| Age | Commit message (Collapse) | Author |
|---|
|
Add definitions to describe GPIOs in generated ACPI objects and a
method to write a GpioIo() or GpioInt() descriptor to the SSDT.
ACPI GPIOs have many possible configuration options and a structure
is created to describe it accurately in ACPI terms. There are many
shared descriptor fields between GpioIo() and GpioInt() so the same
function can write both types.
GpioInt shares many properties with ACPI Interrupts and the same types
are re-used here where possible. One addition is that GpioInt can be
configured to trigger on both low and high edge transitions.
One descriptor can describe multiple GPIO pins (limited to 8 in this
implementation) that all share configuration and controller and are
used by the same device scope.
Accurately referring to the GPIO controller that this pin is connected
to requires the SoC/board to implement a function handler for
acpi_gpio_path(), or for the caller to provide this directly as a
string in the acpi_gpio->reference variable.
This will get used by device drivers to describe their resources in
the SSDT. Here is a sample for a Maxim 98357A I2S codec which has a
GPIO for power and channel selection called "sdmode".
chip.h:
struct drivers_generic_max98357a_config {
struct acpi_gpio sdmode_gpio;
};
max98357a.c:
void acpi_fill_ssdt_generator(struct device *dev) {
struct drivers_generic_max98357a_config *config = dev->chip_info;
...
acpi_device_write_gpio(&config->sdmode_gpio);
...
}
devicetree.cb:
device pci 1f.3 on
chip drivers/generic/max98357a
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPP_C5)"
device generic 0 on end
end
end
SSDT.dsl:
GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0, ResourceConsumer, ,) { 53 }
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ibf5bab9c4bf6f21252373fb013e78f872550b167
Reviewed-on: https://review.coreboot.org/14934
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add definitions for ACPI device extended interrupts and a method to
write an Interrupt() descriptor to the SSDT output stream.
Interrupts are often tied together with other resources and some
configuration items are shared (though not always compatibly) with
other constructs like GPIOs and GPEs.
These will get used by device drivers to write _CRS sections for
devices into the SSDT. One usage is to include a "struct acpi_irq"
inside a config struct for a device so it can be initialized based
on settings in devicetree.
Example usage:
chip.h:
struct drivers_i2c_generic_config {
struct acpi_irq irq;
};
generic.c:
void acpi_fill_ssdt_generator(struct device *dev) {
struct drivers_i2c_generic_config *config = dev->chip_info;
...
acpi_device_write_interrupt(&config->irq);
...
}
devicetree.cb:
device pci 15.0 on
chip drivers/i2c/generic
register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end
SSDT.dsl:
Interrupt (ResourceConsumer, Edge, ActiveLow, Exclusive,,,) { 31 }
Change-Id: I3b64170cc2ebac178e7a17df479eda7670a42703
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Depending on which options are selected there needs to be certain
functions supplied. However, the spi, mmap_boot, and tsc_freq modules
were not included in the SMM builds. Fix the omission.
Change-Id: I25ab42886cfd46770ce0f4beee65f2f4d15649f3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14977
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
An updated descriptor expands the BIOS region while descreasing
the 'device expansion region' utilized by the CSE. Update the
end region marker to reflect this new size as well as the
chromeos.fmd file which needs to be adjusted for logical boot
parition 2 requirement which resides halfway through the BIOS
region. The GBB was moved and shunk to accommodate the change.
Change-Id: I7baa5282d7c608af648b5773c4dfa123060a6e45
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14974
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
CQ-DEPEND=CL:347460
BUG=chrome-os-partner:53689
BRANCH=None
TEST="emerge-reef chromeos-bootimage" completes without error
Change-Id: Ic954e29628423937604772a8d2d0414954e6ba3e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/347441
Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/14975
Tested-by: build bot (Jenkins)
|
|
The chromeos.c suport needs to be linked into verstage so it will
link.
Change-Id: If85e232a3721443edfbbd278b32f72302f13f3a8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14973
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There previously was no support for building verstage on apollolake.
Add that suport by linking in the appropriate modules as well as
providing vboot_platform_is_resuming(). The link address for verstage
is the same as FSP-M because they would never be in CAR along side
each other. Additionally, program the ACPI I/O BAR and enable decoding
so sleep state can be determined for early firmware verification.
