summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-01mb/google/eve: Fix interrupt config for audio devicesDuncan Laurie
Use the new PAD_CFG_GPI_INT macro to specify the headset codec interrupt as specifically edge triggered (since it is registered as EDGE_BOTH in the devicetree) in order to prevent the interrupt from firing unexpectedly when the system is resuming. Also change the DSP interrupt to edge triggered since the kernel is registering with IRQF_TRIGGER_RISING in order to prevent an interrupt storm when it asserts. BUG=b:35582164 TEST=manual testing on Eve: 1) ensure the headset codec sends interrupt on insert and remove 2) ensure there is only one interrupt counted when DSP asserts irq Change-Id: I40a8ee667de653e4e70770cd96b6417442c1b0ec Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01mb/google/eve: Set TOUCHSCREEN_STOP_L GPIO to inputDuncan Laurie
Make this pin a GPI as it is supposed to be an input from the touch controller and not driven by the AP. BUG=b:35581264 TEST=check pin state with a scope Change-Id: Ife5f84fcc614255b20e44389279d515a12f5751d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01mb/google/eve: Do not limit memory speed on new SKU 5 boardsDuncan Laurie
Board changes in rev6+ have a fix to VDDQ that should fix the issue that was being seen with this SKU, so only lower the memory speed on older boards. BUG=b:37172778 TEST=memory stress testing on rev6 boards Change-Id: I6d6fe730cabd74af23eab3f02feef9da01a35fd4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01mb/google/eve: Implement EC device events for S3 wakeDuncan Laurie
Add support for waking from and logging device events that originate in the Embedded Controller. As this device uses Deep S3 it relies on the EC to wake the AP from the trackpad and DSP wake sources. BUG=b:30624430 TEST=manual testing on Eve: wake from Deep S3 via trackpad and DSP and verify the event log contains the expected device event. Change-Id: I0d6a9c5bfd4cea85e13446ffaa6fe3dab0db96a2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01ec/google/chromeec: Add support for EC device eventsDuncan Laurie
Add support for the new EC device event interface which is used to report events from devices that are connected behind the EC. This can be used to differentiate wake sources from the EC in the case that the EC has the wake pins from various devices. This can be used in case the AP is unable to directly wake from the device itself, for example when using the Deep S3 state on Intel platforms only a few pins can directly wake the AP. BUG=b:30624430 TEST=build google/* boards that use chrome EC. Feature is used and tested further in a subsequent commit. Change-Id: I5126c6d6ffb6b0ef6e8db8dcd5aec62db925a371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01elog: Update for EC Device EventsDuncan Laurie
Replace the unused "thermal overload" event with the new "device event" and define the first few device events that are supported by the Chromium EC. BUG=b:30624430 TEST=build for google/* mainboards Change-Id: I1f3aeedb87c2aad29a0a67b5c50c29a6961fb45f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01ec/google/chromeec: Sync header with Chromium EC codebaseDuncan Laurie
Update this header from the upstream source so new host commands can be used in coreboot. https://chromium.googlesource.com/chromiumos/platform/ec commit bbb759ceaa843f548f90c35d1668e17c8879bad3 BUG=b:30624430 TEST=build google/* and intel* boards Change-Id: I56c9f891262d8984b6a9a69d96752c2dd6bb2371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01mainboards: Remove unused EC event for thermal overloadDuncan Laurie
The Chrome EC event for "thermal overload" was never implemented and is being repurposed as the EC event mask is out of free bits. Remove this from the boards that were enabling it. BUG=b:36024430 TEST=build coreboot for affected boards Change-Id: I6038389ad73cef8a57aec5041bbb9dea98ed2b6e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-01Makefile: Update clean targetsMartin Roth
- Clean utilities directories on clean & distclean - Have the distclean target clean up after 'what-jenkins-does' Change-Id: I7d25d8234528b19bf36df6845a4500dbe1cbf9a4 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-01riscv: Update the gcc built-in macro __riscv__wxjstz
The architecture is determined by __riscv__ in the LZ4_copy8 function (located in src / commonlib / lz4_wrapper.c). __riscv exists in gcc7.1.1. But __riscv__ does not exist. Change-Id: I38fd41da9afd76c254f0c3d6984579c3790e5792 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/20125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Andrew Waterman <aswaterman@gmail.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-07-01nb/intel/i945/gma.c: Remove redefined "DISPPLANE_BGRX888"Elyes HAOUAS
