aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-23coreboot_tables: pass the early_mmc_wake_hw status to payloadBora Guvendik
Pass the return value from early_mmc_wake_hw() to the payload so that payload can skip sending CMD0 and resetting the card in case of success or in case of a failure in firmware, payload can recover by sending CMD0 and resetting the card. BUG=b:78106689 TEST=Boot to OS Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23intel/common/block/scs: Add ability to send early CMD0, CMD1Bora Guvendik
In order to improve boot time with emmc, add ability to send CMD0 and CMD1 early in romstage. This way, by the time system boots to payload, we are ready to continue with emmc setup and we don't need to send CMD0 in payload again, and wait for card to reset and be ready. BUG=b:78106689 TESTS = Boot to OS Force early_mmc_wake_hw() to return error, recover in payload Force an error in payload, make sure system can recover/boot Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
There are indeed two temperature sensors hooked up to the EC, but they are indexed as 0 and 1, not 1 and 2. BUG=b:132999028 TEST=Boot hatch with hardened EC, observe no more index overflows Change-Id: Ia7f503bc1dc941635db52fce40f217bf34da6d2b Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-23util/romcc: Add extra null pointer checkJacob Garber
It is possible that 'lnode->val' is set to 0 on a previous iteration of the loop, so check that it is non-null here before dereferencing it. Change-Id: I9827dd5623eaf11240df605a8b50ff9e27a5fce0 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1129149 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23util/romcc: Fix memory leakJacob Garber
The 'new_type' function already allocates memory, so it is only necessary to clone the existing type if this function is not called. Change-Id: I47065204c5f4b6bab022bd7ccf19838c3ce1f86e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity Scan CID 1129106 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23util/romcc: Add null check for filenameJacob Garber
It is possible that 'filename' is still null in this if statement, so we add an extra check to prevent a null dereference in strcmp. Change-Id: Iaba95b63a4d552051e0c56445522de7274dfd0b3 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1395330 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23util/romcc: Add extra NULL checks for memberJacob Garber
In each of these cases it is possible that 'member' is NULL at the beginning, which will skip the earlier while loops entirely and cause a NULL dereference later on. Add extra error checks to prevent this. Change-Id: Ib5873c0830b71397ef661976d387fc6ce33c5cd1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1129147, 1129152, 1129153, 1129154 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23AGESA binaryPI: Sync STRUCT_NAME definitionsKyösti Mälkki
While not implemented, copying the definitions from later AGESA/AMD.h to older helps us avoid lots of preprocessor directives. Change-Id: I34edc1ca23e9c063c4286273c53249ff0a953798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31510 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23util/autoport: Mention i2c-i801 module in readme.mdEvgeny Zinoviev
SMBus adapter will not appear if i2c-i801 module is not loaded. Added it to the readme. Change-Id: I3de0e02f13178d78b8cc02a74a745ad66e929070 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-23soc/intel/fsp_baytrail/romstage: Remove variable set but not usedElyes HAOUAS
Change-Id: Ic04cb7c51862bea4d01f853ee2c88cc03c414e35 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32899 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/fsp_broadwell_de/romstage: Remove variable set but not usedElyes HAOUAS
Change-Id: I3e304b9b19978c4100ef3486088d809c2a7fe1d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32898 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/pineview/early_init.c: Remove variable set but not usedElyes HAOUAS
Change-Id: If9ca551794a52e47a3649b126c3f061a68c494e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32897 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/x4x/early_init.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I8d0ab8bdc506592ef1d731e557b2397481aed725 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32896 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23nb/intel/haswell: Remove variable set but not usedElyes HAOUAS
Change-Id: I4e7f74f67f03131fae205a93dae3d61eca9cc0c7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32895 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/denverton_ns: Remove variable set but not usedElyes HAOUAS
