| Age | Commit message (Collapse) | Author |
|---|
|
Enable SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT for tigerlake.
BUG=b:142961277, b:145494156
BRANCH=none
TEST=none
Change-Id: I1f785f410982f7d7598942f9b12196851e77c240
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37629
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL allows MKBP events from the EC to wake the system from suspend
states.
BUG=b:144122000
BRANCH=firmware-hatch-12672.B
TEST=Verify that MKBP events generated from EC will wake the system
from S0ix.
Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Values as per "IT8772E Preliminary Specification V0.4 (For F Version)".
Some values are unclear on this document, but is the only one I have.
Change-Id: I6d74984f453c47d6ec71963a7dcab961a22a5964
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The firmware configuration (fw_config) field is store in the CBI EEPROM
and it should be used to make firmware customization instead of
sku/variant id.
BUG=b:145519081
TEST=builds
Change-Id: I790998a29e724ecdff8876cca072267537b7cea6
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Copy ec_commands.h directly from Chromium OS EC repo at sha e57217a250.
This is needed for the FW_CONFIG CBI field definition.
Change-Id: Id010721033ebe32ac9c9482d666cf790442a26ee
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add initial fsp upd settings for TGL, both romstage and ramstage upd's to
support basic build and boot of TGL RVP.
- Add Silicon upd settings which includes
* Serial IO/UART settings
* Graphics settings
* USB2/USB3 settings
- Add Romstage upd settings which includes
* Pcie Root port settings
* IGD initialization
* Hyper Threading settings
* SMBus controller settings
* Debug probe settings
BUG=none
BRANCH=none
TEST=Build and boot Tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I16df66451fd3a681df1222d283d97dd6bdaff0e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37960
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIOs are divided into different communities. Each community
consists of one or more GPIO groups. We need to configure the
groups from coreboot so that they are mapped properly.
GPIO communities should be properly configured in GPIO_CFG and
MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured
in GPIO_CFG register while the PMC_GPP_* in pmc.h are used to
configure the MISCCFG registers.
BUG=b:144680462
BRANCH=none
TEST=Build and boot tigerlake rvp board. Verified that after
setting the gpe from devicetree the GPP_EN register for
that community gets updated setting that specific bit.
From the iotools i checked that GPE_EN register for that
community is updated with that specific bit set to 1.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I585100375feee39b5a9105bdf6d9f5ca3a5bb2fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Add Elkhartlake CPU, SA and PCH IDs.
EHL PCH is code named as MCC.
Also add a MCH ID (JSL_EHL) which is shared by both JSL and EHL SKUs.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I03f15832143bcc3095a3936c65fbc30a95e7f0f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38489
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update interrupt header and interrupt mapping per Intel Silcon reference code.
Need to match pci_irqs.asl with FSP setting which followed by PCH BIOS spec.
Reference
PCH BIOS spec#613495
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ClientOneSiliconPkg
/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/PeiItssPolicyLibVer2.c
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iffc4efad4d0aa55fc0de88d7fe32c0356dbc3c60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38258
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align the fbg1701 sleepstates implementation with monolith.
BUG=N/A
TEST=build
Change-Id: I3a715781bf51da41d6954463ad38ed94b0dfd217
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The monolith board doesn't support the S3 and S4 states because of the
watchdog and failover mechanisms.
Remove S3 and S4 from the available sleepstates.
BUG=N/A
TEST=build
Change-Id: I01f67d8bb3f9e45caef748caca91eeb6859d7393
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Some boards don't support S3 or S4. The S4 state can't be removed from
the available sleep states.
Add a config item that allows removal of the S4 state from the list of
available sleep states. The S4 state can be removed by selecting the
item on board level.
For the AMD chipsets the SSFG mask is updated to remove the S4 state.
BUG=N/A
TEST=build
Change-Id: Id802c4cc40308ddf39e99e7f226d55e0e020f0c9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38431
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to VRTT report, add ac/dc loadline configuations in puff device
tree.