DISPPLANE_BGRX888 defined in drivers/intel/gma/i915_reg.h included in i915.h file Change-Id: I4e9414f39a29e4eac7e325672ce6520a5654d3bc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-07-01nb/intel/i945/gma.c: Add whitespace around '<<'Elyes HAOUAS
Change-Id: Ic01bbae9acaabaade777db52825aa80d25fc5961 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-06-30mb/siemens/mc_apl1: Set up RTC backup mode to primary cellWerner Zeh
Set RX6110SA RTC backup mode to primary cell. This mode reduces the backup current consumption of the RTC. Change-Id: I7c0c26a0ed5d8f48587acc917f8bb1c5c2b8869a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-30mb/siemens/mc_bdx1: Set up RTC backup mode to primary cellWerner Zeh
The used RTC6110SA has issues to enter backup mode when the power supply decreases too slow when the mainboard is turned off. Switch to backup mode "primary cell" to make sure backup mode will be entered correctly on power-off. In addition set IOCUTEN to minimize the backup current consumption of the RTC. Change-Id: I9733aa9f2981a25f6d42279eff0c4980e5eb5a5a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-30rx6110sa: Add a software reset sequence in case of power lossWerner Zeh
According to the datasheet the RTC needs a power rising slope of no more than 100µs/V to ensure a correct power-on reset. If the mainboard that hosts the RTC cannot guarantee this, a software reset sequence is needed in the case where the battery was drained completely. As the rising slope of the power supply depends on so many parameters and is highly mainboard specific, refactor the initialization code to perform a software reset every time a power loss event is recognized by the RTC. Change-Id: If64d672e51667523058041bd00e1e50ac047143d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-30southbridge/amd: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I8fabb7331435eb518a5c95cb29c4ff5ca98560d2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-06-29lib/spd_bin: Use proper I2C addressesNico Huber
Use the plain address instead of the weird shifted encoding (e.g. if we'd use `0xa0` as address, it's actually `0x50` encoded into a write command). Change-Id: I6febb2e04e1c6de4294dfa37bde16b147a80b7a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-29soc/intel/skylake/Kconfig: Drop useless FSP1.1/2.0 promptsNico Huber
There is no choice, if not leaving it with the default the build will fail. Change-Id: Id91e3ce87f8ced3001fcd2125f8f6781b270f5bc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/intel/cannonlake: Add UART initializationAndrey Petrov
Cannonlake has built-in UART driver as part of LPSS block. However port mapped decoders are in use as well. Change-Id: I9f209bf29c1748c5beea31bc6b31cb07a1e14195 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29arch/x86: update assembly to ensure 16-byte alignment into CAaron Durbin
When the C compiler expects 16-byte alignment of the stack it is at the call instruction. Correct existing call points from assembly to ensure the stacks are aligned to 16 bytes at the call instruction. Change-Id: Icadd7a1f9284e92aecd99c30cb2acb307823682c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-29soc/intel/common/block/gpio: Port gpio code from Apollolake to commonHannah Williams
Change-Id: Ic48401e92103ff0ec278fb69a3d304148a2d79aa Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/intel/cannonlake: Add initial dummy directoryLijian Zhao
Add Cannon Lake SoC boilerplate directory with: * SoC directory * Base Kconfig * Dummy cbmem.c Change-Id: Ie28d8b56a1d1afcf1214ef734a08be6efcc8a931 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-29soc/amd/stoneyridge: Convert monotonic timerMarshall Dawson
Use the TSC for the Stoney Ridge monotonic timer. Modern AMD CPUs have invariant timestamp counters. This patch brings the feature more in line with other devices and allows the use of typical monotonic timer functions. BUG=chrome-os-partner:62578062 Change-Id: I07b05fbc7cdea54a45daac01954284a9fd67e42f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-29util/abuild: Update abuildMartin Roth
- Improve logging - Add location of logfiles to failed board log. - Log when the shared utilities fail to build. - Log passing configs and print count of tested configs that passed. - Disable a couple of shellcheck warnings. - Remove some unused code. Change-Id: Ic2cf1c0a5f123d759aac7ce55092ad71314a8c9d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-29util/lint: Update checkpatch & files to upstream linuxMartin Roth
