summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-07mainboard/ocp/tiogapass: Add xeon_sp pch.aslMarc Jones
Use the xeon_sp pch.asl to include the intel common lpc.asl. Change-Id: I22ee9d325888808a9c775ecee0591b661e2bba4e Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-07mainboard/ocp/deltalake: Use xeon_sp pch.aslMarc Jones
Use the xeon_sp pch.asl to pickup the common block lpc.asl. This allows deltalake to pick up any general pch asl updates. Currently, generates the same asl. Change-Id: I5005032b030d288fdf5ca2f99d21fe8e6c752037 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47304 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07mainboard/ocp/tiogapass: Set longer BMC timeoutMarc Jones
The BMC isn't always ready in 60 seconds if it printing debug output. Give it 90 seconds to finish before timing out in coreboot. Change-Id: I3932d3e8fad067e8971e82b45b499801fc78079f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Javier Galindo <javiergalindo@sysproconsulting.com>
2020-11-07sb/intel/lynxpoint/pcie.c: Ensure OBFF is disabledAngel Pons
Setting registers 64h[19:18] = 2 and 68h[14:13] = 3 enables OBFF, and setting registers 64h[19:18] = 0 and 68h[14:13] = 0 disables OBFF. Register at offset 0x64 is DCAP2, and offset 0x68 is DCTL2. However, current code doesn't account for this. The result is that register 64h[19:18] = 2 and 68h[14:13] = 0, which means the hardware is OBFF-capable but support is disabled, which makes no sense. Given that reference code and Broadwell both disable OBFF, disable it here too. Change-Id: I6c1cafdb435ee22909b077128b3ae5bde5543039 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel/lynxpoint/lpc.c: Relocate `enable_hpet` functionAngel Pons
Change-Id: I957556bcb3f2d793ed2d9a9c966b2081f9be090c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47042 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07sb/intel/lynxpoint/lpc.c: Correct GPI routing checkAngel Pons
Code does not match comment, but this time the comment is right. Change-Id: I4e277a802c68c8a4e858b2e33e7ec69b41dd9773 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47044 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07sb/intel/lynxpoint: Correct SATA DTLE IOBP registersAngel Pons
Testing shows that these registers are backwards. Use the definitions from Broadwell instead. All affected boards use the same value for both. Change-Id: Ie47c9fddc2e9e15ce4c64821ea3a69356ac31b1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel: Don't set ACPI_EN twiceAngel Pons
It is already done once when enabling PMBASE in early init. Change-Id: I14289c9164ee1488c192fce721d86c89fa5cc736 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07sb/intel/*/lpc.c: Don't try to write read-only PCICMD bitsAngel Pons
For all these southbridges, the lower nibble of PCICMD is read-only. Tested on Asrock B85M Pro4 (Lynxpoint-H), LPC's PCICMD does not change. Change-Id: Ib3b16b1b9651f7f3bd06ff8bc27dafd8a323e93c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-07mb/intel/adlrvp: Configure GPIOs to enable DMICSridhar Siricilla
The patch configures GPIO pins to enable DMIC. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2907737071f7d6b3c88c492d90edf8455d1fa50a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-07mb/intel: Enable ALC711 Audio codec over SNDW0 linkSridhar Siricilla
The patch enables ALC711 Audio codec. Test=Verified on ADL RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-07mb/intel/adlrvp: Enable TCSS xDCI, TBT PCIe RP and DMA controllersV Sowmya
This patch enables TCSS xDCI, TBT PCIe root ports and DMA controllers for ADLRVP. BUG=b:170607415 TEST=Built and booted on ADLRVP. Change-Id: Iabd6cc7c589d1c20cde9d66c0a63e2cf16316b33 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47288 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-07mb/intel/adlrvp: Configure the HPD GPIO'sV Sowmya
This patch configures the HPD1 and HPD2 GPIO's. BUG=b:170607415 TEST=Built and booted adlrvp. Verified the hotplug functionality is working. Change-Id: Ied2d4c56220212a15103e9a2fbd01ce6f0811a74 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-07vc/intel/FSP2_0/CPX-SP: update to ww45 release and add watermark optionJonathan Zhang
Intel CPX-SP FSP ww45 release annotates default values for FSP-M UPD variables. FSPM MemRefreshWatermark option support is present in FB's CPX-SP FSP binary, but not in Intel's CPX-SP FSP binary. In FB's CPX-SP FSP binary, this option takes the space of UnusedUpdSpace0[0]. For DeltaLake mainboard, if corresponding VPD variable is set, use it to control the behavior. Such control is effective when FB's CPX-SP FSP binary is used. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I57ad01f33b92bf61a6a2725dd1cdbbc99c02405d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-06sc7180: Correct mmu configuration for AOP SRAM regionsT Michael Turney
