| Age | Commit message (Collapse) | Author |
|---|
|
Add Kconfig to configure coreboot for a specific Galileo board.
Configure the GPIOs for the specific Galileo board.
TEST=Build and run on Galileo Gen2
Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14826
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
strlen(string) was on the "negative" side of the selection operator, the
side where string is NULL.
Change-Id: Ic421a5406ef788c504e30089daeba61a195457ae
Reported-by: Coverity Scan (CID 1355263)
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14867
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
The libpayload CBFS APIs are pretty old and clunky, primarily because of
the way the cbfs_media struct may or may not be passed in and may be
initialized inside the API calls in a way that cannot be passed back out
again. Due to this, the only real CBFS access function we have always
reads a whole file with all metadata, and everything else has to build
on top of that. This makes certain tasks like reading just a file
attribute very inefficient on non-memory-mapped platforms (because you
always have to map the whole file).
This patch isn't going to fix the world, but will allow a bit more
flexibility by bolting a new API on top which uses a struct cbfs_handle
to represent a found but not yet read file. A cbfs_handle contains a
copy of the cbfs_media needed to read the file, so it can be kept and
passed around to read individual parts of it after the initial lookup.
The existing (non-media) legacy API is retained for backwards
compatibility, as is cbfs_file_get_contents() (which is most likely what
more recent payloads would have used, and also a good convenience
wrapper for the most simple use case), but they are now implemented on
top of the new API.
TEST=Booted Oak, made sure that firmware screens and software sync
worked okay.
Change-Id: I269f3979e77ae691ee9d4e1ab564eff6d45b7cbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14810
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Add register access routines for the GPIO and legacy GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I0c023428f4784de9e025279480554b8ed134afca
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14825
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add LPC_DEV and LPC_FUNC symbols
TEST=Build and run on Galileo Gen2
Change-Id: I8485e2671af439f766228d4eaf9677c2ff8ff3f6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace # define with #define
Align the right hand column to prepare for further expansion
TEST=Build and run on Galileo Gen2
Change-Id: Ie4d9fb56d52d7291be5523d31c1d3aa51f94dcd6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Simplify the union references to enable Coverity to properly process
the routine.
Found-by: Coverify CID 1349854
TEST=Build and run on Galileo Gen2
Change-Id: I667b9bc5fcde7f68cb9b4c8fa85601998e5c81ff
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14870
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Coverity does not like the use of for/break, switch to using returns
instead.
Found-by: Coverity CID 1349855
TEST=Build and run on Galileo Gen2
Change-Id: I4e5767b09faefa275dd32d3b76dda063f7c22f6f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Ioh.h from EDK-II to enable easy comparisons between EDK-II and
coreboot implementations.
TEST=Build and run on Galileo Gen2
Change-Id: I9320101a4a2c16ed18f682f3d04623c54afb52fd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14824
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
|
|
Don't allow an array index of 2 to be processed by the code referencing
the array.
Found-by: Coverity CID 1353337
TEST=None
Change-Id: I586ca14416a6e40971f8f6f4066fbdb4908ca688
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14868
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is an initial stab of configuring the reef pads.
Change-Id: I8d8060745af6fbada268c6c6f3492b985ddf9eb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14831
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
|
|
Using a dedicated variable is slightly less readable and makes the code
less consistent, given that other test functions are called directly in
the if statements.
Change-Id: If52b2a4268acb1e2187574d15cc73a0c1d5fe9bb
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14817
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add helper functions for generating some common objects:
acpigen_write_STA(status) will generate a status method that will
indicate the device status as provided:
Method (_STA) { Return (status) }
Full status byte configuration is possible and macros are provided for
the common status bytes used for generated code:
ACPI_STATUS_DEVICE_ALL_OFF = 0x0
ACPI_STATUS_DEVICE_ALL_ON = 0xF
acpigen_write_PRW() will generate a Power Resoruce for Wake that describes
the GPE that will wake a particular device:
Name (_PRW, Package (2) { wake, level }
Change-Id: I10277f0f3820d272d3975abf34b9a8de577782e5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to produce smaller AML and not rely on the caller to size the
output type appropriately add a helper function that will output an
appropriately sized integer.
To complete this also add helper functions for outputting the single
OpCode for Zero and One and Ones.
And finally add "name" variants of the helpers that will output a
complete sequence like "Name (_UID, Zero)".
