summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-18mainboard/google/Kahlee: Select low-power mode for WiFiSimon Glass
Put the PCIe clock pins in power-saving mode for the WiFi module to save power. Note: This currently does not appear to have any effect on grunt. BUG=b:110041917 BRANCH=none TEST=boot without this patch: $ iotools mem_read32 0xfed80e00 0x0046f3ff With this patch: $ iotools mem_read32 0xfed80e00 0x0046f3f1 Change-Id: I389815bc36b8610a30b0cbb9d73262ad392e0181 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-18mainboard/google/kahlee: Enable ASPM on PCI expressSimon Glass
We should use active-state power management where possible to reduce power consumption during normal operation. Enable these options. Linux does not seem to enable this for AMD, and the Intel code in coreboot does enable these options. PCIEXP_COMMON_CLOCK is enabled also, to follow how Intel does it. BUG=b:110041917 TEST=boot on grunt, see that WiFi and eMMC still run OK Change-Id: Ia7c711304ffe460a9fb0d4f654a51485958239ea Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27464 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18riscv: add CAR interface Xiang Wang
Add an interface to support cache as ram. Initialize stack pointer for each hart. Change-Id: Ic3920e01dd1a7f047a53de57250589000a111409 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-18mb/google/octopus: Create meep variantJustin TerAvest
This creates a meep variant for octopus. The devicetree overrides are copied from yorp, otherwise everything just defaults to baseboard settings. BUG=b:111543000 TEST=None Change-Id: I791f8d1589d7323fbe884dddf0f9d7362a41b9ac Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18superio/nsc: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I0c820254e97e3f80470d148552af06940e147b74 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-18superio/smsc: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I16e485494e448ae02e0a7b9e21b90ddbb1a53a4b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-18superio/ite: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I5f03a4064778c419f4b9c50e70db1296addf6c9e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-18security/vboot: fix typoRaul E Rangel
BUG=none TEST=none Change-Id: I7027abee66ccdf9b2d37df60ca7f4dbbbae2f9e4 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27517 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18what-jenkins-does: Pass V=1 through to abuildMartin Roth
Even though we were setting V=1 in the build, this wasn't getting passed to abuild, so the builds there didn't have additional debug information. That made it difficult to debug issues on the builder. This sets the verbose flag for abuild if V=1 is set. Change-Id: Id9ec50add9693a6c36ffdb5c78d148d0fc012549 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-18superio/nuvoton: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I18345d7cc50a7d46cb15584dfb54df28e8534f81 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-18mb/lenovo/x201: Add data.vbt fileArthur Heymans
Extracted from live running Thinkpad X201 with vendor firmware. Change-Id: Ia33b4c1a2af6f7d460375cc8ea4e404963a72244 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-18soc/intel/common/block: Add WhiskeyLake W0 CPUIDKrzysztof Sywula
TEST=Boot up with W0 stepping processor. Change-Id: Ia7bcfd5235e57c70aa3f15d0042da8b16cf7e186 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/27500 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18sifive/fu540: add empty sdram init and size functionsPhilipp Hug
Change-Id: I65f900a3277bc8a4a83ebc8883d4a325bd690bf8 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-17libpayload/generic_hub: Detect port disconnect after resetRaul E Rangel
If a port disconnects after a reset we should abort any initialization on the port. This might mean the device has re-enumerated as a 3.0 device so the hub should be scanned again. BUG=b:76831439 TEST=Verified USB-C devices that get detected correctly in depthcharge. Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17riscv: add support for modifying compiler optionsXiang Wang
Each HART of a SoC like fu540 supports a different ISA. In order for the coreboot's code can run on each core, need to modify the compile options. So add this code. Change-Id: Ie33edc175e612846d4a74f3cbf7520d4145cb68b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-17pnp_device: improve readabilityFelix Held