NOC errors detected at runtime in AOP SRAM region strongly suggested speculative memory accesses were occurring in memory regions that either don't exist or are device memory rather than SRAM. Signed-off-by: T Michael Turney <mturney@codeaurora.org> Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-06soc/amd/picasso: add Raven1 GPU PCI IDFelix Held
Change-Id: Id4460eb596b080dec1a63a20869182170c3388af Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso/cpu: add Raven1 CPUID to CPU tableFelix Held
The RV1 CPUID is already in the cpu.h file, but was still missing from the CPU table in cpu.c. Change-Id: Iad78cbe933b40e946d421e4c93e523f9e31f1089 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06zork/var/ezkinil: Adjust USB2 phy si fine tune on DVT BoardLucas Chen
Adjust USB2 phy si setting fine tune on DVT for Ezkinil. BRANCH=zork BUG=b:156315391 TEST=Measuring scope timing and test usb detection Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Id537b6e9a17f47481b6aedcea0c6a8474d993b6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-11-06mb/purism/librem_mini: Set unused GPIO pads to PAD_NCMatt DeVillier
Set numerous pads to PAD_NC as per board schematics (they are either NC, or connected to test pads), and adjust comments as needed. Change-Id: I4c2ab936256d0031d7a127fbeac42c8951a0b39f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-06soc/amd/picasso: Set vboot hashing block size to 36kMartin Roth
On picasso's psp_verstage, the vboot hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 150ms of boot and S3 resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6642073357327811b415dcbcad6930ac6d2598f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/amd/picasso: Up stack size to 40k for vboot hash bufferMartin Roth
Increasing the vboot hash buffer size greatly speeds up the SHA calculations. Going from a standard 4k buffer to a 36k buffer takes ~150ms of the boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibca868ad7be639c2a0ca1c4ba6d71123d8b83c92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46902 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
Update gpio and devicetree for elemi. BUG=b:170604353 TEST=emerge-volteer coreboot and boot into kernel Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I5b8880d485ed73aa4e65c1249c58f02c8f0c6501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-06mb/google/variant/elemi: config CSE LITEWisley Chen
Config elemi to use CSE LITE BUG=b:170604353 TEST=emerge-volteer coreboot Change-Id: I31c7a743645d6a34ee34e750ba92c108b306ee09 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47019 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/google/variant/elemi: Select USE_CAR_NEM_ENHANCED_V2 for elemiWisley Chen
BUG=b:170604353 TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I1a1ab6f3d57d5023523b85bfb00d48d8b70a6c1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-06security/vboot: Add Kconfig symbol to set hashing block sizeMartin Roth
Generally, this size probably doesn't matter very much, but in the case of picasso's psp_verstage, the hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 140ms of boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I68eecbbdfadcbf14288dc6e849397724fb66e0b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-11-06soc/intel/xeon_sp/skx: Fix MADT CPU indexesMarc Jones
The CPU index wasn't getting updated. Confirm MADT sets IOAPIC and CPU ID numbers. Change-Id: I72430cc48f4609ac408e723172ba1ed263cca8e3 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-06soc/intel/xeon_sp: Move CPU helper functionsMarc Jones
Continue Xeon-SP de-duplication. Move CPU helper functions from skx/ and cpx soc_util.c to common util.c. Functions only used by util.c are updated to be static. The following functions are moved: int get_threads_per_package(void); int get_platform_thread_count(void); const IIO_UDS *get_iio_uds(void); unsigned int soc_get_num_cpus(void); void get_core_thread_bits(uint32_t *core_bits, uint32_t *thread_bits); void get_cpu_info_from_apicid(uint32_t apicid, uint32_t core_bits, uint32_t thread_bits, uint8_t *package, uint8_t *core, uint8_t *thread); void xeonsp_init_cpu_config(void); Change-Id: I118a451b9468459cf2c2194f31da1055e1435ebe Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47170 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/intel/xeon_sp/cpx: Reorder cpu.c .h includesMarc Jones
Clean up the header includes. Change-Id: I9f61d1a82b37bc0ed803967dc64decf18f44adc9 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-11-06amdfwtool: Use shell command to get depend file listZheng Bao
