| Age | Commit message (Collapse) | Author |
|---|
|
Because PLATFORM_USES_FSP2_X86_32 default to false when
PLATFORM_USES_FSP1_1, efi_datatype.h wrongly defines EFI as
__attribute__((__ms_abi__)).
TEST=When some code involved in the build of a platform using
FSP 1.1 such as Google/CYAN includes efi_datatype.h, it does
not hit the following error: '__ms_abi__' calling convention
is not supported for this target
Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d5d
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84402
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I08881e3fb25abca8c34a04b3bea6534c0dbf391a
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84424
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The generated static.c file output by sconfig is currently added as a
prerequisite for all objects to ensure that static.h exists before
compiling anything that might need it. However, this forces every single
object out of date when the compiled devicetree is updated, even though
not every file actually needs static.h.
Only static.h actually needs to exist before compilation of other
objects, since static.c is an independent compilation unit that doesn't
need to exist before other objects can be built. Thus, change the
prerequisite from static.c to static.h, and add a rule for static.h that
depends on static.c. The recipe is a simple `true` since sconfig
generates static.c and static.h at the same time. To prevent unnecessary
recompiles, make static.h an order-only prerequisite [1] using the new
generated files argument for create_cc_template to ensure that the
header exists before any object might need it, but without forcing a
recompile of all objects by default whenever it is updated.
On a clean build, all objects will be compiled since they do not exist,
and these will occur after static.h is generated due to the default
order-only prerequisite. On subsequent incremental compiles, sources
that do need static.h will be appropriately marked out of date due to
the generated .d dependency files from the compiler, which list static.h
as a normal prerequisite for each objects that do include it, which
overrides the default order-only prerequisite. The dependency files
generated for all other objects will not include static.h, and thus the
objects will not be updated since the default order-only dependency does
not force them out of date.
After updating the devicetree of qemu-i440fx after a clean build,
comparing the build log with `make --debug=why` with the generated
dependency files indicates that only objects that actually depend on
static.h were rebuilt, instead of every object. Running a timeless
incremental build after making a change in the devicetree yielded
identical roms when performed with this patch and main, with the only
difference being the number of objects that needed to be rebuilt. Also
tested with the E6430.
[1] https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
Change-Id: I34efc162760ae703285f3982fa16cc23a86b37f6
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84387
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generated files such as static.h are currently added as prerequisites
for all compilation units to ensure that they exist and are up to date
before anything that might need them is compiled. However, this has the
side effect of forcing every compilation unit out of date when such
files are regenerated, even if the object has no dependency on the
generated file. GNU Make has order-only prerequisites [1] which are used
to define prerequisites that must be updated before a given target, but
which don't force the target out of date.
Add a new argument to create_cc_template, similar to the "additional
dependencies" argument, which allows dependencies on such generated
files for a specified object class and source suffix to be defined. This
new functionality will be utilized in subsequent commits to fix up the
dependencies on generated files.
Objects that do depend on generated headers will still be handled
correctly due to the .d dependency files that are generated by the
compiler during the build, which declare normal prerequisites to any
headers an object directly or indirectly includes. As per the GNU Make
documentation, normal prerequisites take precedence over order-only
prerequisites, so the header dependencies declared in the .d files will
override the order-only one declared through create_cc_template.
This does mean that a necessary rebuild of an object due to a generated
file may be missed if the dependency file from the compiler is missing,
but this is an unusual situation that is unlikely to occur during normal
incremental builds.
[1] https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html
Change-Id: I50d87b3d9012967eefb197be12b2e0f096b0b67c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Mediatek SoCs start operating at eMMC clock around 3MHz right after
power-on due to wrong src_hz value. In JEDEC spec, eMMC clock needs
under 400kHz.
When we need to set a clock output frequency, we actually set a
frequency division value. Originally, we set the source clock
frequency to 50MHz, the target frequency to 400KHz, and get the
division value 128. However, the actual source clock frequency is
400MHz, so the final actual output is 400MHz/128=3.125MHz.
So we correct source clock frequency to 400MHz for eMMC output
clock of 400KHz.
BUG=b:356578805
TEST=test boot ok; measure eMMC clock ok; no boot time impact
Change-Id: I9c8836b23fb21e9b0bdc80fbe85142ea0fa5e381
Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.corp-partner.google.com>
Signed-off-by: Kiwi Liu <kiwi.liu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84298
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to add GPE1 block
rather than checking if GPE1_STS(0) is '0'.
BUG:362310295
TEST=with the flag, boot google/fatcat or intel/ptlrvp to OS and check
that FADT table includes GPE1. FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Without the flag, boot to OS and check that FADT table does not include
GPE1. FADT should have:
GPE1 Block Address : 0
GPE1 Block Length : 0
GPE1 Base Offset : 0
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Idd8115044faff3161ea6bd1cae6c0fe8aa0ff8d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Due to beadrix DB has C1 port before, and add FW_CONFIG without C1 port for LTE sku.
