summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-17ARM: Remove -mno-unaligned-accessJulius Werner
We've decided that it is generally okay for coreboot to expect unaligned accesses to work. Trying to find all instances of unaligned access opportunities and working around them in software would be an unsustainable whack-a-mole contest. Instead, architectures and boards need to make sure they conform to this, which on ARM and ARM64 requires setting up paging early in the bootblock. Other architectures (x86, ARM64, MIPS) already generate code in this manner. ARM still had an -mno-unaligned-access flag hanging around that has been copied so many times its initial origin was lost in time (probably U-Boot). Let's remove it for consistency between architectures and to improve code generation. BRANCH=veyron BUG=None TEST=Booted Jerry and Blaze. Looked at the disassembly for timestamp_sync() and confirmed that it only gives you half as much eye cancer as before (GCC still somehow insists on byte accesses when zeroing fields which is very odd, but at least that terrible AND/OR mess is gone). Measured a boot time increase of about 11ms on Jerry (mostly faster timestamp and CBFS accesses). Could not test Storm because despite our claimed abundance of test devices, every time I get one of them it magically disappears again in less than a week. Change-Id: I8fc08cc7ce4471651a51ee795269909ef69277c8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 07591fadb89bd127fe065abf0b9ba3facecf1aeb Original-Change-Id: I1d046e05bb11822b86e467eafb6aa92e8fbce774 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/241732 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9728 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17libpayload: Take flash parameters from corebootDan Ehrenberg
A payload may want to run erase operations on SPI NOR flash without re-probing the device to get its properties. This patch passes up three properties of flash to achieve that: - The size of the flash device - The sector size, i.e., the granularity of erase - The command used for erase The patch sends the parameters through coreboot and then libpayload. The patch also includes a minor refactoring of the flash erase code. Parameters are sent up for just one flash device. If multiple SPI flash devices are probed, the second one will "win" and its parameters will be sent up to the payload. TEST=Observed parameters to be passed up to depthcharge through libpayload and be used to correctly initialize flash and do an erase. TEST=Winbond and Gigadevices spi flash drivers compile with the changes; others don't, for seemingly unrelated reasons. BRANCH=none BUG=chromium:446377 Change-Id: I92b7ff0ce66af8d096ec09a4c900829ef6c867e0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126 Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72 Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/239570 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17drivers/spi: Pass flash parameters from coreboot to payloadDan Ehrenberg
A payload may want to run erase operations on SPI NOR flash without re-probing the device to get its properties. This patch passes up three properties of flash to achieve that: - The size of the flash device - The sector size, i.e., the granularity of erase - The command used for erase The patch sends the parameters through coreboot and then libpayload. The patch also includes a minor refactoring of the flash erase code. Parameters are sent up for just one flash device. If multiple SPI flash devices are probed, the second one will "win" and its parameters will be sent up to the payload. TEST=Observed parameters to be passed up to depthcharge through libpayload and be used to correctly initialize flash and do an erase. TEST=Winbond and Gigadevices spi flash drivers compile with the changes; others don't, for seemingly unrelated reasons. BRANCH=none BUG=chromium:446377 Change-Id: Ib8be86494b5a3d1cfe1d23d3492e3b5cba5f99c6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 988c8c68bbfcdfa69d497ea5f806567bc80f8126 Original-Change-Id: Ie2b3a7f5b6e016d212f4f9bac3fabd80daf2ce72 Original-Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/239570 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17Add delay before reading GPIOs in gpio_base2_value()David Hendricks
This adds a 10us delay in between (re-)configuring and reading GPIOs in gpio_base2_value() to give the values stored some time to update. As far as I know this hasn't bitten us since the function was added, but adding a short delay here seems like the right thing to do. BUG=none BRANCH=none TEST=built and booted on Brain Change-Id: I869cf375680435ad87729f93d29a623bdf09dfbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2484900fc9ceba87220a293de8ef20c3b9b20cfd Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I79616a09d8d2ce4e416ffc94e35798dd25a6250d Original-Reviewed-on: https://chromium-review.googlesource.com/240854 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9725 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17urara: add board id information for urara boardIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; works as expected. BRANCH=none Change-Id: If4493fcb37cf649fb0a56d594ac58556da3aa571 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f6764396be1ab17875d9c73624cce48dc6790e6 Original-Change-Id: I925ebd6ea4fc30c1c1d91559f96eaad62d06aba8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/239490 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9724 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17as3277: Fix month-off-by-one error for RTC driverJulius Werner
The AS3277 RTC code seems to closely follow the corresponding Linux driver. Unfortunately, while coreboot (and even other parts of Linux, like mktime()) directly follows the standard IBM PC RTC time representation (except for the BCD part), Linux' struct rtc_time decided to use 0-based (instead of 1-based) months instead. This patch removes the faulty month offset that was copied into our driver so that we will generate correct timestamps again. BRANCH=nyan BUG=chrome-os-partner:34108 TEST=firmware_EventLog (pre-release version) gets further than before (and then craps up on unrelated problems with suspend/resume events). Change-Id: Ica221a8bcfd7c1c6cd7ba382d760b586d511e3a3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5b55c3f5bbecc776a71338256b910aecccac1e04 Original-Change-Id: I163fa4778ec534cd9e6f92a6b6dc55e9871a6a82 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/238122 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9723 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17bg4cd: define custom romstage entryDaisuke Nojiri
this change defines a custom romstage entry for bg4cd. the entry code stalls subcores, sets up the stack, and clears the bss before jumping to main. BUG=none BRANCH=tot TEST=built all current boards. booted cosmos p1 Change-Id: Idde43f94555bec7804a16928c58ce673956a39e5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7a35e12eb29b351cc0baaea24344f00d2ba905f6 Original-Change-Id: I9172e873a43847f3ea82cd1d9fd0841f0db83994 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/238022 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17arm: allow custom stage entry codeDaisuke Nojiri
this change defines stage_entry as a weak symbol so that a board can implement custom stage entry code. BUG=none BRANCH=tot TEST=built all current boards. booted cosmos p1. Change-Id: If8f6945ecdc5047558bb6359aa997867e36f33b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 86d5008981d0b01652907baab47a476d784a2ceb Original-Change-Id: Ib43158c4013e6393d86a9aef37cf444a48b9fc79 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/238021 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9721 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
The current display init code causes Brain to crash when trying to allocate resources. This just avoids doing display init if a config variable is set. Once code has been implemented to properly setup different types of displays we can get rid of this hack. BUG=none BRANCH=none TEST=built and booted (to depthcharge) on Brain, compiled for pinky with FEATURES=noclean and ensured config variable is 0 Change-Id: I9a7266c6bff5b7a6eb05b2b21fb65797bee392d6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 804632ca67eaaf4174ca597d83b8923cb9abd1b7 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I04c9e8181c58fa0608fd20776fa8c4798a023474 Original-Reviewed-on: https://chromium-review.googlesource.com/235922 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
