| Age | Commit message (Collapse) | Author |
|---|
|
Replace `Store("...", Debug)` with `Printf("...")`.
Built roda/rw11 with `BUILD_TIMELESS=1` and coreboot.rom remains the
same.
Change-Id: Ie1a1f7320ef2850e4f861b1426240e6940036844
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The GPE offset of 16 is PCH specific.
Built roda/rw11 with `BUILD_TIMELESS=1` and coreboot.rom remains the
same.
Change-Id: I4ec38fc28d2436f84a090bb4ab38f20612cfd795
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add wifi sar for magister.
Due to fw-config cannot distinguish between magolor and magister.
Using sku_id to decide to load magister custom wifi sar.
BUG=b:192290227
TEST=build and test on magolor/magister
Cq-Depend: chrome-internal:3986580
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4510cc2ad42a11ec802ecd439b353f8e87d63868
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This dev tree config controls the Vnn/Vcc1P05 bypass mode for Jasperlake.
BUG=b:191691430
BRANCH=dedede
TEST=Build fw and confirm FSP setting are set properly by log
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Change-Id: I10bc203d3fed32ab65f325978426b7d0fca6f392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch adds device tree settings to control pcie modphy tuning
FSP UPDs. With this patch, the pcie modphy can be tuned per board.
BUG=b:192716633
BRANCH=NONE
TEST=build dedede variant coreboot with fw_debug enable and check if
these settings have been changed successfully on fsp debug log.
Change-Id: I80a91d45f9dd8ef218846e1284fdad309313e831
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
to 0ms
LTE module L850-GL may encounter U3 wakeup race condition with the host.
Setting xHCI LFPS periodic sampling off time to 0ms so that the host would not
miss the device-initiated U3 wakeup thus avoid the race condition.
BUG=b:191426542
BRANCH=dedede
TEST=flash the image to the device. Run following command to check the bits[7:4] is 0x0:
iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I3be7adad49f87956a6764ad91fec6e76681b393f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Chiasheng Lee <chiasheng.lee@intel.com>
|
|
Update Passive Policy and TCHG parameters.
BUG=b:188936764
TEST=emerge-volteer coreboot chromeos-bootimage
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Id75bfa74ba353f2342c95bcf8d73cd83c957deb5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56512
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This symbol is only used in generating a default fmap.
Change-Id: I8d92eba9978cdad5795b0f5755e1d75db7b3cb2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable the impedance tracking for channel 2 and channel 3.
The impedance tracking can compensate the settings of impedance
when the temperature changes.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: I047ab70bb59736a8ba8ae75ab15659900c784342
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56620
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the specification isn't very clear on this, add a comment about
the optional raw data part of a acpi_generic_error_status block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6df7d2f216fe0515e89d08c8ed01f06d19461429
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since current AMD SoCs don't need some wait time between INIT and SIPI,
we can skip the 10ms wait there, which improves the boot time a bit.
before: CPU_CLUSTER: 0 init finished in 632 msecs
after: CPU_CLUSTER: 0 init finished in 619 msecs
mpinit still works on Mandolin and all CPU cores show up and are usable.
This also doesn't change the binary in a timeless build for boards/SoCs
that don't select X86_AMD_INIT_SIPI which I verified for lenovo/x230.
BUG=b:193885336
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1e044776f45021742a88a5e369a74383c1baaab6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The biosram accessor support in soc/amd/common/block/acpimmio/biosram.c
is only used on Stoneyridge and the old amd/southbridge code and not on
Picasso or Cezanne. It also only builds as a 32 bit binary and breaks
when trying to build as a 64 bit binary, since the size of an uintptr_t
is different on those two. There is no support for using the 32 bit
binaryPI with a 64 bit coreboot while there is code to use a 32 bit FSP
with 64 bit coreboot, so not building this for FSP-based SoC support
moves us one step closer to be able to build coreboot as 64 bit binary
for Picasso and Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d87ec2fa1b217eaf55d865e4390308812502e56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of
doing so on each and every mainboard.
Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing
so on each and every mainboard.
Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once
instead of doing so on each and every mainboard.
Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the type of the `DEVICETREE` Kconfig symbol once instead of
doing so on each and every mainboard.
Change-Id: If68f11a5ceaa67a3e8218f89e1138c247ebb9a25
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56555
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once
instead of doing so on each and every mainboard.
Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of
doing so on each and every mainboard.
Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol
more than once. This is done in `src/Kconfig`, along with its prompt.
Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove redundant type, prompt and help text, and replace `depends on`
clause with conditional default to allow specifying a FMAP when vboot
is not selected.
Change-Id: I37ddab3a27e304e810ea55f13821d755bb70cb4b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56551
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6fac40918f1ca3227ff68e79fcae039a26356d0d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56550
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to an issue in sconfig, move `chipset_lockdown` out of
`common_soc_config` and configure it separately in the baseboard's
devicetree since it might get overwritten if a variant configures
`common_soc_config`.
Also, deduplicate the configuration of `chipset_lockdown`.
Change-Id: Id969346df06aa82ab2ad2b1aa4884a9bcd876d75
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56408
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, internal flashing is not possible due to FSP lockdown. Thus
let coreboot do chipset lockdown on all variants.
Change-Id: Ib25a0543bfee0889dce071f3b01725daabd0a0eb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56407
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add tests for src/lib/libgcc.c __clzsi2() implementation. Unlike GCC
implementation, coreboot one can handle zero input.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I3f46071d0921e8c5edc5df3c296d11c77de01c88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This change does the following:
* Pushes the cpu_info struct into the top of the stack (just like
c_start.S). This is required so the cpu_info function works correctly.
* Adds the thread.c to the romstage build.
I only enabled this for romstage since I haven't done any tests in other
stages, but in theory it should work for other stages.
BUG=b:179699789
TEST=Boot guybrush with threads enabled in romstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8e32e1c54dea0d0c85dd6d6753147099aa54b9b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The alignment for `struct cpu_info` is wrong on x86_64. c_start.S uses
the `push` instruction when setting up the cpu_info struct. This
instruction will push 8 bytes but `unsigned int` is 4 bytes. By making
it a `size_t` we get the correct size for both x86_32 and x86_64.
BUG=b:179699789
TEST=Boot guybrush to the OS
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8ef311aaa8333ccf8a5b3f1f0e852bb26777671c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The structure and function are not currently used or implemented. x86 is
the only arch that currently implements it. It is currently used for
COOP_MULTITASKING and mp_init.
Keeping around the unused definitions leads to confusion.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0775ef03168f7f9c41b1b05cb8f12724d0458ba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
By lazy initializing the threads, if a stage doesn't use them, they will
be garbage collected.
BUG=b:179699789
TEST=Boot guybrush to the OS and verify threads worked
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7208ffb5dcda63d916bc6cfdea28d92a62435da6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56532
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no reason this needs to be done in asm. It also allows
different stages to use threads. If threads are no used in a specific
stage, the compiler will garbage collect the space.
BUG=b:179699789
TEST=Boot guybrush to the OS
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib5a84a62fdc75db8ef0358ae16ff69c20cbafd5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56531
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It can be nice to update the TPM firmware without having to clear the
TPM owner. However, in order to do so would require platformHierarchy
to be enabled which would leave the kernel antirollback space a bit
vulnerable. To protect the kernel antirollback space from being written
to by the OS, we can use the WriteLock command. In order to do so we
need to add the WRITE_STCLEAR TPM attribute.
This commit adds the WRITE_STCLEAR TPM attribute to the rw antirollback
spaces. This includes the kernel antirollback space along with the MRC
space. When an STCLEAR attribute is set, this indicates that the TPM
object will need to be reloaded after any TPM Startup (CLEAR).
BUG=b:186029006
BRANCH=None
TEST=Build and flash a chromebook with no kernel antirollback space set
up, boot to Chrome OS, run `tpm_manager_client get_space_info
--index=0x1007` and verify that the WRITE_STCLEAR attribute is present.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I3181b4c18acd908e924ad858b677e891312423fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56358
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Realtek speaker amplifiers under auto mode operation have Absolute Max
Rating (AMR) at 1.98 V. Hence probe the firmware config for speaker
amplifier and program the VCCIOSEL accordingly.
BUG=b:194120188
TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is
configured as expected and probing the GPIO reads the configured
voltage.
Change-Id: Ifa0b272c23bc70d9b0b23f9cc9222d875cd24921
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Jasperlake is one of the few SoCs that support programmable VCCIO
selection and this support is used by Dedede mainboard.
BUG=b:194120188
TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is
configured as expected and probing the GPIO reads the configured
voltage.
Change-Id: I54def27a499ccba7fd25cab1048fdca06dbc535f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56536
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the Intel SoCs with more than 2 PAD configuration registers
support programming VCCIO selection. Add a pad configuration macro to
program VCCIO selection when the GPIO is an output pin.
