summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-01exynos5250: #define the dram controller interleaving sizeDavid Hendricks
Change-Id: Iab184aa85be68b6ca5107d278d2fe821e5b2e611 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2255 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-01lib: Prevent unaligned memory access and fix endianess in LZMA decode library.Hung-Te Lin
LZMA decode library used to retrieve output size by: outSize = *(UInt32 *)(src + LZMA_PROPERTIES_SIZE); 'src' is aligned but LZMA_PROPERTIES_SIZE may refer to an unaligned address like src+5, and using that as integer pointer may fail on platforms like ARM. Also this will fail on systems using big-endian (outSize was encoded in little-endian). To fix this, reconstruct outSize in little-endian way. Change-Id: If678e735cb270c3e5e29f36f1fad318096bf7d59 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2246 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-01cbfstool: move flat-binary parsing to cbfs-mkpayload.Hung-Te Lin
The ELF parsing and payload building in add-flat-binary command should be isolated just like mkpayload and mkstage. Since the add-flat-binary command creates a payload in the end , move payload processing to cbfs-mkpayload.c. To test: cbfstool coreboot.rom add-flat-binary -f u-boot.bin -n fallback/payload \ -l 0x100000 -e 0x100020 To verify, get output from "cbfstool coreboot.rom print -v": fallback/payload 0x73ccc0 payload 124920 INFO: code (no compression, offset: 0x38, load: 0x1110000, length:..) Change-Id: Ia7bd2e6160507c0a1e8e20bc1d08397ce9826e0d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2197 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-01cbfstool: Add -v (verbose) output.Hung-Te Lin
Add -v (verbose) to every command, and allow printing debug messages. Revise logging and debugging functions (fprintf(stderr,...), dprintf...) and verbose message printing with following macros: ERROR(xxx): E: xxx WARN(xxx) W: xxx LOG(xxx) xxx INFO(...) INFO: xxx (only when runs with -v ) DEBUG(...) DEBUG: xxx (only when runs with more than one -v) Example: cbfstool coreboot.rom print -v cbfstool coreboot.rom add -f file -n file -t raw -v -v Normal output (especially for parsing) should use printf, not any of these macros (see usage() and cbfs_locate(), cbfs_print_directory() for example). Change-Id: I167617da1a6eea2b07075b0eb38e3c9d85ea75dc Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2196 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-01Fam15tn: Move SPD read from mainboards into wrapperMartin Roth
Continuing with the mainboard cleanup for F15tn, move the functions to read the SPD from the mainboards for Thatcher and Parmer into the wrapper for the northbridge/amd/agesa/family15tn. Move the SPD address customization for the mainboard into the devicetree.cb file. Unrelated side note - Porting.h has an un-closed #pragma pack(1) that can cause confusing side-effects. AGESA's structures all use this, but coreboot's don't. Be sure to include the coreboot .h files BEFORE Porting.h is included, not after. This fix has been tested. Change-Id: I89cdd225be61f60c6b8e7020e6f8b879983bbd96 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2190 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
2013-02-01armv7: unify stage hand-off routinesDavid Hendricks
This replaces the current stage-specific exit/entry functions with generic versions. Now all stages compile with stage_entry(), which is placed at .text.stage_entry.armv7, and stage_exit(). Snow's ramstage files are also updated to avoid build breakage. Change-Id: I953a2c4b8121bd4b66c3362557997a9ca3aa53b0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2254 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-31Improve how our printk calls do_div by using constants.Ronald G. Minnich
The do_div code has a nice optimization in it when it is called with constants. The current highly generalized use of it defeats those optimizations and causes trouble on ARM, resulting in a complex and buggy code path. Since we only need to print in bases 8, 10, and 16, do a minor restructuring of the code so that we call do_div with constants. If you need base 2, print in base 16 and do it in your head. :-) This fixes an ongoing problem with ARM, will not harm X86, and will help PPC should we ever want to support it again. Plus, I don't have to ever try to understand the div64 assembly and where it's going wrong :-) Change-Id: I6a480011916eb0834e05c5bb10909d83330fe797 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2235 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-30armv7: don't hang on divide by zeroRonald G. Minnich
People make mistakes. Hanging the box is not a good reason to kill the firmware, esp. since this is probably happening in a printk. The only issue with the recursive call to printk is that we may deadlock if we have locked something. But we can at least try. Hanging is certainly not what we want ... Change-Id: Ib3bc87bc395ae89e115cf6d042f4167856422ca1 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2233 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-01-30Exynos5250: Get DDR3 working by changing what is compiled and add a functionRonald G. Minnich
This is a minor set of changes to get DDR3 going. Move compilation of DDR3 startup to the romstage. Fix a prototype that was missing a void. Remove a function that is overly flexible, and even though it is overly flexible only actually can handle one type of RAM. Mainboards only support one type of DRAM, so create a function to explicitly initialize the type of DDR we have -- DDR3. With these changes, and the previous changes, google snow is ready to run the ramstage. Change-Id: I37e0ab0d2dbc1dd121fb175386a46bc2fb1285e5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2224 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-30Add a clean target to the run firmware (runfw) MakefileRonald G. Minnich
It's just good hygiene. Change-Id: Ie7d4557c1d0dcf7fc015852c4c9b2eae29c4acfc Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2232 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-30armv7: Add SPI driver for Exynos.Hung-Te Lin
The SPI flash driver for Exynos chipset. Verified to boot on snow/armv7. Change-Id: I7eef67a9c57f825d09f13ea44c2b59b54345fa7b Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Extend CBFS to support arbitrary ROM source media.Hung-Te Lin
