summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28chromeos: Remove old MOCK_TPM referencesJulius Werner
The correct way to mock out vboot TPM accesses these days is the CONFIG_VBOOT_MOCK_SECDATA Kconfig option. There are some remnants of older TPM-mocking infrastructure in our codebase that are as far as I can tell inert. Remove them. Change-Id: I3e00c94b71d53676e6c796e0bec0f3db67c78e34 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18977 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-28arm64: Fix verstage to use proper assembly versions of mem*()Julius Werner
Due to an unfortunate race between adding verstage support and reverting an earlier hack that disabled the optimized assembly versions of memcpy(), memmove() and memset() on ARM64, it seems that we never enabled the optimized code for the verstage. This should be fixed so that all stages use the same architecture support code. Change-Id: I0bf3245e346105492030f4b133729c4d11bdb3ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18976 Tested-by: build bot (Jenkins)
2017-03-28abuild: Treat command line for recursive invocations as bash arrayJulius Werner
This fix changes the $cmdline variable that is used for recursive parallel abuild invocations through xargs from a string to a true bash array (like $@). This allows bash to properly preserve and pass on whitespace in parameters, like you get from invocations such as: util/abuild/abuild -c 32 -t "MY_FIRST_BOARD MY_SECOND_BOARD" Also add a mechanism to better spread CPUs across targets, since otherwise we can leave a lot of CPUs idle if we're trying to build only a few boards in parallel. Change-Id: I76a1c6456ef8ab21286fdc1636d659a3b76bc5d7 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18975 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/apollolake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I01a24e2d4f1c8c9ca113c128bb6b3eac23dc79ad Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18567 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-28soc/intel/skylake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I0fa0a60f680b9b00b7f26f1875c553612b123a8e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18566 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/common/block: Add Intel common systemagent supportSubrata Banik
Create common Intel systemagent code. This code currently contains the SA initialization required in Bootblock phase, which has the following programming- * Set PCIEXBAR * Clear TSEG register More code will get added up in the subsequent phases. Change-Id: I6f0c515278f7fd04d407463a1eeb25ba13639f5c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18565 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/pci_devs.h: Use consistent naming in soc/pci_devs.hSubrata Banik
This patch to make common PCI device name between APL and SKL. Change-Id: I5e4c7502e9678c0a367e9c7a96cf848d5b24f68e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/apollolake: Clean up code by using common CAR initSubrata Banik
This patch currently contains common CAR initialization required in bootblock phase along with common MSR header - 1. Use SOC_INTEL_COMMON_BLOCK_CAR to have common CAR initialization and CAR teardown. 2. Use common MSR header "intelblocks/msr.h" inside soc/cpu.h Change-Id: I67f909f50a24f009b3e35388665251be1dde40f7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18555 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/common/block: Add cache as ram init and teardown codeSubrata Banik
Create sample model for common car init and teardown programming. TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED and CAR_NEM configs till post code 0x2a. Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28lenovo/g505s: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I857486cb80bc01e695ac9592a0a0dc577dfc0d12 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28msi/ms7721: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I0322fb69455cf6e196c0f6c6221bef806f1aa989 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18713 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/torpedo: Switch away from AGESA_LEGACYMartin Roth
Change-Id: Id074f3656801d412efb9485a6e2578beb9782259 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/18994 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-28asus/f2a85-m: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I7ba328c73f5fb44e50f00cb93db4f7ac8afbfdc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18712 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28elmex/pcm205400: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I5181af1b8a779faa8821eb5cbac30542b5ff6ec7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18711 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28asrock/e350m1: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I335494b3339f2e5da7b1b0483b557a6eb211dfc1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18710 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28pcengines/apu1: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I4bc357b202e6fc769dd4964a4bb774897e9fd20b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28gizmosphere/gizmo: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iab25dfb4811a325e66757c3969db1766a29ecd7f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28AGESA: Fork for new cache-as-ram init codeKyösti Mälkki
To gradually consolidate and improve AGESA board romstages, fork the original CAR setup code as a separate file. It becomes too messy with preprocessor to attempt make changes within the same file, and at end of patchset original becomes obsolete. Change-Id: I256b675b1ab9e13c2bcc956e0d67c6c03e91f2ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18620 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28AGESA: Introduce AGESA_LEGACY and its counterpartKyösti Mälkki
