summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-04security/vboot: Guard google_chromeec_reboot by if clauseDaisuke Nojiri
794d222886 "cr50_enable_update: Add printk before EC hibernate" inserted printk and kicked out google_chromeec_reboot from the if-clause. This patch fixes it. BUG=none BRANCH=none TEST=none Change-Id: I058e929e2acd883d2265b2ab019743e3849cb3af Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-04amd/stoneyridge: Transfer functions from early_setup.c to southbridge.cRichard Spiegel
In preparation to deleting early_setup,c, transfer all functions except those related to wide IO to southbridge.c. BUG=b:64033893 TEST=Build and boot to OS. Change-Id: Ibe1d87cb3e0eb3e8ed4d2dc2adbddf2e13557c9e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-04mb/google/fizz: Enable Wake-on-Lan featureGaggery Tsai
This patch enables WOL feature. BUG=b:69290148 BRANCH=None TEST=powerd_dbus_suspend && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL packet. Change-Id: I1178a776db2cdb448fe6650d49ae6c0281ac1128 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-03ec/lenovo/h8/acpi: Fix regression (MS Windows crash on boot)Patrick Rudolph
Fix a regression introduced by #21227 0709dc04 (ec/lenovo/h8/acpi/thermal: Add ACPI fan control). The commit caused Windows to crash as EC reads aren't allowed in the fan device or it's powerresource's methods. Implement the same approach as all other platforms using a GNVS variable named FLVL instead of reading from EC. In addition to EC reads writing to FIELD elements, in another ACPI scope, seems to be broken. Introduce a new method to set the fan disengage mode. Tested on Windows 7 and Lenovo T500. Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-12-03sb/intel: Replace DTS2 with FLVLPatrick Rudolph
Replace the unused DTS2 field with FLVL (fan level). Required to use the fan level on all thinkpads to store and retrieve the current fan level. Possible additional use case is to modify the fan level from a SMI handler. Change-Id: I1ee5348d24b018ab1b61067813c1db63d6706c12 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22513 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-12-02google/reef: Fix whitespace inconsistency in coral codePatrick Georgi
BUG=none BRANCH=none TEST=none Change-Id: I4e61f1327027c5100773e2b837f439a939807e72 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02google/reef: add more USB tuning for coral variantsPatrick Georgi
Lava numbers are in. BUG=b:69990330 BRANCH=none TEST=verified that USB signal is within spec Change-Id: I7416ec8d058271700ebe43f8d92af61c6c0d6b42 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02winbond/w83977tf: Add ACPI declarationsKeith Hui
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Change-Id: If113807901619bc0f4250607546be415f9e5e45b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-02soc/intel/apollolake: Add PNP configDivya Chellap
1. Programs PNP values for AUNIT, BUNIT & TUNIT registers as per reference code. 2. A new configuration option pnp_settings is introduced in devicetree.cb to select PNP settings among performance, power, power & performance. TEST = built and booted glkrvp, verfied that the callback gets control, verified warm and cold reboots. Change-Id: Ibd70a42c9406941c8a93cc972f22c2475e9d0200 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-02arch/riscv: Remove supervisor_trap_entryJonathan Neuschäfer
coreboot only maintains a single trap entry, because it only runs in machine mode. Change-Id: I7324d9c8897d5c4e9d4784e7bc2a055890eab698 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02riscv: Remove config string supportJonathan Neuschäfer
The code dealing with the old config string isn't needed anymore, because the config string has been deprecated in favor of OpenFirmware-derived devicetrees. Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove the current SBI implementationJonathan Neuschäfer
This Supervisor Binary Interface, which is based on a page of code that's provided to operating systems by the M-mode software, has been superseded by a different (currently not really documented) SBI, which is based on directly executing ECALLs instructions. Thus some of our code becomes obsolete. Just rip it out until we implement the new SBI. Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Return from trap_handler instead of jumping outJonathan Neuschäfer
Change-Id: I8dbed5dbe377d3a02e58a3bc16a1ee112b28bea9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Unify trap returnJonathan Neuschäfer
Change-Id: I9de0c92b3f925e8f4db00d7281222a07db68b2ae Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02soc/intel/cannonlake: Initialize PMC controllerSubrata Banik
