summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-23soc/intel/apollolake: utilize postcar phase/stageAaron Durbin
The current Apollolake flow has its code executing out of cache-as-ram for the pre-DRAM stages. This is different from past platforms where they were just executing-in-place against the memory-mapped SPI flash boot media. The implication is that when cache-as-ram needs to be torn down one needs to be executing out of DRAM since the act of cache-as-ram going away means the code disappears out from under the processor. Therefore load and use the postcar infrastructure to bootstrap this process for tearing down cache-as-ram and subsequently loading ramstage. Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14141 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-23arch/x86: introduce postcar stage/phaseAaron Durbin
Certain chipsets don't have a memory-mapped boot media so their code execution for stages prior to DRAM initialization is backed by SRAM or cache-as-ram. The postcar stage/phase handles the cache-as-ram situation where in order to tear down cache-as-ram one needs to be executing out of a backing store that isn't transient. By current definition, cache-as-ram is volatile and tearing it down leads to its contents disappearing. Therefore provide a shim layer, postcar, that's loaded into memory and executed which does 2 things: 1. Tears down cache-as-ram with a chipset helper function. 2. Loads and runs ramstage. Because those 2 things are executed out of ram there's no issue of the code's backing store while executing the code that tears down cache-as-ram. The current implementation makes no assumption regarding cacheability of the DRAM itself. If the chipset code wishes to cache DRAM for loading of the postcar stage/phase then it's also up to the chipset to handle any coherency issues pertaining to cache-as-ram destruction. Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14140 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-22gpio: Add support for binary_first base3 number systemJulius Werner
This patch adds support for an alternative ternary number system in which group of GPIOs can be interpreted. In this system, the digit combinations that would form a binary number (i.e. that contain no 'Z' state) are used to represent the lower values in the way they're used in the normal binary system, and all the combinations that do contain a 'Z' are used to represent values above those. We can use this for boards that originally get strapped with binary board IDs but eventually require more revisions than that representation allows. We can switch their code to binary_first base3 and all old revisions with already produced boards will still get read as the correct numbers. Credit for the algorithm idea goes to Haran Talmon. BRANCH=None BUG=None TEST=Stubbed out the actual GPIO reading and simulated all combinations of 4 ternary digits for both number systems. Change-Id: Ib5127656455f97f890ce2999ba5ac5f58a20cf93 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14116 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-22MAINTAINERS: Add maintainer for Braswell SOC & Reference boardMartin Roth
Change-Id: If3b49c3056abe6e1c1a14578d6c62a866bc6834d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14127 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2016-03-22lib/rmodule: export parameters in struct rmod_stage_loadAaron Durbin
In order for a caller to utilize an rmodule's parameters section after calling rmodule_stage_load() export the rmodule's parameter pointer in struct rmod_stage_load. Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14139 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-21soc/apollolake: Add skeleton ACPI entryLance Zhao
Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6 Signed-off-by: Lance Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/13348 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-21nb/intel/sandybridge: increase MMCONF_BASE_ADDRESSPatrick Rudolph
Set MMCONF_BASE_ADDRESS to 0xf8000000. It was already done for some boards, but not all. The sandybridge chipset code assumes 64 pci buses behind MMCONF. Therefore, only 64MiB of physical address space is required. Increasing the address allows to use additional 128MiB of MMIO space and to use the Intel IGD and a PEG at the same time. Previously it wasn't possible to use both at the same time, as two 256MiB areas won't fit into MMIO space. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Onboard GPU Intel IvyBridge Desktop * PEG GPU AMD RV770 Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-03-21mediatek/mt8173: Enable ARM trusted firmware integrationPatrick Georgi
In Chromium OS downstream this was done together with adding the support for ATF, but unfortunately ATF upstream isn't ready yet. This commit is a reminder to enable things once ATF caught up. Change-Id: Id0d6908d906a1e54cdda4f232d572d996d9c556f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13968 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Remove bl31 board parameters passing mechanismJimmy Huang
As the DA9212 and MT6311 external buck can be controlled by hardware since rev-5 board, we don't need to pass any board specific parameter to ARM TF. BRANCH=none BUG=none TEST=build pass Change-Id: I43eebe25ab14d3dd84e8bb4286e2bb55c8c3c063 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c4dfe61c69042e464b384e2e0edbc55eda23a74 Original-Change-Id: I541357fee6afb1ff2d771bcb073f7c9a9db52f00 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332344 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14124 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21google/oak: Move external buck initialization to coreboothenryc.chen