We define AGESA_LEGACY as an implementation of mainboard that has its romstage main completely under mainboard/ directory. We have learnt from other platforms this approach has several downsides when it comes to making platform-wide improvements. We start by creating per-family romstage.c file, which boards will gradually take into use by removing the AGESA_LEGACY Kconfig option we here apply to all of them. Change-Id: Id01931e185a023039a60af16a678de9966db8d65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18619 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-27mainboard: Add Sapphire Pure Platinum H61Nicola Corna
This board has a socketed SOIC-8 4 MB flash chip. All the flash regions are unlocked by default but unfortunately flashrom doesn't work with the original firmware and the stock UEFI flash tool refuses to flash the coreboot image (different image ID). For now, the external programmer seems to be the only option for the first coreboot flashing. Tested and working: * Debian GNU/Linux Stretch (with Linux kernel 4.9, SeaBIOS) * Microsoft Windows 7 installer with VGA blob (SeaBIOS) * Internal GPU, both with VGA blob and libgfxinit (VGA and DVI) * External GPU * RAM (tested 8 + 8 GB) * S3 * USB, both the 2.0 and 3.0 ports * Sata * Thermal management * Sound * LAN * Bluetooth * VT-x and VT-d * me_cleaner Not working: * Microsoft Windows 7 installer with libgfxinit Untested: * Backside Mini PCI-E port * DisplayPort and HDMI ports Issues: * The USB is always powered, even is S3 and S5 (like in the original firmware). * Internal flashing with flashrom doesn't work after resuming from S3. * The raminit is unreliable, as the RAM training sometimes fails and sometimes succeeds, with the same couple of RAMs. Once a MRC cache has been created, the raminit works fine. * If an external card is inserted and the option ONBOARD_VGA_IS_PRIMARY is not enabled, the internal GPU disappears completely from the PCI bus. Change-Id: I76aca2cfc4708c1728ae03ee4f6bc59d976c28a0 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18564 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-27superio/fintek: Add support for Fintek F71808ANicola Corna
This chip is similar to the Fintek F71869AD. Change-Id: Iba3f3dadf2b15071981f52d0b08da7847354bd23 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18563 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-03-27nb/intel/sandybridge: Use DIV_ROUND_UP macro to select timingsArthur Heymans
This is a cosmetic change. Change-Id: Iea4dd97e9d83594447427abd9f844e507b805192 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18960 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-03-27util/lint: Show an error if a symbol is created in two choice blocksMartin Roth
Kconfig shows a warning about this, but we want to catch it earlier and halt the build. Change-Id: I0acce1d40a6ca2b212c638bdb1ec65de5bd4d726 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18970 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-27ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeecFurquan Shaikh
Instead of defining a separate LID device for mainboards using chromeec, define EC_ENABLE_LID_SWITCH for these boards. Change-Id: Iac58847c2055fa27c19d02b2dbda6813d6dec3ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-27mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.hFurquan Shaikh
Instead of defining SIO_EC_ENABLE_PS2K by default for all boards and doing an undef in variant/onboard.h, move the definition of SIO_EC_ENABLE_PS2K to variant/onboard.h. This avoids dependency between different *.asl files. Change-Id: I83e4ce42a594e952a443c618d7ef9840113027b9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-273rdparty/vboot: Update to upstream masterMartin Roth
This brings in 70 new commits from the upstream vboot repository, dated October 31, 2016 to March 2, 2017 Change-Id: Iac9c2b0389afbfa02c1cccc38d39a12dac4a5ac4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18953 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-26soc/intel/fsp_baytrail: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside soc/intel/fsp_baytrail. Change-Id: I2791346289c04049e6f032c8e120e4be9ba6657f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17319 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-26mb/lenovo/s230u: Fix USBDEBUG checkMartin Roth
- Change preprocessor #if to standard C if. This will get optimized out if the config option is disabled, but lets the compiler check the contents. - CONFIG_USBDEBUG is always going to be defined even if it's disabled, so this check is not going to work as expected. See the coreboot Kconfig documentation in /Documentation/core/Kconfig.md Change-Id: Ia63438d9525e79307d9229ad3ffa2962978611d8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18974 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins)
2017-03-24util/docker: Update coreboot-sdk dockerfileMartin Roth
- Update the dockerfile which generates the base docker image for the coreboot builders to include gnat. This matches the changes made in the crossgcc/Dockerfile in commit 6b28fff0b (crossgcc/Dockerfile: Add gnat to build the Ada toolchain). - Remove the -b from the toolchain build command line. This doesn't seem to be needed. Change-Id: I26d4dca5805f57cab50065cf1c25164b909a0b3d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18961 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-24nb/intel/i945: Fix SPD dumpsPaul Menzel
