summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-13mb/google/puff/var/dooly: Update devicetree for audio and display configurationTony Huang
1. Add speaker amplifier ALC1015 2. Enable dmic+ssp registers for speaker and camera DMIC 3. Correct I2C#2 to LVDS, I2C#3 to Touchscreen BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: I5f6f19b40c6fcce8dca9b010ae97ea6e3eeb1473 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46289 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb/google/puff/var/dooly: Update devicetree to remove unused devicesTony Huang
Remove unused device in Dooly no SD card reader no built-in LAN BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: I8ab1e156031bfb4d5ea30048d8a10400f2a49411 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-13mb/google/puff/var/dooly: Update devicetree for USB configurationTony Huang
Dooly has USBA*2 and USBC*2 BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: Icb66a8d5382ca9664e7f0b3660f446aeb3cf1dd3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46126 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb/google/puff/var/dooly: Update GPIO table for project changeTony Huang
Override unused device SD card reader, built-in LAN ALC1015 speaker amplifier SPK_AMP_ON Update touchscreen/lvds gpio pin BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: Ife14adf59609870abe9f4ba1eabe2573cb6e92dd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-13mb/intel/adlrvp/dsdt.asl: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I6f4d0bf9adc1cce4942a16675a072ffea00bd2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-10-13include/acpi/acpi.h: Introduce ACPI_DSDT_REV_2 macroElyes HAOUAS
This to replace DSDT revison number with macro so we can adapt all boards at once if needed. Change-Id: I9e92a5f408f69aa1a6801bc2cba8ddfe2180b040 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13mb/{51nb/x210,razer/blade_stealth_kbl}/dsdt.asl: decrease DSDT revision from ↵Elyes HAOUAS
0x5 to 0x2 DSDT revision 2 is used for ACPI v2 and greater. Change-Id: Ia019358be6574db1b2b06a8a7d52ae996cf45571 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb/intel/latest mainboards: Get rid of power button device in corebootSubrata Banik
Refer to commit d7b88dc (mb/google/x86-boards: Get rid of power button device in coreboot) This change gets rid of the generic hardware power button from all intel mainboards and relies completely on the fixed hardware power button. Change-Id: I8f9d73048041d42d809750fdb52092f40ab8f11f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12soc/intel: Configure PAVP at compile-timeBenjamin Doron
Expose configuration of Intel PAVP (Protected Audio-Video Path, a digital rights protection/management (DRM) technology for multimedia content) to Kconfig. Per the FSP default, this was always being enabled previously. Change-Id: I2aae741bb30e3be3c64324cd6334778bd271a903 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12util/superiotool: Add EC registers for IT8728FMatt DeVillier
Add support for dumping registers, default values for EC on ITE IT8128F. Taken from datasheet 'IT8728F V0.4.2' Test: 'superiotool -d -e' on board with IT8728F Super IO Change-Id: I7074b740565edf458d6894c066b61c083a657cb8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12soc/intel/cannonlake: Align cosmetics with Ice LakeAngel Pons
By ironing out cosmetic differences between Cannon Lake and Ice Lake, comparing actual code differences using a diff tool becomes simpler. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I4d9f882f9f8af1245e937b0d47bc7e993547365f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-10-12mb/clevo/l140cu: clean up memcfgMichael Niewöhner
The DQ and DQS byte maps do not apply to DDR4 configurations, thus simply drop them. Also drop ECT, as it's already initialized to zero and can't be used on DDR4 anyway. Further, trim down all the meaningless and/or wrong comments. Change-Id: I32f1b7bb46eaaf0f0ecad1df310f5de988f64c85 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46249 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/clevo/l140cu: drop disabled SPD indicesMichael Niewöhner
Drop the disabled SPD indices from memcfg, since they're already initialized to 0. Change-Id: I6d88bdac17222c2c5c35439517fe0bea46744b2b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-10-12mb/clevo/l140cu: drop USE_LEGACY_8254_TIMERMichael Niewöhner
Drop USE_LEGACY_8254_TIMER, since it's not required anymore for booting grub, despite the comment. The issue was resolved upstream five years ago: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=d43a5ee65143f384357fbfdcace4258e3537c214 Test: - Boot EFI GRUB2 from TianoCore payload (Debian Live, Ubuntu installer) - Boot GRUB2 payload Change-Id: I5ce4f5168586bf305969b2e24b6ee895c8552749 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45960 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/clevo/l140cu: set PS/2 timeout for SeaBIOSMichael Niewöhner