BUG=b:364431483
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Set fw config to DB_PORTS_LTE and check
1.fw_config match found: DB_PORTS=DB_PORTS_LTE <= show LTE present message
2.USB3 port 3: enabled 1 <= LTE port enable
Change-Id: Ica5a2d6e19421b132a0bdbad77806a17e2c1ce69
Signed-off-by: Kevin Yang <kevin.yang@ecs.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84232
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
psys is not an optimal solution for no/low battery boot. Hence remove
function and macros related to psys implementation.
BUG=b:335046538
BRANCH=None
TEST=Build and boot on brox board
Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I01db9dad872cd4c9238b6c6aac73f3e6367710a4
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I3870bcd2482e55a5abcbd27cd0be18f25a35afbc
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84415
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add gfx register so GMA ACPI data is generated. Fixes brightness
controls on Windows.
Change-Id: I10948fb2ba670ba5232f1b116acdd1820ad0c07d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Change-Id: Ied08e5e9fe4913bd60474ed7dcf88b945172558d
Signed-off-by: Jeremy Soller <jeremy@sysetm76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In newer SOC, such as PTL, there is no DMI. Exclude DMI memory range in
northbridge.asl if DMI_BASE_SIZE is '0'
BUG=b:348678529
TEST=Build CB with DMI_BASE_SIZE set to '0' in the SOC directory. Boot
to OS and check ACPI PDRC device from the ACPI DSDT table. There should
not have an entry for DMI in its _CRS method.
Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I971af2eb214b5940fa09d9dc0f9717bb5f0dfb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84349
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the CL:chrome-internal:7651905,
Riven will use the fw_config to separate SAR setting.
CNVI + ID_0 --> wifi_sar_0.hex for WIFI6
PCIE + ID_1 --> wifi_sar_9.hex for WIFI7
BUG=b:366060274
TEST=build, enabled iwlwifi debug, and check dmesg as below.
iwl_sar_fill_table Chain[0]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
iwl_sar_fill_table Chain[1]:
iwl_sar_fill_table Band[0] = 132 * .125dBm
iwl_sar_fill_table Band[1] = 136 * .125dBm
iwl_sar_fill_table Band[2] = 136 * .125dBm
iwl_sar_fill_table Band[3] = 136 * .125dBm
iwl_sar_fill_table Band[4] = 136 * .125dBm
iwl_sar_fill_table Band[5] = 144 * .125dBm
iwl_sar_fill_table Band[6] = 144 * .125dBm
iwl_sar_fill_table Band[7] = 144 * .125dBm
iwl_sar_fill_table Band[8] = 144 * .125dBm
iwl_sar_fill_table Band[9] = 144 * .125dBm
iwl_sar_fill_table Band[10] = 144 * .125dBm
Cq-Depend: chrome-internal:7651905
Change-Id: I647d64a008991a7a20791b2c87ea6308af6bb82e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84339
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
tuning
If real-time tuning was enabled, 'PchPwrOptEnable' was set two times
with different values. This patch fixes the issue.
BUG=none
TEST=Enabled FSP UPD debug output and checked 'PchPwrOptEnable' offset
Change-Id: I2f31015c1da51a4ae1b8d5226f5d7b60a6023f3d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84399
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The real-time feature should also be activated for all mc_ehl
mainboards, as it has already been done for mainboard mc_ehl1. It
improves performance in the real-time environment for these mainboards.
Change-Id: I04859b2f32bc11344b0620925f2414e7a6df625e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84391
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ordering of the USB-C port locations is swapped. When facing the
left panel, the correct ordering is port 1 (left) then port 0 (right).
Swap the positions of the two USB-C ports to their correct values.
BUG=b:349822718
TEST=Booted to OS, confirmed correct physical_location at
/sys/class/typec.
Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I465a6eebc2a41ca9a618b1e86dee015cea40800b
Signed-off-by: Nigel Tao <nigeltao@golang.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The ELOG for CSE updates was being added in fsp_params.c, but the
actual update happens in cse_lite.c. This commit moves the ELOG to
cse_lite.c to more accurately reflect where the event is happening.
This also removes the need for a sol_type variable in
meteorlake/romstage/fsp_params.c.
It also helps to avoid redundant ELOG event entry while performing
CSE update (due to CSE RO to RW switch dependency).
