summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-02mainboard/*: Use generic winbond romstage in place of w83627thgEdward O'Callaghan
Use the generic implementation of winbond in place of the model specific w83627thg_enable_serial() as so that it maybe removed later. Change-Id: Ice1a0dc428de9a3ddfb79e877fb03c7a8e09665f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5603 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01Build without ChromeOSKyösti Mälkki
Change-Id: I1da636573eed62ce693b984917084643787c094b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3978 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01ChromeOS: Use common fill_lb_gpio()Kyösti Mälkki
Change-Id: I2ba7a1c2b2e6ce2c00c9a2916141bed67930ba2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5586 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01device: Conditionally bypass oprom executionKyösti Mälkki
Builds with CHROMEOS can bypass VGA oprom when boot is not in developer or recovery modes. Have the same functionality available without CHROMEOS but with BOOTMODE_STRAPS. Change-Id: I97644364305dc05aad78a744599476ccc58db163 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5595 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-01ChromeOS: Remove oprom_is_loadedKyösti Mälkki
A global flag oprom_is_loaded was used to indicate to U-boot that VGA option ROM was loaded and run, or that native VGA init was completed on GMA device. Implement this feature without dependency to CHROMEOS option and replace use of global variable oprom_is_loaded with call to gfx_get_init_done(). Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4309 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01google/stout: Fix build without ChromeOSKyösti Mälkki
Currently we have no developer or recovery mode switches when building without ChromeOS. Change-Id: I49adfcd8408838cf581430970be5efcef11ba06b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5596 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-01Declare recovery and developer modes outside ChromeOSKyösti Mälkki
Move the implementation for recovery and developer modes from vendorcode/google/chromes to lib/. Change-Id: I33335fb282de2c7bc613dc58d6912c47f3b5c06c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4308 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-01device: provide option to always load PCI option romsKyösti Mälkki
Certain kernel drivers require the presence of option rom contents because the board's static configuration information is located within the blob. Therefore, allow a chipset/board to instruct the pci device handling code to always load but not necessarily run the option rom. BUG=chrome-os-partner:25885 BRANCH=baytrail TEST=Both enabling and not enabling this option shows expected behavior. Change-Id: Ib0f65ffaf1a861b543573a062c291f4ba491ffe0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/188720 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5594 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-30console: Fix UART selection promptKyösti Mälkki
Without this change, removal of default UART_FOR_CONSOLE entries under mainboard/ Kconfig will remove this option entirely from created .config file. Change-Id: I11422ddb8c51abca177f999936c995ae0c91c459 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5626 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-30baytrail: Add default _OSC methodDuncan Laurie
This is needed to let the kernel know it can control everything and not to disable features. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I40ff15bb931a9be7c31509ec84489083b5af0a82 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175629 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4939 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add root bus resource regionsDuncan Laurie
Populate the PCI mmio region from NVS TOLM variable. Other regions are fixed. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Iec8352b0464ad850a76bd1706c028628c477731d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175628 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4938 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add MCFG table to ACPIDuncan Laurie
This adds the PCI configuration region table to baytrail. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I0d975709a4a18d0f1c5e24581c9fd2190fe2996b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175627 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4937 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Clean up NVS regionDuncan Laurie
There is a lot of NVS allocated to things that are not really used. Most of these are removed and some are moved around. Thermals are expected to be handled with DPTF so I've removed that bit of code but have not yet cleaned up the thermal zone. I left in the SIO BARs since I think we will need those still even though they may need work still. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Id16ee67e6b3709a303c001afd72947147f938127 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175626 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4936 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add function to read top of low memoryDuncan Laurie
