summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-18sconfig: Switch to getoptDuncan Laurie
Instead of positional arguments switch sconfig to use getopt and pass the arguments as options in the build system. This will make it easier to add additional options. Change-Id: I431633781e80362e086c000b7108191b5b01aa9d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
GPP_A19 and GPP_A20 are already declared as NC in the baseboard. Change-Id: I02f5751a70b51a197320b865d18da3a4ffeb87f7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45485 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18drivers/genesyslogic/gl9755: Add driver for Genesys Logic GL9755Ben Chuang
The device is a PCIe Gen2 to SD 4.0 card reader controller to be used in the Chromebook. The datasheet name is GL9755S and the revision is 05. The patch sets LTR value. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-18mb/google/volteer/eldrid: Add option to enable WiFi SAR configsMalik_Hsu
This change adds a user selectable option to enable all WiFi SAR configs that apply to volteer BUG=b:168169690 TEST=1. cros-workon-volteer start coreboot-private-files-baseboard-volteer 2. USE="project_eldrid" emerge-volteer chromeos-config coreboot-private-files-baseboard-volteer 3. check wifi_sar-eldrid.hex in coreboot-private/3rdparty/blobs/baseboard-volteer Change-Id: I6b74cd2b34ebb99cc59d456e28fd7ab2399d71d0 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45233 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/rockchip: Port make_idb.py to python3Yilin Yang
BUG=chromium:1023662 TEST=buildbot pass TEST=1. Use python2 script 2. Run `emerge-kevin coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. (time info, git hash changes) Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I04253084ec9b65310c52598b629390051cd2172b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45447 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18superio/nuvoton: Inline `nuvoton_hwm_select_bank`Angel Pons
There's no need to place a single-line function in its own compilation unit, and then guard it behind a Kconfig symbol. This also allows using this function in stages other than ramstage. Change-Id: I103a4ea4cef24844d382854c9358bbb37d229e04 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42130 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18src/include: Add PnP/HWM unset_and_set functionsAngel Pons
RMW (read/modify/write) ops on PnP devices has never been so simple. The semantics also allow the compiler to emit valid warnings if the input parameters would overflow, which are silenced when the cast is placed outside of the function. Change-Id: Ica01211af2a9a00aed98880844a836f6b7957b14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42134 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/exynos: Port *_cksum.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Create a tiny file `in.txt` as input 2. Run `fixed_cksum.py in.txt out.txt 20` with py2 and py3 version, the output is the same 3. Run `variable_cksum.py in.txt out.txt` with py2 and py3 version, the output is the same Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I9428269dfb826a3a95fffef9ea3f7c1a7107ef84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18util/mtkheader: Port gen-bl-img.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Use python2 script 2. Run `emerge-asurada coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I788e7c9b09257142728a0f76df8c2ccc72bf6b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18libpayload: cbgfx: Fix 'equals' counter for Lanczos resamplingYu-Ping Wu
The current initialization of the 'equals' counter is incorrect, so that when 'equals >= SSZ * SSZ', the pixels in the sample array might not be all the same, leading to a wrong pixel value being set in the framebuffer. The 'equals' counter stores the number of latest pixels that were exactly equal. Within the for loop of 'ox', the sample array is updated in a column-based order, and the 'equals' counter is updated accordingly. However, the 'equals' counter is initialized in a row-based order, which causes it to be set too large than it should be. Consider the example where sample[sx][sy] are initially: [X X X A A A] // sy = 0 [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] // sy = SSZ Then, the correct implementation will initialize 'equals' to be 15, with last_equal being B. Suppose all of the remaining pixels are B. Then, at the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or equivalently after 4 more columns of sample are updated, 'equals' will be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see there are still 2 A's in the sample: [B B B B A A] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] Therefore, we must also initialize the 'equals' counter in a column-based order. BUG=b:167739127 TEST=emerge-puff libpayload TEST=Character 'k' is rendered correctly on puff BRANCH=zork Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-17soc/intel/cannonlake: add missing special function padsMichael Niewöhner