BUG=b:361253028 (Multiple CSE sync elog prints for Nissa/Trulo)
TEST=Able to see only one instance of ELOG while performimg CSE sync.
w/o this patch:
elogtool list
0 | Log area cleared | 4088
1 | Kernel Event | Clean Shutdown
2 | Early Sign of Life | MRC Early SOL Screen Shown
3 | Early Sign of Life | CSE Sync Early SOL Screen Shown
4 | System boot | 29
5 | Memory Cache Update | Normal | Success
6 | Early Sign of Life | CSE Sync Early SOL Screen Shown
w/ this patch:
elogtool list
0 | Log area cleared | 4088
1 | Early Sign of Life | MRC Early SOL Screen Shown
2 | Memory Cache Update | Normal | Success
3 | System boot | 30
4 | Memory Cache Update | Normal | Success
5 | Early Sign of Life | CSE Sync Early SOL Screen Shown
Change-Id: I37fe3f097e581f79bf67db1ceb923f10ce651d62
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I60bb9e7df368b786e17bb49a6f35d27372fd21de
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84394
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was found due to the `_Static_assert()` from CB:84360 failing.
Change-Id: I5cf34d8c4e27835d126eb66f2015d2e9d93b700f
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake-up from sleep states.
3. Add SoC ASL code for SoC IPs like IPU, HDA etc.
4. PTL replaces DMI3 with SAF to ensure
common/block/acpi/acpi/northbridge.asl binding with PTL change,
#if DMI_BASE_SIZE guard check is added in northbridge.asl
5. include GPIO ASL that supports new pinctrl schema.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f15
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit drops redundant CRASHLOG option for the brox and brya
mainboards as SOC_INTEL_CRASHLOG config is now selected by the
Alder Lake SoC directly.
TEST=Able to build and boot google/brox w/o any functional impact of
the crashlog feature.
Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the CRASHLOG config option for Chrome OS boards. This allows the
Chrome OS crash reporter to collect and analyze crash dumps, aiding in
debugging and improving system stability.
TEST=Able to build and boot google/brox
Change-Id: Ia23ef1cbebdba9a3b724204eb25ee788afa3e8fd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I685d1aaabab0cb14f88025cdc80d86342e354a63
Signed-off-by: Alicja Michalska <alicja.michalska@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84388
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the GPIO pins for ISH to notify EC about the
tablet mode change in accordance with schematic_20240607.
BUG=b:347811875
TEST=Build and boot google/trulo. Placed the device in tabletmode & on
EC console,"tabletmode" command shows "tablet mode".
Change-Id: Id22e397e46b522428ffdabe34a445ed7e4fb6fc5
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This reverts commit 88a496a9c81ba6447a4c1453a45d09ee79f30309.
This workaround is not valid with the latest Intel PRQ silicon,
so I'm dropping it now. Additionally, able to boot to ChromeOS without
any hang, and I also ran an S0ix cycle without any failures.
BUG=b:244082753
TEST=Able to boot google/rex0 to CrOS.
Change-Id: Idf0da5841705888d2787f61dd6e6fada2fbe3e3e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84368
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BRYA0 and BOARD_GOOGLE_BRASK.
BOARD_GOOGLE_BRYA_COMMON already selects a crashlog config, and
brya0/brask board eventually selects the BOARD_GOOGLE_BRYA_COMMON
config, making SOC_INTEL_CRASHLOG redundant.
TEST=Successfully built and booted google/brya0.
Change-Id: Iaff7954d4dafb4c6ca72a1521dfb434fb36b495a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84364
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON
already selects a crashlog config, and brox baseboard eventually selects
the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG
redundant.
TEST=Successfully built and booted google/brox.
Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I794899fa55b510e6f39dadc1a831b86389ab31ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Commit bc8f5405b542 ("tgl mainboards: Move usb{2,3}_ports settings into
XHCI device scope") not only moved the USB port definitions under the
XHCI device reference, but also combined multiple register definitions.
In doing so, it broke the inheritance from the baseboard, since the
variant overridetree registers now replaced the entire usb2_ports/
usb3_ports structs, rather than replacing individual array elements
therein. This resulted in any USB ports inherited from the baseboard
and not overridden by the variant being non-functional as they were
not included in the resulting combined devicetree.
To fix this, return to overriding individual array elements in the
usb2/3_ports structs.
TEST=build/boot google/drobit. Verify all USB ports present and
functional. Verify mainboard/static.c in built shows all ports.
Change-Id: I54921fa4ecf594a1ecbcfa7c45e5d745d4a95652
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84348
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
1)Modify jubilant cpu power limit setting depend on the brox
baseboad settgins,refer to CL:
https://review.coreboot.org/c/coreboot/+/83752
2)Update PL1,PL2, and PL4 value from jubilant thermal design
PL1 = 15W
PL2 = 41W
PL4 = 87W
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant photo SKU1 and SKU2
boards with AC w/o battery.
Test on AC 65W and 45W w/o battery,and check the PL values.
Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
This commit refactors the long battery string implementation to include
caching of the EC response for battery information (model, serial, and
manufacturer).
This optimization reduces resume time by approximately 63ms by
minimizing communication overhead between the AP and EC.
BUG=b:366338622
TEST=Verified on google/tivviks_ufs:
* Long battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING is enabled.
