd7c6df5600614811e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Static declarations for use with SMM_ASEG conflict those
declared globally for use with SMM_TSEG.
Change-Id: I8d2984cd8fe6208417b2eda0c10da8fc7bb76cf1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35892
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set GPP_C4 default to low to fix leakage voltage problem on touchscreen during power on.
BUG=b:142368161
BRANCH=Master
TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure touchscreen works.
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ie9197192c9d6dfb30c10559990c6010b1b2d3a45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36670
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
bootmem_allocate_buffer() displayed "unitialized", this is changed to
"uninitialized".
BUG=N/A
TEST=build
Change-Id: I84ae689ddb24f3e3d2387735faf3850e6bd6dfa9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This code lacks the temp_ram_init_params sybols so the FSP-T option
so it would fail to build.
Change-Id: Ie7d75943d89a964d0189f921fc433e4b9adfb0c5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
This code lacks the temp_ram_init_params sybols so the FSP-T option
fails to build.
Change-Id: I2b6278bd64a3579ed3460af39ea244c7dfd51da4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
|
|
Created helios_diskswap as a variant of helios (hatch variant).
BUG=b:143378037
BRANCH=None
TEST=none
Change-Id: I6536b3908ec569e1ac42ea7c5be85701012ab177
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This is more in line with how linker symbol for regions are defined.
Change-Id: I0bd7ae59a27909ed0fd38e6f7193816cb57e76af
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Add 16G 2666 2 bank group
2. Add 16G 3200 4 bank group
BUG=b:142762387
TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC)
Change-Id: I04810091ef2bf8ec1bd306ad141a70436638eac8
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This patch replaces and cleans up the redundant PTN3460 driver files in
/mainboard/siemens directories by using the now available driver in
src/drivers/i2c/ptn3460 and providing mainboard specific functions to
the driver.
TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...).
Change-Id: I976a502e7176a356bab772758250db3cdff529b9
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36643
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides a chip driver for the DP-2-LVDS bridge PTN3460.
The bridge is configured via I2C. As the mainboard has all the
information regarding the attached LCD type, there are three hooks into
mainboard code to get the information like EDID data and PTN config.
TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...).
Change-Id: Ie4c8176cd16836fa5b8fd2f72faf7a55723b82f6
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: Id706da33f06ceeec39ea50301130770226f0474e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Generic LPC decode ranges can now be set from the devicetree.
Change-Id: I1065ec770ad3a743286859efa39dca09ccb733a1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CB:36385 makes dock init in ramstage fully mainboard-specific, so
keeping generating empty h8_mainboard_init_dock() for lenovo EC becomes
unnecessary and problematic.
Change-Id: I19f57f41403ffd0319cc86f21bec7e142095df83
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When 'make clean' is executed and there is no source code cloned for
GRUB2 in payloads/external/GRUB2/grub2 (so GRUB2 has never been used on
this tree) an error message is thrown:
"fatal: cannot change to 'grub2': No such file or directory"
This error happens when there is no grub2 directory and is caused by
line 20 in payloads/external/GRUB2/Makefile where a shell command is
used to check the state of the git repo for grub2. Thought the target
for this code (checkout) is not executed by 'make clean' the shell
evaluates the command as part of the Makefile sourcing and encounters a
missing directory.
This patch fixes this error by checking for the project directory before
the git status of the repo is evaluated.
Change-Id: Ieaa919e1ee5ec2a1ec3c840fa07a6ec16d230e88
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This mainboard needs VT-d to be enabled. Do so in devicetree.
Change-Id: I9f2f733163be019ac329660d7633b48c5d7896f1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Change-Id: I1b013c4d7012f1db9591bea98ec1fe7acbc85afe
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36751
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This cleans .config from unused UDK_VERSION's symbol.