Currently the `break` further down is called unconditionally as the brackets for the body of the if statement are missing. Add those. Change-Id: I34917a9877dcc882d880dedea689e1d72fe52888 Found-by: Coverity (CID 1372941: Control flow issues (UNREACHABLE)) Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/18971 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-24soc/intel/apollolake: Remove unused CAR_GLOBAL variableSubrata Banik
Also move all local variable declaration at starting of function block. Change-Id: I774485a23b4b7d96a8dbd837da45553251dff3b0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18949 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-24soc/intel/skylake: Use C entry code for MTRR programmingSubrata Banik
Make skylake cache as ram SPI mapped MTRR programming align with apollolake code. Change-Id: I87a5c655da8ff5f6d8ef86907b7ae2263239b1ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18923 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-24mainboard/google/snappy: Update DPTF settingsWisley Chen
1. Remove CPU throttling effect of the charger sensor Refers Change-Id I267b6e07fa9def2c91ff9f6035f2d9437faf1965 (mb/google/reef: Remove CPU throttling effect of the charger sensor) to remove CPU throttling effect of the charger sensor since it's not relevant to throttle CPU based on the charger sensor. 2. Change TSR1 influence from 200 to 100 3. Change TSR2 sample period from 120s to 30s BUG=b:35585781 BRANCH=reef TEST=built, and verified on snappy by thermal team. Change-Id: Ic3fc51c4288b24f4e64950e5b148aed4495a1c3b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18950 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-03-23cr50: add unmarshaling of vendor commands and process 'enable_update'Vadim Bendebury
The upcoming Cr50 firmware changes will require the AP to enable the previously downloaded Cr50 firmware update(s). A new vendor command (TPM2_CR50_SUB_CMD_TURN_UPDATE_ON) is used for that. The command accepts one parameter - a timeout value in range of 0 to 1000 ms. When processing the command the Cr50 checks if the alternative RO or RW image(s) need to be enabled, and if so - enables them and returns to the host the number of enabled headers. If the vendor command requested a non-zero timeout, the Cr50 starts a timer to trigger system reboot after the requested timeout expires. The host acts on the number of enabled headers - if the number is nonzero, the host prepares the device to be reset and waits for the Cr50 to reboot the device after timeout expires. This patch also adds more formal vendor command marshaling/unmarshaling to make future additions easier. BRANCH=gru,reef BUG=b:35580805 TEST=with the actual user of this code in the next patch verified that the cr50 update is enabled as expected. Change-Id: Ic76d384d637c0eeaad206e0a8242cbb8e2b19b37 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/18945 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-23google/fizz: Update device tree from schematicShelley Chen
BUG=b:35775024 BRANCH=None TEST=Compiles successfully Change-Id: I92cf9baa4c3aefc6983511543d875e74a6b0bf94 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18944 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23Documentation: Add doxygen_platform targetMartin Roth
Create a doxygen target that builds documentation just for the platform that is currently selected in Kconfig. This gives us something that is much more useful to most people. Change-Id: I25c3cdac2dd383b89df6389ba9011dac913a0a9b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15577 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23google/fizz: Transfer gpio from schematicShelley Chen
Transfer the gpio assignments in the fizz schematic into gpio.h. BUG=b:35775024 BRANCH=None TEST=./util/abuild/abuild -p none -t google/fizz -x -a Change-Id: If05aa2859f2511c3f616dc3fb38bca4fb8524697 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18797 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-23google/fizz: Remove poppy-specific configsShelley Chen
- Remove spd files/directory - Remove audio blobs - Remove dptf.asl contents - Remove MKBP - Remove acpi table initialization BUG=b:35775024 BRANCH=None TEST=Compiles successfully Change-Id: I5d717d23224956ee1653c5ded28abd05cd254c3a Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18857 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23google/fizz: Add new boardShelley Chen
Creating google/fizz directory based on poppy (using kabylake and FSP 2.0). Only making name changes and Copyright year changes. Many poppy-specific configs left in and will be updated in follup CLs. BUG=b:35775024 BRANCH=None TEST=Compile fizz board Change-Id: Icab3639a53fef65e904e797028916fda879fff7c Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/18796 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-23soc/intel/skylake: Add SGX initializationRobbie Zhang
This patch implements SGX initialization steps in coreboot per Intel SGX BWG rev 2.0.8 for Kaby Lake SoC. If enabled on a Kabylake device, SoC capability and PRM (processor reserved memory) of desired size (needs to be configured through PrmrrSize) are provisioned for later software stack to use SGX (i.e., run SGX enclaves). One issue is still puzzling and needs to be addressed: by calling configure_sgx() in cpu_core_init() which is the per-thread function, SGX is always failing for thread 0 but is successful for other 3 threads. I had to call configure_sgx() again from soc_init_cpus() which is the BSP-only function to make it enable on the BSP. Another pending work is the implementation for the Owner Epoch update which shall be added later. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified SGX activation is successful on all threads. Change-Id: I8b64284875eae061fa8e7a01204d48d320a285a9 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18445 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-23src/vboot: Add valid license headers to all filesMartin Roth