* Short battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING=n.
Change-Id: I32ae5b5e618f20335f3d344811a97f1416df529e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Older ChromeOS devices (pre-CR50) do not support reading long battery
strings. This commit adds a Kconfig option,
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING, to enable or disable this
feature.
This allows devices with TPM_GOOGLE (CR50/TI50) to read and display
long battery strings, while older devices like google/link, wolf, samus,
and chell will continue to display only the first 8 characters.
This change ensures compatibility with older devices while enabling
the display of complete battery information on newer platforms.
BUG=b:366338622
TEST=Verified on google/tivviks_ufs:
* Long battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING is enabled.
* Short battery string is displayed when
EC_GOOGLE_CHROMEEC_READ_BATTERY_LONG_STRING=n.
Change-Id: I7859809278b7e926bbe8beb1a0a9e12c7e6c220d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84352
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Change-Id: I88baa159475ac57ec6a2a638ab84f76a6af4fe82
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84318
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery is disconnected and only adaptor is connected higher PL2
power draw causes cpu brown out and system does not boot to kernel. To
avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome
power spikes from SoC during boot. Remove Psys implementation as it
impacts active state platform performance.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=Able to successfully boot on 3 different Brox proto2 SKU1
and SKU2 boards with 65W, 45W and 30W adaptors for 3
iterations of cold boot.
Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ia35c656a66c623e88579cf4b9e894c77a404c375
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
It return 0 when google_chromeec_command() on success, so
get_input_power_voltage() should return adaptor voltage instead of
psys_config default value.
BUG=b:329037849
BRANCH=firmware-brya-14505.B
TEST= cbmem -c | grep -i PsysPmax
Change-Id: I848c92752b7a7b53f47c6296aad0bdda20e9b0bd
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84333
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, Add_gpl() was only used with C and ASL source code files,
and was hard coded to use the C /* */ style comment, preventing it from
being used with files with other comment styles. Convert this into a
generic function for adding arbitrary SPDX license identifiers for
arbitrary filetypes. This replaces the hard coded GPL-2.0-or-later
string used in gma-mainboard.ads with a call to the new function.
This is also used to add SPDX headers to Kconfig and Makefile sources;
as previous commits added them to all such files in the tree.
Tested against logs from a Latitude E6430 (Ivy Bridge) and Precision
M6800 (Haswell) to check that license headers that were already being
generated did not change.
Change-Id: I24a1ccd0afb7045e878bf6eaae7a23f828a9240d
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia5a745c86595554c83cd13a35c312c17987b716b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75682
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iebfadffd2da83992af983b8c0dfe2706f81eb728
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84317
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic78190a6bff233388bf52fdbb94fa3d7812010f2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I816c6f68840c122fbc37085e31a1b0368a819f4a
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84313
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GNR-AP supports up-to 128 cores/256 threads per socket. Enlarge
MAX_CPUS to 512 = 128*2*2 with 2 socket configuration considered.
Change-Id: I8dc46dcdd3ca1c3ddfa47fbb28912a2c6e4c46fa
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84312
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP n-1 headers in vc/intel/fsp/fsp2_0/graniterapid are updated to
pass compilation with full platform codes.
Change-Id: I1d13ddd4db8409a4928bd1bf152a9c284d138e48
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For Xeon-SP, DCACHE_BSP_STACK_SIZE is by default 0x10000. For GNR,
this default size is enough. Use the default size so that more
CAR spaces could be saved for other purpose.
Change-Id: I68a79df150c4954ef8d703987d7c0bb446ba4cda
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84302
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till ramstage.
2. Include only required headers into include/soc.
3. Skeleton code used to call FSP-S API.
BUG=b:348678529
TEST=Verified on Intel® Simics® Pre Silicon Simulation platform
for PTL using google/fatcat mainboard.
Change-Id: I61930726ad0c765bfa1d72c5df893262be884834
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84332
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The calculation of non-eviction ways (used for cache-as-ram
configuration) has been simplified by removing conditional move
instructions and directly adding the remainder to the quotient.
This achieves the same ceiling operation but with potentially improved
efficiency (less instructions).
No functional changes are expected.
TEST=Able to build and boot google/rex.
Change-Id: I7cf5ff19ec440d049edc3bf52c660dea96b1f08a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:362672785
TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is
populated under the right ACPI device scope.
Scope (\_SB.PCI0.XHCI.RHUB.HS10)
{
Name (BRDS, Package (0x02)
{
0x00000001,
Package (0x0A)
{
0x00000012,
0x00000001,
0x00000001,
0x7C,
0x70,
0x70,
0x70,
0x70,
0x70,
0x70
}
})
}
Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:363854853
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
|
|
The fields spi_block_size and base_addr of regular PSP header, lookup
and reserved of combo header, are constants. So we
move the setting statements to the creation functions.