Change-Id: Ic04231525c1aaaf3afc8c11cddc409b1f5b46743 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23cpu/amd/quadcore: Remove variable set but not usedElyes HAOUAS
Change-Id: I73f35ea80976ab445c797c4800b1e2fd24d34fdf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32893 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23lib/bootblock: Sanitize CMOS after bootblock_*_early_init()Nico Huber
CMOS isn't used that early, but the chipset initialization may be required to access it. In one instance, Intel Apollo Lake, the sanitize_cmos() function seems to hang if called before bootblock_soc_early_init(). The missing step is fast_spi_early_init(). But even without, one might expect sanitize_cmos() to return eventually (it didn't within about 20min). Change-Id: I6e1a029e4be7e109be43a3dad944bd7e05ea1f02 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-05-23device_tree: Use be32dec/be32enc where appropriateJulius Werner
This patch rewrites some of the device tree code to use the new be32dec/be32enc helpers where they can make the code cleaner. Change-Id: I437bbd6645a556ae9a0cfe6ea14638098e4c3606 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32860 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23fit: Add "board-skuX" (without -rev) to allowed compatible stringsJulius Werner
In some cases we may have boards that need to differentiate SKUs but don't really want to differentiate revisions (at least for some SKUs). Let's add a compatible string match that includes only the SKU but not the revision so that kernel DTSes don't have to specify every possible revision if they want to match this. This patch was adapted from depthcharge's http://crosreview.com/1512004 Change-Id: Ib88862424b350a213761f5662fe170a1f8fccc7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32859 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23console: Move poor-man's atoi() into string.hJulius Werner
vtxprintf.c seems to have been written before string.h was as fleshed out as it is today -- this patch removes some custom implementation of stuff we now have globally. It also makes the skip_atoi() function globally available, because I need it somewhere else, and while we maybe don't want a huge fully-featured string parsing library in coreboot, being able to parse an integer is occasionally useful. Change-Id: Iecb2b970aecfc768540d2bf8b3023445f54853a4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
2019-05-23commonlib/stdlib.h: Remove printf() from corebootJulius Werner
coreboot should not have a definition of printf() anywhere -- it's too easy to accidentally sneak it into code otherwise. Where that is needed in code shared with userspace utilities, we should instead use printk() and define a shim for that for the userspace side. Change-Id: Iaa459df7122c88beb56695eee7c252d90bbde861 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32857 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23endian.h: Add be32dec/be32enc family of functionsJulius Werner
Libpayload has a family of functions that can "encode" or "decode" an endian-specific integer onto a byte stream pointer. These allow writing more pretty code than a raw be32_to_cpu/cpu_to_be32 with pointer casts in many (de-)serialization scenarios, so let's add them to coreboot as well. Change-Id: I049c5665484da12b3cf977a529310b0bde177d2d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32856 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23src/mainboard/google: Adopt Mainboards to changed Type41 FuncChristian Walter
Required for automatic onboard device detection in the next patch. Change-Id: I3087de779faf8d006510c460b5372b22ae54b887 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32909 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23mb/asus/p8h61-m_pro: Add small fixesPatrick Rudolph
* Add VBT * Configure OnBoard NIC * Add documentation Change-Id: Iad739b4e1dacb41f5f63247150951df7013bbf0c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-22mb/google/sarien: Send post code to the ECDuncan Laurie
Use the mainboard post code hook to inform the wilco EC driver of the latest boot stage. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). Change-Id: If5bf69365d8be3bdbd433f305c85848206ded7b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32937 Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22ec/google/wilco: set diagnostic LEDs on boot failureKeith Short
