summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-11-07EC: Prepare to read and log last post code from previous bootDuncan Laurie
(elog portion, support in EC code pending) - Use a new EC command to read the last post code from the previous boot - If the post code is not well-known final boot or resume code then log it Change-Id: Id6249e9a182243eb87c777edd56f48de72125e77 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1703 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07SandyBridge/IvyBridge: Use flash map to find MRC cacheStefan Reinauer
Until now, the MRC cache position and size was hard coded in Kconfig. However, on ChromeOS devices, it should be determined by reading the FMAP. This patch provides a minimalistic FMAP parser (libflashmap was too complex and OS centered) to allow reading the in-ROM flash map and look for sections. This will also be needed on some partner devices where coreboot will have to find the VPD in order to set up the device's mac address correctly. The MRC cache implementation demonstrates how to use the FMAP parser. Change-Id: I34964b72587443a6ca4f27407d778af8728565f8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1701 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Strip quotes from $(objcbfs)Stefan Reinauer
Otherwise object paths will look like build/cbfs/"fallback"/... Change-Id: I3e60f90f7490e71b0da075d3ea8fc847abc07938 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1700 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Add missing newline in error messageStefan Reinauer
This is purely cosmetic. All error messages in the Sandybridge raminit code printed a newline at the end. Change-Id: I880d291928291d487039850a2a3d53a1101124ba Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1699 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: add explicit dependency on build.hVincent Palatin
build.h is generated at build time, with highly parallel builds, we might try to compile the rtc driver too early. Change-Id: I9a2681484d58b67ed3061669fbdf52ac5ad14dab Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1698 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: erase CMOS memory after power failureVincent Palatin
When a power failure happens on the RTC rail, the CMOS memory (including the RTC registers) is filled with garbage. So, we erase the full first bank (112 bytes) and we reset the RTC date to the build date. To test, disconnect the CMOS battery to produce an RTC power failure, then boot the machine and observe the RTC date is the build date using "cat /sys/class/rtc/rtc0/date" Change-Id: I684bb3ad5079f96825555d4ed84dc0f7914e9884 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1697 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07AMD G34 CPU: change lapic_id in northbridge.c to accommodate G34 CPUSiyuan Wang
Each G34 socket has two node. Previous lapic algorithm is written for the CPU which has one node per socket. I test the code on h8qgi with 4 family 15 CPUs(8 cores per CPU). The topology is: socket 0 --> Node 0, Node 1 socket 2 --> Node 2, Node 3 socket 1 --> Node 4, Node 5 socket 3 --> Node 6, Node 7 Each node has 4 cores. I change the code according to this topology. Change-Id: I45f242e0dfc61bd9b18afc952d7a0ad6a0fc3855 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1659 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07CMOS: Move MRC seed offset into upper bankDuncan Laurie
This will allow the lower bank to be cleared without impacting the ability to suspend/resume. Change-Id: Iaec3c9e7e40c334053c814eaddd1f614df245a73 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1696 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07rtc: force mc146818 register D to a correct valueVincent Palatin
On Panther Point PCH (and maybe cougar point), when some of the register D reserved bits are set, the RTC starts misbehaving (e.g. incrementing the year byte every second). There are probably undocumented features implemented behind those bits. Let's reset register D to a known state to ensure we get the expected RTC behavior. Change-Id: I7e2c2a2c6130a974bccb3d760b41eaa579a58b67 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/1695 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Fix CONFIG_ use in i8254.cStefan Reinauer
We always define CONFIG_ variables, even if they're not set. Hence, remove the check whether CONFIG_UDELAY_TIMER2 is defined Change-Id: Iefdf2389941f2cc63ae4f13ac6b213da4c96b201 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1694 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Add POST code for "All devices initialized"Stefan Reinauer
Right now we only had a post code for "All devices enabled" which was emitted at the wrong time (after the device initialize stage rather than the device enable stage) Change-Id: Iee82bff020de844c7095703f8d6521953003032c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1693 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-07Move global variable check to MakefileStefan Reinauer