BUG=b:147206535
BRANCH=None
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All ac/dc loadline configs were set correctly.
Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Jinlon will use EC to control fan, so remove DPTF fan control.
BUG=b:141259174
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ONBOARD_VGA_IS_PRIMARY is selected if board selects
DRIVERS_LENOVO_HYBRID_GRAPHICS.
See commit 35abe73e with Change-Id:
I6594fbb957c9a8135fe670d38b5755adf29d2dff ("mb/lenovo/t430: Fix Dual
Graphics").
Change-Id: I39687e5cd34979fd4318978f5aa46ac6cdf721e8
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6c7bbb89af88cce1a53c21a4b4d8bc1c284e1cb2
Signed-off-by: Ivan Vatlin <jenrus@tuta.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use information provided by AGESA to fill the SMBIOS memory tables.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I45bb2fc36cf0c01670e9fc8559d3a6183ea271f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Following the example of change CB:37737 (ee8f969).
Switching was done by moving a SIO configuration and
the clocks setup from 'romstage.c' to 'bootblock.c'.
Tested-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Change-Id: I2e710ac61843c09a055523c7971e4c05bae56a37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix devicetree to advertise the correct USB names and types
in the generated ASL.
BUG=b:146437991
BRANCH=none
TEST=booted and inspected the reported generated ASL.
Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add SMMSTORE support for saving EFI NVRAM variables in
conjuction with Tianocore payload.
Test: none, as this duplicates tested functionality in
amd/stoneyridge.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Id05b33edf949611c3f9eac94e7b63a4266c6c4d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibb37c2d99c1a95b1d37bec784c98e636da4836d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38470
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Build tested on Ubuntu 18 LTS, FreeBSD.
Change-Id: Ida2c1f36aba7469d69dbb12ee6afce4a181bd6b7
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3d0ab7dacb5facb7dd14dd471cd0fb9f06bf0e37
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing rule created a potential race condition between creating
the directory and putting files in there, so use our existing
infrastructure for directory creation instead.
Change-Id: If52a9f558c7d9ce85f71ba53232594699c9d357a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37798
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the ACPI code needs to be extended, as smihandler.c already
supported it. The _Q50 Method is just _Q18 with changed name.
On Linux, pressing the undock button does nothing, so the only safe
way to undock is to press Fn+F9. With this patch, when the undock
button is pressed, the green LED lights up, and undocking is safe.
Change-Id: Iaaecad031bb1f39dd1a778d0c8eaea6bce9e0f57
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38446
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Nuvoton NCT5104D GPIO IO VLDN and define an IO base address
unused by any peripheral for GPIO use.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I034c5d0169b8d97eac97a20c92c22816fd674f79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Now, Super I/O GPIOs can also be controlled directly through
access to I/O registers. VLDN 108 and specific I/O port from a range
<100h; ff8h> may be enabled in mainboard devicetree.
Change-Id: I4ce99bb44e6f5db684170f4190bdc38a944849f6
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35849
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=tested using fwts on a facebook monolith.
Found-by: fwts 19.12.00
Change-Id: I25a842539ee2e8febc8a1ae88843a71ccb4ee68e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38133
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mainboard ASL code contained a power button definition. This is not
required as the system uses the standard ACPI power button.
Remove the PWRB device from ASL.
BUG=N/A
TEST=build
Found-by: fwts 19.12.00
Change-Id: I4fac1411fd99475551bc970818759649f80b3f0e
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38134
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iee75faaef713dd6ec6b6e2d536df09a41010eebf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add SMMSTORE support for saving EFI NVRAM variables in
conjunction with Tianocore payload.
Test: build/boot several google/kahlee variants, test
manipulation and persistence of Tianocore bootorder variables.
Change-Id: Ida604a44d1fa5288e96dbe05de1f847e597cc95d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When regions are resized they are always aligned to the top of the
region. For the BIOS region this is correct. The other regions however
should be aligned to the bottom of the region.
Update the region handling to only align BIOS region to top of region.
