| Age | Commit message (Collapse) | Author |
|---|
|
Store initrd offset as 64bit integer.
Tested on Cavium CN81XX EVB: The initrd could be loaded when placed
above 4GiB. Previously it failed to find the initrd.
Change-Id: I5d1ae860ae4a4465546bc0ef89937d611d1e56ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Allow for shared dram configuration by introducing a new table
that collapses the common settings after removing the part
numbers. When employing this scheme the part number comes
from CBI.
BUG=b:112203105
TEST=Placed part number in cbi. Faked out memory sku id. And enabled
DRAM part num always in cbi. Everything checked out.
Change-Id: I5229695ce3eb686421b89ac55d8df4b9fcec705c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I689c5663ef59861f79b68220abd146144f7618de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27916
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Options that were deemed unneceesary on other code reviews have
been removed from the layout files. In addition, the checksummed
range has been extended to cover sata_mode and gfx_uma_size.
Change-Id: Id9e904f447809231806a786e39ed638f21e1bc5a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
I ported ga-h61m-s2pv based on the two Gigabyte b75m boards.
Based on another mainboard's code review comments, this patch
improves the code quality of these three similar boards.
ga-h61m-s2pv is tested and confirmed to be working, but I cannot
say the same regarding the other two mainboards as I do not have them.
Change-Id: Ib7747cceb5ba56f791677204cdc4c54c129c70c3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Set payload to NULL in case of decompression errors.
Fixes the attempt to boot a kernel that couldn't be decompressed.
Change-Id: I3a602b0e90923a0b5a3683c4a0adf9e4733d5a2a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Curley brace expansion is a bash-ism, so we can't use it for the
u-root command list.
This unfortunately also breaks the current Kconfig option since the
list needs to be separated by space instead of commas.
Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/27967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h
2. Add entry to identify CFL U GT and CPU to respective files
3. Add entry to identify CFL U to report_platform.c
BUG=none
BRANCH=none
TEST=Boot to CFL U RVP board with this patch and check if coreboot is
able to enumerate various devices and display correct component names properly
in serial logs.
Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed
Signed-off-by: Maulik <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/27522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Accesses to architectural registers should be really fast -- they're
just registers, after all. In fact, the arm64 architecture uses them for
some timing-senstive uses like the architectural timer. A read should be:
one instruction, no data dependencies, done.
However, our current coreboot framework wraps each of these accesses
into a separate function. Suddenly you have to spill registers on a
stack, make a function call, move your stack pointer, etc. When running
without MMU this adds a significant enough delay to cause timing
problems when bitbanging a UART on SDM845.
This patch replaces all those existing functions with static inline
definitions in the header so they will get reduced to a single
instruction as they should be. Also use some macros to condense the code
a little since they're all so regular, which should make it easier to
add more in the future. This patch also expands all the data types to
uint64_t since that's what the actual assembly instruction accesses,
even if the register itself only has 32 bits (the others will be ignored
by the processor and set to 0 on read). Arm regularly expands registers
as they add new bit fields to them with newer iterations of the
architecture anyway, so this just prepares us for the inevitable.
Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When we first created the arm64 port, we weren't quite sure whether
coreboot would always run in EL3 on all platforms. The AArch64 A.R.M.
technically considers this exception level optional, but in practice all
SoCs seem to support it. We have since accumulated a lot of code that
already hardcodes an implicit or explicit assumption of executing in EL3
somewhere, so coreboot wouldn't work on a system that tries to enter it
in EL1/2 right now anyway.
However, some of our low level support libraries (in particular those
for accessing architectural registers) still have provisions for
running at different exception levels built-in, and often use switch
statements over the current exception level to decide which register to
access. This includes an unnecessarily large amount of code for what
should be single-instruction operations and precludes further
optimization via inlining.
This patch removes any remaining code that dynamically depends on the
current exception level and makes the assumption that coreboot executes
at EL3 official. If this ever needs to change for a future platform, it
would probably be cleaner to set the expected exception level in a
Kconfig rather than always probing it at runtime.
Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of
others that are all accessed through the raw_(read|write)_${register}()
family of functions. There's no reason why this register in particular
should have an inconsistent accessor, so replace all instances of
set_cntfrq() with raw_write_cntfrq_el0() and get rid of it.
Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I'm pretty sure this SoC doesn't actually exist.
Change-Id: I53e268ee1795e524a2a4562d67a2b9f28af966d1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27965
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rotor is dead, long live [PROJECT NAME REDACTED]!
Change-Id: Ia9308944257255e077a44c1df262c7f49c69890c
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27964
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 3 new Kconfig options:
DRAM_PART_NUM_IN_CBI
DRAM_PART_NUM_ALWAYS_IN_CBI
DRAM_PART_IN_CBI_BOARD_ID_MIN
These control whether to 1. attempt to use CBI at all 2. always use cbi
and 3. conditionally use cbi based on board id. The intent is that the
MIN variant would be used for the tranisition period then cut over to
ALWAYS after full transition. Since multiple OEMs have different
schedules these options are there to bridge the gap. yorp. bip, and
octopus build targets would never flip DRAM_PART_NUM_IN_CBI, but in case
someone does the MIN values are 255 to always take the old path.
BUG=b:112203105
TEST=Set correct part number on phaser during testing.
Change-Id: If9a0102806d78e89330b42aa6947d503a8a2deac
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Within procedure arch_write_tables, the pointer "rom_table_end" is updated
every time a table is created. However, after creating last table, pointer
rom_table_end is not used, though it is updated. Add a "(void)rom_table_end;"
at the end to avoid the static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I8a34026795c7f0d1bb86c5f5c0469d40aa53994a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Within procedure save_bsp_msrs, the structure pointer "msr_entry" is updated
every time procedure save_msr() is called. However, after the last call of
save_msr(), "msr_entry" is not used, thus causing a static analysis error.
Add a "(void)msr_entry;" at the end to avoid the static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: If0fb336fbf49eec3da255fadbe38b3a38768d0cf
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I13dec72b2de2a525d45909e697c33fbdc31111cb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I65e57b37db9649b30ca25b2150f21ebffee73105
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iff445dccf29957078b8308d73fb302d03cf47d31
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie5bf036a63a254dd95b45a0823086c8079eeafe2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ief6a04ccb63658b5fb03cd1d298bf00948cf7410
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I24d219b4ce6033f64886e22973ca8716113d319f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I00094028036f33892362b935899e1bceef1da625
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie98ee00a83d837b6d6491fed3a474048dc23e104
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8053d0f0863aa4d93692487f1ca802195c2d475f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iadc28d1632aa9b7d0b028c229049a348d5c07882
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure.
It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for
this issue.
CLK[6:4]
CMD,DATA[3:1]
original register value: 0x6B
enhanced: 0x7F
BUG=b:111964336
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/27816
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and
could lead to the return of an invalid (non-initialized) value. Validate
the parameter early on.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In procedure pci_rom_probe(), variable vendev is initialized twice.
Remove one initialization.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I8a71aa1aea2047ab2d98e09d1d6610de552b6cb4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27949
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In procedure exception_init(), structure pointer gates is initialized twice.
Remove one initialization.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: If0280963e8b796f795e77a11569277dcf16b4507
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27948
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In procedure allocate_cpu_devices(), if structure pointer new is null skip
using the pointer. Add a "continue;" to skip using the pointer.
The issue was found by static analysis tool.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I7011fbfa0725f22a6dfbca6752e668eddac3463c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27951
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Micron material that was broken has long since been fixed that
required this option. glkrvp had these stale entries and were
subsequently copied to octopus. Remove the need for this option.
BUG=b:35581751
Change-Id: Id73584367c2ad0e4958b5ea0f04a28e5fc82d085
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27959
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If TSEG_BASE is not TSEG_SIZE aligned the SMRR settings are invalid, therefore
guard against this.