- Update checkpatch.pl to version 522b837 (checkpatch: warn when formats use %Z and suggest %z) - This update moves the const_struct definitions into an external file. coreboot will want to update this file, but for now I'm just pulling it in directly from the linux tree. - Update spelling.txt used by checkpatch.pl to version 505d308 (scripts/spelling.txt: add "overide" pattern and fix typo instances) - Add better notes where things have been changed for coreboot to make future merges easier. Change-Id: I0ef067874fe7b1d23276a10e63858895d6083f69 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-29mb/siemens/mc_bdx1: Set bus master bit for on-board PCI devicesWerner Zeh
There are up to two on-board PCI devices where bus master has to be enabled in PCI config space. As there is no need for a complete PCI driver for these devices just set the bus master bit in mainboard_final(). In a perfect world that would be the task of the runtime driver which unfortunately don't do that. Change-Id: Ic2896d5e7568a455737af26b14b2c398caae5f72 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-29nb/haswell: set ASLB gnvs to OpRegion ACPI memory addressMatt DeVillier
The ALSB gnvs variable is used to load the OpRegion memory address into the ASLS register on the S3 resume path, and must therefore first be set on the normal boot path. This patch brings Haswell in line with SNB/IVB/Nehalem, which already save the OpRegion address in ASLB. Change-Id: Ie062cbfe7e7f60c2a4e2b9111f6b6da87ced7a39 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-06-28soc/amd/stoneyridge: Revise pci_devs.h fileMarshall Dawson
Now that pci_devs.h is part of soc/ and not used for multiple southbridges: * Remove devices not present in the Stoney Ridge APU * Complete the list to include additional devices besides those in the FCH. BUG=chrome-os-partner:62578372 Change-Id: I1cd2d5e41473f362bbfd28ee93788a292bc33991 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20370 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28soc/amd/stoneyridge: Fix device IDsMarshall Dawson
Update pci_devs.h to the correct IDs for Stoney Ridge. BUG=chrome-os-partner:62578372 Change-Id: Ic1a7fe8d95c34b80e21cc089168732372d9690a3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20200 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28amd/family15h: Add defines for boost and P-stateMarshall Dawson
Add definitions for the P-state 0 MSR and Core Performance Boost Control. BUG=chrome-os-partner:62578062 Change-Id: I0c16dde17f1be41a3310c3ccefe3936aba0e8ec0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28soc/amd/stoneyridge: Enable early cbmemMarshall Dawson
Add a memmap file with a cbmem_top() function. Remove the LATE_CBMEM_INIT, allowing the default of EARLY. Remove calls to the late-only set_top_of_ram() function. Change-Id: I11ad7190031c912642a7312f2fc6f792866288b7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28amd/gardenia: Init cbmem in romstageMarshall Dawson
Change-Id: I6ede71ec660678bb5f77693a9095aa0f198e4e26 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-28src/ec: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: Ic2cdfa08cdae9f698eb2f8fa4c4ae061f1a7d903 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-28src/device: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: I66cde1adcf373889b03f144793c0b4f46d21ca31 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-28device/oprom/yabel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: I82bf68a7ee54ff88f65aacc9eb0dbc30d013aae0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-28cpu/intel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: Ie685bbbb1cbf06d32631ea40ad120b6f45374b2e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-28cpu/amd: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: I9f4155285529ec28e826637a61436478f648704c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-28mainboard/google/fizz: Add audio devicesKevin Cheng
- Describe RT5663 headphone codec in ACPI so it can be enumerated by the OS. - Supply NHLT binaries for RT5663 BUG=b:62872377 TEST=Apply full patch set and UCM, verify basic audio works. Signed-off-by: Kevin Cheng <kevin.cheng@intel.com> Change-Id: I5bbd58b0e660cdf5089e6a6dd35a757ecf8ec076 Reviewed-on: https://review.coreboot.org/20305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-28libpayload: Add mouse cursor driverPatrick Rudolph
Add a driver to handle multiple low level mouse drivers and provide basic cursor acceleration support. Tested on Lenovo T500. Change-Id: Ib7cec736631b8acf81a14d28daa29ff720777b10 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28nb/amdk8/debug.c Fix building with CONFIG_DEBUG_SMBUSArthur Heymans