The top of low memory is also the start of the region where PCIe resources are allocated. This needs to be passed in ACPI but is only readable from IOSF. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Iad95335f72dc3e35b837bedb8d52d388c861a330 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4935 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Add reserved MMIO regions to ACPIDuncan Laurie
Add a length define for all the reserved MMIO regions and use them in the ACPI code to reserve the regions there. Add a region for the "abort page" documented in the EDS. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175624 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4934 Tested-by: build bot (Jenkins)
2014-04-30baytrail: Fix XHCI problems and re-enableDuncan Laurie
- a few clock gating bits were set improperly and were preventing the system from transitioning out of S0 state. - the XHCC registers were not getting the top byte set properly which includes things like DMA write request size and request boundary crossing control. This was causing memory corruption. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=build and boot kernel from USB on rambi with XHCI driver Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4933 Tested-by: build bot (Jenkins)
2014-04-30mainboard/: Avoid including early_serial.c from w83627hfEdward O'Callaghan
Following the reasoning of: dbbc136 mainboard/asrock/e350m1: Avoid including early_serial.c Change-Id: I5d729b90cf6713de2674fb00c726cd2944a3ab4e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5597 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30console: Move UART port defaults to mainboardKyösti Mälkki
Correct selection of UART depends of board layout, not the CPU internals, so default setting should originate from mainboard. Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5618 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30console: Drop EARLY_CONSOLE optionKyösti Mälkki
We have means to easily disable a specific console in romstage if necessary, so this global option makes little sense. The option was initially introduced as a work-around for build issues around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs. Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5607 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30allwinner/a10: Hide SoC specific UART functionsKyösti Mälkki
If platform has a component coreboot has to communicate with using one of the UARTs, that device would not be part of the SoC and must not use functions specific to a10 UART. Change-Id: Ifacfc94dfde9979eae0b0cfb723a6eaa1fbcd659 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5469 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-29towiki.sh Move vendor link to the first column.Rudolf Marek
It is not easy to see that there are two links, one to coreboot wiki and second to the vendor page. This change moves the vendor page link to the vendor column, separating it nicely. Change-Id: I3063be476231d04f833350043010a6e0001697e7 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/5593 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-29lenovo/{t60,x60}/devicetree.cb: Fix typo in Controller in commentPaul Menzel
$ git grep -l Cnotr | xargs sed -i 's/Cnotr/Contr/g' Change-Id: Iee826a8092dbf17f8a28b7eb7b6d183464c6e498 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5325 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-29crossgcc: Support OSX 10.9 built-in tar utility program.Andrew Wu
Unlike OSX 10.8, OSX 10.9 doesn't provide GNU tar program, and built-in tar program is bsdtar 2.8.3. bsdtar can build crossgcc toolchain. Modify buildgcc to support tar in OSX 10.9 (uname = Darwin). Change-Id: I093898f8f99e29918387f9b275a30af461a7e1be Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/5598 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-29src/mainboard/asrock/e350m1: Properly indent devicetree.cbEdward O'Callaghan
Trivial: clean up spaces to tabs to properly indent devicetree.cb Change-Id: Id5577139cfa039898af3b2158fdd6869ac9d2ec1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5612 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-29mainboard/kontron/986lcd-m: Remove a duplicate headerEdward O'Callaghan
Change-Id: I0dd50722c1ccbcb8a21b8fbab4d706d6b2f2b130 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5602 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-29util/board_status/board_status.sh: set its executable flagPaul Menzel
Change-Id: I58f6d356bf1625ee205a536ee95c08294891b123 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-29AGESA SPI: Fix Kconfig optionsKyösti Mälkki
Option AMD_SB_SPI_LEN leaked to non-AMD configs. Option SPI_FLASH is compulsory with HAVE_ACPI_RESUME. Change-Id: Ib84c4d9e4fdf670b32b0cae7280fcbb6d3aecaf5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5606 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-29SPI: Use common dependency in KconfigKyösti Mälkki
Change-Id: I11118a4fe1e05017349feae004f98a17bb02386b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5605 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-28superio/winbond/w83627ehg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: Ib9f981f43e047013f9cbe20a22246ee2ed3ecf50 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5589 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28mainboard/tyan/s8226: Remove redundant sio headerEdward O'Callaghan