Remove the code which is passing parameters to ARMTF and move external buck initilizaton from ARMTF to coreboot. BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332343 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14123 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Add da9212 driverhenryc.chen
Add secondary PMIC for external buck control on Oak rev0/1/2/5 BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: Ia000b0c7d61e8396856656247f9627e33b21b19b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 241508e7d781fac8ee085ee81962043dd654c52d Original-Change-Id: I6c75e2462363a5523bf1ebb03af7a36740293624 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332342 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21mediatek/mt8173: Add mt6311 driverhenryc.chen
Add secondary PMIC for external buck control on Oak rev3/4 BRANCH=none BUG=none TEST=verified on Oak rev4/rev5 Change-Id: I24c18a1cf71fc57deacedcbeb6a100b131c28077 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7f7f8ceac795d8193194a6918a73c4b391009025 Original-Change-Id: I312d8281d2c09d8bc43f092edef3e405d51ee7d0 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332341 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21device: Add i2c read/write register field APIYidi Lin
i2c_read_field() - read the value from the specific register field i2c_write_field() - write the value to the specific register field BRANCH=none BUG=none TEST=none Change-Id: I2098715b4583c1936c93b3ff45ec330910964304 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332712 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14105 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21nb/amd/amdmct/mct_ddr3: Ensure BlockRxDqsLock does not remain setTimothy Pearson
Under certain conditions (training abort) BlockRxDqsLock could remain set in violation of the BKDG. Ensure BlockRxDqsLock is reset to 0 after a lane training abort. Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b Reviewed-on: https://review.coreboot.org/14144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21Documentation: x86 MTRR setup, TempRamExit and MTRR loadingLee Leahy
Document how to test TempRamExit and verify the MTRR setup and loading. TEST=None Change-Id: I57a604fa139edac4b05453547d3caf185db491e0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14113 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21Documentation/Intel: Add more Galileo Gen2 linksLee Leahy
Add datasheet links for the components supporting GPIO. This includes I2C I/O ports, I2C PWMs, bus buffers and multiplexers. TEST=None Change-Id: I0a1d222d6f9bdbd824b78edf2338cd797e83ebba Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14114 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21Documentation: x86 shadow ROM disableLee Leahy
Add documentation on disabling the SPI flash which is mapped (shadowed) into the x86 address space at 0x000e0000 - 0x000fffff. TEST=None Change-Id: I1d94d84c6cade97886a3274a7e7403f7b3275c5a Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/14112 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21soc/intel/quark: Disable the ROM shadowLee Leahy
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing successful display of 0x000ffff0 - 0x000fffff does not match the end of the SPI flash. Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14110 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21mainboard/intel/galileo: Enable SPI controllersLee Leahy
Enable the SPI controllers on the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Load the SPI driver stack * Testing is successful when the time is able to be displayed on a set of seven-segment displays controlled by a Maxim MAX6950 SPI display controller. Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21device/dram/ddr3: fix debug outputPatrick Rudolph
Add missing punctuation and align output. No functionality is changed. Old logging output: Revision: 11 Type : b Key : 2 Banks : 8 Capacity: 4 Gb Supported voltages: 1.5V SDRAM width : 8 Bus extension : 0 bits Bus width : 64 Optional features : DLL-Off_mode RZQ/7 RZQ/6 Thermal features : ASR ext_temp_range Thermal sensor : no Standard SDRAM : yes DIMM Rank1 Address bits mirrored!!! DIMM Reference card B DIMM Manufacturer ID cd04 DIMM Part number F3-1866C9-8GSR XMP Profile 1 Max DIMMs per channel: 4 XMP Revision: 1.3 Requested voltage: 1500 mV New logging output: Revision : 11 Type : b Key : 2 Banks : 8 Capacity : 4 Gb Supported voltages : 1.5V SDRAM width : 8 Bus extension : 0 bits Bus width : 64 Optional features : DLL-Off_mode RZQ/7 RZQ/6 Thermal features : ASR ext_temp_range Thermal sensor : no Standard SDRAM : yes Rank1 Address bits : mirrored DIMM Reference card: B Manufacturer ID : cd04 Part number : F3-1866C9-8GSR XMP Profile : 1 Max DIMMs/channel : 4 XMP Revision : 1.3 Requested voltage : 1500 mV Change-Id: Iee4d7a7c0e1070706fb60d7316fad49813963b51 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14083 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-21arch/x86: honor CONFIG_X86_TOP4G_BOOTMEDIA_MAP for verstageAaron Durbin
When CONFIG_X86_TOP4G_BOOTMEDIA_MAP was introduced verstage was not updated. Correct this oversight. Change-Id: I2775c08798906ba0ba55a361407d7d2b52313229 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14142 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins)
2016-03-21MAINTAINERS: Add maintainers for power8 architectureMartin Roth