Change-Id: I1a0baab342ac55fd82dbed476abe0063787e3491
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14972
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When CONFIG_C_ENVIRONMENT_BOOTBLOCK is employed there's no need for
a chipset specific verstage entry point because cache-as-ram has
already been initialized. Therefore, provide a default entry point
for verstage in that environment.
Change-Id: Idd8f45bd58d3e5b251d1e38cca7ae794b8b77a28
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14971
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Iba506054a3d631c8e538d44e1ca6877dd02c2ca9
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14956
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I9931263f0f51d6c726bd7c72042fae1155affb6e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14963
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=none
TEST=Boot to OS and verfiy if rtc0 device is created
under /sys/class/rtc/
Change-Id: Idec569255859816fda467bb42a215c00f7c0e16e
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since fit.c is the only caller of this function move it out of common.c
and into fit.c.
Change-Id: I64cc31a6d89ee425c5b07745ea5ca9437e2f3fcf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14949
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
By design, FSP will send POST codes to port 80. In this case we have
both coreboot and FSP pushing post codes, which may make debugging
harder. In order to get a clear picture of where FSP execution begins
and ends, send post codes before and after any call to the FSP blobs.
Note that sending a post code both before and after is mostly useful
on chromeec enabled boards, where the EC console will provide a
historic list of post codes.
Change-Id: Icfd22b4f6d9e91b01138f97efd711d9204028eb1
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14951
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The previous code harded the suffix of splash file as
"jpg". Actually, SeaBIOS supports both jpg and bmp.
Change-Id: I06c4b14aae7f75be3406652a94612b5f30ce91c2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/14932
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The NB_DEV_ROOT macro, is almost unreadable, as it depends on other
stringified macros, and acts differently depending on the coreboot
stage. For ramstage, it also hides a function call.
Rewrite the macro in terms of more basic and readable macros.
Change-Id: I9b7071d67c8d58926e9b01fadaa239db1120448c
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14890
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
memmap.c functionality is designed to be used in more than ramstage.
Therefore, it cannot use ramstage-specific APIs. In this case, the
SIMPLE_DEVICE API offers a more consistent behavior across stages.
Change-Id: Ic381fe1eb773fb0a5fb5887eb67d2228d2f0817d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Configure GPIO_199 and GPIO_200 as NF2 to work as HPD.
2. Make 20k Pullup and remove duplicate code.
Change-Id: I8c78d867b03d5f2a6f02165c20777ae25e352ce7
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/14899
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Providing an option to enable or disable ISH interface. Leaving it
disabled for now.
Change-Id: Id4e71d60a6c2da6c6c070d41f66f6c161de38595
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14895
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Also initialize IshEnable in Silicon Init UPD with the value from
devicetree.cb
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I8f57a7353471cc3efa21c7011cdd0b369d25275d
Reviewed-on: https://review.coreboot.org/14894
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for chip NCT6102D / NCT6106D in superiotool
Change-Id: I689ff8e796f43a5aac144e9898df750407588b1f
Signed-off-by: Roberto Muñoz Gómez <munoz.roberto@gmail.com>
Reviewed-on: https://review.coreboot.org/14206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Increase BIOS region size by 512KB since device extension size
is reduced from 1MB to 512KB
BUG=chrome-os-partner:52589
TEST=Build Coreboot and boots
CQ-DEPEND=CL:*259448,CL:345642,CL:*259445
Change-Id: Ib81b117a3afe730aafa54b4ef31b1e9ab1f67111
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14929
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ib0b30a5779681488e80000a2570fc2fd4c69e908
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14893
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add SMI handlers that map to SOC specific SMI events
Update relocation_handler in mp_ops
Change-Id: Idefddaf41cf28240f5f8172b00462a7f893889e7
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14808
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide default handler for some SMI events. Provide the framework for
extracting data from SMM Save State area for processors with SMM revision
30100 and 30101.
The SOC specific code should initialize southbridge_smi with event
handlers. For SMM Save state handling, SOC code should implement
get_smm_save_state_ops which initializes the SOC specific ops for SMM Save
State handling.
Change-Id: I0aefb6dbb2b1cac5961f9e43f4752b5929235df3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14615
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When the vboot cbfs selection runs in postcar stage it should be
utilizing cbmem to locate the vboot selected region.