The keyboard only works randomly, because SeaBIOS initializes PS/2 before the EC is ready. Set the PS/2 timeout for SeaBIOS to 500 ms, to wait for the EC before initializing the keyboard. Test: keyboard works fine. Change-Id: I2be75961035f04a7ffa6f7e1dbaabb1243b857f9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45959 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/volteer/var/voxel: disable DdiPortHpdSheng-Liang Pan
GPP_A19 and GPP_A20 set no connection, disables DdiPort1Hpd and DdiPort2Hpd BUG=b:169690329 TEST=build and verify type-c(C0/C1) port functional normally Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I4405526ae777332d3c72041db7b4eda25ae31b8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46069 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/dedede: refactor DPTF section for simpler overridesSumeet R Pawnikar
Refactor DPTF section of code under the baseboard devicetree and overridetree. This makes override mechanism more simpler, because not all the DPTF fields need to be overridden. BUG=None BRANCH=None TEST=Built and tested on dedede system Change-Id: I8e7cfe60c010ed4c07f9089325b289519e861f84 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3373Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based on FSP version 3373. Previous version was 3333. Changes include below UPDs: ITbtPcieTunnelingForUsb4 SlowSlewRate FastPkgCRampDisable BUG=b:169759177 BRANCH=none TEST=build and boot delbin/tglrvp Cq-Depend:chrome-internal:3308203, chrome-internal:3308204 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I2e28905f8f7241940ea92ac3e83b52ff7948953a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45630 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12cpu/qemu-x86/cache_as_ram_bootblock: Fix wrong instructionPatrick Rudolph
The shld instruction does an arithmetic shift left on 64bit operants, but it's not the instruction we want, because what it actually does is shifting by cl, and storing the result in address 32. This wasn't noticed with QEMU as the DRAM is up and address 32 is valid. On real hardware when CAR is running this instruction causes a crash. Replace the instruction with the correct 64bit arithmetic left shift. Change-Id: Iedad9f4b693b1ea05898456eac2050a9389f6f19 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45820 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12nb/intel/i945/acpi: Convert i945.asl to ASL 2.0 syntaxElyes HAOUAS
It builds same binary for apple/macbook21 using BUILD_TIMELESS=1 Change-Id: I332afdcc4a1a7543571d8f9d121d8350347f7153 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45272 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12sb/intel/i82801gx/acpi: Convert *.asl to ASL 2.0 syntaxElyes HAOUAS
Also remove extra empty lines. It builds same binary for apple/macbook21 using BUILD_TIMELESS=1 Change-Id: Ibf349bb70b1fee31bfcdb4c87ffa5b4b8359e289 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45275 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/ibase/mb899/acpi: Convert platform.asl to ASL 2.0 syntaxElyes HAOUAS
It builds same binary for ibase/mb899 using BUILD_TIMELESS=1 Change-Id: I947c4228641abc38a5cd75e51fa2f096fda95d6f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45280 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/intel/d945gclf/acpi: Convert platform.asl to ASL 2.0 syntaxElyes HAOUAS
It builds same binary for intel/d945gclf using BUILD_TIMELESS=1 Change-Id: Ic48008719a9cf6942ae8cdaebaab6ba43e665489 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45281 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/getac/p470/acpi: Convert 'gpe.asl' to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I9f5a89946888be3ed033c2ee079f171a23404e90 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12mb/getac/p470/acpi/battery.asl: Remove unused remainderElyes HAOUAS
Change-Id: I6ddc3d0c50c5907e24644cea5979d064bea4acd1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12superio/smsc/sch5147/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I509b76dbdbdee8a6287fc7d877c9f6e3c6a9068b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12superio/smsc/sio1007/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I9cca957104620e8fd4717d9bb77efa5a2c93b446 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12superio/ite/it8772f/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I9a4d7ddd39800f07300d3b22b02924b696917f28 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12superio/smsc/mec1308/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I7d15dbb90bbf910cdfd59d67fa4d9ca41420b8d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12superio/fintek/f81803a/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Ia7072112a1add1de9c3fb348bc70dbd404337819 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45989 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/intel: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated buils/dsdt.dsl for intel/kblrvp11 are same. Change-Id: I41195be171b48f41fe2955e4639d8b770853d483 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-10-12superio/winbond/*/acpi: Convert superio.asl to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I67e08a1099e41acb7031469069d9eddb274f7735 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45994 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/facebook: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I91f65fecdcdf41dc41f136e8d66bbf730343aef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46078 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/pcengines/apu2: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Ie2b1b27c0715fc223e644c3df6c0e9cb876322c8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-10-12mb/pcengines/apu1: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' files are same. Change-Id: I15b332033f3d492f9e01bb5f1eb25892dee418de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-10-12mb/google/asurada: Add USB supportCK Hu