Add comments on the ops handling in pnp_enable_devices function and the pnp_info struct. Also remove the negation in the check if an LDN-specific override is used. This patch doesn't change the logic though. Change-Id: I3e80dbce1f29ee3e95e3b1d71c9b8479561d5c1a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-17soc/amd/stoneyridge: Update ACPI external processor nameKevin Chiu
update external processor name to match declaration in SSDT. in SSDT: Processor (\_PR.P000, 0x00, 0x00000410, 0x06) {} Processor (\_PR.P001, 0x01, 0x00000000, 0x00) {} in DSDT: External (_PR_.CP00, UnknownObj) External (_PR_.CP01, UnknownObj) After fix this, ACPI _PSL (Passive List) now can return correct list of processor objects for thermal passive cooling. BUG=b:111478152 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I78c838608c78eb7b5e3f8d5c67589e082c756201 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27495 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17security/vboot: Add interface for FSP 2.0 mrc cachingPhilipp Deppenwiese
* Move vboot/tpm specific implementation to vboot. * Only call functions if CONFIG_FSP2_0_USES_TPM_MRC_HASH is set. * Preparation for software hash function support, no logic changed. Change-Id: I41a458186c7981adaf3fea8974adec2ca8668f14 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24904 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17libpayload/xhci: Check noop return code when debuggingRaul E Rangel
Make it obvious that the command has failed. BUG=b:76831439 TEST=Verified on grunt Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload: Add UNKNOWN_SPEED to usb_speed enumRaul E Rangel
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum is unsigned so this results in a positive value which implies success. Adding a -1 to the enum will make it signed so the >= 0 check will work correctly. BUG=b:76831439 TEST=verified on grunt that -1 is returned when port is disabled. Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17Documentation/mb/sifive: Update TODO list; UART driver has been mergedJonathan Neuschäfer
See 894e3a9ec8 ("drivers/uart: Add a driver for SiFive's UART"). Change-Id: I035c238beba28ecafd296f18c0ccda167126ab94 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/27398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17Add VBT data for Gigabyte GA-H61-S2PVp4block
Extracted from the stock UEFI using UEFItool & intelvbttool. Without it, the kernel complains about the missing VBT table. Additionally, the invalid oprom signature warning given by i915 is also gone. Change-Id: I1871eca9e9c21531d842289f6624ec44420d9844 Signed-off-by: Pablo Moyano <42.pablo.ms@gmail.com> Reviewed-on: https://review.coreboot.org/27482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-17mb/google/atlas: Add MIPI camera ASL filesChen, Ping-chung
Atlas has one sensor, create a single endpoint to CIO2. Create power resource for enabling/disabling camera. BUG=b:111141128 Branch=None TEST=Testing on Atlas board Change-Id: Ide0e923bbc34f869dd0227c0a29977645bc5d58d Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/27350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-17util/docker: Update coreboot-jenkins-node dockerfileMartin Roth
Because earlier versions of debian set /dev as a standard tmpfs filesystem, that was a simple place to build. Now, this has been changed and /dev isn't a standard tmpfs that will grow to 50% of memory. It's a fixed, very small size, and can no longer even be resized. Because of this, create a new directory to build in and add it to /etc/fstab. Mount it when the container is started. As long as we're at it, make the other build directories (ccache and slave-root/workspace) tmpfs as well. The builders we're using now have plenty of memory, so don't write any of the files to disk. Update the Makefile to get rid of all references to ccache directory. Change-Id: I21fd2c4395d7ffb9428172f035991338658cd907 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-17vendorcode/cavium/include: Make bdk_pop and dpop staticMartin Roth
