summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-27util/mainboard/google: add support for VolteerPaul Fagerburg
create_coreboot_variant.sh now supports the Volteer baseboard in addition to Hatch. The shell script and supporting python code are moved up one level, while retaining the ${BASE}/template/* file structure for each supported baseboard. kconfig.py has to add slightly different text to Kconfig.name depending on which baseboard is selected. BRANCH=None BUG=b:146646594 TEST=Create variants of Hatch and Volteer, check that the staged commits are correct. $ ./create_coreboot_variant.sh hatch sushi b:12345 src/mainboard/google/hatch/Kconfig and Kconfig.name will have new sections for SUSHI. src/mainboard/google/hatch/variants/sushi will have a copy of util/mainboard/google/hatch/template $ ./create_coreboot_variant.sh volteer ripto b:12345 src/mainboard/google/volteer/Kconfig and Kconfig.name will have new sections for RIPTO. src/mainboard/google/volteer/variants/ripto will have a copy of util/mainboard/google/volteer/template Also run the script with an existing board name to verify that you can't create a variant that already exists. Change-Id: I084b6c50bb76af0d11dc86a96b3c3c434569a0dd Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
We found the driver binding failure issue could be cleared with 100ms of "reset_delay_ms". Needs further check with device vendor, anyway it seems the IC need some time before communication after de-assertion of reset. BUG=b:129159369 BRANCH=firmware-hatch-12672.B TEST=Verified driver bound successfully. Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-27cpu/intel/microcode: Apply more strict guard for assembly filesKyösti Mälkki
Change-Id: I8243be7c9a57402b2ac1cfa1c0552990d4a4ba74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-27arch/x86: Remove <arch/cbfs.h>Kyösti Mälkki
There are no symmetrical headerfiles for other arch/ and after ROMCC_BOOTBLOCK and walkcbfs() removal this file ended up empty. Change-Id: Ice3047630ced1f1471775411b93be6383f53e8bb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-27arch/x86: Remove walkcbfs()Kyösti Mälkki
This was used in romcc bootblocks. Change-Id: Ie0cfbf124922d04a3320404d667610ad369ec00b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-12-27util/romcc: Drop romcc supportArthur Heymans
Finally all boards use a GCC compiled bootblock! Change-Id: I0c9a1b19dbdc32b43875da7d685718bae9d7f5f4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37337 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27Makefile: Remove romccElyes HAOUAS
Change-Id: I2fe7fa8b23da3b909adc2b8bce59304acfb5b807 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-12-27arch/x86: Drop ROMCC_BOOTBLOCK symbolArthur Heymans
Change-Id: I968c4392849045cd50bfe2c83de44daba38ee245 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-27bootblock: Support normal/fallback mechanism againKyösti Mälkki
Change-Id: I7395e62f6682f4ef123da10ac125127a57711ec6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37760 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
Add a new sku for dragonair BUG=b:146504217 TEST=emerge-hatch coreboot Change-Id: I4492d65f35d3583df1606c5f2901228b3ae14e4a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-27ec/google: Fix wedging AP on early ec sw syncTim Wawrzynczak
If the EC doesn't support the EARLY_EC_SYNC we don't properly set power limits to reasonable defaults and can wedge the AP by browning out at the end of vboot. BRANCH=none BUG=b:146165519 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4e683e5a1c5b453b3742a12a519cad9069e8b7f7 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37930 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27drivers/ipmi/ipmi_fru: Add missing <stdlib.h>Elyes HAOUAS
malloc() needs <stdlib.h> Change-Id: I0cf6a5b76543cb6dac584de6628cfc459d5a60a8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37884 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27src/include: Remove min/max() from <stdlib.h>Elyes HAOUAS
Change-Id: I9ded44422a267e244343502dd5d6ab355e5a788d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37378 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-27mb/*/*/early_init.c: Remove defined but not used macroElyes HAOUAS
Change-Id: I69c3b0b96fde8dc44a961c3d687f5aadbbdddde0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37644 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26util/superiotool: alter Makefile to build the binary on FreeBSDIdwer Vollering
Change-Id: Ia96bee18abcdf278ae9178471cd4af2de454facf Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-26nb/haswell/minihd: correct subsystem IDMatt DeVillier