This patch activates the chip driver for Winbond SPI flash (which, incidentally, looks 99.9% the same as the Gigadevice driver but still requires some extra 500+ bytes of object code... there's definitely room for improvement here). Shuffle around rk3288 memlayout to make a little more room in the bootblock. BRANCH=veyron BUG=chrome-os-partner:34176 TEST=Booted Pinky. Checked bootblock and verstage memsz of final binary and noticed that both only have less than 500 bytes left against their memlayout boundary. The next piece of code we add will cause some serious headaches... Change-Id: I97ea6ac334104e4219e310afc557c164b2ff19d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8769e5a34ad3cd417132646fbb58ff51c29fb640 Original-Change-Id: Id2f1204c30aa28251cf85cb80d7ca44947388dba Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236977 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9719 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15rk3288: support edp HPD functionhuang lin
we use the delay 200ms to meet the edp power timing request before, it waste time, so we use the HPD function to detect the edp panel now. In previous version, the hardware may not support the edp HPD function, so in the code it will spend 200ms to detect hpd single, if it don't get the hpd single, it will contiue the edp initialization process, to compatible all of the hardware version. BUG=chrome-os-partner:35623 TEST=Boot from Mighty, and display normal BRANCH=None Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6 Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242792 Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: http://review.coreboot.org/9659 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15rk3288: meet the backlight power timing requesthuang lin
backlight timing: LED_VCC->LED_PWM->LED_EN, we modify the code to meet the timing. BUG=chrome-os-partner:36201 TEST=Boot from jerry, and scope the backlight timing BRANCH=None Change-Id: I6bfa6af176400086e4af0112a63127c1152ca70e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 52ac0b2944cea7dc860bfea12fe44851436bb7f7 Original-Change-Id: I6c53a822410ad706383c6d9fa2b5f0437775f710 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/244639 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15veyron_rialto: Change recovery GPIO to PUSH_KEY.Hung-Te Lin
The recovery button on Rialto should be GPIO 255, the LED Push Key. Note we want to keep the recovery button on servo functional because many protos are not assembled and developers can't "push" the push key. The GPIO passed to payloads (and kernel) is only mapped to Push Key. BUG=none TEST=emerge-veyron_rialto coreboot chromeos-bootimage BRANCH=veyron_rialto Change-Id: I66f94cf232caa53a3b28db517620e4b6e9b9af0e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 66ee55f6312efaeb337eb2881cd5eff5365b4105 Original-Change-Id: I0a7ebeed6506fbd938084c9a078a7cf1c7b914b9 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/244515 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9657 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15veyron_rialto: Fix boot failure in romstage.Hung-Te Lin
The FMAP for Rialto has no ecrwhash and would cause verstage to incorrectly load ramstage (instead of romstage) when looking for subsection inside RW blob. We have to override the index of stages to boot correctly. BRANCH=veyron_rialto BUG=none TEST=emerge-veyron_rialto coreboot chromeos-bootimage Boots successfully on Rialto boards. Change-Id: I031703d97a68e42dc17630ab5df85f8cba47e5e5 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 24ba4b16b4a2fe5469296f8d40286ed926cefc3c Original-Change-Id: I637ea23e1e8265781e52367d1306dbf854c2ccad Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/244577 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9656 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15rk3288: set the rk808 BUCK default inductor current to max valuehuang lin
Our use of the bucks may exceed their default maximum inductor current. Just set it to the highest possible value for every buck we configure to avoid problems... the kernel can later fine-tune the values further if needed. (Also some slight grammar updates while I'm in there.) BRANCH=veyron TEST=Build and Boot on Jerry BUG=None Change-Id: If8258cf4feefe191604365405bff1f20c8ab8746 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 065a163bb902b8c96d05bfef6ed4885aa20f31cc Original-Change-Id: I3801cabeb93d7bf7ecc02db0e69d4932c9394db9 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242785 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: http://review.coreboot.org/9655 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15rk3288: Fix failing LPDDR3 reboot testjinkun.hong
tMRD request 10nCK in LPDDR3, we set the DDR_PCTL_TMRD BIT0~BIT2 to generate this signal, but the max value we can set is 7, so the standard can not be met. So, now we send the Mode Register Set command manually, and hence we can add the delay manually. BUG=chrome-os-partner:34608 TEST=loop reboot BRANCH=veyron Change-Id: Id974ab935c2df6ea35dcdd240378ffc68de0204d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: b60a4de6ff3ad3720c2c06ed7de03ed942360e6c Original-Change-Id: I0d29ea9cd82ef018e835ae53090a47d0299ef61d Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242176 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9654 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15rk3288: Fix failing DDR3 reboot testjinkun.hong
We want a reset signal to last 200us. The length of a reset signal is represented by BIT0~BIT16 in DDR_PUBL_PTR2. When DDR memory runs at 667MHz, the calculated value for the reset signal is 0x20850, which is bigger than the maximum value that can be described with 17 bits (0x1ffff). As a result, the memory controller only sees 0x850, which generates a 3.5us reset cycle instead, which violates the standard and negatively impacts memory stability. So instead, we now set it to the maximum value (0x1ffff) to prevent this overflow, resulting in a reset signal of 196us for 667MHz DDR memory. BUG=chrome-os-partner:34875 TEST=loop reboot BRANCH=veyron Change-Id: Ia01f8a0414b49fa3ecf4d543cfa1822e29ee4cc4 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 767a4a3cb8dff47cb15064d335b78ffa5815914d Original-Change-Id: I9b410e1605c87f12a5ca96ead12f8527ca4f417f Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242175 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9653 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15google/veyron_*: Remove unused sdram-ddr-hynix-2GB.inchuang lin
BRANCH=None TEST=Build speedy, pinky, mighty BUG=None Change-Id: If561872274bcdc2652c2bfe80cf5bd0501ad6b64 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e6be62b4e64b13e285eb0480fdc65d814c6dadc0 Original-Change-Id: I7c97d54f3a4c94f7e23d3e85b808cd64b1cacec7 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241939 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9651 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15Jerry: add SAMSUNG K4B4G1646Q-HYK0 ddr3 sdram supportPaul Ma
K4B4G1646Q-HYK0 is a variant of K4B4G1646D-BYK0 with a different physical package and the same config parameters. BRANCH=none BUG=chrome-os-partner:34940 TEST=boot on Jerry board with K4B4G1646Q-HYK0 Change-Id: I485eede309850ef6b3a52e2a548b6b032d281293 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e925d784e1ebe444f5a5bcab47c8a661b0c6c527 Original-Change-Id: I31bcb348a45ff76e8e08127063bd0d04443ccb79 Original-Signed-off-by: Paul Ma <magf@bitland.com.cn> Original-Reviewed-on: https://chromium-review.googlesource.com/241787 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9650 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: support H5TC4G63CFR sdram in jerryhuang lin