Fix an undefined reference error with GCC 8.1 /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-size.o: In function `bdk_dram_get_size_mbytes': /home/coreboot/slave-root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk /libbdk-dram/bdk-dram-test.o: In function `bdk_get_num_cores': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal /bdk-utils.h:164: undefined reference to `bdk_dpop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram /dram-init-ddr3.o: In function `init_octeon3_ddr3_interface': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/bdk/libdram/dram-init- ddr3.c:7550: undefined reference to `bdk_pop' /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/romstage/vendorcode/cavium/bdk/libdram /dram-l2c.o: In function `bdk_get_num_cores': /home/coreboot/slave- root/workspace/Testing_coreboot/src/vendorcode/cavium/include/bdk/libbdk-hal /bdk-utils.h:164: undefined reference to `bdk_dpop' make[1]: *** [src/arch/arm64/Makefile.inc:119: /cb- build/Testing_coreboot.0/CAVIUM_CN8100_SFF_EVB/cbfs/fallback/romstage.debug] Error 1 Change-Id: Ifcde5476c6f347c0eac7ca44bac88d3fa4017fb7 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2018-07-17cavium/bdk: Poke the watchdog while PCIe initPatrick Rudolph
Prevent a reboot loop due to slow PCIe init. Poke the watchdog a few times. Change-Id: I03739d7dbad3072ccf77364fa4caba42c66ac643 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27455 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix reference clockPatrick Rudolph
Swap 100Mhz and 156Mhz reference clock. Correct values are taken from __bdk_qlm_sff81xx_set_reference(). Tested on Cavium's cn8100_sff_evb. Change-Id: I312ce7379b361594249f9f26f4e561ebf57347df Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27454 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix possible divide by zeroPatrick Rudolph
Fix Coverity CID1393970 Change-Id: I5db6866b8e51eaea201a4c03e59d7d00f4f826e7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17cavium/bdk: Fix coverity and remove hardcoded DRAM speedPatrick Rudolph
* Fix CID1393963 (Uninitialized variables) * Comment in working code * Remove workaround to limit DDR speed Change-Id: I96289da43c1018c2fdf9d013ce7f21d7511ba595 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27452 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Read DDR freq from memory controllerPatrick Rudolph
The BDK config subsystem can't store values in romstage. Read frequency from DDR memory controller instead from BDK config. Fixes memory info showing always 0 MT/s. Change-Id: Iaee33e57e27ca182f41be923cf950868f66d3638 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27451 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17cavium/bdk: Fix possible buffer overrunPatrick Rudolph
Fix Coverity CID1393975 Change-Id: I275cabf55fba464be7bd4c21dfe5826ea554ac84 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17bdk: Use Kconfig options instead of getenv()Patrick Rudolph
* Use Kconfig options instead of unusable getenv * Select CAVIUM_BDK_DDR_TUNE_HW_OFFSETS on CN81XX * Fix Coverity CID 1393976 (DEADCODE) Tested on Cavium's cn8100_sff_evb. Change-Id: Ia16c0161b0e9cf5d06418e46556c0fb45532a5b1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-17mainboard/google/kahlee: Don't default backlight onMarc Jones
Keep the backlight off until it is needed. BUG=b:72694972 TEST=Backlight turns on at ChromeOS splash screen, not prior. Change-Id: Ia1aba787734e2976146ecd305dd821f0b326f0db Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-17mainboard/google/kahlee: Enable backlight on resumeMarc Jones
BUG=b:72694972 TEST=Backlight turns on ChromeOS resume Change-Id: I452e2ea94b508b137cf52301df5d2d1ad5c9ab70 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17mainboard/google/kahlee: Enable backlight in SMI APMCMarc Jones
Enable the backlight in the OS callback to SMI for APMC. This keeps the backlight off until the OS is ready to display something. BUG=b:72694972 TEST=Backlight turns on at ChromeOS splash screen Change-Id: Idf32b1a3d45971883571a829a5c0c1f8563bb1f7 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17mainboard/google/kahlee: Add mainboard resume functionMarc Jones
Add the mainboard resume function and __weak variant override. Change-Id: I808734208bd1ce81428771ea203709b53db56cd3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17mb/facebook/watson: Update IDPROM region in board.fmdDavid Hendricks
This updates the IDPROM region along with the unused regions. Change-Id: If73bb8162d3d0733e3bd8561cd5549f2184db2be Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/27505 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-16soc/amd/stoneyridge: Add GPIO functions to SMMMarc Jones
GPIO functions are required by the Grunt SMI handler. Change-Id: Id729139b02c10bdd922b3df298f8f9feb1aff745 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16soc/amd/stoneyridge: Fix gpio_set functionMarc Jones
The gpio_set function was not writing the correct GPIO register address. Change-Id: Ib306773ac72505977b606836bbaf3e2067324894 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-16soc/cavium: Fix overflow before widenPatrick Rudolph