Problem was introduced by fb2f667da2 "nb/amd/amdk8: Link raminit_f.c" which linked debug.c and was not tested with this option. Change-Id: I8597a6915c65ea783a864110cb23ecb34ea0611b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Swift Geek <swiftgeek@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28util/superiotool: Check for libpci before builingArthur Heymans
Check is adapted from inteltool's Makefile. Change-Id: Ife01ef20d9284cb0a68719757856f9a66a4de452 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28cpu/intel/pineview: Include speedstepArthur Heymans
Needed to generate cpu entries. Change-Id: Ia3f5137c7642bb9f79562cc9d6e6881aca749179 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28northbridge/amd/agesa/*: Add whitespace around '<<'Elyes HAOUAS
Change-Id: I56cb941d07ac48f8209a892ec18af8f5090765f7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28cpu/*: Add whitespace around '<<'Elyes HAOUAS
Change-Id: Id46c0b57bd7c9b954b29537c70254df947690e0b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-28payloads: Add whitespace around '<<'Elyes HAOUAS
Change-Id: I0659f6ec59fb808b4cedf57d60d737c13c250042 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20396 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27clang: Allow initializer overridesStefan Reinauer
In the code we do the following in a number of places to pre-initialize an array with a certain value before overwriting some of the array with other values: u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { [0 ... FCH_INT_TABLE_SIZE-1] = 0x1F, } clang does not like that behavior unless we specify the option -Wno-initializer-overrides. Remove the check for gcc in those places, too, because 1) it would silently change array contents between compilers 2) the check isn't sufficient to determine compilation on clang vs gcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I93cc121b6fec099fcdbd5fd1114c2ff7cbc291dc Reviewed-on: https://review.coreboot.org/20384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27xcompile: silence clang when referencing packed structs' membersPatrick Georgi
clang complains that the access might be unaligned. Yes, we know. Yes, that's exactly what we want. You have _one_ job. Change-Id: I5400f50d8b5b462270c700f7ff90d9d517278e71 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/19659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27sis/sis966: Clean up sata.cStefan Reinauer
Wow, this one is disliked by clang for the empty for() loop, but looking at the file just makes my eyes bleed a little bit. I remember the circumstances under which we let this code go in. It was supposed to save contributions from a vendor, but that never worked out. Just to keep the little chunks down, here's an indent run and some of the cruft removed that doesn't actually contribute to functionality in any way. Change-Id: Ie82166ca82f09c4b66decfde5ad194a2d70b0708 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27commonlib/storage: Zero extend MMC capacityLee Leahy
Fix CID 1376472 detected by coverity. Zero extend the capacity instead of sign extending it. TEST=Build and run on reef Change-Id: I6aac422fb1dacb75e0cc44a94ff1f467ce9f529e Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27xcompile: Also try clang variants under the $triplet-clang schemePatrick Georgi
That seems to be the more reliable way to build clang cross compilers for now. Change-Id: I14fe767d20f91b64e96c909291760bddcd108e5c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/19660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27soc/amd/stoneyridge: Add tseg size to KconfigMarshall Dawson
Add a SMM_TSEG_SIZE symbol that can be used in top of memory calculations. Change-Id: I26f3b06f85f0cf5613656c1d5df55bd9ea4bbbbc Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19750 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27soc/stoneyridge: Remove IDE controllerMarshall Dawson
Remove IDE from the Stoney Ridge source. This APU doesn't have an IDE controller. The support was left over from pi/hudson. BUG=chrome-os-partner:62580062 Change-Id: I7316c113a7464089ccfbea6b6cf69787940b9e97 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/stoneyridge: Remove FCH PCIe supportMarshall Dawson
Remove the pcie.c file. Historically PCIe lanes have been available from the Gfx and/or the FCH. The integrated FCH in this APU has no PCIe available. BUG=chrome-os-partner:62580062 Change-Id: Ie89383dadfaa57c5a6d185e74551ae50ac8d9778 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27soc/amd/stoneyridge: Remove PCIe-PCI bridgeMarshall Dawson
