summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-15vendorcode/amd/pi/00670F00/Lib: Remove read modify write functionsRichard Spiegel
Now that the functions that used them were safely removed, remove LibAmdIoRMW(), LibAmdMemRMW() and LibAmdPciRMW(). BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: I570bd91cd9eba7798ea39d9685e214fee10824be Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00: Remove functions that use LibAmdPciRMW()Richard Spiegel
The functions that use LibAmdPciRMW() are not used by coreboot and can be safely removed in preparation to remove LibAmdPciRMW() itself. The functions to be removed are: From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c: ProgramPciByteTable(). From vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchLib.c: RwXhciIndReg(), RwXhci0IndReg() and RwXhci1IndReg(). From vendorcode/amd/pi/00670F00/Proc/Fch/Common/PciLib.c: RwPci(). BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: I0b96d3d6b98140ed8e9298817dbe29d55b9e22cb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15vendorcode/amd/pi/00670F00: Remove functions that use LibAmdMemRMW()Richard Spiegel
The functions that use LibAmdMemRMW() are not used by coreboot and can be safely removed in preparation to remove LibAmdMemRMW() itself. The functions to be removed are: ProgramFchAcpiMmioTbl() and GetEfuseStatus(), both from vendorcode/amd/pi/00670F00/Proc/Fch/Common/FchPeLib.c. BUG=b:112541697 TEST=Build grunt and gardenia Change-Id: Ib935b1797c4bf8b504fdda6f676fca369169a7f1 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15google/grunt: Remove BayHub EMMC driving strength overrideKevin Chiu
Side effect was observed that after override BayHub EMMC driving strength to the max, EMMC CLK will be reduced to 51.x Mhz from 200 Mhz. This will cause OS installation fail on Samsung EMMC sku. BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I848ab0cae474b15fbc4264c8ade63d5c6b4e489d Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
This file contains two instances of "dptf_enable" = "1". This change removes the 2nd instance (it doesn't have an explicit comment like the 1st instance). The dptf devices still seem to be present even with this change, as expected. Change-Id: I890006644be9176ebaf555cc121c816e12f2b596 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
The spec of the sx9310 says the I2C interface can handle standard (100kb/s) and fast mode (400kb/s). The current setting is using fast plus (1000kb/s) so this change is reducing the speed to fast mode. I've been using the sensors with this change for a few weeks now, though I also don't recall seeing an issue prior to this change. Change-Id: I337fc02c52565d6ec4d7bac1b3564f65238962dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15Revert "mb/google/poppy/variants/atlas: enable camera power and release reset"Caveh Jalali
This reverts commit 1fdb76945a9d06bbff37dee9da69e13a86c933f4. Camera power is now handled by ACPI rules - no need to force the GPIOs on by default. BUG=b:80106316,b:111141128 Change-Id: Ifefec320884989f106a4b09c956d3a3279a1491a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28072 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ping-chung Chen <ping-chung.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Add DISPLAY_DCR_EN GPIO pinCaveh Jalali
This defines new GPIO pin for controlling the display panel CABC function. The default value is high (enabled). BUG=b:112154569 Change-Id: I29083ab18e37f929a55b450b143463c67fe0abea Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Update DPTF sensor namesCaveh Jalali
This updates the DPTF sensor names to reflect the sensor locations on the board. BUG=b:75454415 TEST=verified new strings show up in /sys/devices/LNXSYSTM:00/LNXSYBUS:00/INT3400:00/*/description Change-Id: Ibffe6cb361de212ca03e75deaa8c454546d267a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28069 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14src: Remove duplicated 'include <device/device.h>'Elyes HAOUAS
Change-Id: Ia38c6f8d978065090564d449cae11d54ddb96421 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14lib/lzmadecode.c: : Avoid static analysis error for unused valueRichard Spiegel
Within procedure LzmaDecode(), the variable len can be assigned a value that is never read after, thus causing a static analysis error. Tell the coreboot scan-build static analysis we know it can happen. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I37bc3ff19ca85f819ba1cbb2a281c1ad55619da9 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-14soc/amd/stoneyridge: Add bootblock_fch_initRaul E Rangel
Add a method in bootblock that can be used for printing registers. BUG=none TEST=compiled grunt Change-Id: I8dff30e589761fbad92cfc2709546dba169993d8 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28059 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14drivers/i2c/tpm/cr50.c: Check if TPM was readRichard Spiegel