Summary: Isolate CBFS underlying I/O to board/arch-specific implementations as "media stream", to allow loading and booting romstage on non-x86. CBFS functions now all take a new "media source" parameter; use CBFS_DEFAULT_MEDIA if you simply want to load from main firmware. API Changes: cbfs_find => cbfs_get_file. cbfs_find_file => cbfs_get_file_content. cbfs_get_file => cbfs_get_file_content with correct type. CBFS used to work only on memory-mapped ROM (all x86). For platforms like ARM, the ROM may come from USB, UART, or SPI -- any serial devices and not available for memory mapping. To support these devices (and allowing CBFS to read from multiple source at the same time), CBFS operations are now virtual-ized into "cbfs_media". To simplify porting existing code, every media source must support both "reading into pre-allocated memory (read)" and "read and return an allocated buffer (map)". For devices without native memory-mapped ROM, "cbfs_simple_buffer*" provides simple memory mapping simulation. Every CBFS function now takes a cbfs_media* as parameter. CBFS_DEFAULT_MEDIA is defined for CBFS functions to automatically initialize a per-board default media (CBFS will internally calls init_default_cbfs_media). Also revised CBFS function names relying on memory mapped backend (ex, "cbfs_find" => actually loads files). Now we only have two getters: struct cbfs_file *entry = cbfs_get_file(media, name); void *data = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, name, type); Test results: - Verified to work on x86/qemu. - Compiles on ARM, and follow up commit will provide working SPI driver. Change-Id: Iac911ded25a6f2feffbf3101a81364625bb07746 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Rename family15 pci northbridgeops functions.Steven Sherk
This is a port of the following commit 8a49ac7f808f76821e7d63070420cfd98f707c7c Rename fam14 pci northbridge ops functions. Clarify the northbridge ops function names. original-Change-Id: If7d89de761c1e22f9ae39d36f5cf334cc2910e1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id7889bf02e2696220081251acdf695327267c796 Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/2225 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-30Rename family15tn pci northbridgeops functions.Steven Sherk
This is a port of the following commit 8a49ac7f808f76821e7d63070420cfd98f707c7c Rename fam14 pci northbridge ops functions. Clarify the northbridge ops function names. original-Change-Id: If7d89de761c1e22f9ae39d36f5cf334cc2910e1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icda3ec58219baa177af3b1dce729c6ad1f744be8 Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/2226 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-30libpayload: Update README with Git repository URL and directory locationPaul Menzel
Change-Id: I3e068f5e6c1eb875df0885c0ce43a03082be31a5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2228 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30Family 14: Update for string portability.Mike Loptien
Update function messages to be more portable by using the __func__ compiler command instead of hard coded function names. Change-Id: I6327c9769c2544bbc56155a2f89afd767487faf6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2227 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-30Project PIANO aka tianocorebootStefan Reinauer
This is a Tiano Core loader payload based on libpayload. It will load a Tiano Core DXE core from an UEFI firmware volume stored in CBFS. Currently Tiano Core dies because it does not find all the UEFI services it needs: coreboot-4.0-3316-gc5c9ff8-dirty Mon Jan 28 15:37:12 PST 2013 starting... [..] Tiano Core Loader v1.0 Copyright (C) 2013 Google Inc. All rights reserved. Memory Map (5 entries): 1. 0000000000000000 - 0000000000000fff [10] 2. 0000000000001000 - 000000000009ffff [01] 3. 00000000000c0000 - 0000000003ebffff [01] 4. 0000000003ec0000 - 0000000003ffffff [10] 5. 00000000ff800000 - 00000000ffffffff [02] DXE code: 03e80000 DXE stack: 03e60000 HOB list: 03d5c000 Found UEFI firmware volume. GUID: 8c8ce578-8a3d-4f1c-9935-896185c32dd3 length: 0x0000000000260000 Found DXE core at 0xffc14e0c Section 0: .text size=000158a0 rva=00000240 in file=000158a0/00000240 flags=60000020 Section 1: .data size=00006820 rva=00015ae0 in file=00006820/00015ae0 flags=c0000040 Section 2: .reloc size=000010a0 rva=0001c300 in file=000010a0/0001c300 flags=42000040 Jumping to DXE core at 0x3e80000 InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 3E96708 HOBLIST address in DXE = 0x3E56010 Memory Allocation 0x00000003 0x3E80000 - 0x3EBFFFF FV Hob 0xFFC14D78 - 0xFFE74D77 InstallProtocolInterface: D8117CFE-94A6-11D4-9A3A-0090273FC14D 3E95EA0 InstallProtocolInterface: EE4E5898-3914-4259-9D6E-DC7BD79403CF 3E9630C Security Arch Protocol not present!! CPU Arch Protocol not present!! Metronome Arch Protocol not present!! Timer Arch Protocol not present!! Bds Arch Protocol not present!! Watchdog Timer Arch Protocol not present!! Runtime Arch Protocol not present!! Variable Arch Protocol not present!! Variable Write Arch Protocol not present!! Capsule Arch Protocol not present!! Monotonic Counter Arch Protocol not present!! Reset Arch Protocol not present!! Real Time Clock Arch Protocol not present!! ASSERT_EFI_ERROR (Status = Not Found) ASSERT /home/reinauer/svn/Tiano/edk2/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c(461): !EFI_ERROR (Status) Change-Id: I14068e9a28ff67ab1bf03105d56dab2e8be7b230 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2154 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-30ASRock E350M1: Remove unused variable `reg8` from `romstage.c`Paul Menzel
[…] CC romstage.inc src/mainboard/asrock/e350m1/romstage.c: In function 'cache_as_ram_main': src/mainboard/asrock/e350m1/romstage.c:48:5: warning: unused variable 'reg8' [-Wunused-variable] This change was already done for AMD Persimmon in the following commit. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Change-Id: I8f1ae1a609b87b197583934f0556f66b64e6994d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2230 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-01-30cbfstool: Prevent file name to be corrupted by basename().Hung-Te Lin
Calling basename(3) may modify content. We should allocate another buffer to prevent corrupting input buffer (full file path names). Change-Id: Ib4827f887542596feef16e7829b00444220b9922 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2203 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-29Exynos5250: change all unsigned with no type to 'unsigned int'Ronald G. Minnich