Change-Id: I8d258c12d03e71fb525251104b4fa81596ad2187 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5599 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28superio/winbond/w83627dhg: Convert romstage to generic componentEdward O'Callaghan
Convert the serial init to the generic romstage component and corresponding boards using this sio. Change-Id: I36bcf38c4351130be1ed924ecfe606336d0433f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5588 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28mainboard/asrock/e350m1: Avoid including early_serial.cEdward O'Callaghan
Use generic winbond romstage serial init symbols instead of model specific implementation. We do this on a case by case basis as some boards are ROMCC and so need to #include .c files. This is a step to migrate non-romcc boards to a more generic superio framework. Change-Id: I56f6d9ec77cd21a612cbbdb48634543f34a2e72c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5591 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28superio/winbond/*: Provide common romstage componentEdward O'Callaghan
Following the reasoning of: cf7b498 superio/fintek/*: Factor out generic romstage component Change-Id: I3e889c0305c012e7556a5dd348e7f1e1ba629a9d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5587 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26superio/fintek/*: Factor out generic romstage componentEdward O'Callaghan
The romstage of Fintek Super I/O's is identical, leading to replication of essentially the same code prone to bitrot. Herein we consolidate the early pre-ram UART initialisation code into fintek/common, rather we leave the exceptions to be implemented under model/. More precisely we provide a well documented version of early_serial.c under fintek/common and select by way of Kconfig as a generic romstage component to Super I/O support. We leave future Super I/O's the option to implement `non-standard` initialisation code should such a (unlikely) need araise. A primary advantage is that new support for romstage serial is now trival to add. We also provide some Kconfig documentation while here. Change-Id: I3c62561558a62ece944a167ba302fb7076bba001 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26uart8250io: Fix build with DEBUG_SMIKyösti Mälkki
Change-Id: I5110af348d22c0abc940f0922854fdd7e0c7e2e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5574 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-04-26libpayload/endian.h: Provide alignment-agnostic enc/dec bytestreams.Edward O'Callaghan
Alignment-agnostic encode/decode bytestream to/from little/big endian. The le16enc(), le16dec(), le32enc(), le32dec() functions encode and decode integers to/from byte strings on any alignment in big/little endian format. See BYTEORDER(9). Change-Id: I73a174b9c02c467bc60590c5cd894dac58b8683a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5198 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26lippert/hurricane-lx: Kconfig cleanupPatrick Georgi
A Kconfig option defined instead of selected that really comes from somewhere else. Change-Id: I8730d12ed053520b794655e943c93583c441f3f1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5542 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26superio/fintek/*: Fix header styleEdward O'Callaghan
Remove some redundant includes. Fix repetitiveness in include guards and strip some misplaced tabs for whitespaces. Change-Id: I1f0bf6951cc6714f63e88b323754515fb02c089c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5572 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
Rename coreboot_ram stage to ramstage. This is done in order to provide consistency with other stage names (bootblock, romstage) and to allow any Makefile rule generalization, required for patches to be submitted later. Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26Get rid of HAVE_INIT_TIMER config optionFurquan Shaikh
There is redundancy in terms of use of init_timer. We have a Kconfig option to decide whether a board has init_timer as well as we use a stub for init_timer in places where we do not have any init_timer defined. Thus, remove the Kconfig option. Henceforth, all boards that do not have init_timer functionality can include a stub_timer if required. Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26superio/ite/it8673f: Remove poor implementationEdward O'Callaghan
Following the reasoning of: HASH superio/ite/it8705f: Remove poor implementation Change-Id: Ic0722116b84acf4f3c3ef4b18b961a56f0f50718 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5568 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26superio/ite/it8705f: Remove poor implementationEdward O'Callaghan
This super io support is poorly implemented and would not work for all boards since it hardcodes values. Since there are no users of it, remove for now pending a fresh reimplementation from scratch. Change-Id: I818a9f4d2ab106b989824e49cee49d79acd6041a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5566 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26superio/ite/it8716f: Rewrite from hardcoded base addrEdward O'Callaghan