Change-Id: I7ee4bc0a6347d15b8d49df357845a8bc2e517407
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add helper function to emit a string into the SSDT AML bytestream with a
NULL terminator. Also add a helper function to emit the string OpCode
followed by the string itself.
acpigen_emit_string(string) /* Raw string output */
acpigen_write_string(string) /* OpCode followed by raw string */
Change-Id: I4a3a8728066e0c41d7ad6429fad983e6ae6962fe
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14793
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add helpers for writing word and dword values in acpigen and use them
throughout the file to clean things up:
acpigen_emit_word - write raw word
acpigen_emit_dword - write raw dword
acpigen_write_word - write word opcode and value
Change-Id: Ia758d4dd25d0ae5b31be7d51b33866dddd96a473
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently you cannot assign a string to a register in devicetree because
the quotes are removed when parsing and the literal is assigned directly.
Add a parse option for two double-quotation marks to indicate a string
and return a quoted literal that can be assigned to a register with a
'const char *' type.
Example:
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "uid" = "1"
device i2c 15 on end
end
Change-Id: I621cde1f7547494a8035fbbab771f29522da1687
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Long options can be useful when writing examples and documentation
as they are more expressive and obvious to the reader.
Change-Id: I39496765ba1f15ccc2ffe1ad730f0f95702f82b8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14736
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
This adds the initial scaffolding for the reef reference board.
One big thing missing is the GPIO configuration.
Change-Id: I8e2d275df296bb397bb33dbd0c66fc87c82ff10f
Signed-off-by: Aaron Durbni <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14798
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of having the mainboards duplicate logic surrounding
LPDDR4 initialization provide helpers to do the heavy lifting.
It also handles the quirks of the FSP configuration which allows
the mainboard porting to focus on the schematic/design.
Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14790
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I6b345670db7df652b8b712b721dfe2905373e0d5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14630
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Change-Id: I1bd33e423b0fcb69597e001b61c6ea916f5fe44a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14622
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
PCI device ID of this mini-PCI-e WLAN card is 8086:088e.
With this card inserted on pcengines/apu1 mini-PCI-e slot J17,
system halts late in ramstage, in agesawrapper AMD_INIT_MID.
Offending operation is enabling PCIe ASPM L0s and L1 for the card.
That is, writing PCIe capability block Link Control [1:0] = 11b
in the card's configuration space. AGESA already has a blacklist
for the purpose of masking such unstable ASPM implementations.
Change-Id: I9623699c4ee68e5cdc244b87faf92303b01c4823
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/8496
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If the option is not provided, ssh uses the default port for the host,
which is usually 22, but may be overridden in the user's SSH
configuration.
Change-Id: I303e9aeae16bd73a96c5e6d54f8e39482613db28
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14522
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In some configurations, "git push <remote>" (without a branch name)
refuses to do anything.
Change-Id: I23a401b39dd851e9723676586c7f29afa111b49d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14539
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
In order for apollolake mainboards to utilize the common GPIO API
it actually needs to be implemented.
Change-Id: I41de8d5d9f3c39e7e796eae73b01cb29e9c01347
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14797
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to allow using the same C source to be compiled
for multiple stages (with #if/#endif guards) one needs the
necessary function delcarations. Therefore, remove the
guards.
Change-Id: Iea94d456451c5d3db8b8b339e81163b3b3fed3ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14796
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
- manpage
- usage message
- new warning message if -S is used on an unsupported chipset
Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14624
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of having the mainboards duplicate the same boilerplate
code utilize the common FADT infrastructure to reduce duplication.
Change-Id: If824619fd619433974e588050a933d2c19b97ec8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14779
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Not used as we link AGESA into same romstage and ramstage ELF.
Change-Id: Ia427b9c0cc88b870de75df14bba4ca337a28adff
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: If48fffee1441b6bb012a8d99abb794f7a35efcf6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14412
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9faeda508694f950f1b025765e2ac63bc91747fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14411
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ACPI BAR (BAR2 - offset 0x20) is not PCI compliant. That means
that probing may not work. In that case, a resource still needs to be
created for the BAR.
BONUS: We now avoid the need to declare the MMIO resources as fixed.
Change-Id: I52fd2d2718ac8013067aaa450c5eb31e00738ab9
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14634
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to
be done in platform code.
Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14764
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The old code only checked for an RW_MRC_CACHE region when
CONFIG_CHROMEOS was selected. This assumption is not necessarily true,
as one can have FMAP without a CHROMEOS build. As a result, always
search FMAP first before falling back on CBFS for locating the MRC
cache region.
The old logic where CHROMEOS builds would fail when RW_MRC_CACHE was
not found is preserved, such that behavior does not change.
Change-Id: I3596ef3235eff661af055968ea641f3e9671cdcd
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14757
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I384cef0f5b4b71dbd7ad6d1d508e7c6395bf3f2d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14759
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When SOC_UART_DEBUG was not set, the boot would hang somwhere in
ramstage, as evidenced by POST codes reported from the EC. This was
traced to the .set_resources and .enable_resources members of the UART
PCI driver being set to NOOP.
Although the exact mechanism of failure is not known, this change
eliminates the hang.
Change-Id: Ic2f3d56a964ec890ebfa1e1a7770f1ae2eb22281
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14771
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for Elan touchscreen on I2C3 for amenia
BUG=None
TEST=Boot to Chromium OS and verify if touchscreen is working.
Change-Id: Ic75bef0e5878bd5b8c0d727400679663d9f591e3
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/14768
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to provide other stages access to the ioport range
required by the ChromeEC provide google_chromeec_ioport_range()
function to fill in the details. Currently, the ioport range is
only consumed by the LPC implemenation. Also allow ec_lpc.c to be built
for the bootblock stage.
Change-Id: I6c181b42e80e71fe07e8fa90df783107287f16ad
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14769
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however
the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define.
Those 2 values are not consistent. Therefore, remove the Kconfig
variable and defer to the #define generated by fmdtool.
Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14765
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Change-Id: I58b2c3c52444d9a755d05529992507086a423f1a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14620
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Remove the phrase "which accompanies this distribution" from the license.
Re-format the license to fit in 80 columns.
TEST=Build and run on Galileo Gen2
Change-Id: I8d893cf1270b95b27eab7142b276ebfce24ec2ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14774
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build pass
Change-Id: Id3dd3a553370eada1e79708dc71afc2d94d6ce93
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0949b0d9ec12eff7edb3d7de738833f29507c332
Original-Change-Id: I8052f86d4d846e5d544911c5b9e323285083fb5c
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340024
Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The origin of UART config is less interesting than having the config be
correct.
Change-Id: I834e3a54105a8fd7d62f388e4a9ad0992ecec807
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14767
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
The code needs to know what kind of part the SoC is, but the question
was weirdly phrased and also exposed to the user (instead of being a
silent "select" to do in a board).
Change-Id: I0344c528d86ac047fc49ccff9e149865bbd4b481
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14766
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=none
BRANCH=none
TEST=compiled
Change-Id: I125585e33783a39194bb12b2dd746bb968da5fee
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6f986e57bc1ce341e1b0ae6a419d4bbe0f169aa
Original-Change-Id: Ife4cde2318e007a76c978973c13bbce583d082a8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/343556
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14760
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9047251608fbb92180f2e92d19fd128c5f1ef399
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14754
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9422d6ca2601dcc6e3d7c4a2c413c32015c10e00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14753
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rename Ipq806xLcc* to IpqLcc*.
Change-Id: Ib235c1cdb36bb007a673133f59026863990e1a6f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Increase the HEAP size to handle large vpd data.
BUG=chrome-os-partner:50499
TEST=board with vpd data no longer showing out of memory error
BRANCH=none
Change-Id: Ia0793a626c3500c3469c608bae987ae15a176016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12090652d2b70ec553a4f59fe9917a1b3b204579
Original-Change-Id: I1ead4c104b27cf678c68132b0ab08e32c15790b2
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340267
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Clear the crash dump cookie set by SBL to indicate that
it is a normal reset.
Inform DDR image of the entrypoint for SDI image to be
preserved in OCIMEM which will be needed during watchdog
resets.
BUG=chrome-os-partner:49249
TEST=DDR image is able to fetch the entry point address
BRANCH=none
Change-Id: I3e6e4a108585bb257e3ad02956c420acbcb2554e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd726256a5ae89672810b57e1d2a7a9287f60627
Original-Change-Id: Id6e09516209f47c3ea8fa3d8d90440789b395660
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333321
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14679
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Able to talk to the TPM device and the commands
seem to succeed.