Change-Id: I027ba19438468bd690d74ae55007393f051fde42
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14959
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The current code was using !__PRE_RAM__ as a proxy for ramstage
conditional compilation. In the face of postcar stage not defining
__PRE_RAM__ (because it's after RAM is up) these code paths
can fail to compile with a __SIMPLE_DEVICE__ defined for the entire
stage. Remedy the current situation by just compiling explicity for
ramstage because that was the original intent. In the future,
the __SIMPLE_DEVICE__ selection for postcar can also be re-evaluated.
Change-Id: I0f887f1e45f0cf5c235ae5144eaa227921e7119b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14958
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Turn on the USB device port.
TEST=Build and run on Galileo Gen2
Change-Id: Ic1fbb2cd51414ce927f2b408ccd27c7edf978744
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add initialization for the USB device port.
TEST=Build and run on Galileo Gen2
Change-Id: Icf83747f778f6e1ac976cd448a94311030e79e4f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14941
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some exceptions (like from calling a NULL function pointer) are easier
to narrow down with a dump of the call stack. Let's take a page out of
ARM32's book and add that feature to ARM64 as well. Also change the
output format to two register columns, to make it easier to fit a whole
exception dump on one screen.
Applying to both coreboot and libpayload and syncing the output format
between both back up.
Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14931
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Elan trackpad needs greater sda hold time.
Configure IC_SDA_HOLD register to increase
the i2c sda hold time by 0.3us.
Change-Id: I3d966eed62a059ecb6a0a88e9f4e6b4ba7a925e4
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14922
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add cmos init helper function.
This function saves the Vboot NV data, calls cmos init
and restores the Vboot NV data.
Change-Id: I8475f23d849fb5b5a2d16738b4d5e99f112883da
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Move the EHCI errata from QuarkFSP into coreboot.
TEST=Build and run on Galileo Gen2
Change-Id: I424ffd81643fbba9c820b5a8a6809b9412965f8d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14940
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Rename usb.c to ehci.c since it contains EHCI specific content.
TEST=Build and run on Galileo Gen2
Change-Id: Ifdb7cd937b1dffda1959b76e1c911ffd93f53cb6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14939
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Switch from using uart_dev to uart_bdf to better describe the value
in use.
TEST=Build and run on Galileo Gen2
Change-Id: If5066b93ea8ccce4a5b89ee3984c7413d5358e71
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14938
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
On apollolake the boot media layout is different in that the
traditional "BIOS" region contains another data structure with
the boot assets such as CSE firmware, PMC microcode,
CPU microcode, and boot firmware to name a few. There's also a
sort of recovery mechanism where there is a second data structure
with similar contents halfway through the "BIOS" region. This
second structure is referred as the logical boot partition 2 (LBP2),
and it's optionally employed.
Add support for writing the LBP2 to a specified FMAP region to
accommodate platforms which require it.
Change-Id: I1959a790f763b409238dea6b62408b42122e590e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14924
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
This fixes compilation of coreboot on Glados
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BRANCH=none
TEST=emerge-glados coreboot works again
BUG=none
Change-Id: Ibaae68192a3dc070c6ecf79223da4a1e1f18b352
Reviewed-on: https://chromium-review.googlesource.com/346198
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: Luigi Semenzato <semenzato@chromium.org>
(cherry picked from commit d7c2c72698e81b1410f9839c77be2e77b8ed83d6)
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14930
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Duncan Laurie <dlaurie@google.com>
|
|
Add a handler for soc/intel/apollolake to return the ACPI path for
GPIOs. There are 4 GPIO "communities" on apollolake that each have a
different ACPI device so return the appropriate name for the different
communities.
Change-Id: I596c178b7813ac6aaeb4f2685bb916f5b78e049b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14859
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a handler for the Intel Skylake SOC to return the ACPI path for
GPIOs. Since all GPIOs are handled by the same controller they all
have the same ACPI path and this is a simple handler that just returns
a pointer to the GPIO device that is defined in the DSDT.
Change-Id: I24ff3a6f2479d9e7eeace65d49e2f6c2e070f3e9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14843
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a new function "gpio_acpi_path()" that can be implemented by
SoC/board code to provide a mapping from a "gpio_t" pin to a
controller by returning the ACPI path for the controller that owns
this particular GPIO.