Change-Id: I77d7d6048fee9b378aa04c1a62b830e08f95ec22 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18407 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-23crossgcc/Dockerfile: Add gnat to build the Ada toolchainNico Huber
If gnat is installed, buildgcc automatically enables Ada support. Instead of the general `gnat` package we install `gnat-6` which saves us about 80 MiB of downloads of unused "dependencies". Change-Id: Ie0b8564d016d458cd33ff75a2ee7bbd5de33afe2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18772 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-23mainboard/samsung/stumpy: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/samsung/stumpy. Change-Id: Ie6209b3b40d9aad0723690e7aeb3edfd0bfcc4a8 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17304 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23mainboard/samsung/lumpy: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/samsung/lumpy. Change-Id: I39fe6bad42b3b0772d09d0fa7af357b797b8e04f Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17303 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23northbridge/via/vx900: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside northbridge/via/vx900. Change-Id: I04292a6b698a42a5c582eddcef7cf5a235e1a464 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17317 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23mainboard/technexion/tim5690: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/technexion/tim5690. Change-Id: I661daa5ab34c70db8ed783e5bf1114877f13b548 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17307 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23buildgcc: Relax GNAT version checksNico Huber
Compiling the GNAT frontend of GCC seems to have stabilized since GCC 4.9.0. So build it by default if GNAT >= 4.9 is installed. TEST=Bootstrapped all GCC versions from 4.9.0 to 6.2 and built the i386 cross toolchain with each. Change-Id: I9d1127595dc6b9bcece9c5e5cc7e45f467744ab9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18777 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-23buildgcc: Fix check for a .success fileNico Huber
We were looking for the wrong file for some time. With bootstrapping enabled, this resulted in a spurious message about the host GCC being already built. Change-Id: Ieb52c5925ea5615c83311319f22693b72f4987f9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18776 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-22southbridge/intel/i82801gx: Fix problems found by checkpatch.plArthur Heymans
Change-Id: Iddc67e7c126ce19429afc24b021e385353564cb8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18705 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-22nb/intel/i945: Fix errors found by checkpatch.plArthur Heymans
Change-Id: Ic2dd40e73d4a4c091c5ce1f49bbf9ab4d013d7af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-22google/chromeec: Ensure \_SB.LID0 is present before using itFurquan Shaikh
Since we want to support devices that do not have a lid but still use EC, we need to conditionally check if referencing \_SB.LID0 is valid. BUG=b:35775024 Change-Id: I92433460ec870fb07f48e67a6dfc61e3c036a129 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18941 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-22soc/intel/skylake: Add option to disable host reads to PMC XRAMRizwan Qureshi
FSP disables host access to shadowed PMC XRAM registers by default, it also provides a UPD to enable/disable host reads to these regiters. Expose the same in devicetree as a config option. Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add configs for enabling DCI and TraceHubAamir Bohra
Add configs for enabling Intel TraceHub and DCI for aid in debugging. Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/apollolake: Add CQOS config for CAR common codeSubrata Banik
Change-Id: I5947170a96e888cea2f3faac92355e72b63c1fef Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22mainboard/google/reef: add nasher variantYH Lin
Create the initial Nasher variant which refers to the Reef. Nasher is APL board that derives from reference board Reef. BRANCH=master BUG=b:36389286 TEST=Build (as initial setup) Signed-off-by: YH Lin <yueherngl@chromium.org> Change-Id: I7962aa8246890149988c7f02dcd90d820df7b901 Reviewed-on: https://review.coreboot.org/18928 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-21google/pyro: Update DPTF settingsKevin Chiu
1. correct DPTF TCHG target device to TSR2 2. Refers Change-Id I267b6e07fa9def2c91ff9f6035f2d9437faf1965 (mb/google/reef: Remove CPU throttling effect of the charger sensor) to remove CPU throttling effect of the charger sensor since it's not relevant to throttle CPU based on the charger sensor. BUG=b:35586881 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I4801e0e612e0ddf90764ffe080c679818d33212a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18920 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-21mainboard/google/poppy: Use sideband IRQ for SD Card DetectFurquan Shaikh
Since SD card controller is expected to enter D3hot by runtime power management if there is no card inserted, we need to use a sideband IRQ pin which is not under the control of the controller. Thus, configure GPP_A7 as the sideband IRQ pin and pass it to OS as the card detect pin. BUG=b:35586693 BRANCH=None TEST=Verified on a reworked poppy board that card detect works fine. Change-Id: I4512f5d7829583e27c9750463396eaffbc5702b4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18926 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-21nb/x4x: Move checkreset before SPD readingArthur Heymans