BUG=b:194120188
TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is
configured as expected and probing the GPIO reads the configured
voltage.
Change-Id: Icda33b3cc84f42ab87ca174b1fe12a5fa2184061
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56507
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds fine-tuned USB2 PHY parameters for pirika.
BUG=192601233
TEST=Built and verified USB2 eye diagram test result
Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com>
Change-Id: Icf9fb41cd0ae40728e4ec5bd72a15ec3c45c963b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Verstage even fits in 44K so one can comfortably increase the
bootblock size. This is need for the followup patches that turn
console methods into drivers, which increase the bootblock a little,
but still too much for the the bootblock to fit in the alloted size on
this platform.
Change-Id: If1eaf2b495e3032d156433fd0728134a66f4e49b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56521
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory 'K4U6E3S4AA-MGCR' for cappy2
BUG=None
TEST=Build the cappy2 board.
Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com>
Change-Id: Ie76a4dca607bb2c3261bbe5478209a43e8430591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Taken from Asus P5QPL-AM.
Change-Id: If26e98eba5d762d99991bfc06cad1b84e1f430e3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56562
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide an option to set xHCI LFPS period sampling off time
(SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0).
If the option is set in the devicetree, the bits[7:4] in
xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated.
The host will sample LFPS for U3 wake-up detection when suspended, but
it doesn't sample LFPS at all time due to power management, the
default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS
period sampling off time is not 0ms, the host may miss the
device-initiated U3 wake-up and causes some kind of race condition for
U3 wake-up between the host and the device.
BUG=b:187801363, b:191426542
TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash
the image to the device. Run following command to check the bits[7:4]:
iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Ben Kao <ben.kao@intel.com>
Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch moves the common config to the Kconfig under
BOARD_GOOGLE_BASEBOARD_BRYA and removes the redundant config.
BUG=b:191472401
BRANCH=None
TEST=build pass
Change-Id: Ie59299dfaba6bb23758d4a4c22a6dbbb4ba6520e
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56387
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, BT offload is disabled/enabled unconditionally based on the
devicetree settings. BT offload uses I2S lines and cannot be enabled
when a I2S based audio daughter card is active. So we need to enable
BT offload only while using soundwire based audio daugther card.
BUG=b:175701262
TEST=Verified BT offload on brya with soundwire audio daughter card
BT offload enabled
Change-Id: I6a9ad463e13e2cfcfc3b7de5a61a25cdef0641f7
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Log the GPE and PM1 wake events into the event log using the SMI handler
platform callback.
BUG=b:186792595, b:186800045
TEST=Build and boot to OS in Guybrush. Ensure that the wake sources are
logged into the event logs.
5 | 2021-07-15 16:26:43 | S0ix Enter
6 | 2021-07-15 16:26:49 | S0ix Exit
7 | 2021-07-15 16:26:49 | Wake Source | GPE # | 22 <- Trackpad
8 | 2021-07-15 16:27:07 | S0ix Enter
9 | 2021-07-15 16:27:13 | S0ix Exit
10 | 2021-07-15 16:27:13 | Wake Source | RTC Alarm | 0
25 | 2021-07-15 16:38:13 | S0ix Enter
26 | 2021-07-15 16:38:17 | S0ix Exit
27 | 2021-07-15 16:38:17 | Wake Source | GPE # | 5 <- Fingerprint
Change-Id: Icec6fc03f4871cc46b32886575a7054bc289f4bf
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move the event logging helpers defined in acpi into a separate library.
This will allow logging power management and GPE events for both S3 and
Modern Standby. Introduce a single helper acpi_log_events function to
log both PM and GPE events.
BUG=None
TEST=Build and boot to OS in Guybrush.
Change-Id: I96df66edfc824eb3db108098a560d33d758f55ba
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
`cpu_info()` requires that stacks be STACK_SIZE aligned and a power of 2.
BUG=b:179699789
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I615623f05bfbe2861dcefe5cae66899aec306ba2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
thread_run_until is a ramstage specific API. This change guards the API
by checking ENV_RAMSTAGE.