Change-Id: I48f55cdac5f4b16b9a8d7a8ef3a84918e756e315
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
RK3288 has always been notoriously low on SRAM, to the point where its
boards have less than 100 bytes left in both their bootblock/verstage
sections. This becomes a problem every time we try to add a tiny amount
of code to common coreboot interfaces that are included in them.
This patch manages to add another KB to each, one from the CBMEM console
(which now might get cut off a bit, but that's life) and one by moving
the TTB_SUBTABLES to PMUSRAM. PMUSRAM is a weird world where write
accesses must always be exactly 4 bytes long or they hang the CPU, so we
mostly ignore it... but thankfully, page table entries are exactly 4
bytes long and that's the only thing we write to this region, so it
works out in this case.
Change-Id: I5aecd66db40b3f52299b270322b8c8784dbe7e6f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Use bitfields to pack the struct more tightly.
Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27815
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The implementation of wpcd376i in coreboot is based on the
superiotool output which apparently was incorrect. This
patch refines the implementation to match the datasheet.
Change-Id: I0108e912dc4f603276074f0999c6d3146c3b13f9
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Within procedure cea_hdmi_block, the variable "b" is used as an index into
a buffer of EDID bytes. At the end, it's incremented but not used, thus
causing a static analysis error. Add a "(void)b;" at the end to avoid the
static analysis error.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: Ibd0b4a21bf82fcc46a627bc75564a850b7374989
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27929
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skylake SoC code now sets the icc_max based on the CPU SKU, so we
should not hard-code it in the device tree.
BUG=b:110890675
BRANCH=None
TEST=boots on atlas
Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/27791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
|
|
In procedure tpm_unmarshal_response(), variable "rc" is used early to
decide if it should return NULL. Later however, the code proceeds to its
end even if one subroutine reports error. If "rc" is not 0, report that
there was a partial error in the procedure.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I7575bc75104fd97f138224aa57561e68f6548e58
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27931
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Describe the new uImage.FIT loader.
Change-Id: I8b2060f2a63406669196bcbc190cc1511ae9fe94
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
BUG=none
TEST=compiled on grunt and made sure USB still works in depthcharge
Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If a target is interrupted in the middle of writing an output file, the
file could be left in a corrupt state. A subsequent make invocation will
see the file as up to date and can cause very confusing errors.
BUG=b:112267918
TEST=Made a target fail before completion and verified make deleted the
output file.
Change-Id: I865827ea769b4dffa638d4324fc7284f6cb2ddc0
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the ability to specify the fwid version via a file instead of
via config. This makes it so when doing an incremental build all
objects are not invalidated when bumping the fwid.
The coreboot ebuild will create this file to pass the latest version.
BUG=b:112267918
TEST=ran dmidecide -t 0 and verified version was present
Change-Id: I955106efd648a75a1311f24ede46bd238d1517e0
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This configures the ACPI FADT perferred power management profile to
PM_MOBILE instead of PM_DESKTOP.
I'm not sure what impact this actually has. I just noticed the other
boards have it set.
BUG=b:110971913
TEST=Made sure SYSTEM_TYPE_LAPTOP shows up in coreboot.config
Change-Id: Iea1b8359b80d167e69745358f543f025713294ba
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
By setting this register in bootblock AmdInitEnv will no longer trigger
a reset in romstage. This fixes a few vboot test failures and also
speeds up boot time.
BUG=b:111610455
TEST=Built grunt and made sure bootblock only happens once on cold boot,
and S3 resume.
Change-Id: Ie19f7a14deaef45ac63156bec6946273c1b9447e
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a function to provide a rudimentary dump of the Machine Check
Architecture registers. These values survive a warm reset.
BUG=b:65445599
TEST=Verify on a Grunt having propensity for #MC errors
Change-Id: Ib6875cabe3041e65c811d8b2232f7ac6bedd1a02
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Define the additional registers used for each Machine Check
Architecture bank.