The following parameters do nothing else than configuring the corresponding pads to native mode: - DdiPortEdp - DdiPort*Hpd - DdiPort*Ddc - GpioDdp* - SpiGpioAssign - I2c*GpioAssign - SerialIoUartDebugEnable - Gp*GpioAssign - Uart*GpioAssign - GpioEnableHdaLink - AudioLinkDmic* - AudioLinkSsp* - GpioEnableHdaSspMasterClock - AudioLinkSndw* - SmbAlertEnable Add the missing special function gpio pad groups for CNL, to be able to configure them via gpio.h instead having to set various FSP parameters. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: update power limitsJeremy Soller
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: disable PCH DMIC, which is not wiredMichael Niewöhner
The microphone is wired to the audio codec, not to the PCH. Disable the DMIC interface. Change-Id: I4128a694c1a66d3c2c2d1cb831fcca3487160f8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45133 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/cannonlake: rename "RSVD" GPIOs to their correct namesMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I59df09c8fd464e75f918455aa1972765abc51459 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: skip FSP init of UART2Jeremy Soller
This UART is already initialized by coreboot for the console, it does not need to be initialized by the FSP. Tested on lemp9. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7c299fd7cf6fe53d1f500a899a14e63e51ad6266 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-17nb/intel/haswell: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib68d8b88b0d79cb33d42f9e21cfb0e57abae75e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45355 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I143b3c829be44a39e14902255cd4bb13bf02f0c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45354 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/x4x: Clean up TPM-related codeAngel Pons
Perform the read to the TPM base address using <arch/mmio.h> functions. Remove dead variable assignment and rename TPM base address macro. Tested with BUILD_TIMELESS=1. Asus P5QL PRO remains identical. Change-Id: I11d737903c57fce768b760fe717564dae8879ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-17nb/intel/pineview: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I347466f56d3d5fb3793b3a25e4a825c844e50d42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/pineview/iomap.h: Rename to memmap.hAngel Pons
It primarily contains definitions for MMIO windows. Change-Id: I8cd639c8c7d400a5bfd73735113dd27dd6f948e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Do not re-read ME UMA sizeAngel Pons
It has been read twice already, so don't read it a third time. Change-Id: I56ec3a10246f6ebe8074e7b8c164bda6b90eee87 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop some unused function parametersAngel Pons
Some of the HECI functions do not need raminfo at all. Change-Id: If0720fa87e5e18820db77a1b61bcdb42ecc538fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop `heci_bar` field from raminitAngel Pons
This field is only written to, never read. Drop it from raminfo. Also, bump MRC_CACHE_VERSION as the saved data layout has changed. Change-Id: I83d6e69addff996e2f18472d3e1d4f7b9ba974fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/haswell: Clean up register definitionsAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Haswell. Moreover, other register definitions were missing. Although most of them are unused, native platform init may eventually use them. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6b3a47b2af406da6b030d417f14a2f4d394aa9c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45353 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I5e1a02ba2ebf468f0d80b7f1838766280b6b7b22 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45352 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib275f9ad8ca9ff343604c9e8cbb130c74ddad54f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45351 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop `void *` cast in `MCHBAR32`Angel Pons