BUG=N/A
TEST=verified image resize
Change-Id: Ied0e763b5335f5f124fc00de38e5db1a4d0f6785
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
NOTE: The ME interface was disabled on folio_9470m and revolve_810_g1.
It is assumed that they were ported while the ME was in an abnormal
state (usually due to me_cleaner usage), and that it should be enabled.
In any case, the MEI device is hidden if the ME fails to boot already.
Change-Id: Ibf32a034653946f49f72a2c19c41a4033964ef83
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update Makefile.inc so as to add the SPD data when needed. Tested
building other variants, no spd.bin gets added because they don't select
GENERIC_SPD_BIN.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0cda3f839baa227ce6a4b8f0510934125e5afb59
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I65696c5739469b33253c22c1d5a65cc31ef3a421
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since this board does not have integrated graphics, do not install the
INT15 handler if it is not selected in Kconfig.
NOTE: Since cmos options are not very flexible, this board ends up with
a spurious gfx_uma_size option. Other than that, everything is the same.
Tested with BUILD_TIMELESS=1, binary does not change when ignoring the
cmos options.
Change-Id: I2ebcfd5160773bf98a3d23e797a89e290063d112
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I6dbecb0b4d38ed4af8966f5391fce1f2c9c5d182
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I17b6ac9ac2433b760e125a1ce708d3b422b632b5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: Idc4d0a3d7384ad4e5a3eb3d7ecefaa2f35093ac0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Get ready to squash all the HP Sandy Bridge and Ivy Bridge laptops
together, so as to factor out lots of repeated code.
Tested with BUILD_TIMELESS=1, binary does not change.
Change-Id: I0b68e524b57e3705e91e3cd98be5571b3554bd67
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change stapm percentage to 80 and time to 2000 seconds make
DUT meets Lenovo spec and pass CTS respectively.
BUG=b:147333429
TEST=build firmware and install it to DUT and run CTS relevant
test, check temperature whether meets spec.
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6a2f059fbd5c89f897cfb46d1f7a82b0923edb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38443
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These predate hyperthreading so they are not SMP capable unless installed
in a SMP board. Turning SMP off shaves 128 compressed bytes from
ramstage.
Change-Id: I114bdc83ed40ccd9d3996aabf77422236d9d12fa
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds CML-S 2 and 4-Core MCH IDs and fix wrong ID for
10-Core ID.
Change-Id: I30f6c8a5234b7754d984b598bf7bae103ec9712e
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
- Disable Windows driver DPST function
- Set POST resolution to 1800x1200
- Set POST brightness to 225 (0-255 scale)
Test: Boot Windows on EVE, verify display backlight control
functional and no lock ups from switching in/out of tablet mode.
Change-Id: Ida64a44df2449f1ff0dc5c8d0ec7b40a183566a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Base on SATA SI report to fine tune the strength for port 1.
BRANCH=none
BUG=b:147351936
TEST=build and test SATA port works fine.
Change-Id: Ib82b7e5df32b4ce794682781f33c44dfeb6e68bf
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add config to chip.h for tuning SATA gen3 strength.
BUG=b:147351936
BRANCH=none
TEST=build successful in puff
Change-Id: I4dcd23834fa3c01c1d88697a7bb8cf361709b62e
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38432
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IMD provides support for small and large allocations. Region IMD Small memory is 1 KB
with 32 Bytes alignment, this region holds smaller entries without having to reserve a
whole 4 KB page. Remaining space is assigned to IMD Large to hold various regions with
4 KB alignment.
The UCSI kernel (kernel version 4.19) driver maps the UCSI_ACPI memory as not cached.
Cache mapping is set on page boundaries and all IMD Small is within the same page.
If another driver maps the memory as write-back before the UCSI driver is loaded then
the UCSI driver will fail to map the memory as not cached.
Placing UCSI_ACPI in IMD Large region will prevent this mapping issue since it will
now be located within its own page. This patch will force UCSI_ACPI region to be
located in IMD Large region.
