| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I7c3fd942318f28b4714bc7c2a47bedf85f7923ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
By default legacy ISA IRQs use edge triggering. Depending on what
devices are used the IRQ types might need to be changed. We add a
setting to the device tree to allow the mainboard to configure the IRS
IRQs.
BUG=b:145102877
TEST=Booted trembyle and was able to use the keyboard.
Change-Id: Ie95e8cc7ca835fb60bee8f10d5f28def6c2801dc
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2033493
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This Super I/O was not being built at all. Correct that.
Change-Id: Id053fa919cac7b2df6a6fc45aae5e34a0dc8c0ae
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
On AGESA f14/f15tn, various RAM-related options were defined in an enum.
However, the preprocessor mess can't compare enum values. To make AGESA
build, each board redefined them as macros, shadowing the enum elements.
Clean this up by replacing the enums with macros in AGESA headers, and
delete the now-redundant redefinitions from all the mainboards.
Note that AGESA f16kb already uses macros, but each mainboard still had
commented-out definitions. Remove them as well, as they are unnecessary.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ie1085539013d3ae0363b1596fa48555300e45172
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41666
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All AGESA f16kb boards use the same MTRR values. Factor them out,
while still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I236e9d45505e92027acc3ba5ff496f5e2f09b9f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
All AGESA f15tn boards use the same MTRR values. Factor them out,
while still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I90c95493de1bb5b8f32c06b9575fef3aa7aca031
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
We use the same values everywhere, so we might as well factor them out.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ie6f166034d5d642dff37730a8d83264fb2e019b4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
We set BLDCFG_PCI_MMIO_BASE and BLDCFG_PCI_MMIO_SIZE to the same values
everywhere, so we might as well factor them out. As we have equivalent
Kconfig options in coreboot, also deprecate overriding them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I7244c39d2c2aa02a3a9092ddae98e4ac9da89107
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
All AGESA f14 boards use the same MTRR values. Factor them out, while
still allowing a board to override them via BLDCFG.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Id980e4671e51fe800188f0a84768a307c8965886
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
AGESA f14 only uses INSTALL_FAMILY_14_SUPPORT. Drop the rest.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I2fc6ba94cde66a238da9705fc42330b9e7682800
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41593
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AGESA f14 only uses INSTALL_FT1_SOCKET_SUPPORT. Drop the rest.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I48efa7496c8101115b4735a99c8c472ac65c0523
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41592
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use the same AGESA version numbers on all but one mainboard, so we
might as well factor them out. The only exception is asrock/e350m1,
which has the f15tn/f16kb version number even though it actually uses
AGESA f14. To preserve reproducibility, do not change it in this commit.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I0dad2352ccda454d5545f17228d52e4ff4f23f20
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41591
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use the same value everywhere, so factor it out. Note that the field
where this value ends up in was doubled in size for AGESA fam16kb, but
we did not update the definition to fill in the additional space. We are
not changing it in this commit so as to preserve binary reproducibility.
In any case, add a FIXME explaining why this value may not be correct.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ied118d534ee1e9728db843944d1e042760b4f32c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Drop multiple blank lines and use one space inside C-style comments.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: Ibe1f279dd22ae7657ea7b7766f88004dbf4dceb5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This does not exist anywhere in the entire coreboot tree. Drop it.
TEST=Use abuild --timeless to check that all AGESA f14/f15tn/f16kb
mainboards result in identical coreboot binaries.
Change-Id: I80320a20f4b44896e72d701a1d98786cb3a93dcc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Set the default CBFS size to cover the whole BIOS region.
Change-Id: If719a9cd2897d933df53bd423e71503b832411fe
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
1. Configure GPIOs as per schematics
2. Add 1 Ports and 1 Endpoints
3. Add support for OTVI5675
WFC is on I2C5 with VCM support and using 2 data-lanes
BUG=None
BRANCH=None
TEST=Build and Boot jslrvp board and able to capture image
using world facing camera.