Change-Id: I2a17db711f615d388dbd964f67ff2cc7875c54fb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34536
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CONFIG_SOC_INTEL_COMMON_BLOCK_SA_FSP_TOLUM
CB:36620 moves common cbmem_top_chipset to fsp driver hence no need to have
dedicated kconfig as in SOC_INTEL_COMMON_BLOCK_SA_FSP_TOLUM
Change-Id: I3914993754ba409867399e903e5d13e929a92e1d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
New boards introduced to Kukui family.
BUG=None
TEST=make # select damu and kappa
Change-Id: I7154aeee921114b7d12bf586adca250df19a3883
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Discussed in CB:36093, in the past many lenovo boards need to declare
an empty h8_mainboard_init_dock() to satisfy h8.c.
Now the confusing H8_DOCK_EARLY_INIT might be retired, and if a
mainboard needs dock init (done with h8_mainboard_init_dock() in the
past) in ramstage, (discussed in CB:4294 where H8_DOCK_EARLY_INIT is
introduced) it can just do it in its own chip_ops.enable_dev function.
Tested on X200. Testing on other affected targets may be necessary.
Change-Id: I5737406d1f6cb6e91b2e2fa349a206a3dba988d1
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Don't select the VBOOT fmap as default if VBOOT is disabled.
Fixes a regression introduced by f8251b98
"mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings
wouldn't allow the qemu boards to run.
Also fix the Supermicro x11-lga1151 series boards.
Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MSR_CONFIG_TDP_NOMINAL is used by 'cpu_get_tdp_nominal_ratio' to return the
TDP Nominal Ratio.
Change-Id: I4c8df7a4100c185c1430d993f7618ed00fc556ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I2e79ff3352fe974a070b7b3f5e4b5570ed2b294c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
<console/console.h>
Change-Id: Ia4e496d359036591131c1ec0243d64c58823ca63
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ib66616ddefe6254c7c64f223c4f3f7cc8d198bb7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Fix regression with commit 0a4457f
lib/stage_cache: Refactor Kconfig options
AGESA platforms fail to resume from S3 suspend with
CBMEM_STAGE_CACHE=n. For the time being the root cause
is unknown.
Change-Id: I11db0c883b6e39473d02e92b14cb3c6302aa728e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The superio VSBGATE# functionality needs to be enabled for ram to be
powered during S3.
Change-Id: I7b827e025de7d5b53c587872238a411fc9c2e762
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36709
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The common cbmem_top_chipset implementation uses the FSP bootloader HOB,
thus move it to the fsp driver which is a more appropriate place.
Change-Id: I914df51a7414eb72416f816ff8375a13d5716925
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36620
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: David Guckian
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This replaces denverton_ns's own implementation of cbmem_top_chipset and
selects the common code one.
Change-Id: Idae96aabe2807e465bb7ab0f29910757d0346ce9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36619
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The flags parameter of the tpm2_get_capability_pcrs() is used by
mboot_hash_extend_log().
BUGS=NA
TEST=Build
Change-Id: Ia718d27f21d41a5e16230c74ca402ea6099470b2
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
In some case where the flash space is limited or when a large payload such as LinuxBoot
is used, the RO region may not be large enough to contain all components that would
normally be added.
This patch adds the possibility to add specific components to the RW regions only in
the same way as the RO_ONLY_SUPPORT does for the RO region.
Please note: this applies only to the items that would normally be added to all regions.
If the payload is directed to the RW region only, a recovery payload needs to be added
to the RO region manually.
BUG=N/A
TEST=build
Change-Id: Ie0df9b5dfc6df4f24efc5582a1aec9ecfb48c44d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36544
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EBDA support was dropped.
Change-Id: I83d838b79e2653d4e3764cfc7deaca9bb241deab
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36718
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The TPM chip needs to be added to the devicetree so that the ACPI tables
will be generated for it. These ACPI table entry is used by the OS to get
the location of the TPM chip.