BUG=b:144826008
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Id00e76dca240279773a95c8054831e05df390664
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and update ACPI files for Tiger Lake SoC
Use ASL2.0 code syntax for new acpi(camera_clock_ctl.asl)
Reference
PCH EDS#576591 vol1 rev1.2
PCH EDS#575857 vol2 rev1.0
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ib82156830273c2937f5f02713ed7dd27da41c857
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37781
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates pci dev definition according to TGL EDS.
Add GSPI3 case in chip.c according to updated pci dev definitions.
Reference
TGL Process EDS#575681 rev1.0
TGL PCH EDS#576591 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4717ac3cc877b13978b18ada504740512f10c709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38341
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the VBOOT_ALWAYS_ALLOW_UDC option to actually enable the xDCI
controller.
BUG=N/A
TEST=build
Change-Id: Ib51f2c82e69db83cebceb71ba5f1305764e0feca
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
When a VBOOT enabled system is used without ChromeOS it may be valid to
allow the UDC independent of the vboot state.
Provide the option to always allow UDC when CHROMEOS is not selected.
BUG=N/A
TEST=build
Change-Id: I6142c4a74ca6930457b16f62f32e1199b8baaff8
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update Tigerlake RVP UP3 devicetree to reflect devices used by
tglrvp_up3.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Idd0d9efe0ab4e050d2160f7662e4dc40a002672f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37929
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix typos and replace spaces with tab in macro definitions.
TEST=Build and Boot hatch board
Change-Id: I43b2df7defc97aaeb7c8c9dfbe08ce78ba81f39b
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38384
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Below changes are done in the patch:
1. Remove unnecessary lining, and replace spaces with tabs
2. Add description for macros
3. Correct comment mentioned for wrapper #ifndef
TEST=Build and Boot hatch board
Change-Id: I630446234321e7998ab42f8506a58b16e9ce4eb0
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update chip files to include :
- Update chip.c based on TGL FSP
- Update chip.h based on TGL FSP
- Update Kconfig : Define CONFIG_MAX_PCIE_CLOCKS for chip.h update
- Update pmc_utils.c and JSL devicetree for build failure
Reference
PCH EDS#576591 vol1 rev1.2
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ie1518a7ffa69079fe82232afe229d9e1ffe29067
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37783
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake SoC doesn't have GPIO defined for GPP_G. so compilation is
failing due to this.
We will update correct gpio for sd card detect once we have Jasper Lake
soc gpio patch.
partner bug for tracking: https://ticket.coreboot.org/issues/251
BUG=None
BRANCH=NONE
TEST='jslrvp' mainboard builds successfully
Change-Id: I097b2f3a4fef1a487495a4aa9d2bcf88aa64f017
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The new documentation describes typical ways that mainboards will
set up their GPIOs, as well as the distinction between "early"
and "normal" GPIOs. It also describes the typical properties
that GPIO configuration will cover.
Change-Id: I279eec4ed2bb0248a2bdb363fb73b40b8272267f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Code in SMM segment using cmos_post_code will give compiler error since
cmos_post_code function is not getting compiled during SMM stage.
Also as per patch discussion, CMOS uses a split IO transaction and it's not
really safe to call cmos_post_code from SMM context. Thus we'll hide the
call for SMM context.
Change-Id: Iffdcccaad48e7ad96e068d07046630fbe4297e65
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I6724637c7333ae6be7ada3e8ebe878b2a1061dd1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use 'irremovable' over 'unremovable'
Change-Id: Id305dbe56a93740abc49d85d11402d1b63989dad
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37527
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia8e6e5bd5ac2565263d81df8ca81d62436a3301f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Below changes are done:
1. Consistent HECI command/group ID naming.
2. Rename macros to match with Intel ME BIOS Spec.
3. Move command ids, group ids and related macros into cse.h
4. Add description for structure members.
TEST=Build and Boot hatch board.
Change-Id: Ia902095483d5badf778d0c1faa6bf8cc431f0e50
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Base on USB SI report to fine tune the strength and correct
some OC pin settings.