Our linker script for romstage checks for global variables and makes the build fail if there are any (on non-AMD systems). This is great, but having the build fail without any indication which variables are global is not very useful. Moving the check to the Makefile allows us to let the linking stage succeed and reveil which variable names end up in the data and bss sections of the binary. To test, add "int foo;" as the first line in src/mainboard/samsung/lumpy/romstage.c and build coreboot for Lumpy. See the build break the following way: LINK cbfs/fallback/romstage_null.debug Forbidden global variables in romstage: 00006a84 B foo Change-Id: I3c8780888f46a6577ffd36bcea317997b4f84f6f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1692 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07Leave power control registers unlockedSameer Nanda
To allow easy experimentation with thermals, leave power control registers unlocked. Change-Id: Ia53065f3f220c2faed58e7d53e60c3f169ae58ec Signed-off-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: http://review.coreboot.org/1688 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07Fix whitespace issue with help message in Kconfig fileDave Frodin
Every line of text after a 'help' label in a Kconfig file must have the same whitespace preceding it, otherwise it's no longer considered help text. Change-Id: I97093bee72b295b315d78d4c26d7186bf1017fda Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1687 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-11-07AMD rd890 late.c: Don't enable PCIe ports after PCIe init.Siyuan Wang
PCIE devices are detected and initialized by the AMD PCIe init functions, which is in cimx rd890. The parameters are read from devicetree.cb before PCIe init. Now, all bridges and devices are trained on the device 0.0 enable. After PCIe init, the PCIe ports with devices are on and the PCIe ports without devices are off. so resources may be allocated correctly during the rest of the PCI scan. But if the devicetree was being used to enable/disable devices after initialization, the problems would arise. Take a look at the serial log: do_pci_scan_bridge for PCI: 00:02.0 PCI: pci_scan_bus for bus 01 PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 do_pci_scan_bridge for PCI: 00:03.0 PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 do_pci_scan_bridge returns max 2 do_pci_scan_bridge for PCI: 00:04.0 PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 do_pci_scan_bridge returns max 3 PCI bridge 02.0, 03.0 and 04.0 are not inserted devices, but these bridges are still scanned. This is not correct. Change-Id: I87dac5f062c6926081970ed0c5f26a7e3f447395 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1640 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-07AMD agesa family15: PCI domain should scan bus from 0x18.0Siyuan Wang
There are four mainboards using agesa family15 code: Supermicro h8scm and h8qgi, Tyan s8226 and AMD dinar. All of these boards' PCI domain starts from 0x18.0. Take h8scm as an example, PCI devices from 0.0 to 0x14.5 is under 0x18.0. Now, the PCI domain's scan bus function stats from 0.0. This would result to the PCI devices be scanned twice. Because when the function run to device 18.0, it would scan from 0.0 again. This issue would result to 2 problems: 1) PCI device may be assigned two different PCI address. If this happenned on VGA device, coreboot maybe not load vga bios correctly. 2) coreboot initializes rd890's IO APIC twice. So this patch scans from 0x18.0 and could resolve the problems above. Change-Id: I90fbdf695413fd24c7a5e3e9b426dc7ca6e128b1 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1639 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-06acpi: Add support for DMAR tables (Intel IOMMU support)Patrick Georgi
Adds lowlevel handling of DMAR tables for use by mainboards' ACPI code. Not much automagic (yet). Change-Id: Ia86e950dfcc5b9994202ec0e2f6d9a2912c74ad8 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1654 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06smsc/lpc47n227: Make early_serial usablePatrick Georgi
This is the smallest possible change to make early_serial.c compile when included from romstage.c. early_serial could be reworked to be built as separate unit (romstage-y), but that should be done for all SuperIOs, not some individual outlier. Change-Id: I90ee66b43c9677b86b1b5d6fcc8febfbe58d80dd Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1686 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06cpu/intel/model_1067x: Add proper c-state/p-state/thermal supportNico Huber
Change-Id: I853454e8f5617fb7af5dddd7288bdeeacc7b1b8e Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06intel/socket_BGA956: enable speedstep, CAR, MMX, SSEPatrick Georgi
All of these capabilities exist on all CPUs supported on this socket. Change-Id: I54f34e48e34bb6ab5b9954ab7ece8c2c3a1a8e67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1664 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Add name field for deviceKyösti Mälkki