At some point we did a lot of cleanup to replace bare 'unsigned' with 'unsigned int'. Do that work for this imported code as well. At some point, we may find we can shrink these 'int's to something smaller, thought I very much doubt it's worth the trouble. Change-Id: Ic3da491c0188c56c836f8b9c4c8f26a31b4b3573 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2223 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29Exynos5250: add debug prints to DDR3 startup code.Ronald G. Minnich
It can be handy to have debug prints as DRAM is started up, so that in the case of failure (does that ever happen?) you've got some idea where it failed. This patch adds some DEBUG_SPEW prints to the DDR3 code. I am doing this as its own CL because we may find we want to revert it. That's unlikely but it is not impossible if we skew the timing in some way. This code works for some trivial DRAM tests. Change-Id: I57e8d2a2d8df6b8ec8cd0d414681fc513e9999e3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29Exynos5250: make vendor enums in the timing array more debuggable.Ronald G. Minnich
The timing array is crucial to proper operation of DRAM. Getting a valid pointer to it is hence very important. Unfortunately, the constants chosen for the vendor were '1', and '2', (this in a 32-bit word) which in a debug print makes it almost impossible to tell if you've got a misaligned pointer. Note: coreboot people did not choose them :-) So, give them values which are extremely unlikely to occur elsewhere in the array (or in memory, for that matter). Given the frequency with which this check occurs, i.e. once, I would much prefer strings but I expect I'd get shouted down on that one. Constants in this case are an almost useless optimization but we'll go with them for now. Note no space is saved by not using strings: there's an entire function somewhere devoted to mapping the enum to a string! Debug prints of pointers to structs in this array are now far more useful than they were. See snarky comment in the code (left there to make sure nobody gets tempted to get fancy again). Comment now less snarky. This is tested on google snow to the point that the DRAM works. Change-Id: I30bc44719f321f791fd82ded60e29393399d9e3d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2221 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-01-29cbfstool: Change "locate" output to prefix "0x".Hung-Te Lin
Currently "cbfstool locate" outputs a hex number without "0x" prefix. This makes extra step (prefix 0x, and then generate another temp file) in build process, and may be a problem when we want to allow changing its output format (ex, using decimal). Adding the "0x" in cbfstool itself should be better. Change-Id: I639bb8f192a756883c9c4b2d11af6bc166c7811d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2201 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29cbfstool: Remove unused header files.Hung-Te Lin
cbfs-mk*.c does not work with real files / command line so header files with file I/O and getopt can be removed. Change-Id: I9d93152982fd4abdc98017c983dd240b81c965f5 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2200 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-01-29armv7: Clean up the mmu setup a bitRonald G. Minnich
The previous incarnation did not use all of mmu_setup, which meant we did not carefully disable things before (possibly) changing them. This code is tested and works, and it's a bit of a simplification. Change-Id: I0560f9b8e25f31cd90e34304d6ec987fc5c87699 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2204 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-01-29armv7: nuke global_data.h and remove some references to gd structDavid Hendricks
This begins to remove references to global data which u-boot used. There are still many commented out references to gd-> and bd-> which we'll fix once we're happy with the replacements. Change-Id: Ie1b40a997e28a118f8f3ad96a2f9a2462d32fbe3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2210 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-29armv7: Clean out weak symbols and unnecessary #ifdef's in cache filesDavid Hendricks
This just removes unused code. If for some reason we don't want to initialize cache, then the CPU or mainboard specific init routines don't need to call these. Change-Id: Ieb7393b6cbc103e490753da4ed27114156466ded Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2209 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-28AMD/Persimmon: DP0 is connected to a LVDS connectorDave Frodin
This change is required in order to use a LVDS panel attached to the LVDS connector. Change-Id: Id97c233f964151b6515bd46c797425d0e6690cbd Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2188 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-28cbfstool: Store global variables into struct.Hung-Te Lin
cbfstool.c uses lots of global variables for command line options and all named as "rom*". This may be confusing when other global variables also start with rom, ex: int size = rom_size + romsize; (rom_size is from command line and romsize is the size of last loaded ROM image). If we pack all rom_* into a struct it may be more clear, ex: do_something(param.cbfs_name, param.size, &romsize); Change-Id: I5a298f4d67e712f90e998bcb70f2a68b8c0db6ac Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2195 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-28msrtool: Decoding for most of Intel Core 2 MSRsAnton Kochkov
Added bits/bitfields descriptions and decoding values into intel_core2_later.c file, which describe MSRs for Intel processors, based on later Core 2 architecture. Change-Id: If577c8ed944afe34f86944cc03a780fba6b3dbba Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1171 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-27ioapic: Factor out counting code to `ioapic_interrupt_count`Patrick Georgi
No need to keep duplicate variants of counting ioapic interrupts. Change-Id: I512860297309c46e05cc5379bf61479878817b1e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2185 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-26AMD boards, ASRock E350M1: Remove whitespace in front of comma in DSDTPaul Menzel
commit 585a4006976e903599b7128200a29b5729777818 Author: zbao <fishbaozi@gmail.com> Date: Thu Apr 12 11:27:26 2012 +0800 Leverage the Pstate table created by AGESA. … introduced unneeded whitespace in front of a comma. Revert that part of the above commit. In the file for AMD Dinar tabs and spaces are mixed, but leave that alone for the beginning. Change-Id: I279cd0cb0be8c79258034733773f2ae1c2207cce Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2187 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-01-25inteltool: Add support for Atom N455 (0x106c0) in CPU MSRs dumpOlivier Langlois