Change-Id: I0eedda5f31c2809db7871b81ceb3045b782f9df1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14126 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-03-21MAINTAINERS: Add maintainer to lint scripts, board status & payloadsMartin Roth
Change-Id: I3efd4116da1ffda2dbc768d1a447141d8ec76f81 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21payloads: Add a target to print payload git urls and directoriesMartin Roth
Being able to fetch this list will allow the jenkins builder to securely fetch the external payloads so we can start testing payload builds. Change-Id: I777229216b2f11f0f427cd5f8cfa003da4171a77 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14132 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21payloads/Makefile.inc: Clean up MakefileMartin Roth
- Instead of adding each payload to each common target, create a list and loop through the list for all of the payloads - '.phony' doesn't work - the target needs to be uppercase '.PHONY' Change-Id: I4a7712c94d0f127c2fff8cb8fada4b8132a4ab3b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14131 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21payloads/external: Rename Makefile.inc to MakefileMartin Roth
These makefiles are not included by anything, so they shouldn't be named Makefile.inc. Also, having them all be named 'Makefile' makes some other consolidation work I'm doing much easier. Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-18coreinfo: Allow numbers in addition to F keysStefan Reinauer
When using coreinfo on a serial console (at least with gtkterm, picocom and minicom on Ubuntu 15.10) you can't send F keys to the payload. Allow 1..9 for F1..F9 Change-Id: Ie3a11fa1de57c7345737a1ccaff177f407cd5e48 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14065 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-18src/arch/x86/acpi.c: Use correct host address width in DMAR ACPI tableJacob Laska
The previous implementation assumed the CPU physical address size to be 40 which is not true of all platforms. Use an existing function to obtain the correct CPU physical address to report in the DMAR ACPI table. Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3 Signed-off-by: Jacob Laska <jlaska91@gmail.com> Reviewed-on: https://review.coreboot.org/14102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-03-18mtrr: Define a function for obtaining free var mtrrFurquan Shaikh
Instead of hard-coding var mtrr numbers in code, use this function to identify the first available variable mtrr. If no such mtrr is available, the function will return -1. Change-Id: I2a1e02cdb45c0ab7e30609641977471eaa2431fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14115 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-18google/oak: Enable RAM_CODE_SUPPORTYidi Lin
BRANCH=none BUG=chrome-os-partner:50820 TEST=check /proc/device-tree/firmware/coreboot/ram-code Change-Id: I5ecf45cada7f8999ad607487d5d9281c4fb659ed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 79d2f0e183a2bde70817d673ae315709f46e3361 Original-Change-Id: I35e91b4e29f8e09acd74770715c96cf7320ac22c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332564 Original-Reviewed-by: Milton Chiang <milton.chiang@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-18mediatek/mt8173: mt6391: set VSRMCA7 to HW control by SRCVOLTENhenryc.chen
When system enters suspend, SPM will pull SRCVOLTEN low to turn off some power rails. VSRMCA7 should follow this pin to turn on/off the power. BRANCH=none BUG=none TEST=verified on Oak rev5 Change-Id: I9d81f855a74fe02a59246ce0c6a7f0e162b9fd0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d92fb1029b810028138eb91b064b63a58b82602f Original-Change-Id: I37ff0694cbd7b17d5a1ae172c463b4e6aae2b99c Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/332345 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-17build system: Allow overriding the path to the futility binaryPatrick Georgi
Change-Id: I84e68e8407149780769c3e6a1148c175e42d1025 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/14100 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16cpu/x86: compile earlymtrr.c code for romstage as wellAndrey Petrov
In order to make this work earlymtrr.c needed to be removed from intel/truxton/romstage.c. It's not a ROMCC board so there's no reason to be including .c files. Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14094 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16cpu/x86/mtrr: remove early_mtrr_* functionsAaron Durbin
I see no user of any of this code. Remove it. Change-Id: I776cd3d9ac6578ecb0fe6d98f15611e4463afb7a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14098 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16cpu/x86/mtrr: move cache_ramstage() to its only userAaron Durbin
The Intel i3100 northbridge code is the only user of cache_ramstage(). Therefore, place it next to the sole consumer. Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14097 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-16libpayload: recreate config filesStefan Reinauer
Add all the default options with: for i in configs/* do cp $i .config make savedefconfig mv defconfig $i done This also switches to minimal config files instead of the full configuration files that were previously checked in. Change-Id: If18a32eca4df9e1dfeb0e212b652d972cea8e4b8 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14077 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-16coreinfo: Rename libpayload variablesStefan Reinauer