The Stoney Ridge does not contain this bridge like some of the older Hudson FCHs. Remove this support from the source. This moves the Stoney Ridge IRQ setup to the southbridge file, hudson.c. BUG=chrome-os-partner:62580062 Change-Id: I8f974ba76b8c20f4335dd8872eaf4b8172188ee2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/common: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. Some of the lines requiring a >80 break are indented too much currently. Changes to agesawrapper.c cause the build to change, so this file is also left as-is. Make hex values consistently lower-case. BUG=chrome-os-partner:622407746 Change-Id: I0464f0cafac4ee67edc95d377dcf7aab9a90c66b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/amd/stoneyridge: Fix most checkpatch errorsMarshall Dawson
Correct the majority of reported errors and mark most of the remaining ones as todo. (Some of the lines requiring a >80 break are indented too much currently.) Some of the alignment in hudson.h still causes checkpatch errors, but this is intentionally left as-is. Also make other misc. changes, e.g. consistency in lower-case for hex values, using defined values, etc. These changes were confirmed to cause no changes in a Gardenia build. No other improvements were made, e.g. changing to helper functions, or converting functions like __outbyte(). BUG=chrome-os-partner:622407746 Change-Id: I768884a4c4b9505e77f5d6bfde37797520878912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27mainboard/google/soraka: Update VR config settingsRajneesh Bhardwaj
Update Psi2Threshold, IccMax, AcLoadline, DcLoadline VR config settings as per board design. BUG=b:62063434 BRANCH=none TEST=Build and boot soraka. Change-Id: I254bbb88b82ddf278f0ec71bc98873df1d5e0d27 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: G Naveen <naveen.g@intel.com> Reviewed-on: https://review.coreboot.org/20309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27mb/google/soraka: Remove MPS IMVP8 workaroundRajneesh Bhardwaj
Soraka uses MPS2949 IMVP8 controller and does not need the VR workaroud similar to Eve. BUG=None TEST=Build & boot on soraka. Ensure IMVP8 controller goes to low power mode in S3 and S0ix by measuring power. Change-Id: Ib98bb709ecc9e362a5cef437e7319e41f398a73b Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/20255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27nb/intel/fsp_rangeley/port_access.c: Add brackets around macroElyes HAOUAS
Code checked manually Change-Id: Idf86546ddda4fa2b4b96f0b703c03af9931c757d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27libpayload/drivers/usb/ehci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Iee8dc03d5a4ca7537c7da4fed2c67b169c9e2422 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27libpayload/drivers/usb/xhci_private.h: Add parentheses around macroElyes HAOUAS
Change-Id: I0347594e9480dedc4845b6863733a67fc5e47e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20371 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27util/lint: Add check to make sure 'coreboot' is lowercaseMartin Roth
- Excludes certain phrases which can't be changed. - Checks last commit message if code is in a repo. Change-Id: I6b52342488dacc56ef6083db5503507af35d41ac Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20032 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27soc/amd/stoneyridge/acpi: Fix checkpatch errorsMarshall Dawson
Correct the checkpatch errors reported in the asl files and make other stylistic modifications. These changes were confirmed to cause no changes in a Gardenia build. BUG=chrome-os-partner:622407746 Change-Id: Id8b2620d161062c444e493325d83bb158705b76b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27util: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I0a024d82d331c0794fe087e440b4e1924129a13c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27buildgcc: Adapt messages about GNAT and bootstrappingNico Huber
Don't ask for bootstrapping in case of a different host GCC major version. GCC's versioning scheme changed starting with the release of GCC 5. There are no big changes between the versions any more. Instead, show the message when the host GCC's version is below 4. In case GNAT can't be found, ask the user to abort and install it. Also give hints for Ubuntu where the package versions are a little messy (e.g. the meta packages gcc and gnat often point to different versions). In case GNAT is found but is too old (< 4.9), enable bootstrapping by default and tell the user that building will take longer. In all three cases show a timeout to draw the user's attention. v2: Update GNAT check to also look for `gnatbind`. It has to be somewhere in $PATH. Change-Id: I4d9de11d7469e137ede8ad138296d20c0f8ba78f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20332 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27buildgcc: Rename quit() to exit_handler()Nico Huber