Change-Id: I35dc4be65f0843c3c74695c443dd958676e6c12c Signed-off-by: CK Hu <ck.hu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-12soc/mediatek/mt8192: Refactor USB code among similar SoCsZhanyong Wang
Adjust ssusb register layout and offset accroding mt8192 Soc then refactor USB code which will be reused among similar SoCs Signed-off-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com> Change-Id: Icb4cc304654b5fb7cf20b96ab83a22663bfeab63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-10-12soc/intel/jasperlake: Allow mainboard to override chip configurationKarthikeyan Ramasubramanian
Add a weak override function to allow mainboard to override chip configuration like GPIO PM. BUG=None TEST=Build and boot waddledee to OS. Ensure that the suspend/resume sequence works fine. Change-Id: I40fa655b0324dc444182b988f0089587e3877a47 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12security/intel/txt: Add and use DPR register layoutAngel Pons
This simplifies operations with this register's bitfields, and can also be used by TXT-enabled platforms on the register in PCI config space. Change-Id: I10a26bc8f4457158dd09e91d666fb29ad16a2087 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46050 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12security/intel/txt: Clean up includesAngel Pons
Sort them alphabetically, and use <types.h> everywhere. Drop unused <intelblocks/systemagent.h> header, too. Change-Id: Ib8f3339e5969cf8552984164fa7e08e070987a24 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-10-12mb/google/dedede: Enable SaGv supportAamir Bohra
Allow MRC training in SaGv low, mid and high frequencies. TEST=Verify memory trains at low, mid and high SaGv point through FSP debug logs enabled. Change-Id: I0f60aad031ce9dfe23e54426753311c35db46c05 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45196 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12soc/intel/jasperlake: Correct SaGv mappingAamir Bohra
Jasper Lake support 3 Memory train frequencies low. mid and high. Update the SaGv configuration accordingly. Change-Id: I366de1ea7cf41c56b2954b8032c69bfba81058e2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
2020-10-12security/intel/stm: Add options for STM buildEugene Myers
This patch adds options that support building the STM as a part of the coreboot build. The option defaults assume that these configuration options are set as follows: IED_REGION_SIZE = 0x400000 SMM_RESERVED_SIZE = 0x200000 SMM_TSEG_SIZE = 0x800000 Change-Id: I80ed7cbcb93468c5ff93d089d77742ce7b671a37 Signed-off-by: Eugene Myers <cedarhouse@comcast.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
Fix typo for power limit values under comment section in baseboard BUG=None BRANCH=None TEST=Build for volteer system Change-Id: I879b9587e863360bf4efda4099d96b42b904377e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12soc/intel/common/block/smm: Fix compilation without intel uart codePatrick Rudolph
Allow to link the smihandler when not selecting SOC_INTEL_COMMON_BLOCK_UART. Change-Id: Iabca81c958d00c48e0616579cbba61d254c5eb68 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-10-12mb/ocp/deltalake: Select correct uart for consolePatrick Rudolph
Tested on OCP deltalake. The console now shows up on the serial. Change-Id: If4c412c1ca749f1feba47b2ce0beb52d0111be86 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-10-12soc/intel/common/block/i2c: Scan bridge devices behind I2C controllersKarthikeyan Ramasubramanian
Currently devices behind I2C controllers are scanned using scan_smbus. This is done under the assumption that there are no bridge devices behind I2C controllers. In order to support I2C multiplexers which act as bridge devices and have devices behind them, scan the I2C controllers using scan_static_bus. BUG=b:169444894 TEST=Build and boot waddledee to OS. Ensure that all the bridge devices behind I2C controller are scanned and enabled. Change-Id: I9d8159a507683d8c56dd5e59d20c30ed7e4b2cab Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12mb/intel/tglrvp: Enable early EC syncAnil Kumar
- This change is required to execute EC sync in coreboot instead of depthcharge Bug=none Test=build and boot coreboot on TGLRVP Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I40ae104d4de93c12097e049253a33b23a46c6203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44689 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/intel/tglrvp: Add support of TPM over SPIShaunak Saha