BRANCH=None TEST=Boot and run jerry rev2 board BUG=None Change-Id: I95ec99e444c9cff3008bac5d1e6c3365fc2229a0 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f9075e6172d1ae503dc26bac8f1057455dc93c39 Original-Change-Id: Ice60a4576c9eb386599a545c1b8d470e8a2eed68 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236500 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Paul Ma <magf@bitland.com.cn> Original-Tested-by: Paul Ma <magf@bitland.com.cn> Reviewed-on: http://review.coreboot.org/9635 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-04-15veyron: Add veyron_rialto boardjinkun.hong
Derived from of veyron_brain with new memory configuration. BUG=chrome-os-partner:35072 TEST=built and boot on rialto-rev0 boards. BRANCH=veyron Change-Id: I2c6f74d231e39de76ef2399fdb20efae977b34fa Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 17d66e5f58562427badd6973ebb053f58573c040 Original-Change-Id: I8626ff5da8098ca120481b8cda0c6703f806711e Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/238946 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9649 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-15ipq806x: load and start RPMVadim Bendebury
This patch finds the RPM image in the CBFS, loads it as defined by the MBN header and signals to the RPM processor where the image is located and waits for confirmation of the RPM starting. The interactions with the RPM processor are copied as is from the vendor provided sample code. Debug messages added to help identify problems with loading the blobs, should they ever happen. BRANCH=storm BUG=chrome-os-partner:34161 TEST=ramstage reports both TZBSP and RPM starting. Change-Id: I81e86684f9d1b614f2059ee82c6561f9484605de Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bbf2eda04a6e72b4f7b780f493b5a1cea0abfeb7 Original-Change-Id: Ic10af0744574c0eca9b5ab7567808c1b8d7fe0c2 Original-Signed-off-by: Vikas Das <vdas@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236661 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Reviewed-on: http://review.coreboot.org/9692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
Use the apps processor watchdog reset to do a hard reset. The watchdog reset drives the RESETOUT on the chip. Modify register address definitions to be able to use pointers and pointer arithmetics. BRANCH=storm BUG=chrome-os-partner:34334 TEST=the chip resets and the control returns to start of SBL. Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91 Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236141 Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Reviewed-on: http://review.coreboot.org/9691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
Read the TZBSP blob from CBFS and run it. A side effect of the blob execution is switching the processor into User mode. Starting TZBSP requires processor running in Supervisor mode, TZBSP code is compiled for ARM. Coreboot is executing in System mode and is compiled for Thumb. An assembler wrapper switches the execution mode and interfaces between Thumb and ARM modes. BUG=chrome-os-partner:34161 BRANCH=Storm TEST=manual With the preceeding patches the system successfully loads to depthcharge in recovery mode. Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2 Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948 Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229026 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9690 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: adjust rombase startup to vboot2Vadim Bendebury
Memory needs to be initialized before rombase proceeds. BRANCH=storm BUG=chrome-os-partner:34161 TEST=boots into depthcharge Change-Id: Id16b17685ff15c2a69d630eb8042e15549ae8b21 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e8aeb38206b806d5656052d0f210faa769e28b8 Original-Change-Id: I0616c7dc7f08332ac0d96d4baf2618b067606fdf Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234544 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9689 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: use different CBFS caches before and after DRAM is availableVadim Bendebury
Booting depthcharge requires much larger CBFS cache, but by the time depthcharge is being booted DRAM is already initialized. Use different memory spaces for CBFS cache before and after DRAM is available. Also, make sure that CBMEM uses memory below CBFS cache in DRAM. BRANCH=storm BUG=chrome-os-partner:34161 TEST=with this change on Storm ramstage finds and boots depthcharge in recovery mode Change-Id: Icd1bbf4bcc5f9d92b2653b5a8891409105a25353 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e1e0b029b7fb09b84784373150cc4ce9eea7b3f5 Original-Change-Id: I33fd97806b2db6fab2adc44b67e5f54258642967 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234543 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9688 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: configure/enable vboot2 supportVadim Bendebury
Select vboot NV driver. BRANCH=stotm BUG=chrome-os-partner:34161 TEST=with caches disabled Storm starts up and initializes DRAM successfully. Change-Id: Ib2e509e0c32a7a836a0fc6c0d5d05cc9bf68cbf6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a4cf8b26be99b04774ee3d1eb4b28039813e020 Original-Change-Id: Ie220aade420e1e54e2fa46295d03af494466ab43 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234645 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9687 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor) and ddr.mbn (actual memory initialization code). Pointer to CDT which starts right above the MBN header is passed to the memory initialization routine. Zero return value means memory initialization succeeded. BRANCH=storm BUG=chrome-os-partner:34161 TEST=with upcoming patches memory initialization succeeds. Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234644 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: add i2c driverVadim Bendebury
this change ports i2c and other relevant drivers from depthcharge for ipq806x. BUG=chrome-os-partner:33647 BRANCH=ToT TEST=Booted storm using vboot2 Change-Id: I3d9a431aa8adb9b91dbccdf031647dfadbafc24c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a0c615d0a49fd9c0ffa231353800882fff6ab90b Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Id7cc3932ed4ae54f46336aaebde35e84125ebebd Original-Reviewed-on: https://chromium-review.googlesource.com/229428 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
This change sets up the list of source files for vboot2's verstage without enabling it. BRANCH=storm BUG=chrome-os-partner:34161 TEST=not much testing yet, just successful compilation. Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364 Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234643 Reviewed-on: http://review.coreboot.org/9684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: modify imem layoutDeepa Dinamani
With introduction of uber-sbl SRAM usage pattern is changing, this introduces the new memory layout. This patch overlays DDR initialization code with uber-sbl, as uber-sbl goes out of scope as soon as bootblock starts. A 4K block at offset 0x3f000 added in the comments, this is a shared structure used by different QCA modules. This suggested layout is not final, but will allow to move closer to the production image. BRANCH=storm BUG=chrome-os-partner:34161 TEST=with other patches applied Storm boots all the way to rombase and initializes DRAM. Change-Id: I46af81b39b09935aa7fffdabda223e7e64c7a446 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a20c0570361038c0ae406dcb1f4bc657eea120f6 Original-Change-Id: I927f6ffc524fc8f0effd7b91d3f5d1e8d6be1530 Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229023 Reviewed-on: http://review.coreboot.org/9683 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15soc/ipq806x: Disable LPAE mode.Deepa Dinamani
LPAE (large physical address extension) is not available on this SOC core, do not enable it. [pg: we already had this one, but somehow LPAE slipped in again] BUG=chrome-os-partner:27784 TEST=coreboot still comes up on AP148 Change-Id: Iaa80022c611f7377d8f4100487d32654150836d8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e6e12c39efd54e4fcbd444134bf30e211948a71b Original-Change-Id: I9e9ad1aeaf613f04987c0c306a574085042d0e7b Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198023 Original-Reviewed-by: deepa dinamani <deepad@quicinc.com> Reviewed-on: http://review.coreboot.org/9682 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15storm: add code for detecting rec/dev/write protect switches' statusDaisuke Nojiri