"quit" is a signal name. The FreeBSD `sh` interprets trap quit 1 2 3 15 as command to reset all the respective signal handlers, instead of setting quit() as handler. Change-Id: I69b813ab583f15a9dd89a115f7aea66d966f981b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20391 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27vendorcode/amd: Unify Porting.h across all targetsStefan Reinauer
This requires to also unify the calling convention for AGESA functions from AGESA_STATUS (*agesa_func)(UINT32 Func, UINT32 Data, VOID *ConfigPtr) to AGESA_STATUS (*agesa_func)(UINT32 Func, UINTN Data, VOID *ConfigPtr) On systems running 32bit x86 code this will not make a difference as UINTN is uintptr_t which is 32bit on these machines. Change-Id: I095ec2273c18a9fda11712654e290ebc41b27bd9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-06-27soc/intel/common/opregion: Use enum cb_err as return valuePatrick Rudolph
Return CB_SUCCESS and CB_ERR instead of some integer. Preparation to merge intel/soc and intel/nb opregion implementations. Change-Id: Ib99fcfe347b98736979fc82ab3de48bfc6fc7dcd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27nb/intel: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: Id5bc8b75b1fa372f31982b8636f1efa4975b61a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-27coreinfo: Use regular `if` over `#if` for `IS_ENABLED`Nicola Corna
When using the regular `if` construct, the compiler will check the guarded code independently from the condition. Change-Id: I00c5c7ae3720f75aa9415edb94cd2ce76cee8aee Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/intel/quark: We're not Broadwell anymoreStefan Reinauer
... even though the author of the code probably wished he was working on a (much faster) broadwell system instead. Let's fix the header guard to reflect the right SOC. Noteworthy: clang detected that this was wrong. Change-Id: I74c217c0471800f40c31a9ac38ba5396f82cd724 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27northbridge/amd/pi: Arithmetics is not logicStefan Reinauer
It's pretty obvious that the author did not want to use a logical and (&&) here but an arithmetical and (&) Change-Id: Ic1bece86986906b76308bbb46235c22418e27990 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27README: Update requirementsStefan Reinauer
pkg-conf and libssl-dev are needed for abuild to run successfully on all boards. Change-Id: Ic0ca2036751893ac4bd3ff17c53fe518b22b64ad Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27amd/amdfam10: Remove dead codeStefan Reinauer
dual_node is never used in that function. And it is never set correctly either, because the register f3xe8 is never actually read either. Just remove the whole useless construct. Change-Id: If316da89bceae6b162f20e4b632276db2d9ef423 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27drivers/spi: Don't disable non-existent warnings on clangStefan Reinauer
The warning -Wstack-usage= doesn't seem to exist on clang, so trying to disable it makes the compiler unhappy about non-existent pragmas. Catching this on gcc is good enough, so let's disable it for the clang case Change-Id: Ia3716a83ba41743ac1dbe73e70abd170de30d7ab Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27vendorcode/amd: Satisfy clang's bracing requirementsStefan Reinauer
src/vendorcode/amd/agesa/f15/Include/OptionMemoryInstall.h:3688:7: error: suggest braces around initialization of subobject Change-Id: Id086a64205dfffa2d1324993f4164508b57b6993 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27vendorcode/amd: Make compiler intrinsics clang friendlyStefan Reinauer
Change-Id: Ibff31a9960a23f03facbb09e76d6a5d6fbfb5e94 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-27libpayload/drivers/usb/ohci_private.h: Add brackets around macroElyes HAOUAS
Change-Id: Id4892adba161cd08eecde71a011384b6c465b98f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/20372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27mainboard/lenovo/x220: allow to use libgfxinitAlexander Couzens
Change-Id: I8b02596b116c0b164e83e7b02449c547224a50a6 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/20330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27include/device: Add pci ids for Intel CNLLijian Zhao
Change-Id: Ia76c391e04e1e11bd110764902b91ef4ed5e8490 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-27cpu/x86/smm: allow SSE instructions in SMM modulesAaron Durbin
