| Age | Commit message (Collapse) | Author |
|---|
|
Move the sustained_power_limit_mW setting from the baseboard
to variants. This setting will be needed before STT is enabled,
but once STT is enabled, this setting should be removed.
BUG=b:265267957
BRANCH=none
TEST=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I7b9779600cfa8c7581732e936a714728fd618d20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I82c2016d9dfb39ff7b372815737d4ae62875340c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73373
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on taeko, taeko must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for taeko so that it will use the RPL
FSP headers for taeko.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot taeko to kernel.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Cq-Depend: chrome-internal:5544049, chromium:4302529
Change-Id: Ic97400555dabb237325e7c4a8d5edcbb4779cdb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This board is based off b75pro3-m, which is very similar. Compared to
it, it just lacks a COM1 header, and the secondary ASMedia SATA3
controller.
Tested with:
CPUs:
- Core i5-3330
- Core i5-3470
- Core i7-3770
RAM:
- single bank 4GB CL11
- two banks 4+4GB CL9
- two banks 8+8GB CL10
OS:
- Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72)
Working:
- GRUB2 payload with embedded default config for boot from USB, disk
- UEFI EDK2 payload
- Intel ME stripped
- Native raminit
- Integrated graphics with libgfxinit (HDMI, DVI and VGA)
- (boot from) SATA2, SATA3, ports
- Rear USB 2 and 3 ports (supports boot)
- Internal USB 3.0 ports
- Realtek GbE NIC
- 2.0 channel audio via lineout jack output
- ACPI (power button triggers OS event)
Untested:
- Internal USB 2.0 ports
- eSATA port
- 7.1 channel audio
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ia6a6eb3e922920f4afbcb7828cd2b779b9caebcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73097
Reviewed-by: Kevin Keijzer
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The legacy ACPI CPU control registers in IO space where the first 4 IO
locations control the CPU throttling value don't exist any more on the
Zen-based CPUs. Instead this IO address is written to MSR_CSTATE_ADDRESS
in set_cstate_io_addr which will cause accesses from the 8 IO addresses
beginning with ACPI_CSTATE_CONTROL to be trapped in the CPU core. Reads
from those IO addresses will cause the CPU to enter low C states.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c34e201cc0add1026edd7a97c70aa57f057782b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Finally figured out why ACPI_GPE0_BLK only being 4 bytes after
ACPI_CPU_CONTROL won't work and its due to the CPU trapping 8 IO
addresses from ACPI_CPU_CONTROL on for C state control. This is set up
in set_cstate_io_addr by writing the ACPI_CPU_CONTROL value into
MSR_CSTATE_ADDRESS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iedf53bbdae6ca65224601aad5cd1163df4b54131
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Picasso and newer don't implement the P_CNT register to control the CPU
duty cycle and also trap the C state control IO addresses directly in
the CPU, so those won't reach the FCH. This register is unused in the
Picasso code and not even defined any more in the Cezanne PPR. The
Picasso PPR does define this register, but since it's useless and might
even just be a leftover form a pre-Zen CPU generation, drop the define.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3820db542c4714a100c7d36de673daa1a06e4a67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the duty_offset and duty_width FADT field in
acpi_fill_fadt for all SoC except Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib63b24891d44298841153dfc500b030619e1a5ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Picasso neither has the corresponding P_CNT register implemented nor
writes a _PTC ACPI object that would specify the P_CNT register. The
Picasso UEFI reference code also sets the duty_width FADT entry to 0.
This also aligns the Picasso code with the Cezanne code in this regard.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I74645e5c4e54a2ad6bc7f9e72f5f656027a79860
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the pstate_cnt FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If3ddb466de1d437361d811e45e328a1dbff02fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the mon_alrm FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabb5fc7367f1e4e7acea1a58abdb643fc46ca776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: I39fbcba60a0fbdbed9f662119ed7692c0a0fd30e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The ASRock B75 Pro3-M port was lacking a cmos.default and cmos.layout,
which means nvramtool could not be used to change any nvram values, and
the defaults were always being used.
I have "borrowed" the files from the similar h77pro4-m port, which
work fine for the b75pro3-m. I can now adjust things like gfx_uma_size
and power_on_after_fail, which are quite useful to be able to modify.