PMC controller gets hidden during FSP-Silicon initialization using sideband interface on CannonLake platform. Hence accessing PWRMBASE using PCI config space will return invalid BAR value as 0xFFFFF000. Also PMC PCI driver will not be able to initialize PMC controller as its not showing over PCI bus. coreboot PCI enumeration log shows: PCI: Static device PCI: 00:1f.2 not found, disabling it. This patch ensures PMC controller is getting initialized using boot state machine right after FSP Silicon Init returns (BS_DEV_INIT_CHIPS/ BS_ON_EXIT). TEST=Ensures PWRMBASE address is 0xFE000000 and PMC controller is getting initialized during BS_DEV_INIT_CHIPES/BS_ON_EXIT. Change-Id: Ife7389f0f035b66837aace89d6e6b866e494cbe4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02soc/intel/common/block: Add Intel common PMC controller support for KBL, APLSubrata Banik
SoC needs to select specific macros to compile commom PMC code. TEST=Build and boot KBL (soraka/eve), APL (reef) Change-Id: Iacc8da986c01e9ac7516643dafc6d932ebe0ee5e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-02mainboard/google/kahlee: Remove usb_oc.asl filesMartin Roth
These files aren't needed for the overcurrent functionality. BUG=b:69305596, b:69229635 TEST=Build Grunt & Kahlee. Overcurrent wasn't yet enabled so no other testing was needed. Change-Id: I8dcd50a249e387ccf1142949b359cee09942460a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02mainboard/google/kahlee: Add Baseboard GPIOsMartin Roth
Add initial baseboard GPIOs based on grunt schematics. BUG=b:69305596 TEST=Build grunt Change-Id: I4efcee7dbf54fb9ea82e5e9394db805bb69203c8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02soc/amd/stoneyridge: Add GPIO40 to GPIO listMartin Roth
GPIO40 is a valid GPIO for the Stoney FT4 package, so add it to the list of GPIOs. BUG=b:69305596 TEST=Build Kahlee & Grunt Change-Id: I20fce60ff1a61761b907518c0a6e1685a17f2886 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-02soc/amd/stoneyridge: Add RunOnAP supportMarc Jones
Add support for AGESA callbacks RunFcnOnAp() and RunFcnOnAllAp(). Update the wording on the AP errors. The functions are not missing, they are not supported. BUG= b:66690176 BRANCH=none TEST=Check serial output for the AP calls from AGESA. Change-Id: Id30cb2e0c6cc474158f3a7710dbb8ecf54f1ffe4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-01mainboard/google/kahlee: Update Kconfig string used in makefilesMartin Roth
Update the variable ${CONFIG_VARIANT_DIR} to use parens instead. Either is valid, but since we use parentheses everywhere else, it's better to be consistent. BUG=b:69691210 TEST=Build grunt & kahlee Change-Id: Ieffabaae5516a893f1dc1f7195a17c4cdeae8853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22656 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-01amd/stoneyridge: Update def_callouts.c to reset using reset.cMartin Roth
Convert functionality to use coreboot-centric functions and defined values. This change should have no functional effect. BUG=b:62241048 TEST=Build Gardenia; Build & boot Kahlee. Change-Id: I62ae50af05d3ac770560368245c4ae81cf9c4395 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-01soc/amd/stoney: clean up and update reset.cMartin Roth
- Move #defines to soc/northbridge.h, add other reset definitions to soc/southbridge.h. - Clean up file to use definitions instead of magic numbers. - Add do_soft_reset() BUG=b:69224851 TEST=Build gardenia; Build & boot Kahlee Change-Id: I0cc4c04b53b7fec38d45e962ff1292d8c717269c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22439 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-30nuvoton/nct5572d: Disable mouse controller also during resumePaul Menzel
Currently, having a keyboard connected to the PS/2 controller of the ASRock E350M1, after suspending and resuming the system, the keyboard does not work anymore. A similar problem is documented in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect) [1]. There is no reason to not disable the controller during resume. Also, that way, the PS2 ASL method does not need to be overriden. [1] https://review.coreboot.org/13165 TEST=Resume system, and notice PS/2 keyboard works. Change-Id: I51dc446861120f80bc9ffc4cc54b86e317d99689 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30superio: Log if mouse controller is disabledPaul Menzel
It’s useful to know, if the mouse controller is disabled or not, so convert the comment to a log message. Change-Id: Ic3f7d5b7b98cf8c258a6a601f4a44ce403f4a576 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30vx900/chrome9hd: fix a trivial typoLubomir Rintel
Change-Id: Ibfe6a6dc63454deacfd12de6dad2d6a792474f55 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/22270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30mb/google/poppy/variants/nautilus: Disable DPTFFurquan Shaikh
This change disables DPTF until the support is properly added in dptf.asl Change-Id: I68f2442e00718a4edbb34661d31d3a415d41c29f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30amd/{hudson,stoneyridge}: fix out of bounds readRichard Spiegel
southbridge/amd/pi/hudson/imc.c procedure enable_imc_thermal_zone was identified by coverity as having out of bounds access. Copies of the procedure are present in southbridge/amd/agesa/hudson/imc.c and in soc/amd/stoneyridge/imc.c. Fix the procedure in all 3 files. Fixes coverity CID 1260807: Out-of-bounds read. BUG=b:69835834 TEST=Build and platform boot to OS Change-Id: Ic16edc607358b9a688151735e6fcb3393d3bce80 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30payloads/external: Use stable version of GRUB2 by defaultJonathan Neuschäfer