BUG=chrome-os-partner:49249 chrome-os-partner:49250
TEST=All commands to the TPM succeed
BRANCH=none
Original-Commit-Id: c13900108f524c8422c38dee88469c8bfe24d0bd
Original-Change-Id: Ie8c3c1ab1290cd8d7e6ddd1ae22f765c7be81019
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333314
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Add support for BLSP QUP SPI
- Enable BLSP SPI driver for ipq40xx
- supports only FIFO mode
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: 0714025975854dd048d35fe602824ead4c7d94e9
Original-Change-Id: If809b0fdf7d6c9405db6fd3747a3774c00ea9870
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333303
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ia518af5bfc782b08a0883ac93224d476d07e2426
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14677
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:49249
TEST=Compiles and Boots and detect USB storage
BRANCH=none
Change-Id: I9f33adccaabf436c8a8ba08033ff1221ace71aaa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f6b18062b7570b6aa71a72ad6185edaf00b48e2d
Original-Change-Id: I86a297fc915d4886958f8490dda2c1fa00a6c9d3
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333312
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14675
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:49249
TEST=Compiles and boots
BRANCH=none
Original-Commit-Id: 96a125f99af3eaa8931563fa74ccef8dd997f3ca
Original-Change-Id: Iebfe7429c400e7119510a51c3124d432f00af76d
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333319
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Add function to reset TPM
BUG=chrome-os-partner:49249
TEST=Able to read TPM registers
BRANCH=none
Original-Commit-Id: 9df3e9dfe61382143394a58a3a927c05a875b377
Original-Change-Id: I38732acc4418c94b88a430ba697db4e3b145c341
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333317
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ifc8df3b7e231eef944efec3a6f973b402c11bcaf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14674
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Without monotonic timer support, timer related APIs like
timer_monotonic_get etc. are optimized out by the compiler. This
results in timed loops to become indefinite loops
stopwatch_init_msecs_expire(...);
do {
something();
} while (!stopwatch_expired(...));
In our specific case, loops sampling the recovery/wipeout button
in src/mainboard/google/gale/chromeos.c:get_switch_state() turned
into infinite loops and the boot didn't proceed.
BUG=chrome-os-partner:49249
TEST=Confirmed that the loop breaks per the specified timeout
using the minicom's console log time stamps
[2016-04-11 12:34:37] recovery button pressed
[2016-04-11 12:34:45] wipeout requested, checking recovery
[2016-04-11 12:34:53] recovery requested
BRANCH=none
Change-Id: I7ed2616c50ebb28b43ad769d3105f7d4e31b1114
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e00f888570b577849cb526220ffe6f22fe9d2ece
Original-Change-Id: Ic0b800558ebce482da6321c30dbf732080b82941
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/339873
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Reviewed-on: https://review.coreboot.org/14673
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=Able to read content from SPI NOR, with boards having WinBond SPI Flash
BRANCH=none
Change-Id: I104a750aa6545264003cd785c347cb9354e59b5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b933c7eeb133201877596c39cf4b3c263aca5498
Original-Change-Id: Ida767dab3abe72def2388e5eeb41eeb575205528
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/339872
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14672
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
DDR binary runs from here
BUG=chrome-os-partner:49249
TEST=Boots and DDR seems to be usable
BRANCH=none
Change-Id: I6111dddcabf05e5cb84ee9ebcc1803addb1e91cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7baf2079845964a150f51d558b396a1a9b0dc0a3
Original-Change-Id: I1d7230b229db3abfb73e6d8f9ca085650e6abec8
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333313
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14671
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This file had the memory regions applicable to ipq806x.
Update the regions as applicable to ipq40xx.
BUG=chrome-os-partner:49249
TEST=Able to boot on DK04 board
BRANCH=none
Change-Id: I0d782eb70fd62c6bf92f9fac39d2e42e9af82012
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6a088c2666cf5be52358bb4271b45cb65d11f7c
Original-Change-Id: I4fb3ca7fb168813d8871bfb87d475fd09d1a9d97
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333310
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14670
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: I7c58fe7dc0132e8c01163fc049217f07081c658a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d746b667e309fd8eec62cf84e4ea4006ab2984f0
Original-Change-Id: Idcb3189a812e75815eb15a61c1de273b5e218875
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333305
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14669
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set SAGV to 2 (Fixed High) so that MMA test would
stress memory at high freq point. MMA tests does not
support stressing memory at both high and low points.