On Wilco devices, if any of the coreboot stages fails with a fatal error, set the diagnostic LEDs with the Wilco EC. The last saved post code is used to determine the error code sent to the EC. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). TEST=Forced a fatal error in both bootblock and verstage to confirm diagnostic LEDs during these stages. This works on cold-boots only. Bug b:132622888 tracks the mailbox failures on warm boots. Change-Id: If865ab8203f89e499130f4677fec166b40d80174 Signed-off-by: Keith Short <keithshort@chromium.org> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-22post_code: add post code for video initialization failureKeith Short
Add a new post code POST_VIDEO_FAILURE used when the Intel FSP silicon initialization returns an error when graphics was also initialized. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ibc7f7defbed34038f445949010a37c8e368aae20 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for hardware initialization failureKeith Short
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to detect or initialize a required hardware component. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for memory errorKeith Short
Add a new post code POST_RAM_FAILURE, used when the Intel FSP code fails to initialize RAM. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ibafefa0fc0b1c525f923929cc91731fbcc1e7533 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for invalid vendor binaryKeith Short
Add a new post code POST_INVALID_VENDOR_BINARY, used when coreboot fails to locate or validate a vendor supplied binary. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ib1e359d4e8772c37922b1b779135e58c73bff6b4 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22post_code: add post code for critical CBFS failuresKeith Short
Add a new post code POST_INVALID_CBFS, used when coreboot fails to locate or validate a resource that is stored in CBFS. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: If1c8b92889040f9acd6250f847db02626809a987 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22post_code: add post code for failure to load next stageKeith Short
Add a new post code, POST_INVALID_ROM, used when coreboot fails to locate or validate a resource that is stored in ROM. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: Ie6de6590595d8fcdc57ad156237fffa03d5ead38 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22post: during post_code, only call elog when enabledJett Rink
Now that we call post_code in other stages other than RAMSTAGE, we need to guard the elog calls with the appropriate condition in order to compile correctly. Change-Id: I766c276f28d46492fb05e0e3be71853e21f4e8e0 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-22mb/up/squared: Add mainboardFelix Singer
Works: - bootblock, romstage, ramstage - Serial console UART0, UART1 - SPI flash console - iGPU init with libgfxinit - LAN1, LAN2 - USB2, USB3 - HDMI, DisplayPort - eMMC - flashing with flashrom externally WIP: - Documentation - VGA For some reason Seabios can not find the CBFS region and therefore it can't load seavgabios, but generally it is working as soon as Linux is booted. - ACPI Works not: - Devices needs proper configuration - Seabios can't find CBFS region Untested: - GPIO pin header - 60 pin EXHAT - Camera interface - MIPI-CSI2 2-lane (2MP) - MIPI-CSI2 4-lane (8MP) - SATA3 - USB3 OTG - embedded DisplayPort - M.2 slot - mini PCIe - flashing with flashrom internally using Linux Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22util/sconfig: Move 'static' at beginning of declarationElyes HAOUAS
When using -Werror=old-style-declaration, gcc reports an error: "'static' is not at beginning of declaration" Tested on 945G-M4 board. Change-Id: I7216a4fab2d5878066c871166e6a481d1f201a9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-22soc/intel/cannonlake: Dump ME f/w version and status informationTim Wawrzynczak
At the end of device enable, print the ME f/w version number. Before resume or loading payload, dump the ME's Host Firmware Status registers. BUG=b:131437724 BRANCH=none TEST=Prints seemingly sane values on WHL and CML devices. Change-Id: Ibeb3a2a85cd84c9baa45f90f20a3dcf69f7d5646 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32527 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22soc/amd/common: Identify AGESA call patternKyösti Mälkki
The entry to AGESA always follows pattern: amd_create_struct() amd_dispatch() amd_release_struct() Separate the create/release_struct calls from the more relevant entry point details. Change-Id: I1037c9daef3365c8672a198ac60f47fc79ffaea1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31488 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-22soc/fsp_baytrail: fix flashconsole on platformMatt DeVillier