BUG=b:179699789
TEST=Boot guybrush to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4784942070fd352a48c349f3b65f5a299abf2800
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56529
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0ffae7408f11f4f517204a0a670845c11b3601a8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56549
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I16c41031718e1c3e41d0a128c8b254e2f6f94093
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
TEST=Checked on amd/mandolin with PCO APU and google/guybrush with CZN
APU that the McaXEnable bit is set in the CONFIG registers of all used
MCAX banks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia4515ba529e758f910d1d135cdce819f83ea0b5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It appears the pspp_policy enum is not the same as the FSP definition
currently being used. This means that the incorrect PSPP value setting
would get read by FSP. For Zork programs this meant we actually were
setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE.
This change adds DXIO_PSPP_DISABLED as the first enum value to properly
match the FSP definition and adjusts non AMD Customer Reference Boards
that reference the enum to still send the same value even though it has
now change definitions. If we actually want DXIO_PSPP_POWERSAVE for
those boards that can be adjusted in a future change.
BUG=b:193495634
TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi
with other server on local network.
Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
- The WWAN card was being disabled later than desired.
- The SD card was never being placed into reset on BoardID 1.
- Enable Touchscreen power
- Enable PCIe_RST1 at the same points as PCIe_RST
- Remove Redundant Bootblock settings
BUG=b:193036827
TEST=Build & Boot, look at GPIO states through boot process
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I5431da755d98e4ad0b300d01cac562d61db0bc08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This is in preparation for migrating EDK2 to more recent version(s). In
EDK2 repo commit f2cdb268ef appended an additional field to FSP 2.0
header (FspMultiPhaseSiInitEntryOffset). This increases the length of
the header from 72 to 76. Instead of checking for exact length check
reported header length against known minimum length for a given FSP
version.
BUG=b:180186886
TEST=build/boot with both header flavors
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Change-Id: Ie8422447b2cff0a6c536e13014905ffa15c70586
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56190
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change is to maintain parity with other macro declarations.
Change-Id: I67bf78884adf6bd7faa5bb3afa2c17262c89b770
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56559
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I025c20cbcfcfafddbd72b18bca36165b98db8220
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56548
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update comment section to add space before comment delimiter to
follow coding style.
Change-Id: I883aeaa9839fa96fd7baf0c771b394409b18ddca
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56547
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that cpucp blobs have landed, need to uprev the qc_blobs.
Change-Id: I62dc410cee7baf5efa5c0406f35ee05a535f49b1
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49a27eb084b59db455153dd662d564a95940a0ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Stoneyridge has an integrated FCH and no south bridge, so change the sb
prefix to fch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5154ae1158f864d4a2aca55e6bcce6a742c6afe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56527
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso has an integrated FCH and no south bridge, so change the sb
prefix to fch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I82aed68104ea9570827646c818e100bd7e04d1af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56526
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
sb_clk_output_48Mhz is only used in fch.c where it is also implemented,
so no need to have it visible outside of that compilation unit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2b0d10ff26bdf54ea791aa66bf400578466d54cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56525
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Getting boardid information for the different SKU variants
BUG=b:182963902, b:193807794
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I2b7625f9b98563438d1ac20e6f29411ef1058cf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
New binutils versions automatically resolve references to debug symbol
files and parse their content as well when objdump'ing data. This leads
to multiple mentions of symbols, so deduplicate references.
Change-Id: I5d597399c515904313ba36d7aab9178bc0dade14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Provide a valid GPIO configuration based on the mainboard wiring.
Change-Id: I36f0e8292a405b4bac74fbc5fde62e5e414387e7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56519
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there is no SD card interface on this mainboard do not set the
card detect GPIO.
Change-Id: Ibe6799c5c540538f97d1726ec16e79f3edbb16fd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56489
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE instead of
PCI_ALLOW_BUS_MASTER to enable PCIe bus master bit as requested in
CB:56441 during review.
Change-Id: I433dbae0d9b15e41d1d0750298868341ce3d6b46
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Set the bus master bit only if the global Kconfig switch
PCI_ALLOW_BUS_MASTER_ANY_DEVICE is enabled. For now the bus master bit
is needed for i210 because of some old OS drivers that do not set it
and won't work properly without it.
Change-Id: I6f727e7f513f4320740fbf49e741cea86edb3247
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a new configuration option with more density for
8GB variants of the up squared board.
Settings are taken from slimbootloader.
Signed-off-by: Florian Laufenböck <florian@laufenbock.de>
Change-Id: I217b04be94e913b75e2bac0a4ae1c43f2411a044
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This legacy alt-century byte sits amidst CMOS and conflicts many option
tables. It usually has no meaning to the hardware and needs to be main-
tained manually. Let's disable its usage by default if the CMOS option
table is enabled.