Fix Coverity CID1393974 Change-Id: I39caea8a248d2f1debfca307f6fb7a2fe3e431b1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16mb/lenovo/x201: Fix EC SSDTPatrick Rudolph
Move the EC under the LPC PCI device to make sure that the SSDT path matches the DSDT. Matches the behaviour of all other Lenovo devices. Change-Id: I9ded7f639866d71d39ea0d5d0c36602d386c177f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matthias Gazzari <mail@qtux.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-16libpayload: Make libpayload compile using gnu11Raul E Rangel
This matches coreboot. BUG=b:76831439 TEST=emerge-grunt libpayload deptcharge chromeos-bootimage then booted image Change-Id: I3a3baa03e03a31e9e75b201ac4fa642505fc1d3a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-16libpayload/xhci: Document struct offsets on xhci_tRaul E Rangel
This makes it easier to know what offset each register references. BUG=b:76831439 TEST=none Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-16google/grunt: fix thermal zone CPU temperature reportKevin Chiu
there are 3 thermal sensors and index is: 0: 1 Charger 1: 1 SOC 2: 0 CPU it needs to adjust sensor to index 2 to have correct CPU temperature. BUG=b:111284412 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I27afb6c5b64b0c39d6db15e6c61ea16a1fda1ca3 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16mainboard/google/kahlee: Add support for Dediprog em100Simon Glass
This device claims to run at 75MHz with dual read, but it is not always reliable. Add an option to change the SPI flash speed to 16MHz, to avoid any problems. BUG=b:111363976 TEST=manually try to get my em100 running (it doesn't yet) Change-Id: I78d3d32c467aac82c72d31c773bfb0f69808aed4 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-16Kconfig: Make the EM100 config option commonSimon Glass
This applied to AMD devices as well as Intel, although the mechanism is different. Move the option to a common place. BUG=b:111363976 TEST=USE=em100-mode emerge-reef coreboot See that a message appears: * Enabling em100 mode (slow SPI flash) Change-Id: Iea437bdf42e7bc49b1d28c812bfc6128e3eb68bd Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/27467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-13mb/google/poppy/variants/nami: Use Pantheon VBTIvy Jian
Add new Pantheon sku-id for loading vbt-pantheon.bin BUG=b:78663963 BRANCH=firmware-nami-10775.B TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27432 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13cbfstool: Show current FMAP region in printPatrick Rudolph
In case multiple FMAP regions are specified, print the FMAP name. Useful if VBOOT is enabled and multiple CBFS are printed. Change-Id: Id6f29ebeda8a9bde6dfe39362e0f2a5e33c86b26 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26862 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13intel/wifi: Add WGDS ACPI method for Geo Aware SARPratik Prajapati
To comply with all relevant bodies throughout the world, SAR settings take into account the lowest common denominator Tx power settings. This setup may lead to non-optimal performance when the user location is in a country that may allow higher power setting. The purpose of Wireless Geo Delta Settings (WGDS) is to provide offset settings for FCC, Europe, Japan and Rest of the world. These offsets would be added (by Intel wifi driver) to the base SAR Tx Power as defined in WRDS and EWRD BUG=b:65155728 BRANCH=none TEST=WGDS ACPI table gets created as expected. Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-13mainboard/google/kahlee: Add more 3 SPD filesMartin Roth
BUG=b:111195311 TEST=Build grunt, verify SPDs are present Change-Id: Ief5ed5c3ca1d96b36926f1fc84c344a8d66dcda5 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mainboard/google/nocturne: Update GPIO_FCAM_PWR_ENRicky Liang
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board schematics. Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e Signed-off-by: Ricky Liang <jcliang@chromium.org> Reviewed-on: https://review.coreboot.org/27433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-12Coverity: Fix CID1393976Patrick Rudolph
Cast to u64 to prevent possible integer overflow. Change-Id: I5c7d25278db54523242314cba6c85ac2f7a6c1f3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-12Coverity: Fix CID1393978Patrick Rudolph