Change-Id: I07ae9e3473c16bde8eb1597460e70cc478357b98
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Current Interrupt setting use 2nd parameters as device function number.
Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
Reference:
- ACPI spec 6.2.13 _PRT
BUG=None
BRANCH=None
TEST=Build and boot JSLRVP Verify Interrupt mappings are same as PCI
INTR(0x3C) register and no interrupt storm is seen
Change-Id: I21462c6befea310a49eecf9ad1b5c8770eccd5bd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41404
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently coreboot is using the ec hardware id IBM0068 for all
thinkpads, but for newer thinkpads the id maybe LEN0068 or LEN0268.
On Windows, the Lenovo Vantage app can't get battery details when using
IBM0068. This patch config this id by motherboard. The hardware IDs for
the following models can be found by searching for disassembled
dsdt.asl on vendor BIOS:
(But this info is not easy to find online. So I only changed some of
the thinkpads.)
T420:
https://github.com/tluck/Lenovo-T420-Clover/blob/master/EFI/CLOVER/ACPI/1600x900-EDID/DSDT.edid-2e2-hs.dsl
LEN0068
T430:
https://github.com/ThiagoSchetini/macosx-thinkpad-t430/blob/master/vanilla%20ACPI%20dsl's/DSDT.dsl
LEN0068
T520: Confirmed by Patrick Rudolph
LEN0068
W520: Confirmed by Patrick Rudolph
LEN0068
T530: Confirmed by Prasun Gera
LEN0068
W530: https://bugzilla.kernel.org/show_bug.cgi?id=66731
LEN0068
X230/X230T:
https://github.com/tuandzung/ThinkPad-X230-macOS-10.12.x/blob/master/DSDT/DSDT.dsl
LEN0068
T440p: https://github.com/doudou/t440p/blob/master/acpi/2.30/dsdt.dsl
LEN0068
Signed-off-by: Da Lao <dalao@tutanota.com>
Change-Id: I797080ec8ba7ce39d47fe587319f8f32d6938875
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Convert the remaining files in src/drivers to use SPDX identifiers.
int15.h and default_brightness_levels.asl did not have license headers,
but they were both copied from other GPL2 files, so they should be under
the GPL2 as well.
ne2k.c and drm_dp_helper.h are licensed under custom BSD-like licenses
that do not have an SPDX equivalent, so they are added as exceptions
to the license header lint.
Change-Id: I87fb1c637b8d11b0463f7c19f70b847413e14aed
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Also adjust a few comments to follow the style guide.
Change-Id: I22001320f2ce1f0db348e0f7fabc5a65b50ba53e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:153779573
Change-Id: I417ce34f2c302d61cfe94ff478f9022cae16f046
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41629
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iaf848a68dc50c2af1e32b996f09296aaea935459
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41628
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Other files in the tree use such license. I first added this file.
Change-Id: I338654ec022bd6f2fa4a4381a8f27d024605e79d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ifbab50ef42f0fe49dd3949db662b245c63522f2d
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41599
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia05f2ecd31d0606dfe2bca843dbe6df2b8212a27
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41598
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an option for accommodating 64 bit width resource
request with CONFIG_PCI_SEGMENT_GROUPS = 16 refer as PCIEX BAR length 4096MB
(Bus 0-4095).
Change-Id: I9a8448af7e9f26c8e0176e58e4fe253a6e77b69a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40336
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix
*** Pre-CBMEM romstage console overflowed, log truncated! ***
issue.
TEST=Verified on TGL platform.
Change-Id: Iae66b6a1260a9290b35d804487b7a07242c5ebc2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: I468f0d3ab018ee0044e8de7df829c64940c7df2b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The X230, like its larger cousins, has a docking connector. However,
it lacks the "docking_supported" flag in devicetree, so add it.
Change-Id: I188045e4cf9bbb0f2d434b353b84223470c951b9
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41510
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this patch, the ThinkLight on the ThinkPad T400 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T400 to test this.
Change-Id: I377854d6f54c5459e44626a7d7b61c513268183e
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
With this patch, the ThinkLight on the ThinkPad T430S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430S to test this.
