summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-08tests: Add lib/fmap-test test caseJakub Czapiga
Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I885ea05d509d3b1330de7a18531f310d290c6965 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-08ec/google/chromeec: add SSFC CBI supportMarco Chen
An API is added to get SSFC value from cros EC. BUG=b:174118027 BRANCH=octopus TEST=check SSFC value from EC is correct compared to value in CBI Change-Id: Ifd521514bbc2e90c789f3760b72e8326e614e2b1 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-08soc/intel/common/uart: Restrict scope of uart_common_init to uart.cFurquan Shaikh
uart_common_init is not used outside of soc/intel/common/block/uart.c. This change restricts the scope to this file and drops the declaration from uart.h Change-Id: I499a53506f9b2e91ecc7334bf9b023d342e802fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49211 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel/common: Pass in pci_devfn_t into lpss_set_power_stateFurquan Shaikh
This change updates the parameter passed into `lpss_set_power_state()` from struct device * to pci_devfn_t. This allows the users in the early stages to use pci_devfn_t instead of having to walk the device tree to get a pointer to the relevant device structure. It is important for optimizing out unnecessary components of the device tree from the early stages. Change-Id: Ic9e32794da65348fe2a0a2791db47ab83b64cb0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49210 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08soc/intel: Drop `dev` parameter from soc_get_gen_io_dec_range()Furquan Shaikh
This change drops the parameter `struct device *dev` from the function `soc_get_gen_io_dec_range()`. This function uses the parameter dev to get a pointer to config structure for extracting the decode ranges configured by mainboard in device tree. However, there is no separate chip driver for the LPC device which means that the SoC code can use `config_of_soc()` to get to SoC chip config instead of using the LPC device. This change is being done in preparation to clean up the device tree/chip config access in early stages that allows for optimizing the inclusion of device tree elements in the early stages. Change-Id: I3ea53ddc771f592dd0ea5e5e809be2d2eff7f16d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08cpu/x86/smm: Use append instead of assign for smm-c-depsFurquan Shaikh
This change uses append operation (+=) instead of assignment (:=) for smm-c-deps to ensure that any earlier assignment is not overwritten. Change-Id: Ic1d62b414cfe3f61ee2b80b026b7338faa186904 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08soc/intel/tigerlake: Enable USB2 port reset message on Type-C portsJohn Zhao
USB3 is in CPU and USB2 in PCH on Tigerlake. Cross die messaging is implemented between CPU and PCH through the IOSF SB bridge. a PCH xHCI USB2 port reset event issued by the xHCI driver shall trigger a message upstream to CPU to wake it from the low power state which allows a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Built and booted to kernel on Voxel board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I672f30a117980bc10bd71e9b77c5fa76286b9f5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49052 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08util/testing: remove genprof targetFelix Held
commit 8c99c27df10f6c5a120e41ffb0948e357f5a2d20 removed util/genprof, so it needs to be dropped here as well to avoid spurious breakages of the build. Change-Id: I420b5c43e2d97373a8e665f457463a06e16ecfb9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49226 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08ec/google/chromeec: Check AP reset cause for watchdog resetYu-Ping Wu
Different from mt8183, mt8192 doesn't need to trigger EC reboot on HW initiated watchdog reset. Therefore, ec_reset_flags cannot be used to determine AP watchdog reset. Instead we check the cause of the last AP reset. BUG=b:174443398 TEST=emerge-asurada coreboot TEST=crash.WatchdogCrash passed on asurada BRANCH=none Cq-Depend: chromium:2607150 Change-Id: I761ecdd8811e5612b39e96c73442cc796361d0f0 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49113 Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08ec/google/chromeec: Update ec_commands.hYu-Ping Wu
This change copies ec_commands.h directly from the Chromium OS EC repo at SHA afffc28f2, with the exception of changing the copyright header to SPDX format. Change-Id: Ie02e0295312050e803a7d701ec4eed1dadfa6c9a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-08cpu/intel/model_206ax: Always return a package from _CSTAngel Pons