The constant field "name" in chip_operations is common to multiple different devices within a chip and cannot reflect the actual device as found on the platform. The intention is that a driver sets dev->name as part of the device enumeration sequence with the detected hardware type and revision. The field is for debug print use only. Change-Id: Ib7bf90ba3c618ad0cb715d80d6a937ceaae0adcf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1634 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-05Overhaul speedstep codeNico Huber
This adds proper support for turbo and super-low-frequency modes. Calculation of the p-states has been rewritten and moved into an extra file speedstep.c so it can be used for non-acpi stuff like EMTTM table generation. It has been tested with a Core2Duo T9400 (Penryn) and a Core Duo T2300 (Yonah) processor. Change-Id: I5f7104fc921ba67d85794254f11d486b6688ecec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1658 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05Fix some indentation flaws and break very long linesNico Huber
Change-Id: I3efef6bc8f519382ffdd92eb10b4bcd1a4361ba9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02remove enable_cache() of 3 mainboardsSiyuan Wang
Because enable cache is added at the end of disable_cache_as_ram, ( http://review.coreboot.org/#/c/1662/2/src/cpu/amd/agesa/cache_as_ram.inc ) enable_cache() should be removed. The 3 mainboards are: amd parmer, amd thatcher and tyan s8226 Change-Id: If870ca07d2e97b9e860a2e2315f551251c7a4ed2 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1669 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-11-02Persimmon: disable the unconnected Full-Speed USB portDave Frodin
Change-Id: Ia3824059a38412896ed2be0c8714018b2291c9f8 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1660 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-02AMD agesa: add enable cache at the end of disable_cache_as_ramSiyuan Wang
add this code according to src/include/cpu/x86/cache.h ,line 92, functin enable_cache() Change-Id: Ida96a98397eeed98dd61ca979e8c5a33bf00f9e5 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1662 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-02Correct FSB reading in speedstep ACPINico Huber
We parsed the MSR the wrong way, and didn't support some valid values. Change-Id: Ia42e3de05dd76b6830aaa310ec82031d36def3a0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02crossgcc: build expat and python in silenceIdwer Vollering
Don't let expat and/or python show the compile process on stdout. Instead direct this output to crossgcc-build.log. Fix the logfile path for python. Change-Id: I431dabf6955d7eef3e54c96d0fb11b92d1cee96d Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1667 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02Fix some issues with new "reference" toolchainStefan Reinauer
Unfortunately the reference tool chain was updated without ever even testing it on an abuild run. This broke a number of ports. This change gets coreboot at least compiling again for all supported systems. Change-Id: I92c7cbc834de6d792fdab86b75df339e2874c52e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1670 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-11-01add .gitreviewDavid Hendricks
This adds a .gitreview file for use with the git-review tool. More information is available at the URL below: https://labsconsole.wikimedia.org/wiki/Git-review Change-Id: I723d78bf7dd81c5756e684d5b166210246fe2daf Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1665 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-01Merge cpu/intel/acpi.h into cpu/intel/speedstep.hNico Huber
We had only some MSR definitions in there, which are used in speedstep related code. I think speedstep.h is the better and less confusing place for these. Change-Id: I1eddea72c1e2d3b2f651468b08b3c6f88b713149 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1655 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-30Add support for socket LGA775Stefan Tauner
Change-Id: Ia7ef3a4cbc3638a9c9a48b297e392e4e655b6e6b Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1581 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-30Fix ExecuteFinalHltInstruction function in f15h family codeKostr
Current ExecuteFinalHltInstruction function doesn't work well. (at least in configuration Supermicro board with Orochi AMD Opteron processors (model OS6234WKTCGGU)) System reboots when trying to halt core 2,4,6,8 or 10 (OS6234WKTCGGU is 12 core processor) Based on this information, i think that code doesn't really work with f15 compute unit (CU) system. Replacing ExecuteFinalHltInstruction function with analogous function from f15tn family code fix this problem. Both functions written from the same cahalt.asm file, but f15tn version seems more completed Change-Id: I3942abcdf21f1b86a44c01cc477714e44a40b9cf Signed-off-by: Kostr <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/1569 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-30AMD SB800: PCIE slots on PersimmonZheng Bao