The gpio access code has been moved to a separate file to match other platforms. Accessor functions are added to read different switches state. They will be read by verstage, when it is enabled, and by ramstage, for passing the values to depthcharge. It is unfortunate that the gpio values are not being cached and can change by the time CBMEM table is filled, but we have to live with that for now. BUG=chrome-os-partner:33756,chrome-os-partner:34161 BRANCH=storm TEST=none yet. Change-Id: I229fed0e35d643912f929671d5fc25aee5d1d167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e15aa281a1dbf2c463650b6c04991436022d8d4 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I940b54cd3cf046b94d57d59d370e634a70a8bbeb Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229426 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9681 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15ipq806x: set architecture to ARMV7Vadim Bendebury
BUG=chrome-os-partner:33646 BRANCH=ToT TEST=Built storm. Change-Id: I4b2cb54369dee7e6e61c2173d2be0f50430123fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0aab7fe31b78bae264cc2e6fa04fe7047315d08f Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Ic509e1fd375a320b8e37a07a7f5b9a6fa211ace3 Original-Reviewed-on: https://chromium-review.googlesource.com/229427 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9680 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-15broadwell: Fixes for _SWS supportDuncan Laurie
- These should be 64bit values so when they try to return -1 it is interpreted properly by the kernel. - The GPE value needs to be reset at the start so it does not return stale data from a previous resume. - If a GPE register is zero the value should only be updated if it has not yet found a set bit. BUG=chrome-os-partner:34532 BRANCH=samus,auron TEST=build and boot on samus, suspend/resume with various wake sources and ensure the reported _SWS values are correct in every case. Original-Change-Id: Ic6897f20ad2f321f3566694c032b75a3db120556 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/235012 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit be3c79b87b81563f744eb885708a52730debaccb) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I801c6e4f90dde0f5f69685f987a9831ee5e99e4a Reviewed-on: http://review.coreboot.org/9699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-15broadwell: Remove unused bootblock codeDuncan Laurie
This code that stores the initial timestamp is not being used, instead the timestamp is passed to romstage_main(). BUG=chrome-os-partner:28234 BRANCH=samus,auron TEST=build and boot on samus Original-Change-Id: I0e0fa1ba74ab93d4454fdfa12208e712d2ae913c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234402 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit 838112cf79e2b4d51e5dc87d5ac9cd7e03807f29) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8fd7ba72c14c1e39f7bfa3a1ae8d03289a2abf73 Reviewed-on: http://review.coreboot.org/9698 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-15broadwell: Clean up ME device and add new ME10 flowDuncan Laurie
In order to avoid a 300ms timeout waiting for mbp_cleared flag to be set there is a new flow for the ME10 1.5MB firwmare that we can follow which will save significant boot time. This requires sending new commands that do not generate an ACK message, and ensuring an HMRFPO LOCK message is sent. In addition now that the delay is removed clean up the ME path to do the work in init() step and add a final() step that does the disabling of the PCI device. BUG=chrome-os-partner:30637,chrome-os-partner:34134 BRANCH=samus,auron TEST=build and boot on samus, measure ~300ms speedup in boot time Original-Change-Id: I753087ecd65f6ebed9f812318a359f893e01da9f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234400 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 25aff4b188dc94a99af30869a162e01e3fa8dee7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia35373548a902a718155a1a57057f55067d2f3ac Reviewed-on: http://review.coreboot.org/9697 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-15soc/baytrail: Use microcode from the blobs repositoryMarc Jones
Remove the blobs from the coreboot tree and get them from 3rdparty. Change-Id: I0798091530be9654d7e073839b4efeb3f9c0302c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/9694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-04-15soc/broadwell: Use microcode from the blobs repositoryMarc Jones
Remove the blobs from the coreboot tree and get them from 3rdparty. Change-Id: I4938b5c47e6ae7059eda144b664aeafdd674f0fb Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/9693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-04-15veyron: Add "backlight" GPIO to coreboot tableJulius Werner
This patch adds a new "backlight" output GPIO to the coreboot table in order to avoid redundantly defining that GPIO in the payload. BRANCH=veyron BUG=chrome-os-partner:34713 TEST=Tested together with corresponding depthcharge CL. Change-Id: Ia997beb1a400136ad65d8f0217781c9782f6e8a5 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 04ce4c23573cf926aeef3d817d3ab00835f897c7 Original-Change-Id: I69b3c7ac6be4b9723b6a0dfecef5e1c4ea681aff Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242400 Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9652 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15brain: remove sdmmc_power_off() in romstageDavid Hendricks
LDO4 and LDO5 are not turned on with the boot0 and boot1 RK808 strappings that we use on Brain. BUG=none BRANCH=none TEST=built and booted on brain Change-Id: I00393ca54958d9fff926606405edcd84901e4048 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c4c1862585fd058a8a9c8237c701b3bbf3b8aa83 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I846ef9d67a780cc07414d545524b9ec0b8490cf1 Original-Reviewed-on: https://chromium-review.googlesource.com/241734 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9648 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_danger: Enable EDP display initDavid Hendricks
Danger has EDP, the original code was copied from Brain which didn't. BUG=none BRANCH=none TEST=built and booted on danger Change-Id: Ib8e48078cc51fe0e1fb7049f70e810b8f0a7690a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 25fc6b4d82fb4bd80798cc809af4dacc6208109e Original-Change-Id: Ic8b3f685e08bb96125c57d42db6a10e348a1a096 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/245161 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9679 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Danger: Apply differences between Brain and DangerDavid Hendricks
This applies the differences between Brain and Danger: - Danger has an SDMMC slot - Danger has a USB hub (TODO) - Danger has LVDS (TODO) - Add workaround for incorrect RAM_ID strapping BUG=none BRANCH=none TEST=emerge-veyron_danger coreboot works Change-Id: Idec527744de2583613b290e3e88850b33ff1c23d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 89278c2eeae4bae989a3549da627c5bbd5dd0d5a Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Iae3f85d4f41e04465a5046f2334c693337d006a4 Original-Reviewed-on: https://chromium-review.googlesource.com/241712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9647 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Danger: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Brain along with build-related changes so that emerge-veyron_danger works. The next patch will account for other differences. BUG=none BRANCH=none TEST=emerge-veyron_danger coreboot works Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068 Original-Reviewed-on: https://chromium-review.googlesource.com/241711 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15rk3288: send correct EDID buffer sizehuang lin
decode_edid() parses the whole EDID buffer, regardless of whether there is an extension buffer, so we pass the size of the EDID actually read to prevent EDID parser getting the wrong data. BUG=chrome-os-partner:35053 TEST=Boot from jerry BRANCH=veyron Change-Id: I5951b670f129cf4765a5199cb58ac6abff5478a6 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 4d508647efc0a9d48b2a4b23c12a54b63af2813e Original-Change-Id: I8cd8e09025520322461fe940b01e4af3995b5ecd Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/240643 Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: http://review.coreboot.org/9645 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15rk808: Implement RTC driverDavid Hendricks