Additionally, this board did not have a data.vbt, so I extracted
vbt.bin from the VGABIOS and added it.
Change-Id: I40822f2f7b013b7ac0658d66d7972b447066d593
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73451
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
On the ASRock B75 Pro3-M, resuming from S3 has always been broken;
see commit 928c6c6336f2 (mainboard/asrock: add ASRock B75 Pro3-M).
This was because 3VSBSW# was not enabled during S3, causing the
board to reboot instead of resume. This change enables 3VSBSW#
during S3, which leads to S3 resume working normally.
Another issue with this board was that hardware monitoring was not
working. The nct6775 Linux kernel module could not be loaded, due to
the device having a base I/O port of 0. This change also enables the
Super I/O properly, so that sensors-detect can find the sensor and
the kernel module can be used.
Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skyrim does not have a cardbus socket, so disable it.
Maybe cardbus support shouldn't be enabled by default?
BUG=None
TEST="PC Card (PCMCIA) is supported" no longer shows up
in dmidecode output.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic941b075e8b5082b5e61e728a77fd79c0ebba35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Only Frostflow supports the stylus, so remove the gpio-keys ACPI node
from Skyrim.
The Kconfig value DRIVERS_GENERIC_GPIO_KEYS is still enabled for all
Skyrim variants, since coreboot will drop the driver from the BIOS image
if there are no references to it (in the devicetree). If some other
design ends up using the stylus in the future we won't have to bring it
back.
BUG: none
TEST: build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I9ffe215741b72b678d74405769f35167d8ded4b5
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add a config "USE_NAU8318" to enable NAU8318 support.
NAU8318 is another speaker used in Geralt. NAU8318 supports beep
function via GPIO control. So we configure the GPIO pins and pass them
to the payload.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a config "USE_MAX98390" to enable MAX98390 support.
MAX98390 is an I2S smart amplifier used in Geralt. It is also the
default speaker for Geralt reference board.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable bus protection for display to avoid bus hang and incomplete bus
transaction.
BUG=b:264204465
TEST=test firmware and kernel display pass for MIPI panel on geralt.
Change-Id: Iac61a69f2b84966dd468442daaa59d83eec775aa
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73411
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add minimum device tree. Leave IOs default disable to optimize variant
override complexity.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibb056c07193b4265352a9ec74829dcf02a9340bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Bus protection is a HW mechanism to avoid bus hang and incomplete bus
transactions. Bus protection HW must be enabled while the receiver of
the transaction is not able to respond.
BUG=b:264204465
TEST=build pass
Change-Id: I14aa63c4934073a14552cef64f40657d0197bbe1
Signed-off-by: garmin chang <garmin.chang@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73375
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The XHCI device functions currently use functions that require a
access to the device tree. Create variant of these functions that can
operate with a resource* as an argument and refactor the existing
device*-based functions to operate by calling the resource*-based
variants. This is useful for stages like SMM that may not have access to
the device tree.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on skyrim device, verified that XHCI ACPI tables are still
generated correctly.
Change-Id: If5a74f9529d5dc6031ec968ef5f40a9cad5ffbc4
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
In certain cases data within protected memmory areas like SMRAM could
be leaked or modified if an attacker remaps PCI BARs to point within
that area. Add support to the existing SMM runtime to allow storing
PCI resources in SMRAM and then later retrieving them.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I23fb1e935dd1b89f1cc5c834cc2025f0fe5fda37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Hook up microcode from 3rdparty repo for:
- 06-ba-02 (CPUID signature: 0xb06a2)
Change-Id: Icb2fc9350ebc33ef150f1ab5df1006ed956478d6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Remove the last slash '/' from directories in excludelist, so that they
will be correctly filtered by grep.
Fixes:
grep: util/goswid: Is a directory
grep: util/nvidia/cbootimage: Is a directory
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I90cc2cff9a98bbd0af344156332b970bfd6430b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add new ram_id:0011 for Hynix H58G56BK8BX068.
Add new ram_id:0100 for Hynix H58G66BK8BX067.