Only update the count, size and fletcher in later function
file_dir_header.
TEST=Binary identical test on all AMD SOC platforms
Change-Id: I55c400e45536a57841b01d7c90d3fef9afa53e78
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch
also refactors the PAD_* macros by,
- Repurposing PAD_FUNC and dropping PAD_FUNC_SEL.
- Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit
initialization.
BUG=none
TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot
Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is already a check for invalid reference, however `git rev-parse
reference` doesn't fail on unknown commit hash unless `^{object}`
peeling operator is used (`^{commit}` can be used as well).
Change-Id: I7ef39aeee2e902ac2fad6ac41b546c47418e1dec
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update the default branch used for MrChromebox's edk2 fork from 2023-09
to 2024-08. This updated branch has been rebased on the latest upstream
stable tag (edk2-stable202408), and updates the EFI filesystem drivers
which had been causing some issues with bootable USBs created using
Rufus as it tried to unload the filesystem drivers and load its own.
TEST=build/boot google boards link, panther, lulu, reef, ampton, akemi,
banshee, zork, dewatt, frostflow with edk2 payload selected.
Change-Id: I459b668345ed2a34e198e6a3d3a2da94b2940e69
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84293
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Binary identical test on all AMD SOC platform with use_combo
Change-Id: I41c5c6fb5acf92604dd06becf1eda680a1fab545
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84131
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The new layout definition has a new way to support combo.
It packs multiple ISH entries into PSP L1 directory.
TEST=Identical test on all AMD platform
Change-Id: If573cdeaeb56e95d2fed235c9337fab82d622757
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove PL4 value modification based on PsysPL3 value.
BUG=None
BRANCH=None
TEST=Built and boot on brox system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
With the release 20240910 of the Intel microcode repository, it also
includes the updated microcode file with version 0x129, which makes the
one from the coreboot blobs repo superfluous. Thus, use the one from the
Intel repository again.
Change-Id: I7fb58874719a8373072419e34b3f8923f7db927d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84295
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 2f56505:
2024-08-14 19:59:27 -0600 - (microcode-20240813 Release)
to commit id fbfe741:
2024-09-10 12:02:03 -0600 - (microcode-20240910 Release)
This brings in 1 new commits:
fbfe741 microcode-20240910 Release
Change-Id: If66975c71ade0f08b81fb90d0a91e61ca3405804
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84294
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct the number of NID entries.
BUG=b:349996984
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I5f5553a5d8014f957d6b89ac4c1039594817bf32
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84184
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable ASPM of CPU PCIe4 for SSD to improve power consumption.
BUG=b:364441213
BRANCH=None
TEST="sh -c 'lspci -vvnn || lspci -nn'"
01:00.0 Non-Volatile memory controller
LnkCtl: ASPM L1 Enabled
Change-Id: I4380bb8748f2847b1824e20edb19578c7aedfe4f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
These identifiers are not included in the GPU list from Intel [1].
At the same time, 0x9B44 is not PCI DID of graphics device at all:
8086:9B44 - 10th Gen Core Processor Host Bridge/DRAM Registers [2].
[1] https://web.archive.org/web/20240731152818/https://
dgpu-docs.intel.com/devices/hardware-table.html
[2] https://web.archive.org/web/20231004011832/https://devicehunt.com/
view/type/pci/vendor/8086/device/9B44
Change-Id: I8ff7b062f930cb63ffd9caf240874742bd53fc23
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
According to the Intel GPU list [1], these devices have the following
IDs:
8086:9BA8 - Comet Lake-S GT1 [UHD Graphics 610] [2]
8086:9BA5 - Comet Lake-S GT1 [UHD Graphics 610]
8086:9BA4 - Comet Lake-H GT1 [UHD Graphics 610] [3]
8086:9BA2 - Comet Lake-H GT1 [UHD Graphics 610]
Allows coreboot to correctly initialize IGD (8086:9ba8) in Intel Celeron
G5905 CPU (ID a0653, Cometlake-H/S G1 (6+2), ucode: 000000f9).
This can also be verified using devicehunt.com [2,3].
[1] https://web.archive.org/web/20240731152818/https://
dgpu-docs.intel.com/devices/hardware-table.html
[2] https://web.archive.org/web/20240731150632/https://devicehunt.com/
view/type/pci/vendor/8086/device/9BA8
[3] https://web.archive.org/web/20230928015210/https://devicehunt.com/
view/type/pci/vendor/8086/device/9BA4
Change-Id: I776f434f3627d6fbd046a92eb736b1ffcac8274a
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
According to the Intel GPU list[1], 0x3E9B is DID of "Intel UHD Graphics
630" for the Coffee Lake processor family and has already been added to
the pci_ids.h as PCI_IDE_INTEL_CFL_H_GT2.