Fix a typo. Only memcpy into target buffer if pointer is not NULL. Change-Id: I1aa4b2ce1843e53ab6ed2224eaa928fc79ea3b83 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-12Coverity: Fix CID1393979Patrick Rudolph
Fix resource leak in dt_set_bin_prop_by_path(). Change-Id: I1c4d7e01b25847a2091ad90d2d70711beae55905 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-12riscv: add include/arch/smp/ directoryXiang Wang
Replicate directory layout from x86 for SMP. Change-Id: I27aee55f24d96ba9e7d8f2e6653f6c9c5e85c66a Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27355 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12soc/intel/skylake: add a space in printing ME FPF statusPratik Prajapati
This is cosmetic change Before: ME: Power Management Event : Clean global reset ME: Progress Phase State : Unknown phase: 0x08 state: 0x10 ME: Power Down Mitigation : NO ME: FPF status : fused After: ME: Power Management Event : Clean Moff->Mx wake ME: Progress Phase State : Unknown phase: 0x08 state: 0x10 ME: Power Down Mitigation : NO ME: FPF status : fused Change-Id: I15c02045d0f94fdb3f4a028585cad488d4ac9aa6 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-12nb/i945/raminit: Correct C0DRAMW & C1DRAMW for 4 DIMMsElyes HAOUAS
Change-Id: Ib1f999447b37a1524d589552ea2eec640c2a2c7e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/18387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-12soc/intel/braswell/acpi/dptf/thermal.asl: Make Thermal event optionalFrans Hendriks
Currently thermal event support can not be disabled at board level. Define and dependent code are placed in same file. Move define of HAVE_THERM_EVENT_HANDLER to mainboard file. Change-Id: Icb532e5bc7fd171ee2921f9a4b9b2150ba9f05c5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/27415 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mb/google/octopus/variants/yorp: Enable TBMC deviceFurquan Shaikh
This change enables tablet mode ACPI device for yorp. BUG=b:111264961 CQ-DEPEND=CL:1132686 Change-Id: I81140b84a1adb5b21f1656fd89d953331e538f01 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-12mb/google/octopus: Enable TBMC device only for phaserFurquan Shaikh
Enabling of TBMC device on AP side requires corresponding support on the EC side as well. Since not all octopus variants have tablet mode support enabled, this change enables TBMC device only for phaser. BUG=b:111264961 Change-Id: I1ce181baa8ebaff0a9d767e97ddc256eef9789e8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-12mb/google/octopus/variants/bip: Enable EC SW syncFurquan Shaikh
This change enables EC SW sync for bip by removing GBB flag selection for disabling SW sync. BUG=b:110523189 TEST=Verified that EC SW sync works fine on bip. Change-Id: Iff8ee67fd682530a4fa82643cd1d00a645b347a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mainboard/google/poppy/variants/atlas: config ISH in mainboard sideli feng
To enable ISH device on atlas board, change "device pci 13.0 off end" to "device pci 13.0 on end" in file mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is not needed. Config atlas board specific ISH setting in devicetree.cb. Dynamically load gpio setting for ISH enabled/disabled cases. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mediatek/mt8183: add PLL and clock init supportWeiyi Lu
Add PLL and clock init code. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Checked with frequency meter in SOC. Change-Id: I1f561f66bcf12de6a95c2f64eecd9508bd9bb26c Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/27031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mediatek: Share PLL code among similar SOCsTristan Shieh
Refactor PLL code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I11f044fbef93d4f5f4388368c510958d2b0ae66c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27305 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11google/kukui: Update MMU table in romstage and ramstageTristan Shieh
In order to get better performance, map dram as cached after dram ready in romstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Need a futher check after dram calibration code ready. Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27304 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mediatek/mt8183: Add MMU operation supportTristan Shieh
Enable MMU in bootblock for performance, link common code to provide mtk_mmu_after_dram() to update MMU table in romstage after dram ready, implement mtk_soc_disable_l2c_sram(), and call mtk_mmu_disable_l2c_sram() to turn off L2C sram in ramstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Change-Id: I4e35f8276ca23de7fd13da3515b9f48d944ead32 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mediatek: Share MMU operation code among similar SOCsTristan Shieh