BRANCH=glados
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu and ran MMA tests.
Change-Id: I0b2f6cf9955076f6146b957c4d40fe24e6c3f0e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b16b756d9a74c9111c78fce848b059daee65669
Original-Change-Id: I4c4a59407844e1986fa2cf3a0035aff1d8529cf9
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/339002
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit c43d9880fe4efd1e1bb853d35140424fb7dd7e99)
Original-Reviewed-on: https://chromium-review.googlesource.com/338847
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14697
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
(1) Added following new function.
cbfs_locate_file_in_region - to locate (and mmap) a file in a flash
region
This function is used to look for MMA blobs in "COREBOOT" cbfs region
(2) mma_setup_test.sh would write to "COREBOOT" region.
(3) changes in mma_automated_test.sh. Few MMA tests need system to
be COLD rebooted before test can start. mma_automated_test.sh would
do COLD reboot after each test, and so i would sync the filesystem
before doing COLD reboot.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS
Not tested on Glados.
Change-Id: I8338a46d8591d16183e51917782f052fa78c4167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4
Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331682
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
mma_automated_test.sh takes a config file (/usr/local/mma/tests) as
input and executes all tests mentioned in the config file.
format of the config file is one or more lines mentioned below.
<MMA test name> <MMA test param> <#count>
e.g. consider following config file.
Margin1D.efi Margin1DRxVrefConfig.bin 4
RMT.efi RMTConfig.bin 1
MarginMapper.efi ScoreTxVref-TxDqDelayConfigCh1.bin 2
Margin2D.efi Margin2D_Cmd_Ch0_D1_R0_Config.bin 3
This will execute Margin1D.efi MMA test 4 times with
Margin1DRxVrefConfig.bin param and results will be stored
in DUT under /usr/local/mma/results_<date-time-stamp>
with Margin1D_Margin1DRxVrefConfig_1.bin to
Margin1D_Margin1DRxVrefConfig_4.bin name. Subsequently all tests
will be executed and results will be stored.
/etc/init/mma.conf invokes mma_automated_test.sh when DUT
starts. And if valid test config is preset at /usr/local/mma/tests,
mma_automated_test.sh will continue executing the tests. Each time
DUT will be rebooted and next test in sequence will be executed.
Overall follow these steps to start MMA.
(1) create /usr/local/mma/tests file with the syntax mentioned above.
(2) either reboot the DUT (mma.conf will be called at each boot time,
which would run the mma_automated_test.sh) or execute "start mma"
command (to save a reboot cycle.)
(3) all test results can be found under
/usr/local/mma/results_<date-time-stamp> where <date-time-stamp> is
YY_MM_DD_HH_mm format (YEAR_MONTH_DAY_HOUR_MINUTE) when you started
the mma tests.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). MMA automation tests executes
and results get saved.
Change-Id: I6805fdb95b7ff919f9c8e967b748e4893a3f9889
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 68c0a531ba3fc335b92b17002e75412195b778c4
Original-Change-Id: I92db7ca47e1e3e581c3fbb413f11e2c3e6d19b6b
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313180
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:49249
TEST=Able to compile and boot to depthcharge
BRANCH=none
Change-Id: I042fce58526b1c2add6b930429bf397e0dcfad2c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 66a630db6132e0e8a736b635d65e9e11c269b54a
Original-Change-Id: Ie2b6f59b3dbbac8117636c103d4d0acb782f4cb3
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333322
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14665
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is stale code from ipq806x, n/a for ipq40xx.
Hence removing it.
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: I2ac73677f77d4bfbc70f56c73a661cc2c22dd384
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f9796588648bc477f118282aad89037f0577f23
Original-Change-Id: I8bcf928ee23ac24a21b0e633e207354ea9fa0511
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333299
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14664
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Implement reset using PSHOLD and remove watchdog
based reset not needed for ipx40xx.