Include spi.c in romstage. Since FSP 1.0 can't use NO_CAR_GLOBAL_MIGRATION, adjust global variables in spi.c to use CAR_GLOBAL. Adapted from early versions of CB:21107 Change-Id: I3487fb8ac317ce920bf1c3ef9d89590051932378 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-22soc/{baytrail/braswell/broadwell}: fix flashconsole on platformMatt DeVillier
Enabling flashconsole on these platforms fails to build due to spi.c not being compiled in prior to ramstage. Include in early stages (bootblock/romstage/postcar) as needed to enable flashconsole support. Early inclusion of monotonic_timer.c is needed for Broadwell as well. Change-Id: Idae0578ca92939246021bb85e34b0dcbd41df3b5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-22util/romcc: Prevent out-of-bounds readJacob Garber
If 'class > LAST_REGC', then there will be an out-of-bounds read when accessing 'regcm_bound'. Prevent this by skipping to the next iteration of the loop. Note that this should not generally happen anyway, since 'result' represents a bitset for the indices of 'regcm_bound', and so iterations where 'class > LAST_REGC' should already be skipped by the previous continue statement (since those bits of 'result' should all be zero). Found-by: Covericy CID 1129122 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Id5f5adb0a292763251054aeecf2a5b87a11297b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-22vboot: determine display init before recovery checkEric Lai
Display is required by recovery mode. Determine display init before recovery check. BUG=b:133197727,b:133175864 TEST=enter recovery mode, checked the display shows up Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Id6ac611f51241373bca3e2b394a94dcd52d3fde7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-21soc/intel/fsp1.1: Implement postcar stageArthur Heymans
This moves FSP1.1 to use postcar stage to tear down CAR. On platforms with USE_GENERIC_FSP_CAR_INC the FSP header is found during the postcar stage so there is no need to push to save it in CAR global variables. On FSP1.1 platforms with an open source CAR implementation (Skylake, even though it still runs the FSP-T), the soc/intel/common/blocks/cpu/car/exit_car.S code tears down CAR. This also uses common functions to set up the MTRR to use after CAR is torn down. Test: build/boot on google/celes (BSW) and google/chell (SKL) Change-Id: I2330993842aae9c1365230f0c6bd8a2449dc73a5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-21soc/intel: Remove unused pointer argument in mca_configure()Subrata Banik
Change-Id: Iad3982d9db07a1f17ac39e87ff9c37956e40c258 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-21soc/intel/skylake: Remove redundant mca_configure() in ramstageSubrata Banik
This patch removes redundant mca_configure() function call from ramstage to clear machine check exception. First time it's getting called from soc_core_init() function inside cpu.c file. TEST=Build and boot SKL/KBL/AML platform without any machine-check exception. Change-Id: I7e54fd07816c6317588ab6db06365937c4300ccd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2019-05-21Documentation: Add RotunduPatrick Rudolph
Add information about flash and programming header. Change-Id: If34016e20dd580f92695bef5b67dd0c282b0b421 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-21mb/google/octopus: Create Garg variantKevin Chiu
This commit creates a garg variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:132668378 BRANCH=master TEST=emerge-octopus coreboot Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-05-21src/arch/arm64: Remove variable set but not usedElyes HAOUAS
Change-Id: I4fe5771dd1ebf3d2a981dab08e98f1c018d14133 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting. BUG=b:131742713 TEST=headset is working Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-21util/romcc: Fix parsing of empty string literalJacob Garber
The corner case of an empty string literal was causing romcc to segfault. This checks if the literal is empty, and if so allocates a size one buffer for the terminating null character. A test case for this is added to ensure it doesn't happen again. Found-by: Coverity CID 1129099 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I067160a3b9998184f44e4878ef6269f372fe68bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/32852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-21util/romcc: Free variable after it is usedJacob Garber
Free 'arg_type' after it is used to prevent a memory leak. Found-by: Coverity Scan CID 1129114 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I5e8661547bb7623463ed23fc45269049ffb8c50e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-21util/romcc: Use 64 bit integers when shiftingJacob Garber