The subsystem ID for Intel Mini-HD is always 0x80860101. Change-Id: I74cbba31e93f9bb5b18d3ada780a0f24614ba029 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26soc/broadwell/minihd: correct vendor, subsystem IDsMatt DeVillier
Codec vendor ID was copy/pasted from Haswell, should be 0x80862808. Subsystem ID for Intel Mini-HD is always 0x80860101. Change-Id: Idf4446d3437de0dc533baa3b2b4eb49f816807a6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/hatch: Clean up duplicate methodEric Lai
Moving Enable/disable GPIO clock gating to soc level. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9be77908b4e44e08a707812fd8b23b23bcb56671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-26mb/google/octopus/variants/dood: support LTE moduleRen Kuo
related LTE GPIOs: GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:146843935 BRANCH=octopus TEST=build and verify on the DUT with LTE Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Ief6c993ede2bb4b3effbb05cfe22b7af4fcf7faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/37931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/bobba: fix LTE power sequence and moveSheng-Liang Pan
get_board_sku to smm stage. fix Power_off section power sequence. power_off_lte_module() should run in smm stage, add variant.c in smm stage. also move get_board_sku() to mainboard_misc.c so that we can use it in smm stage and ramstage. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I287ba1cb092a95b3a9dd1f960a3b84fd85b9b221 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37649 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/octopus: Add two new sku IDs for foobTommie
Declare these sku IDs: -SKU: 1 Foob, 1-cam, no touch, no pen. -SKU: 9 Foob360, 2-cam, touch, pen. BUG=b:145837644 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Iffcbb3f6f945ea299ff687a383a82b88dcd11ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26soc/intel/cannonlake: Move GPIO PM configuration to soc levelEric Lai
Enable GPIO clock gating when enter s0ix/Sx and save the PM bits. Restore the PM bits when exit s0ix/Sx. BUG=b:144002424 TEST=Check GPIO PM bits when enter/exit s0ix are expected Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I120f8369b8d3cf7ac821332bdfa124f6ed0570e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-26Doc/tutorial/part2.md: Align headings with part1.mdAngel Pons
Substitute `Part` with `Step` on this file's headings and use present tense instead of gerund. Change-Id: Ic130ed9865be43716e7de3121534761d9fc2ae8d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-12-26Doc/tutorial/part1.md: Fix minor formatting issuesAngel Pons
Make sure all titles are capitalized, and add a missing period. Change-Id: I48b8d6c85b915cc422bdfa3a89804f92f46800ba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-12-26Doc/index.md: Fix a typoAngel Pons
Change-Id: Ib2f48d03e78f6da97383e67b1d50dfe859e59612 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-26drivers/generic/cbfs-serial: Add driver to read serial from CBFSMatt DeVillier
Add a new driver to support reading a board serial number from a text file in CBFS and injecting into the SMBIOS tables. Allow driver to be selected at the .config level and not require inclusion at the board level. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ieae39f39ab36e5b1f240383b7cf47681d9a311af Reviewed-on: https://review.coreboot.org/c/coreboot/+/37917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-12-26src/x86|cpu/intel: Hardcode FIT and IDMarshall Dawson
Revert two of the changes made in "arch|cpu/x86: Add Kconfig option for x86 reset vector" I6a814f7179ee4251aeeccb2555221616e944e03d The Intel FIT pointer and the ID section should be offsets from the top of flash, and aren't inherently tied to the reset vector or to bootblock. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I2c9d5e2b2c4248c999d493a72d90cfddd92197cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/37877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-12-26soc/amd/picasso: Configure APOB NV only with ACPI resumeMarshall Dawson
The APOB NV region holds the save data for resuming. Omit it if the mainboard doesn't use HAVE_ACPI_RESUME. The APOB information will also be board-specific so remove the default values. Change-Id: I65a70bb86ad1f3c11ce37d0afa5a6fdd08bc46e2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
300ns According to SI team and vendor request, need to tune I2C bus 0 data hold time more than 300ns BUG=b:146163044 TEST=build firmware and measure I2C bus 0 data hold time Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I75e33419cbaef746487de6ee8628d07cf08adaa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37322 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26Doc/releases/checklist.md: Correct some inconsistenciesAngel Pons