Change-Id: Ifa74f5373a6305d1237e7de6da35028e68f1e99c
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
With this patch, the ThinkLight on the ThinkPad T420S can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420S to test this.
Change-Id: I245acf81b34abccf7bcb04126275ab8b154135d5
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
With this patch, the ThinkLight on the ThinkPad T520 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T520 to test this.
Change-Id: Iffc5dd2f23ee4896da633c18cbbf22c9e448edf1
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
With this patch, the ThinkLight on the ThinkPad T530 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T530 to test this.
Change-Id: I94d239b65e6e8546a27f751d569681a4e68a4109
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
With this patch, the ThinkLight on the ThinkPad T430 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T430 to test this.
Change-Id: I1fb1a9d3a84ce12ab9e3f22a699afbfd7cd1688f
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
On PC Engines apu1 there were issues with cold reset. Platform hangs
in boot path after performing reset using CF9h.
CB:10549 (amd/sb800: Make UsbRxMode per-board customizable)
mentions a similar issue, and added a configuration macro for it.
That error is also described in AMD SB800 Family Product Errata,
section 15 USB Resets Asynchronously With Port CF9h Hard Reset.
This workaround simply non-execute USB configuration during boot
and hence no reset via CF9h is done.
TEST=perform multiple cold resets and see if platform boots
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: Ie6cebcfc4b77e121ef44a25fa81377eb5e1f0644
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41627
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this patch, the ThinkLight on the ThinkPad X220 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own an X220 to test this.
Change-Id: Icead793694475e2f63353690203790ab7ce7c597
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40668
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this patch, the ThinkLight on the ThinkPad T420 can be controlled
through the OS. The same change was done for the ThinkPad X200 in
b45912f4: mb/lenovo/x200: Add support for ThinkLight
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Unfortunately I do not own a T420 to test this.
Change-Id: I4f9a9937a45995b72a9712919316e95bb8f82f45
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds a target to the top level Makefile that allows
building sconfig and generating static.c/static.h without building
the rest of coreboot.
It also adds $(DEVICETREE_STATIC_C) to the c-deps for each stage so
the files are generated before the build runs.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4320288422230d8913dfa7cc7b7512775a1a797b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41439
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable drivers for SoundWire codecs and define the topology in
the devicetree for the volteer variant with the SoundWire daughter
board connected.
+------------------+ +-------------------+
| | | Headphone Codec |
| Intel Tigerlake | +--->| Realtek ALC5682 |
| SoundWire | | | ID 1 |
| Controller | | +-------------------+
| | |
| Link 0 +----+ +-------------------+
| | | Left Speaker Amp |
| Link 1 +----+--->| Maxim MAX98373 |
| | | | ID 3 |
| Link 2 | | +-------------------+
| | |
| Link 3 | | +-------------------+
| | | | Right Speaker Amp |
+------------------+ +--->| Maxim MAX98373 |
| ID 7 |
+-------------------+
This was tested by booting the firmware and dumping the SSDT table
to ensure that all SoundWire ACPI devices are created as expected with
the properties that are defined in coreboot under \_SB.PCI0:
HDAS - Intel Tigerlake HDA PCI device
HDAS.SNDW - Intel Tigerlake SoundWire Controller
HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec
HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp
HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of only using the baseboard devicetree add a placeholder
overridetree for volteer and refer to it in Kconfig.
This will allow us to add the volteer specific devices here instead
of at the baseboard level.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a document about the SoundWire implementation in
coreboot with details adding new controllers and codecs and
connecting them in the mainboard devicetree.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibc04442e22acfc03ff86c49c8a7a215ceefc24c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40892
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ALC5682 headset codec can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is supported
- Data Ports 1-4 are supported as both source and sink
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 1:
chip drivers/soundwire/alc5682
register "desc" = ""Headset Codec""
device generic 0.1 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW01)
{
Name (_ADR, 0x000021025D568200)
Name (_DDN, "Headset Codec")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
[...]