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
H58G56BK8BX068 3 (0011)
H58G66BK8BX067 4 (0100)
BUG=b:270629852
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: Ida5c8354af71cd92c056a33e38d1fadfc5704977
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73252
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Because SPD tool now supports 8533Mbps, so modify speed to regenerate
the SPD file for Hynix H58G66BK8BX067 and H58G56BK8BX068.
BUG=b:263189532, b:270629852
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: I813fc1495836dbe33de426cf41a1f58c8e8a046e
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73251
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
According to thermal_table_0215, adjust DPTC and STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Id7df3f9bfa3f0e1337c502bc7db9e09e12cd956a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73081
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stt settings for dptc tablet mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the clamshell/tablet mode.
Run the WebGL aquarium with 5000 fish and verify that there is
no power drop peak.
Change-Id: Ib4aad3af8761b20084717b15a462edf4704b83cc
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73205
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
The SPL parameter for DPTC settings is not available for STT-enabled
platforms. It needs to be removed to avoid confusing STT calculations.
BUG=b:265267957
BRANCH=none
TEST=Run the WebGL aquarium with 5000 fish and verify that
there are no power drop peaks.
Change-Id: I8e6dad7d24883f8aadce83ebac401ecd4137d61a
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
On platforms with more than 255 cores the ACPI CPU string
would overflow and generate duplicates. Fix that by changing
the string to hex and use 3 digits.
Test:
Able to boot without ACPI errors on IBM/SBP1 which has
384 actives cores.
Change-Id: I1887928da0c049c27e2ec129f49051b24048b33b
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
oryp10 is nearly identical to the oryp9, with the differences being:
- Uses DDR5 RAM instead of DDR4 RAM
- Uses Realtek ALC1306 instead of TI TAS5825M
- Has an option for OLED display
Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Oryx Pro 9 (oryp9) is an Alder Lake-P board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- Both M.2 NVME SSD slots (with MZVL2500HCJQ)
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- 3.5mm microphone input
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.1.11
- Internal flashing with flashrom v1.2-1203-gf4ddd3234330
Not working:
- Discrete/Hybrid graphics
- HDMI output (requires NVIDIA GPU)
- Mini DisplayPort output (requires NVIDIA GPU)
- Detection of devices in TBT slot on boot
Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Fixes detection of the on-board RAM (Samsung K4AAG165WA-BCWE) on the
System76 Lemur Pro 11 (lemp11).
Change-Id: Ibe56c0f2b81d660303429cd2e21a7bb6cd433da5
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Lemur Pro 11 (lemp11) is an Alder Lake-U board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- DIMM slot (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- M.2 SATA SSD (with WDS100T2B0B)
- All USB ports
- SD card reader
- Webcam
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headset + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.1.11
- Internal flashing with flashrom v1.2-1203-gf4ddd3234330
Not working:
- On-board RAM: Requires CB:65567
- Detection of devices in TBT slot on boot
Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
BUG=b:230398487
BRANCH=none
TEST=Verify USB-A device could wake up Moli.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I1c8daf62dabe674a39b1416d886f9e470ae23a5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73174
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align support for enable wake-on-usb attach/detach as was
introduced in Cannon Lake in commit 811284125f0a
("soc/intel/cannonlake: Add UWES ASL into xhci.asl").
This adds the USB Wake Enable Setup (UWES) ASL blocks
required to inform the OS about plug wake events bits
being set in the PORTSCN register configured by devicetree.
BUG=b:230398487
BRANCH=none
TEST=Verify USB-A device could wake up Moli.
Signed-off-by: Scott Chao <Scott_Chao@wistron.com>
Change-Id: Icbc427a89413f5fe3a4a533135cc2c39349a9580
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73173
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Used by default for all boards with TPM2 which don't specify log
format explicitly.
Change-Id: I0fac386bebab1b7104378ae3424957c6497e84e1
Ticket: https://ticket.coreboot.org/issues/422
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Used by default for all boards with TPM1 which don't specify log format
explicitly.
Ticket: https://ticket.coreboot.org/issues/423
Change-Id: I89720615a75573d44dd0a39ad3d7faa78f125843
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add custom backlight levels for all models except:
- addw1/addw2: Uses an OLED display
- bonw14: Does not use the iGPU
Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I7ef4af2cde4f3260f2bc2efdbf85569b0eb147fb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Move the implementation of smbios_system_wakeup_type from the mainboards
to the EC for all models that use System76 EC (everything except KBL).
Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The skolas baseboard is no longer needed, so this change removes the
baseboard files for skolas and adjusts the config settings to that
variants that used to select BOARD_GOOGLE_BASEBOARD_SKOLAS now
select BOARD_GOOGLE_BASEBOARD_BRYA and SOC_INTEL_RAPTORLAKE.
BUG=b:271470530
TEST="emerge-brya coreboot chromeos-bootimage", flash image-skolas.bin
onto a skolas and verify it boots to kernel.
Change-Id: I34cae7e471851aa52a64ce3af7bb506dc67f806b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Phoenix' implementation of map_oprom_vendev uses this simplified
implementation, so port this back to Cezanne too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0aa3a0fed37c6cba15a668ada639f5fd0c212d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73387
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is causing some issues, so disable it until those issues can be
resolved.
BUG=b:271437658, b:271199389, b:270077971
TEST=Screen always lights up on boot & after S0i3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id4aa441e4b4f76168f8243b6abafa1cf1ea08dbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For platforms using X2APIC mode add SRAT x2APIC table
generation. This allows to setup proper SRAT tables.
Change-Id: If78c423884b7ce9330f0f46998ac83da334ee26d
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On the 4 socket IBM/SBP1 platform with 384 cores lots
of space for ACPI tables is required.
Bump MAX_ACPI_TABLE_SIZE_KB to 400 to fix CBMEM corruption.
Change-Id: Ifbd79e84097231b41f900425a2e8750dce71a25a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As discused earlier, the callback name 'mb_adjust_cfg' was considered
too generic. The new naming is chosen to be consistent with other
drivers' callback names designed to be used at mainboard level.
Also other functions, namely 'mb_get_edid' and 'mb_select_edid_table'
are renamed accordingly.
BUG=none
TEST=Builds for siemens/mc_apl{1,4,5,7} and siemens/mc_ehl boards
complete successfully.
Change-Id: I4cbec0e72e5f03e94df0faa36765d1a6cd873a7a
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch adds base code for the Protectli VP2420. The GPIO
config has been extracted with inteltool from the stock
firmware and then parsed with intelp2m. As of now, the platform
runs with edk2 with no apparent issues.
Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com>
Signed-off-by: Artur Kowalski <artur.kowalski@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ia00c27117d48b76db306d3f988f159fc5d50e4a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
CXL (Compute Express Link) [1] is a cache-coherent interconnect
standard for processors, memory expansion and accelerators.
CXL memory is provided through CXL device which is connected
through CXL/PCIe link, while regular system memory is provided
through DIMMs plugged into DIMM slots which are connected to
memory controllers of processor.
With CXL memory, the server's memory capacity is increased.
CXL memory is in its own NUMA domain, with longer latency
and added bandwidth, comparing to regular system memory.
Host firmware may present CXL memory as specific purpose memory.
Linux kernel dax driver provides direct access to such differentiated
memory. In particular, hmem dax driver provides direct access to
specific purpose memory.
Specific purpose memory needs to be represented in e820 table as
soft reserved, as described in [2].
Add IORESOURCE_SOFT_RESERVE resource property to indicate (memory)
resource that needs to be soft reserved.
Add soft_reserved_ram_resource macro to allow soc/mb code to add
memory resource as soft reserved.
[1] https://www.computeexpresslink.org/
[2] https://web.archive.org/web/20230130233752/https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.32&id=262b45ae3ab4bf8e2caf1fcfd0d8307897519630
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ie70795bcb8c97e9dd5fb772adc060e1606f9bab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52585
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
BUG=b:270529665
TEST=Verify the build and boot on Rex board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I0e3d3312c546a2a468fb906a08b8d3ec3e96c46a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
To support 32M flash, the non-vboot also need to split amdfw. Just as
the deleted comment says, we need this feature now.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Ic058cfaeebd1a947227cfa9be2db4eb22702aa28
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
To support 32M flash, the non-vboot also need to split amdfw.
The amdfw.rom is the default filename added to CBFS.