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ic2fa0e7676604f36a99750b4bda53195199ebc69
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65c8b9dd633f0d402cad7d609563c8aac9bf5115
Original-Change-Id: I8f0ea3c1b71e86a7ca733965ecbec6954a52f6e3
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333298
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14750
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: 35c0e6046899dc1af03736ae9fa77f9eeec7f668
Original-Change-Id: I681e92fa673c1d3aee2974a7bba5074e2bfd6e02
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333297
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Enable UART on ipq40xx
- BLSP/UART Clock configuration
- GPIO Configuration
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: 7bba1fc7f50e7aeb4e7b37f164e85771e53f47e6
Original-Change-Id: I474a0e97b24ac9b3f2cba599cd709b6801b08f91
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333300
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I5e31d036ee7ddcf72ed9739cef1f7f7d0ca6c427
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14667
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Implement reset using PSHOLD and remove watchdog
based reset not needed for ipx40xx.
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibd3f9958682ed2e85e778976df3a8e124a7441fd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65c8b9dd633f0d402cad7d609563c8aac9bf5115
Original-Change-Id: I8f0ea3c1b71e86a7ca733965ecbec6954a52f6e3
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333298
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14663
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove a semicolon which shouldn't be there.
Change-Id: I38f785fa13ea9fee91813f165a085ff54e1b75fb
Found-by: Coverity
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14755
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=Compiles...
BRANCH=none
Change-Id: I76a24bc9b3cec53d5c10ecd86e5c8e45285e9632
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ab1717ff020d564abffcee208b6587e1ae2f950
Original-Change-Id: I2d155e80424d1c1837eb35703bd42ff3244e112a
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333306
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14662
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=Able to read content from SPI NOR, with boards having Giga Device SPI Flash
BRANCH=none
Change-Id: I67dc981a8c0270d55b01bdc4506139cccd8e90a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 417701816e8a298ba999d2c2d0d058cf7b54fb6f
Original-Change-Id: Id09ef68b13c53a2ab44f77c12dad39b505c81071
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333320
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14661
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
DRAM initialization on gale requires ipq blobs to be
loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is
initialized and contains selected region info, else it falls back to
vboot work buffer.
Since cbmem_find calls into cbmem_top to identify the location of
cbmem area, board/chipset is expected to return NULL until the backing
store is ready, which in this case until DRAM is initialized in
romstage, return NULL for cbmem_top.
BUG=chrome-os-partner:49249
TEST=Able to compile and boot to depthcharge. Doesn't crash in
imd_handle_init_partial_recovery
BRANCH=none
Change-Id: Iaac24252ee4fb9f59d767730bf9dd68baa42a68f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4849c15dee2d3782ede4ee4157e432bd4d5602f0
Original-Change-Id: I3722b7ab5a6585a250138c828eb3d7919b0c1178
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/335425
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14660
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=Recovery swich functions correctly.
BRANCH=none
Change-Id: I88bb973a82133d8bab6b79fd49c8052f64937473
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c8d319f65ee75e3c01e63c44249c7c7871a77518
Original-Change-Id: I2f62f2549c519f52c12c351dcb881a088671934a
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/334414
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14658
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update the memory to map to align with the internal memory region
map of IPQ40XX
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: e33712a729ef9831508c2e9aae81d0b32495b681
Original-Change-Id: Iba1c5281a2fbda4ab96126676b901ba71f6b28e0
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333295
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Update DRAM address ranges
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: 9150c125cb82f8dccb1347d898106703d85a5192
Original-Change-Id: Ic48d3e3f46a7c13a009a5cbed20984bd253eb85b
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333296
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Iea40484751a1c0439ed511319ef09a0254eba757
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14654
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This avoids issues the Makefile can have when running the createxbl.py
script directly.
BUG=none
BRANCH=none
TEST="emerge-gale coreboot" works
Change-Id: I78b6b0cd4d64c022cbe02fc40202da382e1f1ec7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5351abafcc4bfe5de74d3242a907e86d3aa94bbd
Original-Change-Id: I87b8c9991cfc4d5a14903ec565e6a05281b00c82
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338652
Reviewed-on: https://review.coreboot.org/14653
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249
TEST=Compiles...