This changes the binary for the native raminit code path. Tested on Asus P8Z77-V LX2, still boots with native raminit. Change-Id: Ie8f1205a64e5264cb909d67c1dd402c18a6241ad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45350 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17Update amd_blobs submodule to upstream masterMatt Papageorge
Updating from commit id 3bd9078: 2020-08-12 17:03:38 -0600 - (picasso: Update PSP to 0.8.6.7B) to commit id e393a88: 2020-09-16 14:32:50 +0000 - (Update SMU firmware for Picasso, Pollock and Dali) This brings in 1 new commits. Change-Id: I1e317cf6ef4803577e9b353fb3313d001db228d7 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45455 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
This allows us to drop some casts to uintptr_t around the tree. The MCHBAR32 macro still needs a cast to preserve reproducibility. Only the native raminit path needs the cast, the MRC path does not. Tested with BUILD_TIMELESS=1, these boards remain identical: - Lenovo ThinkPad X230 - Dell OptiPlex 9010 - Roda RW11 (with MRC raminit) Change-Id: I8ca1c35e2c1f1b4f0d83bd7bb080b8667dbe3cb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45349 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
RCBA is located in the PCH. Replace all instances with the already-defined `DEFAULT_RCBA` macro, which is equivalent. Change-Id: I4b92737820b126d32da09b69e09675464aa22e31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45348 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/ironlake: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
This macro is unused, and RCBA is located in the PCH. Drop it. Change-Id: Id7c095496360bbe96dc2a36dcc557a1481c02c31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45347 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: move HDA options into devicetreeMichael Niewöhner
Change-Id: Id4fc12896f89739d0ee2a47a42173693921da14e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45132 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/volteer: Select USE_CAR_NEM_ENHANCED_V2 for Tigerlake QS basedShreesh Chhabbi
platforms BUG=b:145958015 TEST= Build Volteer coreboot and boot on Volteer Proto 2 and Delbin. Cq-Depend:chrome-internal-review:3249528 Change-Id: I0ff896424ab23dba43075c44eb9b2c2c480ccbfb Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:165893624, b:168090618 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I31b25be1c9248debf855435c7b688b358e2cd57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45246 Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_type.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_type.h>. Change-Id: I0e479e2abdb6cfb8633840db2222ce5397fe7d55 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45403 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_def.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_def.h>. So remove redundant <device/pnp_def.h> includes. I'll remove also <device/pnp_type.h> in a separate patch. Change-Id: Ib9903ae456c32db4ba346020659c17c27a939e89 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-17soc/amd/picasso: Clean up legacy UART configRob Barnes
Clean up configuration of the legacy UART and add Kconfig options for the mapping between UART and legacy I/O decode. BUG=b:143283592 BUG=b:153675918 TEST=Linux detects an additional legacy serial port for each active MMIO one if PICASSO_UART_LEGACY is selected. BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id08ff6428d4019303ebb6e44e13aba480cf1fde2 Reviewed-on: https://chromium-review.googlesource.com/2037891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-17soc/intel/cannonlake: fix GPIO community numbering in ACPIMichael Niewöhner
This corrects the GPIO community numbers in CNL-LP ACPI code. Change-Id: I9f13a28d3e8f427859570a4d209304ae8444efd9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45209 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/common/block/chip: Refactor chip_get_common_soc_structure()Subrata Banik
Found-by: Klocwork, Pointer soc_config is used uninitialized. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7e2aa4ef23a68a2ec2ba9d55cf890a7f81e3e278 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-17soc/intel/common/block: Add NULL check for 'ctx' pointerSubrata Banik
Found-by: Klocwork, Avoid NULL pointer (ctx) dereference. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I16015b538112e0b125b4a5e145c26263c456953c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45411 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/mediatek/mt8192: Init PLL in bootblockCK Hu
Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If16d244e07d9f369efd991132587a92e38200b45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-17soc/mediatek/mt8192: Add mtcmos init supportWeiyi Lu