It makes no sense to read SPDs if the system will reset anyway. Change-Id: Id2ad9b04860b3e4939a149eef6b619a496179ff8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17661 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-21nb/intel/x4x: Fix issues found by checkpatch.plArthur Heymans
Change-Id: Ie22b8bd5420f8c33df1866410af42ef41ad38362 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18694 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-21mainboards: Don’t select `CONSOLE_POST`Paul Menzel
Currently, it’s impossible for the user to select `NO_POST`, for boards selecting `CONSOLE_POST` in their config. ``` warning: (BOARD_SPECIFIC_OPTIONS) selects CONSOLE_POST which has unmet direct dependencies (VENDOR_SIEMENS && BOARD_SIEMENS_MC_BDX1 || !NO_POST) ``` This is currently done for Intel Camelback Mountain and Siemens MC-BDX1. Selecting the option `CONSOLE_POST` in board specific configuration is not a good idea, as this should be user configurable over Kconfig, and also the tree-wide defaults should be the same for these options. Kconfig is different, as commit 97535558f1 (mainboard/{google,intel}: Change config option selection) only touch the Intel board. Change-Id: I91c1e0cb92ed218b6bbc7c33759b91f748cf6f51 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18878 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-03-21mainboards: Don’t select `POST_IO`Paul Menzel
Currently, it’s impossible for the user to select `NO_POST`, for boards selecting it in their config. ``` warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS) selects POST_IO which has unmet direct dependencies (VENDOR_ASUS && (BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO || BOARD_ASUS_F2A85_M_LE) && (BOARD_ASUS_F2A85_M || BOARD_ASUS_F2A85_M_PRO) || VENDOR_MSI && BOARD_MSI_MS7721 || PC80_SYSTEM && !NO_POST) ``` This is currently done for Intel Mohon Peak, and its descendants. Selecting the option `POST_IO` in board specific configuration is not a good idea, as this should be user configurable over Kconfig, and also the tree-wide defaults should be the same for these options. Change-Id: Ia4ab0d942b7d66f18466a770ef739109ab0db629 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18877 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-21southbridge/nvidia/mcp55: Get rid of #include early_smbus.cArthur Heymans
Using linker instead of '#include *.c'. Change-Id: I74dfa99c8bb3f4ca7ef3d774be2197897022f52c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18484 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-21soc/intel/apollolake: Use common function to fill DIMM informationBarnali Sarkar
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB and use common function dimm_info_fill() to save it in CBMEM. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot Reef to verify the type 17 DIMM info coming in SMBIOS table from Kernel command "dmidecode". Change-Id: I33c3a0bebf33c53beadd745bc3d991e1e51050b7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18451 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-03-21ec/lenovo/h8: Support an optional battery page flip delayTobias Diedrich
The Lenovo H8 battery interface uses a paged EC memory area. Some Thinkpads (in particular the S230U) use a different EC controller (ENE KB9012) with mostly compatible firmware, which requires an explicit delay between writing the page register and reading the page data. Change-Id: Iaeb8c4829efa29139396b519de803f10dd93f03f Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18348 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-21emulation/qemu-i440fx: Use SMBIOS macrosPaul Menzel
Change-Id: Idda4d74f9b934ccefe6ea5b553bde587059cde64 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/18790 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-21google/sand: Add Raydium touchscreen deviceKatherine Hsieh
We just support Raydium touchscreen instead of Elan. Thus we have to remove Elan touchscreen device and add Raydium touchsrcreen device. BUG=b:35775065 BRANCH=reef TEST=emerge-sand coreboot Change-Id: I7b33a29287dcb90e379b52cc93825f2988a0d3c9 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/18789 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-20util/cbfstool: avoid memleaks and off-by-onesPatrick Georgi
Change-Id: Iac136a5dfe76f21aa7c0d5ee4e974e50b955403b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: scan-build 3.8 Reviewed-on: https://review.coreboot.org/18134 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-20mb/apple/macbook11,macbook21,imac52: Remove per board directoriesArthur Heymans
This is achieved by setting up Kconfig and Kconfig.name very similar to how variants are used. Change-Id: I22089ff29e3879d7956527a092a0ac6425b05cb3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17894 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-20arch/x86: Fix most of remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: do not use assignment in if condition ERROR: trailing statements should be on next line ERROR: Macros with complex values should be enclosed in parentheses ERROR: switch and case should be at the same indent WARNING: char * array declaration might be better as static const WARNING: else is not generally useful after a break or return WARNING: storage class should be at the beginning of the declaration WARNING: void function return statements are not generally useful WARNING: break is not useful after a goto or return WARNING: Single statement macros should not use a do {} while (0) loop WARNING: sizeof *t should be sizeof(*t) WARNING: Comparisons should place the constant on the right side of the test TEST=Build and run on Galileo Gen2 Change-Id: I39d49790c5eaeedec5051e1fab0b1279275f6e7f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-20mainboard/google/snappy: Update _hid name for weida touchscreenWisley Chen