BRANCH=none
Original-Commit-Id: bf907395f4abe859489276e793d9662c8594ff9b
Original-Change-Id: I132bfe667f9b4fad32ed7b14091c4523020183d0
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333309
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Update build script util path
BUG=chrome-os-partner:49249
TEST=Able to boot and reach depthcharge
BRANCH=none
Original-Commit-Id: ffd5fc7a92dae6c5ae11ad7fc85d55dac47b3b3b
Original-Change-Id: I7a8011fc9ba2ac25d795d12b61eb9205e414e0c5
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340182
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: If41b5faab7952b1017877a91e4cf281ee4ce99d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14652
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Copy 'storm' files as a template
BUG=chrome-os-partner:49249
TEST=None. Initial code. Not sure if it will even compile
BRANCH=none
Original-Commit-Id: 4bfabf22cb33ac2aacff0ebeed54655664505148
Original-Change-Id: I94e361911b89c5159b99f3d00efbcda94f763e71
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/333177
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
google/gale: Remove unwanted config option
2016.02 doesn't seem to like CONSOLE_CBMEM_DUMP_TO_UART
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: 44b91a8f83515936156206f9f273e0e5c62c3f17
Original-Change-Id: I9294ff602a05e4c9573fee3b9b51f9cc5305e192
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333302
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
google/gale: Update ipq806x/storm references
Since the files were taken from ipq806x/storm as
template. Update those references to reflect
ipq40xx/gale.
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: fa5962b757dbb6cc9e1e6d1e33e1e09ec6cb4cd2
Original-Change-Id: Ia330367a0547ac4306ef2514dc1305e2d65f80e4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333292
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
google/gale: Update fill_lb_gpios for new scheme
This updates fill_lb_gpios to follow the new scheme introduced
in CL:337176.
BUG=none
BRANCH=none
TEST=chromeos.c compiles successfully for gale
Original-Commit-Id: 635d7fd71d91552bd7470faeb5637ba1a727f940
Original-Change-Id: I6f98325918b350645b9c19b71125bc12a54953ab
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338651
google/gale: Add '.fmd' file
BUG=chrome-os-partner:49249
TEST=None. Initial code. Not sure if it will even compile
BRANCH=none
Original-Commit-Id: 474de31f7ed0adbe54251ca363e685019091b4e7
Original-Change-Id: I4019b110af676090e8751b315dadc5b601a56178
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333291
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Iad8e010371f3b9b92ab26eee4ba35c4f16d3732c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14642
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:49249 chrome-os-partner:50928
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: a48131897217a6e48927d5aafc855a86551c35ca
Original-Change-Id: Ia7bab63e5abfb99ab0c03e0e2879149597b7355f
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333294
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Add Kconfig option for SBL binary path
BUG=chrome-os-partner:49249
TEST=Compiles...
BRANCH=none
Original-Commit-Id: 8f0899e3c69737ec7ba579979dae342673bf3962
Original-Change-Id: If199f755106dc58b55ee0499e05304f0ea117bee
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333307
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
soc/qualcomm/ipq40xx: Add rules to combine vendor binary and CB binaries
BUG=chrome-os-partner:49249
TEST=Compiles...
BRANCH=none
Original-Commit-Id: d4b49d37c5b6f86a3bc360051904175111e1db2b
Original-Change-Id: I85fde202213b47d5e7c9af3a8d920da20cf456fa
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333308
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I91b873894975f0a88babc2e2ecdbe5676ee17c0b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14649
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Copy 'ipq806x' files as a template
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: dc6a5937953fe61cd4b5a99ca49f9371c4b712d4
Original-Change-Id: If171fcdd3b0561cb6b7dab5f8434de7ef711ea41
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/333178
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
squashed:
soc/qualcomm/ipq40xx: Update ipq806x/storm references
Since the files were taken from ipq806x/storm as
template. Update those references to reflect
ipq40xx/gale.
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Original-Commit-Id: c6c76d184cc92c09e6826fbdc7d7fac59b2cb69b
Original-Change-Id: Ieae1bce25291243b4a6034d37a6949978f318997
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333293
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ie5794c48131ae562861074b406106734541880d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14644
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie57b0b7844f28671b8d6a8efe9231a47bfb8f805
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14745
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LCD panel type is read using 4 GPIOs. Of these 16 possible
combinations only 5 are supported right now. If the GPIO setting encodes
an unsupported panel type, there will be no matching hwinfo.hex in cbfs.
Therefore it makes no sense to try to initialize the DisplayPort-2-LVDS
converter. Leave the function instead in this case.
Change-Id: If8c67a3f5be762758d516c4939dd1de4ff1c8ba5
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14743
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
File buildOpts.c is a can of worms, pull platform memory
configuration in to OemCustomize.c. This array should be
assigned at runtime instead of linking a modified defaults
table.