reference for Atom MSRs are from Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3C: System Programming Guide, Part 3 Order Number 326019, January 2013, Table 35-4, 35-5 Has been successfully tested on the targeted cpu. Change-Id: If94279caeab27121c63ec43c258dc962c167ad51 Signed-off-by: Olivier Langlois <olivier@olivierlanglois.net> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2192 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-25libpayload: use $(DOTCONFIG) instead of .configStefan Reinauer
When overriding the DOTCONFIG variable, make install will fail in libpayload. Change-Id: I332be3a4ca2620a32a6f5fbe683e6c71f0d6a9e9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2178 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-25AGESA: Kconfig: Drop useless depends statementPatrick Georgi
`depends on FOO` in if FOO ... depends on FOO endif is useless. Introduced in commit 4b508341bcf11687be98d20f8178b5cc542a0842 Author: efdesign98 <efdesign98@gmail.com> Date: Wed Jul 13 17:16:13 2011 -0700 Add AMD Family 10 support to cpu folder and probably copied later on in the following commit. commit d3e990c6e5124f30b394f5dbd4902ea8bf341b07 Author: Kerry Sheh <shekairui@gmail.com> Date: Tue Feb 7 20:31:35 2012 +0800 AGESA F15: AGESA family15 model 00-0fh cpu wrapper Change-Id: I67cf231e3047a07cb6f0eeb5f77be368674a0603 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2186 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Hengelein <ilendir@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-23clear_ioapic: Fix reading of number of interrupts for IO-APICsAladyshev Konstantin
Apply the same fix for `setup_ioapic` as done in the following commit. commit 23c046b6f16805ff0131460189967bf261d704de Author: Nico Huber <nico.huber@secunet.com> Date: Mon Sep 24 10:48:43 2012 +0200 Fix reading of number of interrupts for IO-APICs The number read from the io-apic register represents the index of the highest interrupt redirection entry, i.e. the number of interrupts minus one. Change-Id: I54c992e4ff400de24bb9fef5d82251078f92c588 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1624 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I7b730d016a514c95c3b32aee6f31bd3d7b2c08cb Signed-off-by: Aladyshev Konstantin <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/2043 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-22Add MMCONF resource to AMD fam14 PCI_DOMAIN.Marc Jones
The coreboot resource allocator doesn't respect resources claimed in the APIC_CLUSTER. Move the MMCONF resource to the PCI_DOMAIN to prevent overlap with PCI devices. Change-Id: I8541795f69bbdd9041b390103fb901d37e07eeb9 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2167 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Steve Goodrich <steve.goodrich@se-eng.com>
2013-01-22util/runfw/googlesnow.c: Remove trailing whitespacePaul Menzel
$ git stripspace < util/runfw/googlesnow.c > /tmp/bla $ mv /tmp/bla util/runfw/googlesnow.c Introduced with original commit. commit b867281a07addd1eb00f964ff4f8727664e13e19 Author: Ronald G. Minnich <rminnich@gmail.com> Date: Wed Jan 16 11:59:34 2013 -0600 Utility to run the snow bios in user mode Change-Id: I146c07a918ef99e8ae3c0dd72cf28fae22312e43 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2183 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-22Rename fam14 pci northbridge ops functions.Marc Jones
Clarify the northbridge ops function names. Change-Id: If7d89de761c1e22f9ae39d36f5cf334cc2910e1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/2166 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-01-22F15tn: Fix all warnings, enable warnings as errorsMartin Roth
Enable 'all warnings being treated as errors' in thatcher and parmer. Fixed the following warnings on parmer / thatcher: src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c: In function 'GetGlobalCpuFeatureListAddress': src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c: In function 'SaveDeviceContext': src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c: In function 'GetPstateGatherDataAddressAtPost': src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuPostInit.c:235:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c: In function 'MemNInitNBDataTN': src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:353:32: warning: assignment from incompatible pointer type [enabled by default] src/vendorcode/amd/agesa/f15tn/Proc/Mem/NB/TN/mntn.c:363:23: warning: assignment from incompatible pointer type [enabled by default] src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c: In function 'GetGlobalCpuFeatureListAddress': src/vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatureLeveling.c:291:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c: In function 'SaveDeviceContext': src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:245:18: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] src/vendorcode/amd/agesa/f15tn/Proc/CPU/S3.c:309:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:37:0: src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0: warning: "TOP_MEM" redefined [enabled by default] src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0: warning: "TOP_MEM2" redefined [enabled by default] src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition In file included from src/northbridge/amd/agesa/family15tn/northbridge.c:41:0: src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuRegisters.h:378:0: warning: "LOCAL_APIC_ADDR" redefined [enabled by default] src/include/cpu/x86/lapic_def.h:9:0: note: this is the location of the previous definition In file included from src/mainboard/amd/parmer/BiosCallOuts.h:24:0, from src/mainboard/amd/parmer/mainboard.c:28: src/vendorcode/amd/agesa/f15tn/AGESA.h:1547:0: warning: "TOP_MEM" redefined [enabled by default] src/include/cpu/amd/mtrr.h:31:0: note: this is the location of the previous definition src/vendorcode/amd/agesa/f15tn/AGESA.h:1548:0: warning: "TOP_MEM2" redefined [enabled by default] src/include/cpu/amd/mtrr.h:34:0: note: this is the location of the previous definition Change-Id: Iecea28232f1761401cf09f7d2a77d3fbac2f5801 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2171 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-22src/lib/timestamp.c: Fix spelling of tim*e*stampPaul Menzel