This adds RTC functions to the existing RK808 driver. BUG=chrome-os-partner:34436 BRANCH=none TEST=with eventlog patches applied to pinky, booted and saw eventlog entries generated with correct timestamps: localhost ~ # mosys -k eventlog list entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096" entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0" entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode" Change-Id: I1df70a2ca94ff463ffea8d9f02d951d6c62e6b08 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a304f7e6954f585f04feef54c4902dcb25a39fcc Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I3a240e342a54b2e7023da71708d0d70f5131f0b9 Original-Reviewed-on: https://chromium-review.googlesource.com/238525 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9643 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
This moves PMIC_BUS from each mainboard's board.h file to a per- mainboard Kconfig variable. To prevent humans from forgetting to set a valid value, an invalid default is set in the rk3288 Kconfig and checked in rk808.c so that compilation will fail if the mainboard Kconfig does not override it. Originally, PMIC_BUS was only used by mainboard code as an argument to RK808 PMIC functions. To conform to the generic RTC API, however, the RK808 code needs to have the bus number globally defined somewhere since the rtc_get() and rtc_set() functions don't take any args. Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass bus number to the PMIC functions. BUG=chrome-os-partner:34436 BRANCH=none TEST=built and booted on Pinky Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55 Reviewed-on: https://chromium-review.googlesource.com/240203 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9642 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15rk3288: Implement support for CRYPTO module and use it in vboot hashingJulius Werner
This patch implements support for the CRYPTO module in RK3288 and ties it into the new vboot vb2ex_hwcrypto API. We only implement SHA256 for now, since the engine doesn't support SHA512 and it's very unlikely that we'll ever use SHA1 for anything again. BRANCH=None BUG=chrome-os-partner:32987 TEST=Booted Pinky, confirmed that it uses the hardware crypto engine and that firmware body hashing time dropped to about 1.5ms (from over 70ms). Change-Id: I91d0860b42b93d690d2fa083324d343efe7da5f1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e60d42cbffd0748e13bfe1a281877460ecde936b Original-Change-Id: I92510082b311a48a56224a4fc44b1bbce39b17ac Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236436 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: http://review.coreboot.org/9641 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: add H9CCNNN8GTMLAR sdram in speedyJiazi Yang
BRANCH=None TEST=emerge-veyron_speedy coreboot BUG=None Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729 Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/237544 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Trybot-Ready: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9640 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Speedy v1 hardwarehuang lin
BUG=None TEST=emerge veyron_speedy and boot the Speedy board BRANCH=None Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409 Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234715 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9639 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Brain: Apply differences between Jerry and BrainDavid Hendricks
This applies the differences between Jerry and Brain: - No EC - No SD card - Minor changes to GPIOs (no lid, power button active low) - No variations between board IDs (yet) - No backlight/display attached, but we do have some HDMI and VOP configuration (need to double check that it's right). BUG=none BRANCH=none TEST=built and booted on Brain (requires follow-up CL to get into depthcharge) Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105 Original-Reviewed-on: https://chromium-review.googlesource.com/235921 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9638 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Brain: Initial mainboard importDavid Hendricks
This adds a directory with files copied over from Jerry, in addition to build system related changes (configs/* and Kconfig stuff) necessary to emerge-veyron_brain coreboot. The next patch will account for differences between Jerry and Brain. BUG=none BRANCH=none TEST=emerge-veyron_brain coreboot works Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36 Original-Reviewed-on: https://chromium-review.googlesource.com/236989 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9637 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15blaze: add new Micron 2GB BCTNeil Chen
This BCT table is the same as "ramcode == 1", and has been pass the stress test with this new Micron type. -Micron MT41K256M16LY-107:N, ramcode = 4 BUG=chrome-os-partner:32071 TEST=emerged coreboot, booted successfully into kernel. Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6 Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2 Original-Signed-off-by: Neil Chen <neilc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236514 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9636 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Fix TPM I2C initialization and sync boardsJulius Werner
Due to a missing i2c_init(), we were actually running our TPM with default divisors at 660KHz. Oops. While it's commendable that both the TPM and our controller seem to have been running fine all this time at more than 1.5 times the maximum frequency they support, we should probably still get that fixed. Also sync Speedy back up to the other Veyron boards since it seems to have missed a recent SDMMC patch. BRANCH=None BUG=None TEST=Booted Pinky. Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49 Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236580 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9634 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
This switches all the rk3288 platforms to use the common CBFS wrapper instead of implementing its own CBFS media driver. It also happens that veyron_* platforms use Gigadevice SPI flash (at least for now). As we use more SPI-related stuff, for example eventlog and vboot data in Brain's case, we will need to use more of the SPI API anyway. This prevents us from having to duplicate pieces of it for rk3288. BUG=none BRANCH=none TEST=built and booted on Pinky Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b Original-Reviewed-on: https://chromium-review.googlesource.com/235882 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9678 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-04-15veyron: Support Mighty v1 hardwarehuang lin
BUG=None TEST=emerge veyron_mighty and boot the Mighty board BRANCH=None Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53 Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234714 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9633 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Jerry v3 hardwarehuang lin
BUG=None TEST=emerge veyron_jerry and boot the Jerry board BRANCH=None Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234713 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9632 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Support Pinky v4 hardwarehuang lin
BUG=None TEST=emerge veyron_pinky and boot the Pinky board BRANCH=None Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9631 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
We use the devicetree to pass the backlight control gpio before, but if there have different board version, and it uses different io to control backlight, it will hard to distinguish it. So, we move the backlight control to mainboard, and use board_id to distinguish the backlight control. BUG=None TEST=emerge veyron_pinky and Boot the pinky board BRANCH=None Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3 Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/234711 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9630 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