The _CST method is supposed to return a package. If a mainboard used zero for all ACPI C-states, the generated _CST would return nothing, which is invalid. Instead, return a package with no C-state entries. This change is a no-op, since all mainboards have at least one valid ACPI C-state. This is what `acpigen_write_CST_package()` does, too. Change-Id: I1f531e168683ed108a8d6d03dee6f5415fd15587 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49092 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08sb/intel/bd82x6x: Remove space in function definitionAngel Pons
Just a small change to follow the code style. Change-Id: Ie838b82e12627478ea721f426efc4d557feb6ae3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49166 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Update copano device treehao_chou
Update device tree override to match schematics. BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1fb006d750bb2d670885ec8ccc627436c5078072 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-08mb/google/volteer: Add GPIO to copano supporthao_chou
Add support for gpio driver for copano BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1e0f730c9865ed77c7071245b071315a9c6ea4c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48951 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Copano: Update SPD tablehao_chou
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/copano/memory/ src/mainboard/google/volteer/variants/copano/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I2ace17e8fff12d3f5de15a35f609265d8b6ed6b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48948 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/zork: Unmap FCH IO-APIC PCI interruptsRaul E Rangel
Now that the _PRT generates a GNB IO-APIC routing table we no longer need to route the PCI interrupts through the FCH IO-APIC. This change unmaps the IRQs since they are no longer used. BUG=b:170595019 TEST=Boot with `pci=nomsi amd_iommu=off` and verify /proc/interrupts Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3467934bfcac14311505bec49a12652490554e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08soc/amd/picasso: Generate GNB IO-APIC PCI routing tableRaul E Rangel
This adds support for generating a PCI routing table that routes to the GNB IO-APIC. This means we no longer need to route to the FCH IO-APIC for PCI interrupts. BUG=b:170595019 TEST=Boot ezkinil to OS with `pci=nomsi amd_iommu=off` and verify all peripherals are working CPU0 CPU1 0: 112 0 IO-APIC 2-edge timer 1: 0 99 IO-APIC 1-edge i8042 4: 0 2523 IO-APIC 4-edge ttyS0 5: 34632 0 IO-APIC 5-fasteoi mmc1 7: 5646 0 IO-APIC 7-fasteoi pinctrl_amd 8: 0 0 IO-APIC 8-edge rtc0 9: 0 33 IO-APIC 9-fasteoi acpi 10: 88258 0 IO-APIC 10-edge AMD0010:00 11: 0 32485 IO-APIC 11-edge AMD0010:01 24: 3301 0 amd_gpio 3 cr50_i2c 25: 0 235214 IO-APIC 28-fasteoi amdgpu 26: 67408 0 IO-APIC 31-fasteoi xhci-hcd:usb1 27: 0 488876 IO-APIC 8-fasteoi mmc0 28: 1265 0 amd_gpio 9 PNP0C50:00 29: 656 0 amd_gpio 12 ELAN9004:00 30: 413 0 amd_gpio 31 chromeos-ec 31: 14153 0 IO-APIC 4-fasteoi ath10k_pci 32: 2 0 sysfstrig0 cros-ec-accel_consumer3 33: 2 0 sysfstrig0 cros-ec-accel_consumer0 34: 6 0 amd_gpio 62 rt5682 35: 0 38937 IO-APIC 29-fasteoi snd_hda_intel:card0, ACP3x_I2S_IRQ Cq-Depend: chrome-internal:3452710 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3211ab351a332fafb7b5f9ef486bb6646d9a214c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08pineview boards: Drop MAINBOARD_HAS_NATIVE_VGA_INITAngel Pons
Already selected from northbridge Kconfig. Change-Id: I5a30769b4186041a15fd1264bb0d6efa32cb6eb4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49182 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08arch/x86/Makefile.inc: Clean up generated assembly stubsArthur Heymans
At the moment neither verstage nor romstage has a generated assembly stub. This was used when CAR was set up in romstage which is not the case anymore. Change-Id: Ia4a952f269cc2b3edf1290c80b7a63619c8c6c95 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08payloads/external: Update cbfs-ints with CONFIG_UPDATE_IMAGEArthur Heymans
Change-Id: Icfbfff3ba680a85eb2f683867064b19f40b9d40f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48898 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08*/Makefile.inc: Add some INTERMEDIATE targets to .PHONYArthur Heymans
Change-Id: I125e40204f3a9602ee5810d341ef40f9f50d045b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48897 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08util/crossgcc/.gitignore: Add cmakeArthur Heymans