Change-Id: I96d41882c92e577ce816264c493376d2f2d950f6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2181 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-01-22Hudson: Legacy free question is hudson onlyMartin Roth
The "system is legacy free" question accidentally escaped from the hudson Kconfig where it was intended to stay and went coreboot-wide. This puts it back inside the boundries of the hudson southbridge where it belongs. I also commented the endif statements to make it easier to tell where things belong. Change-Id: I49f7a5eadb96d40c6101a93bc390e644617a5654 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2179 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-22armv7: add ARM-encoded bootblock_exit() stubDavid Hendricks
This replaces the call() function with a stub which is compiled separately using -marm. See http://review.coreboot.org/#/c/2175/ for details. Change-Id: I7f8c45b5e63ec97b0a82294488129d1c97ec0cbf Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2180 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-21Hudson: Cleanup - change SB800 references to hudsonMartin Roth
Go through southbridge/amd/agesa/hudson, thatcher and parmer mainboard directories and change all references to sb800 to reference hudson instead. This is just cleanup and should make no functional difference. Change-Id: Icd6a9a08c4bbf5e1aed394362d24c05811ed1fba Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2177 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-01-21AGESA F15tn: Move callouts into northbridge wrapperMartin Roth
There are currently too many things in the mainboard directories that are really more suited to being in the northbridge / southbridge wrappers. This is a start at moving some of those functions down into the wrappers. Move the bios callback functions into the northbridge/amd/agesa/family15tn directory from the mainboard directories. These can still be overridden by any mainboard just by updating the pointer in the callback table to point to a customized version of the function. Change-Id: Icefaa014f4a4abbe51870aee7aa2fa1164e324c1 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2169 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-21Save and restore F15TN graphics command registerMartin Roth
In the AGESA routine GfxInitSview() called in the S3save path, the IO Space bit was getting cleared from the command register. This kept seabios from initializing the video bios. If the vbios was loaded by coreboot, this routine was skipped, allowing seabios to initialize vbios as well. I have modified the routine to save and restore the command register instead of clearing the IO Space bit. Change-Id: I756b0606adbc47da96780308c911852e39f547c7 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2172 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-21Hudson: Changes to support agesa/hudson for legacy freeMartin Roth
Add Kconfig option for Legacy free and hook it into the parmer AGESA initialization as well as the FADT code. This should really be done inside the southbridge wrapper and not in the mainboard, but for now the code to attach it to is inside the mainboard. Update Kconfig for parmer and thatcher to default to legacy free. Change-Id: Ib899bd02ddc5506caae4aca2c589cc2526638cb8 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2157 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-21Hudson: Changes to agesa/hudson FADT for ACPI 3.0Martin Roth
Update the southbridge/amd/agesa/hudson FADT generation for ACPI 3.0 compliance similar to what was done for cimx/SB800/fadt.c in commit 9aa4389. commit 9aa43892e6899b719fe7f4754901a0eae379a934 Author: Martin Roth <martin@se-eng.com> Date: Fri May 25 12:23:32 2012 -0600 Update SB800 CIMX FADT According to the datasheet, PMA_CNT_BLK is no longer available and PM2_CNT_BLK should not be used. Setup for these has been removed from the table and .h file. Change-Id: Ied8eb1f26b4aa364d051ec5f7ed6f482bb440957 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2140 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-21F15tn / Hudson: Change SATA NumOfPorts register settingMartin Roth
The Number of Ports register says that it should be set to the maximum number of ports supported by the silicon. AGESA was setting this to be the number of enabled ports. If port 1 was the only port with a drive, this value got set to 0, indicating 1 port. This causes SeaBIOS to only look at port 0 and quit, never finding the drive on port 1. Dave Frodin: I also verified that this patch allows a SATA drive plugged into port 2 to be detected without a device in port 1. Change-Id: I5d49e351864449520e3957bbb07edf0f3ec2fd47 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2165 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-21Parmer / Thatcher: devicetree.cb cleanup and whitespaceMartin Roth
Re-formatting and cleaning up the devicetree.cb files for parmer and thatcher. Change-Id: Ic458e59701c1f2593b0a035b96cac60df476ee82 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2164 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Zheng Bao <zheng.bao@amd.com>
2013-01-21F15tn: Modify devicetree to fix S3 resumeMartin Roth
The way that devicetree.cb was configured for the family 15tn boards was doing... interesting things to the video device initialization. This was causing S3 resume to fail. There is a disconnect between how the devicetree should be configured if there are multiple HT links on the CPU and how it's configured if there's only one HT link. These platforms were set up as if they had multiple HT links, which was causing duplicate instances of devices in the device list. The scan for the IO Hub was removed from the northbridge code which isn't a problem for F15tn devices. Change-Id: I3556b43027746e36b07de7cb1bece4d1b37a3c34 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2160 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-19Utility to run the snow bios in user modeRonald G. Minnich
This program lets you test run a snow coreboot image in user mode on a properly equipped arm system (usually an ARM chromebook). This is a real time saver as you don't have to flash each time. We've found and fixed some nasty bugs with this one. Anyway, the instructions on how to use this are in the binary. Change-Id: Ib555ef51fd7e930905a2ee5cbfda1cc6f068278e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2159 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-19Add more information to the cbfstool printStefan Reinauer