Use periods on every element of a list, and make `IRC` uppercase. Also, correct a grammar mistake that slipped through. Change-Id: Id05865719c7c845265416e89bfd9b02b6d22ca6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-12-26mb/google/eve: select SYSTEM_TYPE_CONVERTIBLEMatt DeVillier
select SYSTEM_TYPE_CONVERTIBLE, which properly sets the SMBIOS chassis type, and allows the OS driver to recognize tablet mode capability Change-Id: Ic61659e9fa6f7428afd1f018fb8cb25fe49e8747 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26mb/google/kefka: Add missing SPDMatt DeVillier
Adapted from Chromium commit 9522225e [Kefka: Add memory SPD info for Hynix H9CCNNN8GTALAR-NUD] Add current available ram_id to support Hynix H9CCNNN8GTALAR-NUD spd info. RAM_ID: 0110 4GiB Hynix H9CCNNN8GTALAR-NUD RAM_ID: 0111 2GiB Hynix H9CCNNN8GTALAR-NUD Original-Change-Id: I48386ff3e5f80de94ea87359a09a5ec2577043b5 Original-Signed-off-by: Peggy Chuang <peggychuang@ami.corp-partner.google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/664517 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I0ae76c4d8313246927bbc3f71b21f3611c89a6e3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26mb/google/eve: Update and fix VBTMatt DeVillier
Update Eve's VBT from v211 to v221, and change the backlight control type from PWM to VESA eDP/AUX. This allows the OS to select the proper backlight control type for the panel. Test: Eve backlight control now functional under Windows 10 (Linux requires some pending patches to fix) Change-Id: I8be2a719765891b3f2702c1869981009fa73ca05 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26src: Remove unused include <string.h>Elyes HAOUAS
Change-Id: Ic6b66dd8fa387e67bb0ce609fb7e2553eeb66b3c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
In https://review.coreboot.org/c/coreboot/+/37459 (commit fcd8c9e99e7f70e2b9494f2fa28a08ba13126daa) which moves power/reset pin control of FPMCU to var/board/ramstage, but does not implement it for dratini/jinlon. So, add it in dratini/jinlon. BUG=b:146366921 TEST=emerge-hatch coreboot Change-Id: I1b6dbe4ba0a1242aa64346410beed4152b4f457f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26soc/intel/cannonlake: Clean up report_cpu_info() functionUsha P
This patch makes below clean-up for report_cpu_info() function. 1. Remove unused variables. 3. Reuse fill_processor_name. TEST = Successfully able to boot hatch and verify the cpu_name "CPU: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz" Change-Id: I41c76eb93f0c5229c4a49ab041339b6ad51ad24a Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-12-26soc/intel/cannonlake: Refactor pch_early_init() codeUsha P
This patch keeps required pch_early_init() function like ABASE programming, GPE and RTC init into bootblock and moves remaining functions like TCO configuration and SMBus init into romstage/pch.c in order to maintain only required chipset programming for bootblock and verstage. Rename the pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot hatch successfully. Change-Id: Idf7b04edc3fce147f7857561ce7d5b0cd05f43fe Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-12-26soc/intel/skylake: Rename pch_init() codeUsha P
This patch renames pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot soraka successfully. Change-Id: Idf7b04edc3fce147f7957561ce7d5a0cd05f53fe Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-12-26vendorcode/intel/fsp/fsp2_0/tgl: Add FSP header files for Tiger LakeSubrata Banik
Add header files for FSP for Tiger Lake platform version 2457. Change-Id: I52bb2e164cc89d3535fe67493686d1e8e064e31e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
The change applies the DPTF parameters received from the thermal team. BUG=b:146540028 TEST=build and verified by thermal team. Change-Id: I222bac5f04ba5cdde1788c6d4ca8af80d323ca98 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-26mb/google/octopus/variants/garg: update new SKUKevin Chiu
add new SKU ID below: 19 - Garg PVT (HDMI DB, Touch) 20 - Garg PVT (2A2C DB, Touch) 38 - Garg360 EVT (2A2C DB, touch, no stylues, rear camera) BUG=b:146260545 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ic74ce14db7060f3124c1a277eb3625ce0ff0b9f0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/gigabyte/ga-b75m-d3h: enable superspeed ports for all variantsBill XIE
Unlike other Panther Point boards, the ga-b75m-d3h lacks definitions to wire SuperSpeed-capable ports to XHCI in its devicetree, causing these ports being wired to the second EHCI, and only working as USB 2.0 ports. The missing register definitions are added to fix that. Tested on my ga-b75-d3v board. Change-Id: Ida4de26f1a493ead83065b1ab27c0c684a074513 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26util/pgtblgen: Fix qemu on KVMPatrick Rudolph