Bug=none Test=emerge build and boot on tglrvp and check that tpm is probed successfully from coreboot. Cq-Depend:chromium-review:1881839 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I4a3aec98f72524e8e2a1834878ef75b9f933ae3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
2020-10-12util/intelp2m: Update output information format in the commentsMaxim Polyakov
Update the information format in the comments above the macros in the generated gpio.h file: PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD), /* LPSS_UART0_TXD */ -->(i) /* GPIO_39 - LPSS_UART0_TXD */ --> (ii) /* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii) /* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii) /* _PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), */ --> (iiii) PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD), Also, in the case of field macros: /* GPIO_39 - LPSS_UART0_TXD */ --> (ii) /* DW0: 0x44000400, DW1: 0x00003100 */ --> (ii) /* DW0 : PAD_TRIG(OFF) - IGNORED */ --> (iii) /* PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_39, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD), */ --> (iiii) PAD_CFG_STRUCT(GPIO_39, PAD_FUNC(NF1) | PAD_RESET(DEEP) | PAD_TRIG(OFF), PAD_PULL(UP_20K) | PAD_IOSTERM(DISPUPD)), By default, if do not use the -i... option, then additional information in comments will not be generated. TEST: git clone https://github.com/maxpoliak/inteltool-examples.git test ./intelp2m -n -file test/inteltool-asrock-h110m-stx.log ./intelp2m -fld cb -file test/inteltool-asrock-h110m-stx.log ./intelp2m -fld fsp -file test/inteltool-asrock-h110m-stx.log ./intelp2m -fld raw -file test/inteltool-asrock-h110m-stx.log Before and after (now with -i key) the patch, gpio.h is no different. Change-Id: I760f4aadece786ea455fb7569f42e06fefce2b61 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45168 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12arch/x86/smbios: Update SMBIOS type 0 ec versionTim Chu
Update embedded controller firmware version for SMBIOS type 0. TEST=Execute "dmidecode -t 0" to check if the ec version is correct Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Ibd5ee27a1b8fa4e5bc66e359d3b62e052e19e8a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12arch/x86/smbios: Update SMBIOS type 4 socket designationTim Chu
Add socket designation in type 4 smbios. TEST=Execute "dmidecode -t 4" to check if the socket designation is correct Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Icfdc201bd5b5921816bdce6c009a9db48c997e2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12mb/google/dedede: update devicetree for Botenalec.wang
Add trackpad, touchscreen, and usb port to devicetree BUG=b:160664447 BRANCH=NONE TEST=build bios and verify theirs function for boten Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: I057f7d15d20d1a78acd733cc5463357e9c87afb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-12intelmetool: Add PCI ID for Cometlake-UMatt DeVillier
Tested on out-of-tree CML-U Purism board Change-Id: I0371e913a75e47b8e6f5a3e4da47b1e401a72b5d Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45929 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNCNick Vaccaro
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC. Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated with H5ANAG6NCJR-XNC DDR4 memory parts. BUG=b:161772961 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Change-Id: Ia26315479ce1a749a0f7c9e81f134f7068d7eb0b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12util: Add DDR4 generic SPD for H5ANAG6NCJR-XNCNick Vaccaro
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC. BUG=b:161772961 TEST=none Change-Id: I71e4de9a28f78bbf8c7de1fcafa3596276a5f2f9 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-12soc/intel/jasperlake: Remove GPIO community 2 from DSDTEvan Green
The kernel driver enumerates communities 0, 1, 4, and 5, and assigns these addresses based on the BARs enumerated by coreboot. Coreboot was defining communities 0, 1, 2, 4, and 5. This meant the kernel was not controlling GPIOs in communities 4 and 5, since the resources were wrong. Remove community 2 for now. We can add it back if the kernel ends up needing it. BUG=b:169444894 TEST=Test controlling GPP_E5, verify actually toggles register. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I823e1aa942cfccadde01b9371d481457ab088c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46115 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot dirinboz, run integrity test, b:169940185 BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/dalboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1191d73a2a3f72f99de187a946162460acbb287a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45935 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/woomax: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I2fcbe35103020c3444902c077b4985f87f970671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45936 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on Vilboz with emmc BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I9a1e47dbee3fcc7317857d40c5418be30d755d61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/jecht: Disable PCIe AERMatt DeVillier