Change-Id: Ic40d1cf236dd849f04f088808d94b6dd81e3238a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This mainboard variant uses SD-card and not eMMC. Therefore eMMC
controller is disabled while SDHCI is enabled.
Change-Id: I40b314905730b5d74c674d2251f8a4e5c807805f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36676
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On this mainboard variant the PCIe-2-PCI bridge is used a bit different.
Adjust the switched off clock lines to match the mainboard
configuration.
Change-Id: I16f3b6eed0948c8201baecdfbb8052c6c1c335c8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
mc_apl6 uses VBOOT scheme so enable it as default.
Change-Id: I341180f3815ff9f3b2db801d9d989119a2585b03
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This patch adds a new mainboard variant called mc_apl6 which is based
on mc_apl3. So far only the names have been adjusted with no further
changes. Following commits will introduce the needed changes for this
mainboard variant.
Change-Id: Ic935f6cc1f037947b2c167696d40da8309e4d4f0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This replaces quark's own implementation of cbmem_top_chipset and
selects the common code one.
Change-Id: I445c471b654abfa922b20215e52a2794529be120
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This replaces apollolake's own implementation of cbmem_top_chipset and
selects the common code one.
Change-Id: I11d12a6c8414a98d38be8b0dbf6dc57cd2efc5d6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36618
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use monotonic timer to accumulate the time spent in
console code.
For bootblock and romstage, only stage total is reported.
For ramstage each boot_state is reported individually.
Change-Id: Id3998bab553ff803a93257a3f2c7bfea44c31729
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I0f9a5afe85068e6ef2a0b0d088557b0dd1e5bd91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I0f02a4508b78cdb0706df6f288138a9db54e229e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36703
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id5a6b7c731b65aafbb88a7c52a1f434dbab41f4a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36694
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I82f1d4325ea87585137fa81567aa82b80454c704
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
RK3288 is running out of space again. I believe reducing the CBFS cache
size this much should be safe. I don't really care to test it either
though. We should probably just deprecate that SoC at some point, it's
just causing too much pain.
Change-Id: Id8f971606a7a183d3e9af8bbb1b353e518ec24c8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
With the 0.71586+ Goodix FW, we can reduce the reset delay from 500ms
to 120ms. We should do the change in coreboot device tree after we
ensure Helios DVT build is flashed with 0.71586+ Goodix FW.
BUG=b:142316026
BRANCH=None
TEST=./util/abuild/abuild -p none -t google/hatch -x -a
Change-Id: I000ee4ea84c598b437992f1000f6e5b561cae605
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
|
|
Provide region_device_end() and make region_end() publically available
for use to match a pattern of open coding the offset + size calculation
for both struct region and struct region_device. Apply the use of the
helpers where the usage matches in the code.
Change-Id: Iaef5d007eef9a77f7f33b0e89298abef0197352d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36689
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of open coding an offset of 0 and querying the size of a
region device provide a rdev_chain_full() helper function that
does that for the caller. For the existing users that match this pattern
convert them to using rdev_chain_full().
Change-Id: Ie316790a8a5b16a7f7e22f86f58bd2e633c19450
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36683
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce update* as equivalent of pci_update* for mmio operations.
Change-Id: I9f188d586c09ee9f1e17290563f68970603204fb
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36596
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add soc implementation for the new ETR address API.
Change-Id: I8383a60c2c4988948ab8b3e9a54330269d217868
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36568
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add soc implementation for the new ETR address API.
Change-Id: Ifc128099185a2c40ec3e7c5f84fcc42227c93f28
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36567
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add soc implementation for the new ETR address API.
Change-Id: I1832f5f14055fc3dbb502289035130ca7a5d6d33
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new API to get the ETR register address.
Change-Id: I706f3e220d639a6133625e3cb7267f7009006af2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36565
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add helpers for getting the pci mmio cfg address for a register.