If SSE instructions are enabled in the build assume the SMM modules are compiled with SSE instructions. As such enable the SSE instructions in SMM mode by setting up the cr4 register. In addition, provide a place to save and restore the SSE state in both the relocation handler and permanent handler. Change-Id: Ifa16876b57544919fde88fba5b8f18e4ca286841 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20244 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-27sb/intel/bd82x6x: Fill in acpi_namePatrick Rudolph
Fill in acpi_name to return proper ACPI names. To be used with SSDT generators. The ACPI names have to match those already used in ASL code. By providing the ACPI name it can be retrieved by the acpi_device_name() method and doesn't need to be hardcoded in SSDT generators any more. HDEF is defined in sb/intel/bd82x6x/acpi/audio.asl. LPCB is defined in sb/intel/bd82x6x/acpi/lpc.asl. RP0* is defined in sb/intel/bd82x6x/acpi/pcie.asl. SATA is defined in sb/intel/bd82x6x/acpi/sata.asl. SBUS is defined in sb/intel/bd82x6x/acpi/smbus.asl. EHC? is defined in sb/intel/bd82x6x/acpi/usb.asl. XHC is defined in sb/intel/bd82x6x/acpi/usb.asl. Change-Id: I08611b11c694ee5034bca11cb321915d5c73c2f6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-27nb/intel/sandybridge: Fill in acpi_namePatrick Rudolph
Fill in acpi_name to return proper ACPI names. To be used with SSDT generators. The ACPI names have to match those already used in ASL code. By providing the ACPI name it can be retrieved by the acpi_device_name() method and doesn't need to be hardcoded in SSDT generators any more. GFX0 is used in drivers/intel/gma/acpi/pch.asl. MCHC is used in nb/intel/sandybridge/acpi/hostbridge.asl. Change-Id: I19526e334a9c5435fdb19419a671b86c5f6b2be9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27util/blobtool: add spec files for DDR3 SPDsMartin Roth
Because of how blobtool works, we need different files for the 128 and 256 byte versions. Change-Id: I9a3a532515eaeeb65ae05ce4f7a37c88500c6193 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-273rdparty/chromeec: Update submodule to upstream masterMartin Roth
Update from commit bcffec7fd - reef: Cleanup battery code to commit 9fb10386a - Poppy: Configure camera PMIC to low power mode. Brings in 794 new commits from Jan 2, 2017 to Jun 21, 2017 Change-Id: I864679360bd3b211b6883a662e20812b49aefbba Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27mb/google: Remove ChromeEC builds for auron and rambiMartin Roth
The ChromeEC board directories for auron and rambi have been removed from the latest version of ChromeEC. Remove them here so the submodule can be brought forward. Change-Id: I763d03009f735d3f8aedbeb44788d03714c86102 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-27mainboard/google/poppy: Update world facing camera sensorV Sowmya
Update the world facing camera sensor to OV13858 and also add delay of 5ms after xshutdown rising which indicates system ready status. BUG=b:38326541 BRANCH=none TEST=Build and boot soraka. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I0cd535e6568f104ffaa1092a13667def646df0eb Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-27mainboard/google/poppy: Add clock frequency for camera sensorsV Sowmya
Add clock frequency property into _DSD ACPI object and set it to 19.2MHz for camera sensors. Upstream camera kernel has added a check for clock frequency in sensor probe function and without this property sensor probe fails. BUG=b:38326541 BRANCH=none TEST=Build and boot poppy. Dump and verify that the generated DSDT table has the required entries. Verified that sensor probe is successfull. Change-Id: I147b3c932a33ae034868f7f9b616500d24ca71e3 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/20294 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-06-27util/crossgcc: Fix building gcc 6.3.0 with clangPatrick Georgi
It assumes that __builtin_longjmp takes a void **, which is decidedly distinctive from void *. Change-Id: I1930bb01dd62bd6abf0688b118236db2a9299e40 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/20366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27crossgcc: Fix building with clang++ in the presence of gccPatrick Georgi
Some environments (<grumble>cros_sdk</grumble>) provide gcc as $CC and clang++ as $CXX. The latter needs the higher bracket-depth while the former has no idea what it means, so tell CC and CXX individually. Change-Id: I72b75fb9bb5df3a9b1561ee8821ec43ada29b24f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/20365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27libpayload: corebootfb: Add null check for framebuffer addressDuncan Laurie