The amdfwtool is not available at the beginning of the building. So it may have error if it is missing. Change-Id: Id4db70986755cef8e98877c4e92841b25ced5452 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-06mb/google/octopus/variants/garg: Add new LTE SKUKevin Chiu
Add new SKU definition: Garg360 (LTE DB,1A2C,TS, no stylus, rear camera) SKU ID - 39 BUG=b:170708728 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ifec4e1360bd1aff3825bc6413b0a2ccd8b822075 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47015 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05soc/intel/tigerlake: Disable C1 C-state DemotionRavi Sarawadi
Disable C1 C-state auto demotion to decrease SoC power usage. When set, processor will conditionally demote C3/C6/C7 requests to C1 based on uncore auto-demote information. BUG=b:161215906 TEST=Measure and confirm SoC power usage reduction for key use cases eg 'Google Meets video call' Measured on instrumented boards for Volteer EVT and Delbin. Below measurements for Volteer: Google meets with 720p w/ auto-demotion w/o auto-demotion System Power 13.14W 9.4W SOC Power 7.9W 5.4W Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Shweta Malik <shweta.malik@intel.com> Change-Id: I649cafbaf03917d76521aa5f76ec58d218e1a1b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-05soc/amd/picasso: move MAX_CPUS setting from mainboard to SoC KconfigFelix Held
Since the mainboard Kconfig is sourced before the SoC one, it would still be possible to override this setting at mainboard level, even though that shouldn't be needed. The maximum CPU count for Picasso is 8, since the chips have only up to 4 cores with up to two threads each. Change-Id: I53449b8fa73c5d13e6ea77bee6eed8896b7d3ec3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47205 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05ec/google/chromeec: Remove the check for Internal TypeC MUXKarthikeyan Ramasubramanian
Integrated TypeC MUX is used only in certain SoCs and hence the missing devicetree configuration is not an error. Remove the check for internal TypeC MUX device and the associated debug statement. BUG=b:172186858 TEST=Build and boot to OS in Drawlat. Change-Id: Ieb76e1ccfd04f1628617b2665b05be6718a25f81 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-05mb/msi/ms7707/Kconfig: Drop invalid defaultsAngel Pons
The PCI ID corresponds to the iGPU, which is disabled in the devicetree. Also, the VBIOS file does not exist at the specified location. Change-Id: I4f128d3057dc7218f32320c4e23466eb31af4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45672 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05mb/purism/librem_mini: Drop DW0/DW1 from GPIO config commentsMatt DeVillier
These are generated by inteltool + intelp2m and reflect the pad configuration of the vendor (AMI) firmware at a specific point in time, but do not always reflect the correct configuration of a given pad as per the schematics, so drop them. Change-Id: Ie337cca5bc0e87a5426cceae8d7ec29ab14a1729 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47200 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05mb/intel/adlrvp: Add support for DDR5 memorySubrata Banik
This patch adds DDR5 memory configuration parameters to FSP. TEST=Able to build and boot ADLRVP with DDR5 memory. Change-Id: I4711d66c7b4b7b09e15a4d06e28c876ec35bc192 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46485 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05soc/intel/xeon_sp: Use common cpu/intel romstage entryArthur Heymans
This removes some boilerplate like starting the console and also adds a "start of romstage" timestamp. Change-Id: Ie85df5d244fa37c41f0b3177ca325c607fa54593 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04haswell: Add Intel TXT support in romstageAngel Pons
Provide necessary romstage hooks to allow unblocking the memory with SCLEAN. Note that this is slow, and took four minutes with 4 GiB of RAM. Tested on Asrock B85M Pro4 with tboot. When Linux has tboot support compiled in, booting as well as S3 suspend and resume are functional. However, SINIT will TXT reset when the iGPU is enabled, and using a dGPU will result in DMAR-related problems as soon as the IOMMU is enabled. However, SCLEAN seems to hang sometimes. This may be because the AP initialization that reference code does before SCLEAN is missing, but the ACM is still able to unblock the memory. Considering that SCLEAN is critical to recover an otherwise-bricked platform but is hardly ever necessary, prefer having a partially-working solution over none at all. Change-Id: I60beb7d79a30f460bbd5d94e4cba0244318c124e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-04mb/purism/librem_cnl: Set SaGv to FixedHighAngel Pons