This is implemented separately from the "acpi_name" handler as many
SOCs do not have a specific device that handles GPIOs (or may have
many devices and the only way to know which is the opaque gpio_t)
and the current GPIO library does not have any association with the
device tree.
If not implemented (many SoCs do not implement the GPIO library
abstraction at all in coreboot) then the default handler will return
NULL and the caller knows it cannot determine this reliably.
Change-Id: Iaa0ff6c8c058f00cddf0909c4b7405a0660d4cfb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14842
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a global ACPI device name handler for the Skylake SOC that will
translate skylake device paths into an ACPI path that matches the
device objects delcared in the DSDT at soc/intel/skylake/acpi/*.
The skylake implementation uses a global acpi_name handler for the
SOC and it is not necessary to add a function to every device.
This function is used by device drivers calling acpi_device_name()
and acpi_device_path() to generate ACPI AML in the SSDT.
Change-Id: I31cecf7905a51224e7bfc40c6c4ad2487f039097
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14841
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a function to "struct device_operations" to return the ACPI name
for the device, and helper functions to find this name (either from
the device or its parent) and to build a fully qualified ACPI path
from the root device.
This addition will allow device drivers to generate their ACPI AML in
the SSDT at boot, with customization supplied by devicetree.cb,
instead of needing custom DSDT ASL for every mainboard.
The root device acpi_name is defined as "\\_SB" and is used to start
the path when building a fully qualified name.
This requires SOC support to provide handlers for returning the ACPI
name for devices that it owns, and those names must match the objects
declared in the DSDT. The handler can be done either in each device
driver or with a global handler for the entire SOC.
Simplified example of how this can be used for an i2c device declared
in devicetree.cb with:
chip soc/intel/skylake # "\_SB" (from root device)
device domain 0 on # "PCI0"
device pci 19.2 on # "I2C4"
chip drivers/i2c/test0
device i2c 1a.0 on end # "TST0"
end
end
end
end
And basic SSDT generating code in the device driver:
acpigen_write_scope(acpi_device_scope(dev));
acpigen_write_device(acpi_device_name(dev));
acpigen_write_string("_HID", "TEST0000");
acpigen_write_byte("_UID", 0);
acpigen_pop_len(); /* device */
acpigen_pop_len(); /* scope */
Will produce this ACPI code:
Scope (\_SB.PCI0.I2C4) {
Device (TST0) {
Name (_HID, "TEST0000")
Name (_UID, 0)
}
}
Change-Id: Ie149595aeab96266fa5f006e7934339f0119ac54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14840
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
acpigen_write_uuid() will generate a ToUUID() 128-bit buffer object for a
common universally unique identifier that is passed as a string. The
resulting buffer is the UUID in byte format with a specific order of the
bytes as described in the ACPI specification:
ToUUID (uuid)
Compiles to:
Buffer (16) { uuid[3], uuid[2], uuid[1], uuid[0], uuid[5], uuid[4],
uuid[7], uuid[6], uuid[8], uuid[9], uuid[10], uuid[11],
uuid[12], uuid[13], uuid[14], uuid[15] }
Change-Id: Ibbeff926883532dd78477aaa2d26ffffb6ef30c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14838
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This function will turn a string of ASCII hex characters into an array
of bytes. It will ignore any non-ASCII-hex characters in the input
string and decode up to len bytes of data from it.
This can be used for turning MAC addresses or UUID strings into binary
for storage or further processing.
Sample usage:
uint8_t buf[6];
hexstrtobin("00:0e:c6:81:72:01", buf, sizeof(buf));
acpigen_emit_stream(buf, sizeof(buf));
Change-Id: I2de9bd28ae8c42cdca09eec11a3bba497a52988c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14837
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Certain mainboards, e.g. the ASUS KGPE-D16/KCMA-D8, require
board-specific configuration changes to the SuperIO. Expose
the functions needed to enter and exit configuration mode
on Winbond devices.
Change-Id: Ic86651872ecafcfe1398201be2b0768bbe460975
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14891
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The src/acpi/Kconfig was being sourced close to the top of the Kconfig
tree, which doesn't allow it to be overridden by mainboards or chipsets.
Moving it lower in the tree allows for the defaults to be overridden.
