Age | Commit message (Collapse) | Author |
|
Use the devicetree values for type 9 slots.
Tested on Lenovo T520.
Change-Id: I1961d8af2d21f755ff52ad58804ea9b31d2a5b9b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Ignore NONE devices in dev_is_active_bridge that are commonly used to
indicate hotplug capable ports.
Tested on Lenovo T520:
The empty ExpressCard Slot is no longer marked as active bridge.
Change-Id: I23347270aaab17647023969091ce4bcdd41dd57a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Add the new field 'smbios_slot_desc', which takes 2 to 4 arguments.
The field is valid for PCI devices and only compiled if SMBIOS table
generation is enabled.
smbios_slot_desc arguments:
1. slot type
2. slot lenth
3. slot designation (optional)
4. slot data width (optional)
Example:
device pci 1c.1 on
smbios_slot_desc "21" "3" "MINI-PCI-FULL" "8"
end # PCIe Port #2 Integrated Wireless LAN
Tested on Lenovo T520.
Change-Id: If95aae3c322d3da47637613b9a872ba1f7af9080
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
SMM final locks the SPI BAR, which causes flashconsole to hang.
Re-init it like SMM does with CONFIG_SPI_FLASH_SMM.
Change-Id: Ib802d7ee32f1fb0a68a84b0280480dcaefa9831f
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Checking the PrimaryDisplay parameter (added by patch with Change
Id Ie3f9362676105e41c69139a094dbb9e8b865689f) isn`t required. The
display connected to PEG works even if IGD is primary for output
image and at the same time this device is disabled
Tested on Asrock H110M-DVS with NVIDIA GTX 1060 GPU
Payload: tianocore edk2-stable201811-216-g51be9d0
Change-Id: I5615597881a151bb004676d914fbf40874ac1f68
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32615
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DRAM base memory should be calculated even if IGD isn`t defined
in the board device tree
Tested on Asrock H110M-DVS
Change-Id: I3da51473e6c06da803bd969a4a6dff792c18f962
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I704780b6ae7238560dcb72fc027addc1089e0674
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: David Guckian
|
|
Configure and enable GPIO for speaker amp max98357a.
BUG=b:117254418
TEST=Build pass and verified on kukui p1 board
BRANCH=None
Change-Id: I97655702dff402245326d2eff71fae0e336df9f5
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
`pei_data` was a struct with blob parameters from pre-FSP times.
Somehow, it sneaked into upstream FSP1.1 support (probably because
early board ports were written for a different blob). When added
upstream, its usage was already perverted. It was declared at SoC
level but mostly used to pass mainboard data from mainboard code
to itself and FSP data from FSP code to itself. Now that no board/
SoC code uses it anymore, we can finally drop it.
Change-Id: Ib0bc402703188539cf2254bdc395cca9dd32d863
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The SoC specific `struct pei_data` was filled with values that were
never consumed anywhere again. So just merge the used code into
`romstage.c` where it's effectively used.
Change-Id: I499b3cfcdd5400ea132749555d433a2d8a9471a3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The SoC specific `struct pei_data` was filled with values that were
later only consumed by the mainboard code again. Avoid jumping through
this hoop and fill FSP UPDs directly.
Change-Id: I040f4a55b4f4bad3f6072920e5e2eceded4cb9bb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The SoC specific `struct pei_data` was filled with values that were
later only consumed by the mainboard code again. Avoid jumping through
this hoop and fill FSP UPDs directly.
The provided solution locates the SPD data in CBFS again to fill SMBIOS
tables. This is not perfect. OTOH, this code isn't mainboard specific
and doesn't belong here anyway.
Change-Id: Ib6103d5b9550846fe17c926631a013ff80b9598f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
`chip.h` is usually used as devicetree interface.
Change-Id: Ied30927d68927b86758a84ccf3f5fbd8cce632f1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32592
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SoC specific `struct pei_data` was filled with values that were
later only consumed by the mainboard code again. Avoid jumping through
this hoop and fill FSP UPDs directly.
Change-Id: I399dd89f85ccea43fdf90bd895e71324f4b409cc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The SoC specific `struct pei_data` was filled with values that were
later only consumed by the mainboard code again. Avoid jumping through
this hoop and fill FSP UPDs directly.
Change-Id: Ibc013ccea9f83ef29f22fe2da4c0d12096308636
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
These are part of a common concept and not SoC specific.