Enable the PCIE bridge which is connected to the PCIE slot. Change-Id: I1b3fb59990e06d7bc7cf19639f2b93dbb7bf9b3e Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1098 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-29Drop get_smbios_data from chip_operationsKyösti Mälkki
We only want to add data once per device. Using the one in chip_operations is not very usable anyway, as different devices under the same chip directory would need to output entirely different sets of data. Change-Id: I96690c4c699667343ebef44a7f3de1f974cf6d6d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1492 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-10-29Fix reading of number of interrupts for IO-APICsNico Huber
The number read from the io-apic register represents the index of the highest interrupt redirection entry, i.e. the number of interrupts minus one. Change-Id: I54c992e4ff400de24bb9fef5d82251078f92c588 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1624 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-29Hide all _ROM_RUN Kconfig options if the payload is SeaBIOSPeter Stuge
The options are shown regardless of payload if CONFIG_EXPERT is set. Change-Id: I12c81ce41a0e300e852481424eadc83f281863bf Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1638 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-29Run option ROMs in coreboot by default only if the payload is not SeaBIOSPeter Stuge
Change-Id: I29fb86ff3a3187b720ce5ef246c4eeee696ab5cd Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1637 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-29Clarify that _ROM_RUN Kconfig options control if ROMs are run by corebootPeter Stuge
Also clarify that enabling these options is generally not desirable if using SeaBIOS as payload since the option ROMs are run by SeaBIOS with more complete BIOS interrupt services available than coreboot. Change-Id: Ic4a45c351a4933aedad08d70a088eab04ca35b05 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-28IEI PM-LX2-800-R10: Added preliminary mainboard supportRicardo Martins
Details for this board are available at http://usa.ieiworld.com/product_groups/industrial/content.aspx?gid=00001000010000000001&cid=09050662496936266123&id=09034367569861123956 Support for the IT8888 PCI to ISA bridge will be added in a later patch. Change-Id: Iaefe47f5ad405a56d230c929e5850156eb0f60ae Signed-off-by: Ricardo Martins <rasmartins@gmail.com> Reviewed-on: http://review.coreboot.org/1152 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-27inteltool: Add output of 64bit registers in PMBASENico Huber
Output values of 64bit registers and fix settings for GPE0_EN for ICH9/10. Change-Id: I8ca6b32500331707670972b38466345f581844cd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1625 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27libpayload: New AHCI, ATA and ATAPI driversNico Huber
This adds a new interface for storage devices. A driver for ATA and ATAPI drives on AHCI host controllers comes along. The interface is very simple and was designed to match FILO's needs. It consists of three functions: void storage_initialize(void); Initializes controllers. Should be called once at startup. storage_poll_t storage_probe(size_t dev_num); with typedef enum { POLL_NO_DEVICE = -2, POLL_ERROR = -1, POLL_NO_MEDIUM = 0, POLL_MEDIUM_PRESENT = 1, } storage_poll_t; Looks for a drive with number dev_num (drives are counted from zero) and polls for a medium in the drive if appropriate. int storage_read_blocks512(size_t dev_num, u64 start, size_t count, unsigned char *buf); Reads count blocks of 512 bytes from block start of drive dev_num into buf. Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27Take care of NULL chip_ops->nameKyösti Mälkki
Change-Id: Ic44915cdb07e0d87962eff0744acefce2a4845a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27Reorder entries in .gitignoreStefan Tauner
Change-Id: I7fcf190ef92b06b857d8b85c3d27da9cdee071b1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1633 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27Add docs and util files to .gitignoreStefan Tauner
This adds... - generated documentation files - all kinds of stuff in the util subdirectories Change-Id: I47ab6d239aae725f54413f03424f40002ac5a275 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1572 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27crossgcc: update to Python 2.7.3Idwer Vollering
Change-Id: I9db10e8c7dcd693cc4ab935c587da02dd7eb2bc5 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1621 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27crossgcc: update to expat 2.1.0Idwer Vollering
Change-Id: Id0b736d402b33138e27b18c74e5ed8ffab0bcccb Signed-off-by: Idwer Vollering <vidwer@gmail.com> Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1620 Tested-by: build bot (Jenkins)
2012-10-26iwave/iWRainbowG6: use 16bit access for a register which is not 32bit alignedSebastian Andrzej Siewior
