summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-04-15ipq806x: modify imem layoutDeepa Dinamani
2015-04-15soc/ipq806x: Disable LPAE mode.Deepa Dinamani
2015-04-15storm: add code for detecting rec/dev/write protect switches' statusDaisuke Nojiri
2015-04-15ipq806x: set architecture to ARMV7Vadim Bendebury
2015-04-15broadwell: Fixes for _SWS supportDuncan Laurie
2015-04-15broadwell: Remove unused bootblock codeDuncan Laurie
2015-04-15broadwell: Clean up ME device and add new ME10 flowDuncan Laurie
2015-04-15soc/baytrail: Use microcode from the blobs repositoryMarc Jones
2015-04-15soc/broadwell: Use microcode from the blobs repositoryMarc Jones
2015-04-15veyron: Add "backlight" GPIO to coreboot tableJulius Werner
2015-04-15brain: remove sdmmc_power_off() in romstageDavid Hendricks
2015-04-15veyron_danger: Enable EDP display initDavid Hendricks
2015-04-15Danger: Apply differences between Brain and DangerDavid Hendricks
2015-04-15Danger: Initial mainboard importDavid Hendricks
2015-04-15rk3288: send correct EDID buffer sizehuang lin
2015-04-15rk808: Implement RTC driverDavid Hendricks
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
2015-04-15rk3288: Implement support for CRYPTO module and use it in vboot hashingJulius Werner
2015-04-15veyron: add H9CCNNN8GTMLAR sdram in speedyJiazi Yang
2015-04-15veyron: Support Speedy v1 hardwarehuang lin
2015-04-15Brain: Apply differences between Jerry and BrainDavid Hendricks
2015-04-15Brain: Initial mainboard importDavid Hendricks
2015-04-15blaze: add new Micron 2GB BCTNeil Chen
2015-04-15veyron: Fix TPM I2C initialization and sync boardsJulius Werner
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
2015-04-15veyron: Support Mighty v1 hardwarehuang lin
2015-04-15veyron: Support Jerry v3 hardwarehuang lin
2015-04-15veyron: Support Pinky v4 hardwarehuang lin
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
2015-04-15veyron_speedy: Support Samsung-4GB and Lynix-4GB LPDDRhuang lin
2015-04-15veyron: Add veyron_speedy boardhuang lin
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
2015-04-15Kconfig: Fix incorrect CONFIG_STACK_SIZE values for X86 and ARM64Julius Werner
2015-04-14Add console wrapper for UART driverVadim Bendebury
2015-04-14libpayload: avoid hanging on make junit.xmlPatrick Georgi
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
2015-04-14pistachio: modify timer to account for CPU counter overflowIonela Voinescu
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
2015-04-14arm64: Increase dma region size to 32MiBFurquan Shaikh
2015-04-14tegra132: lock down VPRAaron Durbin
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
2015-04-14libpayload: Add dwc2 usb driverhuang lin
2015-04-14rush: Enable dp displayJimmy Zhang
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
2015-04-14rush: Add dp related parametersJimmy Zhang
2015-04-14arm: Fix checkstack() to use correct stack sizeJulius Werner
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
2015-04-14timestamps: You can never have enough of them!Julius Werner
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
2015-04-14chromeec: Fix printf formatting warningAnatol Pomozov
2015-04-14storm: add ipq8064 blobs to the CBFSVadim Bendebury
2015-04-14ipq8064: use the new utility to build bootblockVadim Bendebury
2015-04-143rdparty: move checkout marker forwardStefan Reinauer
2015-04-13ti/am335x: switch to generic udelayPatrick Georgi
2015-04-13arch/mips: provide proper cache primitivesIonela Voinescu
2015-04-13broadwell: Work around VBIOS framebuffer issueDuncan Laurie
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
2015-04-13rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speedJulius Werner
2015-04-13storm: Fix timer init order problemJulius Werner
2015-04-13ipq806x: copy i2c, qup, and gsbi drivers from depthchargeDaisuke Nojiri
2015-04-13storm: add hard_reset templateDaisuke Nojiri
2015-04-13util/ipqheader: Add utility to create uber-SBL for IPQ8064Vadim Bendebury
2015-04-13mips: disable caches in bootblock startup codeVadim Bendebury
2015-04-13tpm: Only expose base address Kconfig option when enabledPatrick Georgi
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
2015-04-13arm: Redesign mainboard and SoC hooks for bootblockJulius Werner
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rk3288: Increase the delay after DDR reset de-assert to 10us.Dailunxue
2015-04-13t132: Add I2S1 support to funitTom Warren
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:24:27 +0000