'used_indices' is 64 bits wide, so use a fixed-width type to make that clear. As such, 'index' can have a value of up to 63, so use a 64 bit integer when doing the shifts to prevent overflow. Found-by: Coverity Scan CID 1287090 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ibd089df6be60c8ea46da11e5e83cd58b2e2c54d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32854 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21binaryPI/00670F000: Remove AGESA.c fileKyösti Mälkki
Change-Id: Id48de8b2f6feb6c29d745140c872215faa32eb37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31487 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21soc/amd/common: Refactor AmdCreateStruct() useKyösti Mälkki
AmdCreateStruct() and AmdReleaseStruct() are equally bad when it comes to lack of correct function declarations for definitions found in vendorcode binaryPI/AGESA.c. Replace these with calls that go through the common module_dispatch() functions. Change-Id: I611bcbe2a71fb65c8eb759a9dc74cbd9cb74136e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31486 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21mb/lenovo/r500: Add mainboardArthur Heymans
Tested: - Ethernet NIC - Wifi RFKill - USB - LVDS, VGA with libgfxinit - Booting with dock attached (COM1) - Keyboard, trackpoint - SeaBIOS 1.12 - S3 resume - Tested in descriptor mode, with vendor FD and ME - Add VBT to ACPI OPregion Untested: - SATA (likely works) - Trackpad (my cable is broken, likely works) - Displayport (likely works) - Descriptorless mode - DVD drive - Extra battery - model with ATI GPU Does not work: - Dock hotplug - Quad core CPU (hangs during AP init, probably needs hardware mod) - Hotplugging the expresscard slot (works with 'echo 1 | sudo tee /sys/bus/pci/rescan') TODO: - proper dock support - documentation note: This board was hard to flash, I had to desolder the flash. TESTED: on a R500 with an Intel iGPU, SeaBIOS 1.12, Debian 9, Linux 4.9 from USB Change-Id: I9e129b2e916acdf2b8534fa9d8d2cfc8f64f5815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21mb/lenovo/t400: Add VBT fileArthur Heymans
All variants (t400, r400, t500, w500) use the same OPROM for the IGD. Change-Id: I1b9db7b29b22809542f80f60a5e2eb3283fe1c02 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21src/drivers/intel/fsp2_0: Fix logical 'and' of equal expressionsElyes HAOUAS
Probably a copy/paste issue. Change-Id: I0334bc1f5d145df5af0a307cf8e7c23cc0605f76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Configure SPI CS parameters in FSP UPD.Tim Wawrzynczak
When FSP UPD parameters are configured, also configure the GSPI CS lines appropriately. GSPI driver assumes CS0 is the CS signal to use. BUG=b:130329260 BRANCH=None TEST=Boot Kohaku, TPM communcation still functional. Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f15tn: Update microcode to version 0x600111F 2018-03-05Mike Banon
This microcode update for CPU IDs 0x610F01/0x610F31 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x600110F [2012-01-11] replaced by New version: 0x600111F [2018-03-05] Change-Id: Ied5da0ff85abb63c2db2eeafd051b8e00916d961 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28273 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: <awokd@danwin1210.me> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f16kb: Update microcode to version 0x7000110 2018-02-09Mike Banon
This microcode update for CPU ID 0x700F01 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x700010B [2013-07-09] replaced by New version: 0x7000110 [2018-02-09] Change-Id: Iebe6e54d922378a8a1feb97f37b08ac50c8234b2 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28370 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
sarien/arcada: GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM. hatch: GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/dragonegg: Override FSP default GPIO PM configurationSubrata Banik
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration. GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot CML. Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/icelake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot ICL. Change-Id: Ic30a490aadb8cc9c05a19a05533ab0196c69b7f1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/common/block/gpio: Add gpio_pm_configure() functionSubrata Banik
This patch adds new function to perform gpio power management programming as per EDS. BUG=b:130764684 TEST=Able to build and boot from fixed media on ICL and CML. Change-Id: I816a70ad92595f013740a235a9799912ad51665e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20i945: Add device identification D2:F1Elyes HAOUAS