}
}
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-bra-flow-controlled", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x000F4240, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I488dcd81d2e66a6f2c269ab7fa9f7ceaf2cbf003
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40891
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MAX98373 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
- Data Port 3 is the 16bit data output for I/V sense ADC path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 1 and has strap
settings configuring it for unique ID 3.
chip drivers/soundwire/max98373
register "desc" = ""Left Speaker Amp""
device generic 1.3 on end
end
This driver was tested with the volteer reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW13)
{
Name (_ADR, 0x000123019F837300)
Name (_DDN, "Left Speaker Amp")
Method (_STA)
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" },
Package () { "mipi-sdw-dp-3-source-subproperties", "SRC3" },
}
}
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00753000, [...] }
},
[...]
}
}
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
Name (SRC3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
}
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I3f8cb2779ddde98c5df739bd8a1e83a12a305c00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Intel Tigerlake SoundWire controller has 4 master links which
are configured differently depending on the external crystal oscillator
which is connected to the PCH.
This function will read the PCH PMC EPOC register to determine the
frequency and then fill out the master link entries with the correct
table values.
The frequency is also provided directly in a custom "ip-clock" property
which will be added to the link descriptor and passed to the OS driver
so it can know the clock rate of the master.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This driver provides support for Intel SoundWire controllers. It is
intended to be used by multiple Intel SoCs and relies on retrieving
controller/master information from the SoC itself. As such it
provides a function that must be implemented by the SoC to fill out
this structure.
The Intel SoundWire driver in the Linux kernel expects firmware to
inform it which master links are unused by adding a custom property
to the link descriptor. This is done by looking for any children
attached to the device that use each link and disabling the ones
that are unused.
Mainboards will enable this driver and define the controller in
devicetree.cb in order provide the required ACPI tables, but the
mainboard should not need to provide any configuration itself as that
should all come from the SoC directly.
This was tested with the volteer board by adding this controller and a
codec to devicetree.cb and ensuring that the properties are all present,
including the custom properties for the device clock and quirk mask for
disabled links.
Device (SNDW)
{
Name (_ADR, 0x40000003)
Name (_CID, Package () { "PRP0001", "PNP0A05" })
Name (_DDN, "Intel SoundWire Controller")
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
Package () { "mipi-sdw-master-count", 0x04 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
Package () { "mipi-sdw-link-0-subproperties", "LNK0" },
Package () { "mipi-sdw-link-1-subproperties", "LNK1" },
Package () { "mipi-sdw-link-2-subproperties", "LNK2" },
Package () { "mipi-sdw-link-3-subproperties", "LNK3" },
}
}
Name (LNK0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () { "mipi-sdw-clock-stop-mode0-supported", One },
[...]
Package () { "intel-sdw-ip-clock", 0x0249F000 },
Package () { "intel-quirk-mask", Zero },
}
}
[...]
}
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I4b4f843a7e5ea170b070a1697c8eedc7c103e127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The PMC EPOC register indicates which external crystal oscillator is
connected to the PCH. This frequency is important for determining the
IP clock of internal PCH devices.
Add definitions that allow this register to be read and extract the
crystal frequency, and a helper function to extract and return this
as the defined enum.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM
part should be set to 0xF.
BUG=b:157178553, b:156555863
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a
SKU4 volteer to the kernel and run "memtester 6G 100" and verify it
completes successfully without error and does not crash.
Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD
contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f).
After fixing that error, I noticed that two generic SPDs could
be collapsed into one, so I removed one of the duplicate generic
SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex),
and changed Makefile to collapse volteer's DRAM ID 2 into ID 0.
BUG=b:156126658, b:156058720
TEST=Flash and boot a ripto to kernel. Also verified that ripto
can boot successfully to the kernel at 4267 MT/sec with FSP built
in debug mode with RMT enabled.
Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.
BUG=b:153456574
TEST=Build and boot dalboz
BRANCH=none
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Had to increase MAX_PSP_ENTRIES to accommodate the 16 APCBs we have
the ability to add.