Change-Id: I9cb218d7825bd06a138f7f5d9e2b68e86077a3ec
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
This reverts commit c4ab50cdde4bfd01ec7509012b105c88bcf4c953.
Reason for revert:
vboot recently was changed so that -Wtype-limits fails, and that
was just brought upstream. Since vboot internals are more likely
to be used elsewhere while -Wtype-limits is less critical, revert
this until vboot is resolved, then bring -Wtype-limits back again.
Change-Id: I9cce10462b9e57189513fa49e11fd27ebe35ba51
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32670
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It was only used locally.
Change-Id: Iaaad760e8ceca62655f5448c30846cf11959e8e1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I5d155df1d589fc8d7462f46e87275bd6efae0a7f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I4515d8d14629741f3bf49e9459d7d57c18d321ce
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() and full_reset() functions.
Change-Id: Ic29fab70cf7f23d49c3eeeb97c984c523f973972
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The MacBook Air 4,2 uses eDP, according to the schematics.
Change-Id: Ifc98eab343fd89b8512e92e01fddf34ef8447d5f
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32606
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 304aa429:
2019-03-12 10:38:56 -0700 - (futility: updater: Unit test for preserving sections using FMAP flags)
to commit id e7edff66:
2019-05-03 07:02:32 -0700 - (vboot: implement DISPLAY_INIT context and SD flag)
This brings in 45 new commits.
Change-Id: I7493e43bddc553f9724de46130ccb4cb44e18573
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Turn off camera power when s0ix for power saving.
BUG=b:129177593
TEST= measure camera power comsumption is 0mV under s0ix
Change-Id: I5a9b7ec1e95cc9931d8d5f2dc1254805c9d0ffed
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
A13 and A15 need to set low before H12 reset. Change
the program sequence for fit HW requirement.
BUG=b:131876963
TEST=boot up and check SD card functional
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I2f1752070f24833aaaab75dea8493caf2ed7f157
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Remove use of deprecated GoogleBinaryBlockHeader struct, and
replace with vb2_gbb_header.
BUG=b:124141368, chromium:954774
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Iee3bd877cb1791a689efdeabda324f43f7d0c6f2
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I2f142cc80692e60eb0f81f57339a247f6ef4a524
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Sunrise Point-LP is used on Skylake and KabyLake platforms,
but the PCH IDs differ.
This commit adds the PCH IDs for Skylake mobile platforms
and renames the Kabylake macros to distinguish them.
Used Intel documents:
- 332995-001EN (I/O datasheet vol. 1)
- 332996-002EN (I/O datasheet vol. 2)
Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: Iba38bda9becba9fcffb51afc4756023659f092ef
Signed-off-by: Max Blau <tripleshiftone@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The file is no longer used by any code. Remove it.
Change-Id: I73f06cac11201dc37218d352ab995cf4f012c36a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Part of this checks whether tolum_base and cbmem_top are the same - however,
cbmem_top hasn't been initialised at the point where this call occurs.
Change the ordering to fix that.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Change-Id: Ib89e0513bdc35c3751a9d4c2a2789a2836046789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Reset GPI Interrupt status and enable registers from ramstage instead of
bootblock so that it applies to devices in field.
BUG=b:130593883
BRANCH=octopus
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add board level s0ix call back. Since some driver doesn't
care _ON/_OFF method. Add a control method for s0ix usage.
BUG=b:129177593
TEST=NA
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I404f388b19355ae89b36d1fb07f9fb4f97eb3b2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
A hook for romstage is already existing but not for ramstage.
It's very useful for debugging as it allows to run code
for testing purposes by the mainboard. Also, it allows to
run configuration code or configure FSP options, which
don't have a devicetree option.
Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Remove the bridge enable step of accessing D14F0x64. This method for
enabling the bridge appears to be last present in the SB700 device.
Beginning in the SB800 (and all FCH, SoC devices), the enable is in
PMxEC[0]. Since the bridge is enabled in bootblock to allow port 80h,
there is no need to maintain it in ramstage.
Correct the device used for misc. configuration of the LPC bridge.
The #defined value removed is 14.0 but the settings are in 14.3.
TEST=Boot Grunt, check console and dmesg for errors and warnings
BUG=b:131862871
Change-Id: I078be974dc3c78c94cb7c0832518f21bac029ff2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Relocate the function to the more appropriate file.