Add device identification D2:F1 for desktop version. (see Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family datasheet page 192) Change-Id: Ie060644d635a7031ee6f55420d63751192481091 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-20util: Fix typo on plural form of indexElyes HAOUAS
Change-Id: Idc165f8eafacf3130a29b701bc3610c1a67f69d5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-05-20console: Add new function die_with_post_code()Keith Short
Add a new helper function die_with_post_code() that generates a post code and an error string prior to halting the CPU. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I87551d60b253dc13ff76f7898c1f112f573a00a2 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32838 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20util/scripts: update references to cross-repo-cherrypickJett Rink
It appears that the rebase.sh script was renamed to cross-repo-cherrypick and changed directories. Update comments to reflect that change. Change-Id: I863df48378feb48c9b195b1778dcaf1972a4f105 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-20sb/amd/cimx/sb800: Get rid of power button device in corebootPaul Menzel
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD Brazos boards [1]: > As per the ACPI specification, there are two types of power button > devices: > 1. Fixed hardware power button > 2. Generic hardware power button > > Fixed hardware power button is added by the OSPM if POWER_BUTTON flag > is not set in FADT by the BIOS. This device has its programming model > in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this > power button device by default if the power button FADT flag is not > set. > > On the other hand, generic hardware power button can be used by > platforms if fixed register space cannot be used for the power button > device. In order to support this, power button device object with HID > PNP0C0C is expected to be added to ACPI tables. Additionally, > POWER_BUTTON flag should be set to indicate the presence of control > method for power button. [..] > This change gets rid of the generic hardware power button from all > google mainboards and relies completely on the fixed hardware power > button. The same problem exists with the AMD Hudson devices in coreboot. For AMD Hudson (2) and Yangtze based devices this was removed in commit 44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power button) [2]. Two devices are detected. $ dmesg | grep Button [ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.209254] ACPI: Power Button [PWRB] [ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.209349] ACPI: Power Button [PWRF] $ sudo evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Power Button /dev/input/event1: Power Button [..] [1]: https://review.coreboot.org/5546 [2]: https://review.coreboot.org/27272 Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
The system should boot fine to OS on pressing power button before the system enters G3. However, on hatch, we observe that the system waits for few seconds at "Starting kernel" and then resets, with SD card tray inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD# pad reset config to PLTRST. BUG=b:129933011 TEST=Built and verified on hatch. Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/braswell/pmutil.c: Use GEN_PMCON1 for RTC statusFrans Hendriks
cbmem_find is not available in every stage. Remove usage of cbmem_find() and use GEN_PMCON1 always. BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-20mb/google/octopus: Override emmc DLL values for CastaJamie Chen
New emmc DLL values for Casta BUG=b:122307918 TEST=Boot to OS on 12 systems Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-05-20security/vboot/vboot_crtm.h: Remove ENV_ for vboot_measure_cbfs_hook()Frans Hendriks
vboot_measure_cbfs_hook() is included when CONFIG_VBOOT_MEASURED_BOOT is enabled, but this function is defined as 0 in vboot_crtm.h using ENV_ Remove ENV_ for vboot_measure_cbfs_hook() function definition. This function is added to bootblock stage also. BUG=NA TEST=Build Google Banon and Google Cyan Change-Id: Ic62c18db09c119dfb85340a6b7f36bfd148aaa45 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-20vboot: save whether developer mode is enabledJoel Kitching
Save whether or not vboot has selected developer mode as a flag in vboot_working_data. Other coreboot code may access this flag without needing to consult vboot_handoff (which is in the process of being deprecated). BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ieb6ac4937c943aea78ddc762595a05387d2b8114 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-20src/Kconfig: Move DRAM section to src/lib/KconfigElyes HAOUAS