Using the stable version by default is consistent with payloads/external/SeaBIOS. Change-Id: I444ba2daaf5ecc5edde907a7842013f88e1c4c9b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30payloads/external: Add a stable version of GRUB2Jonathan Neuschäfer
This should make reproducible builds of coreboot with GRUB2 easier. Change-Id: If855042945ab34f34c554e7490c811ec7b256980 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30mainboard/google/fizz: Disable DPTF active policyDavid Wu
Use EC to perform FAN control. BUG=b:67487721,b:69404739,b:64439568 BRANCH=master TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: I3394d3af9cbdb3eab1f18254909f60e2704735c3 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-30mainboard/compulab: add support for CompuLab Intense-PCHal Martin
Add coreboot support for CompuLab Intense-PC (Ivy Bridge) Modifications: - Memory SPDs have been fixed to detect both installed SODIMM modules - Full-height Mini-PCIe slot defaults to PCIe mode - mSATA can be chosen instead of mPCIe via Kconfig option ENABLE_MSATA Tested (Xubuntu 17.10/Linux 4.13 where applicable): - 2+2GB DDR3-1600 SODIMMs pass memtest - 4+4GB DDR3-1600 SODIMMs pass memtest - 4+8GB DDR3-1333 SODIMMs pass memtest - 8+8GB DDR3-1333 SODIMMs pass memtest - Booting via USB working (with no SATA HDD present) - Booting to main SATA HDD working - DisplayPort and HDMI output working for coreboot init (*requires* VGA BIOS) - DisplayPort and HDMI dual-head working in Linux - Mini-PCIe devices (half/full-height) detected in Linux - mSATA working (when chosen using ENABLE_MSATA) - Onboard Intel 82579 GbE working - Secondary Realtek 8111 GbE working - Rear eSATA ports working - Onboard analog audio output working - HDMI audio output working - USB 3.0 working - Suspend to RAM (S3) working, but not tested extensively - Mini PCIe WiFi - FACE module FM-4USB (4 USB 2.0 ports) Disabled/unsupported: - TPM (BTO option, not included in base config) - FACE modules: - FM-USB3 (USB 3.0/mSATA) NOT SUPPORTED/TESTED - FM-SER (serial) NOT SUPPORTED/TESTED - FM-XTDEU2/4 (LAN) NOT SUPPORTED/TESTED - FM-XTDE4U2/4 (Quad LAN) NOT SUPPORTED/TESTED - FM-XTDM2 (dual mPCIe) NOT SUPPORTED/TESTED - FM-VC (video capture) NOT SUPPORTED/TESTED - FM-POE (Quad LAN w/PoE) NOT SUPPORTED/TESTED Not tested: - RS-232 Product information: http://www.fit-pc.com/web/products/intense-pc/ Change-Id: I741b0b2f87eb9147c375b405a5b6989a10c7ad0a Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30intel: Replace msr(0x198) with msr(IA32_PERF_STATUS)Elyes HAOUAS
Change-Id: I22241427d1405de2e2eb2b3cfb029f3ce2c8dace Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-30util/intelmetool: Fix some platformsPatrick Rudolph
Bootguard: * Fix Mac support (ME_version can't be detected) * Skip MSR read on older platforms (as it would fail anyway) * Refactor MSR error handling * Print Bootguard state "Unknown" on MSR read error Change-Id: Iafe3f5c22c6caeedc556933405b9f6d83ec876a1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30crossgcc: fix edk2 tools_def templatePatrick Georgi
Forgot the /bin/ part of the executable paths Change-Id: I87d63ec18338e376787d02bb771471e746a17b62 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22640 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeCSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I6246300a4376a0194950d4de277af040b10b6c1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/skylake: Set low maximum temperature threshold for Thermal DeviceSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I94d09a28bf1ea07a53cfa04c54752358bafca610 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30mb/google/nautilus: add synaptics touch screen supportChris Wang
Add synaptics touchscreen in the device tree so that the correct ACPI device is created. BUG=b:66462881 BRANCH=master TEST=compiled/verify the touchscreen works Change-Id: I6e89a5db0e9f8ae777eed661f3bf89d653a937e6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/{APL,GLK}: Use Intel SRAM common codeV Sowmya
TEST:Build and boot reef. Verified that SRAM common code is used to set the resources. Change-Id: If9f5d400df09b4a0aa4b464d7f1f24320696b0aa Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30soc/intel/common: Add Intel SRAM common code supportV Sowmya
Add SRAM code support in intel/common/block to read and use fixed resources on BAR0 and BAR2 for SRAM. Change-Id: I7870a3ca09ac7b57eb551d5eb42d8361d22f362a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22607 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30chromeec: Notify CREC device of wakeup eventsFurquan Shaikh