The PCI registers should be accessed aligned and 0x62 is not 32bit aligned therefore this patch changes it to a 16bit access. Change-Id: I00725a4569f471eedb061834f626911b42e734fb Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1631 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-26northbridge/sch: move the \n so it reads a little betterSebastian Andrzej Siewior
Without this, the output of "Setting up ACPI…" continues right after the output of stepping. Change-Id: I2ad7cc3e55884ff509600b01274258b8e8250981 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1632 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-26iwave/iWRainbowG6: remove USE_DCACHE_RAMSebastian Andrzej Siewior
This is not available as a config option anymore. Change-Id: Icac173d62928423a08671321ec21d4af82c5cded Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1630 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-10-26northbridge/sch: read the size of main memory from the proper registerSebastian Andrzej Siewior
I don't know if the size main memory supposed to be in PCI(0,0) reg 0x9c but it is not written there. The size of memory is written in src/northbridge/intel/sch/raminit.c to SCH port(2, 8, 4) (look for "Setting up TOM"). Change-Id: Iea04a5185bda56f61d1c382533d5a0dac429ebbd Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1629 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-10-26northbridge/sch: Read the GPU memory from the correct PCI deviceSebastian Andrzej Siewior
The GGC register which contains the size of memory that is used for GPU is in PCI device 2,0 and not 0,0. It is set to to 4MiB in src/mainboard/iwave/iWRainbowG6/romstage.c. Change-Id: Ie9f1cc60544ecd9cad770f34c83c33564a6129d4 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1628 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-10-26northbridge/sch: don't overwrite hightables with GPU / TSEG memorySebastian Andrzej Siewior
Without this, the hightables are placed just before the end of memory. However we might have the GPU memory located at the exact same spot, that is in the last 4 MiB. So without this patch, this area won't remain marked as "CONFIGURATION TABLES" within coreboot's memory table but becomes "RESERVED" because it is part of the PCI(2,0) device. Change-Id: Ibd111c167c2f6ac03b0ba68581a74ecbd2c9c160 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-on: http://review.coreboot.org/1627 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-10-26crossgcc: update mingw w32api's download URLIdwer Vollering
Correct the download URL of mingw's w32api. Change-Id: I98fb43c121399c23f6693ade5cd3b42bc9463724 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1619 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-26buildgcc: redirect error output to /dev/nullZheng Bao
Change-Id: I7cd63248eb8abb711cecce41e3f8a282b34aa126 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1548 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-26crossgcc: update to mingwrt 3.20-2Idwer Vollering
This patch updates crossgcc to download and compile mingwrt 3.20-2 Change-Id: Ic5ed2df4c3643e469a62c51643d3fc756eb3e615 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1617 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-10-25crossgcc: update to binutils 2.23Idwer Vollering
This patch updates crossgcc to download and compile binutils 2.23 Change-Id: I75a24ce6fb9f6ac7ae53671314c410b9b0d80aa8 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1615 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-25crossgcc: update to MPC 1.0.1Idwer Vollering
This patch updates crossgcc to download and compile MPC 1.0.1 Change-Id: I7a2a21afc8c26e4fb7b6553c7fd98cc054d01570 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1614 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-25crossgcc: update to MPFR 3.1.1Idwer Vollering
This patch updates crossgcc to download and compile MPFR 3.1.1 Change-Id: I6c479db5d6d632dcc2201c3771b43e2b663877e1 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1613 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-25crossgcc: update to GDB 7.5Idwer Vollering
This patch updates crossgcc to download and build GDB 7.5 Change-Id: I38fc3591396f072ead399b22f516ec765480ea40 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1612 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-25crossgcc: update to gcc 4.7.2Idwer Vollering
Update crossgcc to use gcc 4.7.2. This requires a minor change to util/crossgcc/buildgcc as well. Tested on hardware with asus/p2b and lenovo/x60. Change-Id: Ia3921844670ca99741e5715def14dd969f305ab7 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1609 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-25crossgcc: fix compilation of acpicaIdwer Vollering
Compilation of acpica-20120420 is broken (and old, but I'll take care of that in a future patch), let's fix that ("Building IASL 20120420 ... failed"). Change-Id: If5fd5cd93d748f78b7c059323f9f810666e32cc7 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/1607 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-24Trinity: Initialize the pointer prior to using itZheng Bao