Using common mtcmos code to power on audio and display modules in SOC. TEST=Boots correctly on MT8192EVB. Passes the status check at the end of mtcmos_power_on() Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ie7bff831eecfc2b4d315a577f6ff86befc483eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/45394 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
Add dptc interface in devicetree for morphius. Set the STAPM parameters for tablet mode: dptc_enable = 1 dptc_fast_ppt_limit = 24000 dptc_slow_ppt_limit = 20000 dptc_sustained_power_limit = 6000 BUG=b:157943445 BRANCH=zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4dac4b7e5157ad7ad407f42a6fc6b06eefbf3291 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-17ec/google/chromeec: Add dptc interface supportChris Wang
add the dptc interface support when system in tablet mode. In some FP5/FT5 platform, which will have different power or thermal parameters depends on different form factor. BUG=b:157943445 BRANCH=Zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I2be7942132cea474237f531021ad4fd9856b5050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44265 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/amd/picasso: add dptc supportChris Wang
add dptc support for different power parameter on tablet/clamshell mode The BIOS may choose to adjust power and/or thermal parameters at its own discretion. The DPTC interface(DPTCi) ALIB Function adds flexibility by allowing the BIOS to request power state changes independently of specific events. BUG=b:157943445 BRANCH=none TEST=Build.Generated ASL code from SSDT by acipgen_dptci().check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Icae94103f254f8fdb84e6ee0f5404fb09fa97b2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/intel/common/block: Do not die if PRMRR size unsupportedAngel Pons
If a given PRMRR size is not supported, do NOT brick people's devices. We don't do that when PRMRRs aren't even supported anyway. Change-Id: Ib917be873aedbc5e789bb0894fca335b5ee9e2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-09-16region_file_update_data_arr: Modify region_file with array of buffersShelley Chen
Add region_file_update_data_arr, which has the same functionality as region_file_update_data, but accepts mutliple data buffers. This is useful for when we have the mrc_metadata and data in non-contiguous addresses, which is the case when we bypass the storing of mrc_cache data into the cbmem. BUG=b:150502246 BRANCH=None TEST=reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Change-Id: Ia530f7d428b9b07ce3a73e348016038d9daf4c15 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45407 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/amd/picasso/data_fabric: make register number parameter unsignedFelix Held
The register number is always non-negative, so it should be an unsigned type. Change-Id: I6b6df5a41fe58efc53eaa87c01b88426ea8daa6e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/amd/picasso/data_fabric: include types.hFelix Held
data_fabric.c uses types from stdint.h, but doesn't include stdint.h directly, so replace the inclusion of stdbool.h with types.h which includes both stdbool.h and stdint.h. Change-Id: I4c1ea444e50218cf19fc8fff499929336265bd03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2020-09-16xeon_sp/skx: Reorder pci_devs.hMarc Jones
Reorder to be similar to cpx/include/soc/pci_devs.h. We may be able to merge the files in the future. Checked TiogaPass with BUILD_TIMELESS=1 Change-Id: I939707cc9e58e23f053156f40df4c21a6072570b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45220 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16xeon_sp/cpx/pci_devs.h: Remove duplicate definesMarc Jones
Change-Id: I8fc4e07269175eb2f40655b828e340697a9a892a Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45219 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/mediatek: move power status bits under each chipWeiyi Lu
The power status bits of display and audio of MT8192 are different from the bits of MT8173 & MT8183, so move those under each chip. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Iaa211b8db733d8aa52d93af9e507042bf0984d55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-16mb/google/dedede: Replace static Camera ACPI by driver for WDooPandya, Varshit B
This change updates devicetree to enable SSDT generation for world facing camera and user facing camera of Waddledoo. Also reverts DSDT changes related to both the camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Ib7e875d297c04f35d4e980ff33d9a3767d2910ac Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16drivers/intel/mipi_camera: Add compatible field for NVMPandya, Varshit B