Under some conditions, cr50_i2c_read() can return without actually reading the TPM, which will leave access uninitialized. Set an initial value for access, and if TPM fails to respond in time check if at least TPM was read. This way avoids printing an uninitialized value. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I5ec7a99396db32971dc8485b77158d735ab1d788 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-14docker/coreboot.org-status: provide html/head/body framePatrick Georgi
This allows us to add encoding information. Change-Id: Ic9a12a13f11fd22eeec96fbcca6b706312876b07 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/27874 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14sb/intel/{bd82x6x,ibexpeak}: Don't build with FAKE_IFD by defaultAngel Pons
FAKE_IFD depends on out tree flashrom patches for which there are better alternatives available now, so don't build with FAKE_IFD by default. Change-Id: I2c6a6586da9a6d26b0a5bf7d3ba8f3ffe3205647 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-14ifdtool: port the feature to set AltMeDisable/HAP bit hereBill XIE
Port the newest feature of me_cleaner to ifdtool (https://github.com/corna/me_cleaner/ , Discussed in https://github.com/corna/me_cleaner/issues/53 ) to set AltMeDisable (or HAP for skylake/ME11) bit to the IFD to disable ME. In this commit I use (ifd_version >= IFD_VERSION_2) to judge whether HAP instead AltMeDisable should be set, since this condition is only fulfilled on skylake or newer platforms. This feature needs to guess ich revision, which needs guess_ich_chipset() from flashrom to be ported here. Routines to dump those bits are also added. Change-Id: I9a2ecc60cfbb9ee9d96f15be3d53226cb428729a Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-14sb/intel/i82801[ij]x: use (more) RCBA register names instead of magic numbersStefan Tauner
Change-Id: I909d7dd4968aa2f76df00c03e603e8e82a4824c0 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-14cbmem: rename vdat to chromeos_acpiJoel Kitching
There is a confusingly named section in cbmem called vdat. This section holds a data structure called chromeos_acpi_t, which exposes some system information to the Chrome OS userland utility crossystem. Within the chromeos_acpi_t structure, there is a member called vdat. This (currently) holds a VbSharedDataHeader. Rename the outer vdat to chromeos_acpi to make its purpose clear, and prevent the bizarreness of being able to access vdat->vdat. Additionally, disallow external references to the chromeos_acpi data structure in gnvs.c. BUG=b:112288216 TEST=emerge-eve coreboot, run on eve CQ-DEPEND=CL:1164722 Change-Id: Ia74e58cde21678f24b0bb6c1ca15048677116b2e Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/27888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
This patch updates Power Limit (PL) for AML. - PL1 as 5W TDP as POR - PL2 as 18W TDP as POR BUG=None BRANCH=None TEST=Build coreboot for Nocturne board and check default PL1/PL2 TDP. cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_0_power 5000000 (5W TDP) cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_1_power 18000000 (18W TDP) Change-Id: Icb02a8a7c5fcd5e6aee45f14eba540a6b3ed3d67 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/27427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-14mb/google/poppy/variant/nami: Add TSR2 on DPTFT.H. Lin
Add TSR2 DART/DTRT package BUG=b:110451144 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test image with dptf.dv Change-Id: I3328e17328415f5ebdcf84263e5456e11e55f769 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
This change updates GPIO configuration for bobba boards with id >= 1 This follows the same model as fleex: a. Dynamically update touchscreen power enable GPIO in devicetree. b. Provide default and bid0 tables for GPIO configuration in ramstage. c. Configure WLAN enable GPIO differently in bootblock based on boardid. BUG=b:112354568 TEST=Built firmware for bobba Change-Id: Id4ee4a1815e16ddfe60ed268688a8aaf4fb75579 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/28071 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14mb/intel/coffeelake: Enable 32MB rom compilation for Coffeelake UMaulik V Vaghela
Coffeelake U has 32MB flash chip support. Adding fmd file and enabling CFL U board's Kconfig to output 32MB rom file. Change-Id: I21431b7ac813781b12b95f80c6f8960a78caf4bc Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-08-14mb/intel/coffeelake_rvp: Add support for new board coffeelake RVPMaulik V Vaghela
Add support for new board coffeelake RVP. This patch is a copy patch and copies entire coffeelake_rvp folder from cannonlake_rvp. Changes done on top of copy: 1. Change copyright year from 2017 to 2018 2. Rename Cannonlake to Coffelake whenever applicable 3. Update entries in Kconfig and Kconfig.name 4. Rename variant directories to match coffeelake boards Change-Id: Id37bfeb0ae51fd630fec96273216dbb2900782c7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27904 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14util/autoport: Adapt logmaker for newer ACPI versionsArthur Heymans