BUG=b:150862063
TEST=Boot Trembyle
BRANCH=None
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I64eccfa28839768788f53327caf187a564842162
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2090323
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41580
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This node is required so we can add child ACPI nodes.
BUG=b:147042464
TEST=Boot trembyle and confirm Bus A has a firmware node
$ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path
\_SB_.PCI0.PBRA
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is a squash of the following commits. The original values were
wrong, and had confusing naming.
soc/amd/picasso: Get rid of *_DEVID from pci_devs.h
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I203449499840bf0a6df8bd879fb7d2e75a16b284
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153714
src/amd/picasso: Update PCI bridge devices
Orignal-Change-Id: I1fa9d52ce113eacdc5c9ba31ab46b6428a7d6ca9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Zork: Reorganizing ACPI and adding PCI bridge configs
Signed-off-by: Pranay Shoroff <pshoroff@google.com>
Original-Change-Id: I1e2095567525f302dfd0bce8e39001250523180b
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2063536
soc/amd/picasso: Fix soc_acpi_name() to use devfn instead of devid
Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I2486e7e0059e0528f53d5a158c9328636563fe93
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153712
BUG=b:147042464
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I91bf7f9edcddf03027f8fdcaadf4e290ece10df5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This is currently used by trembyle. Add it in a common location so other
boards can use it.
BUG=b:147200751
BRANCH=none
TEST=Able to get ec codec on trembyle
Change-Id: Ie21cd813b0e3129f1c61d2de199532b25d3c70fa
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2000271
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@chromium.org>
Commit-Queue: Martin Roth <martinroth@chromium.org>
Tested-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41575
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was missed in the refactor.
BUG=b:157140753
TEST=Built trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I150e0b8a806042ef8001805eaefbce71dc1be0e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41574
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that we have created the IOSAV API, we can put it to good use.
Drop all the helper macros and replace them with struct constructs.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: Ib366e364df11c9bb240cdfbce418540ec715c634
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41003
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We now use a static variable to handle the sequence length.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: Id3115c14336ea128264bd3945a99c52b9796d115
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Instead of directly writing values to the IOSAV registers, use a struct
and some helper functions to provide a cleaner interface for the IOSAV.
Having IOSAV_SUBSEQUENCE refer to a static function is weird, but we
will remove this macro in a follow-up that does not change the binary.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I73f13c18a739c5586a7415966f9017c2335fdfd1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We set bit 15 of IOSAV_n_SUBSEQ_CTRL three times, but it is reserved.
Since this bitfield is five bits wide, manually truncate the values so
that bit 15 does not get set.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: Ib61b026b016b0d22e164f8817158ec5093f6bb9e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Turn `iosav_run_queue` and `iosav_run_once` into functions. Inlining
them does not have any effect, as the resulting binary is identical.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I7844814eeedad9b1d24f833a77c90902fa926bfe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Turn it into a macro that looks like a function, and add another, more
generic `iosav_run_queue` that covers all current use-cases. They will
be replaced with functions in a follow-up to preserve reproducibility.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I07b260b5fb111c1408ff75316dc0735a9e642ac9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
To replace the register writes with assignments to struct fields, we
would need to have the values as parameters of a single macro. So,
split the raw value of `IOSAV_n_SP_CMD_CTRL_ch` in two parts. Note that
the single command that sets bit 17 is likely wrong, but it will be
fixed after refactoring. For now, we'll treat it as part of `ranksel`.
Move the parameters of `ADDR_UPDATE` into the top-level IOSAV macro.
Hopefully, this will be enough to replace the underlying implementation.
Line length limits are not for review. Breaking the lines unnecessarily
complicates search and replace operations, and wil be taken care of in
subsequent commits.
Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged.
Change-Id: I404edbd5d90ddc2a6993f39f552480d1ef24e153
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change was missed when I ported over fsp_params.c.