Following the same reasoning as: HASHHERE superio/ite/it8721f: Rewrite from hardcoded base addr Removing hard coded magics and expose sio pnp api in romstage. Change-Id: I27433cb1a84b3641a6110ecf6bd5021e00769aba Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5565 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26superio/ite/it8721f: Rewrite from hardcoded base addrEdward O'Callaghan
Rewrite early_serial.c implementation to honour a passed base address in device_t, removing any hard coding of values. We also expose early sio init functions as romstage symbols to avoid falsely #including "early_serial.c" in romstage.c of board support. Change-Id: I521b8f7cf85173345b90745c6f2ab66e25429f5d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5561 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-22usbdebug: Add BeagleBone BlackKyösti Mälkki
Avoid some confusion as the selection of "BeagleBone" is not compatible with the product "BeagleBone Black". Change-Id: If73f80565cd26d2b41db972b4474ab85b609c1ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4289 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-04-22Drop drivers/generic/debugKyösti Mälkki
Not very popular nor useful nowadays. Change-Id: I3dc0f7aaf188950a43f5350d3a95669fbbdcfd94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4554 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-21southbridge/hudson: Initialize ACPI IO ports separate of FADTAlexandru Gagniuc
The ACPI IO ports, and the respective SMI (for HAVE_SMI_HANDLER), were initialized when the FADT table was written. This works well on a cold boot, but the ACPI ports are not initialized on S3 resume, as ACPI tables are not written. This will not work on S3 resume if the default ports are not what we set them, or if AGESA sets them to some other value. To solve this, move the port configuration to southbridge chip init. Change-Id: Ib4043f0fa5e20f08d320acd12ce84d4d789cd035 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5559 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21hp/pavilion_m6_1035dx: Map PCIE PME sources to GPE 0x18Alexandru Gagniuc
The PCIE PME pin from the APU is connected to GEVENT8, but the northbridge's ASL hardcodes this to GPE 0x18. Adjust the SCI map accordingly. Change-Id: Ie395e62919f6e97ef9bcc45c736f9debf4e09ba0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5556 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21hp/pavilion_m6_1035dx: Map USB and PWRB PME sources to GPE 11Alexandru Gagniuc
Hudson ASL files assume the USB power event notifications are mapped to GPE 0xb. Since that GPE is not used on this board, map these events to GPE11. This GPE is already handled in ACPI via Method(_L0B). We adjust this method to also notify the XHCI controller at PCI 10:0. Change-Id: If33dd4bb5830820227f7c8b34594886cfae37282 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21AMD hudson and yangtze boards: Let mainboard declare power buttonAlexandru Gagniuc
The power button was declared by hudson's ASL as \_SB.PCI0.PWRB, and always had the wake source declared as GPE3. This is not the correct wake source for all boards. On some laptops declaring a wake source is not needed, as the wake mechanism is handled by the EC. Move the declaration of the power button to mainboard ASL files, and scope it as \_SB.PWRB . This also makes the naming consistent with the examples in the ACPI spec. The wake source for the PWRB of HP Pavilion M6 1035dx is removed, as it is incorrect. Change-Id: I9c76566025e7f200c0376673f6c6ea299afa4a5d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-21mainboard/asus/m5a88-v/devicetree.cb: Fix formattingEdward O'Callaghan
Strip incorrect comments pretaining to the superio, and replace spaces with tabs. Change-Id: Ib3f6094c552777552d0ec06e3236210ee2e7b05d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5562 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Do not re-init EC and lid SMI on S3 resumeAlexandru Gagniuc
It's not needed, and puts the EC back into APM mode. The EC does not shut down during S3 sleep, so we don't need to re-initialize it. Lid SMI will have been disabled in the switch to ACPI mode, don't re-enable it. Change-Id: I2c06df140f63427dac32ae095d29e68f64135358 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5555 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20southbridge/hudson: Remove redundant definitions of ACPI IO portsAlexandru Gagniuc
The ACPI IO ports were defined twice, and used inconsistently. Only keep one of the definitions for consistency. Change-Id: If5744f9375fdaa97ceb9ba03dca8aa825eecf159 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5558 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20southbridge/amd/agesa/hudson: Refactor SPI controller driverAlexandru Gagniuc
The SPI controller driver used numerical offsets to access SPI registers, making it unreadable without the datasheet. Use less magic and more #defines to improve readability. Change-Id: I8a1f11645cfce027e5df7a41a98c70249695889e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5557 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Suspend/resume on lid close/open with ACPIAlexandru Gagniuc