Whenever there is a new EC event that could be wake-capable, notify CREC device of this using notification value 0x2 i.e. device wake. This allows Linux kernel to track active_count value correctly for CREC device. BUG=b:69118395 BRANCH=None TEST=Verified on Soraka: 1. Put device into suspend 2. Wake up using mode change/lid open 3. Check that the active_count for GOOG0004 has increased (cat wakeup_sources | grep GOOG0004) Change-Id: I723f7f4e4c99e7a5b57c6296da66cf30cd413c27 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-29soc/amd/stoneyridge: Add mainboard call for SPD valuesMarc Jones
Add a mainboard function call to write the AGESA SPD buffer. Removes the unneccesary dimm_spd.c file. BUG=b:67845441 Change-Id: Id42622008b49b4559e648a7fa1bfd9f26e1f56a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Add SPD functionMarc Jones
Add the mainboard_spd_read function in romstage and call the variants function. Grunt is the baseboard and has soldered down memory, so add it for the default weak SPD functions and build the SPDs in cbfs. Kahlee overrides the weak SPD function and falls back to the soc I2C SPD functions. BUG=b:67845441 TEST=Build and boot Kahlee. Change-Id: I789002bfadc1a2b24f9046708986d29c0e2daf33 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29google/kahlee: Rename board_id to memory_skuMarc Jones
The GPIOs used in board_id are meant to indicate the memory configuration. Rename board_id to memory_skus. Report the board_id received from the EC. BUG=b:69649438 Change-Id: I84bacead3daf829c97f595c4c11a243953243c29 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22561 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29mb/google/poppy/variants/nautilus: Disable camera devicesFurquan Shaikh
This change disables camera devices until camera support is properly added for nautilus. Change-Id: I7de37cbf9c32fa063f55a2e54986e33b66acfa3b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-29mb/google/poppy: Add variant support for camera aslFurquan Shaikh
This change adds infrastructure to allow variants to define their own camera.asl file. - Poppy and soraka use the one provided by baseboard. - Dummy file is added for nautilus since it does not have camera support enabled yet. TEST=Verified that DSDT table remains the same with and without this change. Change-Id: I0f0b489e74739aa4708283d58d8b7626b77a89a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28soc/intel/skylake: Make use of Intel common DSP blockSubrata Banik
TEST=Build and boot soraka/eve. Change-Id: I8be2a90dc4e4c5eb196af57045d2a46b7f0c9722 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28google/scarlet: support kd097d04 panelLin Huang
Support kd097d04 dual mipi panel on Scarlet. Change-Id: Ie8bc0cbb79840f1924a8cc111f2511292203731f Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28google/gru: correct backlight gpioLin Huang
it uses backlight enable pin as backlight gpio currently, correct it and define the right backlight gpio. Change-Id: I7c5abfd5bbbae015b899f3edc8892ea32bf82463 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
Refactor the mipi driver, so we can support dual mipi panel. And pass the panel data from mainboard.c, that we can support different panel with different board. Change-Id: Id1286c0ccbe50c89514c8daee66439116d3f1ca4 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: properly configure PHY timingLin Huang
These values are specified as constant time periods but the PHY configuration is in terms of the current lane byte clock so using constant values guarantees that the timings will be outside the specification with some display configurations. Derive the necessary configuration from the byte clock in order to ensure that the PHY configuration is correct. Change-Id: I396029956730907a33babe39c6a171f2fcea9dcd Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: improve mipi transfer flowLin Huang
check GEN_CMD_FULL status before transfer, check GEN_CMD_EMPTY and GEN_PLD_W_EMPTY status after transfer. Change-Id: I936c0d888b10f13141519f95ac7bcae3e15e95d9 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct Feedback divider settingLin Huang
This patch correct Feedback divider setting: 1. Due to the use of a "by 2 pre-scaler," the range of the feedback multiplication Feedback divider is limited to even division numbers, and Feedback divider must be greater than 12, less than 1000. 2. Make the previously configured Feedback divider(LSB) factors effective Change-Id: Ic7c5c59be1d00c65c3b17cb3c4bfba8d7459e960 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct phy parameter settingLin Huang
As MIPI PHY document show, icpctrl<3..0> and lpfctrl<5..0> should depend on frequency, so fix it. Change-Id: Ic4a90767bd1f22d5d784d4013dc7afb3149115c1 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: Fix LOOP_DIV_HIGH_SEL to be 4 bits wideLin Huang
Accroding to datasheet, feedback divider register high value is only 4 bit, it currently uses 5 bit, so correct it. Change-Id: I1fe9fc076b712f27407c5f2735b15e64fb55e72e Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28mb/google/poppy/variants/nautilus: set I2C speed to 400KHzChris Wang