Since the Librem Mini does not run on battery power, SaGv has little benefits and noticeably slows down testing, since memory training is run twice. Disabling SaGv cuts the 30-second cold boot time in half. Change-Id: Ib02e42dcb4f20fdbdca85456c0dceafc59c782d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-11-04sec/intel/txt: Add support for running SCLEAN in romstageAngel Pons
SCLEAN has specific requirements and needs to run in early romstage, since the DRAM would be locked when SCLEAN needs to be executed. Change-Id: I77b237342e0c98eda974f87944f1948d197714db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-04sb/intel/lynxpoint/acpi/gpio.asl: Simplify constantsAngel Pons
Only LPT-LP includes this file, so `ISLP` is effectively constant. Thus, eliminate some unnecessary if-blocks, since only one branch gets taken. Change-Id: Ie8ba787bf5c021845e1e47256a6303697aa97fe1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46776 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint: Align LP GPIO ACPI with BroadwellAngel Pons
Move the `GWAK` method into the GPIO device, and have lpc.c include the LP GPIO code. All usages of `GWAK` on mainboards need to be updated. Change-Id: Id6a41f553d133f960de8b232205ed43b832a83d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46775 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint/acpi: Put together LP GPIO codeAngel Pons
Rename `lpt_lp.asl` and place all Lynxpoint-LP GPIO ASL there. It has been named `gpio.asl` to ease diffs between Lynxpoint and Broadwell. Tested with BUILD_TIMELESS=1, Google Panther does not change. Change-Id: I7cc4ab3371014be783761f110542471a8c0157a3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46774 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Merge `device_nvs.asl` into `globalnvs.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: If5f1feb0cd43fe1e0514b4e3fa766da60e2b7603 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46773 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Include EC and IRQ links ACPI earlyAngel Pons
Other southbridges such as Lynx Point do it. This eases merging later. Change-Id: I10196bbc44ce859c2747755845378351f45944ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46766 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/*/acpi/lpc.asl: Drop unnecessary RCBA offsetAngel Pons
Nothing should be using this offset. Change-Id: Ia4736471e2ac53bec18bfe073f4aa49e3fc524a8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46765 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/lynxpoint: Expose full LPC device ID in ACPIAngel Pons
This is merely to align ACPI files with Broadwell. It is unused. Change-Id: I8aa297bd3c3734bbd438ff84742aadfc661adcf7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46764 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch: Use common PCIe ACPI codeAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I1f41ce943e25dceab79c7d7ee2ed797c392dcd52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46763 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi: Add PCIe register offsetsAngel Pons
These are present in common southbridge ACPI code, and also exist on Broadwell. Thus, add the definitions to align with common ACPI code. Change-Id: Ib0ad9da80920fe7c70986e541c50f6adccb49d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46761 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/gma.c: Align struct with HaswellAngel Pons
Change-Id: Ifd1fb02497e1d326b6b9c5752f471f52b145a8ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-04sb/intel/common/acpi/pcie.asl: Generalise file commentAngel Pons
This file is no longer specific to 6 and 7 series PCHs. Change-Id: Ib89378bd6ba1d80281b92a79d37b9fdeaaed40fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46762 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04sb/intel/common/acpi/irqlinks.asl: Clean up cosmeticsAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I8562fc3278144380b0ab842d88176114821be823 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46760 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Use common irqlinks.aslAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9179c1b449925cc66628fc3266652b8237ab49e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46759 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi/irqlinks.asl: Add missing IRQsAngel Pons
Commit 2e1f764 (sb/intel/common/acpi/irqlinks.asl: Add missing IRQs) added these IRQs for Lynx Point and earlier southbridges. Follow suit for Broadwell, since it also supports them. Vendor firmware of the Asus X555LAB laptop also contains these IRQs, as per the disassembled DSDT. Change-Id: If857352dd25ba61c1f09c1ff4358efafdc3a5c73 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46758 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Align ACPI with Haswell/LynxpointAngel Pons