Ethernet hardware on jecht variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: Ieda82c6e13c2bbc4b3a051a3d2a7ae90728ccdc6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46137 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/beltino: Disable PCIe AERMatt DeVillier
Ethernet hardware on beltino variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: I0f592a21d08e79cda251e80cd1f1184c4311e9df Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46136 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12sb/intel/lynxpoint/pcie.c: fix typo in commentMatt DeVillier
Change-Id: I741b66e08d977f514f2512d626e3bcf22ce7d46c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-10-12sb/intel/lynxpoint: Set PCIe L1 substates capabilities registerMatt DeVillier
Copied from soc/intel/broadwell. Test: build/boot google/beltino variants, verify L1 PM substates listed under PCIe device capabilities Change-Id: Ib2ae3d9539de9f7e22975f00450d9d60d1fd938a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46134 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12sb/intel/lynxpoint: Enable/disable AER via KconfigMatt DeVillier
Several changes[1][2] to the Linux kernel now enable ASPM/AER for the rt8169 network driver, for which it was previously disabled. This, coupled with the southbridge enabling AER for all PCIe devices, has resulted in a large amount of AER timeout errors in the kernel log for boards which utilize the rt8169 for on-board Ethernet (e.g., google/beltino). While performance is not impacted, the errors do accumulate. To mitigate this, guard AER enablement via Kconfig, select it by default (as to maintain current default behavior), and allow boards which need to disable it to do so (implemented in subsequent commits). This implementation is derived from that in soc/intel/broadwell. Test: build/boot google/beltino variants with AER disabled (CB:46136), verify dmesg log free of AER timeout errors. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=671646c151d492c3846e6e6797e72ff757b5d65e [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a99790bf5c7f3d68d8b01e015d3212a98ee7bd57 Change-Id: Ia03ef0d111335892c65122954c1248191ded7cb8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46133 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/puff: Enable SATA0 on wyvernSam McNally
A SATA drive may be connected to SATA0. BUG=b:162909831 BRANCH=puff TEST=none Change-Id: I2a4ce2f89fa6d786358e01add15f2eedfbe4b20f Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-11mb/intel/adlrvp: Add ADL-P romstage mainboard codeSubrata Banik
List of changes: 1. Add DDR4 and LPDDR4 memory related code - SPD for LPDDR4 - DQ byte map - DQS CPU-DRAM map - Rcomp resistor - Rcomp target 2. Fill FSP-M related UPD parameters 3. Add devicetree.cb config parameters related to FSP-M UPD TEST=Able to build and boot ADL-P RVP till ramstage early Change-Id: Iffc5c17ed0725f61c8c274a80a1d27161ca6cebf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-11drivers/i2c/nct7802y: Configure remote diodes and local sensorMaxim Polyakov
The patch allows to configure sensors with a remote diode connected and a on-chip local temperature sensor from the devicetree for the board that uses this HWM. According to the documentation [1], this is done by setting the corresponding bits in the Mode Selection Register (22h). It is necessary for some Intel processors (Apollo Lake SoC) that do not support PECI and the CPU temperature is taken from the thermistor. TEST = After loading the nct7802 module on the Kontron mAL-10 [2] with Linux OS, we can see configuration of the HWM with one sensor in the thermistor mode: user@user-apl:~$ sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 0: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 1: +40.0°C (high = +110.0°C, crit = +110.0°C) Core 2: +41.0°C (high = +110.0°C, crit = +110.0°C) Core 3: +41.0°C (high = +110.0°C, crit = +110.0°C) nct7802-i2c-0-2e Adapter: SMBus CMI adapter cmi in0: +3.35 V (min = +0.00 V, max = +4.09 V) in1: +1.92 V in3: +1.21 V (min = +0.00 V, max = +2.05 V) in4: +1.68 V (min = +0.00 V, max = +2.05 V) fan1: 0 RPM (min = 0 RPM) fan2: 868 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) temp1: +42.5°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) sensor = thermistor temp4: +44.0°C (low = +0.0°C, high = +85.0°C) (crit = +100.0°C) temp6: +0.0°C [1] page 30, section 7.2.32, Nuvoton Hardware Monitoring IC NCT7802Y with PECI 3.0 interface, datasheet, revision 1.2, february 2012 [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: I28cc4e5cae76cf0bcdad26a50ee6cd43a201d31e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39766 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-11ec/kontron/kempld: Reflow long linesMaxim Polyakov
Change-Id: Ia5ad0715b742427dffa6c0c507269d904fe19bcb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-11ec/kontron/kempld: add option to configure I2C frequencyMaxim Polyakov