Keep the default filename and then we don't have to change all the
CBFS definition.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Id77b11422d4549cf57a1cd8980c7a9cf3597d1bc
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Hook up microcode from 3rdparty repo for:
- 06-b7-01 (CPUID signature: 0xb0671)
Verified microcode blob was in CBFS on Clevo PD50SNE (system76/serw13),
which has an i9-13900HX.
Change-Id: If91ff9233a5e1dd1db76edf33a76c55f5dddc9b4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie3493af340a42035ee537d83b1542be1b87d8f9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Handle the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE.
Previously, the EC sent the host event EC_HOST_EVENT_MODE_CHANGE when
body detection changed between lap/desk mode. However, that event is a
wake event, which resulted in spurious AP wake events being triggered
when the EC detected lap/desk mode changes while the AP was suspended.
To resolve this, the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE was
added, which will not be a wake event. This CL adds handling for the new
event to acpi/ec.asl to switch DPTC tables when a change is detected.
BRANCH=none
BUG=b:261141172
TEST=bodydetectmode on|off, verify host event is received
Change-Id: Iabeb7891489a209f45504804355f1fa817082976
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73298
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
There were two wrong comments in all mc_ehl gpio.c files. This patch
corrects the incorrect comments.
Change-Id: Iea356db177227d89b91be32a4e2367c612b77350
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72458
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard does not use security features like TPM.
Change-Id: Ieebbf12fc844573ffadb089da78062dd2033517a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The upcoming mc_ehl4 variant is the first Siemens Elkhart Lake mainboard
without a TPM. For this reason, the corresponding Kconfig switches must
be moved to variant level. To prevent Jenkins build from complaining,
the TPM is removed in the following patch.
Change-Id: Ic73ccd1b52e57c1cf1dd7337b0e28beaadbece8e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Measurements have shown that the automatic calibrated values for RGMII
output impedances are too low. For this reason, set the PMOS value to 16
and the NMOS to 13.
Change-Id: Ic3382889d3281faccb03819f9680a9763703b2a1
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73019
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides the functionality to set the RGMII output impedance
manually. To ensure that no race condition occurs, the driver strength
values for PMOS and NMOS should be written to the RGMII output impedance
calibration override register first and then the force bit should be
enabled with a second write to this register.
Link to the Marvell PHY 88E1512 datasheet:
https://web.archive.org/web/20230125074158/https://www.marvell.com/content/dam/marvell/en/public-collateral/phys-transceivers/marvell-ethernet-phys-alaska-88e151x-datasheet.pdf
Change-Id: I87fa03aa49514cdc33d2911d7f23386c8f69d95b
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
When the configuration of Marvell PHY 88E1512 is finished, then switch
the page back to 0 only once at the end of the Init function.
Change-Id: I9e516870a7c5928724df2bd3ac9c5c8f3249af2e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73017
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This mainboard is based on mc_ehl1. In a first step, it contains a copy
of mc_ehl1 directory with minimum changes. Special adaptations for
mc_ehl4 mainboard will follow in separate commits.
Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The commit fcff39f0ea47 ("vc/siemens/hwilib: Rename 'maxlen' to
'dstsize'") changed the 'dstsize' input parameter type from uint32_t to
size_t.
This patch changes also the return parameter, which is often directly
compared with the aforementioned input parameter value. This should
introduce no change on 32-bit builds and stay consistent across the
project in the case of 64-bit builds and avoid comparisons of integers
of different width here.
BUG=none
TEST=No changes to hwilib behavior on any of the siemens/mc_apl1 or
siemens/mc_ehl variants.
Change-Id: I0a623f55b596297cdb6e17232828b9536c9a43e6
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add a new parameter STT_ALPHA_APU' for each DPTC mode.
BUG=b:257149501
BRANCH=None
TEST=Check if the STT value matches the expected setting.
Change-Id: Ib27572712d57585f66030d9e927896a8249e97a7
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Add a new flag "--utc" to allow the user to choose if
elogtool should print timestamps in Local Time or in UTC.
It is useful for generating automated crash reports
including all system logs when users are located in
various regions (timezones).
Add information about timezone to timestamps printed
on the console.