These Kconfigs are mostly used in src/lib/. Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32882 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-19timestamp: Update TIMESTAMP_CACHE_IN_BSS to include ENV_POSTCARFurquan Shaikh
With CB:32726 ("lib/timestamp: Make timestamp_sync_cache_to_cbmem() in postcar") timestamps are synced from cache to cbmem in postcar as well. For postcar, the cache lives in BSS just like ramstage. This change updates TIMESTAMP_CACHE_IN_BSS to include both ramstage and postcar and uses this instead of ENV_RAMSTAGE to check for cache location. Ideally, it would be good to get rid of timestamp cache in postcar and ramstage completely since early cbmem init is enabled by default in coreboot and it is guaranteed that cbmem is recovered before timestamps are added in ramstage or postcar. This change is being pushed in as a temporary fix while I make the changes to remove timestamp cache from romstage and postcar completely. BUG=b:132939309 Change-Id: I2d82a96aba954df77c9386b7bd2e2ec0973881be Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-18vendorcode/google/chromeos: Correct VPD field for MAC passthroughSimon Glass
The VPD field name is dock_passthrough, not dock_passthru. Fix it. (I assume there is no length limit) BUG=b:132689337 TEST=check that the feature can now be controlled by the associated enterprise policy Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-18SMBIOS: Fix SPD manufacture ID decoderLijian Zhao
According to JEP106 from JEDEC, fix manufacture ID of Crucial, Super Talnet and Micron. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I10a268a7f3bde405b95bd3a16d5d121be623c7ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/32837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-18soc/intel: Fill DIMM serial number from SPDDuncan Laurie
Fill the DIMM serial number field for SMBIOS from the saved SPD data that is returned by FSP. BUG=b:132970635 TEST=This was tested on sarien to ensure that SMBIOS type 17 filled the serial number from the DIMM: Handle 0x000B, DMI type 17, 40 bytes Memory Device Locator: DIMM-A Serial Number: 41164beb Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-18mb/google/sarien: Set serial number in SMBIOSDuncan Laurie
Set the system serial number from the VPD key "serial_number" and the mainboard serial number from the VPD key "mlb_serial_number". BUG=b:132970635 TEST=check serial number is set in SMBIOS based on VPD, and if there is no VPD key found then it is empty. Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-17soc/qualcomm/sdm845: Fix broken KconfigPatrick Rudolph
This fixes the following changes, which made qualcomm Kconfig appear on all platforms: bd0b51c0be1ec2c9a5f02de3c13108c13941e2c2 7a3e46d767890f502b09771e19decc5033e27079 Use proper Kconfig logic. Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-17src/include/assert.h: add noreturn attribute to dead_code()Alan Green
Clang does not recognize dead_code() as termination of execution. It gives this message: error: control reaches end of non-void function [-Werror,-Wreturn-type] This change adds an __attribute__((noreturn)) to ensure that clang recognises that this function will terminate execution. This change is more general solution to the problem that was addressed in the specific at https://review.coreboot.org/c/coreboot/+/32798 Signed-off-by: Alan Green <avg@google.com> Change-Id: I5ba7189559aa01545d5bbe893bced400a3aaabbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/32833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16nb/intel/sandybridge: Move DMI init codePatrick Rudolph
Move the DMI initialization code to northbridge folder. Leave southbridge specific settings in bd82x6x folder and call it from northbridge code. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-16sb/intel/bd82x6x/early_pch: Make use of RCBA and DMIBAR marcrosPatrick Rudolph
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-16sb/intel/sandybridge/early_pch: Make DMI init more readablePatrick Rudolph
Add a few comments and use known register values. Based on the "2nd Generation Intel® Core™ Processor Family Mobile" datasheet and the existing serialice trace. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to GNU/Linux. Change-Id: I404515b77a22324f55581f117d79630be4ba64dd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16mb/gigabyte/ga-b75m-d3{h,v}: Various cleanupsAlex James