This patch completes ACPI support for the lid switch. The lid SCI now notifies the OSPM of the status change when the lid is closed or opened, allowing system to suspend. The wake source is also declares, and the system wakes when the lid is opened. The system resumes successfully, but the display still does not come back on. Change-Id: I803c4fc64e15f8d1a90791ec246af66604646d8b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5549 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Add GEVENT to GPE SCI mapping tableAlexandru Gagniuc
Each GEVENT pins can be mapped to a specific GPE via the SCI map. The default mapping is not appropriate for this laptop, so use the AGESA functionality to map currently known events. Change-Id: Ifa50bf000cfc8e77a6a4d84752f89838f165f7a0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5548 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20hp/pavilion_m6_1035dx: Move GEVENT/GPE definitions to common fileAlexandru Gagniuc
These definitions were scattered in a couple of files, and we risk scattering them all over the place. Provide a common file for these definitions. Change-Id: I1fe99e5097cf10a349661f3b2ae2377f5cdd6103 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5547 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20Move MAX_PHYSICAL_CPUS to AMD k8 and fam10Kyösti Mälkki
This was always AMD-only and it was never properly used with AGESA. Change-Id: Ifb461ee845e442f6cf90aca52470cfb66e862bfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5540 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb700: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
Following boards use cimx/sb700: amd/dinar supermicro/h8qgi supermicro/h8scm tyan/s8226 Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0. There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1). Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0. Together with documented 4-bit restriction for APIC ID field, this APIC ID programming matches with MP tables and ACPI tables. I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which we do not have in the tree. Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5539 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD AGESA cimx/sb800: Drop APIC_ID_OFFSET and MAX_PHYSICAL_CPUSKyösti Mälkki
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1. Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5538 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-20amd/torpedo: Remove unused Kconfig optionsKyösti Mälkki
These are not used with cimx/sb900 vendorcode. Change-Id: I489ee80c739b31edac649491497162c65316996e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5537 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20AMD cimx sb700/sb800/sb900: Fix NODE_PCI and use of MAX_PHYSICAL_CPUSKyösti Mälkki
Match the definition of NODE_PCI() with get_node_pci(), so romstage and ramstage agree of the PCI BDFs for nodes. Note that all board have CONFIG_CDB = 0x18 and the maximum for nodes = 8, so we always have (CONFIG_CDB + x) < 32. Change-Id: I676ee53a65ef5b1243df2c5889577dd987c8fc9c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5536 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-20mainboard: New port Packard Bell LM85.Vladimir Serbinenko
Change-Id: I8c1548470c605d06825fe35579879e806bf33542 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5271 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-20drivers/elog: Fix implicit function declaration issueEdward O'Callaghan
Fix compilation. Relying on the pre-processor to condition an if statement will lead to warnings of implicitly defined functions. To solve this dilemma add symbols to resolve to at compile time. Change-Id: Id0117528c5579cc1dec750a8a17a76fab4314b3f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5504 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-19rmodule: add subsections to linker scriptAaron Durbin
Depending on the compiler options, subsections of the form of .section.subsection could be generated. Therefore, include those subsections for .bss, .sbss, and .data. Change-Id: I80dd64d8c62e7bc449ee2bbc0a22a941777e2ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5407 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Implement MB.LIDS ACPI methodAlexandru Gagniuc
Change-Id: I654ca745f7404b86aa25fb2e696751d616d0ca03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5517 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Implement ACPI for wireless toggle hotkeyAlexandru Gagniuc
Change-Id: I2e9ab68263648af8c9d46999e960f0a0711b61d7 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5516 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-19ec/compal/ene932: Update to use coreboot EC-mainboard APIAlexandru Gagniuc
This patch implements a simple interface between the EC and mainboard ASL code. This interface does not rely on the preprocessor, and prevents name conflicts by scoping the interface methods. As this interface is documented on the coreboot wiki, an in-tree documentation is not provided. Change-Id: If0b09be4f5e17cc444539a30f0186590fa0b72b5 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5515 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-19hp/pavilion_m6_1035dx: Rename "LID0" ACPI object to "LID"Alexandru Gagniuc