BUG=b:157140753
TEST=Boot trembyle to OS
Fixes: 89e51e61781 ("soc/amd/picasso: Allow mainboard to provide pci ddi descriptors")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icdb6aebe5a3be7174170bdf37a1f379f02dcc5a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
New information indicates the PSP expects the APOB NV region
populated for all types of boot, and this is not a feature only
used for S3. Switch over to using the MRC_CACHE flash region.
Remove the Kconfig symbols for the APOB_NV base and size. Override
the MRC_CACHE_SETTINGS_CACHE_SIZE to ensure the default maintains the
minimum required size. Use the generated (or mainboard-specified)
fmap.fmd file as an input for amdfwtool and properly match the
flash region.
Change the original naming for the APOB destination, which matched the
PSP spec's field name, to PSP_APOB_DESTINATION. This should be more
intuitive for a source code reader. The APOB address is the location
in DRAM where the PSP puts its output block.
BUG=b:147042464, b:153675914
TEST=Boot trembyle
Original-Change-Id: Ia5ba8646deec2bd282df930f471738723063eef8
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080375
Original-Change-Id: I972d66f1817f86ff0b689f011c0c44c3fe7c8ef7
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2053312
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I4550766ece462b65a6bfe6f1b747343e08e53fe5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All callers just check for zero/non-zero.
Change-Id: I795763ce882d879d12c97b71e7a0b35423378c36
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I2de16eaa88baace28afa30345b7762353a48ab87
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41558
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
soc/i2c.h gets included indirectly via chip.h and removing the chip.h
in 73716d0e924080ea32274a265a8de04e009c3676 broke the build. chip.h got
added back, but including soc/i2c.h directly fixes the underlying issue.
Change-Id: Ic84f7b6b4447b7c335a51dc604daf8924851e555
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The audio devices are currently set to enable static devices at their
own level, but in order to supported nested SoundWire devices these
drivers must instead use scan_static_bus. Without this change the
device tree code will not look at children of these devices.
After this change the audio device can have nested devices:
device pci 1f.3 on
chip drivers/intel/soundwire
device generic 0 on end
end
end
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ibb716fbd9ffdc45f2c4bbe5e81f420ec2b13483c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adds a help function to write a SoundWire ACPI address
object that conforms to the SoundWire DisCo Specification Version 1.0
The SoundWire address structure is defined in include/device/soundwire.h
and provides the properties that are used to form the _ADR object.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I6efbf52ce20b53f96d69efe2bf004b98dbe06552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40885
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses the previously added SoundWire definitions to provide
functions that generate ACPI Device Properties for SoundWire
controllers and codecs.
A SoundWire controller driver should populate
`struct soundwire_controller` and pass it to
soundwire_gen_controller(). This will add all of the defined master
links provided by the controller.
A SoundWire codec driver should populate the necessary members in
struct soundwire_codec and pass it to soundwire_gen_codec().
Several properties are optional and depend on whether the codec itself
supports certain features and behaviors.
The goal of this interface is to handle all of the properties defined
in the SoundWire Discovery and Configuration Specification Version
1.0 so that controller and codec drivers do not need to all have code
for writing standard properties.
Both of these functions also provide a callback method for adding
custom properties that are not defined by the SoundWire DisCo
Specification. These properties may be required by OS drivers but are
outside of the scope of the SoundWire specification itself.
This code is tested with controller, codec, and mainboard
implementations in subsequent commits.
BUG=b:146482091
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ib185eaacf3c4914087497ed65479a772c155502b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Other variants would be added later.
Change-Id: Ic6af14f0aa7a6f7378048f3c38d5713c18950366
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41509
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 6b95507ec5b087658178a325bdc68570bc48bb20, in order
to recommit and review it again.
Change-Id: Id4ddf99200f77016a48d02a8421d080cea492aae
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41504
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I'm not quite sure what happened when we first added the code for
Trogdor strappings but something clearly seems to be wrong. First of
all, on newer schematics the RAM_ID_1 pin is actually pin 19, not pin
91. It only used to be 91 on rev0. Whether that was an intentional
change or someone just swapped the digits on accident at some point,
we're not quite sure anymore, but it seems to be 19 going forward so
that is what we should be programming. (ram_code wasn't used for
anything on Trogdor rev0 so we don't care about adding
backwards-compatibility for that.)