Add compatible field for NVM Make PRP0001 as default HID if device type is INTEL_ACPI_CAMERA_NVM Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: Iad7afa7b3170982eb5d6215e766f3e98f7a89213 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-09-16mb/google/dedede/var/madoo: Enable keyboard backlight featureIan Feng
This enables the keyboard backlight feature in ACPI for madoo. BUG=b:167943993 TEST=Verified 'kbd_backlight' shows up in the '/sys/class/leds '. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I11531699cb650b96becae5c1bec9f89c48b6bea0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-16drivers/spi/tpm: Improve error checkingCaveh Jalali
This adds error checking in paths that previously ignored TPM communication errors. We hit this case occasionally during "Checking cr50 for pending updates"; previously we would go down this path and eventually time out using MAX_STATUS_TIMEOUT, which is 2 minutes. Now, we detect the failure and return with an error indication instead of timing out after a long time. The root cause of the communication error is an open issue. BUG=b:168090038 TEST=booted on volteer, observed error handling when "Checking cr50 for pending updates" fails. Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: Ia8a1202000abce1857ee694b06b1478e6b045069 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jes Klinke <jbk@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-16drivers/aspeed/common: Reduce severity of `EDID not found` log messageAngel Pons
Servers often run headless, so a missing EDID isn't a problem. However, we still need to initialize a framebuffer for the BMC's KVM function. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: Ice17bf6fdda0ce34e686dbf8f3a1fa92ba869d7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-16soc/amd/picasso: Convert DDR4 MHz to MT/s correctlyRob Barnes
Memory speed is given as an integer in MHz. In some cases it has an implicit fractional speed, so simply multiplying by 2 is not sufficient. Use method from dram/ddr4.c instead. BUG=b:167155849 TEST=Boot ezkinil, check output of 'mosys memory spd print all' and dmidecode -t17 BRANCH=Zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Icc77c21932c68ee9f0ff0b8e35ae7b1a3732b322 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16device/dram: Add method for converting MHz to MT/sRob Barnes
Add method for converting DDR4 speed in MHz to MT/s. Checks that MHz is within a speed grade range. BUG=b:167155849 TEST=ddr4-test unit test BRANCH=Zork Change-Id: I1433f028afb794fe3e397b03f5bd0565494c8130 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16zork/var/ezkinil: Fix Touchscreen doesn't work on v3.6x rework boardLucas Chen
The gpio90 EN_PWR_TOUCHSCREEN had been set to PAD_GPO(GPIO_90, LOW), but addtional PAD_NC(GPIO_90) cause enable fail. remove it for issue fixed. BRANCH=zork BUG=b:168580357 TEST=Check Touchscreen function work Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: Id94dd63ba51759cebaf17779a5e659dbe0f1807f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45415 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16trogdor: invoke new watchdog function before qclib runsRavi Kumar Bokka
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ia76323c749a9ba71cc752a91c968aeacc11e0093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45212 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16sc7180: report hardware watchdog reset after rebootRavi Kumar Bokka
add WATCHDOG_TOMBSTONE in memlayout.ld Change-Id: I57ece39ff3d49f2bab259cbd92ab039a49323119 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-15soc/amd/stoneyridge/acpi/sb_pci0_fch: remove duplicate I/O rangeFelix Held
This I/O region is already covered by the range declared right above the deleted one. Change-Id: I8b8ff3385bbba8e69101ee2c5a5cb39c8f996b94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15soc/amd/picasso/acpi/sb_pci0_fch: remove duplicate I/O range reservationFelix Held
This I/O region is already covered by the range declared right above the deleted one. TEST=Linux stops complaining about overlapping I/O regions. BRANCH=zork Change-Id: I149fb0dc85bfe721a6b0d81e4e9c197194718876 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45368 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15nb/intel/ironlake/raminit: Work around compiler bugPatrick Rudolph