Change-Id: I92a3e8d0461ae228f6c01567db159e2458de5f6b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables -Wtype-limits for the whole repository, which
disallows checking for a condition that must be always true or always
false based on type width (e.g. checking whether an unsigned variable is
negative or whether a 32-bit integer is larger than 4G). This helps
avoid easy to make and hard to find (because they often only affect
error paths) mistakes like
size_t size = fmap_read_area(...);
if (size < 0)
die("If only the compiler could've told me to use ssize_t instead");
Change-Id: I19edabfd092d09dad720e3fc47b44838163bfe25
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32536
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes up all code that would throw a -Wtype-limits warning.
This sometimes involves eliminating unnecessary checks, adding a few odd
but harmless casts or just pragma'ing out the warning for a whole file
-- I tried to find the path of least resistance. I think the overall
benefit of the warning outweighs the occasional weirdness.
Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I can't claim that I really understand what this code does, but it looks
like there are platforms that use code from lib/spd_bin.c without
enabling CONFIG_GENERIC_SPD_BIN. Some functions in that file contain
references to CONFIG_DIMM_MAX, so that option probably shouldn't depend
on CONFIG_GENERIC_SPD_BIN.
Change-Id: I041c52b6bd255e9a9920e5a101165ba5fc5fa6f3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32548
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the Librem 13v3 as a separate board; instead build a
single firmware image for the 13 v2/v3 boards.
Clean up Kconfig options:
- remove entries for 13v3 board
- fold entries into a single line where possible
- remove redundant MAINBOARD_VERSION option (will default to 1.0)
- remove unused microcode length/location (only needed for FSP CAR)
Test: build/boot Librem 13 v2/v3 boards with same image
Change-Id: Ic09b8ec5c576f4c4c48ef30ee3f60a4c2c286cd3
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ib96c317391745fa5afea785e3c7441124b3fc252
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
The {read,write}_index functions expect a 32 bit value, as
do the bitwise operations.
Found-by: Coverity Scan #1229584
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Idc2bc46c899d5a4e8b089644dca076a88d97dd7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
cpu_microcode_bins is commented out.
Remove this line.
BUG=NA
TEST=Portwell PQ7-M107
Change-Id: Ic398d232bea84a765fce940ef876916a873e561f
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32510
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added IDs for:
- H170
- Z170
- Q170
- Q150
- B150
Used documents:
- 332690-005EN
Tested on Gigabyte GA-Z170N-WIFI
Change-Id: If20a2b764afa02785a97948893dbc5b5f60aff60
Signed-off-by: Marius Genheimer <mail@f0wl.cc>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32517
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make use of:
* southbridge/intel/common/rcba.h
* southbridge/intel/common/pmbase.c
* defines in pch.h
Get rid of dependency to DEFAULT_RCBA.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: I879fce6a5bb80499e1986e618a1422a7aaa3a0c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32066
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Run CPU at the highest freqency (1989MHz) to speed up the boot time.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I703ffcb99367f87e6792a72485f5634e0505e5ac
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32466
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When we increase voltages, it takes 200us for voltages to stablize.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I5f32035693b6084dbe763411c612ae5d1f7c9e48
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Updated GPP_A8 to be a GPI and SCI source, to support both wake and
notifications.
BUG=b:128941098
BRANCH=none
TEST=Compiles, simulated pen eject with PCH_INT_L signal. Both evtest
and waking from s0ix confirm this works. The output of /proc/interrupts
confirms the correct interrupt is triggered.
Change-Id: I080fb3cbfb3e2f55209ca31824b00ca820d70f78
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT in Kconfig
BUG=none
BRANCH=none
TEST=compiles
Change-Id: If5f59ea50c13bd1f279637e281468e6d0312dbab
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32486
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be
configured as GPI, GPIO Driver mode, and SCI interrupt.
Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by
PAD_CFG_GPI_IRQ_WAKE).
BUG=none
BRANCH=none
TEST=Compiles
Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Cosmetic change to reduce line length to 80 max.
BUG=NA
TEST=Build Portwell PQ7-M107
Change-Id: Ib537592c0a6a3fffc85622e6b74ad5ec8041e7dc
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change removes all the separate entrypoint dispatch
functions as they all share the same pattern.
Furthermore, none of the function definitions under vendorcode
binaryPI/AGESA.c file have proper declarations, the ones compiler
picks up from AGESA.h are for the internal implementations and
with sanely organized headerfiles would not be exposed outside
the build of AGESA at all.
Change-Id: I0b72badc007565740c93b58743cfd048e8b42775
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IASL reports warning 'Control Method should be made Serialized'.
Change _CRS method to Serialized.