The sku_id pins are also somewhat out of whack: first of all, a new
SKU_ID_2 pin was added for rev1 that wasn't there on rev0. Second,
SKU_ID_0 is not GPIO_114. In fact, it has never been GPIO_114. I have no
idea how that number got there. Anyway, fix it. (Like with the ram_code,
SKU IDs were also not used for rev0 so we won't make this
backwards-compatible.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia14ec74ec2f16ce2661f89d0d597a5477297ab69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
|
|
Some Librem 13v4's don't have the presence straps connected,
leading libgfxinit to fail to init the internal display.
Select GFX_GMA_IGNORE_PRESENCE_STRAPS since all SKL/KBL Librems
have an internal display so there's no adverse effect.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: Ib9d281b7d495c4f9a5c6fc5fdb8042b0fcbda745
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41417
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A handful of boards do not properly implement the presence straps,
leading libgfxinit to fail to detect an attached display. Add an
override, defaulting to N, which can be set for affected boards.
Add a section to the documentation detailing the option and its usage.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I43c61d67147878887658b23d90fb1c0b91e7a2af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update libgfxinit submodule pointer to pull in handling for
presence straps bypass and some minor cleanup.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: Id4a903383f32f352aa3595bd72bc5f6f0777171c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7a78e16512369cbaada4399dbb855ade358ff046
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
The devicetree declares the chrontel interrupt as GpioInt so the GPIO
needs to be configured as such instead of routing directly to APIC.
Also update the compatible string to conform to kernel standards.
BUG=b:146576073
TEST=install ch7322 driver; send commands using cec-ctl and verify
that the interrupt handler is called.
Change-Id: I737d951db135c53deb0f3cb956f0d0f275082251
Signed-off-by: Jeff Chase <jnchase@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Enable DPTF functionality for volteer platform
BRANCH=None
BUG=b:149722146
TEST=Built and tested on volteer system
Change-Id: I385fb409ccd291d97369295ff99f21c9430880f9
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41427
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI device names for TCSS devices which were not already defined
which match those declared in the DSDT at acpi/tcss.asl.
Change-Id: I6a79da7dd78c73345986c12d6ffe467cd4322e05
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CA vref should alway select range[1]. But in fast calibration flow,
we missed the range selection and caused the CA vref to use the range[0] value.
The DQ vref should select correct range that corresponds to current frequency,
that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps
to select range[0].
Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf',
used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels.
MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%,
MR14 range[0] and range[1] values same as MR12.
BUG=b:153614919
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support MMIO mapped BOCHS interface supported since qemu 3.0.
This allows to use multiple virtual GPUs by specifying:
qemu -device bochs-display -device bochs-display ...
Tested on qemu. std, qxl, vmware and multiple bochs displays are working fine.
Change-Id: Ib0eba4815942625ce4859946efccca500301bb65
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Himanshu Sahdev <sahdev.himan@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
pmc.c was included in the SMM object, but only needed the one function,
pmc_soc_set_afterg3_en. pmutil.c was already doing power management-
related functionality, and was included in SMM, so moving
pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the
SMM build.
Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Historically in coreboot, the PMC's fixed PCI resources were described
by the System Agent (the MMIO resource), and eSPI/LPC (the I/O
resource). This patch moves both of those to a new Intel SoC-specific
function, soc_pmc_read_resources(). On TGL, this new function takes care
of providing the MMIO and I/O resources for the PMC.
BUG=b:156388055
TEST=verified on volteer that the resource allocator is aware of and
does not touch these two resources:
("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0
flags f0000200 index 0
PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff
flags c0000100 index 1")
Also verify that the MEM resource is described in the coreboot table:
("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved")
Verified the memory range is also untouchable from Linux:
("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved")
Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On some SoCs, there are PCI devices that may get hidden from PCI
enumeration by platform firmware. Because the Vendor ID reads back as
0xffffffff, it appears that there is no PCI device located at that BDF.