LIBCONFIG_PATH -> LIBPAYLOAD_PATH LIBPAYLOAD_DIR -> LIBPAYLOAD_OBJ Change-Id: Idd9947bac594f5b109b877aefac70b1a1d2336eb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14099 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-16rockchip: update make_idb.pyhuang lin
make_idb.py only support RK3288 before, add chip parameter, so we can support RK3399 either. Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5 Signed-off-by: huang lin <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/13913 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16util/nvidia/cbootimage: update to latest masterPatrick Georgi
This includes a fix that allows using cbootimage with paths containing the "@" sign, which happens sometimes in jenkins configurations. Change-Id: I83154afa35b6d24449e713e57031b1a93d7ac748 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14090 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16parade/ps8640: Clean upPatrick Georgi
Sort out some style issues that were identified by Paul. Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14064 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-15coreinfo: Use tinycursesStefan Reinauer
When using PDcurses over a serial line, the background of coreinfo is not properly cleared. Hence use tinycurses, which was the only option when coreinfo was developed. Change-Id: I15bb6eb552cf924de98d09ef63be33ecf336c526 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14067 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-15pcengines/apu1: Enable USB overcurrent detection.Tobias Diedrich
The two external USB ports and the internal USB header have overcurrent protection chips with the low-active overcurrent signal connected to the chipset. The power-on default for this register disables the software detection of overcurrent conditions. After setting the register Linux correctly shows the overcurrent condition in the kernel log (tested by shorting the 5v and gnd lines on J14 / the internal USB header): [ 2015.229921] usb usb1-port3: over-current condition [ 2015.449925] usb usb1-port4: over-current condition Simlar for the external ports: [ 256.237916] usb usb1-port1: over-current condition [ 256.458084] usb usb1-port5: over-current condition Note that each signal is shared between two ports: usboc0#: External ports (port1/5) usboc1#: Internal ports (port3/4) Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/14084 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15lenovo: add config ONBOARD_VGA_IS_PRIMARYPatrick Rudolph
Fix for the T4xx and T5xx series. It does not apply to X2xx/X6x series as those have only one GPU, which is always connected to the display. The T6x series needs special care not handled with this patch. Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be deactivated in case a dedicated GPU is found and active, leaving the system without a working display. Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14031 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-03-15google/oak: add table for 4GB configurationPH Hsu
BRANCH=none BUG=chrome-os-partner:49229 BUG=chrome-os-partner:50806 TEST=power on to kernel on Oak Rev3 with 4GB dram Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14089 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15mediatek/mt8173: Enable 4GB modePH Hsu
If the system is using 4GB of memory, enable 4GB mode in the memory controller. Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14088 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15google/oak: Remove EC_SUSPEND_L from APKoro Chen
This pin is not used anymore since Rev5. BRANCH=none BUG=chrome-os-partner:49375 TEST=make and boot on Rev4/5 Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419 Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331810 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14087 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15Makefile.inc: Add toupper, tolower, and ws_to_under macrosMartin Roth
Add a few additional macros that can be used throughout the coreboot makefiles. tolower: returns the value in all lowercase toupper: returns the value in all uppercase ws_to_under: returns the value with any whitespace changed to underscores Change-Id: Icd0e6586481d8f229af0e899e0c94ef7c5c672c3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14093 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-15payloads: Enable building depthcharge as part of the coreboot buildStefan Reinauer
For CHROMEOS builds, depthcharge can be built automatically. This dependency exists because depthcharge without vboot and subsequent signing of the image doesn't work very well, and both are keyed to that flag as well. Change-Id: Id0195bd3b4e454f382782106d6512469106daac5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/10924 Tested-by: build bot (Jenkins)
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-15libpayload: Move base address, stack and heap size to KconfigStefan Reinauer
This will allow more payloads to use the standard linker script instead of implementing their own. Change-Id: Ie60120769829f427ceb722109d85859b61dbde31 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14074 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Make comment into help textStefan Reinauer
Change-Id: I8c8669e73e335e12cb3785cf84b878c305dd5929 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14068 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Fix ARM workaround codeStefan Reinauer