Change-Id: Ifba3d77120c2474393ac5e64faac1baeeb58c893
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Chrome EC is relatively quick with retiring "old" boards from their
tree so when upreving it, the last veyron in that list that wasn't
commented out is gone as well.
Change-Id: Ie1ef693c8d0947396ee01e5aa5f40ef36c8a317a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56430
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When accessing I2C, we should use the official names (I2Cx)
instead of magic numbers.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I17cc4c87f5ad26deeb5e529d1c106b697a53591b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56504
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EC_IN_RW_OD signal is routed from Google Security Chip to GPIO_91 in the
upcoming hardware build. The existing SD_EX_PRSNT signal is dropped in
the upcoming hardware build because SD7 support is dropped. Export the
EC_IN_RW GPIO for use by payload.
BUG=None
TEST=Build and boot to OS in Guybrush. Ensure that the device can boot
successfully in both recovery and normal mode.
Cq-Depend: chromium:3043702
Change-Id: I8986ba007a2d899c510be61664d90430b8d2d384
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56493
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update proper number of sectors info for winbond W25Q512NW-IM chip
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: I12a22321bb9180e32cd47faa6ac3960ba5b2dfb8
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56038
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since this mainboard does not use GSPI at all, disable all GSPI ports.
Change-Id: I60254e9f4047537d86c972151ec9e33552332959
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This mainboard uses I2C1 and I2C4 buses only. Disable all the others as
they are not connected at all.
Change-Id: I4743f6ea6b9a9987ad63b60f56ee9a597a08284b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Features like DevSLP and Aggressive Link Power Management are not
supported on this mainboard and are therefore disabled.
Change-Id: I3bc650ea78be8587889fb7abfe7075cd9a122198
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
While the gcc(1) driver has the `-nostartfiles` option, ld(1), the
program the coreboot toolchain uses to link the object files, doesn't
have it.
In binutils before 2.36, this option is interpreted as `-n -o
startfiles`, in which the `-o` option is overridden by a later `-o`
option, so only the `-n` option has effect, which is the `--nmagic`
long option of ld(1). So the correct linker option in this place is
`--nmagic`.
It is tested that without `--nmagic`, ld can generate a much bigger
x86_64 romstage, so this option is still needed.
This error is found when trying to update binutils to 2.36 and later
versions, where ld(1) is unable to disambiguate options and reports an
error.
Change-Id: I27dc2209abdc6fec866716a252736c5cf236a347
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add wifi sar for cret.
BUG=b:194163601
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Ic2f3dbc5822c1f4b1c935c87295ba9916e0e359e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This board does not use CLKREQ-signaling for PCIe, so disable the pin
assignments. In addition only three clock outputs are used for PCIe,
therefore disable all others to improve EMI.
Change-Id: I545f890fa55a109df7f44d2c82170874fb769009
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56455
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are in total three USB ports that are used on mc_ehl1:
- Port 1: Type A connector connected to USB2/USB3 port 0
- Port 2: Type A connector connected to USB2/USB3 port 1
- Onboard: connected to USB2 port 2
None of the ports supports overcurrent reporting.
Adjust the appropriate UPDs in devicetree to match the hardware
configuration.
Change-Id: I220637b8e9f03efccacd0955e82cfc0c7a6f53ee
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56454
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mc_ehl1 does not have a display attached nor have a display
connector available (pure headless design), remove display related
settings from the devicetree.
Change-Id: Id31c09fcfba15f55eed19134bd0c2fb887bd2478
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56453
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update initial gpio configuration for redrix
BUG=b:192052098
TEST=FW_NAME=redrix emerge-brya coreboot
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I2294fb3bdba832677038cfe24b5014014c7f03e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56428
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: Ic6c70f917a59e233f6ea518d9c39f73fe84991c3
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47284
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without this configuration, even though there is no SD card it shows as
SD card is present and host controller waits for card to respond.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board with SD card and
without SD card, make sure if SD card not present then host controller
should not wait for card to respond.
Change-Id: I5dc5ba10c98d606d98e7d4f4c41c3e4f45e94452
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The common gpio driver can be re-used for SC7180,
thus remove the existing gpio driver support and
also clean up the common macro definitions.
Add GPIO pin details specific to SC7180 chipset
for the consumers to be able to request for the
gpio functionality as per their requirement.