- Enable LPC TPM support in Kconfig and add pc80/tpm to devicetree - Enable VBT support in Kconfig and add VBT files extracted from vendor firmware - Remove IGPU VBIOS entries from Kconfig - Remove unused PS2 definitions in superio.asl - Add PWRB ACPI device entry to mainboard.asl - Remove duplicate chipset register initialization from mainboard.c - Move ITE Super I/O configuration to mainboard_config_superio in romstage.c Signed-off-by: Alex James <theracermaster@gmail.com> Change-Id: I2d11c55dc809b920bccf55f5f745d9f29b18bbb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-16soc/qualcomm/common: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16mb/ocp/monolake: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16libpayload: make log2 and clz work on signed values internallyPatrick Georgi
Needed to make libpayload build clean with -Wconversion. BUG=b:111443775 BRANCH=none TEST=make junit.xml shows fewer warnings with -Wconversion enabled Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-16{arch,cpu}/x86, drivers/intel: Restore cpu_index error handlingJacob Garber
Previously cpu_index() always succeeded, but since commit 095c931 (src/arch/x86: Use core apic id to get cpu_index()) it is now possible for it to indicate an error by returning -1. This commit adds error handling for all calls to cpu_index(), and restores several checks that were removed in commit 7c712bb (Fix code that would trip -Wtype-limits) but are now needed. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I5436eed4cb5675f916924eb9670db04592a8b927 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-16Documentation/lessons: Tidy up lesson 2Jacob Garber
- The link to create an account is now "Sign in" and not "Register" - Use monospace formatting for terminal commands and file names - Properly escape less-than and greater-than - Correct the 'make lint' example command - Reformat example commit messages - Add formatting for website links - Other whitespace fixes Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I9931bef8c30387d1c08b59973d6de9b5c0419814 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-16mb/google/sarien: leave gpio pads unlocks during fspJett Rink
The FSP will lock down the configuration of GPP_A12, which makes the configuration of the GPIO pin on warm reset not work correctly. This is only needed for the Arcada variant since it is the only variant that uses ISH. BRANCH=sarien BUG=b:132719369 TEST=ISH_GP6 now works on warm resets on arcarda Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/stoneyridge: Move I2C bus clear out of gpio.cMarshall Dawson
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first went in, gpio.c was a natural location due to the nature of the algorithm. This is preparation for moving most of gpio.c to common code. Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/common: Create AcpiMmio functionality from stoneyridgeMarshall Dawson
Move the stoneyridge AcpiMmio code into soc/amd/common. The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000 commonly known as AcpiMmio. Implementations beginning with Mullins enable decode in PMx04. Older designs use PMx24 and allow for configuring the base address. Future work may support the older version. Comparing the documentation for AMD's RRGs and BKDGs, it is evident that the block locations have not been reassigned across products. In some cases, address locations are deprecated and new ones consumed, e.g. the early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks are now at 0x1500, 0x1600, and 0x1700. Note: Do not infer the definitions within the hardware blocks are consistent across family/model products. BUG=b:131682806 Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/intel/skylake: Correct GPIO pointer assignmentJacob Garber
We need to store the acpi_gpio struct, not save its address. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-16drivers/elog: Rename ramstage_elog_add_boot_count() to elog_add_boot_count()Subrata Banik
This patch removes ramstage_ prefix from ramstage_elog_add_boot_count() function. Change-Id: Ia75b2dc959ace7dc26dc974c5f4b5cb6c5a25617 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-16Remove remaining unnecessary ENV_RAMSTAGE guardSubrata Banik
TEST=Able to build coreboot for CML. Change-Id: I8a6a97d59277ebfc498c83bb039436ed7c89d2cd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-15payloads/coreinfo: Remove unused variableJacob Garber
The 'last' variable is unused, and has been for the entire history of this file. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-15util/lint/check-style: Don't hardcode clang-format pathAlex James
Signed-off-by: Alex James <theracermaster@gmail.com> Change-Id: I688cb60c98370bf74aa8554bab43594ff84c4e24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 13:21:14 +0000