Show what's in a stage or payload. This will let people better understand what's in a stage or payload. Change-Id: If6d9a877b4aedd5cece76774e41f0daadb20c008 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2176 Tested-by: build bot (Jenkins)
2013-01-19armv7/snow: get to romstageDavid Hendricks
This patch does a few things to get us into romstage: - Add romstage as a stage (a later patch adds it as a binary, which is probably wrong). The Makefile magic is complex enough that we let it build the XIP file for now, but we no longer use it. - Replace findstage with loadstage. Loadstage will find a stage, load the code to memory, and zero the remaining part of memory. Now we can link the romstage to go anywhere! - Eliminate magic offsets from code/ldscripts and centralize Kconfig variables in src/cpu/samsung/exynos5250/Kconfig. - Tidy up code and serial output Change-Id: Iae4d2f9e7f429cb1df15d49daf9a08b88d75d79d Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2174 Tested-by: build bot (Jenkins)
2013-01-19Update gcov patch in documentationStefan Reinauer
.. to reflect the recent changes w.r.t avoiding trouble with the coreboot pre-commit hooks. and fix two whitespace errors. Change-Id: I6c94e95dd439940cf3b44231c8aab5126e9d45c7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-01-18armv7: add a wrapper for romstage's main() for ARM ISAGabe Black
This adds a wrapper around main() in romstage which is compiled using -marm. This assumes that the bootblock branches to romstage in ARM mode. The long-term idea is to enforce ABI compatibility when handing off to the next stage by using shims which are which are compiled in a pre- determiend manner and leave the main portions of each stage up to whatever the compiler wants. So it will eventually look like this: 1. bootblock_main (ARM/Thumb) 2. bootblock_exit (ARM) 3. romstage_entry (ARM) 4. romstage_main (ARM/Thumb) (credit to Gabe Black for writing the patch, I'm just uploading it) Change-Id: I4fdb8d2c6c2c0a7178bcb9154c378ddce0567309 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/2175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-18Snow bootblock (bloated/debug version)David Hendricks
This is the bloated Snow bootblock which includes: - SPI driver - UART, including requisite I2C, Maxim PMIC, and clock config code. - Adjustments for magic offsets (id section, stack pointer address) This is just a temporary solution until we have romstage loading. Once that happens, we'll rip out all but the code necessary for copying SPI ROM content into SRAM. Change-Id: I2a11e272eb9b6f626b5d9783eabb4a720a1d06be Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2170 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17Fix the stack setup code so we can use an arbitrary 32-bit valueRonald G. Minnich
We've had obscure errors as the size of the bootblock changes. This fix allows us to use a 32-bit constant. Please test on real hardware before you ack. Change-Id: Ic3d9f4763554bd6104ae9c4ce5bbacd17b40872c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2168 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-01-17make main() in snow's romstage.c our romstage entry pointDavid Hendricks
Our earlier attempt was jumping straight from asm to the old u-boot board_init_f in lowlevel_init_c.c. We are getting ready to transition to using a real bootblock for ARM, so add romstage.c to the files compiled and we'll make main() our entry point. This also updates romstage.ld to place main() (*(.text.startup)) at the beginning of romstage. Change-Id: Ifc77a6bfba27d915c4cad62c6c8040665294628a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2163 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17make crossgcc: compile all required toolchainsStefan Reinauer
The ARMv7 toolchain is now also needed for abuild (at least if you want to be able to compile ARM images) Change-Id: If1253203a2198f7dea632ba45540222ba3361932 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2147 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-17remove argument in snow's romstage main()David Hendricks
We don't pass any arguments into romstage on ARM. Change-Id: I018f28a57fc486c9240345cf0f4043b79027d864 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2162 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17bootblock_cpu_init() stub for exynos5250David Hendricks
This adds a stub for bootblock_cpu_init() for exynos5250. It will eventually contain code to copy ROM content from SPI to SRAM. Change-Id: I26ee62a1e701013f38f76f200579faa680530860 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17armv7: Place reset vector + CBFS header + bootblock dynamicallyDavid Hendricks
This replaces hard-coded bootblock offsets using the new scheme. The assembler will place the initial branch instruction after BL1, skip 2 aligned chunks, and place the remaining bootblock code after. It will also leave an anchor string, currently 0xdeadbeef which cbfstool will find. Once found, cbfstool will place the master CBFS header at the next aligned offset. Here is how it looks: 0x0000 |--------------| | BL1 | 0x2000 |--------------| | branch | 0x2000 + align |--------------| | CBFS header | 0x2000 + align * 2 |--------------| | bootblock | |--------------| TODO: The option for alignment passed into cbfstool has always been 64. Can we set it to 16 instead? Change-Id: Icbe817cbd8a37f11990aaf060aab77d2dc113cb1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2148 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-17ARM bootblock approachDavid Hendricks
This lays out the groundwork for using a proper bootblock on ARM. Currently we bypass the bootblock entirely and go straight to romstage. However we want to utilize CBFS to maximize flexibility of placing code without relying on a lot of magic numbers which will break depending on the SoC in use. Change-Id: I9cc2a8191d2db38b27b6363ba673e5a360de9684 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2118 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-16Fix high dword of MTRR mask set with CONFIG_CPU_ADDR_BITSMartin Roth
Bits were being shifted off the end of the mask accidentally. This results in all masks being 32 bits wide instead of 48. Change-Id: I5f4d1b6a323df1aa4568ff4491f82447b8a2f839 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2146 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-01-16use a relative path for #line 3David Hendricks