acpidump now creates dumps with 4 spaces instead of 2 in front of the hex dump, so be a bit smarter about the input with regexp. Tested with X220 autoport logs: Still creates the same coreboot code. Change-Id: I8d48c09cdff9432f394b350540ea9765fc942781 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-14xgcc: fix grouping of conditions in buildgcc for AdaStefan Tauner
No idea where the escaped parentheses come from but they are no good. Without this patch I see errors with bash and dash: ./buildgcc: line 1198: (: command not found ./buildgcc: line 1199: (: command not found The patch uses curly brackets for grouping since they don't launch a subshell - unlike using unescaped parentheses which would work too. shellcheck is happy with either variant (and the original one(!)). Change-Id: I44fbc659f5b54515e43e85680b1ab0a824b781a7 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-13util/lint: Set "acknowledgement" correctElyes HAOUAS
"acknowledgement" is not commonly used but correct. Change-Id: I0aa469d77904d65288f5b7133bec10be3688a596 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13driver/spi/stmicro: add 3.3V variant of N25Q032Stefan Tauner
Unfortunately stmicro.c does not distinguish the 1.8V version from the 3.3V versions (yet) although they have distinct RDIDs. I have at least ordered the ID macros accordingly and used a proper name in this patch. Change-Id: Id4fd8d46dcc9e51c1ae5504a32c2f8c5cfd863a1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13Documentation/gfx: explain port mapping in libgfxinit's configStefan Tauner
Change-Id: Id24ded4ba641aade66468313e33ede1a82090f05 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb/google/kahlee: Remove unneeded blank linePaul Menzel
Change-Id: I189c981f3334836ab24bbc74491e9b58a2d403a4 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/27921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb/intel/cannonlake_rvp/Kconfig: Don't redefine firmware pathsArthur Heymans
The paths defined in southbridge/intel/common/firmware/Kconfig should work just fine. Change-Id: Iaa780d9b3080416c6b1a7f24d97ecb8214962405 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28012 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/intel/broadwell/Kconfig: Clean up redefined config optionsArthur Heymans
All broadwell board set HAVE_IFD_BIN to default n, overloading the option in soc, therefore just use the defaults in sb/intel/common/firmware. Change-Id: I250dbbc9d61ecedc1a1eb48751ad966732604349 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28011 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13soc/intel/braswell/Kconfig: Clean up redefined config optionsArthur Heymans
There is no need to redefine option present in southbridge/intel/common/firmware/Kconfig. FAKE_IFD depends on out tree flashrom patches for which there are better alternatives available now, so don't build with FAKE_IFD by default. Change-Id: Icd41137a1bbfe519c89a71cc0c7c3755558bd834 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13sb/intel/lynxpoint: Don't build with FAKE_IFD by defaultArthur Heymans
FAKE_IFD depends on out tree flashrom patches for which there are better alternatives available now, so don't build with FAKE_IFD by default. Change-Id: I21bc5bdc8b733fbfdb1b2a4fbcb572c76701074a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28009 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/rambi: Don't set defaults for HAVE_IFD_BINArthur Heymans
There is no need set the default HAVE_IFD_BIN explicitly to n. Change-Id: I4a5fe45e7f8f6dd018937861b0fb92a8da49904e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28008 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13sb/intel/lynxpoint/Kconfig: Clean up redefined config optionsArthur Heymans
There is no need to redefine option present in southbridge/intel/common/firmware/Kconfig. Change-Id: I9999440031b07006e2df11e00dfb9f3dbe04f832 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28007 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13fsp_broadwell_de: Increase CONFIG_MAX_CPUS to 32Samuel Jimenez
Fix to accomodate for boards with more than 16 cores. Change-Id: I35b61d94491c21ef76717f761e566ca815880f27 Signed-off-by: Samuel Jimenez <aerojsam@gmail.com> Reviewed-on: https://review.coreboot.org/27847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13superio/winbond/w83627hf: Remove unused valueElyes HAOUAS
Change-Id: I90d1997254f6766f4c61ff55449109adbdd783e3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13src: Get rid of non-local header treated as localElyes HAOUAS
Change-Id: I2c5edadfd035c9af08af9ee326a5a2dc8b840faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13Documentation/Makefile.sphinx: Be cautious when running `rm -rf`Tristan Corrick