Running the x86_64 qemu mainboard target with '-accel kvm' results in hang, as the 'D' and 'A' bits needs to be set in read only page tables. Tested on QEMU Q35: Boots into payload with '-accel kvm'. Change-Id: I4beae8deec6bf34f9762e7b54c5da4e5b63f6d24 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36778 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26soc/amd/common/car: Remove unneeded headerKyösti Mälkki
Change-Id: I9c65d3c54efcdec1ebb2648d078acdd9e7c11c49 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-26cpu/intel/car/p4-netburst: Add assert for SIPI_VECTOR_IN_ROMKyösti Mälkki
Location of _start16bit in entry16.inc is about to see some changes, lets make sure they don't break the alignment requirement here. Change-Id: Id8a0964982387e5321e8c89254922e1242cf85ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-26asus/am1i-a: Switch away from ROMCC_BOOTBLOCKMike Banon
Switching was done by moving a SIO configuration and the clocks setup from 'romstage.c' to 'bootblock.c', following the example of change CB:37719 (fc749b2). TEST=Boots into Artix Linux 2019 without a problem. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I780fa87cb9cb3c45844c388331ef89eb8eb70ebb Reviewed-on: https://review.coreboot.org/c/coreboot/+/37829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-25mb/supermicro/x11-lga1151-series: Remove default devicetree valuesPatrick Rudolph
The same default values are used if the values are not present in devicetree. Change-Id: Ic910cdc8077e1b3e98eadc77a2d1fa0f9cb38e5b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
2019-12-25soc/intel/skylake/vr_config: Use lookup table by defaultPatrick Rudolph
If the board doesn't provide VRconfig in devicetree make sure to use the lookup table for IccMax instead of defaults for some mobile SoC. Also use decimal values instead of hex. Change-Id: If31063f9b483a3bbd6cc90df1c1b76b4efc66445 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37598 Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
BUG=b:144809606,142094759 BRANCH=none TEST=none Change-Id: Iae20d2262c910044dde84f10d795f4aee3318532 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Kangheui Won <khwon@chromium.org> Co-Author: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37925 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
Follow MEM_STRAP_* comment style to be consistent with other boards. BUG=b:144809606 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_H3 gpio config for easier review. This toggles the MAX amp which not all boards have. Move the pin configuration to boards with the respective devicetree configuration following on from the theme of commit b417786525. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_C15 group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_A* group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
To be safe for now, don't differentiate between SKUs and use lower values to ensure board won't be browned out. BUG=b:143246320 TEST=none BRANCH=none Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24vendorcode/amd/pi/Kconfig: Add prompt to pre/post pi filesRaul E Rangel
This allows the values to be set in a .config BUG=none TEST=Was able to set the value from a .config and built careena firmware Change-Id: I757e4b9a0b80ff42c1f49143a44f15550366fd0b Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37879 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
Generally work towards a more loose baseboard definition by moving out some original assumptions to be board specifics. Specifically Puff does not have the MAX98357A speaker amp and enabling the driver winds up generating incorrect SSDT tables that confuse the kernel. Since devicetree inherits the chip from device node in base and an override will also inherit the chip and thus dispatch the unwanted fill_ssdt fn call. V.2: lean on linker to drop max98357a driver when not in dt. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
Enable PCH HDA and configure dmic+ssp registers. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If9495261201ca256cdb35352338c0b3a82a50196 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
Two things here: i. ) FSP requires that function 0 be enabled whenever any non-zero functions hang under the same bus:device. ii.) FSP reorders function 6 RP to be function 0 if function 0 is indeed unused. BUG=b:146437819 BRANCH=none TEST=none Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-22superio/common: Add more ACPI methodsPatrick Rudolph