Change-Id: I73d9d3fbc165e6c10472e105576d7c40820eaa6a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14528
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are other things besides PCIe port configuration that
require board specific hooks.
Change-Id: I0923651487b9ed5f6f7569ce08e02d993fa5f976
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14527
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The board information file incorrectly listed an LPC ROM.
Fix the information file to show the correct SPI ROM.
This patch changes a human-readable file only, and does not
alter functionality.
Change-Id: Ib5c1789fa636354f2b6c92faf44b45b32d1ec544
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14742
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The existing DIMM size calculation for DDR3 was incorrect. Use
the recommended calculation from the DDR3 SPD specification.
Change-Id: Id6a39e2b38b5d9f483341ebef8f2960ae52bda6c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14739
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I5373be7ab55ac3c4f2e4dd753c6ad8e91712ff7e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14738
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
While some stubs existed before this patch to handle non-ECC
memory initialization, there were a number of ECC detect unaware
sections of code. Add ECC support detection to those sections.
Change-Id: I56dad8a0f6833b2f42796212afb9777e9cc73d6d
Tested-On: ASUS KGPE-D16
Tested-With: 1x Opteron 6262
Tested-With: 1x SuperTalent 4G non-ECC DIMM in slot A2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14737
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Select NO_STAGE_CACHE so that ramstage is not cached for
resume.
Change-Id: I9ca71686e0f617bb24713ec9ba07b5255c218f66
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allow the platform to override the input clock for the UART by
implementing the routine uart_platform_refclk and setting the Kconfig
value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk
routine which is disabled when UART_OVERRIDE_REFCLK is selected. This
works around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Allow the platform to override the input clock divider by adding the
uart_input_clock_divider routine. This routine combines the baud-rate
oversample divider with any other input clock divider. The default
routine returns 16 which is the standard baud-rate oversampling value.
A platform may override this default "weak" routine by providing a new
routine and selecting UART_OVERRIDE_INPUT_CLOCK_DIVIDER. This works
around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Ieb6453b045d84702b8f730988d0fed9f253f63e2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of using a hardcoded address for PMC device BAR0, read it
dynamically. This allows the allocator to move the BAR without
needing a fixed resource. Note that we cannot do the same for the
ACPI BAR (index 0x20), as it cannot be read back.
Change-Id: If43e1ccb693ffb17b78bdd76140a0849493a0010
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14633
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Pass the UART identifier to CorebootPayloadPkg
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: I9db1c31c3544d56b66f5a79ac8c3acee41788983
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14610
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Extend the serial port description to include the input clock frequency
and a payload specific value.
Without the input frequency it is impossible for the payload to compute
the baud-rate divisor without making an assumption about the frequency.
This breaks down when the UART is able to support multiple input clock
frequencies.
Add the UART_PCI_ADDR Kconfig value to specify the unique PCI device
being used as the console UART. Specify this value as zero when the
UART is not on the PCI bus. Otherwise specify the device using bus,
device and function along with setting the valid bit.
Currently the only payload to consume these new fields is the EDK-II
CorebootPayloadPkg.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: Id4b4455bbf9583f0d66c315d38c493a81fd852a8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14609
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The IPQ40xx Primary Boot Loader (PBL, i.e. Boot-ROM) expects an
ELF in the boot medium to load and boot. These scripts combine
the Secondary Boot Loader (SBL) and Coreboot ELF to an image as
expected by the PBL.
BUG=chrome-os-partner:49249
TEST=Able to boot and reach depthcharge
BRANCH=none
Change-Id: I5d02b7f1f58bb23d81a3e19fb9b78f3a999b89f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 819c7f2a810ca2880718ba14f2451f06eef4d98b
Original-Change-Id: I017207b2d4108de150853f421aa7bcfd0e12e9a4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340181
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb
Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333304
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14656
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We need ensure the bl31 base is greater than 4KB since there's
the shared mem for coreboot.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot to kernel with atf patch
Change-Id: I44cf436b3072f03b93da4a19227dcc540d7513db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a462f604c284c84bd8c5a0420e75eeae5035b382
Original-Change-Id: I55ec134762bb6bcbc91937ad5763617d7488490b
Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342334
Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14741
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