This fixes commit e1d1fe454cf27d6b1c2ef5625f1cefc1a9c6ec9d initialize 'reply.command'. The compiler now optimized away the final condition, that checks the result of heci message, resulting in a binary that always calls die(). Fix that behaviour by using volatile. Tested on Lenovo T410: Boots again into Linux. Change-Id: I63cffc8812bd22695c01bf57283ca593b12e3d87 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-15soc/intel/alderlake/romstage: Do initial SoC commit till romstageSubrata Banik
List of changes: 1. Add required SoC programming till romstage 2. Include only required headers into include/soc 3. Add SA EDS document number and chapter number 4. Fill required FSP-M UPD to call FSP-M API Change-Id: I4473aed27363c22e92e66cc6770cb55aae83e75c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-15mb/intel/jasperlake_rvp: Fix wrong comments for ECTSubrata Banik
Disable -> Enable Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iccefb02fa9bf9507b9e679b3fba35c5c28d677a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-15acpi: Correct sizes for ACPI data fieldsJason Glenesk
Correct sizes of Count, Type, and Latency data field in _CST object to integer, byte, word, respectively. Correct size of NumEntries data field in _CSD object to integer. BUG=b:155307433 TEST=Boot Morphius and dump SSDT _CST and _CSD objects. Confirm that sizes written conform to ACPI_6_3_May16.pdf ACPI specification. BRANCH=Zork Change-Id: I356b46f2fa787e18442a66280b6545a3b525a08b Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45339 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15soc/intel/common/block/cpu: Fix boot failurePatrick Rudolph
This fixes commit 1b89f5e "Guard options with if-blocks". The code no longer returns if SGX is disabled, but as the PRMRR configuration is missing it runs into die(). Tested on Prodrive Hermes: Boots again into Linux. Change-Id: I6d32ca32b1b53767b2db91305103cd532823a5ca Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-15common/block/pmc: Add a check to program the PchPmPwrCycDurV Sowmya
This patch adds a check to avoid violating the PCH EDS recommendation that the PchPmPwrCycDur will never be smaller than the the SLP_Sx assertion widths. This code was initially added for cannonlake and now moving it to common code since the same check will be used to program the PchPmPwrCycDur for Jasperlake and Tigerlake. Change-Id: Ie7d5f54939c5eb1f885d303f75a04958b9d77f4d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45028 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15mb/google/dedede/var/magolor: Add touch screen devicesRen Kuo
add the magolor touch screen ctrl devices: 1)elan 6915 2)elan 5012 3)raydium RM32680 BUG=b:166711761 BRANCH=None TEST=build firmware and verify the touch functions on DUT Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Icd2963317e858f7d35c937e45cd6f3e556bbb953 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45227 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15mb/google/zork: Fix FPMCU_INT_L configurationFurquan Shaikh
Fingerprint interrupt (FPMCU_INT_L) is level triggered and not edge triggered. Also, we are using GEVENT for wake from fingerprint and not the GPIO IRQ wake. Thus, the irq property exposed in ACPI tables does not need to be set to indicate wake for the IRQ. This change updates GPIO table to configure the pad as level triggered and drops the wake attribute for irq_gpio in overridetree. BUG=b:165612778 BRANCH=zork TEST=Verified that fingerprint still works in S0 and to wake device from S3. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I9007e5b0882ac1a6770db52d651218998f6d750d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-15chromeos: Provide common watchdog reboot support in romstageRavi Kumar Bokka
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I2a1f1411e9d58a0738e0e8057f5b1ad049bf03e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45213 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-15sc7180: clock: Remove unwanted QUPv3 FrequencyTaniya Das
As the UART clock frequency is no longer required by the UART driver, remove the unwated frequency. Tested: Compile and boot up testing. Change-Id: I137682b3ca45481ad34ac8ddb5cd308444f752a7 Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-15sc7180: Remove QcLib specific changes from CB UARTRoja Rani Yarubandi
To achieve 115200 baudrate QcLib reconfigures UART frequency with the lowest supported frequency from QUP clock table. With this console logs were getting corrupted at qclib stage. In ChromeOS coreboot, baudrate is configuarable using Kconfig. QcLib should not assume the baudrate and reconfigure any UART register once after the configuration is done in coreboot. To fix the issue QcLib done the changes to not to reconfigure any UART registers. Hence clock_configure_qup() is not required in coreboot UART driver. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Change-Id: I2531b64eddfa6e877f769af0d17be61f5e4d0c35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-14nb/intel/ironlake: Reserve gap betwen TSEG and BGSMNico Huber