_LDFLAGS+="foo" did not work in my shell (bash on Ubuntu 15.10), so change it to _LDFLAGS="$_LDFLAGS foo". I'm mildly surprised that this ever worked. Change-Id: I59c10f34992240c6df2ec7f24aebc6daafb76493 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14076 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Add comment about ARM64 exception stackStefan Reinauer
Change-Id: I8b74cbf6bdde32c90ad0510e14e899711269e57f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15coreinfo: Pretty print RAM addressesStefan Reinauer
Instead of 500, print 0x00000500 in the ram dump module. Change-Id: Id250bd99f36dad4088ab88953fb371c400b4231b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14072 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Move MEMMAP_RAM_ONLY to generic optionsStefan Reinauer
MEMMAP_RAM_ONLY is not an architecture specific option, hence move it out of the architecture specific menu. Change-Id: Iaeef03ed8cbff930a580ad03b1e712087b48714e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Drop CONFIG_LP_CHROMEOSStefan Reinauer
This is adding complexity to the code more than it saves space, plus some of the tables could potentially be interesting outside of the ChromeOS context. Change-Id: I4bf24608f3e26d3b7871a5031ae8f03bc2c8c21f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14070 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Unify defconfigsStefan Reinauer
Bring defconfig and defconfig-tinycurses in sync, so that defconfig and defconfig-tinycurses only differ in the selection of the curses implementation. Change-Id: I739c5122b5aaaa2681055c845905721a0b2a11c1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14069 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15vendorcode/intel/Kconfig: Add broadwell_de symbol to fix lintMartin Roth
The Kconfig lint tool is complaining because this symbol doesn't exist. Create a temporary definition that can be removed when the chipset is added. Change-Id: I6a8abffcc91773aae16721ee1f48c4c64bd6b486 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14091 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-14genbuild_h: Fix numeric comparison to remove errorMartin Roth
Change the comparison of build_timeless from -eq to = This was generating an error if BUILD_TIMELESS wasn't set: util/genbuild_h/genbuild_h.sh: line 27: [: : integer expression expected This wasn't causing the script to fail, and won't even if 'set -e' is added to the script because the error happens inside an 'if' clause, which is specifically excluded from failue on 'set -e'. Change-Id: I6a4e147ece23e83ee682d72db35be9e5d4088c78 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14080 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-14util/cbmem: Scale time stamp values correctlyAaron Durbin
Commit c49014e (timestamp: add tick frequency to exported table) refactors the code, but forgets to correctly scale the frequency to megahertz, where the value is read from sysfs, so that printing time stamp information shows milliseconds instead of microseconds, as can be seen on the output `cbmem -t` for the ASRock E350M1 below. ``` 0:1st timestamp 515 10:start of ramstage 515 (0) 30:device enumeration 515 (0) 40:device configuration 610 (94) 50:device enable 614 (4) 60:device initialization 624 (9) 70:device setup done 639 (14) 75:cbmem post 844 (205) 80:write tables 844 (0) 90:load payload 849 (4) 15:starting LZMA decompress (ignore for x86) 849 (0) 16:finished LZMA decompress (ignore for x86) 869 (20) 99:selfboot jump 869 (0) Total Time: 350 ``` So scale the return value correctly to megahertz, by dividing it with 1000. ``` 0:1st timestamp 515,655 10:start of ramstage 515,655 (0) 30:device enumeration 515,663 (7) 40:device configuration 610,620 (94,957) 50:device enable 614,680 (4,059) 60:device initialization 624,618 (9,938) 70:device setup done 639,553 (14,934) 75:cbmem post 844,707 (205,154) 80:write tables 844,710 (2) 90:load payload 849,532 (4,821) 15:starting LZMA decompress (ignore for x86) 849,655 (123) 16:finished LZMA decompress (ignore for x86) 869,903 (20,247) 99:selfboot jump 869,922 (19) Total Time: 354,261 ``` Change-Id: Iea032c62487c7946b6194a90268755034c6350df Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14086 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-03-14vendorcode/intel/fsp1_0: Add Broadwell-DE SoC vendor codeYork Yang
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based project and is based on Broadwell-DE Gold release. Change has been verified on Intel Camelback Mountain CRB. Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/14030 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp_baytrail: Enable LPSS in ACPI modeBen Gardner
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would result in unusable devices, as the resources were set to 0 and the devices were disabled. lpss.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode set to disable and the devicetree set to default. Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp1.1: Mark graphics init done after SiliconInit phaseDuncan Laurie
If the VBT was provided to the FSP GOP driver then graphics init will be done as part of SiliconInit step and we can mark that when it is completed. This will result in the "oprom" flag being set properly in the coreboot gpio table and the netboot firmware will have video. [pg: avoided conflict with Quark that comes without silicon_init_params.GraphicsConfigPtr] BUG=chrome-os-partner:50864 BRANCH=glados TEST=boot image.net.bin on chell and get working graphics without being setuck in a reboot loop thinking graphics needs to be started when it already has been. Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331301 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240) Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5 Original-Reviewed-on: https://chromium-review.googlesource.com/331355 Reviewed-on: https://review.coreboot.org/13986 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13coreinfo: Remove the LAR moduleJonathan Neuschäfer