If BUILDDIR were an empty string, running `make clean` would result in running `rm -rf /*`. Omitting the trailing /* prevents this. With a valid BUILDDIR, the behaviour of `make clean` changes slightly in that BUILDDIR itself is removed. However, this is probably more in line with what one would expect from `make clean`. Change-Id: I51b52bb6e7fe73a07fed6291a4f1cc253f2bf319 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27775 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13src/mb: Remove some unneeded includesElyes HAOUAS
Change-Id: I3108193c0e0b644cecb74ae0c7a7b54e24a75b58 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb: Get rid of unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I80dd65484fd52e9048635091fb20a123e959e999 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27869 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13cpu/intel/car: Align the stack to 16 bytes before romstage_mainArthur Heymans
Change-Id: I1415c18779bc481fdec5f72f83c06a58ce6d5c39 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26797 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13google/bobba: Add Raydium touch screen supportPan Sheng-Liang
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=none BRANCH=master TEST=emerge-octopus coreboot Change-Id: Ic61a69e19e97520da0702dfe6cb7496563fc34f4 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13util/lint: update checkpatch.pl to latest linux versionMartin Roth
Taken from Linux upstream commit ffe075132af8b7967089c361e506d4fa747efd14 Change-Id: I43d09a912fafe896c045df080c0f75fe6d908087 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28046 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13nb/intel/haswell: Always locate mrc.bin in the COREBOOT fmap regionArthur Heymans
This binary needs to be at a specific offset and will therefore always be located in the COREBOOT fmap region. This is needed when VBOOT_SEPARATE_VERSTAGE is selected. Change-Id: Ia73d468ab23932f92331ef40b8e8066cef55af2c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-13util/lint: Update spelling.txt to latest linux versionMartin Roth
Comment out 'sepc' and add a comment about it at the top so that it doesn't get added back in accidentally in a future update. Change-Id: Iaa909d97d0d97d7bf0799e48fc237a9673d549aa Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mb/intel/dg43gt: Enable the GBEArthur Heymans
This was blindly copied from logs created under vendor BIOS in non-descriptor mode which apparently set LAND in BUC. Change-Id: I94c917600421ee742ece7f6f71309da80261da28 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-13arm64: mmu: Spot check security state for TTB mappingJulius Werner
Since commit 372d0ff1d1 (arch/arm64: mmu: Spot check TTB memory attributes), we already check the memory attributes that the TTB region is mapped with to avoid configuration mistakes that cause weird issues (because the MMU walks the page tables with different memory attributes than they were written with). Unfortunately, we only checked cachability, but the security state attribute is just as important for this (because it is part of the cache tag, meaning that a cache entry created by accessing the non-secure mapping won't be used when trying to read the same address through a secure mapping... and since AArch64 page table walks are cache snooping and we rely on that behavior, this can lead to the MMU not seeing the new page table entries we just wrote). This patch adds the check for security state and cleans up that code a little. Change-Id: I70cda4f76f201b03d69a9ece063a3830b15ac04b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13cpu/x86/smm/smm_module_loader.c: Avoid static analysis error "unused value"Richard Spiegel
In procedure smm_load_module, variables fxsave_size and fxsave_area are set to 0 and NULL, but if CONFIG_SSE is enabled, they are overwritten. Change the code setting the value to an "else" of the "if" testing CONFIG_SSE, thus avoiding static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I3042b037017a082378b53ee419c769c535632038 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13soc/intel/skylake: use unique _uidMatt Delco
There's two cases of 1 being used. This changes the eighth instance to use 8. Change-Id: I7057a4345dadcc6f8fb43093844d27007444f481 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13ec/google/chromeec: de-dup a _UIDMatt Delco
There's two instances od _UID 1 for PNP0C02. This change moves the more system-specific instance of the two to a higher number. I believe these are the 4 I'm seeing. soc/intel/skylake/acpi/systemagent.asl Device (PDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) soc/intel/skylake/acpi/lpc.asl Device (LDRC) Name (_HID, EISAID ("PNP0C02")) Name (_UID, 2) ec/google/chromeec/acpi/superio.asl Device (ECMM) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 1) ec/google/chromeec/acpi/superio.asl Device (ECUI) { Name (_HID, EISAID ("PNP0C02")) Name (_UID, 3) Change-Id: I2b0f1064726a1fa3940ccfb2a4627c79a26684e4 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13.checkpatch.conf: Ignore a few more warningsMartin Roth