BUG=N/A
TEST=Build Intel Strago
Change-Id: I63a7e1caab19360a9a5831458311d5a83fdf52d1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Due to PCB limitations the SD-Card interface is not able to operate
with the highest frequency reliably. The OS driver will switch to
the highest mode if a SD-Card is attached which supports this high
frequency mode. In order to work around this PCB limitation disable the
high frequency modes in the controller capabilities (SDR104 and HS400
mode) and leave SDR50 and DDR50 enabled.
Change-Id: Ia5fed5fb70b027de34170b49620927614a00fb7a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
References to MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID} were removed.
Change-Id: I70ef22aac165a19663749f76449907482b761316
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The entry for drivers/intel/fsp1_0/Kconfig was added under the
chipset menu before addtional FSP versions were added, and the
drivers/*/*/Kconfig entry added to support them. This results
in the fsp1_0 Kconfig items being duplicated in the Chipset and
Generic Drivers menus.
Remove the chipset entry since it's no longer needed.
Test: select FSP 1.0 mainboard (e.g. intel/minnowmax) in menuconfig,
observe FSP 1.0 Kconfig entries listed only under Generic Drivers menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: If1e78fb9259b1a46d308db829881eb3b3d17cf40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32565
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=N/A
TEST=N/A
Change-Id: I1b207e0b77bac8860ba7501378297c1f3604141c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32453
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IASL reports warning 'Control Method should be made Serialized'.
Change _CRS method to Serialized.
BUG=N/A
TEST=Build Google Banon and Google Cyan
Change-Id: Iffa097a2100cfa91efa3b617311500b83f839bce
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
CB acts as I/O handler for QCLib (e.g. DDR training data)
This interface allows bi-directional data flow between
CB and QCLib
Tested and working interfaces:
DDR Training data
QCLib serial console output
DDR Information (base & size)
limits cfg data
TEST=build & run
Change-Id: I073186674a1a593547d1ee1d15c7cd4fd8ad5bc1
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
TEST=build & run
Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that support has been added for using the public FSP
repo for Braswell platform, clean up Kconfig options and
set sane defaults when using it.
The following changes have been made:
- add option to use the 3rdparty/fsp repo for Braswell platform
- reorder FSP 1.1 Kconfig entries for improved flow/readability
- set the default path for the FSP binary based on use of FSP
repo and platform
- set the CBFS location for the FSP binary based on platform
Change-Id: Ie2f732bf0ac4d4551908caa56360b8bb2869b4c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The current Braswell FSP 1.1 header in vendorcode/intel, for
which there is no publicly available FSP binary, contains silicon
init UPDs which are not found in the publicly available header/binary
in the FSP Github repo. This prevents new boards from being added
which use the public Braswell FSP header/binary.
To resolve this, move the UPDs not found in the public header from
the soc's chip.c to ramstage.c for the boards which use them. Add
a Kconfig option to use the current non-public FSP header and
select it for boards which need it (google/cyan variants); set the
public FSP option as the default. Use the Kconfig option to set
FSP_HEADER_PATH to ensure the correct header is used.
Test: build google/cyan and intel/strago using non-public and
public FSP header/binaries respectively.
Change-Id: I43cf18b98c844175a87b61fdbe4b0b24484e5702
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Rather than selectively update the fsp submodule based on
FSP version or platform selection, update it when building
for any FSP-enabled platform, so all have latest version available.
Change-Id: If07d55828a1863623e04a4ecdd1514c3cb6d9c11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable acoustic noise mitgation for arcada platform,
the slow slew rates for Ia and Gt are fast time dived by 8.
BUG=b:131144464
TEST=waveform test and hardware validation result pass.
Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com>
Change-Id: I395b2fc527705ab207325cfd7147e6af5f300fce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Main objective for this change is to export the bluetooth reset
gpio to the kernel for use in an rf-kill operation.
To do so, we enable USB acpi and define all of the USB2 devices,
which includes bluetooth's reset gpio information.
BUG=b:122540489
BRANCH=None
TEST=emerge-atlas coreboot chromeos-bootimage
$cat sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dat &
retrieve ssdt.dat from DUT &
$iasl -d ./ssdt.dat & check the HS03 node is with "reset-gpio"
under _DSD object
Change-Id: I411ef707782655361bd1b8ac2b914b8ae64defeb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Caveh Jalali <caveh@google.com>
|
|
Change-Id: I115e065ce11946b85571e7233203be68c1789d70
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds code to initialize two USB DWC3.0 controllers
and its associated QUSB V2 10nm PHYs to the SDM845 SOC, and uses them to
initialize USB3.0 on the cheza mainboard.