Change hid name to "WDHT0002" for Weida WDT8752 which is supported by standard hid i2c Linux driver. BUG=b:35586513 BRANCH=reef TEST=build, boot on snappy, and verified acpi node "WDHT0002" created. Change-Id: Ie0cc980aa427b6db1eb14eb7868718619bb1310f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18874 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-19mb/google/reef: Remove CPU throttling effect of the charger sensorSumeet Pawnikar
It's not relevant to throttle CPU based on the charger sensor. So, remove this CPU throttling effect. BUG=b:35908799 BRANCH=master TEST=Built and booted on Electro DUT Change-Id: I267b6e07fa9def2c91ff9f6035f2d9437faf1965 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/18852 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-03-19cpu/x86: add a barrier with timeoutBora Guvendik
In case something goes wrong on one of the cpus, add the ability to use a barrier with timeout so that other cpus don't wait forever. Remove static from barrier wait and release. BUG=chrome-os-partner:59875 BRANCH=reef TEST=None Change-Id: Iab6bd30ddf7632c7a5785b338798960c26016b24 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/18107 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-19ramstage: Align stack to 16 bytesKyösti Mälkki
Some SSE instructions could take 128bit memory operands from stack. AGESA vendorcode was always built with SSE enabled, but until now stack alignment was not known to cause major issues. Seems like GCC-6.3 more likely emits instructions that depend on the 16 byte alignment of stack. Change-Id: Iea3de54f20ff242105bce5a5edbbd76b04c0116c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18823 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-19tint: Add USB supportNicola Corna
Enable the USB during the initialization of tint. Without it USB keyboards don't work, which makes this payload pointless on systems where a PS/2 keyboard port isn't available. Based on I98f0ccdb19d6b195572941cf87ce3221f57db7c5 (tint and nvramcui: enable USB, update tint to 0.04+nmu1 with changes) [1] [1] https://review.coreboot.org/17507/ Change-Id: Iaa8dfac0301ef19a2d76a0975d025b00e7f3807b Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18766 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-19sb/intel/common/firmware: Add Intel ME/TXE firmware checkNicola Corna
Ensure that the provided ME/TXE firmware is valid, using the check capabilities of me_cleaner. me_cleaner checks that the fundamental partition is available and it has a correct signature. The checks performed by me_cleaner aren't exhaustive, but they should find at least whether the user has provided an empty or corrupted firmware. me_cleaner has been tested on all the ME (6-11.6) and TXE (1-3) firmwares available here [1], and it hasn't reported any false positive. [1] http://www.win-raid.com/t832f39-Intel-Engine-Firmware-Repositories.html Change-Id: Ie6ea3b4e637dca4097b9377bd0507e84c4e8f687 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18768 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-18nb/i945/gma.c: Refactor panel setupArthur Heymans
This reuses some of gm45 code to set up the panel. Panel start and stop delays and pwm frequency can now be set in devicetree. Linux does not make the difference between 945gm and gm45 for panel delays, so it is safe to assume the semantics of those registers are the same. The core display clock is computed according to "Mobile Intel® 945 Express Chipset Family" Datasheet. This selects Legacy backlight mode since most targets have some smm code that rely on this. This sets the same backlight frequency as vendor bios on Thinkpad X60 and T60. A default of 180Hz is selected for the PWM frequency if it is not defined in the devicetree, this might be annoying for displays that are LED backlit, but is a safe value for CCFL backlit displays. Change-Id: I1c47b68eecc19624ee534598c22da183bc89425d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-03-17drivers/intel/fsp1_1: Fix issues detected by checkpatchLee Leahy
Fix the following error and warnings detected by checkpatch.pl: ERROR: "foo * bar" should be "foo *bar" WARNING: line over 80 characters WARNING: else is not generally useful after a break or return WARNING: braces {} are not necessary for single statement blocks WARNING: suspect code indent for conditional statements (16, 32) WARNING: Comparisons should place the constant on the right side of the test TEST=Build and run on Galileo Gen2 Change-Id: I9f56c0b0e3baf84989411e4a4b98f935725c013f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18886 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-17soc/intel/broadwell: Fix other issues detected by checkpatchLee Leahy
Fix the following error and warnings detected by checkpatch.pl: ERROR: switch and case should be at the same indent WARNING: line over 80 characters WARNING: storage class should be at the beginning of the declaration WARNING: adding a line without newline at end of file WARNING: __func__ should be used instead of gcc specific __FUNCTION__ WARNING: Comparisons should place the constant on the right side of the test TEST=None Change-Id: I85c400e4a087996fc81ab8b0e5422ba31df3c982 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18885 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/broadwell: Fix {}, () and conditional issuesLee Leahy
Fix the following errors and warnings detected by checkpatch: ERROR: open brace '{' following struct go on the same line ERROR: return is not a function, parentheses are not required ERROR: do not use assignment in if condition ERROR: trailing statements should be on next line WARNING: else is not generally useful after a break or return WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement TEST=None Change-Id: I9414341b0c778c252db33f0ef4847b9530681d96 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18884 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/broadwell: Add int to unsignedLee Leahy