- PRINTK_WITHOUT_KERN_LEVEL is a new warning that coreboot's printks don't follow. - UNDOCUMENTED_DT_STRING is ignored because we don't have any documentation for .dt files. - SPDX_LICENSE_TAG is another new warning. We can evaluate adding the spdx license tags to our files, but at this point they aren't there, so disable it for now. Change-Id: I4b7fcfc0339b358a48e77188d85b47c022c7eb49 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-13mediatek: Map SRAM as secure and cached memoryTristan Shieh
This patch changes the mapping of SRAM from non-secure to secure. Without this patch, mmu_config_range() can not work when MMU is enabled. The new config is still in non-secure cache since TTB section is allocated in SRAM which is mapped as non-secure. BUG=b:80501386 TEST=Boots correctly on Kukui and Elm Change-Id: Ia5b8716cfcca64d1d716a177225ea2f7ac2920a6 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-13mb/google/poppy/variants/nocturne: remove icc_max overridesNick Vaccaro
Remove icc_max overrides to allow SoC code to set proper icc_max based on CPU SKU. BUG=b:78122599 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash to nocturne, boot to kernel and verify device doesn't hang after a few minutes. Change-Id: I37c44e2428b802d754f2b12b8a57601d257e6582 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27996 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/nocturne: update PL2 based on CPU skuNick Vaccaro
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-nocturne coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: Idfdc0c2434fdef56a7c25df05e640837a5096973 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27997 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/atlas: Update PL2 based on CPU skuGaggery Tsai
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: I468befcd2c4ad6c2bb9ae91b323a43f87ff65a26 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27765 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13intel/apollolake: Fix typo in dptf.aslChris Zhou
Fix define typo in dptf.asl BUG=none TEST=emerge-octopus coreboot PASS Change-Id: I1c3bd55d1507e6fffe638bba38c99a9851b8a96a Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
Follow thermal table (b:112274477 comment#1) for first tunning. BUG=b:112274477 TEST=Match the result from DPTF UI. Change-Id: I63b2e50a4f6fc5453e6564e277600498ac0e6244 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13utils: spkmodem: suggest to use parec instead of parecordDenis 'GNUtoo' Carikli
Using recent versions of parecord produces the following: Failed to open audio file. According to the manual: -r | --record Capture audio data and write it to the specified file or to STDOUT if none is specified. If the tool is called under the name parec this is the default. so we suggest parec instead. Change-Id: I8b821df67b10e9d6533c4cbe19c646c84d436c27 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/23863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
2018-08-13utils: spkmodem: Add Makefile and gitignoreDenis 'GNUtoo' Carikli
Change-Id: Ie3a6a777f5b667e881a4462bdd44a34dbace5520 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/23862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-13mediatek/mt8183: Add DRAM resource in ramstageTristan Shieh
Add DRAM resource in ramstage to load payload. BUG=b:80501386 TEST=Load bl31 and depthcharge correctly on Kukui with more patches applied. Change-Id: Ie793b403bbbdb3c231dfa2caef29dcbb596b1a61 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27971 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13security/vboot/Makefile: Use shell cat instead of make file commandRaul E Rangel
The make `file` command is apparently a v4.2 feature only. Replace it with a shell cat. BUG=none TEST=verified fwid.region was created correctly Change-Id: I5e32a521ad3e6759853f0cde2e4c4db6e564d3be Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-13soc/broadcom/cygnus: Increase romstage SRAM size in memlayoutPhilipp Deppenwiese
* Needed for additional code in later patches. * SOC is obsolete anyway. Change-Id: I5bbdf19cc886103e9e7a6b75219d6881cfe9c757 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23764 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/octopus: Enable SAR config for Intel 9560 moduleJohn Zhao
Enable the GEO SAR feature for Octopus. Program wifi_sar VPD key. coreboot reads the VPD and creates the ACPI table as per the WGDS spec. BUG=b:112288077 TEST=Program VPD key, extract acpi table ssdt and valiate WGDS entry. Change-Id: I40a6fd9e0ec8b440996bf3389322fd89bcca15a4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Do not configure IOStandby for WLAN_PE_RSTFurquan Shaikh