Add "speed_config" for each I2C port configuration to set speed to 400KHz. BRANCH=master BUG=none TEST=compiled/verified Change-Id: Icb48733b87cefc92577547b1eab661a8cbb12be6 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22589 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-28mb/google/poppy/variants/nautilus: Change IA/GT/SA slow slew rate settingsChris Wang
Change IA/GT/SA slow slew rate settings. System's audible noise will be reduced with them. - Slow slew rate for IA/GT/SA : fast/16 - Fast PKG C-state ramp for IA/GT/SA: disabled BRANCH=master BUG=none TEST=compiled/verified Change-Id: Ibf11aba7bafb3b02c510905d7d904507eee6394b Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-28spi/tpm.c do not waste time on wake pulses unless necessaryVadim Bendebury
The Cr50 secure chip implementation is guaranteed not to fall asleep for 1 second after any SPI slave activity. Let's not waste time on the wake up ping when it is not necessary. BRANCH=cr50 BUG=b:68012381 TEST=using a protocol analyzer verified that the wake pulses are generated only when the new coreboot stage or depthcharge start, not on every SPI slave transaction. Change-Id: Id8def1470ba3eab533075b9e7180f8a58e0b00b6 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28payloads/seabios: Update stable from 1.10.3 to 1.11.0Martin Kepplinger
SeaBIOS 1.11.0 was released on November 10th, 2017. Changes include * Initial support for NVME drives * Support for vga emulation over a serial port in SeaBIOS (sercon) * Support for serial debugging using MMIO based serial ports * Support for scsi devices with multiple LUNs * Support for boot-to-boot persistent coreboot cbmem logs * Improved coreboot vga (cbvga) mode setting compatibility * Several bug fixes and code cleanups See also https://www.seabios.org/Releases#SeaBIOS_1.11.0 and for all details on the changes, use git log --oneline rel-1.10.3..rel-1.11.0 in the SeaBIOS repository. Change-Id: Ie46a526593177c5241fbd979c7fa1934478f7382 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/22429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Vasya Boytsov <vasiliy.boytsov@phystech.edu> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-11-28intel/common/block: Add SKL CSME device IDSubrata Banik
This patch ensures SKL code is using CSME common PCI driver. TEST=Build and boot soraka/eve. Change-Id: Ic229c60e434d83eb4a3e5392ce90a7d47fddbd73 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28util/crossgcc: Install a template for the edk2 build systemPatrick Georgi
Add a CBSDK tool set template that can be used in edk2 simply by appending $prefix/share/edk2config/tools_def.txt to Conf/tools_def.txt. After that, build -t CBSDK uses the coreboot compilers, providing a more predictable compiler choice. Change-Id: I76b38c928b831ee6f31450aa0ad59b4f906f394d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-28mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_tableDivya Chellap
On shutdown, Soraka enters Deep S5 and not S5 state. Setting pad reset config of a gpio to RSMRST will not preserve the gpio config across deepSx and the gpio should be configured again. The WLAN_PE_RST signal should be brought up early in the bootflow for giving the device enough time to initialized before PCIE init in FSP-S. Hence, the gpio WLAN_PE_RST (GPP_B8) pad configuration is done in early pad configuration in bootblock also. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S5, S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I5c7a4a3871a3bff69c1136379c78a8368c6258a6 Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-28AMD platforms: Fix ASL comment that implies "\_SB" is southbridgeMartin Roth
Change-Id: I6ee86396a1c5aaee248a275b42da801cedace586 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-28mb/google/poppy/variants/nautilus: correct the SIO_EC_ENABLE_P2SK typoChris Wang
correct the typo from SIO_EC_ENABLE_P2SK to SIO_EC_ENABLE_PS2K. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Iaded458e202bc975c73cd295f7b363e2c9bfa861 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mb/google/poppy/variants/nautilus: remove ALS for nautilusChris Wang
nautilus doesn't support ALS. remove the definition from ec.h. BRANCH=master BUG=b:66462881 TEST=compiled/boot to ChromeOS. Change-Id: Ib357328799015f78b18cd260db221e524e98cef7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-28mainboard/google/kahlee: Update Grunt for 16MB ROM chipMartin Roth
- Update Grunt to 16MB chip in Kconfig. - Move chromeos.fmd into variant directory & update Kconfig with the new location. - Add Grunt specific chromeos.fmd file. BUG=b:69691210 TEST=Build grunt; Build & Boot Kahlee Change-Id: I8d2f5e3255984d0d9a18df560f84f6db03b73a78 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-28mainboard/google/kahlee: Update chromeos.fmdMartin Roth
- Remove SI_ALL section. This is no longer needed as the PSP dirctory is placed into the RO coreboot section. - Add 1MB Legacy section. - Add Memory cache section. These sections are called "MRC", which is an Intel term, but AMD platforms will use the same regions for saving the same sort of data. BUG=b:65497959, b:67035984 TEST=Build & boot kahlee Change-Id: I5e41a0aa6bd4b29b8014c6559126a29cd7ed45d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-27google/fizz: correct memory rcomp settingsKane Chen