At the same time, the real PCI DID for Comet Lake-H GT2 is 0x9BC2 [1],
which is missing in the file.
[1] https://web.archive.org/web/20240731152818/https://
dgpu-docs.intel.com/devices/hardware-table.html
Change-Id: Iacab0a03388af3f6fd5d78a597580037889e8ef2
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This just orders the EXCLUDED_DIRS directories in a row based manner,
since there are quite a few them now and it is arguably easier to read
and to add new directories if they are written in a row based fashion.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I802aece355bba4900e71824d802c4b2438726e84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ifbe76bd69d847603345a4a1fa4f41e529634fa92
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84158
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I84aad5497d17065f9d42776452f2d2d24cd50a91
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
lpss_s0ix_enable is already defined as boolean:
`git grep lpss_s0ix_enable $(find -type f -name "*.h")
src/soc/intel/apollolake/chip.h: bool lpss_s0ix_enable;`
Change-Id: I34bd568defe202daaad6136b9c184bc292a226b3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Should make the sorting order of the paths more obvious.
Change-Id: Ie73e717f37f80a11a903e99cc094ea4d76e1ca1f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83827
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Alder Lake "Client" FSP paths have been replaced by symlinks to
Raptor Lake in the FSP repo. Hence we get the same files anyway and
can spare us to maintain the individual paths.
Change-Id: Ia9b256ce1940894e2cf31acaa4a83ea39f6723b6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:364484621, b:361828368
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
w/o this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
```
w/ this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
```
Change-Id: I8a7f69bb82ad24b29566541d7694f87f9c6458d6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84241
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7050a4d12efd65c7026abf3e45961e2061b7170a
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These aren't used so remove them
Change-Id: I340b3474fba1bc7fbde520138ae99c3e355882bf
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I63612af7320dfdbe57029b898b4cf07e9d6f13b0
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Reporting the battery serial number to ACPI causes Windows to say
there isn't a battery present. As the serial number is as useful as
waterproof towel, don't do it.
Change-Id: I97a28b1d8d7bb45ea4790c8125cd3c1bc52ee5f9
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
As the merlin EC supports both the IT8987 and IT5570, move the
check into the code so the same variant directory can be used
for both chips.
Change-Id: I8c43a367e42f7e56ddd26b1c8fe7bf4b275d4ac3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83632
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the USB configs are in the devicetree, only the
bootblock_mainboard_early_init function remains in early_init.c. It is
identical between every variant except the E6230, which enabled fewer
decode ranges in the LPC_EN register. Enabling the additional decode
ranges probably shouldn't cause issues, so go with the majority.
TEST=Timeless builds do not change with the exception of the E6230.
Change-Id: Ic43915888f5893652991b7402ebab3bd3a2cf278
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
ifdtool will exit with success while encountering an unrecognized flag.
For example, -g is a newly introduced flag, when we want to call it with
an older version of ifdtool, we will get the return value 0 and cause
confusion.
This patch change the exit status for unrecognized flags and doesn't
change the exit status for -h and -?.
BUG=b:362983041
BRANCH=none
TEST=futility update --servo --image /var/tmp/image.bin --quirks
unlock_csme on the servo host with old ifdtool
Signed-off-by: Hsuan Ting Chen <roccochen@google.com>
Change-Id: I046ad7ec790cda41a98a1de5cd730d32f65a9067
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update eMMC DLL tuning values for improved initialization reliability.
BUG=b:361013271
TEST=Cold reboot stress test over 2500 cycles
Change-Id: Icd1f9c7bdec2bc99152a13ac4ce0724a26718a52
Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84248
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Joxer experienced error messages during developer mode entry due to
failed USB-C1 probing.
This patch adds the `DB_USB DB_1C` probe directive to the `conn1`
device in the overridetree, ensuring USB-C1 is only probed when
`FW_CONFIG` supports the applicable hardware SKU.
This should resolve the error flood seen during dev mode entry on
Joxer.
BUG=b:364240631
TEST=Able to build and boot google/joxer to OS without any error.
w/o this patch:
send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3
update_all_tcss_ports_states: port C1: get_usb_pd_mux_info failed
send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3
w/ this patch:
No error reported during dev mode entry
Change-Id: I8cdefa01409d5a8a75032f30dacde40057e064dd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I3ac96786b4bbf7c8b3a8b57f58df396b1b754bd3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83953
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I991ce1e264c3ca01bc34904b5efe758a3eb58806
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83952
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<commonlib/bsd/compiler.h> is automatically included.
Change-Id: I653f6c6099512c6e5ab64207f99e7813e4403f05
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Commit 35599f9a6671 (Docs: Replace Recommonmark with MyST Parser)
converted recommonmark style toctrees in bulk using a script. This was
done by searching for lists of references, which is how recommonmark
denoted toctree entries. However, this also converted lists of external
URLs, which would not normally be included in the toctree. Revert these
cases back to lists of URLs as they were before the migration.