* Make use of introduced SSDT config mode access * Make use of introduced SSDT mutex * Provide ACPI functions to safely access SIO config space * Implement method to query LDN enable state * Implement method to set LDN enable state * Use introduced functions to implement _DIS and _STA in the device * Update documentation Tested on Aspeed AST2500 and Linux 5.2. Manually verified ACPI code that generates no errors in Linux. Change-Id: I520b29de925f368cd71ff8f1f58d2d57d72eff8d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-22superio/common/conf_mode: Add op to write SSDTPatrick Rudolph
Add functions to write ACPI SSDT code for entering and leaving the config mode. To be used by ACPI generators. Tested on Linux 5.2 using the Aspeed SSDT generator. Change-Id: I14b55b885f1c384536bafafed39ad399639868e4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-21sb/amd/{agesa,pi,cimx}/bootblock: Use simple PCI config accessorKyösti Mälkki
Change-Id: I5e1f2ceda37927d7a75660affee8504f9f8aff15 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37597 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-21sb/amd/{agesa,pi}/hudson: Use simple PCI config accessorKyösti Mälkki
Change-Id: I3d8e21e17a0f870d854694e326b10f7d2d04e5ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37596 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20AGESA,binaryPI: Drop remains of ROMCC_BOOTBLOCKKyösti Mälkki
Change-Id: I507ac6d483d9854852d6d01f10544c450b8d33cc Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37440 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20src/mainboard: Remove unused '#include <device/pci.h>'Elyes HAOUAS
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20mainboard: Add missing include <device/pci_def.h>Elyes HAOUAS
Change-Id: I8a7c989540e8b62de7fd291f695adac849f4680c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-12-20security/vboot: Add a dedicated flag for building of vboot libraryBill XIE
As discussed in CB:35077, since both measured boot and verified boot depends on vboot library, it had better to introduce a dedicated flag CONFIG_VBOOT_LIB to control the building and linking of the vboot library, and make other flags needing vboot library select it. Only the actual verification stuff should be conditional on CONFIG_VBOOT. Change-Id: Ia1907a11c851ee45a70582e02bdbe08fb18cc6a4 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-12-20soc/intel/tigerlake: Update FSP stack and heap sizeMaulik V Vaghela
Tigerlake and Jasperlake fsp requires stack size to be minimum 192 KiB and heap size to be minimum 128 KiB. Updating both Kconfig to meet size requirements. Also updated required CAR region size during boot block due to increment in stack & heap requirement by fsp Change-Id: I38e93b5986811ff3e0a8df5f4f36af35f308cb6b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37764 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20soc/mediatek/mt8183: Use DDR clock to compute Tx delay cellHuayang Duan
The delay cell result should use DDR clock PLL rate for computation, and should not be divided by 2. This helps to improve DRAM stability. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Idf5cce206e248bb327f9a7d27c4f364ef1c68aa1 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
Before tuning i2c frequency, I2C0: 479.4 KHz I2C1: 491.4 KHz I2C4: 476.4 KHz After tuning i2c frequency, I2C0: 391.8 KHz I2C1: 396.4 KHz I2C4: 388.8 KHz BUG=b:146535585 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
jinlon supports LTE, so remove WWAN_RESET NC configuration BUG=none TEST=emerge-hatch coreboot Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20AMD {SoC, AGESA, binaryPI}: Don't use both of _ADR and _HIDMichał Żygowski
PCI devices starting from 18 are processor configuration devices for each node and are not a bus itself. According to ACPI specification 6.3 section 6.1.5: "... _HID object must be used to describe any device that will be enumerated by OSPM. OSPM only enumerates a device when no bus enumerator can detect the device ID. ... Use the _ADR object to describe devices enumerated by bus enumerators other than OSPM." PCI device 18 with its functions has a standard enumerator, which is PCI enumerator so it needs a _ADR. Create a separate ACPI device for the processor configuration space. This fixes the ACPI compliance problem from CB:36318. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie7b45ce8d9e4fdd80d90752bf51bba4d30041507 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37835 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20crossgcc: Upgrade Python to version 3.8.1Elyes HAOUAS
Change-Id: I2867d62d2e6f5ca1e97ce52ecc45a794b4831686 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20superio/smsc/lpc47m10x: Expose pnp_enter/exit_conf_stateKyösti Mälkki
Change-Id: I55915b63dbb097634a228193f62395e45a1f42fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-12-20mb/facebook/fbg1701: Correct typo in hda verbsWim Vervoorn