Change-Id: I2f10909a626fb64c7f95663ddd79a3b899f73bc4 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1606 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-23kconfig: Some terms or curses libraries treat backspace as 0x08Zheng Bao
Change-Id: Ie4e4a2f0d68643a8f46d24ee7bd1b953e9fe14a5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1605 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-22build: build coreboot on mingw.Zheng Bao
regex, pdcurses, wsock(for itohl) are seperated libraries. mmap and unmmap are ported from git. Issues: 1. The length of command line is limited. That makes the Thather can not be built because too many obj.o need to be built. Change-Id: I1d60ec5c7720c1e712e246c4cd12e4b718fed05f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-22cbfstool: Add -mno-ms-bitfields on (mingw)Zheng Bao
The default gcc on mingw will process the __attribute__ ((packed)) in a different way other than non-win system. Change-Id: Iac9f4476c922472d0b447f1c3ef60e8e13bd902f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1603 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-22Makefile: No need to mkdir when distcleanZheng Bao
make distclean causes error on mingw: ------- rm: cannot lstat `build/util': Permission denied make: *** [distclean] Error 1 ------- Guess, When the distclean is made by multi-process, the mkdir in the Makefile will execute when build is removed. That causes conflicts. Change-Id: Ia41ecc5d1db2fa9d3328c81ac1d33fa94779492d Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1602 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-22gitconfig: Create .git/hooks before copying files.Zheng Bao
Change-Id: Id5564bf7a12b3ea9a5e60bd9522466157ace8c65 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1601 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-22change conflicted typedef in src/vendorcode/amd/agesa/f15/Porting.hSiyuan Wang
src/vendorcode/amd/agesa/f15/Porting.h has some conflicted typedef with src/include/cpu/amd/common/cbtypes.h. These conflicted defines can lead to errors. Change-Id: Idad0794018bf0bd0e4e52a5aa062a12766d56c8e Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1592 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-19inteltool: improve the libpci test in the MakefileStefan Tauner
Use the verbatim variable method to define and export test code and the actual libpci test from flashrom. This improves readability and will work with stricter compiler (settings). Change-Id: Iace7d53b0b992c4fde596ce1d606ad715d6dfc2a Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1575 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-19inteltool: add support for 946GZ and 946PLStefan Tauner
Change-Id: Ied0ff16c16d8c2f04b55fe6b0a6ee38966d3c424 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1576 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-19inteltool: new definitions and cleanupStefan Tauner
- Separate host bridges/DRAM controllers from LPC controllers in supported_chips_list[]. - Refine some names and macros. - Clean up some whitespace errors. - Add IDs and names of 5, 6 and 7 Series southbridges and the three latest Core CPU families with integrated memory controllers but do not implement any pretty printing routines for them yet. The first generation Core family is already supported, although it was wrongly named after the PCH and used the wrong ID. Also, the BAR values have been mangled to 32b instead of 64b. Both errors have been fixed and most basic support for the other two generations was added. Change-Id: Ief81e57f7c065cafac52e48b6364b57c72fcdf95 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1574 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-16Update SeaBIOS stable to the release-1.7.1 commitPeter Stuge
Change-Id: I0dffe89c31e45914f795d9ad8efb787b5fdbb7a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/1583 Tested-by: build bot (Jenkins)
2012-10-14inteltool: remove bashism from MakefileStefan Tauner
&> is a bashism to redirect both outward streams (stdout and stderr), but with other shells this introduces a race condition with the rm command after it, because the compiler execution is done in the background/ in parallel. Found and tested with dash. Change-Id: I08516494828c9f7af168f954f2df027372657867 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1573 Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-14crossgcc: Allow the non-gnu tar and patch work on XxxBSDZheng Bao
For BSD, patch and tar are not default GNU. Add a work around to let the non-gun patch and tar work. Change-Id: I0a9d0bb0e535aa5e0dde146db330c3c8d7b4d8cb Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-14libpayload: CMOS access was implemented in a backward wayPatrick Georgi