Change-Id: I0b100f5535c5f383e8c6db74d0024c5ff2e8c08d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14878
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Since FSP-M is run in CAR (as opposed to XIP), its default link
address may need to be changed. Since cbfstool can relocate FSP
blobs, take advantage of that feature.
Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14866
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Idcfaba08e4705c6219a46dd615ae8b456a8ab5b4
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14865
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Follow the convention used on all other platforms and explicitly call
console_init() before any printk(). This call was most likely ommitted
by accident during rebase.
Also remove the "Starting romstage..." message, as console_init() will
print a standardized message. I don't have details on how this message
originally appeared.
Change-Id: Id91f0fc15ecbd3635d67a261907f4c6af9a499ab
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14864
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have a timestamp from before cache-as-ram setup saved in the MMX
registers. Recover that timestamp, and use it as the base timestamp
rather than letting lib/bootblock.c use a late timestamp.
This allows more accurate profiling of the boot flow, since CAR setup
time is no longer excluded from the timing information.
Change-Id: I055092c600438c5260ab67509434a38f1eb77fe4
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14863
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is useful, for example, in the bootblock, when a timestamp is
available which predates the call to main() in lib/bootblock.c
Change-Id: I17bb0add9f2d8721504b2e534dd6904d1201989c
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14862
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
timestamp_cache_get() would call timestamp_cache_init() whenever it
found a timestamp cache in the TIMESTAMP_CACHE_UNINITIALIZED state.
That means that timestamp_cache_get() will never reurn a cache in the
uninitialized state.
However, timestamp_init() checks against the uninitialized state, as
it does not expect timestamp_cache_get() to perform any initialization.
As a result, the conditional branch can never be reached.
Simply remove the timestamp_cache_init() call from timestamp_cache_get().
Change-Id: I573ffbf948b69948a3b383fa3bc94382f205b8f8
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14861
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
timestamp.c was not included in bootblock and postcar. This means that
these two stages would use the weak implementation in lib/timestamp.c
instead of the arch-specific implementation based on rdtsc.
This resulted in using timer_monotonic_get() which resets the
timestamps from 0. timer_monotonic_get() only provides per-stage
incrementing semantics on x86 because lapic implementation has
counting down values. A globally incrementing counter like rdtsc
provides the semantics like every other non-x86.
On the test configuration, the weak implementation of timestamp_get()
returned zero, resulting in wrong timestamps coming from the bootblock,
while romstage and ramstage used the arch implementation and returned
correct timestamps.
This is a great example of why weak functions are dangerous, and how
easy it is to miss subtle yet strong interactions between subsystems
and the coreboot buildsystem.
Change-Id: I656f9bd58a6fc179d9dbbc496c5b684ea9288eb5
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14860
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The timer emulation works by deriving a frequency based off the
Common Timer Copy with a frequency of 19.2MHz.
The desired frequency = (19.2MHz * multiplier) >> 32;
With that knowledge update the code to let the compiler perform
the necessary math based on target frequency.
Change-Id: I716c7980f0456a7c6072bbaaddd6b7fcd8cd5b37
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14889
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The print of size_t can pass upstream jenkins, but fails with CROS_SDK
enviornment, "%z" fits for size_t anyway.
Change-Id: Ic8dbab240463f2e484b73d55e21985fae2b0d9b7
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14835
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I467c56ffc632f58338cb3dbafade15acab5ee016
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14540
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If booting from sdcard/usb, kernel can't recognize the
/dev/mmcblk0.
Before kernel find it's root cause, we add this workaround
patch to enable clk for emmc.
BRANCH=none
BUG=chrome-os-partner:52873
TEST=boot from sdcard and check the /dev/mmcblk0 exists
Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85
Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341632
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14856
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz,
that is GPLL(594MHz) divided by 3.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard
TEST=LoadKernel faster, more than twice as I measured manually.
Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2
Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/339152
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14855
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Allow EC to send an interrupt using ACPI SMI when a MKBP event
is available. This will be used by the sensor stack.
Update all ACPI branch except those without sensors with:
for i in $(find . -name ec.h -exec grep -l MAINBOARD_EC_SCI_EVENTS {} \+
| cut -d '/' -f 2 | grep -v -e cyan -e lars); do
echo $i
cd $i
git diff ../lars/ec.h | patch -p 5
cd -
done
BUG=b:27849483
BRANCH=none
TEST=Compile on Samus. Tested in Cyan branch.