The MIC1 NID is configured incorrectly because of a typo. The value is 7 digits instead of 8. This is corrected by this patch. No issues are known because of this (the MIC is not connected). BUG=N/A TEST=build Change-Id: Ia12f3be7d7262829cce3400a8535a33ea1c54b78 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-20{drivers,soc}/intel/fsp1_1: Move chipset specific logo handling to SoCWim Vervoorn
FSP logo handling used PcdLogoPtr and PcdLogoSize which are elements of the chipset specific FSP structures. Create soc_load_logo() which will pass the logo pointer and size. This function will call fsp_load_logo which will load the logo. BUG=NA TEST= Build and verified logo is displayed on Facebook FBG1701 Change-Id: I86943e64ca1ddd05e7e88fc6b882cfd33b98272e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37791 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20arch/x86: Drop romcc bootblockArthur Heymans
Change-Id: I79accbe1d5a554fea75fbd866995f385f718421a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-20src: Replace min/max() with MIN/MAX()Elyes HAOUAS
Change-Id: I63b95144f2022685c60a1bd6de5af3c1f059992e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37828 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20{drivers,southbridge}: Replace min() with MIN()Elyes HAOUAS
This is to remove min/max() from <stdlib.h>. Change-Id: Ica03d9aec8a81f57709abcac655dfb0ebce3f8c6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37818 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20{nb,soc}: Replace min/max() with MIN/MAX()Elyes HAOUAS
Use MIN() and MAX() defined in commonlib/helpers.h Change-Id: I02d0a47937bc2d6ab2cd01995a2c6b6db245da15 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37454 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20drivers/pc80: Move normal/fallback mechanism outside __ROMCC__Kyösti Mälkki
Change-Id: I840885ca543375c77b7406434fd8bb4085e26938 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-20libpayload/drivers/i8042: add error messages to i8042_probeEric Lai
Print error message before error return for better debugging. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I52039dcab72c6295dfb6b887a7000a6d2bd050ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/37689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-20AGESA,binaryPI: Enable lapic early for udelay()Kyösti Mälkki
Change-Id: I7200ac0256748d9372fc39be27b86d1c93b38321 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-20AGESA fam14: Remove early PCI subsystem ID settingKyösti Mälkki
Change-Id: Id4e95c68517b01647049b5cbd50bf5a3974a9c3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-20AGESA fam14: Remove early p-state settingKyösti Mälkki
No improvement was measured with this applied. Change-Id: I99166e03f2580828c66305326f5141d956707f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37754 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mainboard/google/puff: Add extra USB configurationKangheui Won
Adding extra USB configuration since Puff has different USB ports compared to hatch BRANCH=none BUG=b:146437609 TEST=none Change-Id: I42ef6b6b718274953711c84ebe90971f108501fa Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-12-20mainboard/google/puff: Enable pcie7 ep in dtEdward O'Callaghan
Missing bus init for RTL8111H ethernet chip hanging on bus. V.2: Include admendments from Kangheui. BRANCH=none BUG=b:146437819 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I22aba312f183ea05eeb81d326ca0c05ce340a2e8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20mainboard/google/puff: Clean up dt for pci 15.2Edward O'Callaghan
Seems nothing special is needed here from coreboot. V.2: Fix typo as well in speed map. BRANCH=none BUG=b:143047058 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ief750f98677b2017af78fb0b5bc98e1492dedbe4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19soc/amd/picasso: Reduce romstage.cMarshall Dawson
Remove the old Stoney Ridge postcar stack frame setup. Reduce romstage.c to basic functionality. Until AGESA's reporting of memory configuration is available, use the TOM register as an indicator for the top of usable memory. Change-Id: I516b79c3e798f5fc68c2771b2f66034c6867b19e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-19soc/amd/picasso: Remove unused Kconfig optionsMarshall Dawson
No AGESA v5 binaryPI features are still present in the picasso directory. Remove the PI and S3 selects. Remove DCACHE symbols. Remove all vboot options until the new PSP-based solution is developed. Change-Id: I6542578afafc0ee3c3117a971b1a021dbe53f42c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-19arch/x86,soc/intel: Drop RESET_ON_INVALID_RAMSTAGE_CACHEKyösti Mälkki