Change-Id: Ie4da3d908d4b84c2c7e3572fb4baaeed1f8edb45
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The content of this page fits lib the best, which also reflects the
location of the rmodule runtime code in the src tree. This also fixes a
"document isn't included in any toctree" warning from Sphinx since it is
now added to the lib/index.md toctree.
Change-Id: I86545f4c1a7e1b3ccefa4f6085e764536f33f29c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Increase the header levels of headers following the initial "Relocatable
Modules (rmodules)" so that there is only one title for the page with
the other headings as subheadings. Also fix header capitalization while
we're here.
Change-Id: I72ae99ba10bf5b2386da2cc702efaf25328d6811
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84239
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `!FSP_USE_REPO` is most specific, if we're not using the FSP repo,
we can ignore all the FSP-repo paths. Hence put these first.
Having `FSP_TYPE_IOT` selected is also more specific, we can ignore all
the "Client" paths then. This makes sure that we don't catch a "Client"
by accident (otherwise we'd have to add a `!FSP_TYPE_IOT` for those).
Change-Id: Ibe9931d8f964a337c46fde31a3bc22c69d40eded
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Currently, cbfstool prints the following error message when the added
file doesn't fit in the region:
E: Could not add [file, 1024 bytes (1 KB)@0x0]; too big?
It requires manual inspection to know the space left in the region. To
make that easier, also print the maximum empty CBFS entry size in the
error message:
E: Could not add file [header 76 + content 1024 bytes (1 KB)] @0x0;
Largest empty slot: 512 bytes
Change-Id: I00bcc83abe8b0a33dcd7b75521e6cfccd8953661
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
BUG=none
TEST=emerge-{asurada, cherry, corsola, geralt, rauru} coreboot
Change-Id: If35dcc4d88732f92c7c43a5eed0478ec52cf1802
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84221
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Extracted from NDA spec #56995:
"The A/B recovery scheme formally separates the SPI flash space into
different partitions; a primary, “A” and secondary, “B”, which hold
the same set of system firmware. Under this scheme, the partitions A
and B can hold identical contents initially, but each partition can be
updated individually.
Normally the system boots from partition A, but if the A partition is
found to be corrupted, the system will switch to partition B and
boot. The OEM BIOS can then choose to continue the boot from partition
B, or repair partition A using contents from partition B."
The Cezanne platform supports both A/B recovery and no recovery
method. It needs this flag passed to amdfwtool to enable the A/B
recovery layout.
Change-Id: Id1c8028faee9c544628d65fd77be2a378ed7eab6
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add a Kconfig choice to select the IGD UMA allocation, which selects a
precompiled ACPB binary with the corresponding UMA value set. Default
to the previous value (128MB) for non-ChromeOS builds, and 64MB for
ChromeOS as that is the value used there.
TEST=build/boot google/morphius, verify UMA size changes with selection
via dxdiag tool under Windows.
Change-Id: I6debd10527c33ce37ef3ada20955c8f7b7500039
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84237
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MyST Parser uses {eval-rst} to denote embedded reStructuredText blocks,
not eval_rst as was previously used by recommonmark.
Change-Id: I3476d205605675690eb0d434f4ae9b7b2f091748
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84238
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Xeon-SP supports MMIO high range, a.k.a. MMIO range above 4G. FSP will
assign domain MMIO high windows from this range.
However, there will be unassigned parts among these high windows for
non-domain device usage (e.g. misc devices belonging to an IIO stack
but not belonged to any PCIe domains under that stack). This will cause
segmentation in MTRR UC coverage.
For example, in SPR-XCC where only CPM0/HQM0 are supported and
instantiated to PCIe domains, MMIO ranges are still reserved for
CPM1/HQM1. See more at src/soc/intel/xeon_sp/spr/ioat.c.
Reserve MMIO high range as a whole under domain0/00:0.0. During MTRR
calculation, this reservation will connect the discontinued domain MMIO
high windows together to form one continuous range, and save MTRR
register usage from inadequacy.
This change is initially raised for SPR but could be effective for GNR
as well.
TESTED = Build and boot in intel/archercity CRB, MTRR register usage
decreases from 7 to 3 in 2S system.
TESTED = Only setting MTRR for below 4GB ranges test fails with
LinuxBoot on SPR (through x86_setup_mtrrs_with_detect_no_above_4gb)
tsc: Detected 2000.000 MHz processor
last_pfn = 0x2080000 max_arch_pfn = 0x10000000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 129024MB of RAM.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/cpu/mtrr/cleanup.c:978 mtrr_trim_uncached_memory+0x2b9/0x2f9
...