Change-Id: Ie6fe22cacc7241a51d47cbe9fc64f30fa49d5a80
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36686
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the first CSW transfer failed, get_csw function will retry
CSW transfer again, but the return value is not updated.
Change-Id: I289916baa08d0a189d659164a0002347f6f435db
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ia881cfa9382d0b2fa2652696b912030af942b68a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The FSP loops through microcode updates and at the end checks if
the microcode revision is not zero. Since we update the microcode
before loading FSP, this is the case and a fake microcode can be
passed to the FSP.
The advantage is that the Kconfig symbols to specify the location and
the size of the microcode blob can be dropped.
Change-Id: I63cfb7b19e9795da85566733fb4c1ff989e85d03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36255
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The google FSP Braswell version has broken microcode update code and
FSP checks at some point if the installed microcode version is non
zero, so coreboot has to update it before calling FSP-T.
This is fixed with newer FSP releases by Intel, but doing updates in
coreboot won't hurt.
Tested with both Intel FSP and google FSP.
Change-Id: I3e81329854e823dc66fec191adbed617bb37d649
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36198
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5a8239f4e9e1f9728074ff5452c95d3138965d82
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
With the common southbridge SPI code reinitialization after lockdown
is not necessary, hence the SMM finalize call becomes a no-op.
Change-Id: I4d7c6ba91dc9f0e0ce4e3228fdf859d5f3d5abf4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36004
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id906733ac3719c8d6835aad52ca87beb81b5771d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Iedb9a8962ac1b4107e9192b0be610fb92d2cfdc6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
All code in southbridge/intel/common is now properly guarded by a
Kconfig symbol, making SOUTHBRIDGE_INTEL_COMMON obsolete.
Change-Id: Ifeccfaa9534f903e3f3543e1f9f3d5f3345b461e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36438
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id706919835100903dd4ebac2bbd2f3a44c2b6b60
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I7321da453c0d9bb4a142c3c93103d8dc0ff416b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This hook is unused and with the need for initializing storage to
share cbmem_top over other stages gone, there is likely no future
need for this.
Change-Id: I4ba9daea61b6d7b8949bbd2c4fb71d0a0fa20d93
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is unused now.
Change-Id: Ie8bc1d6761d66c5e1dda40c34c940cdba90646d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is no need to use EBDA to pass cbmem_top from romstage to
later stages.
Change-Id: I46e2459ff3c785f530cabc5930004ef920ffc89a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Saving cbmem_top across stages is not needed anymore so EBDA should
not be used. The guard to cbmem_top_chipset implementation was
inappropriate.
Change-Id: Ibbb3534b88de4f7b6fc39675a77461265605e56e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
All targets now have the _cbmem_top_ptr symbol populated via calling
arguments or in the nvidia/tegra210 case worked around by populating
it with cbmem_top_chipset explicitly at the start of ramstage, so the
Kconfig guarding this behavior can be removed.
Change-Id: Ie7467629e58700e4d29f6e735840c22ed687f880
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36422
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on the Qemu-Virt target both 32 and 64 bit.
Change-Id: I5c74cd5d3ee292931c5bbd2e4075f88381429f72
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36558
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the vast majority of cases the bootdevice is the bottleneck and
compression increases bootspeed.
Change-Id: Id0c11cf6d9a605d24e3148abb8d11a65d48a4529
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We generally do not guard source in attempts to reduce
the final object sizes, but rely on garbage collection.
Most of the __unused attributes inserted here will be
removed when remaining __SIMPLE_DEVICE__ guards can
be removed.
Change-Id: I2440931fab4f41d7e8249c082e6c9b5a9cd0ef13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36641
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8daf8868af2e8c2b07b0dda0eeaf863f2f550c59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36648
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate.
Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested, working:
- First dimm slot of each channel
- USB, SATA
- CPU FSB at 800, 1067 and 1333MHz
- Libgfxinit on DVI and VGA slot
- PCI slot
- Realtek NIC (configure MAC address in Kconfig)
- PEG slot
- PS2 keyboard
Tested, not working:
- second dimm slot for each channel. Those are hooked up to the second
rank of the channel, instead of rank 3 and 4. The raminit does not
support such setups.