Change-Id: I962f23662789a3b974f4946555f67fcfc6147df8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Extend the existing reset handling features in Stoney Ridge to plan for,
and recognize, warm resets. The ColdRstDet bit is always zero on a cold
reset, and is intended as a mechanism for the BIOS to determine the type
of a reset that occurred.
Set ColdRstDet=1 after all cores have been initialized, so that any
subsequent reset may be identified as warm/cold. A later patch will check
the value during mp_init.
Change-Id: I90255918de03018c9f090bff1e56a8bda5e7365e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the value discovered in the MCG_CAP[Count] for the number of MCA
status registers to clear. The generations should have the following
number of banks:
* Family 10h: 6 banks
* Family 12h: 6
* Family 14h: 6
* Family 15h: 7
* Family 16h: 6
Change-Id: I0fc6d127a200b10fd484e051d84353cc61b27a41
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove for() braces from around single lines. Remove extra blank lines.
This cleans up checkpatch problems in a subsequent patch.
Change-Id: I329ac03365e51799581c56eed27ee54de6826f14
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change the defined name of MCI_STATUS (i.e. MCi_STATUS) to reflect its
MC0_STATUS address.
Change-Id: I97d2631a186965bb8b18f544ed9648b3a71f5fb0
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/27922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The DRAM part number can be stored in the CBI data. Therefore, add
support for fetching the DRAM part number from CBI.
BUG=b:112203105
TEST=Fetched data from CBI on phaser during testing.
Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The current call for saving dimm info passed the lpddr4_cfg and
memory sku id. In order to prepare decoupling the part number
from lpddr4_cfg provide a new API, save_lpddr4_dimm_info_part_num(),
which explicitly takes the part number. The previous API now
uses the new one internally.
BUG=b:112203105
Change-Id: Ieadf452b6daa3231a0c5e3be61b0603b40d0fff2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
nWR (Write-Recovery for AutoPre-charge commands), the programmed value of nWR
is the number of clock cycles the LPDDR4-SDRAM device uses to determine the
starting point of an internal Pre-charge operation after a Write burst with
AP (auto-pre-charge) enabled. For >2133MHz speed parts the nWR needs to
be set to 24 clock cycles. The nWR field, though, is only in the GLK
FSP, so just update that field conditionally based on the GLK Kconfig
option.
BUG=b:112062440
TEST= build test
Change-Id: I1147538f72f4e2f14e32f3657c05f1f505a56fbf
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In procedure generate_cpu_entries(), the code was copied from code that
could change variables "plen" and "pcontrol_blk" based on number of cores.
This is not the case with stoneyridge (2 cores only), and there's no need
to use the variables. Remove them and replace with fixed values.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I0258b19960b050e8da9d218ded3f1f3bfccad163
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27877
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In procedure pci_get_resource, when setting an IO mapped base address,
variable attr is &= with PCI_BASE_ADDRESS_IO_ATTR_MASK. However, in this
particular code flow variable attr is not used later. Remove the line.
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: Ia4fdda1be92d22017a7a913a911db15aaa440b69
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The variable "begin" is extracted from the structure, but 4 lines below
it's overwritten with "end - size". This causes a static build scan error
that should be fixed. Remove the initial assignment of variable "begin".
BUG=b:112253891
TEST=Build and boot grunt.
Change-Id: I0a265747e61289f045c5cac09e40478bd31e16fc
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27886
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The devicetree is not run through a C pre-processor, so remove it.
Change-Id: I161be45b2035f3a8724bf3217260e7571c429da8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27927
Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implementation updates the chip select control register
programming in gspi controller setup call to program the correct
bit fields for chip select state.
Change-Id: Ifab37b0003f09a680024d5b155ab0bb157920a53
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/27889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
cache_sync_instructions() has been superseded by
arch_program_segment_loaded() and friends for a while. There are no uses
in common code anymore, so let's remove it from <arch/cache.h> for all
architectures.
arm64 still has an implementation and one reference, but they are not
really needed since arch_program_segment_loaded() does the same thing
already. Remove them.