BRANCH=none
BUG=b:147206010
TEST=build and test all usb ports function work fine.
Change-Id: Idbee5cdddf3a83f97109214a95e0f9875b3b3f8f
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Not "NOPOST except when the board says something else".
Change-Id: I3608e9c3a7d2338363a4320c8718b20ef25a038a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was never filled it, it probably never will be filled in, so stop
the pretense.
Change-Id: I7632b763b8518304d36a818ce262cc127f95b9f0
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=N/A
TEST=build
Change-Id: Id7267aa6d4266bb7807fb3c25b5e2704c8d81df7
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38430
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Prevent iasl remarks about unused parameters.
BUG=N/A
TEST=build
Change-Id: I54fa4712e618038fdd5a96c2012c2ec64ca34706
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Read the CPU temperature from the EC.
For this board the EC support is limited to reading the CPU temperature
sensor at this moment. Events are not supported.
BUG=N/A
TEST=tested on facebook monolith using acpidbg
The TSR0._TMP method is returning the correct values.
Change-Id: I6793070602e253f1e15cfc641bb47d25d269b136
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
When vboot was first integrated into CBFS it was still part of Google
vendorcode. So to not directly tie custom vendorcode into the core CBFS
library, the concept of cbfs_locator was introduced to decouple core
code from an arbitrary amount of platform-specific implementations that
want to decide where the CBFS can be found.
Nowadays vboot is a core coreboot feature itself, and the locator
concept isn't used by anything else anymore. This patch simplifies the
code by removing it and just calling vboot from the CBFS library
directly. That should make it easier to more closely integrate vboot
into CBFS in the future.
Change-Id: I7b9112adc7b53aa218c58b8cb5c85982dcc1dbc0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch removes the CBFS locator override for the Apollolake SoC and
instead integrates the extra sanity check it was used for straight in
the boot device initializer.
Change-Id: Iccdb885be233bb027a6a1f2cc79054582cbdf3fc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update the IccMax for the SYSTEM_AGENT and IA_CORE power supplies
according to the information in the schematic. The IccMax for these
supplies is lower than the standard supported by the SoC.
BUG=N/A
TEST=build
Change-Id: I20b92e7dfc85427bcf9cb9f0efda02459c862809
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Provide Puff with it's own copy of ec.h copied from the
baseboard/includes however with the battery, lid and ps2
defines stripped.
This is to ensure the correct ASL is generated so that we don't
advertise PS2 keyboard support and battery/lid interrupts which
don't exist.
V.2: drop EC_ENABLE_ALS_DEVICE as well.
V.3: set MAINBOARD_EC_SMI_EVENTS to 0 and drop
EC_HOST_EVENT_LID_CLOSED smi event.
V.4: drop EC_HOST_EVENT_MODE_CHANGE &&
provide wake pin for EC for _PRW WoL method
V.5: drop EC_HOST_EVENT_KEY_PRESSED
BUG=b:147850335
BRANCH=none
TEST=builds
Change-Id: If13bd124c7229ced996efb841980604d13be09af
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board from NVMe
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ib4b85db667c27d266d2ed5a4aa4f4dffa3dd527e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38286
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
By grouping the spi flash parts by their {vendor, sector topology}
tuple one can use a common probe function for looking up the part
instead of having per-vendor probe functions. Additionally, by
grouping by the command set one can save more space as well. SST
is the exception that requires after_probe() function to unlock the
parts.
2KiB of savings in each of verstage, romstage, and ramstage
on Aleena Chrome OS Build.
Change-Id: I9cc20ca0f3d0a1b97154b000c95ff2e7e87f3375
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
To further drive to a common approach for describing the spi flash
parts in the drivers add spi_flash_part_id object. All the drivers
are updated to utilize the new object. Additionally, the driver_private
is also not needed in the spi_flash object.
A Chrome OS build of Aleena provides 960 byte saving of text. A subsequent
patch will save more memory.