TEST=Validated on qualcomm sc7180 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Ifd206e6bc9a549706e7a2c4bde0b7d5527ca6268
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This enables the MCAX checking and BERT entry generation for Cezanne.
TEST=When printing all registers of all MCAX banks of core 0 on a
google/guybrush device, the registers have values that look correctly
and there is no general protection fault, so all MCAX MSRs that could be
accessed exist on Cezanne.
BUG=b:192997706
Change-Id: Ibe8047ce5bb5e7136a8786693bcced4d2225b1fd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56345
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Move M2_SSD_PLN_L to GPP_D3 for power loss notify function.
2. Set GPP_E21 as NC to remove LCLW_DET function
BUG=b:190643562
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: Id3c60adeb5d35c79a1c700937f93a80ad3587c5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56420
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable RSA and SHA for cezanne since support has been added to the PSP.
Also picasso and cezanne have different enums definitions for
hash algorithm, so split that out into chipset.c.
BUG=b:187906425
TEST=boot guybrush, check cbmem -t and the logs
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I725b0cac801ac0429f362a83aa58a8b9de158550
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This allows keeping track of how long it takes to load the microcode.
BUG=b:179699789
TEST=Boot guybrush
112:started reading uCode 990,448 (10,615)
113:finished reading uCode 991,722 (1,274)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I86b67cf9d17786a380e90130a8fe424734e64657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the gpio offset macro instead of a constant value.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Ia9e4b9ca7216092665f0a06ce467da01963c2364
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Program unused Cnvi BT UART GPIOs as NC since we are using
Bluetooth over USB mode for Brya.
Change-Id: I33a37ceb8a91603d2a193de5bdd1b6885eb3c319
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55317
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the taeko variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:193685558
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TAEKO
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: If738849bc3103c52a4c4d8a8aaef3f90a62ad5c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56385
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
K4U6E3S4AA-MGCR
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:A and K4U6E3S4AA-MGCR.
BUG=b:191574298
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I4bfc18fd42c6ff2675e6f836c2ecc9617fac3aff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56329
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Take Kconfig switch PCI_ALLOW_BUS_MASTER into account and set the PCI
bus master bit for legacy devices only if it is allowed.
Change-Id: I7798a767d528419bb093f301140ab68cc8b9c5ae
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch adds support for variant specific soc chip config update
function.
Change-Id: Ic3a3ae0b409433e6dfa102c5e7a6322d4f78f730
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch makes Ampton EC wake up AP from s0ix when the state of
charge drops to 2%.
Demonstrated as follows:
1. Boot Ampton.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 2.
4. System resumes.
BUG=b:189540432
BRANCH=Octopus
TEST=Verified on Ampton.
Change-Id: I98d8e6ea185e8782ad675d4668678b341ca5d350
Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56341
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dependency file, generated by
$(HOSTCC) ... -MMD -MT $@ -c $< -o $@.orig
is determined by replacing the suffix of "$@.orig" with ".d", resulting
in "$@.d" (which is *.o.d). The file name was accidentally changed in
CB:55360. Now explicitly specify the path by the "-MF" option.
BUG=none
TEST=make unit-tests; find build/tests/ -name "*.d"
BRANCH=none
Change-Id: I01f77ebaaae78dd9e69394a49e524f1013857195
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
This change adds mem_parts_uesd.txt that contains the new
memory parts used by primus and Makefile.inc generated by
gen_part_id.go using mem_parts_used.txt.
BUG=b:193813079
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I6aa37114f3a164a4f3c35dfc9b43e1106b825bff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:186264627
BRANCH=none
TEST=build herobrine
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: Id3faf7af64c0129ec646a01085adc43b561225d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
As part of GPIO driver cleanup across qcom chipsets,
GPIO_OUTPUT_ENABLE has been renamed to GPIO_OUTPUT.
BUG=b:182963902
TEST=Validated on qualcomm sc7180 development board
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Change-Id: I51eedc722a91c5ea8e009fb8468a60667d374b49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Defining a macro for the gpio offset instead of a constant value.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Iefdde8f8331cf1df2e88a2c8915aefb4fa091d65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
For new MT8195 devices we will control mt6360 via EC,
so we have to add ec function of controlling MT6360 and
add CONFIG to separate them.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic2228f5b45173f0905ea66a3a1f00ec820e0f855
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=boot kernel from sd card pass on Cherry board.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic20a2f3f053130ded202cf5ec861450f0f18eed0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56437
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
