summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-04-14Add console wrapper for UART driverVadim Bendebury
2015-04-14libpayload: avoid hanging on make junit.xmlPatrick Georgi
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
2015-04-14pistachio: modify timer to account for CPU counter overflowIonela Voinescu
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
2015-04-14arm64: Increase dma region size to 32MiBFurquan Shaikh
2015-04-14tegra132: lock down VPRAaron Durbin
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
2015-04-14libpayload: Add dwc2 usb driverhuang lin
2015-04-14rush: Enable dp displayJimmy Zhang
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
2015-04-14rush: Add dp related parametersJimmy Zhang
2015-04-14arm: Fix checkstack() to use correct stack sizeJulius Werner
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
2015-04-14timestamps: You can never have enough of them!Julius Werner
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
2015-04-14chromeec: Fix printf formatting warningAnatol Pomozov
2015-04-14storm: add ipq8064 blobs to the CBFSVadim Bendebury
2015-04-14ipq8064: use the new utility to build bootblockVadim Bendebury
2015-04-143rdparty: move checkout marker forwardStefan Reinauer
2015-04-13ti/am335x: switch to generic udelayPatrick Georgi
2015-04-13arch/mips: provide proper cache primitivesIonela Voinescu
2015-04-13broadwell: Work around VBIOS framebuffer issueDuncan Laurie
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
2015-04-13rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speedJulius Werner
2015-04-13storm: Fix timer init order problemJulius Werner
2015-04-13ipq806x: copy i2c, qup, and gsbi drivers from depthchargeDaisuke Nojiri
2015-04-13storm: add hard_reset templateDaisuke Nojiri
2015-04-13util/ipqheader: Add utility to create uber-SBL for IPQ8064Vadim Bendebury
2015-04-13mips: disable caches in bootblock startup codeVadim Bendebury
2015-04-13tpm: Only expose base address Kconfig option when enabledPatrick Georgi
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
2015-04-13arm: Redesign mainboard and SoC hooks for bootblockJulius Werner
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rk3288: Increase the delay after DDR reset de-assert to 10us.Dailunxue
2015-04-13t132: Add I2S1 support to funitTom Warren
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
2015-04-13Fix dependency issue in Chrome OS vendor codeStefan Reinauer
2015-04-13spi: support controllers with limited transfer size capabilitiesVadim Bendebury
2015-04-13broadwell: Fix incorrect SATA port map maskWenkai Du
2015-04-13tpm: wait for valid bit to be set in TPM access register before using tpmSourabh Banerjee
2015-04-13vboot: remove vboot_handoff.h from chromeos.hDaisuke Nojiri
2015-04-13vboot2: Fill vboot1 handoff with correct TPM firmware versionJulius Werner
2015-04-13The vboot_reference fwlib2 target has changed to fwlib20Bill Richardson
2015-04-13chromeos: add get_recovery_mode_from_vbnv() to vbnv_flashDavid Hendricks
2015-04-13chromeos: Reverse FMAP signature constant to avoid having it in .rodataJulius Werner
2015-04-13vbnv flash: use proper SPI flash offset for NVRAMVadim Bendebury
2015-04-13chromeos: Move common VBNV offsets to a headerDavid Hendricks
2015-04-13vboot1: Set BEFORE_OPROM_LOAD flag for VbInit()Duncan Laurie
2015-04-13elog: Fix regression that caused elog to omit "System boot" eventJulius Werner
2015-04-13elog: Correct behavior when FMAP section doesn't exist on ChromeOSJulius Werner
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
2015-04-13t132: add RAM repair to cluster 1Yen Lin
2015-04-13vboot1: Fix compilation error with CONFIG_ARCH_ROMSTAGE_ARM64 enabledYidi Lin
2015-04-13broadwell: Enable double self refresh by defaultDuncan Laurie
2015-04-13pistachio: increase the size of romstage to 36KIonela Voinescu
2015-04-13vboot2: use offset to vboot2 work buffer instead of absolute addressDaisuke Nojiri
2015-04-13arch: armv7: Fix cache sync instructions.Deepa Dinamani
2015-04-11hp/pavilion_m6_1035dx/cmos.layout: Remove unused optionsAlexandru Gagniuc
2015-04-10fmap: allocate memory as much as discovered fmap sizeDaisuke Nojiri
2015-04-10rk3288: reset edp after edp clock source selecthuang lin
2015-04-10Add google/veyron_mighty boardKatie Roberts-Hoffman
2015-04-10rockchip: support displayhuang lin
2015-04-10veyron*: select VIRTUAL_DEV_SWITCHDavid Hendricks
2015-04-10veyron: Adapt to new board revisionsJulius Werner
2015-04-10veyron_jerry: Port CPU overshoot preventionJulius Werner
2015-04-10veyron*: sdram_get_ram_code() -> ram_code()David Hendricks
2015-04-10veyron*: use gpio_base2_value() in board_id()David Hendricks
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
2015-04-10veyron_jerry: Remove board ID based assumptionsJulius Werner
2015-04-10veyron: Change eMMC enable pin to be pulled (not driven) highDoug Anderson