Refactor MMU operation code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mainboard/google/kahlee: Update existing SPD filesMartin Roth
Add an extra space after 8th value on each line to make it easier to count the values. Update the empty spd to remove two random 0x80 values. BUG=None TEST=None Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27423 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mainboard/google/kahlee: Add additional SPDs for variantsMartin Roth
BUG=b:111079089, b:80375243 TEST=Build grunt, verify that SPDs are included. Change-Id: Idb03a3fa0842f7f89bb8c66dedbb8a0b293569be Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27422 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11riscv: add support to check ISA extensionXiang Wang
Add support to check ISA extension for RISC-V. Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-10src/sb/amd/pi/hudson/sd.c: disable SDR50 tuning and set correct clock freq ↵Michał Żygowski
in SD2.0 mode According to BKDG for AMD Family 16h Models 30h-3Fh Processors SDR50 tuning should be disabled in 0xA8 register. Also fix clock frequency setting in 0xA4 for stepping >= A1 which caused reduced performance of SD cards transfer speed even by half. Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-10payloads/Kconfig: Put option *None* at the topPaul Menzel
As *None* is special and not a payload, it makes sense to put it at the top. Also, it was at before the latest addition of the FIT payload choice. Fixes: a892cde6 (lib: Add FIT payload support) Change-Id: I52163ea9472308ecbc396012d9912b9617e0c318 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/27414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-07-10soc/cavium: Add secondary CPU supportPatrick Rudolph
Change-Id: I07428161615bcd3d03a3eea0df2dd813e08c8f66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium/cn81xx: Set cntfrq_el0Patrick Rudolph
Set cntfrq_el0 to provide correct timer frequency. Change-Id: I4b6d0b0cf646a066fc5a51552a1891eccbd91e5e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25450 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10mb/cavium/cn8100_sff_evb: Be verbosePatrick Rudolph
Print some useful information about the board. Change-Id: I0acac7a29290bc2eb9f4283317165fa0cf1b24e1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25449 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10soc/cavium: Clean uart codePatrick Rudolph
* Only init UART_FOR_CONSOLE * Allow UART init with zero baudrate. * Init UART0..3 on Cavium's cn8100_sff_evb to fix kernel panic. Tested on CN8100_SFF_EVB. Change-Id: I1043b30318ec6210e2dd6b7ac313a41171d37f55 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium: Enable MMUPatrick Rudolph
* Configure and enable MMU. * Cover the whole I/O space. * A minimum of 512KB TTB space is required. * Use secure mem attribute as firmware is running in ARM TZ region. Tested on Cavium SoC. Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10cavium: Add CN81xx SoC and eval board supportDavid Hendricks
This adds Cavium CN81xx SoC and SFF EVB files. Code is based off of Cavium's Octeon-TX SDK: https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK BDK coreboot differences: bootblock: - Get rid of BDK header - Add Kconfig for link address - Move CAR setup code into assembly - Move unaligned memory access enable into assembly - Implement custom bootblock entry function - Add CLIB and CSIB blobs romstage: - Use minimal DRAM init only devicetree: - Convert FTD to static C file containing key value pairs Tested on CN81xx: - Boots to payload - Tested with GNU/Linux 4.16.3 - All hardware is usable (after applying additional commits) Implemented in future commits: - Vboot integration - MMU suuport - L2 Cache handling - ATF from external repo - Devicetree patching - Extended DRAM testing - UART init Not working: - Booting a payload - Booting upstream ATF TODO: - Configuration straps Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688 Signed-off-by: David Hendricks <dhendricks@fb.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/23037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-09util/cavium: Add tool to convert devicetree blobsPatrick Rudolph