Follow the schematic and Doc 573387 to correct the rcomp and rcomp target settings for fizz TEST= boot ok and the system can enter and resume from S3. Change-Id: Iffa90461509cfadaca20e335a6655e549e79e749 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-27drivers/net: add SSDT ACPI declaration and WOL featureGaggery Tsai
This patch adds SSDT ACPI generator and declares _UID, _HID, _DDN and also _PRW for WOL feature. Besides, adds a wake variable in chip information. BUG=b:69290148 BRANCH=None TEST=Add register "wake" = "GPE0_PCI_EXP" in devicetree under r8168 chip driver && dump SSDT to make sure _UID, _HID, _DDN and _PRW are filled correctly && put system into S3 && sudo etherwake -i eth0 $MAC to make sure the system could be woken up by WOL package. Change-Id: Ibc9115e8a08ba2bfcb3ee1e34c73cf1976a6ba2d Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25util/intelmetool: Add bootguard information dump supportPhilipp Deppenwiese
With this implementation it's possible to detect the state of bootguard in intel based systems. Currently it's WIP and in a testphase. Handle it with care! Changes done: * Add support for reading msr * Read ME firmware version * Print bootguard state for ME > 9.1 * Make argument -s legacy * Add argument -b for bootguard (and ME) dumping * Add argument -m for ME dumping * Opt out early if CPU is non Intel Change-Id: Ifeec8e20fa8efc35d7db4c6a84be1f118dccfc4a Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/16328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-25util/intelmetool: Fix lint errors and warningsPatrick Rudolph
Clean the code to fix all errors and warnings. No functional change. Changes: * Fix lines over 80chars * Fix typos * Restructure code to reduce indent level * Move RCBA handling into own files * Introduce helper functions for RCBA access * Move GPL string into header * Fix whitespace in macros Change-Id: Ib8e3617ebb34c47959d6619dfbc7189045e6b8f7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-25google/fizz: Remove tpm i2c configs from KconfigShelley Chen
We are disabling tpm over i2c, so the configs are not needed anymore. BUG=b:65056998 BRANCH=None TEST=emerge fizz and make sure can still boot up. Change-Id: Id88f32fa952801749544534442fc15d85fc1a892 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-25google/fizz: Disable unused i2c linesShelley Chen
As cr50 has now switched to using SPI, no need to enable the i2c1 anymore. Additionally, disabled unused I2C devices -- I2C0, I2C2 and I2C3. BUG=b:69374421 BRANCH=None TEST=test on fizz celeron. Make sure /dev/tpm0 created on (many) reboots. cat /proc/interrupts. Make sure # interrupts for 16 after booting is reasonable (not > 10k) and idma64.0, i2c_designware.0 are not listed with that interrupt line anymore. Should look something like this: 16: 1174 0 IO-APIC 16-fasteoi i801_smbus, snd_soc_skl, AudioDSP Change-Id: Iac3e31264a937a1d7ed6bd41632e7e065317781b Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-23soc/intel/cannonlake: Add PM methods to power gate SD card controllerVaibhav Shankar
When system enters S0ix, system fails to power gate SD card controller. This patch implements PM methods to put the SD card controller in D3 during S0ix entry. TEST=Suspend and resume using 'echo freeze > /sys/power/state'. The System should not be blocked by sd card controller. Change-Id: I9a9fe14fb6cd3b76ee95c565b3359cdae1a3c445 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-23google mainboards: select SYSTEM_TYPE_LAPTOP where appropriateMatt DeVillier
Some Google boards are missing this selection, leading them to being incorrectly identified as type 'Desktop' in SMBIOS type 3 table. Correct this by adding 'select SYSTEM_TYPE_LAPTOP' to the boards' Kconfigs. TEST: boot Linux and check correct chassis type listed via dmidecode Change-Id: Ib1145e314812a3f300cfd1a435a687aa0862158a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23src/mainboard: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: Ia5a9acae4fbe2627017743106d9326a14c99a225 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-23soc/intel/cannonlake: Invoke pmc and hard reset only if CSE fails to resetJohn Zhao
If CSE fails to do a global reset with the calling sequence of heci reset/send/receive, then invoke pmc and hard reset. TEST= Force global reset from early or late romstage. The function send_heci_reset_message has the calling sequence of heci reset/send/receive. It is observed timed out error (associated with heci_receive) occurs only if global reset is forced during early romstage. If global reset is trigged at late stage (i.e, after fsp_memory_init), then no timed out error and CSE handles reset properly. Change-Id: I5bb12554e5745d7704a1b684a3a51034bb35f787 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-23sb/intel/i82801jx: Store initial timestamp in bootblockArthur Heymans