However, because the device does exist, designers may wish to hang its
PCI resources off of a real __pci_driver, as well as have it participate
in ACPI table generation.
This patch extends the semantics of the 'hidden' keyword in
devicetree.cb. If a device now uses 'hidden' instead of 'on', then it
will be assumed during PCI enumeration that the device indeed does
exist, and it will not be removed as a "leftover device." This allows
child devices to be enumerated correctly and also PCI resources can be
designated from the {read,set}_resources callbacks.
It should be noted that as of this commit, there are precisely 0 devices
using 'hidden' in their devicetree.cb files, so this should be a safe
thing to do.
Later patches will begin moving PCI resources from random places (typically
hung off of fixed SA and LPC) into the PMC device (procedure will vary per-
platform).
Change-Id: I16c2d3e1d1433343e63dfc16856cff69cd815e2a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Link frequency and a format was not correct for volteer proto 2
ov2740 user-facing camera.
The link frequency is calculated in the following way.
(max frame width * max frame height * max fps * data format in bps
/ number of lanes / data rate) + max 35% of overhead
For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz.
360Mhz after adding 18% of overhead.
BUG=b:148428976
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check user-facing camera functionalities.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update processor power limit configuration parameters based on
common code base support for Intel Tigerlake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on volteer system
Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused processor power limit configuration parameter
and function call based on common code base support for
Intel Icelake SoC based platform.
BRANCH=None
BUG=None
TEST=Built for icelake based dragonegg board.
Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Volteer port 0 (MB PORT) does not have a retimer so the port needs
to be configured for the SOC to handle Aux orientation flipping. This
requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0)
and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can
control the orientation
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
In order for the SOC to be able to control the Aux line orientation for
Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs
to be configurable through devicetree to correctly set the GPIO pins that
the SOC should use to flip orientation.
BUG=b:145220205
BRANCH=NONE
TEST=booted Volteer proto 2 and verified that the AUX channels flip
when the cable is flipped
Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables EC software sync in romstage.
BUG=b:148259137
TEST=verified EC is updated in romstage using coreboot serial console
logs.
Change-Id: Ibb97c1d57220f7fd74131a5aee450b1ab4b1c982
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41078
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Deltaur uses CNVi WLAN module, this setting is not required.
BUG=none
TEST=WiFi is functional in OS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idb23e271074c8d1e111c559695d4169af5e0d3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add tcss.asl to support TCSS power management.
For the detail please refer cb:39785.
BUG=none
TEST=Check TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3
/sys/bus/pci/devices/bus:device:func/power suspend and
active time can increase.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I432f3d6643de13b08c07e47f799c0ecdfe047de6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41506
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method acpi method GPID to return the GPIO PCR port ID.
This method is further planned to be used for GPIO power
management configuration.
TEST=Build waddledoo board
Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove hardcoded gpio community range, since it might differ across
the SOCs.
Change-Id: I79c10669f6096537d466d1abd356d58a50fcb8f5
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Fix coreboot build error with adding this driver
BUG=b:149443429
BRANCH=None
TEST=built without errors
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I2d76ec72ca6ae9ac54ab05f15ea92beb645acd5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add low power idle table to notify EC system is entering s0ix.
BUG=none
TEST=Power button and keyboard backlight are off when suspending.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icf4dffe2bd289c15854bbad914c3b34b307254ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41494
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By undefining the configuration after use we're sure that nobody else
comes to depend on it without us noticing.
Change-Id: I7c5cfd58be643d6431989fc69cf3b397920590b9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The resource allocator woes post-4.12 release showed room for
improvement on both discussion and documentation. To encourage this
(and encourage reviewers to look out for issues in that space),
extend the review guidelines so that they encourage to more clearly
document the reason for a change with the change (commit message or
our documentation) and also to loop in the mailing list.
Change-Id: I1962dba3fe7e1a01fa4c8b0058297c7d050cb7b7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