Signed-off-by: Wojciech Macek <wmacek@google.com>
Change-Id: I30ba0e17c67ab4078e3a7137ece69009a63d68fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are
no longer connected to a native function.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The Common Clock Configuration (CCC) is a PCIe feature for cases where
the upstream and downstream device of a link share the same reference
clock. After a change in this setting a link re-training is mandatory
to make it effective.
On recent Intel platforms (tested on Elkhart Lake) the FSP code which is
executed before coreboot performs the PCI scan already enumerates all
PCI buses for its internal uses. While this is done, all the PCI express
features of a link are configured, which includes CCC. If the link
supports common clock, FSP performs the link re-training already. When the
execution flow is returned to coreboot, the same link treatment is
applied again (coded in 'pciexp_tune_dev()') and CCC is enabled a second
time, just a few milliseconds after FSP did this already.
Because enabling CCC requires a link re-training, there are two link
re-trainings on the PCIe link within a few milliseconds (one from the FSP
code and one from coreboot) which can lead to issues with a connected
PCIe device on this link. In particular, link issues were discovered
with a Pericom PCIe switch (PI7C9X2G608) on mc_ehl1 where the link has
stalled for a while after the second re-training. This in turn leads to
non-initialized PCI devices on the bus after coreboot has finished.
This patch checks if CCC is already enabled on a link and does not
perform the steps to enable it again in coreboot which safes a link
re-training (and thus execution time) and a potential link stability
issue.
Test=Check log output on mc_ehl1 which shows the following lines:
[DEBUG] PCI: pci_scan_bus for bus 09
[DEBUG] PCI: 09:00.0 [8086/1533] enabled
[INFO ] PCIe: Common Clock Configuration already enabled
Change-Id: I747fa406a120a215de189d7252f160c8ea2e3716
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73310
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The instructions and actual menu got a bit out of sync, or
were just inaccurate. This fixes the notes on the payload.
Change-Id: I22d6588ef3708e98a8fd9b0652b3f827ff9ff698
Signed-off-by: Daniel Maslowski <info@orangecms.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 3 (0011)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This adds support for Samsung K3KL6L60GM-MGCT chips.
BUG=b:270708359
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I64b2623bc8da94c1fd3a935ec5368cdc6e76505b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
H58G56BK7BX068 1 (0001)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9eea7e277628992be9b7768a678a50425444002a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The DRAM scramble feature enhances DRAM data protection. When it's
enabled, the written DRAM data will be scrambled and hence can prevent
the data from being hacked.
This feature would make debugging more difficult (for example ramoops
would be lost after reset). Therefore, add a new config to allow
enabling or disabling the feature from coreboot, without having to
maintain two versions of the DRAM calibration blob.
BUG=b:269049451
TEST=build pass and check scramble enable or disable successfully
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ib4279bc1cc960fae9c9f5da39f4448a5627288d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The DC boost bit was intended to be in the Controller Params word rather
than its own byte. Correct this error.
BUG=b:214581372
TEST=build
Change-Id: Ie65e57a351f0fc1f0c80ef320fd87043ee22916c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Server platform doesn't have S4 state so select DISABLE_ACPI_HIBERNATE
to remove S4 state from available sleepstates.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ie5ddb1a98cd5bbd854b915c93694d1ebcb9bddd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
The currently used panel type could work with 500 ms but increasing
the value to 1 second allows to use a wider range of LVDS LCD panels,
as many of them specify the delay of 1 s as minimum.
BUG=none
TEST=Test link stability using a panel with minimum re-power delay of
1 s.
Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The comment that the PchHdaAudioLink UPDs only configure GPIOs is
incorrect. Setting this GPIO to 1 or 0 will not change the HDA
GPIO configuration; it will make the sound work when set to 1,
or not work when set to 0.
Remove the incorrect comment and make the UPD configurable from the
devicetree.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6f27f41a4a4b3844a65d45d36aba37c3af1050a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Replace the SOC_INTEL_TIGERLAKE_S3 and SOC_INTEL_ALDERLAKE_S3 with
the D3COLD_SUPPORT symbol, as it allows for more granular control.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I07e8c84e5ad8f390bfbac017dd23736e7a6ced9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This filling does not need to be done separately.