Like Nyan, Veyron boards use a GPIO to reset the system so that we can make the accompanying TPM reset secure and unforgeable. The normal kernel reboot driver knows that, but the SoC-internal watchdog doesn't. This patch implements a check for the global reset status register in the early bootblock and triggers a hard_reset() when it matches "first global watchdog reset" or "second global watchdog reset". Seems that the difference between the two is is a choice controlled by wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both cases. BRANCH=None BUG=chrome-os-partner:33141 TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end up in recovery without this patch but can boot normally with it. Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7 Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231734 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9629 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron_speedy: Support Samsung-4GB and Lynix-4GB LPDDRhuang lin
Add the Samsung-4GB and Hynix-4GB LPDDR inc files. Use ram_id 1000 correspond to Samsung-4GB LPDDR and use ram_id 1001 correspond to Hynix-4GB LPDDR. BUG=chrome-os-partner:33269 TEST=Boot veyron_speedy normal BRANCH=None Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233859 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9628 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Add veyron_speedy boardhuang lin
Essentially a copy of veyron_jerry for now BUG=chrome-os-partner:33269 TEST=emerge-veyron_speedy coreboot BRANCH=None Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639 Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233822 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9627 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
The only way to reliably reset an SD card in an unknown state is by power-cycling. Since a kernel may crash and reboot at any point, SD cards may be left in one of them fancy high-throughput modes that depthcharge (or, in fact, a newly booting kernel without prior knowledge) doesn't support, so we need to reset the card on every boot. This patch adds support to turn off an RK808 regulator completely and uses that to turn off SD card power rails in early romstage. The time until configure_sdmmc() in ramstage turns them back on should be more than enough to drain the power rail for an effective power-cycle. BRANCH=None BUG=chrome-os-partner:34289 TEST=Booted a Pinky from SD card, noticed that it works before and after this patch. Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96 Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233713 Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9626 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
This function was added in upstream but was missing in Chromium OS Change-Id: I35debf65153e5f280343eebfe91438ecf665ba22 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9677 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Kconfig: Fix incorrect CONFIG_STACK_SIZE values for X86 and ARM64Julius Werner
Commit 54229a7 (arm: Fix checkstack() to use correct stack size) didn't quite hit the mark. Due to the crazy way our Kconfig includes work, It accidentally set CONFIG_STACK_SIZE to 0 even on architectures that need it. This patch fixes the issue by moving everything back to a single entry in src/Kconfig, making sure we end up with the intended numbers on all architectures. BRANCH=None BUG=chrome-os-partner:34750 TEST=Built for Pinky, Urara, Falco and Ryu. Confirmed that the generated .config contained CONFIG_STACK_SIZE=0x0 for the former two, and CONFIG_STACK_SIZE=0x1000 for the latter. Original-Change-Id: Ib18561925aafe7c74e6c4f0b10b55000a785e144 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236753 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit c64b127e163f98162f3f7195b6ed09bd5a4b77c4) Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I2c747b04760bc97f43523596640bfb15317e5730 Reviewed-on: http://review.coreboot.org/9696 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-04-14Add console wrapper for UART driverVadim Bendebury
Coreboot is designed to have a single serial console at most, on top of that it may have a CBMEM (virtual) console. Matters are complicated by the fact that console interface is different between bootblock and later stages. A linker list of console driver descriptors is used to allow to determine the set and type of console drivers at compile time. Even though the upstream seems to have done away with this approach, which does not seem the best idea. As an alternative this patch introduces a common wrapper which different UART drivers can plug in into. The driver exports a single API which can be used both directly (in bootblock) and through the wrapper (in later stages). The existing drivers can be adjusted to fit this scheme one by one. The common UART driver API also aligns fine with the upstream approach. BUG=chrome-os-partner:27784 TEST=none yet Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196660 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Reviewed-on: http://review.coreboot.org/7872 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14libpayload: avoid hanging on make junit.xmlPatrick Georgi
make oldconfig doesn't like 'y' as response to a choice item such as the architecture list. An empty response, however, is acceptable, so use that. Change-Id: Ic3164dd3f40e4a7f5d91e3a7008893655cd69ac2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9676 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
This adds the TPM device to the devicetree and configures an active high edge triggered interrupt at IRQ10 and adds the ACPI Device for the TPM into the DSDT. It also cleans up the EC PNP ID to use the EISAID for an EC since there are now two PNP devices declared, and removes the unused ENABLE_TPM define at the top of the DSDT. BUG=chrome-os-partner:33385 BRANCH=samus TEST=build and boot on samus, ensure TPM is functional at IRQ10 CQ-DEPEND=CL:226661 Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86 Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226663 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
This is not a standard feature so it should be included by the mainboard if it is actually present in a system. BUG=chrome-os-partner:33385 BRANCH=samus,auron TEST=build and boot on samus CQ-DEPEND=CL:226663, CL:226664 Change-Id: Id4d0e5ed243dcb95e64fb8c848667f651b75aa4e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8909913f5c11c5805c77a3373859634b02a301e2 Original-Change-Id: Ib7c171a5a007a2dddfb3d80341c6dc488e383e99 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226662 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9470 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
Since CL:226662, all TPMP accessing should be removed as well, else it will cause wtm2 coreboot failed on build. BUG=none BRANCH=none TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot CQ-DEPEND=CL:226662 Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3 Original-Signed-off-by: Harry Pan <harry.pan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/232165 Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9477 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
This change is made only to make sure there is a good signal strength on the SPIM lines. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/249732 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9675 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982 Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250451 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; I2C0 clock is set up properly. BRANCH=none Change-Id: I15ffc5f7d8e8aadfc3cd249284bc492d0d13d9a1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6404ab6ad12ea1579eaf5ae55a9eddd9bd9f96e2 Original-Change-Id: Iafdf492291b47f0088f3b5e621d630b8d21ab106 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250450 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9673 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: modify timer to account for CPU counter overflowIonela Voinescu