Change-Id: I4766d1d56c3b075bb2990b6d6f59b28c91415776
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: d3b9f76a26397ff619f630c5e3d043a7be1a5890
Original-Change-Id: I56c46ee17baee109b9b778982ab35542084cbd69
Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14854
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
For proper interface operation the drive strength on all pins is set
to 8 mA and all pull ups/pull downs disabled, this matches the current
kernel configuration.
BRANCH=none
BUG=chrome-os-partner:53257
TEST=it is possible to boot Chrome OS on Gru from various micro SD
cards which were failing to boot before.
Change-Id: Ie43e52a52cd0513d48d0ecc8ac02fbb100baf9a4
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 6bb0549ed728ac3c5faab6cbe16e2487400e67ed
Original-Change-Id: I5180537d3ceb74a9a2f7b3982ca94d3e2daf0369
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/344491
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14853
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The code needs to be able to set drive strength for the pins used for
SDMMC0 interface. This patch adds the definitions for the two
registers, as per page 378 of the RK3399 TRM Part 1.
Instead of calculation of the reserved range size just use known
offsets of the registers included in the structure.
BRANCH=none
BUG=chrome-os-partner:53257
TEST=with the upcoming driver change it is possible to boot chrome OS
on Gru from various micro SD cards which were failing before.
Change-Id: I63bf37432ec7f3bdf7e9c6a79d51c31de122dae9
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: c6d6dc5e5e6cc81c173603d4eb21ae803a47815d
Original-Change-Id: Ibe7584e77b446435ab1264dcf8fc8bfe0c50438e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/344490
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14852
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The only outlier at this time is Kevin rev 0, treat it specially, the
rest of the targets use the same GPIO.
BRANCH=none
BUG=none
TEST=gru still boots off SD card just fine
Change-Id: Ic603093a990d27166b16175db3303f155b4775aa
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 5788c5add1d1f803e7b22fb53215b6003ac04d03
Original-Change-Id: Ic5183f08dd1119f9588f243bd9e9c080d84687f9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/344151
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14851
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
now we use 4GB sdram on gru board, enable it.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot from kevin board
Change-Id: Icc483a8ba91c5deea85e6e4009a8a132851b1853
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: efa94aee02bedf51d73c91059b06afcbb1320282
Original-Change-Id: I26f77ff4ad9b2aa35ab5ff50f23984796f4f06bc
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342585
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14850
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
improve rk3399 sdram drvier, so we can support DDR3,
and check the cs training result, so we make sdram
work more stable.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot from kevin, do memtester in kernel and pass
Change-Id: I508bf26fb8163bab2d725a91ead929df585e04a7
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 4d83a87c459167145b7260f9af5c0380caddc056
Original-Change-Id: Id385f1343804a829b6589f89f4cfbb6565d41417
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342664
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14849
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
This patch configures clock for tsadc and then
makes it in automatic mode to generate TSHUT when
CPU temperature is higer than 120 degree Celsius.
BRANCH=none
BUG=chrome-os-partner:52382,chrome-os-partner:51537
TEST=Set a lower tshut threshold(45C), run coreboot and check
that coreboot reboot again and again.
Change-Id: I0b070a059d2941f12d31fc3002e78ea083e70b13
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 05107bd6a3430e31db216c247ff0213e12373390
Original-Change-Id: Iffe54d3b09080d0f1ff31e8b3020d69510f07c95
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342797
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/14848
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The tsadc of rk3288 and rk3399 are similar but not enough
to share the same common driver, and we also decide to add a
polarity setting for mainboards on rk3399 tsadc header.
So we'd better split the tsadc header for each SoC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build veyron_jerry
Change-Id: I41f08965e6d7ce16da1754d4d2512c826cf8aff5
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: b36ee54c4146623bcacd83fe7d55a4fc78bae792
Original-Change-Id: I629599f9e30d863cabf764e1372c38f0f39d5480
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342796
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14847
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Let vop aclk sources from CPLL, and vop dclk from NPLL.