Leave it in arm(32) since there are several references (including in SoC
code) that I don't feel like tracking down and testing right now.
Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
coreboot payloads expect to be entered with MMU disabled on arm64. The
usual path via Arm TF already does this, so let's align the legacy path
(without Secure Monitor) to do the same.
Change-Id: I18717e00c905123d53b27a81185b534ba819c7b3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch replaces the UART in the bootblock of SDM845 with a bitbang
implementation. Since SDM845 hardware UART needs a firmware blob loaded
into it before it becomes usable, it is not really suited for use in the
bootblock (since by the time we can read blobs from SPI, the bootblock
is essentially over anyway). This solution allows us to still have some
console output during early SoC initialization.
Change-Id: I0c252ec83a7993edce5c4debc687f1fdd0d7b36d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change bce49c2 (security/tpm: Improve TCPA log generation) missed
checking for NULL pointer before accessing the tcpa_table returned by
tcpa_log_init. This change fixes the boot hang observed on octopus by
ensuring pointer is checked for NULL before using it.
BUG=b:111403731
TEST=Verified that octopus boots up fine.
Change-Id: I2e46197065f8db1dc028a85551546263e60d46b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I109f620bb644c3979ae297bdf544d295cdbac57f
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The Upper Map section in the descriptor contains a database of flash
chips (VSCC Table). Its offset is located at a fixed offset from
the beginning of the image. ifdtool falsely calculates the offset
from the descriptor signature which has moved by 16 bytes with
step b of the Ibex Peak (5 series) chipset. This produces bogus
output for all chipsets older than that.
This patch corrects the behavior by calculating the offset of
flumap by adding 4096 - 256 - 4 to the start of the image.
Change-Id: I14f029fe702c129dfd8069a58fbd41113700f7ef
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Apparently they were introduced when refining ICH7 support when
porting Kontron 986LCD-M and then copied over to ICH9 and 10.
Change-Id: I2d9ece608955310d22b79574b9113a1521b2076c
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/27855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on,
it may cause damage on the GPIO pad.
To prevent, we would set this pad to GPO on romstage before EDP power on.
Since we need to cover all systems in market, I put it into romstage
instead of early_gpio_table.
BUG=b:111860510
BRANCH=poppy
TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on
Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/27773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds variant callback to get GPIO configuration table in
romstage and configures these GPIOs before memory training is
performed.
BUG=b:111860510
BRANCH=poppy
Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change provides implementation of smbios_mainboard_sku() to add
proper "skuX" string to SMBIOS table 1.
BUG=b:112163362
TEST=Verified "dmidecode -t 1" reports skuX correctly.
Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
AMD ALIB Function 1 accepts the AC/DC startup state. This
is reported to be required for AMD PSPP settings.
BUG=b:112020107
TEST= build test
Change-Id: Ibb6c872d84745217912956c15d6ca2e8ba387561
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27785
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add default PSPP AGESA setting for Kahlee/Grunt mainboards.
BUG=b:112020107
TEST= build test
Change-Id: I8a8605402379de88a04f3a16553c308513fa1531
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/27784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Now that an updated bootloader with important fixes is available at coreboot
repository, all stoneyridge boards should use it. Move the selection of
SOC_AMD_PSP_SELECTABLE_SMU_FW from mb/google/kahlee to soc/amd/stoneyridge.
BUG=b:111428800
TEST=Build and boot grunt.
Change-Id: Idf8e348efbc85569aa1163125f412c5242c46eb4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27844
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id2d2ed0fa97f2cef5818a8508bb8ee3ddba73647
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/26060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This patch revises IGD naming and adds AML IGD in platform reporting.
BUG=None
BRANCH=None
TEST=emerge-atlas coreboot chromeos-bootimage & Ensure AML IGD is shown
in platform reporting.
Change-Id: Id8f8379703abdaa5b14a4337a4fca04b370f3a2a
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds AML IccMax for VR configuration. From doc #594883, the
IccMax for Core was changed to 28A, we need this patch to accommodate
the changes. Besides, removes unused sku information from
sku_icc_max_mapping structure.