Instead of having the highlevel functions make use of the lowlevel functions, it implemented the lowlevel stuff in terms of highlevel. Change-Id: I530bfe3cbc6f57a6294d86fbf1739e06467a2318 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1539 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-14abuild: allow building with no payloadPatrick Georgi
Change-Id: I167f0bb57bb40f0426182c0abe868bdad58eb120 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1563 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-10bachmann/ot200: Fix wrong IRQ number for PIRQDChristian Gmeiner
The used FPGA on the device triggers PIRQD for the membrane keyboard. The used linux driver for the keyboard uses the fixed IRQ number of 7. In order not to touch the linux driver and be compatible with proprietary BIOS change the irq_table in coreboot. Change-Id: If5bc929eb48bb1eafd401941ebb7d34cf5862c35 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/1571 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-10iei/kino-780am2: Turn on PCIe bridge to 2nd ethernet controller.Dave Frodin
Change-Id: I35fa94bafcf7c835081b57acf031a2fb334d353d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1570 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-08hpet: common ACPI generationPatrick Georgi
HPET's min ticks (minimum time between events to avoid losing interrupts) is chipset specific, so move it to Kconfig. Via also has a special base address, so move it as well. Apart from these (and the base address was already #defined), the table is very uniform. Change-Id: I848a2e2b0b16021c7ee5ba99097fa6a5886c3286 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1562 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-10-08Increment revision of SeaBIOS to remove bashismStefan Tauner
This enables building with dash again(?) by using exactly one patch of SeaBIOS more/newer than previously, which has also the sole purpose of removing bashism and is a single line change. *sigh* Change-Id: Ib036894d8b9886f74d6eb0853f1fc0ce1aa39d54 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1568 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-10-08Every chip must have chip_operationsKyösti Mälkki
Forcing this rule, chip_ops can be added in the static devicetree regardless of the existence of the chip.h files. Change-Id: Iec1c23484e85cab3f80a34f2b082088f38ac4de9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1472 Tested-by: build bot (Jenkins)
2012-10-07Take care of NULL chip_ops->nameKyösti Mälkki
Change-Id: I62b1c497d23ec2241efb963e7834728085824016 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1565 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-10-07Fix typo in mPGA603 socketKyösti Mälkki
Change-Id: I7a49d5fc13fb605a47c3c1662758ebd5935e7780 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1564 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-07Revert order in VGA device choiceKostr
Before change "Simplify VGA card discovery" (http://review.coreboot.org/#/c/1255/) coreboot was setting up VGA for the last found VGA device. After this change it setting up VGA for the first found. This change broke compatibility to my Supermicro H8QGI board. Revert order back to old to save compatibility for this board (and maybe any other boards) Change-Id: Id5f2be60f95298059651c26133806e2694ff60aa Signed-off-by: Kostr <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/1561 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-05Mainboard: Fix IO-HUB link number in Dinar mainboardKostr
According to file "northbridge.c" in family 15h code IO-HUB should be placed on link_lsit[0] in devicetree.cb. This hack in "northbridge.c" was made to satisfy both f10 and f15 cpu's. Change-Id: I4754235bd38239460347b0dc4a82cd4e58ae7cd0 Signed-off-by: Kostr <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/1540 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-05lint: Get absolute path in compare_outputZheng Bao
The classes in $(top)/Makefile uses $(abspath) to get the path. The $(abspath) can not resolve symlink. If the coreboot is located in a symlink directory, the run_printall produces the absolute path while the $PWD just produces the path with symlink. Use `pwd -P` to get the abs path. Change-Id: Icf6b364d030c14a9c78991767b17dafc701baf3c Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1551 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-05Provide access to smaller registers in eregsPatrick Georgi
This is in preparation for sharing interrupt handlers between YABEL and x86emu. Change-Id: Iff92c1d899b8ada20972731944341805a49b6326 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-05Use mainboard_interrupt_handlers everywherePatrick Georgi