Fix the following issue detected by checkpatch: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=None Change-Id: Iae22e724b6adae16248db7dc8f822f65bfadae5f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18873 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-17soc/intel/broadwell: Fix spacing issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxW) ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that '<=' (ctx:WxV) ERROR: spaces required around that '<=' (ctx:VxV) ERROR: spaces required around that '>' (ctx:VxV) ERROR: spaces required around that '>=' (ctx:VxV) ERROR: spaces required around that '+=' (ctx:VxV) ERROR: spaces required around that '<' (ctx:VxV) ERROR: "foo * bar" should be "foo *bar" ERROR: "foo* bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" ERROR: space required before the open parenthesis '(' WARNING: space prohibited between function name and open parenthesis '(' WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line False positives are generated for the following test: WARNING: space prohibited between function name and open parenthesis '(' in both pei_data.h and pei_wrapper.h TEST=None Change-Id: Icab08e5fcb6d5089902ae5ec2aa5bbee5ac432ed Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18872 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17google/veyron: Clean out unused board variantsJulius Werner
We have code for certain Veyron variant names that were either never made into an actual board (Gus, Nicky, Thea) or used for Google-internal test boards that no longer exist (Pinky, Shark). Let's clean them out to avoid confusing people. Change-Id: Icdce5f0f3613e089d0994318b02dba54170f0c42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-17google/veyron: Work around RAM code strapping errorJulius Werner
With a recent patch (google/veyron_*: Add new Micron and Hynix modules) we switched RAM codes for Veyron boards to tri-state since we were running out of binary numbers. Unfortunately we only tested that change on Minnie and Speedy, and it turns out that it broke Jaq, Jerry and Mighty. The "high" RAM code pins on those boards were incorrectly strapped with 100Kohm resistors (as opposed to 1Kohm on Minnie and Speedy), which is too high to overpower the SoC-internal pull-down we use to differentiate "high" from "tri-state". Since we already used tri-state codes on some Minnie and Speedy SKUs we have to hack up the code to work differently on these two groups of boards to keep everything working. BRANCH=veyron BUG=b:36279493 TEST=Compiled, confirmed ram_code called the right function depending on board. Change-Id: I253b213ef7ca621ce47a7a55a5119a167d944078 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18859 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-17mainboard/google/poppy: Enable EC SW syncFurquan Shaikh
Now that EC on poppy is stable, it is time to switch on EC SW sync. BUG=b:36178824 BRANCH=None TEST=Verified that EC SW sync is done properly and device boots to OS. Change-Id: I1395ad8af73128a8dd220351f5b5da157659b19e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18838 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/apollolake: Reduce D3 cold delay for eMMC controllerZhuo-hao Lee
eMMC Controller is taking over 100ms to resume during runtime which results in I/O latency issues on the Apollo Lake system such as Snappy. The cause is the Linux Kernel setting the firmware reset time to 100 ms by default. This patch adds _DSM method for eMMC comtroller for specifying the device readiness durations. Function index 9 returns package of five integers to set D3 cold delay to zero and ACPI constant Ones for the elements where overriding the default values is not desired. BUG=b:35774937 BRANCH=none TEST=update snappy coreboot and test i/o latency is under 100ms Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Signed-off-by: Sowmya V <v.sowmya@intel.com> Change-Id: Idcfe4252b20bead15c2e5b9cb000ff797295f06a Reviewed-on: https://review.coreboot.org/18806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-17arch/x86: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters TEST=Build and run on Galileo Gen2 Change-Id: I3495cd30d1737d9ee728c8a9e72bd426d7a69c37 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18864 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17arch/x86: Fix prefer errors detected by checkpatchLee Leahy
Fix the following warnings detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: plain inline is preferred over __inline__ TEST=Build and run on Galileo Gen2 Change-Id: I8ba98dfe04481a7ccf4f3b910660178b7e22a4a7 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18863 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17arch/x86: Fix space issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: space required before the open parenthesis '(' ERROR: space prohibited after that open parenthesis '(' ERROR: space prohibited before that close parenthesis ')' ERROR: space prohibited after that open square bracket '[' ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxW) ERROR: space required after that ';' (ctx:VxV) ERROR: spaces required around that ':' (ctx:ExV) ERROR: spaces required around that ':' (ctx:VxW) ERROR: spaces required around that ':' (ctx:WxV) ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that '+=' (ctx:VxV) ERROR: spaces required around that '<=' (ctx:WxV) ERROR: spaces required around that '||' (ctx:VxW) ERROR: space prohibited before that '++' (ctx:WxO) ERROR: need consistent spacing around '+' (ctx:WxV) ERROR: spaces required around that '<' (ctx:WxV) ERROR: spaces required around that '<' (ctx:VxV) ERROR: need consistent spacing around '>>' (ctx:WxV) ERROR: "(foo*)" should be "(foo *)" ERROR: "foo* bar" should be "foo *bar" ERROR: "foo * bar" should be "foo *bar" ERROR: code indent should use tabs where possible WARNING: space prohibited between function name and open parenthesis '(' WARNING: unnecessary whitespace before a quoted newline WARNING: please, no spaces at the start of a line WARNING: please, no space before tabs WARNING: Unnecessary space before function pointer arguments TEST=Build and run on Galileo Gen2 Change-Id: I2d7e1a329c6b2e8ca9633a97b595566544d7fd33 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17arch/x86: Fix issues with braces detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: open brace '{' following function declarations go on the next line ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' WARNING: braces {} are not necessary for any arm of this statement WARNING: braces {} are not necessary for single statement blocks TEST=Build and run on Galileo Gen2 Change-Id: I13d1967757e106c8300a15baed25d920c52a1a95 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18861 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/braswell: Fix most of the issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: that open brace { should be on the previous line ERROR: return is not a function, parentheses are not required WARNING: braces {} are not necessary for any arm of this statement WARNING: line over 80 characters WARNING: braces {} are not necessary for single statement blocks WARNING: Avoid unnecessary line continuations WARNING: break is not useful after a goto or return WARNING: else is not generally useful after a break or return False positives are generated by checkpatch for the following test: ERROR: Macros with complex values should be enclosed in parentheses TEST=Build for cyan Change-Id: I19048895145b138a63100b29f829ff446ff71b58 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18871 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for cyan Change-Id: Ib5c6a1bf5308a8add42d7371854b80ea53d7ae84 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18870 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Fix spacing issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxE) ERROR: spaces required around that '=' (ctx:WxV) ERROR: code indent should use tabs where possible WARNING: space prohibited between function name and open parenthesis '(' WARNING: please, no spaces at the start of a line TEST=Build for cyan Change-Id: I84d4204585b498b695608c5008fdfb7961e2416f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18869 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/skylake: Fix remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-16google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQRizwan Qureshi
The kernel driver for rt5663 expects to get an interrupt on both a rising and falling edge, and using a legacy interrupt doesn't provide that flexibility. Instead configure this pin as a GPIO and use the interrupt through the GPIO controller. This allows using GpioInt() with ActiveBoth setting and results in correct operation of the headset jack. This is a clone of Duncan's patch for eve at I6f181ec560fe9d34efc023ef6e78e33cb0b4c529 BUG=none BRANCH=none TEST=test on poppy that headset jack detect is read properly at boot, and that plugging in and removing both generate a single interrupt event in the driver. Change-Id: I4aaa4164cb277a98ab5d5f033632f5e16bfb779e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18853 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-16google/eve: Use rt5663 interrupt as GpioInt instead of PIRQDuncan Laurie
The kernel driver for rt5663 expects to get an interrupt on both a rising and falling edge, and using a legacy interrupt doesn't provide that flexibility. Instead configure this pin as a GPIO and use the interrupt through the GPIO controller. This allows using GpioInt() with ActiveBoth setting and results in correct operation of the headset jack. BUG=b:35585307 BRANCH=none TEST=test on Eve that headset jack detect is read properly at boot, and that plugging in and removing both generate a single interrupt event in the driver. Change-Id: I6f181ec560fe9d34efc023ef6e78e33cb0b4c529 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18836 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-16i2c/generic: Add support for GPIO IRQDuncan Laurie
Add support for using GPIO IRQ instead of PIRQ with an I2C device. This allows a device to use an edge triggered interrupt that will trigger on both high and low transitions. The _DSD method for describing these GPIOs has a field for 'active low' which is supposed to be 1 if the pin is active low, otherwise is zero. The value in here doesn't mean too much for GpioInt() as those will end up using the value from GpioInt() when it actually requests the interrupt. BUG=b:35581264 BRANCH=none TEST=test on Eve board that codec IRQ can be delcared as GPIO IRQ Change-Id: I02c64c7fc28dc2d608ad40db889c7242892f16db Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18835 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-16acpi_device: Add macro for GpioInt that uses both polarityDuncan Laurie
GPIO edge interrupts can report that they are ActiveBoth and will generate an interrupt event on both rising and falling edges. Add a macro so this type of GPIO interrupt can be used. BUG=b:35581264 BRANCH=none TEST=successfully use this interrupt type on Eve Change-Id: I91408386538e442bddcacc9840e0aa14370a446c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18834 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>