If stage cache is enabled, we should not allow S3 resume to load firmware from non-volatile memory. This also adds board reset for failing to load postcar from stage cache. Change-Id: Ib6cc7ad0fe9dcdf05b814d324b680968a2870f23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-19arch/x86: Fix S3 resume without stage cacheKyösti Mälkki
It was possible to have NO_STAGE_CACHE=n and at the same time have TSEG_STAGE_CACHE=n and CBMEM_STAGE_CACHE=n. This resulted with a failing attempt to load STAGE_POSTCAR from the stage cache, but not loading it from CBFS either. Make it a three-way choice between different STAGE_CACHE options. For AGESA disable CBMEM_STAGE_CACHE by default, as it is no longer needed to have functional ACPI S3 resume and it is not allowed se use keyword select for symbols inside choice blocks. Change-Id: I0da3e1cf4c92817ffabbb02eda3476ecdfdfa278 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37683 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19commonlib/fsp_relocate: Fix typosElyes HAOUAS
Change-Id: I9426b88c0936c68d02554b580cc312902b8e5e13 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37810 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19device/pciexp: Match Max_Payload_Size between ends of a linkKyösti Mälkki
Ends of a PCIe link may advertise different Max_Payload_Size in their PCIe Express Capabilities, Device Capabilities block. For correct operation, both ends of the link need to have their Device Control Max_Payload_Size programmed to match and not exceed the other end's Device Capabilities. Fixes: https://ticket.coreboot.org/issues/218 Change-Id: I8b1de13e9c73abb30e5ccc792918bb4f81e5fe84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-19{drivers,soc}/intel/fsp2_0: Move chipset specific logo handling to SoCWim Vervoorn
FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which are chipset specific. Create soc_load_logo() which will pass the logo pointer and size. This function will call fsp_load_logo which will load the logo. BUG=NA TEST= Build and verified logo is displayed on Facebook Monolith Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19soc/intel/tigerlake: Add required header files in pch.cAamir Bohra
Add header files to fix build issues due to missing declaration for get_pch_series and die_with_post_code functions. Change-Id: Ie8ba4970ec1b73c1e481f54bcfbf95be87d9c442 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-12-19src/arch/x86: Build mainboard acpi_tables source if presentKarthikeyan Ramasubramanian
Current build rules require adding blank acpi_tables in some of the mainboards (eg. octopus, hatch). Update the build rules to compile the acpi_tables.c only if it is present. This will help to avoid adding blank acpi_tables.c source file. BUG=None TEST=Build test with octopus and hatch without blank acpi_table.c file. Change-Id: I7dfacc6f4c737699b22acd96e17c9426d33574bd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-12-19drivers/ipmi: Add IPMI Read FRU functionJohnny Lin
Implemented according to IPMI "Platform Management FRU Information Storage Definition" specification v1.0 for reading FRU data Product Info Area and Board Info Area. SMBIOS data can be updated with the FRU data. Tested on OCP Mono Lake. Change-Id: Id6353f5ce3f7ddd3bb161b91364b3cf276d020b8 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> (cherry picked from commit 8ac46b937c80822706c9d6c70ce7bbe61eb04f72) Reviewed-on: https://review.coreboot.org/c/coreboot/+/37095
2019-12-19storage/mmc: Fix wrong frequency setting for HS speed modeBora Guvendik
Emmc spec, JEDEC Standard No. 84-B51, section 6.6.2.3, selection flow of HS400 using Enhanced Strobe states that host should change frequency to ≤ 52MHz when switching to HS speed mode first. In current code, mmc_select_hs400() calls mmc_select_hs() to do this, however caps are not cleared, so when switching from HS200 to HS400, caps will still have DRVR_CAP_HS200, and mmc_recalculate_clock() will set 200Mhz instead of ≤ 52MHz. As a result, switching to HS400 will intermittently fail. BUG=b:140124451 TEST=Switch speed from HS200 to HS400 on WHL RVP. Change-Id: Ie639c7616105cca638417d7bc1db95b561afb7af Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37775 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19mb/google/drallion: Clean up unused weak functionEric Lai
Drallion only supports on board dimm. Remove the spd read from SMBus. Since CB:37678 remove the Wilco 1.0 CML variants, weak function is not needed. BUG=b:140068267 TEST=boot into OS without issue BRANCH=none Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I662f87ccf48ba470998fa28fb14c9985673cb37d Reviewed-on: https://review.coreboot.org/c/coreboot/+/37780 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 12:19:09 +0000