Change-Id: I9c0cc75f188ac004ab647805b9551bf06a0c646b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There was code to handle the case of continuation bytes for identifying
the manufacturer id to a jedec rdid command. However, all the parts that
currently supported have this defined to be 0. Remove the unused
continuation byte support.
Change-Id: Ia7c63162e4ef9dc46ef916ca8c31ebd721cbeca7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38361
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Helios does not have MAX98357A speaker amplifier, so remove the devicetree
entry.
BRANCH=firmware-hatch-12672.B
Change-Id: Id02410553f018385d407086b2f9bc3ee1e7a5f40
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
specific Kconfig
This patch moves common pch code SOC_INTEL_COMMON_BLOCK_THERMAL Kconfig selection
into SoC specific Kconfig selection as PCH thermal device is not available
with latest PCH (i.e. TGP and JSP).
Also added TODO for TGL thermal configuration as applicable.
TEST=Able to build and boot TGL RVP with this CL
Change-Id: Ibce17cc9f38fb666011ccd8f97bee63033ff5302
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38444
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The adesto, amic, atmel, and stmicro spi flash drivers didn't have
the status() call back. These parts do support the status command
retrieval. Fill them in accordingly.
Change-Id: Ie0e63bec844b8e01e292ef8c4df707494df02e69
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Put the write protection into its own object. This allows
for easier future reuse of objects in future consolidation
patches. It's also possible to eliminate the code implmementing
these in the future if the platform doesn't require it. For now
leave current behavior as-is.
The names of the callbacks were shortened as they are now in
the spi_flash_protection_ops object which is a new field in the
spi_flash object.
Change-Id: I2fec4e4430709fcf3e08a55dd36583211c035c08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
spi_flash_erase() and spi_flash_write() already assume their
respective callbacks are supplied in the spi_flash_ops object.
Make the same assumption in spi_flash_read(). In order to do this
the spi_flash_ops objects from the drivers need to reference the
the previously used fallback read command, spi_flash_read_chunked().
This function is made global and renamed to spi_flash_cmd_read() for
consistency.
By doing this further dead code elimination can be achieved when the
spi flash drivers aren't included in the build.
A Hatch Chrome OS build achieves a further text segment reduction of
0.5KiB in verstage, romstage, and ramstage.
Change-Id: I7fee55e6ffc1983657c3adde025a0e8c9d12ca23
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I7fe3e798346e760eebb357f20e55ee1a71a1e31a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I32fcd36298f41d3b6d8b3e16b6641b9404220461
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch doesn't change the resulting binary of a timeless build.
Change-Id: Ife0e70699df3efa162f8f6c0fd8c2928887fda2d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This is to get a uniform format that matches the macros added in the
next patch, so that said follow-up patch won't change the output binary.
lenovo/x230 still boots with this patch.
Change-Id: Ibfbeb847cab09427a57bef3cbd2069036de5a21e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
LDN 0xf keeps registers with open-drain configuration of the GPIO.
Enabling the LDN is required for proper GPIO soft reset operation
by the SuperIO driver.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia769e3d8e66015297942bddf328a6fde0bb27ce6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
So far, only hard power off could reset GPIOs state to defaults:
IN, Open-drain. Now, defaults are set with every boot to ensure
that GPIOs are not in unknown/unwanted state.
Change-Id: I67878dbab2ddf0deaaa8f5d79416368c6164ba1d
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The fast spi driver implements hardware sequencing which abstracts away
the underlying spi flash commands in the hardware block. It also has its
own spi flash probe function to intercept the spi flash ops. As such it's
not necessary to include all spi flash drivers.
On a hatch Chrome OS build this saves 9.5KiB of text in each of verstage,
romstage, and ramstage.
Change-Id: Ifb1b962cde3a6a02353ddf83279234057a9ec2fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a new Kconfig option, SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS,
to make it easier for other parts of the code base to indicate that
all spi flash drivers should not be included.