Call Trace:
? 0xffffffff8f600000
? setup_arch+0x4bb/0xaed
? printk+0x53/0x6a
? start_kernel+0x55/0x507
? load_ucode_intel_bsp+0x1c/0x4d
? secondary_startup_64_no_verify+0xc2/0xcb
random: get_random_bytes called from init_oops_id+0x1d/0x2c with crng_init=0
---[ end trace 0e56686fd458f0c5 ]---
update e820 for mtrr
modified physical RAM map:
modified: [mem 0x0000000000000000-0x0000000000000fff] reserved
...
modified: [mem 0x00000000ff000000-0x000000207fffffff] reserved
last_pfn = 0x6354e max_arch_pfn = 0x10000000000
Memory KASLR using RDRAND RDTSC...
x2apic: enabled by BIOS, switching to x2apic ops
Using GB pages for direct mapping
...
Initmem setup node 0 [mem 0x0000000000001000-0x000000006354dfff]
DMA zone: 28769 pages in unavailable ranges
DMA32 zone: 19122 pages in unavailable ranges
BUG: unable to handle page fault for address: ff24b56eba60cff8
BAD
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.10.50 #2
...
Call Trace:
? set_pte_vaddr_p4d+0x24/0x35
? __native_set_fixmap+0x21/0x28
? map_vsyscall+0x35/0x56
? setup_arch+0xa00/0xaed
? printk+0x53/0x6a
? start_kernel+0x55/0x507
? load_ucode_intel_bsp+0x1c/0x4d
? secondary_startup_64_no_verify+0xc2/0xcb
CR2: ff24b56eba60cff8
---[ end trace 0e56686fd458f0c6 ]---
RIP: 0010:fill_pud+0xa/0x62
...
Kernel panic - not syncing: Attempted to kill the idle task!
---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Change-Id: Ib2a0e1f1f13e797c1fab6aca589d060c4d3fa15b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83538
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use the AZALIA_PIN_DESC macro from include/device/azalia_device.h
instead of magic numbers, as well as the enums for each of the register
field values. The macros were generated by running util/hda-decoder
against the original azalia logs used for the original board ports.
TEST=Timeless builds for all variants did not change between main
and this patch
Change-Id: If5ecee39efbddbba101f820dead82efcb848b6bc
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84099
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add a Kconfig choice to select the IGD UMA allocation. Default to the
previous value (32MB).
TEST=build/boot google/liara, verify UMA size changes with selection.
Change-Id: Ia53d6d39d4f06c896ec13808234144b89da101f8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84235
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add definitions for the GPIO pins on Panther Lake SoC,
as well as GPIO IRQ routing information and defines for ACPI ASL.
For now, add the following GPIO communities and GPIO groups:
Comm. 0: GPP_V, GPP_C
Comm. 1: GPP_F, GPP_E
Comm. 3: CPUJTAG, GPP_H, GPP_A, VGPIO3
Comm. 4: GPP_S
Comm. 5: GPP_B, GPP_D, VGPIO
ref doc:
- PT EDS vol2
- Panther Lake H GPIO Implementation Summary (#817954)
BUG=b:348678529
TEST=Verify on Intel Silicon platform for PTL using google/fatcat
mainboard. Note that these GPIO changes cannot be verified along as
they are merely data structure and defines for the SOC. With the
GPIO ASL, we should see the following GPIO instances under
/sys/bus/acpi/devices when booting to OS:
INTC10BC:00/ INTC10BC:01/ INTC10BC:02/ INTC10BC:03/ INTC10BC:04/
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iae1bc072841214efaec7a10719dbc742f2da795b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Based on DOC #767454 (public) version 1.2. Allows to boot the
HARDKERNEL ODROID H4+ with N97 SoC. Without this patch the MCH ID
was not recognized and the SA driver did not pick up the stolen
ranges, causing the PCI MMIO allocation to be placed in the stolen
areas.
TEST=Boot HARDKERNEL ODROID H4+ with N97 SoC to Ubuntu 23.04.
Change-Id: I0fbdb12c6411e4109e68a13960b4570701629bc9
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84212
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add a Kconfig choice to select the default IGD memory allocation, for
users/boards which do not use an option table to set it.
TEST=build/boot google/link, verify IGD size changes with selection.
Change-Id: I83d57cf4657cfccbb21416c5da05eeff9e95a44f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reduce resume time.
BUG=b:361728839
TEST=emerge-dedede coreboot chromeos-bootimage
& test touchscreen function on awasuki DUT
Change-Id: I32b2b1c709ecab964a0e449d416c5d0ee2c1d97d
Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84196
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The Max size of L2 table is 0x400. If we set it to other value, the
the A/B recovery image can not boot on Cezanne/Majolica platform.
The affected boards are Birman, Chausie, Skyrim, Mayan. Other boards
are binary identical. Tested on Skyrim and image can boot.
Change-Id: I2c0af6579dbe2a3a61e1fe9c79d69491fd45a5bb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84194
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