There is only one lid switch, so it does not make sense to number it. This naming is also consistent with the examples in the ACPI spec. Change-Id: Ida0a4a89ca03b2aad4fc77e52996e86332d370cd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5545 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown when lid is closed on non-ACPI OSAlexandru Gagniuc
This is handled by generating an SMI when GEVENT22 goes low. This pin is driven by the EC when the lid opens or closes. This SMI is disabled when switching to ACPI mode, so ACPI OSes are not affected. Change-Id: I38193572bf0416fd642002dba94c19257f0f6f5b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/171 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18southbridge/hudson: Compile refactored SMI setup utilities in SMMAlexandru Gagniuc
Refactor hudson_enable_gevent_smi() to allow configuring the interrupt mode and trigger level. Move the utilities which are useful in SMM to a separate file that is included in both ramstage and SMM. This is useful for SMI handlers which need to enable or disable GEVENT SMIs on-the-fly. A follow-up patch makes use of this infrastructure. Change-Id: Ifa4c300c00c178b18d7280690cfc4b8367c669b8 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/170 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18util/cbfstool: Fix "Bad segment type 53534220 Could not load payload".Wei Hu
The magic number mismatch was introduced by commit a8a133 (Add section header parsing and use it in the mk-payload step). Change-Id: I73b0adb969816e9d130f19f48e175c57124e2f3a Signed-off-by: Wei Hu <wei@aristanetworks.com> Reviewed-on: http://review.coreboot.org/5528 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-18hp/pavilion_m6_1035dx: Shutdown on low battery with non-ACPI OSAlexandru Gagniuc
Intercept the low battery SMI from the EC, and shut down the system immediately. The EC only sends this SMI when the OS did not enable ACPI mode, so ACPI OSes are not affected by this. On the other hand, payloads such as GRUB or SeaBIOS will experience the shutdown. This behavior is helpful for protecting the battery, for example, when the OS fails to boot and we are stuck in the payload. The low battery SMI is triggered at 10% charge, at which point the risk of cell degradation exists. Change-Id: I4c6c1a4feed8576cbdbb1945768de0805a1f5e42 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-18console: Simplify the enable rulesKyösti Mälkki
Consoles on CBMEM and USB have somewhat complex rules and dependencies when they can be active. Use simple variables to test which stage of boot is being built for each console. Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18build rules: Identify build stage with simple variablesKyösti Mälkki
Provide simple environment variables telling which stage of boot is being built. Also move this to arch-agnostic location. Change-Id: I8cbb5cf91f53e01c06e7d672b5be3f5c235f911d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5410 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-04-18console: Split ROMCC helpersKyösti Mälkki
These are potentially useful with GDB or SerialICE too. Also it reduces the amount of actual code we put in romcc_console. Change-Id: Id8c56e979660ad9f4eef39c648f68c7ec60edfba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5339 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Drop driver list in ramstageKyösti Mälkki
This framework was only available in ramstage. So we had to define console output functions separately for bootblock, romstage and SMM. Follow-up patches will re-enable all the consoles removed here, in a more flexible fashion, and with less lines-of-code and copy-paste. Also the driver list is not in a well-defined order and some of the loops could exit without visiting all drivers. NOTE: This build has no console in ramstage. Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5337 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18msi/ms9652_fam10: minor Kconfig cleanupPatrick Georgi
SMP and IOAPIC shouldn't need to be redefined here, select is enough Change-Id: I8a66374205b671498ce21b3f174af14e98dbfe48 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5541 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-18southbridge/sb800: Strip obsolete commentaryEdward O'Callaghan
Change-Id: I5cd9e1fcf197eae966be710b2ab24f49c6885eb0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5529 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17AMD hudson yangtze: Drop MAX_PHYSICAL_CPUS in commentsKyösti Mälkki
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-17southbridge/hudson: Remove unused function set_sm_enable_bits()Alexandru Gagniuc
This function isn't used on hudson, and seems to be copy-paste from older southbridges. It is used in sb700 to enable or disable certain PCI devices. On hudson, these configuration bits are moved to the PM space. Change-Id: I9b967a2d0a5dddc8341204dadeed90460251915c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5513 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17hp/pavilion_m6_1035dx: Remove code which dumps ACPI tablesAlexandru Gagniuc
Dumping ACPI tables in canonical form has very little value, and is of questionable use except when debugging acpigen. Remove the code which dumps the tables. Change-Id: Id13c88cee8674b13e5cf5b5ed32c26283e586fd9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5526 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17hp/pavilion_m6_1035dx: Add SMI handler and handle EC requestsAlexandru Gagniuc