There may be a gap between TSEG and the graphics stolen memory due to the alignment done in `raminit.c`. If we allocate MMIO resources in this range, it misbehaves unpredictably, so reserve it. TEST=Booted Thinkpad X201s, allocated resources are above TOLUD. Change-Id: If305e9751ebf4edc945cf038ed72698f3696e52d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45325 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14nb/intel/ironlake: Use an `index` variable for resourcesNico Huber
Change-Id: Ic587231b57c51db592c1647de138a67c55161e58 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14src/mainboard: Remove unused include <device/pnp_ops.h>Elyes HAOUAS
Change-Id: I278fb20aa176bb09f1ff135fdfd732f0096d3808 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14mb/amd/olivehill/bootblock.c: Add missing <arch/io.h>Elyes HAOUAS
Change-Id: I75ea4fc71cf22e5ad547329db2451342cee528b2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14src/superio: Remove unused <device/pnp_def.h>Elyes HAOUAS
Change-Id: I835e8786b84ec16889fd08f566328bc7a0a60c90 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14src/{device,include}: Use PNP_IDX_EN instead of magic numberElyes HAOUAS
Change-Id: I68590605e261ecaace9f3cea28cfa6ec3b913a8a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14drivers/elog: Remove ELOG_PRERAM configShelley Chen
This change is being done for the following reasons: 1. The CONFIG_ELOG_PRERAM is unused. 2. We need to pull in elog.c into romstage because we are pulling the mrc_cache_stash_data function into romstage. 3. Furquan says that we can rely on the linker to optimize out the unused 4KiB buffer in the early stages of boot, which allows us to get rid of the ELOG_PRERAM config. BUG=b:117884485, b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a -v Change-Id: Id76cabc38e41e9bf79e1580a530c871a4ecef4ec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45303 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14lib/fmap: add ENV_SMM check to setup_preram_cacheJosie Nordrum
Add check in setup_preram_cache to return if ENV_SMM is true. This avoids false warning that post-RAM FMAP is accessed too early caused by ENV_ROMSTAGE_OR_BEFORE evaluation in SMI handler. BUG=b:167321319 BRANCH=None TEST=None Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I3a4c199c42ee556187d6c4277e8793a36e4d493b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-14soc/intel/common/block: Use pci_dev_request_bus_master for BM enablingSubrata Banik
Enabling Bus Master isn't required by the hardware, so we shouldn't need to enable it at all. However, some payloads do not set this bit before attempting DMA transfers, which results in boot failures. Replace static sata_final() implementation for BM enabling with generic pci_dev_request_bus_master() function. This allows the user to control through Kconfig whether Bus Master should be enabled. TEST=Able to boot to OS from SATA device on CML platform. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Icd086184fd6fa9c03c806c857f13fad5a9e78a3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14soc/intel/{cnl,icl,jsl,tgl}: Clean up chip.hSubrata Banik
Removed unused header files in chip.h Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Idb9b1ed23df3dbb9dad4d36651064c21a4d913fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/jasperlake: Clean up iomap.h and systemagent.hSubrata Banik
List of changes: 1. Convert inconsistent white space into tab. 2. Group together all MCHBAR offset macros. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ief13406b0116ce0f0b7472e5b133b3fac06f6e27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/cnl: Add ACPI support for PMC core OS driverMichael Niewöhner
PMC core OS driver (intel_pmc_core.c in linux kernel) provides debug hooks to developers and end users to quickly figure out why their platform is not entering a deeper idle state such as S0ix. Include the common pmc.asl added in commit 957481c. Test: PMC gets detected by Linux kernel module. Change-Id: Ibf7c8ba7449df15c2ca30d23791e17fc878204f2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45318 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14crossgcc: Fix libcpp to address -Wformat-securityMasanori Ogino