Drop unnecessary smbus.asl in favor of southbridge common code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I13b35d2155a2cede0a56846b8bf8a79d4ebfc7b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46757 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04nb/intel/haswell: Place CTDP ASL code in a separate scopeAngel Pons
This is just to align the code with what Broadwell does. Change-Id: I52fb1546d049ca9fa09d0c54304ca1d79f6c4c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46756 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04nb/intel/haswell/acpi: Align with BroadwellAngel Pons
Align cosmetics and move CTDP-specific ASL into its own file. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I476a4e01016caa3658177b0fa8916576f4a5e0e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46755 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Drop community comments in GPIO configMatt DeVillier
These add nothing useful to the GPIO config Change-Id: Ieecc9bd67d020e141c3a1f1d387034df5e563068 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47190 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Update GPIO configMatt DeVillier
Update GPIO config using a fresh dump of inteltool from the vendor (AMI) firmware on a Librem Mini v2, run through intelp2m with parameters '-p cnl -n -ii' Change-Id: I747415fb9ab7b21943d256d248729cb9e2b4b945 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47206 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04util/intelp2m: Update macrosBenjamin Doron
Change-Id: Ia0a7dea89fdb69e01f0abe577488f26a5d2bd6ed Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/purism_librem_mini: Add child device, slot descriptions to PCIe RPsMatt DeVillier
Change-Id: Id306100fc691dcbde48b65092d0be9d7e73c0722 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47189 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Reorganize devicetreeMatt DeVillier
Move registers under devices to which they belong. Change-Id: I61ca7c1db02646252d7421f8b79dfc8a40b2bdb5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47188 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: drop unused HeciEnabled registerMatt DeVillier
this should have been corrected as part of: commit 3de90d1 [soc/intel/cnl: Set Heci1Disable depending on devicetree config] Change-Id: I6a103a1de01fc258ef359258a8a64f4c5a181139 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47187 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/purism/librem_mini: Increase TDP/PL2 settingMatt DeVillier
PL2 was set artificially low during development when the active cooling fan was not functional, and never corrected once the fan was fixed. Raise PL2 to a value which works with both Librem Mini variants. Change-Id: Ie377392020f73359aed80ddae727adb6f8d06344 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: Drop devicetree settings which default to 0Matt DeVillier
All chip registers default to 0, no need to explicitly set them. Change-Id: I056121170d22393484b0ee79bd0815452161a900 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04mb/purism/librem_mini: drop SendVrMbxCmd from devicetreeMatt DeVillier
Not needed for this board. Change-Id: I15a68b59bc512e571b9590007ea64561b3f3dae1 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-04soc/amd/common/psp: move v1-only mailbox commands to separate sectionFelix Held
Two of the PSP mailbox commands are only applicable to the first generation of PSP mailbox interface. Change-Id: Ice940ee780c3d96ae1d9ec7ba49ea4add00e8723 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-04soc/intel/xeon_sp: Add a smm_region functionArthur Heymans
This reports where TSEG is located and will be used when setting up SMM. Change-Id: I9a89cc79b08e2dcf1ffb91aa27d92c387cc93bfd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04mb/samsung/lumpy: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: I7ad79a31142af8ae1b62497ade0b4ba7bac3a93c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46214 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/ocp/deltalake: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated build/dsdt.dsl files are same. Change-Id: I5bd8fe629fb969ec14dd400b6463ee1592d6903b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46207 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/ocp/tiogapass: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated build/dsdt.dsl files are identical. Change-Id: Iffd6954dcb3f9fb8bcd89854d84f6944cb520dd1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46208 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/samsung/stumpy: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are same. Change-Id: I0eda144f1a4f07ca82b3a799afcd8fc908419e69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46215 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04ec/purism/librem: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated build/dsdt.dsl are same for purism Librem 15 v4. Change-Id: I36cb7a2ebde1161f87e78eeab739b15e3cf88860 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04soc/intel/xeon_sp: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I43e36f2e736192603be61519d3e185605e81f0e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/roda/rk886ex: Convert *.asl to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: I2eea24db6cfd260e0f36243e90a5e01b360f23fb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/google/link: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'dsdt.dsl' files are identical. Change-Id: I7d4fc3acd82023b007d80638bcb71476330ef320 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/google/beltino: Convert to ASL 2.0 syntaxElyes HAOUAS
Built google/beltino (Monroe) provides identical 'dsdt.dsl'. Change-Id: I12b6a8264e53ece30ae79da2d79c6f1d302fb357 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/intel/baskingridge: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'dsdt.dsl' files are identical. Change-Id: I5897397bdadf86214ceaf90d8cd706e10969d8c1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/google/volteer/var/voema: Update dq/dqs mappingsDavid Wu
Update dq/dqs mappings based on voema schematics. BUG=b:169356808 BRANCH=volteer TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I1aae4286278e712bf29ebb15738477828d3f74d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04soc/amd: Change FIRMWARE_LOCATE to FIRMWARE_LOCATIONZheng Bao
Change-Id: I3a3d187fc24ab752dfe61893c15561a92d009fe2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04amdfwtool: Change all error output to fprintf stderrZheng Bao
Change-Id: Ie4ce0f1fb3aea8f12dfae9e5d16589262e7d6ab0 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45895 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04amdfwtool: Add an option to show debug messageZheng Bao
Change-Id: I3e3bcc2c9e1b3edfed1ce845c1603b2a9a2bb044 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-04mb/intel/emeraldlake2: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are identical. Change-Id: Idd2bf447975b4c9b2cd3b440505c0bd960374165 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/getac/p470/acpi: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: Ifed93f4b0c360ec74f28926fb7cc9774ae03b8a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04mb/getac/p470/acpi/ec.asl: Remove duplicated codeElyes HAOUAS
"If(And(RFDV, 0x02)) {Or(Local0, 0x02, Local0)}" is duplicated. Change-Id: I91698fb308cd37c65aa65e563bcd88743097f56c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45865 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04acpi/acpi.h: Update region spacesElyes HAOUAS
Update operation region spaces according to ACPI Release 6.3 Errata A. Change-Id: I05305c96a2170eaf651d71ac79b67653745108a2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04soc/intel/skl,acpi/acpigen: convert global CPPC package to local oneMichael Niewöhner
Move the global CPPC package \GCPC to the first logical core CP00 and adapt the reference in the other cores. This is cleaner and avoids confusion. Test: dumped SSDT on Supermicro X11SSM-F and verified decompiled version Change-Id: I40b9fd644622196da434128895eb6fb96fdf254d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04util/qemu: Add comprehensive default config for QEMU Q35Nico Huber
This config tries to mimic the actual devices of a mainboard with Intel's Q35 chipset. It provides a much better base to test coreboot (e.g. its allocator) and payloads. Change-Id: Id465016e37ee75628a55b9da68facb4ae0efe822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04util/qemu: Add `qemu` make targetNico Huber
Add some mechanics to automatically have a `qemu` make target for supported configurations. So with a QEMU target selected in Kconfig, one would ideally only have to run `make qemu` to test things. There are some notable variables that can be set or adapted in `Makefile.inc` files, the make command line or the environment. Primarily for `Makefile.inc` use: QEMU-y the QEMU executable QEMU_CFG-y a QEMU config that sets the available default devices, used to run more comprehensive tests by default, e.g. many more PCI devices For general use: QEMU_ARGS additional command line arguments (default: -serial stdio) QEMU_EXTRA_CFGS additional config files that can add devices QEMU_CFG_ARGS gathers config file related arguments, can be used to override a default config (QEMU_CFG-y) Examples: $ # Run coreboot's default config with additional command line args $ make qemu QEMU_ARGS="-cdrom site-local/grml64-small_2018.12.iso" $ # Force QEMU's built-in config $ make qemu QEMU_CFG_ARGS= Change-Id: I658f86e05df416ae09be6d432f9a80f7f71f9f75 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04soc/intel/xeon_sp: Pass IIO_RESOURCE_INSTANCE as pointerJacob Garber