BUG=b:110890675
BRANCH=None
TEST=Remove icc_max from DT &
emerge-atlas coreboot chromeos-bootimage &
Tested with AML-Y and KBL-Y SKUs.
Change-Id: Ic22bae162b58b06b9519f1b708be55bde5e4641e
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/27610
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update power limit1 value from 8W to 10W. There is an error
in the energy calculation for current VR solution on GLK.
Experiments show that when power limit1 set to 10W, gained
performance improvement with SoC TDP reaches max (6W) power.
BUG=b:79779737
BRANCH=None
TEST=Build coreboot for Octopus board.
Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/27819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
setup_spread_spectrum is called in early_init, meaning the console is
not initialized yet. So you won't see boot block booting twice.
BUG=b:111610455
TEST=booted grunt and verified that AmdInitReset does not reboot. I had
AGESA patched to skip the JTAG check.
Change-Id: Ia036ea513ac67d4b8bcf5a78029d969a4ae012a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
From doc 571118, the bit 5 of OdtConfig is nWR config.
If the bit 5 is set, MRC will set MR1 nWR field to 24.
If the bit 5 is clear, MRC will set MR1 nWR field to 6.
Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/27814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The segment error descriptor is actually 13 bits long.
BUG=b:109749762
TEST=Verified by causing a segment error
Change-Id: I3439f9ce1e8cf0c472c4eb82d74a787718c9609f
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change adds ACPI properties for WDT8752A device.
BUG=b:111402335, b:111102092
BRANCH=master
TEST=Verify touchscreen on fleex works with this change
Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d
Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the default value for Iccmax which is specified in vr_config.c.
The AcLoadline and DcLoadline keep the poppy value. Besides, the
USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT
and the others on the daughterboard are set to USB2_PORT_LONG.
Those setting need to be fine tuned later.
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: Icabfac04c94b3d480872c243d811509e274ef122
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The gpio setting is based on the proto board schematics
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add memory configuration based on the proto board schematics
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move the build board directory from poppy to rammus.
BUG=b:111579386
BRANCH=Master
TEST=Build pass
Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=none
TEST=none
Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Kahlee based boards don't use SATA, so disable SATA on all boards to save
power.
BUG=b:112139043
TEST=Build and boot grunt, checked the absence of SATA PCI.
Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Grunt boards don't use SATA, so it should be disabled to save power.
Check if SATA is enabled in devicetree, and enable/disable the device
based on that setting.
BUG=b:112139043
TEST=Buil and boot grunt, checked the absence of SATA PCI.
Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/27845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since only a handful of boards have descriptor blobs in the tree, it makes no
sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard.
This patch flips the default value of said variable, rendering all current
overrides unnecessary. The few boards which have an IFD in the blobs repo use
`select HAVE_IFD_BIN` to enable adding the IFD by default.
Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed
alongside the latter, and has been added to the boards with a ME blob as
`select HAVE_ME_BIN`.
Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well.
Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/27218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch contains the parts that changed the hash of the generated binary;
probably due to the compiler optimizing things slightly different.
Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This part of the cleanup patches changes the hash of the output binary; likely
due to the compiler optimizing things differently.
Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27708
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the
hash of the output binary.
Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27707
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code only compiled when REAL was set to 1; the other case included an
unpublished include.
Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27706
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to vendor's requirements LED 2 and LED 3 should be turned
off in late boot process. Add appropriate functions to read and
write GPIO status.
Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change GPIO setting to use IOMUX to refer to GPIO by
IOMUX register as in BKDG for Family 16h Models 30h-3fh
Processor Rev 3.06.
Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/27665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Add Mailbox 3 driver
* Request brightness change through Mailbox 3
* Return Ones on error or if unsupported
* Mark existing code as legacy
(still required if no GMA driver is running)
* Call legacy code if Mailbox 3 is unsupported, on error or
if gma driver isn't running
Tested on Lenovo T430:
* Brightness control still works
* Brightness is the same on S3 resume
Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