On some systems where the system compiler enables `-Wformat-security -Werror=format-security` options by default, building libcpp fails because the code passes a variable directly as a format string. This change addresses this problem by patching the affected code. Tested with the default compiler of Nixpkgs unstable, GCC 9.3.0 with the options described above enabled by default. Signed-off-by: Masanori Ogino <mogino@acm.org> Change-Id: Ibf3c9e79ce10cd400c9f7ea40dd6de1ab81b50e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14util/cbfstool: extend includes in commonlibIdwer Vollering
Certain non-Linux OSes require an include file in different places. Build tested on Linux, FreeBSD. Change-Id: Icd81c2a96c608589ce2ec8f4b883fd4e584776b1 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38648 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14src/include: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ie325541547ea10946f41a8f979d144a06a7e80eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14soc/amd/picasso: Move sd_emmc_config into emmc_config structRaul E Rangel
I plan on adding another eMMC parameter. This refactor keeps the config contained in a single struct. BUG=b:159823235 TEST=Build test Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4b57d651ab44d6c1cad661d620bffd4207dfebd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-14mb/google/delbin: Configure DP_HPD as PAD_NC and disable DdiPortHpdRavi Sarawadi
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Delbin board. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ifdef8ee438276678258b75d2fb70c6dfc7ee0a33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-14mb/google/octopus/variants/fleex: Add G2Touch touchscreen supportJohn Su
BUG=b:167297664 BRANCH=octopus TEST=build fleex, and check touchscreen can work Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I910681c258ff5487830e795a8bd08c66be69b1d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44980 Reviewed-by: Justin TerAvest <teravest@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14soc/amd/picasso: copy local info to transfer bufKangheui Won
We added transfer_info_struct to contain various information about memory region we pass from PSP to x86 in commit 0c12abe462. This should be at the start of transfer region but we only manipulated it as local variable and didn't put data into the region, resulting garbage data for transfer_info when x86 tries to read it. Copy the content of local variable to beginning of _transfer_buffer before requesting transfer to PSP so coreboot on x86 can access it. BUG=b:159220781 BRANCH=zork TEST=check transfer_info_struct is correctly populated on romstage Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I14bc34e6af501240a6f633db3999a7759e88d60b Reviewed-on: https://review.coreboot.org/c/coreboot/+/44751 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14include/superio/hwm5_conf.h: Fix copy-pasted commentsAngel Pons
Comments say `port`, but the actual function signature uses `base`. Change-Id: I28a2f24a9701aec2fb990ca2f38e5f2794e15f0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45226 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/dedede/var/boten: Add audio configurationKarthikeyan Ramasubramanian
Add configuration for ALC5682 headphone jack and ALC1015 speaker amplifier. Also turn on the HDA PCI device. BUG=b:161667665 TEST=Build the boten board and verified the audio functionality. Change-Id: I835db854543e6282c102c86a7073b432fd89d0a5 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44920 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14sb/intel/lynxpoint/acpi: Do not determine PCH type at runtimeAngel Pons
Both PCH types are very different, and mixing the code for both together isn't useful. Make `ISLP` return a constant, so that IASL can fold it. Change-Id: I6222d6661115d444d4dad0217c2d376dc551465c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45048 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14sb/intel/lynxpoint: Do not determine PCH type at runtimeAngel Pons
Both PCH types are very different, and mixing the code for both together isn't useful. First of all, inline `pch_is_lp` to return a constant. This allows the compiler to optimize out unused code, which results in smaller executables. For the Asrock B85M Pro4, it's about 2.5 KiB less. Subsequent commits will further split the southbridge code. Change-Id: Iba904acf64096478d1b76ffd05a076f0203502f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45047 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/ocp/deltalake: Drop redundant `select FSP_CAR`Angel Pons
This is selected by Xeon SP Kconfig already. Change-Id: If1ef7f86b27d7be74912c9ad1f9c1efbda6233e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 02:59:40 +0000