Change-Id: Ibf2c4f1d2b8a73cff14bb627ddf759d7970920ea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Modify header files to update/include tigerlake:
- IOMAP BARs according to silicon reference code
- Update Serial IO devices according to PCH EDS
- Add board types
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I185f2c22c54a6ae386527069606abb52cce1ec80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Update the two flashrom URLs to use HTTPS. All other URLs are already
using HTTPS.
Change-Id: I8e9861b2748289522ab418960a463ae55ab0d2d3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename array and use defines for the values.
The patch doesn't change the resulting binary when using BUILD_TIMELESS=1
Change-Id: I774373d231a0f4a2fe82ab7c6f1318fc56bcc678
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
LyCx(r, x, y) was a duplicate of the CxLy(r, x, y) with different order
of computation, so that the big refactoring doesn't change the output
binary of a timeless build. Now this workaround can be dropped.
Tested on lenovo/x230: still boots
Change-Id: I251b4dd383f954b27f392190092e06a9a06668e2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The current BIOS-extracted VBT breaks backlight control
with Tianocore, so replace it with one that does. Settings
were exported using Intel BMP tool and the overlayed onto
a GOP-format (vs BIOS format) VBT file.
Test: boot google/wolf with both SeaBIOS and Tianocore payloads,
verify backlight control functional under both Linux and Windows.
Change-Id: Id6281c8dfb6e0001be8c4d9be1013f2d4bbb5880
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There are more instances of PCI_DEV(0, 0, 0), so use the macro for them.
Note that the resulting code with PCI_DEVFN(0, 0) is weird. It shall be
replaced with config_of_soc() in a follow-up.
Tested with BUILD_TIMELESS=1, resulting binary is identical.
Change-Id: Ia50965a108a734d192b584291a0796a2f2bc3a55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38338
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also update the known-good versions of the needed tools.
Change-Id: I0f63860beb0a8a00360752318236e302c7170977
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37952
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add mainboard stubs for Dedede. More functionalities will be added later.
BUG=b:144768001
TEST=Build test.
Change-Id: I7e6cb8adaee7b6bb95e9a96f96466646a78bd0fc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38277
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating Kconfig to add Chrome OS support with
both internal and external EC
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ia63c06e3b4b4effcace7a8458b1066a615de2008
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38148
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a initial mainboard code aimed to serve as base for
further mainboard check-ins.
This is a copy patch from icelake_rvp as on commit ID:
I64db2460115f5fb35ca197b83440f8ee47470761
Below are the changes done over the copy patch:
1. Rename "Icelake" with "Tigerlake".
2. Replace "icelake_rvp" with "tglrvp".
3. Rename "icl" with "tgl".
4. Remove unwanted SPD file, add empty SPD as
placeholder.
5. Replace "soc/intel/icelake" with "soc/intel/tigerlake".
6. Empty romstage_fsp_params.c, to fill it later with
SOC specific config.
7. Empty GPIO configuration, to be filled as per board.
8. Change copyright year to 2019.
9. Add board support namely BOARD_INTEL_TGLRVP_UP3
10. Replace icl_u and icl_y variant with tglrvp variant.
11. Remove basebord gpio.c and rely on variant override.
12. Remove HDA verb table and config support.
Changes to follow on top of this:
1. Add correct memory parameters, add SPDs.
2. Clean up devicetree as per tigerlake SOC.
3. Add GPIO support.
4. Update chromeos.fmd to make 32MB BIOS region.
5. clean up and make empty devicetree setting
TEST=Build tigerlake rvp board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I86ada611de1cf28a1b872eea35cf41c0dc1c57f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
A function draw_rounded_box() is added to draw a box with rounded
corners. In addition, this function is different from draw_box() in 2
ways:
- The position and size arguments are relative to the canvas.
- This function supports drawing only the border of a box (linear time
complexity when the thickness is fixed).
BRANCH=none
BUG=b:146105976
TEST=emerge-nami libpayload
Change-Id: Ie480410d2fd8316462d5ff874999ae2317de04f9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
