aboutsummaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2014-01-06CBMEM: Drop cbmem_base_check()Kyösti Mälkki
2014-01-06CBMEM ACPI: Move resume handlerKyösti Mälkki
2014-01-06usbdebug: Fix hidden menuconfig optionsKyösti Mälkki
2014-01-06MRC cache: determine flash size on runtimeVladimir Serbinenko
2014-01-06nehalem: Simplify smi.c by using __SIMPLE_DEVICE__Vladimir Serbinenko
2014-01-06cpu/cpu.h: Allow compiling with __SIMPLE_DEVICE__Vladimir Serbinenko
2014-01-04X201: Fix native video initVladimir Serbinenko
2014-01-04board-status: fix weekly formatPatrick Georgi
2014-01-04device/Kconfig: Add third person singular s to lacksPaul Menzel
2014-01-03asrock/imb-a180: Configure the 6 COM ports and the keyboardDave Frodin
2014-01-03superio: Uncomment the w83627uhg UART clock source initializationDave Frodin
2014-01-03Add the gizmosphere/gizmo mainboardDave Frodin
2013-12-30AMD K8 (rev F): Move rev F0/F1 workaround to headerKyösti Mälkki
2013-12-30AMD K8 (rev F): Move MEM_TRAIN_SEQ check to northbridgeKyösti Mälkki
2013-12-30AMD K8: Define MEM_TRAIN_SEQ only with K8_REV_F_SUPPORTKyösti Mälkki
2013-12-30AMD K8 (pre-F): Clean platforms without K8_REV_F_SUPPORTKyösti Mälkki
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
2013-12-29via/epia-m700: Drop RAMINIT_SYSINFOKyösti Mälkki
2013-12-29AMD K8: Socket implies K8_REV_F_SUPPORTKyösti Mälkki
2013-12-27via: Write »access« without »m« at endPaul Menzel
2013-12-26AMD AGESA: Drop MEM_TRAIN_SEQKyösti Mälkki
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
2013-12-26vortex86ex: Cleanup earlymtrr.c includeKyösti Mälkki
2013-12-24Remove PCI_ROM_RUN optionVladimir Serbinenko
2013-12-23usbdebug: Add option to disable console for romstageKyösti Mälkki
2013-12-23Coding style: punctuation cleanup [1/2].Idwer Vollering
2013-12-22Fix linking microcode with more than one microcode fileAlexandru Gagniuc
2013-12-22vortex86ex: Change PCI S/B resource reservation functions for more I/O devices.Andrew Wu
2013-12-22buildgcc: defer cleaning up the tree a bitPatrick Georgi
2013-12-21lynxpoint: XHCI: Don't put device in D3 in _PS0 MethodDuncan Laurie
2013-12-21lynxpoint: Fix an issue clearing port change status bitsDuncan Laurie
2013-12-21lynxpoint: XHCI: Advertise D3 as lowest wake stateDuncan Laurie
2013-12-21lynxpoint: Fix issues with XHCI initDuncan Laurie
2013-12-21lynxpoint: Route all USB ports to XHCI in finalize stepDuncan Laurie
2013-12-21lynxpoint: Move USB SMI sleep code to separate USB filesDuncan Laurie
2013-12-21pit: disable LCD FETs before doing any graphics initDavid Hendricks
2013-12-21exynos5420: Assign corect parent PLLsDavid Hendricks
2013-12-21exynos5420: don't assume MPLL for i2c parent clockDavid Hendricks
2013-12-21exynos5420: Set SPLL to 400MHzDavid Hendricks
2013-12-21exynos5420: re-factor clock_get_periph_rate()David Hendricks
2013-12-21exynos5420: add a peripheral clock select --> PLL decoderDavid Hendricks
2013-12-21exynos5420: add CPLL and DPLL to the known list of PLLsDavid Hendricks
2013-12-21exynos5420: correct the PMS value for CPLLDavid Hendricks
2013-12-21exynos5420: Configure the UART pins unconditionallyGabe Black
2013-12-21exynos5250: Implement support to boot with USB A-A firmware uploadJulius Werner
2013-12-21armv7: Allow accessing ACTLR (Auxiliary Control Register)Hung-Te Lin
2013-12-21exynos5420: re-factor the SDMMC GPIO config routinesDavid Hendricks
2013-12-21exynos5420: configure SD_0_CDn as VDDEN for eMMCDavid Hendricks