The function to fetch this timestamp is already present. Change-Id: I760aea8a867339764be9ca627b2ccdff4fd18e30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-23sb/intel/i82801ix: fetch initial timestamp in bootblockArthur Heymans
TESTED on Thinkpad x200 Change-Id: I3cd286709f8734793dc6ae303215433eff29d25b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-23google/fizz: Define smbios_mainboard_sku to return OEM IDsShelley Chen
Currently, mosys just returns "fizz" as model/chassis values. Returning proper OEM IDs so that mosys can return the proper variant. BUG=b:67732053 BRANCH=None TEST=mosys platform model; mosys platform chassis; Make sure returns the right variant string and not fizz. Change-Id: I42e293e833b0f7c9870dc275561ad13256836e60 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-23soc/amd/common: Include appropriate headers in dimm_spd.hMarc Jones
Change-Id: I69e8eaffefbda4fdfb89264a55762558950aa5e2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22547 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23soc/amd/stoneyridge: Get entire DDR4 SPDMarc Jones
Set the SPD size to 512 to get the entire DDR4 SPD. Change-Id: I0bdf8101de22533b2f4337d3c9e4423d62e6c66d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
ChromeEC is getting ready to bump up the hostevents and wake masks to 64-bits. The current commands to program hostevents/wake masks will still operate on 32-bits only. A new EC host command will be added to handle 64-bit hostevents/wake masks. In order to prevent individual callers in coreboot from worrying about 32-bit/64-bit, the same API provided by google/chromeec will be updated to accept 64-bit parameters and return 64-bit values. Internally, host command handlers will take care of masking these parameters/return values to appropriate 32-bit/64-bit values. BUG=b:69329196 Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22google/gru: Add support for rainierEge Mihmanli
Rainier is a scarlet-derived board but uses eDP as opposed to MIPI. Using GRU_BASEBOARD_SCARLET is enough, except for display related logic. In those cases, use board specific logic instead of baseboard. Change-Id: I596f7ca6bc26312ecaeb261c96cebd46974c2cdf Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/22542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-22vendorcode/amd/pi/00670F00: Halt build if headers aren't wrappedMartin Roth
Make sure that AGESA headers don't get pulled directly into coreboot files again. BUG=b:66818758 TEST=Build gardenia; Build & boot kahlee; Include AGESA.h into files verify that the build fails. Change-Id: I8d6d94872ebf76a9df2850ed0452cf6b1a446ffd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22vendorcode/amd/pi/00670F00: Remove direct AGESA header includesMartin Roth
Update amdlib to pull in the AGESA headers through agesa_headers.h BUG=b:66818758 TEST=Build gardenia; Build & boot kahlee Change-Id: I3a2a2fde9738a9fe7a0b55cb91c29416cdc227a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22Create SOC description file soc.aslRichard Spiegel
Request from commit 519680948b (move carrizo_fch.asl code to soc), merge several includes into a single file in soc directory. Rename soc_fch.asl to sb_fch.asl. Rename fch.asl to sb_pci0_fch.asl. Then copy the required section from dsdt.asl into a new soc.asl. Affected boards: amd/gardenia and google/kahlee. BUG=b:69368752 Change-Id: I83d850cf9457f7c2c787336823d993ae2e9d28ce Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22541 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-22build system: drop duplicate rule for $(objutil)/blobtool/blobtoolPatrick Georgi
There's already one in util/blobtool/Makefile.inc BUG=chromium:787042 TEST=no more warning about duplicate rules Change-Id: I8bc17d3b182369cf5b67bdcf392db7932e5389bf Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22555 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-22drivers/i2c/tpm/cr50: Simplify and increase init delay to 30 secondsDuncan Laurie
The Cr50 i2c driver provides separate entry points for probing and initialization, but probing function does not really do much. It also claims and releases locality on every coreboot stage, but there is no need for this - locality should be definitely claimed after reset and then it could be retained through the boot process. On top of that the driver does not properly account for long time it could take the Cr50 chip to come around to reset processing if TPM reset request was posted during a lengthy TPM operation. This patch addresses the issues as follows: - tpm_vendor_probe() and tpm_vendor_cleanup() become noops, kept around to conform to the expected driver API. - tpm_vendor_init() invokes a function to process TPM reset only in the first stage using TPM (typically verstage), the function checks if locality is claimed and if so - waits for it to be released, which indicates that TPM reset processing is over. - before claiming locality check if it is already taken, and if so - just proceed. BRANCH=none BUG=b:65867313, b:68729265 TEST=Verified that reef no longer hangs during EC reboot and firmware_Cr50ClearTPMOwner (not yet merged) tests. Change-Id: Iba8445caf1342e3a5fefcb2664b0759a1a8e84e3 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-21spi/tpm: claim locality just once during bootVadim Bendebury