Allows to change the I2C bus frequency by overriding i2c_frequency option from the board devicetree. Thus, the I2C controller can use Fast-mode (Fm), with a bit rate up to 400 kbit/s and Fast-mode Plus (Fm+), with a bit rate up to 1 Mbit/s [1]. Tested on Kontron mAL10 COMe module with T10-TNI carrierboard [2]. [1] I2C-bus specification and user manual, doc #UM10204, Rev. 6, 4 April 2014. [2] https://review.coreboot.org/c/coreboot/+/39133 Change-Id: If0eb477af10d00eb4f17f9c01209f170b746ad3d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44476 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/wifi/generic: Log WiFi wake source to event logFurquan Shaikh
This change adds a call to `pci_dev_is_wake_source()` to determine and log WiFi wake source to event log just like the Intel WiFi driver does. This is done in preparation to merge the generic and Intel WiFi drivers in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I20528ae1f72ca633da31e01d777c46fd5f4a337f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11drivers/intel/wifi: Use newly added pci_dev_is_wake_sourceFurquan Shaikh
This change uses the newly added `pci_dev_is_wake_source()` helper function to determine and log WiFi wake source instead of assuming a hard-coded register value to check. This is done in preparation to merge the generic WiFi and Intel WiFi drivers in coreboot in follow-up changes. BUG=b:169802515 BRANCH=zork Change-Id: I9bdb453092b4ce7bdab2969f13e0c0aa8166dc0a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-11pci_device: Add a helper function for determining if PCI device is wake sourceFurquan Shaikh
This change adds a helper function `pci_dev_is_wake_source()` that checks PME_STATUS and PME_ENABLE bits in PM control and status register to determine if the given device is the source of wake. BUG=b:169802515 BRANCH=zork Change-Id: I06e9530b568543ab2f05a4f38dc5c3a527ff391e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-10nb/intel/ironlake: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I872269ca3c7fbbcffe83327a20bcf8d98b356beb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-10-10nb/intel/ironlake: Clean up DMIBAR/EPBAR registersAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Ironlake. Moreover, other register definitions were missing. Use the newly-added definitions in existing code, in place of numerical offsets. Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: I8ac99166a8029dcdbb59028b4a7ee297249de5db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants. Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09soc/intel/tigerlake: Add chipset devicetreeDuncan Laurie
Add aliases for devices and set most of them to off with the exception of some essential devices. Set a default register value as an example. Change-Id: If50269808645ddc019e0d94fa8296df58ab7c367 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44038 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09sconfig: Allow chipset to provide a base devicetreeDuncan Laurie
This change extends the devicetree override one more layer and allows the chipset to provide the base devicetree. This allows the chipset to assign alias names to devices as well as set default register values. This works for both the baseboard devicetree.cb as well as variant overridetree.cb. chipset.cb: device pci 15.0 alias i2c0 off end devicetree.cb: device ref i2c0 on end BUG=b:156957424 Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-09sc7180: Remove the delay to force hpd detection and always disable HPDVinod Polimera
HPD on this bridge chip is a bit useless. This is an eDP bridge so the HPD is an internal signal that's only there to signal that the panel is done powering up. But the bridge chip debounces this signal by between 100 ms and 400 ms (depending on process, voltage, and temperate). One particular panel asserted HPD 84 ms after it was powered on meaning that we saw HPD 284 ms after power on. Assume that the panel driver will have the hardcoded delay in its prepare and always disable HPD. Change-Id: Iea7dd75b57fa55ec182c0bee09b0f35208357892 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09soc/intel/xeon_sp: Use generic config_tMarc Jones
Don't use the silicon-specific struct type to get common config options. Instead, use the generic config_t typedef. This allows the function to be moved to common code in upcoming patches. Change-Id: If80b678037b4d79387e0a0f722c540df4aae2416 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46057 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
1. Apply the DPTF parameters received from the thermal team. BUG=b:169183507 TEST=build and verify by thermal tool Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I1a1a0f9e86e519ac15904fac80cf3c2299213e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-09soc/intel/xeon_sp: Set CPU_ADDR_BITS to 46 for SKX and CPXChristian Walter
According to document number 338846 and 336062 this should be set to 46 bits. Change-Id: I0bbe6c962ffc7d5dc722f1cacf55bc0d0615db59 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-10-09soc/intel/xeon_sp/cpx: skip DRHD generation for non-PCIe stackJonathan Zhang