The dclk freq is decided by the edid mode pixel_clock which
may require high accuracy like 252750KHz. The pll_para_config()
can calculate the dividers for PLL to output desired clock.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=check display with the other patches
Change-Id: I12cf27d3d1177a8b1c4cfbd7c0be10204e3d3142
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 0f019b055fffebe9ea3928aae1e25b0ad4feef81
Original-Change-Id: Icef58f87041905961772b69c6b8170d5a866a531
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342335
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14846
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
index.html:
* Separate the sections on the main page
* Move the documentation links to the main page
* Add links for FSP 1.0 and 2.0 specifications
* Add link for UEFI specifications
* Add link to MinnowBoard MAX coreboot
fsp1_1.html:
* Use Integration instead of Documentation
SoC/quark.html:
* Move documentation to main page
* Update build instructions for CorebootPayloadPkg
* Remove FatPkg since it is now part of edk2 tree
* Add source location for QuarkFspPkg
* Add build instructions for QuarkFspPkg
TEST=None
Change-Id: I48bd1bf98a6d8bc43bdd3b4c51dfd119a1e0f61b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14882
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Having CFLAGS with -Os disables -falign-function, for
unlucky builds this may delay entry to ramstage by 600ms.
Build the low-level IO functions aligned with -O2 instead.
Change-Id: Ice6781666a0834f1e8e60a0c93048ac8472f27d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14414
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ia4cef7d584e43f1911db2f81d8b86ed406b75aad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14786
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable emulation for ACPI PM1 timer. This is needed by FSP-M
MemoryInit.
Change-Id: I7a441f5f1673e6430697615ae7251da948e77548
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14821
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie528b0ee3d447dcb819ccb7c0f832885da0f4257
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14820
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
As of now FSP-M can not be relocated and it can not be instructed
to use a specific resource for temporary memory. As result coreboot
is forced to use CAR layout dictated by default FSP-M configuration.
Change CAR size to 1MiB, link romstage at such CAR address so it
doesn't overlap with FSP-M's default heap/stack.
Change-Id: I56f78f043099dc835e294dbc081d7506bfad280d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14804
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently, StackBase field doesn't work and changing it from default
value leads to crash.
Change-Id: Id3f3ea9a834d0c04a8381938535109d6a729cca2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14803
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add recipes that insert FSP blobs into CBFS and get rid of
CBFS names hardcoding.
Change-Id: I350abeffc4d23e45e339464d036716ecdb2ba83a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14818
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2d16336513bcd5a0544a6b68b609e40dd7c141fb
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14807
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add helper function that fills OpRegion structure based on
VBT file content and some reasonable defaults.
Change-Id: I9aa8862878cc016a9a684c844ceab390734f3e84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14806
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I8d3d47ca2fc1fc4c10e61c04b941b6378b9c0f80
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14815
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If '-b' isn't passed when adding an FSP file type to CBFS allow
the currently linked address to be used. i.e. don't relocate the
FSP module and just add it to CBFS.
Change-Id: I61fefd962ca9cf8aff7a4ca2bea52341ab41d67b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14839
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add I2C chip initialization for the Galileo boards.
TEST=Build and run on Galileo Gen2
Change-Id: Ib5284d5cd7a67de2f3f98940837ceb2aa69af468
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14829
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the I2C driver.
TEST=Build and run on Galileo Gen2
Change-Id: I53fdac93667a8ffb2c2c8f394334de2dece63d66
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14828
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I274c990e69634ebcb9dd77470cbf1515281de312
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14683
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change Memroy to Memory in comment.
TEST=None
Change-Id: Ic57fcf962be6a302dcd7b52b9256a182577e734b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14881
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set the base address and enable the GPIO and legacy GPIO controllers.
Call the mainboard routine to initialize the GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I06aed5903d6655d2a0948fb544cf9e0db68faa26
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14827
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig to configure coreboot for a specific Galileo board.
Configure the GPIOs for the specific Galileo board.
TEST=Build and run on Galileo Gen2
Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14826
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
strlen(string) was on the "negative" side of the selection operator, the
side where string is NULL.
Change-Id: Ic421a5406ef788c504e30089daeba61a195457ae
Reported-by: Coverity Scan (CID 1355263)
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14867
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
The libpayload CBFS APIs are pretty old and clunky, primarily because of
the way the cbfs_media struct may or may not be passed in and may be
initialized inside the API calls in a way that cannot be passed back out
again. Due to this, the only real CBFS access function we have always
reads a whole file with all metadata, and everything else has to build
on top of that. This makes certain tasks like reading just a file
attribute very inefficient on non-memory-mapped platforms (because you
always have to map the whole file).