The previous commit provides a mainboard_interrupt_handlers implementation YABEL with identical semantics to the x86emu one, so let's use it in both cases. This eliminates the need for the int15_install() indirection, so let's drop that, too. Generated using the following coccinelle patch and manual cleanups (empty #if/#endif): @@ type T; identifier FUNCARR; expression INT, HANDLER; @@ -typedef T yabel_handleIntFunc; -extern yabel_handleIntFunc FUNCARR[256]; -FUNCARR[INT] = HANDLER; +mainboard_interrupt_handlers(INT, &HANDLER); @@ @@ -void int15_install(void) -{ -mainboard_interrupt_handlers(0x15, &int15_handler); -} @@ @@ -void int15_install(void) -{ -mainboard_interrupt_handlers(0x15, &int15_handler); ... mainboard_interrupt_handlers(0x15, &int15_handler); -} @@ @@ -int15_install(); +mainboard_interrupt_handlers(0x15, &int15_handler); Change-Id: I70fd780d7ebf1564a2ff7d7148411673f6de113c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1559 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-05YABEL: Common API to register interrupt handlersPatrick Georgi
Provide (mostly) the same API for registering interrupt handlers as with x86emu. Change-Id: I1364b08d9043039550786a1758508ae088813aa3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1558 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-04add tyan s8226: add a new mainboardSiyuan Wang
our code supports tyan s8226 now, which has two cpus on the board the cpu socket is C32. The details of tyan s8226 is: http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190 the test result of this mainboard is: 1) boot Ubunbu 11.10, kernel 3.0.9. there is no err and warnings in dmesg. 2) boot windows7 x64 successfully. 3) use fwts to test the bios, there are 268 pass and 14 failed 4) pcie and usb slots are ok. 5) all network interfaces are ok. Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1495 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-04lint: Stop searching when one GNUmake is foundZheng Bao
After make 3.81 is copied to /usr/local/bin, the old make 3.80, which doesn't work for coreboot, will replace $MAKE with gnumake. That is not we want. Change-Id: I87fbe95c70228a22f2c233ff071df29639b63726 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1550 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-04pirq_routing: Allow routing with more than 4 PIRQ linksAlexandru Gagniuc
pirq_routing_irqs assumed that only four links are available for PIRQ routing, INTA to INTD. Some chipsets provide more, up to INTH. When pirq_routing_irqs found a link number greater than 4 in the pirq table, it would not assign that IRQ. This is a shame, as it limits the flexibility of routing IRQs. Make the maximum number of links a Kconfig variable, and modify the code to respect it. This works beatifully on the VX900, which provides 8 routable interrupts. While we're at it, also refactor pirq_routing_irqs, and add some much needed comments. Rename pirq_routing_irqs to pirq_route_irqs to demistify the role of this function. The copyrights added were determined from git log filename. Change-Id: I4b565315404c65b871406f616474e2cc9e6e013e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1482 Tested-by: build bot (Jenkins)
2012-10-03libpayload: Set 8bits per char for serial portAnton Kochkov
Previously we assume that hardware using 8 bits per char by default, but on Asrock A53 Pro this is not true (7 bit per char by default). Forcing use 8n1 now. Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1541 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-03superiotool: Fix for FreeBSDAndriy Gapon
Makefile still used SVNDEF on FreeBSD. Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1554 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-03libpayload: UHCI driver contained too much magicPatrick Georgi
The handling of finalize in uhci_bulk was confusing, and so its behaviour changed. If set, the driver is supposed to add a trailing empty packet iff the last packet is of maximum packet size. This helps the device to decide if the transfer is completed simply by waiting for a packet that isn't full length. Change-Id: I162e8c1e034924d0de6fdcb971c94cf3a5ea31eb Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1555 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-03buildsystem: ensure directory exists before usePatrick Georgi
In some cases we request mktemp to create a temporary file in $(obj)/mainboard/... before it exists. Let's make sure the directory exists Change-Id: I51f0065c30b1f25eb501a6fd5edefb3f4c15d0ab Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1532 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-02Fix compilation without CONFIG_WRITE_HIGH_TABLES.Denis 'GNUtoo' Carikli
Without that fix we have: CC boot/hardwaremain.ramstage.o src/boot/hardwaremain.c: In function 'hardwaremain': src/boot/hardwaremain.c:136:6: error: 'cbmem_post_handling' undeclared (first use in this function) src/boot/hardwaremain.c:136:6: note: each undeclared identifier is reported only once for each function it appears in src/boot/hardwaremain.c:137:3: error: implicit declaration of function 'cbmem_post_handling' [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make: *** [build/boot/hardwaremain.ramstage.o] Error 1 When compiling without CONFIG_WRITE_HIGH_TABLES Change-Id: Ie45f684a6db0ab55ef469bfcef57e539ae7e994c Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/1533 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:35:49 +0000