Synopsis controller initialization and configuration sequences taken from
USB 3.0 HPG chapter 2.2 and refer PHY HPG chapter 10.2 for QUSB phy
programming.
Includes Super speed mode support.
TEST=USB keypad and mass-storage device enumeration tested with this patch
Change-Id: I475a7757239acb8ef22a4d61afd59b304a7f0acc
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Idebbbd89de05d949e6f953aa49d8662d64383d1a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch selects EC_ACPI kconfig to identify Intel Ice Lake
RVP board by querying EC.
Change-Id: I0082e04ef1b21d533e40d232209ee630f748aec6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This implementation corrects the GPE DWx mapping for GPIO groups.
The assignments is done in GPIO MISCFG register for all GPIO communities.
And configures the which GPIO communities get register as Tier1.
Change-Id: I9c306d46e5194944def26c24cdb95f5ebada42b8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patch ports CB:32275 changes from CNL to ICL.
Ice Lake require that FSP-M component should be
XIP. This change selects FSP_M_XIP so that the right arguments are
passed into cbfstool when adding this component.
Change-Id: Icc5550f1f94957fa1b28c8bba6fc0efee98e233e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32507
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ports CB:31787 and CB:31908 changes from CNL to ICL.
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: Ib7ab95b7bbcc97a076d27a11db2105f7b976b521
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32506
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes unused pch_log_state() function declaration from pch.h
because elog.c has static implementation of pch_log_state().
Change-Id: Ib0f3831dc3b60af2ee432a76866e401a51b96fb7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32505
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ports CB:30718 and CB:31908 changes from CNL to ICL.
Add logging of chipset events on boot into the flash event log.
This was tested on a google/dragonegg board to ensure that events
like "System Reset" are added to the log as expected.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patch ports CB:31902 changes from CNL to ICL.
The prev_sleep_state value was showing 5 even after warm reboot, once the
SUS_PWR_FLR bit is being set. This bit was not being cleared.
Hence clearing the PMCON status bits.
Change-Id: Ia07aa17b4491216a277c36edfe6ed2aa489287c6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32503
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 351e3e5 ("src: Use include <console/console.h> when appropriate")
has broken the build here, see below, so we include console.h here again.
In file included from src/device/oprom/x86emu/x86emui.h:65,
from src/device/oprom/x86emu/debug.c:40:
src/device/oprom/x86emu/debug.c: In function 'x86emu_dump_regs':
src/device/oprom/x86emu/debug.h:46:22: error: implicit declaration of function 'printk'; did you mean 'printf'?
[-Werror=implicit-function-declaration]
#define printf(x...) printk(BIOS_DEBUG, x)
^~~~~~
src/device/oprom/x86emu/debug.c:366:5: note: in expansion of macro 'printf'
printf("\tAX=%04x ", M.x86.R_AX );
^~~~~~
Fixes: 351e3e5 ("src: Use include <console/console.h> when appropriate")
Change-Id: I75d0b7c08bfa6dcb07778bbb762223b62cfc3da7
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Chromebook doesn't require support wake on LAN in S5.
Disable it by default for power saving.
BUG=b:131571666
TEST= check LAN indicator is off under S5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
a 1M CBFS size is inadequate when adding the FSP binary to
image due to default FSP location in CBFS, so bump to 2M
to ensure autobuilds succeed.
Change-Id: I0683bea43cc71fad32bc42bfbd72f3913256d53c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
DMA remapping structure flags settings are Bit 0: INTR_REMAP, Bit 1:
X2APIC_OPT_OUT, Bit 2: DMA_CTRL_PLATFORM_OPT_IN_FLAG, Bits 3-7:
Reserved (0).
BUG=b:130351429
TEST=Image built and kernel booted to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Iaf4764a9062756cadc335d1932b0da8628797f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32516
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For GPIO pads that are configured as no-connect (PAD_NC), setting it
as GPI (with Rx enabled) leads to GPE0_STS being set
incorrectly. Though this is not an issue in practice (GPE0_EN is not
set, so no events triggered), it can confuse users when debugging GPE
related issues.
This change configures PAD_NC to have Rx disabled along with Tx to
ensure that it does not end up setting GPE0_STS bits for unwanted
GPIO pads.
P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that
configuration as is.
BUG=b:129235068
TEST=Verified that GPE0_STS bits are not set for pads that are marked
as PAD_NC.
Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
* MSI MS-7707 V1.1 (Medion OEM Akoya P4385D MSN10014555)
* SandyBridge Intel P67 (BD82x6x)
* Winbond 25Q32BV (4MB)
* Fintek F71808A
* Intel 82579V Gigabit
* NEC uPD720200 USB 3.0 Host Controller
* IME 7.0.4.1197
Working:
* PCIe gfx adapter
* PS/2 Keyboard
* USB3.0
* Ethernet
* S0/S3/S5
* HWM
Change-Id: I999149bb95d553ed217b2288cc34bce4fe88abb3
Signed-off-by: Max Blau <tripleshiftone@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add more registers and make them optional, so they keep untouched/
their default if omitted.
Change-Id: I5d8008176d2972976b387c558658b8e70b50af8e
Signed-off-by: Max Blau <tripleshiftone@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Increase ramstage to 2M, required to actually embed the 7.2mb uImage
into the coreboot.rom, increase the postram cbfs cache in order for the
fit image to be loadable (without this increase the fit payload is found
but not loaded)
Change-Id: Iee0ed9f7958588ceda54bb32253c84cac68abea2
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The name OPROM is somewhat inaccurate, since other steps to bring
up display and graphics are needed depending on mainboard/SoC.
This patch cleans up OPROM code nomenclature, and works towards
the goal of deprecating vboot1:
* Rename CONFIG_VBOOT_OPROM_MATTERS to
CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig
description
* Remove function vboot_handoff_skip_display_init
* Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY
* Add |flags| field to vboot_working_data struct
* Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff
BUG=b:124141368, b:124192753, chromium:948529
TEST=make clean && make test-abuild
TEST=build and flash eve device; attempt loading dev/rec modes
BRANCH=none
Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Patch corrects IRQ and GPIO configuration for RT5682 codec's Jack INT.
Switching IOAPIC to GpioInt because ACPI Interrupt() doesn't support
jack triggering on both edges.
BUG=b:130180492
TEST=build and boot on a CML EVT board.
Use evtest & verify headset jack detection functions as expected.
Change-Id: Ia9bf8d554b54554f9ac1e78fd44a508964c8a14d
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Suggested-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32474
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Describe the Firmware Interface Table and reference useful documentation.
Change-Id: I00abc1fd13be7b48d56ba8cb65d2542ed07f9017
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use already defined system_reset() function.
Change-Id: I6e5aff96e06830931acf700593d3e1689857efdc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use already defined system_reset() function.
Change-Id: Ieff4271c4a09d564d5f3415d8bc2c3843c8460f2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() function.
Change-Id: I68ff4cffa2bfab6a15299795c3e1837fc9b85806
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() function.
Change-Id: I32c731de0c30940d15fd01fec6f10b3b33c04370
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() and full_reset() functions.
Change-Id: Ib7e399b5186aa704d0388c4a4b18480f2e3799f3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() function.
Change-Id: I436f62c4402736fb74c59d8b359d0b3963f0e659
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use already defined system_reset() and full_reset() functions.
Change-Id: I0a05f3ac5c5340a509024de2b444960f498c3e99
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Trusted Firmware places some components in SRAM on RK3399 and therefore
restricts accesses to SRAM to the secure world. This makes the vboot
working data inaccessible to normal world payloads, so we need to
migrate it into CBMEM.
Change-Id: Ic7c95790f2f118ccbdd897550f13b5f987bdd831
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
Implement mt_pll_raise_ca53_freq() in MT8183 to raise the CPU frequency.
Move the function declaration to common header.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: Ide8d767486d68177fa2bfbcc5b559879eca1bcda
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at
most. We have to raise CPU frequency to 1989MHz after increasing CPU
voltage to 1.05v in romstage.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
NEED_VB20_INTERNALS should always be specified when peeking
into vboot internal data structures.
BUG=b:124141368, chromium:956474
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5a47a28350fd5a68efeff0d06ca150c1ae145412
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Disable the GBB flag forcing manual recovery now that we can read
the manual recovery from H1.
Enable the GBB flag to skip EC software sync, since images built
from coreboot.org do not include the EC binaries by default.
Change-Id: I0e1d6304e3e29eda68c7b807cf0774275c37d710
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit 9aae51ad1141a47d5c2f7133b02f5f0ab6168860.
Proper code in cpu/intel/common/ shall be used instead.
Change-Id: I4a5d558b03497d106083eece10c5b34e0e7cbb2d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29683
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|