PERST signal is asserted/deasserted by ACPI routines during suspend/resume. Configuring IOStandby for WLAN_PE_RST can result in failure to resume from suspend state with wake-over-WLAN. This change removes the IOStandby configuration for WLAN_PE_RST. BUG=b:112371978 Change-Id: Ic7c0b2aa144233f8bbb4e5169d96347a1290abe1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Configure WiFi wake as NC when using CNViFurquan Shaikh
When CNVi is being used, external wake using GPIO_119 is not required. This change configures GPIO_119 as PAD_NC if CNVi is taken out of reset. BUG=b:112371978 Change-Id: Ifee90f428ed43c4d7c612c170476aff43b4a33ce Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12soc/intel/apollolake: Get rid of cnvi.aslFurquan Shaikh
There is no need to add a special cnvi.asl file for the CNVi device. This can be handled by drivers/intel/wifi just like a PCIe WiFi device. This change gets rid of the cnvi.asl file and its usage in southbridge.asl file. BUG=b:112371978 Change-Id: I0b798cdd430768730b7ada61ca4cb1f63c2a4229 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12mb/google/octopus: Use correct chip for CNVi deviceFurquan Shaikh
This change uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows up in ACPI node 2. It is possible to pass any parameters from devicetree to wifi driver for SSDT generation. BUG=b:112371978 Change-Id: Ia49820dd4f9cf2e0a9ef14931fbddd8a723208c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-12drivers/intel/wifi: Get rid of unused wrdd.aslFurquan Shaikh
This change gets rid of unused wrdd.asl in intel wifi driver. This file became redundant when all boards moved to using SSDT for wifi device. Change-Id: I8b5b3816d77c90e75052c58a3120ab62185873a7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27963 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12drivers/intel/wifi: Skip adding SSDT entry if device is disabledFurquan Shaikh
This change checks to ensure that device is enabled before adding entry into SSDT. BUG=b:112371978 Change-Id: Ibe4811bef8cf0978b7a82d66a32f96247b9c823d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-12mb/google/octopus: Dynamically disable CNVi/PCIe deviceFurquan Shaikh
This change checks to see if CNVi module is out of reset: 1. If yes, then PCIe device for WiFi is disabled. 2. If no, then CNVi device is disabled. BUG=b:112371978 Change-Id: I6e6cf2e646c897df017913056db87ac0cffa1a8e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-08-12soc/intel/apollolake: Add CNVi device to list of PCI devsFurquan Shaikh
This change adds CNVi device to list of PCI devs. BUG=b:112371978 Change-Id: I6def98db3846c2244812a9a2ce84340bd2149b48 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-12mb/google/octopus: Disable unused I2C2 in devicetreeFurquan Shaikh
I2C2 is unused on all octopus variants. This change disables it in devicetree. BUG=b:112458032 Change-Id: I55abef864c06a448011f9570d3e6c0aa8bfdc5bc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28016 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
This change updates GPIO configuration for fleex boards with id >= 1 This follows the same model as phaser: a. Dynamically update touchscreen power enable GPIO in devicetree. b. Provide default and bid0 tables for GPIO configuration in ramstage. c. Configure WLAN enable GPIO differently in bootblock based on boardid. d. Disable unused I2C devices in devicetree. BUG=b:112458032 TEST=No errors observed on boot-up on fleex. Change-Id: Ib4c449168b08e2393e2395d6b49469be5599c2ce Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-12mb/asus/maximus_iv_gene-z: Add VBTTristan Corrick
The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 3603). Tested with Linux 4.9 and everything works as expected. Change-Id: I8e3b1d274ac0df63989d966f477013e780611fa1 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/28050 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-11util/lint: Remove register name identified as a misspelled wordXiang Wang
RISC-V has a register named 'sepc' but checkpatch identifies it as a misspelling of 'spec'. Remove it from the list. Change-Id: I7b092d6f04e28fba36095c607bc59346fb5c605d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-11drivers/pc80/tpm: add support for SLB9665 TPM2.0 moduleKamil Wcislo
SLB9665 are not initialized correctly. It looks like SLB9665 and SLB9660 return the same DEV ID. Initialize these devices according to TPM Kconfig selections. Tested on apu2 with following change: https://review.coreboot.org/#/c/coreboot/+/28000/ Change-Id: Ic20b9a65ef6a4ee392a9352f7c9bf01b2496f482 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/21983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-08-10soc/cavium/cn81xx: Fix minor thingsPatrick Rudolph