Without skipping of DRHD generation for non-PCIe stack, the OS kernel detects incorrect DMAR table with following messages: [ 0.561817] Your BIOS is broken; DMAR reported at address 0 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I098605daf12a264f390613581427ec722afcddaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/45887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-09soc/mediatek: Add function to measure clock frequency of MT8192Weiyi Lu
Implement mt_fmeter_get_freq_khz() in MT8192 to measure frequency of some pre-defined clocks by frequency meter. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I75df0b040ed7ea73d25724a3c80040f4e731118f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45402 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09mb/google/dedede: Override GPIO PM configurationKarthikeyan Ramasubramanian
If Cr50 is running old firmware version and hence does not ensure long interrupt pulses, override the GPIO PM configuration. BUG=None TEST=Build and boot waddledee to OS. Ensure that any chip override happens before FSP silicon parameter initialization. Ensure that the suspend/resume sequence works fine. Ensure that the reboot sequence works fine for 50 iterations. Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-09mb/google/octopus: Disable Ambient Light Sensor (ALS)Karthikeyan Ramasubramanian
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices. BUG=b:169245831 BRANCH=octopus TEST=Ensure that ALS devices are disabled in ACPI tables. Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-09lib/spd: respect spd memory part name overrideNick Vaccaro
The BIOS log was looking in the spd data for the part name, but part names are stripped from generic SPDs. For these cases, a mainboard can override the dram part number string, so the spd logging code needs to check for an override string when logging the dram part number. Change print_spd_info() to use an override string if declared. BUG=b:168724473 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer2 and verify that the BIOS log shows a part name when logging SPD information: SPD: module part number is K4U6E3S4AA-MGCL I also modified volteer to not override the part name and verified that this change did as expected and printed a blank string. Change-Id: I91971e07c450492dbb0588abd1c3c692ee0d3bb0 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45459 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09mrc_cache: Change mrc_cache_load_current to return size of entryShelley Chen
Modify mrc_cache_load current to return the size of the mrc_cache entry so that caller will know what the actual size of the data returned is. This is needed for ARM devices like trogdor, which need to know the size of the training data when populating the QcLib interface table. BUG=b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a Change-Id: Ia314717ad2a7d5232b37a19951c1aecd7f843c27 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Berknip w/ eMMC to OS. BRANCH=zork Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
Current Ram_Id: 0011 MT40A1G16KNR-075-E never be built before. Remove it and change use micron-MT40A1G16KD-062E-E for ram_id:0011. BRANCH=zork BUG=b:159316110 TEST=run gen_part_id then check the generated files. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I28fc39f17e06ecd39f6567613e6ff5919becb2fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45810 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Ezkinil w/ eMMC to OS. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa Reviewed-on: https://review.coreboot.org/c/coreboot/+/45852 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on morphius with and without patch, confirm ~7ms improvement BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08device: Clarify use of `config_of()`Nico Huber
We don't want unnecessary die() calls to spread throughout coreboot. Chances are high that we'd add a NON_FATAL_DIE Kconfig eventually. Change-Id: I01c7efdf23672bad3a195b7dc1565a3cc8a087bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46046 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/dedede/variants/drawcia: Update TSR1 passive trip temperatureSumeet R Pawnikar
Update TSR1 passive trip temperature BUG=b:169691800 BRANCH=None TEST=Built and tested on dedede system Change-Id: I172391daca981d5591fa9cc5eacad92521dd0dc5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-08mb/google/dedede: Configure VR in devicetreeMeera Ravindranath
BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3ea32218040263f0abef9b9dd4c52efb16289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45825 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/intel/jasperlake: Add VR Configuration settingsMeera Ravindranath
This CL fixes the CPU Throttling issue. BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3fa32218040263f0abef8b9dd4c52efb31289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-08Revert "soc/intel/jasperlake: Disable PAVP UPD"Nico Huber
This reverts commit 69589294c205b616e80cafbbfb0b33e105a75386. No reason was given why this should deviate from the other platforms and the author can't explain it. Change-Id: I2e8d6f9bd4ebba69b6f7cdd9a1c5d08aaf2e798f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 10:53:21 +0000