Untested:
- PCIe x1 slot, likely works fine
- HDMI
Tested using SeaBIOS 1.12, Linux 4.19.
Change-Id: I88fe9c66dae079cd7eedcc9736c5922defbc0e5a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Clone entirely from Icelake
List of changes on top off initial icelake clone
1. Removed Descriptor Name for Memory mapped SPI flash and
local APIC in northbridge.asl
2. Rearranged code in gpio.asl to move RBUF object under _CRS
and made the file use ASL2.0 syntax.
3. Make use of absolute path for scs.asl
4. Remove unused smbus.asl
5. Rearranged code in nothbridge.asl to move MCRS object under _CRS,
use absolute variable path and added TODO for further clean up.
6. Refer absolute variable path in scs.asl
Change-Id: If967cb5904f543ce21eb6e89421df0e5673d2238
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Clone entirely from Icelake
List of changes on top off initial icelake clone
1. Replace "Icelake" with "Tigerlake"
2. Replace "icl" with "tgl"
3. Replace "icp" with "tgp"
4. Rename structure based on Icelake with Tigerlake
5. Remove and clean below files
5.a Clean up upd override in fsp_params.c,
will be added once FSP available.
5.b Remove __weak functions from fsp_params.c
5.c Remove dGPU over PCIE enable Kconfig option
6. Add CPU/PCH/SA EDS document number and chapter number
7. Remove unnecessary headers from .c files based on review
Tiger Lake specific changes will follow in subsequent patches.
1. Include GPIO controller delta over ICL
2. FSP-S related UPD overrides as applicable
Change-Id: Id95e2fa9b7a7c6b3b9233d2c438b25a6c4904bbb
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36087
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clone entirely from Icelake
List of changes on top off initial icelake clone
1. Replace "Icelake" with "Tigerlake"
2. Replace "icl" with "tgl"
3. Replace "icp" with "tgp"
4. Rename structure based on Icelake with Tigerlake
5. Remove and clean below files
5.a Clean up upd override in fsp_params.c,
will be added once FSP available.
5.b Remove __weak functions from fsp_params.c
6. Add CPU/PCH/SA EDS document number and chapter number
7. Add required headers into include/soc/ from ICL directory
Change-Id: I24980c196efb2c5569996ca4fb315c256cf9de87
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36552
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clone entirely from Icelake
List of changes on top off initial icelake clone
1. Replace "Icelake" with "Tigerlake"
2. Replace "icl" with "tgl"
3. Replace "icp" with "tgp"
4. Rename structure based on Icelake with Tigerlake
5. Add CPU/PCH/SA EDS document number and chapter number
6. Add required headers into include/soc/ from ICL directory
Tiger Lake specific changes will follow in subsequent patches.
1. Add Tigerlake specific device IDs (CPU/PCH/SA)
Change-Id: Id7a05f4b183028550d805f02a8078ab69862a62e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
EC_HOST_EVENT_xxx are only defined with ec/chromeec.
Change-Id: Ie0a1349ab460142dc2744155a422b5ee22528e4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable vendorcode measured and verified boot.
Use VBOOT test key for VENDORCODE_ELTAN_VBOOT_KEY_FILE
BUG=N/A
TEST=booting Embedded Linux 4.20 kernel on Facebook FBG1701
Change-Id: Ia2cb3bb873b2d5e7e9031e5b249d86605d8e0945
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
EC_HOST_EVENT_xxx are only defined with ec/chromeec.
Change-Id: Idf7b04edc3fce147f7857691ce7d6a0ce03f43fe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I5378573f37daa4f09db332023027deda677c7aeb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36646
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iedd54730f140b6a7a40834f00d558ed99a345077
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|