* Move cbmem.c to cn81xx folder * Store CBMEM below 4 GiB * Make sure CBMEM doesn't overlap with ATF scratchpad * Fix ATF scratchpad not marked as reserved due to wrong calculation * The scratchpad is the last 1 MiB at the end of DRAM. Tested on Cavium CN81xx EVB: The ATF scratchpad is now marked reserved and the configuration tables are located below 4 GiB. Linux still boots. Change-Id: Ibbc8b586f04bd6867c045f5546b32a77c057ac74 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27955 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10[HACK]cavium/cn81xx/soc: Don't advertise CAR area as usablePatrick Rudolph
It's broken. Change-Id: I3ec8fff99e21cbdf4ad3f4562ff9bbc1cd3c135b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10lib/fit: support booting initrd placed above 4GiBPatrick Rudolph
Store initrd offset as 64bit integer. Tested on Cavium CN81XX EVB: The initrd could be loaded when placed above 4GiB. Previously it failed to find the initrd. Change-Id: I5d1ae860ae4a4465546bc0ef89937d611d1e56ab Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10mb/google/octopus: add support for new shared memory configAaron Durbin
Allow for shared dram configuration by introducing a new table that collapses the common settings after removing the part numbers. When employing this scheme the part number comes from CBI. BUG=b:112203105 TEST=Placed part number in cbi. Faked out memory sku id. And enabled DRAM part num always in cbi. Everything checked out. Change-Id: I5229695ce3eb686421b89ac55d8df4b9fcec705c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-10src: Fix typoElyes HAOUAS
Change-Id: I689c5663ef59861f79b68220abd146144f7618de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-10src/drivers: Fix typoElyes HAOUAS
Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27916 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10mb/gigabyte/ga-{h61m-s2pv,b75m-d3h,b75m-d3v}: Clean up CMOS filesAngel Pons
Options that were deemed unneceesary on other code reviews have been removed from the layout files. In addition, the checksummed range has been extended to cover sata_mode and gfx_uma_size. Change-Id: Id9e904f447809231806a786e39ed638f21e1bc5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10mb/gigabyte/ga-{h61m-s2pv,b75m-d3h,b75m-d3v}: Clean up mainboard codeAngel Pons
I ported ga-h61m-s2pv based on the two Gigabyte b75m boards. Based on another mainboard's code review comments, this patch improves the code quality of these three similar boards. ga-h61m-s2pv is tested and confirmed to be working, but I cannot say the same regarding the other two mainboards as I do not have them. Change-Id: Ib7747cceb5ba56f791677204cdc4c54c129c70c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-08-10fit: Handle decompression errors properlyPatrick Rudolph
Set payload to NULL in case of decompression errors. Fixes the attempt to boot a kernel that couldn't be decompressed. Change-Id: I3a602b0e90923a0b5a3683c4a0adf9e4733d5a2a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10linuxboot: remove curley brace expansion from u-root commandsDavid Hendricks
Curley brace expansion is a bash-ism, so we can't use it for the u-root command list. This unfortunately also breaks the current Kconfig option since the list needs to be separated by space instead of commas. Change-Id: I429a52c1673e29b7180ee6f53deaa7a551a1a9b3 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/27967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-10src/soc/intel: Add new device IDs to support coffeelakeMaulik
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h 2. Add entry to identify CFL U GT and CPU to respective files 3. Add entry to identify CFL U to report_platform.c BUG=none BRANCH=none TEST=Boot to CFL U RVP board with this patch and check if coreboot is able to enumerate various devices and display correct component names properly in serial logs. Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed Signed-off-by: Maulik <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-10arm64: Turn architectural register accessors into inline functionsJulius Werner
Accesses to architectural registers should be really fast -- they're just registers, after all. In fact, the arm64 architecture uses them for some timing-senstive uses like the architectural timer. A read should be: one instruction, no data dependencies, done. However, our current coreboot framework wraps each of these accesses into a separate function. Suddenly you have to spill registers on a stack, make a function call, move your stack pointer, etc. When running without MMU this adds a significant enough delay to cause timing problems when bitbanging a UART on SDM845. This patch replaces all those existing functions with static inline definitions in the header so they will get reduced to a single instruction as they should be. Also use some macros to condense the code a little since they're all so regular, which should make it easier to add more in the future. This patch also expands all the data types to uint64_t since that's what the actual assembly instruction accesses, even if the register itself only has 32 bits (the others will be ignored by the processor and set to 0 on read). Arm regularly expands registers as they add new bit fields to them with newer iterations of the architecture anyway, so this just prepares us for the inevitable. Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Drop checks for current exception level, hardcode EL3 assumptionJulius Werner