Extended the 32bit CPU counter to 64bit by adding a static variable that takes into account CPU counter overflow. The varibale is updated everythime the timer_raw_value function is called so I assume that the function is called often enought to not miss an overflow of the CPU counter. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works as expected BRANCH=none Change-Id: I98bcc56e600dcff0c6da7c140dd34faec5e00885 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 972b105f950d800fa44f27bce090f6b89a5a84b9 Original-Change-Id: Id67b14e9d9c2354bc417b6587b615d466690c9b7 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/247642 Original-Reviewed-by: Daniel Ehrenberg <dehrenberg@chromium.org> Reviewed-on: http://review.coreboot.org/9672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
The current MIPS PLL is configured in such a way that there is excessive jitter. Correct this by applying new PLL settings. The resultant frequency is 546MHz instead of 550MHz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board as part of the JTAG loading script; BRANCH=none Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0 Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245620 Original-Reviewed-by: James Hartley <james.hartley@imgtec.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: http://review.coreboot.org/9671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
The base address used was TOP CLOCK control address instead of the PERIPH CLOCK CONTROL. That was incorrect and is fixed with the current patch. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; now the hash accelerator, fed by this clock, is correctly clocked at 200MHz. BRANCH=none Change-Id: I0ead3951dc1dfc872881b8d1ae9b63f8104af50d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 871cb50ca43a6c760f346eb447e8ff102d8ca0b6 Original-Change-Id: I198d64f97a85a6fcf00c3853bf23d2d767e0e631 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245313 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9670 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077 Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243215 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested in Pistachio bring up board; previous delay at the beginning of bootblock is fixed. BRANCH=none Change-Id: I30335677c96bfd651bc49e36b562c48588009d67 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9 Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243223 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
Some of the asserts were not done properly: the value has to be shifted before is matched with the mask. Added condition to exit while loop for USB clock setup. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; after this patch is applied none of the asserts fail and the code is executed properly. BRANCH=none Change-Id: Ib3aae9f7751a9f077bc95b6e0f9d63e3e16d8e4b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 96999a4322ba98e87bc6746ad05b30cc56704e2e Original-Change-Id: I8d2d468d618ca1ffcb1421409122482444e6d420 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243214 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9667 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
BUG=chrome-os-partner:31438 BRANCH=none TEST=built and booted on urara w/ follow-up patches Change-Id: I3b03ce937e68539343e58b01e3bb714dd1f8c2dd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9493c57a14c8ab074baac1c065c6f39050dd9b2f Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8e50c99913ea155ba0d5699f4789c1fe38b46808 Original-Reviewed-on: https://chromium-review.googlesource.com/243210 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/9666 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
With the added code for clock and MFIOs setup, bootblock now exceeds 16KB. This patch increases the allowed limit to 18KB. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works as expected BRANCH=none Change-Id: I166f882bd3db446bcd6f9e1f828cab22266c6ac7 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: da95db5ed348419b7905dc1ab68fd64d7b2eb5e0 Original-Change-Id: I0cacc6163f21ae3673c2716b12dde66bd48290f9 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243213 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9665 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
As the payload increases in size, a bigger CBFS cache is required. Therfore, bootblock, romstage and the cbfs cache were placed in GRAM (128 K) and the stack and cbmem console were moved to SRAM (64 K). With the exception of CBFS cache, the sizes of all the other regions remains the same. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; behavior was as expected. BRANCH=none Change-Id: I19857f785ca1514f7483d582c7ad6ee470a8fefc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c895660dbdcd113bdc9d832beab30886313c28d6 Original-Change-Id: I004f8f081d04f83e3f5cee969e50803685cfdf67 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236551 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9664 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
When using this mode data is received and transmitted on the same edge of the SPFI clock, which allows for higher frequencies of operation. In this mode the maximum supported frequency is 50Mhz. If this mode is not enabled the maximum supported frequency is 25Mhz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; the SPFI hardware block is fed by the system clock (with a fixed freqency of 400 MHz). To achieve the SPFI frequency of 50MHz the internal divider of SPFI must be set to 64. To achieve a frequency of 25 Mhz the internal divider must be set to 32. A value of 64 = division by 8 A value of 32 = division by 16 BRANCH=none Change-Id: Ifd5f739b6157b99e4c1f92b5bb72615ee610ae6c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8b6cce616ec7926682d4eff096563acf1dfd6c65 Original-Change-Id: I337b6fcf462bcf6021ca77a8b1133cf49140ba76 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241425 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9663 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
Set elements: - UART1 clock dividers and MFIOs - SPIM1 clock dividers and MFIOs - USB clock dividers - System clock divider - System PLL - MIPS CPU PLL BUG=chrome-os-partner:31438 TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB have proper functionality. BRANCH=none Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151 Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241423 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14arm64: Increase dma region size to 32MiBFurquan Shaikh
BUG=None BRANCH=None TEST=Download and write to kernel partition successful on ryu Change-Id: I9623a0a430e95633dabbb87537a5c70bc9619dde Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3ba52d7c7baa42de3149cc604423a5825988401e Original-Change-Id: Ia6ba5ad52596c32cc3ad42f98c7f4f8b3e13d6c5 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/242205 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9661 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-04-14tegra132: lock down VPRAaron Durbin
The GPU MMU won't function properly until it sees the VPR is locked down. Therefore, do the appropriate work. BUG=None BRANCH=None TEST=Built. Change-Id: I6011c75c1e6c231f2fa416e0057cb5805a88a2bb Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ca9cc9917b98a148442468d1d1541a0408ab6c2c Original-Change-Id: I3601f419b561cee392391577ef8db66b9fbd8c1b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242910 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-on: http://review.coreboot.org/9660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload dwc2: use bus addresses for buffersIonela Voinescu
The address of the output buffer sent to the device should be the bus address and not the virtual address. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; USB works properly after this change BRANCH=none Change-Id: I5c9d199e17c3f4303095ad73f4980d32d04c6118 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 942c385c112c2a4e409da806548081d3e2f8f438 Original-Change-Id: I0c06196501a968a72cb3f2c7dd1027bb22cdaada Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245387 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9455 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload dwc2: Use a new FIFO allocation methodhuang lin