2013-12-21armv7: Add CPU & MP primitive instructionsHung-Te Lin
2013-12-21exynos5420: init APLL at 1800MHzDavid Hendricks
2013-12-21exynos5xxx: use oscillator clock when changing ARM frequencyDavid Hendricks
2013-12-21exynos5420: set L2ACTLR parameters for A15 coresDavid Hendricks
2013-12-21snow: Set up the i2s0 pins during bootGabe Black
2013-12-21exynos5250: Add a pinmux function to set up i2s bus 0Gabe Black
2013-12-21armv7: add wrappers to read/write L2ACTLRDavid Hendricks
2013-12-21ARM: Don't inject nobits since we actually want to load these bitsGabe Black
2013-12-21ARM: Remove (NOLOAD) from the .car sectionGabe Black
2013-12-21exynos5420: minor correction to CPU frequency printDavid Hendricks
2013-12-21armv7/exynos: Fix and remove memory reset workaroundsHung-Te Lin
2013-12-21Pit: graphicsRonald G. Minnich
2013-12-21kirby is dead. long live the arm pit.Stefan Reinauer
2013-12-21Snow: correctly disable trust zone hardwareRonald G. Minnich
2013-12-21Pit: correctly initialize trust zoneRonald G. Minnich
2013-12-21ARMv7: Fix location of CBMEM console in romstageStefan Reinauer
2013-12-21pit: update PMIC write sequence in romstageDavid Hendricks
2013-12-21exynos5420: update set_cpu_id()David Hendricks
2013-12-21snow: TPS69050 -> TPS65090David Hendricks
2013-12-21kirby: pit: Fix up wakeup_need_resetGabe Black
2013-12-21pit: Get rid of the mostly unnecessary exynos5420.hGabe Black
2013-12-21exynos5250: Add mct_start to the timer init blob in timer_monotonic_getGabe Black
2013-12-21kirby: Clean some cruft from mainboard.cGabe Black
2013-12-21kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.hGabe Black
2013-12-21Add a kirby board which is mostly a copy of pitGabe Black
2013-12-21arm: Remove __image_copy_end from the ARM linker scriptGabe Black
2013-12-21Exynos 5420: Enable dynamic CBMEMStefan Reinauer
2013-12-21Exynos 5250: Enable dynamic CBMEMStefan Reinauer
2013-12-21armv7: Prepare tables code for dynamic CBMEMPatrick Georgi
2013-12-21google/pit: disable SYSMMU for graphicsRonald G. Minnich
2013-12-21max77802: update headerDavid Hendricks
2013-12-21Refactor code containing aux callsFurquan Shaikh
2013-12-21Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flagsFurquan Shaikh
2013-12-21Add cpu transcoder attribute to intel dpFurquan Shaikh
2013-12-21Calculate transcoder flags based on pipe configFurquan Shaikh
2013-12-21Enable CAR migration on Exynos 5250 and 5420Stefan Reinauer
2013-12-21peppy: Set optimal DTLE register valuesShawn Nematbakhsh
2013-12-21lynxpoint: Add configuration option for SATA gen3 DTLE registersShawn Nematbakhsh
2013-12-21haswell: add option to change DqPinsInterleavedStefan Reinauer
2013-12-21wtm2: disable SDcard USB portDuncan Laurie
2013-12-21haswell: Misc updates from 1.6.1 ref codeDuncan Laurie
2013-12-21slippy/falco/peppy: Fix EC wake events in S5Duncan Laurie
2013-12-21Add a specific post code for S3 resume failuresDuncan Laurie
2013-12-21Add Kconfig options to override Subsystem Vendor and Device IDDuncan Laurie
2013-12-21falco: Force enable ASPM on PCIe Root Port 1Duncan Laurie
2013-12-21lynxpoint: Add devicetree config option to force enable ASPMDuncan Laurie
2013-12-21lynxpoint: me: Disable some verbose messagesDuncan Laurie
2013-12-21falco: Disable unused clocksDuncan Laurie
2013-12-21lynxpoint: me: Support ICC clock enables messageDuncan Laurie
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 21:05:20 +0000