When we first created the arm64 port, we weren't quite sure whether coreboot would always run in EL3 on all platforms. The AArch64 A.R.M. technically considers this exception level optional, but in practice all SoCs seem to support it. We have since accumulated a lot of code that already hardcodes an implicit or explicit assumption of executing in EL3 somewhere, so coreboot wouldn't work on a system that tries to enter it in EL1/2 right now anyway. However, some of our low level support libraries (in particular those for accessing architectural registers) still have provisions for running at different exception levels built-in, and often use switch statements over the current exception level to decide which register to access. This includes an unnecessarily large amount of code for what should be single-instruction operations and precludes further optimization via inlining. This patch removes any remaining code that dynamically depends on the current exception level and makes the assumption that coreboot executes at EL3 official. If this ever needs to change for a future platform, it would probably be cleaner to set the expected exception level in a Kconfig rather than always probing it at runtime. Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Remove set_cntfrq() functionJulius Werner
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of others that are all accessed through the raw_(read|write)_${register}() family of functions. There's no reason why this register in particular should have an inconsistent accessor, so replace all instances of set_cntfrq() with raw_write_cntfrq_el0() and get rid of it. Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10marvell: Remove 'mvmap2315' SoCJulius Werner
I'm pretty sure this SoC doesn't actually exist. Change-Id: I53e268ee1795e524a2a4562d67a2b9f28af966d1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27965 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-10google: Remove board 'rotor'Julius Werner
Rotor is dead, long live [PROJECT NAME REDACTED]! Change-Id: Ia9308944257255e077a44c1df262c7f49c69890c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27964 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/octopus: add support for fetching DRAM part number from CBIAaron Durbin
Add 3 new Kconfig options: DRAM_PART_NUM_IN_CBI DRAM_PART_NUM_ALWAYS_IN_CBI DRAM_PART_IN_CBI_BOARD_ID_MIN These control whether to 1. attempt to use CBI at all 2. always use cbi and 3. conditionally use cbi based on board id. The intent is that the MIN variant would be used for the tranisition period then cut over to ALWAYS after full transition. Since multiple OEMs have different schedules these options are there to bridge the gap. yorp. bip, and octopus build targets would never flip DRAM_PART_NUM_IN_CBI, but in case someone does the MIN values are 255 to always take the old path. BUG=b:112203105 TEST=Set correct part number on phaser during testing. Change-Id: If9a0102806d78e89330b42aa6947d503a8a2deac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-09arch/x86/tables.c: Avoid static analysis error for unused valueRichard Spiegel
Within procedure arch_write_tables, the pointer "rom_table_end" is updated every time a table is created. However, after creating last table, pointer rom_table_end is not used, though it is updated. Add a "(void)rom_table_end;" at the end to avoid the static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I8a34026795c7f0d1bb86c5f5c0469d40aa53994a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09cpu/x86/mp_init.c: Avoid static analysis error for unused valueRichard Spiegel
Within procedure save_bsp_msrs, the structure pointer "msr_entry" is updated every time procedure save_msr() is called. However, after the last call of save_msr(), "msr_entry" is not used, thus causing a static analysis error. Add a "(void)msr_entry;" at the end to avoid the static analysis error. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: If0fb336fbf49eec3da255fadbe38b3a38768d0cf Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/cpu: Fix typoElyes HAOUAS
Change-Id: I13dec72b2de2a525d45909e697c33fbdc31111cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/device: Fix typoElyes HAOUAS
Change-Id: I65e57b37db9649b30ca25b2150f21ebffee73105 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/ec/google/chromeec: Fix typoElyes HAOUAS
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>