This patch isn't going to fix the world, but will allow a bit more
flexibility by bolting a new API on top which uses a struct cbfs_handle
to represent a found but not yet read file. A cbfs_handle contains a
copy of the cbfs_media needed to read the file, so it can be kept and
passed around to read individual parts of it after the initial lookup.
The existing (non-media) legacy API is retained for backwards
compatibility, as is cbfs_file_get_contents() (which is most likely what
more recent payloads would have used, and also a good convenience
wrapper for the most simple use case), but they are now implemented on
top of the new API.
TEST=Booted Oak, made sure that firmware screens and software sync
worked okay.
Change-Id: I269f3979e77ae691ee9d4e1ab564eff6d45b7cbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14810
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Add register access routines for the GPIO and legacy GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I0c023428f4784de9e025279480554b8ed134afca
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14825
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add LPC_DEV and LPC_FUNC symbols
TEST=Build and run on Galileo Gen2
Change-Id: I8485e2671af439f766228d4eaf9677c2ff8ff3f6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace # define with #define
Align the right hand column to prepare for further expansion
TEST=Build and run on Galileo Gen2
Change-Id: Ie4d9fb56d52d7291be5523d31c1d3aa51f94dcd6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Simplify the union references to enable Coverity to properly process
the routine.
Found-by: Coverify CID 1349854
TEST=Build and run on Galileo Gen2
Change-Id: I667b9bc5fcde7f68cb9b4c8fa85601998e5c81ff
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14870
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Coverity does not like the use of for/break, switch to using returns
instead.
Found-by: Coverity CID 1349855
TEST=Build and run on Galileo Gen2
Change-Id: I4e5767b09faefa275dd32d3b76dda063f7c22f6f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Ioh.h from EDK-II to enable easy comparisons between EDK-II and
coreboot implementations.
TEST=Build and run on Galileo Gen2
Change-Id: I9320101a4a2c16ed18f682f3d04623c54afb52fd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14824
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
|
|
Don't allow an array index of 2 to be processed by the code referencing
the array.
Found-by: Coverity CID 1353337
TEST=None
Change-Id: I586ca14416a6e40971f8f6f4066fbdb4908ca688
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14868
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is an initial stab of configuring the reef pads.
Change-Id: I8d8060745af6fbada268c6c6f3492b985ddf9eb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14831
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
|
|
Using a dedicated variable is slightly less readable and makes the code
less consistent, given that other test functions are called directly in
the if statements.
Change-Id: If52b2a4268acb1e2187574d15cc73a0c1d5fe9bb
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14817
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add helper functions for generating some common objects:
acpigen_write_STA(status) will generate a status method that will
indicate the device status as provided:
Method (_STA) { Return (status) }
Full status byte configuration is possible and macros are provided for
the common status bytes used for generated code:
ACPI_STATUS_DEVICE_ALL_OFF = 0x0
ACPI_STATUS_DEVICE_ALL_ON = 0xF
acpigen_write_PRW() will generate a Power Resoruce for Wake that describes
the GPE that will wake a particular device:
Name (_PRW, Package (2) { wake, level }
Change-Id: I10277f0f3820d272d3975abf34b9a8de577782e5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to produce smaller AML and not rely on the caller to size the
output type appropriately add a helper function that will output an
appropriately sized integer.
To complete this also add helper functions for outputting the single
OpCode for Zero and One and Ones.
And finally add "name" variants of the helpers that will output a
complete sequence like "Name (_UID, Zero)".
Change-Id: I7ee4bc0a6347d15b8d49df357845a8bc2e517407
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add helper function to emit a string into the SSDT AML bytestream with a
NULL terminator. Also add a helper function to emit the string OpCode
followed by the string itself.
acpigen_emit_string(string) /* Raw string output */
acpigen_write_string(string) /* OpCode followed by raw string */
Change-Id: I4a3a8728066e0c41d7ad6429fad983e6ae6962fe
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14793
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add helpers for writing word and dword values in acpigen and use them
throughout the file to clean things up:
acpigen_emit_word - write raw word
acpigen_emit_dword - write raw dword
acpigen_write_word - write word opcode and value
Change-Id: Ia758d4dd25d0ae5b31be7d51b33866dddd96a473
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