IIO_RESOURCE_INSTANCE is a large struct, so it should be passed as a constant pointer rather than making a copy. Found-by: Coverity CID 1432759 Change-Id: Iebbb4d292f4d956e767bda28cbf20b0318586510 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46729 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04util/sconfig: Report which key is duplicatePatrick Georgi
It slightly helps debugging issues when you know what to look out for. Change-Id: I21eafaf8291701316aa920e458ba74535121b0a1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04mb/emulation/qemu-aarch64: Add a timestamp regionArthur Heymans
The romstage region is moved up a bit more to satisfy the MMU. Change-Id: I00c2b4972495fa669d4dc2a52f298a0e4d0cf5ff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04mb/google/volteer: clang-format mainboard.cJes Klinke
This CL is entirely generated by running the automatic formatter on this one file. BUG=None TEST=abuild -t GOOGLE_VOLTEER2 -c max -x Change-Id: Ibdd8cc2222e7af11c11df963b088ca2db07a3214 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04mb/prodrive/hermes: Set tcc offset to 1Patrick Rudolph
Prevent early throttling when the ambient temperature is high. Change-Id: Ie6881c9c0942aae3e43509170352271a74244d42 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04soc/intel/xeon_sp/cpx: Align coreboot CAR symbols to FSP-TArthur Heymans
The CAR set up by FSP-T is at base 0xfe800000 and has a 0x200000 size. FSP-M seems to have a very large stack usage so it would overflow other car symbols located below the coreboot stack such as timestamps and the pre-ram console, which are now fixed. TEST: boot with ocp/deltalake. Change-Id: I886f9391ad79fcfa0724109393e3781a08d954b4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46895 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03mb/google/volteer: Log EC events in case of S0ix resumeFurquan Shaikh
This change adds the callback `elog_gsmi_cb_mainboard_log_wake_source()` to volteer to enable logging of EC events in case of S0ix resume. BUG=b:172272078 BRANCH=volteer TEST=Verified that EC events are logged correctly for S0ix resume: 11 | 2020-11-02 14:11:05 | S0ix Enter 12 | 2020-11-02 14:11:08 | S0ix Exit 13 | 2020-11-02 14:11:08 | Wake Source | Power Button | 0 14 | 2020-11-02 14:11:08 | EC Event | Power Button 15 | 2020-11-02 14:11:17 | S0ix Enter 16 | 2020-11-02 14:11:21 | S0ix Exit 17 | 2020-11-02 14:11:21 | Wake Source | GPE # | 112 18 | 2020-11-02 14:11:21 | EC Event | Lid Open Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7aa9dc2470da3226925927f2a0cc39fdd426e3b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47142 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/{tgl,jsl}: Enable logging of wake sources for S0ixFurquan Shaikh
This change adds elog.c to smm-y for Tiger lake and Jasper Lake platforms to enable the logging of wake sources in eventlog for S0ix. BUG=b:172272078,b:169731044 BRANCH=volteer TEST=Verified on volteer that wake sources are correctly logged for S0ix: 8 | 2020-11-02 13:54:27 | S0ix Enter 9 | 2020-11-02 13:54:33 | S0ix Exit 10 | 2020-11-02 13:54:33 | Wake Source | RTC Alarm | 0 11 | 2020-11-02 13:54:49 | S0ix Enter 12 | 2020-11-02 13:54:54 | S0ix Exit 13 | 2020-11-02 13:54:54 | Wake Source | Power Button | 0 14 | 2020-11-02 13:55:04 | S0ix Enter 15 | 2020-11-02 13:55:10 | S0ix Exit 16 | 2020-11-02 13:55:10 | Wake Source | GPE # | 112 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1c40dfba6c82ca45a21d35c5a2725e4d30855d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47141 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03sb/intel/lynxpoint/sata.c: Don't enable Bus MasterAngel Pons
Bus Master is not required and reference code does not set it. Tested on Asrock B85M Pro4, still boots from SATA SSD with TianoCore. Change-Id: I7a84da5b712e6fa569ad9f412c440afeb6a8cc5d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-03soc/intel/broadwell: Relocate PCH ACPI filesAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I7f87085c70149d02c544e2d43e1bdb58c7502d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46754 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 23:34:52 +0000