Change-Id: I53051349923dce40f4fc3f747ab41a93a3798823
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
A few references to "--combo-capable" were left after commit 4bfb36ed68154d8ee6fc77a6b2bf79938cae9e8a
Change-Id: I6f425db2a8b86d7ad928baee6bc7b07e5190ba37
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73281
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the EFS data is being packed, the pointer should be at EFS
header.
After that, it should be at body location.
TEST=binary identical test on amd/birman amd/chausie amd/majolica
amd/gardenia pcengines/apu2 amd/mandolin
Change-Id: Ia81e2bdf9feb02971723f39e7f223b5055807cd8
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The latency values in the _CST package override the values in the
p_lvl2_lat and p_lvl3_lat FADT fields. In Picasso, Cezanne, Mendocino,
Phoenix and Glinda generate_cpu_entries generates the _CST packages for
each CPU device. The coreboot code for Stoneyridge doesn't generate _CST
packages for the CPU objects, but those are provided via the PSTATE SSDT
binaryPI generates and agesa_write_acpi_tables gets and adds to the ACPI
tables. The AGESA reference code also sets those two FADT entries to the
equivalents of ACPI_FADT_C2_NOT_SUPPORTED and ACPI_FADT_C3_NOT_SUPPORTED
so this also matches the AGESA behavior.
From the ACPI 6.4 spec: "Values provided by the _CST object override
P_LVLx values in P_BLK and P_LVLx_LAT values in the FADT."
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1116a3013576b18b6f521604d6b0a9d75b971e0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in
the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but
both mb/google/kahlee and the other amd mainboards using newer SoCs set
both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to
match the other mainboards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the ACPI_SCI_IRQ definition instead of a magic value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia860668b5c93b1b8882459d9f983cf3a23d16392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73321
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IRQ9 is used as ACPI SCI IRQ, so add a define for that and use it in the
code like it is also done in the other SoCs in soc/amd.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddb51d70c15ab1d7088f62b61e22510bd1b30b1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73320
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there's a define for the ACPI_SCI_IRQ 9, use the define instead of
a magic number in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c8f62929f3f66192698e10826d10329ef3d8cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73319
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the res2 FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa69ae61bea82acf66e7210c4103ef48e36dbdd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73318
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use enum cb_err to return an error/success state instead of an int in
get_nv_rdev and get_nv_rdev_rw.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I73706a93bc1dbc8556e11885faf7f486c468bea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73317
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The bool type is used although stdbool.h isn't included. Include types.h
which will include both stdint.h and stdbool.h
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5213ddae3ceb36e0b2e09f8ef3f7f414ebdf187f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73316
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The directory holds boards other than ADL-P, such as ADL-U and ADL-H.
Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
We need to considering the case the EFS header is given as a relative
address and the other, body location, is given as an absolute one. So
we convert both of them to relative and check the validation.
For relative address case, the location should be between
0 and data size.
Change-Id: I7898bfbca02f5eb1c0fb7c456dc1935bddf685b1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
If ctx.address_mode is "physical", it will keep as "physical".
If ctx.address_mode is "relative to table", it will be changed as
"relative to BIOS".
Because the "current table" is the whole flash, the code worked well.
TEST=Binary identical test on amd/birman amd/chausie amd/majolica
amd/gardenia pcengines/apu2 amd/mandolin
Change-Id: I9acb54cc5de149d8a705bb05bf351c44b7d3ced1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or
overridden by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Port of commit a182faeb88a0 ("soc/intel/alderlake: Hook up FSP hyper-threading setting to option API")
Change-Id: I0b3e1a4049312c6b1ec950382c92274e0350001f
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix typo in the comment for Common Clock Configuration.
Change-Id: Idd01e787458a9090d53b9a57547b8158480dcc16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP
section to cache the MRC training data in recovery mode.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the appropriate MRC_CACHE FMAP
section.
Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Use fw_config to probe fingerprint.
BUG=b:269986245
TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass
with 1000 reboot cycles.
Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on osiris, osiris must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL
FSP headers for osiris.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot osiris to kernel.
Cq-Depend: chromium:4290627, chrome-internal:5516851
Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