All coreboot stages using TPM start with the same sequence: check if locality is claimed, if so, release it by writing 'active locality' bit, then try claiming it. This is actually not a proper procedure: section "5.5.2.3.1 Command Aborts" of "TCG PC Client Platform TPM Profile (PTP) Specification Level 00 Revision 00.430 Family 2" lists overwriting active locality status bit as a means of triggering TPM command abort. On top of that, none of the coreboot stages releases locality, it is enough to claim it once when device starts booting. In fact, locality being active when the device is in verstage is most likely due to delayed TPM reset processing by the Cr50 TPM: reset is an asynchronous event, and is processed once current command processing completes. The proper procedure is to wait if locality is active until it is released (which will happen when Cr50 processes reset) and then proceed to claim it. This needs to happen only during verstage, other stages using TPM are guaranteed has been claimed earlier. BRANCH=gru BUG=b:65867313 TEST=the new autotest triggering EC reset during key generation process does not cause boot failures on Fizz device any more. Below are times verstage had to wait: TPM ready after 3132 ms TPM ready after 22120 ms TPM ready after 4936 ms TPM ready after 6445 ms TPM ready after 11798 ms TPM ready after 27421 ms TPM ready after 4582 ms TPM ready after 7532 ms TPM ready after 27920 ms TPM ready after 3539 ms TPM ready after 12557 ms TPM ready after 6773 ms TPM ready after 1631 ms TPM ready after 197 ms TPM ready after 24330 ms TPM ready after 3241 ms Change-Id: Iaee04f009bcde03712483e5e03de4a3441ea32b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-21src/soc/intel/apollolake: move TCO1 disable into bootblockVadim Bendebury
Cr50 reset processing could take long time, up to 30 s in the worst case. The TCO watchdog needs to be disabled before Cr50 driver starts, let's disable it in bootblock. BRANCH=none BUG=b:65867313, b:68729265 TEST=verified that resetting the device while keys are being generated by the TPM does not cause falling into recovery. Change-Id: Iaf1f97924590163e45bcac667b6c607503cc8b87 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21arch/x86: Write ACPI DBG2 table only if the device has been enabledMario Scheithauer
The commit 93bbd41e (soc/intel: Enable ACPI DBG2 table generation) causes a crash on the mainboard mc_apl1. On this mainboard all internal SOC UARTs in the devicetree are switched off. As a result, no resources are allocated to the UARTs. The function find_resource() expects an existing resource. Otherwise, the CPU will stop. It should therefore not only be queried whether a device is present, but also whether it is enabled. Change-Id: I56ce44ae0cf77916fcb640f79fb8944fe33177cd Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-21vendorcode/amd/pi/00670F00: Clean up makefileMartin Roth
- Remove unnecessary cflags, exports, and variables - Don't include AGESA cflags in the entire build - Reformat build target BUG=b:69220826 TEST=Build Change-Id: I60cb20a3849439cb808f5d3919588853e9c8c734 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21soc/amd/stoneyridge: Add ELOG to SMMJohn E. Kabat Jr
1. Add ELOG entries to smihandler.c 2. Add save_state utilities that are needed by southbridge_smi_gsmi BUG=b:65485690 Change-Id: I458babe1694f042215dd0e1c3277856e340de86f Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Reviewed-on: https://review.coreboot.org/21728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21amd/stoneyridge/spi: Fix reads greater than 5 bytesMarshall Dawson
This corrects a bug in 918c8717 "amd/stoneyridge: Add SPI controller driver". Pass a pointer to din to the do_command() function so the caller's copy is correctly updated. The bug allowed reads <= 5 bytes to work correctly (3 bytes consumed in the FIFO by the address) but overwrote data in the din buffer on larger transfers. Change-Id: I32b7752f047112849871cafc9ae33c5ea1466ee1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21soc/amd/common: Remove duplicated #include amd_pci_int_defs.hRichard Spiegel
Remove <#include amd_pci_int_defs.h> from amd_pci_util.h, as the user of the functions declared in amd_pci_util.h don't need the contents of amd_pci_int_defs.h. BUG=b:62200907 Change-Id: I258d549d3eea3fb8919c0cddbb41dc2bc4738c4e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21mb/google: Update/add ChromeOS device marketing namesMatt DeVillier
Commit c09c2a4 [mb/google: Add Chromebook marketing names] added marketing names for many ChromeOS devices; add some that were left out, correct some errors, and try to format model names/numbers consistently (or as consistently as the manufacturers allow). Change-Id: Ia13858e2e6ba7d7e025f25fad33e6338250498e5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 02:32:53 +0000