Since libpayload's LAR support was dropped in If6e36569cd, this module doesn't compile anymore. Change-Id: I98f25613a1728e94704d9e9ccb65fd6ba33968b9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14037 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13util/ifdtool: add option to change chip densityJan Tatje
Adds -D / --density option to change the chip density. This is only implemented for IFD version 1 as I do not have an IFD version 2 to test this. Density of both chips is changed by default, but a chip can be selected using -C / --chip. Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/14032 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Fix LPE initialization and enable ACPI modeBen Gardner
This change properly assigns resources to the LPE (Low Power Engine for Audio) and enables ACPI mode. lpe.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Don't clear gnvs in acpi_init_gnvs()Ben Gardner
That wipes out all previously stored settings and breaks running devices in ACPI mode. This more closely matches what is done in intel/baytrail. Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13abuild: Add option of starting with an existing defconfig fileMartin Roth
We want to start testing builds with additional Kconfig options to try to get more coverage. This will allow us to enable various options to test without having to add each individual option to the abuild script. Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12northbridge/intel/i82830: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i830 boards in the chipset. Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12payloads/seabios: Add "git revision" to the SeaBIOS version menuAntonello Dettori
Add an option to specify a git revision from which to build SeaBIOS. Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13937 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins)
2016-03-12intel/skylake: Do not log wake source on resetDuncan Laurie
Skip logging a wake source when just resetting without coming from S3 or S5 state. This will prevent the occasional spurious event like PCI PME from showing up in the event log. BUG=chrome-os-partner:40635 BRANCH=glados TEST=run warm reboot teset on chell and ensure no wake source is logged Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890 Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329846 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331173 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13991 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to statically clock gate 8254 timerAaron Durbin
In order to save more power by shutting down clocks add the ability to optionally clock gate the 8254 programmable interrupt timer. When doing this the platforms lose their "PC"-ness which certain payloads and OSes rely on such as SeaBIOS. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Enabled option on chell. Noted the bit is set upon booting. Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477 Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331171 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12glados/chell: send an extra VR mailbox commandRizwan Qureshi
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode has been updated since v76, and it requires an an extra VR mailbox command should be sent from coreboot to pcode. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low CQ-DEPEND=CL:329393 Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2 Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1 Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329480 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12vendorcode/intel/fsp/fsp1_1/skylake: update FspUpdVpd.h 1.9.0Aaron Durbin
The previous copy of FspUpdVpd.h was not up to date w.r.t. the FSP release being used for skylake boards. Fix that. BUG=chrome-os-partner:50863 BRANCH=None TEST=Built and booted on chell. Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7 Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331290 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13984 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12mediatek/mt8173: memlayout: Create DRAM DMA region for NOR flash DMA read.Yidi Lin
NOR flash has a hardware limitation that it can't access SRAM region after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000 for NOR flash driver. So that the NOR flash driver can use this region after 4GB mode is enabled. BRANCH=none BUG=chormoe-os-partner:49229 TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram. And check /proc/meminfo. Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327962 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331177 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: detect sdram size at runtimeYidi Lin
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect the DRAM size at runtime. BUG=chrome-os-partner:49427 BRANCH=none TEST=Boot to kernel Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223 Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327961 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331176 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: mmu: update mmu range before DRAM is initialized.Yidi Lin