Convert Cavium's BDK devicetree blob to a static C file. The resulting file must be included in mainboard folder to provide board specific configuration values to BDK functions. Example call: python devicetree_convert.py --in sff8104.dtb --out bdk_devicetree.c Change-Id: I76a5588aefe4f680228eca46a0e4dba7e695931c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26228 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-09src/southbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I72d50615d77b91529810e8f590fa56f3c6f7546c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/soc: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I21680354f33916b7b4d913f51a842b5d6c2ecef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/northbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iaf86a0c91da089b486bd39518e5c8216163bf8ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/mb: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iedc2e48349e40e94863c8080d11e11dbe6084c9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/{ec,include,lib}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{arch,commonlib,cpu}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I8e4118c5c5d70719ad7dc5f9ff9f86d93fa498ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09soc/intel/skylake: config ISH in SOC sideli feng
Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-09ec/lenovo/h8/acpi: Add BDC interfacePatrick Rudolph
* Add SSDT generator to add dynamic ACPI code. * Implement GBDC and SBDC for thinkpad_acpi kernel module. Required for BDC power control from userspace. Tested on Lenovo T430: The bluetooth module is detected and can be powercycled using network manager. Change-Id: Ida825196650966194a883945896a038b0790fe45 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06superio: move files to match the common naming schemeFelix Held
Change-Id: I1a8fc34aaaf42514c8af97ab155ff2712e7a5448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23009 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06util/lint: Update lint-stable-000-license-headers linterMartin Roth
- Update stable directories - Remove duplicated directories There are currently 220 files that still need to have headers added or be excluded from the lint-000-license-headers test. Change-Id: I40046a2fb7359262b130f6813eda1f2c30916b46 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-06src: Add missing license headersMartin Roth
These two files were added before I was able to get the updated linter committed. Updated/Add the headers so the stable header lint check can be updated. Change-Id: I464ddecb5eebe8c5b907f3dcfeab1b06501af6ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-06util/cbfstool/compiler: __attribute redefinitionFrans Hendriks
In Windows Cygwin enviroment, compiler reports redefinition error at cbfstool/ifwitool.c on _packed and __aligned. Skip new defines when vales are already defined. Change-Id: I3af3c6b8fc57eee345afcef2f871b897138f78ce Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/27357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06riscv: use __riscv_atomic to check support A extensionXiang Wang
GCC pre-defined some macros for detecting ISA extensions. We should use these macros to detect ISA features. Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-07-06google/grunt: Update Raydium TS device ACPI nodesKevin Chiu
change I2C irq to EDGE trigger BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot Raydium TS is working. Change-Id: Iff3acf4199d23b29dff209ec1c03a731679c6cbe Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27327 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
This change configures ACPI to properly route notifications from the EC for tablet mode events to userspace. Relevant EC config changes are at: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1125261 BUG=b:111078678 TEST=With EC change, tablet mode detected by evtest and powerd Change-Id: Ifbc318186b195534f647f062544de4968aa87401 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06ec/lenovo/h8/acpi: Move ACPI HKEY device to new filePatrick Rudolph
Move the APCI HKEY device to a new file and include it. The follow-up commits will extend it and this way it remains readable. Change-Id: Ie59b59e5a4148807125c71a362161026f685a97e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/intel/d945gclf/romstage.c: Remove unneeded includesElyes HAOUAS
Change-Id: I3bdb93e51cabbfc14fe992ccdb6556e344e03c2f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-06mb/ibase/mb899: Remove unneeded includesElyes HAOUAS
Change-Id: Iee237206f309409be64307d2daee044da52a05e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 07:18:18 +0000