The current path doesn't make much sense (unless you're Sven) and may also incur a very long access penalty if /home happens to be on a network mounted filesystem. Change-Id: I8cfceb3cf237757ce9ea8f1953bce5a72691838a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2153 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-16armv7: delete unneeded ptrace.hStefan Reinauer
... and delete traces in source files. Change-Id: Ie0f70a479f1eadadc654a41fa3c426d1d4ac2f2b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2152 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-15libpayload: Style fixesStefan Reinauer
Change-Id: Ic3164fbffd8da6bd9d506d80e425ad89efc0f1af Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2144 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-01-14Support for Celeron 1007UStefan Reinauer
Change-Id: I6b96b0e387dc3e6985eb1476fea612772a2288bc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2145 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-01-14Make the pre-commit-hook happy about the code in libgcov.cRonald G. Minnich
Make the comments match what pre-commit-hook wants. Change-Id: Ib99a6583f97221df3638bd3b7723f51d5f9c223c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2143 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-12Implement GCC code coverage analysisStefan Reinauer
In order to provide some insight on what code is executed during coreboot's run time and how well our test scenarios work, this adds code coverage support to coreboot's ram stage. This should be easily adaptable for payloads, and maybe even romstage. See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for more information. To instrument coreboot, select CONFIG_COVERAGE ("Code coverage support") in Kconfig, and recompile coreboot. coreboot will then store its code coverage information into CBMEM, if possible. Then, run "cbmem -CV" as root on the target system running the instrumented coreboot binary. This will create a whole bunch of .gcda files that contain coverage information. Tar them up, copy them to your build system machine, and untar them. Then you can use your favorite coverage utility (gcov, lcov, ...) to visualize code coverage. For a sneak peak of what will expect you, please take a look at http://www.coreboot.org/~stepan/coreboot-coverage/ Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2052 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-12No random directoriesStefan Reinauer
Please, don't just add random directories for a single file because it seems convenient. There already is a chromeos directory, that should be used. Change-Id: I625292cac4cbffe31ff3e3d952b11cd82e4b151e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2137 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-12Move init.S to a proper filenameRonald G. Minnich
Also, remove unnecessary junk and prepare for future build changes. Change-Id: I143777ec7e67ea4d6fed00084aafcb94c7866b4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2141 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-01-11Fix console.c with serial support disabledStefan Reinauer
During the ARM port, disabling serial console became broken. This patch fixes it. Change-Id: I40460596073918a08c19bb9c991cada341cca940 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2136 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11cbmem: replace pointer type by uint64_tStefan Reinauer
Since coreboot is compiled into 32bit code, and userspace might be 32 or 64bit, putting a pointer into the coreboot table is not viable. Instead, use a uint64_t, which is always big enough for a pointer, even if we decide to move to a 64bit coreboot at some point. Change-Id: Ic974cdcbc9b95126dd1e07125f3e9dce104545f5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2135 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11armv7: Add temporary build script for CrOS devsDavid Hendricks
This build script will: - Build coreboot.rom - Download BL1, extract and place it if necessary - Do a partial flash via Servo, using some flashrom trickery to make the process fast. This probably should not be submitted, unless the intention is to back it out eventually. Credit goes to Hung-Te for writing the original version. Change-Id: Ia7a4bea6077416fc06768a5de5ee07edc973ede2 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2134 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11exynos5250: Hacked up lowlevel_init_cDavid Hendricks
This is the first lowlevel init routine that gets called in romstage. It's fugly and needs a lot of clean-up, but does the job for now. Change-Id: Id54bf4f1c3753bcbed5f6b5eeb4b48bc3b41ce93 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2133 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-11exynos5250: Temporarily remove intermediate rule in MakefileDavid Hendricks
This cannot be used until we get the BL1 mess sorted out. Change-Id: I2490addb31256e27caa89ebb5b1501296e6903bd Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2132 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-11AMD: Set the mask of MTRR according to CONFIG_CPU_ADDR_BITSZheng Bao
The high bits of mtrr mask are MBZ (Must be zero). Writing 1 to these bits will cause exception. So be carefull when spread this change. The supermicro/h8scm needs more work. Currently it is set as it was. We need to check if the F10 and F15 have different value. Change-Id: I2dd8bf07ecee2fe4d1721cec6b21623556e68947 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1661 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-01-10armv7: replace magic constant for romstage locationDavid Hendricks
This replaces 0x02023400 with an SoC-specific Kconfig variable. Change-Id: I21482d54a1e1fa6c4437c030ddae2b0bb3331551 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2130 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10add a few entries to .gitignoreDavid Hendricks
- Development friendly files (tags, clang_complete) - Cross-compile stuff (xgcc, tarballs) This patch was originally written by Stefan. Change-Id: I4229414c94ee04a4f38a748369c4ac90fda57aea Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/2128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-10armv7: add *(.data) back into .romdata sectionDavid Hendricks
This doesn't seem to be strictly required (so far), but makes sense. Change-Id: I18416c427ff886507ae09c7fc1a018baf94af24a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2131 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10armv7: update board_init_f function signatureDavid Hendricks