The EC may disable some functionality, such as Caps Lock LED and battery charging if it never receives a command to go in APM mode. If we start it in APM mode, then immediately switch to ACPI mode, it will not get its SCIs serviced until an ACPI OS boots. If its SCIs are not serviced, it may assume the OS has hung. The way we solve this is to initalize the EC in APM mode, and only switch it to ACPI when an ACPI-capable OS issues the ACPI_ENABLE command. The switch has to be handled in SMM. Although we aren't yet processing SMIs from the EC, we are reading the status in order to satisfy the EC that the event is handled. Change-Id: Iffaeb9a6f57841f456c4bce8337dc09b287f8758 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5512 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17roda/rk9: Drop MAX_PHYSICAL_CPUSKyösti Mälkki
Change-Id: I9c41cccf9058c48006b247aca705a3f869ae82a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-17southbridge/hudson: Add support for ACPI enable/disable via SMIAlexandru Gagniuc
This enables the ACPI SMI command port in the FADT table, and sets up the hardware accordingly. If we have SMI enabled, then we don't set the SCI_EN bit at boot, causing the OS to send the ACPI_ENABLE command, as required by the ACPI spec. This gives us a chance to hook into the mainboard_smi_apmc() handler. Change-Id: Ib4c63d55b3132578dcae48bfe2092d4ea35821dd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5511 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17southbridge/hudson: Pass GEVENT SMIs to mainboard_smi_gpi()Alexandru Gagniuc
Change-Id: Ifc368974a7a0dc0756431654fb89668e3846801a Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5502 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-17southbridge/amd/agesa/hudson: Add initial support for SMMAlexandru Gagniuc
This sets up the infrastructure to handle SMIs generated by the Hudson southbridge. An API for interfacing to mainboard handlers is not defined at this point. A few functions are defined to allow mainboard code to enable SMIs from GEVENT pins. These are the only functions which I expect to be needed anytime in the foreseeable future. SMIs are always acknowledged and cleared, as not clearing an SMI will cause us to re-enter the SMI, effectively bricking the machine if a southbridge-generated SMI without a handler occurs. Change-Id: Ibceb21ac5423eb134d3eb7d24800280b183f7619 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5494 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins)
2014-04-16cpu/amd/agesa/family15tn: Add udelay implementation for SMMAlexandru Gagniuc
This is a small implementation which uses only MSRs and rdtsc, without relying on northbridge or other system hardware. It's SMM safe in that it only reads registers, and doesn't modify the state of the hardware. Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5501 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-16cpu/amd/agesa/family15tn: Add initial support for SMM modeAlexandru Gagniuc
This is the minimal setup needed to be able to execute SMI handlers. Only support for ASEG handlers is added, which should be sufficient for Trinity (up to 4 cores). There are a few hacks which need to be introduced in generic code in order to make this work properly, but these hacks are self-contained. They are a not a result of any special needs of this CPU, but rather from a poorly designed infrastructure. Comments are added to explain how such code could be refactored in the future. Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5493 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-16southbridge/hudson: Use MMIO instead of PIO to access PM spaceAlexandru Gagniuc
The MMIO region is set up by AGESA very early on, so we can use it to access the PM register space in ramstage. 16-bit accessors are also provided to simplify some setup tasks. 16-bit accesses are not possible via PIO. The pm2_iowrite/read accessors are removed, as they are not used. Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5503 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-16AMD AGESA fam15tn/fam16kb: Remove unused source filesKyösti Mälkki
Change-Id: I45084ffe84fef4dd43acea843d7c93a81c255472 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5523 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD hudson yantgze: Drop MAX_PHYSICAL_CPUSKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5522 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD hudson yantgze: Drop APIC_ID_OFFSETKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5521 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-16AMD AGESA: Drop SB_HT_CHAIN_UNITID_OFFSET_ONLYKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5520 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-04-16AMD AGESA: Drop LIFT_BSP_APIC_IDKyösti Mälkki
Not used with AGESA vendorcode. Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5519 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-04-16AMD AGESA: Drop AMDMCTKyösti Mälkki
This config option is fam10 only. Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5518 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 04:52:38 +0000