Total FIFO length is split into 512 byte blocks. Allocate these blocks to GRXFSIZ and GNPTXFSZ evenly. This method avoids hardcoding and makes the FIFO size value work for dwc2 controllers that have a different FIFO ram size. BUG=chrome-os-partner:32634 BRANCH=None TEST=Boot kernel from USB Change-Id: I78ce0fa4c4600fb56c991874a93bdd6674e648c2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5645a25e95f84359cd10fc9fcf56e1f73fd6ce87 Original-Change-Id: Ib50a08c193f7f65392810ca3528a97554f2c3999 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233119 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9454 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14libpayload: Add dwc2 usb driverhuang lin
BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/211053 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14rush: Enable dp displayJimmy Zhang
Add dp/sor supporting functions to enable dp panel. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I1cc5a95ef5e3ea7cc701c1cb124a7eb5a5dbd872 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 795a7cddd36bd783cfdd6f1d3f7092bf48ebd8e7 Original-Change-Id: I336336dbbc5a772eec19ba96db8e7b50f6ea1497 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238945 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9616 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
This change is intended for code sharing. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: Ib83106f1c2d83c1d98b38567626f3169f2aec626 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9f7414132aaaa6a98663852219e17acbe919d704 Original-Change-Id: Idedb0c16e33a630c954c04767592c3a75c49944b Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238944 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9615 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
Add and call display shift clock divider function to set shift clock divider. This change is also intended for code sharing on dc settings. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: I9ad1b32de50395720355bb2d00f5800c7f6c4b73 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24a72fa3411652d54ae1f7d69db0a7293aad7877 Original-Change-Id: I01582c6863d31627ac93db9fddda93f4f78249cd Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238943 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9614 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
DP panel parameters generally can be retrieved thru edid. The parameters specified here will be used when edid fetching failed. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5 Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: Add dp related parametersJimmy Zhang
Add these parameters so that they can be specified in devicetree. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: I77ee16263e1ce6a8c32b3cd203c1b8a499514a8e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3b254936e696f81ca7eeeb7f6968a5350352b59 Original-Change-Id: Iba47afe95c3889047a82582730be7a253fae76e7 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238940 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9611 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14arm: Fix checkstack() to use correct stack sizeJulius Werner
checkstack() runs at the end of ramstage to warn about stack overflows, and it assumes that CONFIG_STACK_SIZE is always the size of the stack to check. This is only true for systems that bring up multiprocessing in ramstage and assign a separate stack for each core, like x86 and ARM64. Other architectures like ARM and MIPS (for now) don't touch secondary CPUs at all and currently don't look like they'll ever need to, so they generally stay on the same (SRAM-based) stack they have been on since their bootblock. This patch tries to model that difference by making these architectures explicitly set CONFIG_STACK_SIZE to zero, and using that as a cue to assume the whole (_estack - _stack) area in checkstack() instead. Also adds a BUG() to the stack overflow check, since that is currently just as non-fatal as the BIOS_ERR message (despite the incorrect "SYSTEM HALTED" output) but a little more easy to spot. Such a serious failure should not drown out in all the normal random pieces of lower case boot spam (also, I was intending to eventually have a look at assert() and BUG() to hopefully make them a little more useful/noticeable if I ever find the time for it). BRANCH=None BUG=None TEST=Booted Pinky, noticed it no longer complains about stack overflows. Built Falco, Ryu and Urara. Change-Id: I6826e0ec24201d4d83c5929b281828917bc9abf4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 54229a725e8907b84a105c04ecea33b8f9b91dd4 Original-Change-Id: I49f70bb7ad192bd1c48e077802085dc5ecbfd58b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/235894 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
Freeing up memory on rk3288 is like squeezing water out of a stone right now, but I still managed to get a few drops here and there. Let's hope this will be enough. BRANCH=None BUG=None TEST=Pinky builds and boots again. memsz is ~15K in bootblock and ~39K in verstage. Change-Id: Icf7ff3369bf367426a34f1490e0a041ae9bd6367 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a3737ab535cdef228a1607433860f881db04412 Original-Change-Id: I90d9eab5b5d3af7a2e4b836a9c7b735b7c1c48e6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/235870 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9609 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timestamps: You can never have enough of them!Julius Werner
Now that we have timestamps in pre-RAM stages, let's actually make use of them. This patch adds several timestamps to both the bootblock and especially the verstage to allow more fine-grained boot time tracking. Some of the introduced timestamps can appear more than once per boot. This doesn't seem to be a problem for both coreboot and the cbmem utility, and the context makes it clear which operation was timestamped at what point. Also simplifies cbmem's timestamp printing routine a bit, fixing a display bug when a timestamp had a section of exactly ",000," in it (e.g. 1,000,185). BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Falco, confirmed that all timestamps show up and contained sane values. Booted Storm (no timestamps here since it doesn't support pre-RAM timestamps yet). Change-Id: I7f4d6aba3ebe3db0d003c7bcb2954431b74961b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7a2ce81722aba85beefcc6c81f9908422b8da8fa Original-Change-Id: I5979bfa9445a9e0aba98ffdf8006c21096743456 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234063 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9608 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
Since we can now reduce our vboot2 work buffer by 4K, we can use all that hard-earned space for the CBMEM console instead (and 4K are unfortunately barely enough for all the stuff we dump with vboot2). Also add console_init() and exception_init() to the verstage for CONFIG_RETURN_FROM_VERSTAGE, which was overlooked before (our model requires those functions to be called again at the beginning of every stage... even though some consoles like UARTs might not need it, others like the CBMEM console do). In the !RETURN_FROM_VERSTAGE case, this is expected to be done by the platform-specific verstage entry wrapper, and already in place for the only implementation we have for now (tegra124). (Technically, there is still a bug in the case where EARLY_CONSOLE is set but BOOTBLOCK_CONSOLE isn't, since both verstage and romstage would run init_console_ptr() as if they were there first, so the romstage overwrites the verstage's output. I don't think it's worth fixing that now, since EARLY_CONSOLE && !BOOTBLOCK_CONSOLE is a pretty pointless use-case and I think we should probably just get rid of the CONFIG_BOOTBLOCK_CONSOLE option eventually.) BRANCH=None BUG=None TEST=Booted Pinky. Change-Id: I87914df3c72f0262eb89f337454009377a985497 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 85486928abf364c5d5d1cf69f7668005ddac023c Original-Change-Id: Id666cb7a194d32cfe688861ab17c5e908bc7760d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232614 Reviewed-on: http://review.coreboot.org/9607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 02:16:50 +0000