We don't pass arguments when we jump out of assembly code. Change-Id: Iccf3a6f713e260b08f9ff47e8b542b9e96369166 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2122 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10armv7: dynamically calculate the branch offset in cbfstoolDavid Hendricks
This tidies up the ARMV7 case when creating cbfs: - Calculate the offset using the size of the master header and offsets rather than using a magic constant. - Re-order some assignments so things happen in a logical order. Change-Id: Id9cdbc3389c8bb504fa99436c9771936cc4c1c23 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2125 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10armv7: delete some unused filesDavid Hendricks
Change-Id: I4601b97cbd7dbfb6ee742b3920d2aac4ac49b958 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2121 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2013-01-10snow: add max77686 driver in romstage and ramstageDavid Hendricks
Change-Id: Id3e20b1ab5d85cfd22e2dae2750f32007b7f8f74 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2123 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10exynos5250: clean-ups for clock_initDavid Hendricks
This does some clean-up for the exynos5250 clock_init.c: - No global data. - Remove some unused #includes - Hard-code the memory type for Elpida DRAM. This will need to be fixed eventually (or the system will be unstable), but is good enough for early bring-up and until we finish other re-factoring. Change-Id: Icd2cf8ba35058cbd1131666db311dfb77ef1a160 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2127 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10exynos5250: un-comment a lot of code which was left out earlierDavid Hendricks
Turns out initializing power rails is necessary, even for getting serial output. Change-Id: I3042c1001ae43b1e793ee6cb90bb79b8db0f8fd1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2126 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10size optimizations for max77686David Hendricks
This contains some size optimizations for the Maxim MAX77686 driver: - change max77686_para.vol_{min,div} from u32 to u16 (currently their max value is 50000 so it should be fine) - remove max77686_para.regnum which takes 4 bytes for each and is not used (Patch was originally written by Hung-Te Lin, I'm just uploading it) Change-Id: I24044427c49467e99380d1f60ebc59e69c285b22 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2124 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-10Fix 2 infinite loops if IMC doesn't respondMartin Roth
ACPI code: The ACPI code is not currently being compiled in by default, but assuming that it will be at some point, I'm fixing the loop that waits for the IMC to respond after sending it a command. The loop now exits after 500ms, similar to the function in agesa. Agesa Code: a 16 bit variable will always be less than 100000. Change to be a 32 bit variable. Change-Id: I9430ef900a22d056871b744f3b1511abdfea516e Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2119 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-09Fix typo in SB800 Kconfig for IMC positionMartin Roth
The cimx/sb800 IMC Firmware location Kconfig option has a typo which would could set it to the wrong location. Change-Id: I38016bebd1bfe6ad6d3f1c02cb1960712fbf4ab2 Signed-off-by: Martin Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/2120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-01-08qemu-x86: Implement more featuresStefan Reinauer
This patch switches the Qemu target to use (pseudo) Cache As RAM and enables some ACPI code. This allows to use the CBMEM console and timestamp code with coreboot in Qemu. Right now, the ACPI code is commented out because leaving it in breaks IDE. Change-Id: Ie20f3ecc194004f354ae3437b9cf9175382cadf8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2113 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-08cbmem utility: Find actual CBMEM areaStefan Reinauer
... without the need for a coreboot table entry for each of them. Change-Id: I2917710fb9d00c4533d81331a362bf0c40a30353 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2117 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-08cbmem utility: unify debug outputStefan Reinauer
... and indent it to make output more comprehensible. Change-Id: If321f3233b31be14b2723175b781e5dd60dd72b6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2116 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-08cbfstool: index is replaced by strchr.zbao
From index(3): CONFORMING TO 4.3BSD; marked as LEGACY in POSIX.1-2001. POSIX.1-2008 removes the specifications of index() and rindex(), recommending strchr(3) and strrchr(3) instead. Change-Id: I3899b9ca9196dbbf2d147a38dacd7e742a3873fe Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2112 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-08cbmem utility: Add option to dump cbmem consoleStefan Reinauer
This adds an option to the cbmem utility to dump the cbmem console. To keep the utility backwards compatible, specifying -c disables printing of time stamps. To print both console and time stamps, run the utility with -ct Change-Id: Idd2dbf32c3c44f857c2f41e6c817c5ab13155d6f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2114 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2013-01-08cbmem utility: drop obsolete python based implementationStefan Reinauer
The first version of the cbmem utility was written in python, but it had issues with 64bit systems and other little hick ups. Since the C version has much fewer dependencies (no python needed on target system), and it works in all corner cases, drop the python version. Change-Id: Ida3d6c9bb46f6d826f45538e4ceaa4fc1e771ff5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2115 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: build bot (Jenkins)
2013-01-05ARMv7: drop __ASSEMBLY__Stefan Reinauer
We moved to using __ASSEMBLER__ years ago since it is set by as. Change-Id: I60103ba23ebe87be1d0bc63beed0ef5b05eed4f2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2111 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-05Update 3rdparty mark to latest repositoryStefan Reinauer
Change-Id: I59fca4427345c7e677138b944613a1554d5a8331 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2110 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-01-05ARMv7: drop __KERNEL__Stefan Reinauer
It's a bad Linux heritage.. We have no userland in firmware. Change-Id: Ib19e5ba713078ca37514571213d19f418417b964 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2108 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:22:49 +0000