If the framebuffer address is zero the corebootfb_init() function should abort and not attempt to use it for video, otherwise it will likely hang. This was tested by booting on a board that does not have a display attached and includes the previous patch to zero the framebuffer structure in the coreboot tables. Change-Id: I53ca2e947a7915cebb31b51e11ac6c310d9d6c55 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-27lib/coreboot_tables: Zero framebuffer structureDuncan Laurie
Zero the framebuffer structure so if it is not filled in (either if no display is present or if there is an error) then it does not provide garbage data to the payload. This was noticed when booting a board without a display attached as the payload wrote to the framebuffer at a random address. With this change the payload can properly handle the case where a display is not attached and not corrupt memory. Change-Id: I8114d88496cd2a4f2e7f07f377fe76f3180a7f40 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-27soc/intel/skylake: storage: Use word access for power state registersDuncan Laurie
In the D0 and D3 ACPI methods use word access to the PME status and control register. This brings the code inline with the Intel reference code and matches how the kernel handles access to this register. BUG=b:35587084 BRANCH=eve TEST=manual stress testing of D0<>D3 transition across multiple devices Change-Id: I53f7465d6ad5da1780a5641ff52056445ebaca8b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-27soc/intel/skylake: storage: Add 2ms delay before exiting D3Duncan Laurie
For the skylake/kabylake generation of PCH there is an ACPI workaround for emmc/sd power state that involves disabling and re-enabling dynamic clock gating after enabling power to the controller, before setting the power state to D0. Under certain conditions we have observed that the controller is not powered and ready by the time the kernel attempts to read the PME control and status register and so the system will hang while attempting to read PCI config register 0x84. To ensure that the controller is ready add a 2ms delay after re-enabling dynamic clock gating and before setting the power state to D0. This issue has been observed on eMMC, but the same workaround exists for the SD card interface so the same delay is added there. BUG=b:35587084 BRANCH=eve TEST=manual stress testing of D0<>D3 transition across many devices shows no hard hang after 2 days. Change-Id: If0f0323cf5437c54c907c332937b5de9dda2d8f6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-273rdparty/blobs: Update submoduleMartin Roth
Update blobs pointer to bring in the AGESA.bin changes for amd/00670F00/FP4 and amd/00670F00/FT4. Change-Id: I739124090e41edaf76210cda6189b2c7545cdf58 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-26libpayload: Enable building libpayload with march=i586Lee Leahy
Add a Kconfig value to enable building libpayload with the 586 compiler. Update the cross compiler script to add the Kconfig value name that is used when libpayload builds. The Quark SOC does not support some of the instructions generated with the 686 compiler (e.g. CMOV). Success occurs when payloads/libpayload/build/config.h indicates that CONFIG_LP_USE_MARCH_586=1. TEST=Build and run on Galileo Gen2. Change-Id: I04907e9a38ee139bae2e8b227821f54614707c25 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26buildgcc: Allow environment to override $CC/$CXXNico Huber
Also check for the presence of the given commands or "gcc", "cc" in this order if $CC is empty. To untangle the given compilers from boostrapped ones, introduce hostcc() and hostcxx() functions that return the respec- tive compilers to be used. Change-Id: Ic947be53eec25331173ac82ed742017ca3fbf83c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-26vendorcode/amd: Drop multiple copies of gcc-intrin.hStefan Reinauer
Change-Id: Ifc6a0638c03fa5f3e1007a844e56dfa6f4c71d7e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-26vendorcode/amd: Unify gcc-intrin.hStefan Reinauer
Most of these functions go unused most of the time, but in order to not keep several copies around, let's make sure we are using the same file everywhere first. Change-Id: Ie121e67f3663410fd2860b7d619e8a679c57caba Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-26libpayload/configs: Add configuration for GalileoLee Leahy
Add the default configuration file for the Galileo board. The Quark SOC requires building libpayload with march=i586. TEST=Build and run on Galileo Gen2 Change-Id: Ifd4b533feacbab6f0d357e13d8cebb64bc1c18c6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 00:06:31 +0000