The DRAM size can not be determined before DRAM is initialized. Since mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of 2GB DRAM address before DRAM is initialized. BRANCH=none BUG=none TEST=boot to kernel Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327960 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331175 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12Add a driver for the parade ps8640Jitao Shi
BRANCH=none BUG=none TEST=none Change-Id: Icf397ce2ffdaed5048367daf2086c067984fea0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b5a88793ccfc46af196300791a300be67b70f5b1 Original-Change-Id: I75adf2688c9c8b9a2338f7dee5d0ac10e7181529 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321056 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: pll: raising the CPU core frequencyYidi Lin
Runs the LITTLE core at highest freqency to speed up the boot time. Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.) BRANCH=none BUG=chrome-os-partner:47422 TEST=flash the bootloader and measure the boottime by cbmem result Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161 Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324685 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: add NOR DMA readBayi Cheng
BRANCH=none BUG=none TEST=boot oak to kernel on rev2 Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323932 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13979 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12device/i2c: Add i2c_read_bytes() APIJitao Shi
Add multi-bytes read support. BRANCH=none BUG=none TEST=saw edid log and dev screen Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306 Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/325211 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13978 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure USB OC pinsYidi Lin
BRANCH=none BUG=none TEST=none Change-Id: If7244d0050833c676de72106d1c8473dd8f290a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89356785e66eb6d5b52fdf09933d2d28d9f67a90 Original-Change-Id: I94dda9834da6553795e7f3f65ff267fdcb6b7d47 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321055 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13977 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config USB Hub for rev5Ben Lok
Reset pin of USB Hub is connected to GPIO118, it is low active. Config GPIO118 as GPO and output high. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321054 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13976 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config audio for rev5Koro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ibdafa4ffe0baf5231654e67612b7ca59d835b602 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63fedfec26ba1444934e348ce59609fa88e12de5 Original-Change-Id: Ifbbf8d2b3b6e163481843308c2e3edc4a55f90c6 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319988 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Remove obsolete Rev0 settingKoro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I65aa87e88cf812fdb490933de1a3b121866a2694 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f703f7e71ae6ffc0f1ac0e70486d087a28da5ba Original-Change-Id: I8d794464d45ea69f9a46f7ebc505f6ec2127f204 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319987 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13974 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Enable TP_SHIFT_EN for the revisons before 5 onlyYidi Lin
BRANCH=none BUG=none TEST=emerge coreboot Change-Id: Ic46490a56a6a8146b91a055b9ce5d5bb23bc7a49 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 082ce1848bf37bba369fd0dccc4cf3fc83a8a018 Original-Change-Id: I58f009d2fc03cf5a52b4dbd042a92973cde4d035 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320029 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13973 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: da9212 gpio configuration for rev5henryc.chen
BRANCH=none BUG=none TEST=none Change-Id: Ib44a9e8ca94727809e47831228f4742c25a53977 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: da9185c22264440da822aa252c0c5d2aef78b455 Original-Change-Id: I98c2ad757d0cd0e3234e49392091784b43a106e7 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320028 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13972 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config PANEL_LCD_POWER_EN for rev5Yidi Lin
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ic2019a1d61cbc5949c1f42346b279ef05f725dfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bf13606f01438bc2ea27ecccc6359a7320dc34cc Original-Change-Id: I3fcc403cb7a3429b9673be0e727fc7d8c9d4f556 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320027 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13971 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure SPI_LEVEL_ENABLE pin for rev5Yidi Lin
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320026 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13970 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Update infracfg register mapMilton Chiang
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ifdeb686f7695fbefadc15d47e9b0c49b6b35c37d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2404a31dac8c84580424fc01816669b27ddf8617 Original-Change-Id: I831d34b1bce2675caa3da8da7a214f392e561000 Original-Signed-off-by: Milton Chiang <milton.chiange@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320025 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13969 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: add event logCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:56:53 +0000