Change-Id: I5ce346515f4468699396e214acfaa3b62f6d891d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08ec/system76/ec: Remove unused EC RAM fieldsJeremy Soller
These fields were originally added for compatibility with the proprietary ITE EC firmware, but the System76 EC firmware does not use them. Take the opportunity to document most of the fields as well. Change-Id: I5581437c67ec67705ce16ba20254183a0261fd83 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08cbfstool: Use flock() when accessing CBFS filesJulius Werner
Trying to do multiple operations on the same CBFS image at the same time likely leads to data corruption. For this reason, add BSD advisory file locking (flock()) to cbfstool (and ifittool which is using the same file I/O library), so that only one process will operate on the same file at the same time and the others will wait in line. This should help resolve parallel build issues with the INTERMEDIATE target on certain platforms. Unfortunately, some platforms use the INTERMEDIATE target to do a direct dd into the CBFS image. This should generally be discouraged and future platforms should aim to clearly deliminate regions that need to be written directly by platform scripts with custom FMAP sections, so that they can be written with `cbfstool write`. For the time being, update the legacy platforms that do this with explicit calls to the `flock` utility. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I022468f6957415ae68a7a7e70428ae6f82d23b06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-08mb/google/dedede: Enable "FastPkgCRampDisable" upd for noise mitigationMaulik V Vaghela
As part of acoustic noise mitigation calibration, we need to enable FastPkgCRampDisable upd along with slew rate = 1. This values has been derived based on noise calibration done. Please refer document 575216 for procedure. BUG=None BRANCH=dedede TEST=correct value has been programmed and slew rate measurement is correct on scope. Change-Id: Ie42c8ab647ff42fa043b6f717a9834f9b9c551f6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Update acoustic noise related parametersMaulik V Vaghela
We need to fill Acoustic noise mitigation related UPDs only in case when acoustic noise mitigation is enabled. This will also clarify the user that they need to enable Acoustic noise mitigation while using this config in mainboard. We're only filling UPD for domain VR index 0 since there is only one VR domain for JSL (VCCIN VR). Reference: JSL EDS (Document# 613601) (Chapter 3.4) BUG=None BRANCH=dedede TEST=UPD values are getting filled correctly when Acoustic noise mitigation is enabled. Change-Id: I0cf4ccfced13b0d32b3d20713eace63e66945332 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-08soc/intel/jasperlake: Enable USB2 PHY SUS PG for s0ix qualificationKrishna Prasad Bhat
USBSUSPGQDIS is a disqualifier bit which will allow platform to enter s0ix even if USB2 PHY SUS is not power gated. Disabling this bit will ensure that USB2 PHY SUS is power gated before entering s0ix. BUG=b:175767084 BRANCH=dedede TEST=s0ix works on drawcia and USB wake from s0ix works fine. Change-Id: I20bad3f79141799c88a16272ea822b9e3dede504 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-07ACPI: Remove ACPI_NO_SMI_GNVSKyösti Mälkki
This was used as a guard to not raise SMI with APM_CNT_GNVS_UPDATE. The handler has been removed now completely. Change-Id: I7726367fd16630aa4b4b25b24b05f740645066db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-07soc/amd/picasso: Add GRXS and GTXS methodEric Lai
Add GRXS and GTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1aa6a8f44f20577e679336889c849dd67cb99f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-07soc/amd/picasso: Add STXS and CTXS methodEric Lai
Add STXS and CTXS into gpiolib. We can align with Intel ACPI method for the better usage. This benefits acpi.c to be more clear, too. BUG=b:176270381 BRANCH=zork TEST=Confirm the Goodix touchscreen functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If4fcd68496a712fdccf44b91a6192ef58a0a9733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48943 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I44f086af6b5dd552efd2bd1ef4db0d69b652826d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-07security/intel/txt: Don't run SCHECK on CBnTArthur Heymans
This functionality only exists on legacy TXT. Change-Id: I4206ba65fafbe3d4dda626a8807e415ce6d64633 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07mb/google/dedede: Add support for charger throttlingSumeet Pawnikar
Add charger current throttling support for dedede baseboard BUG=None BRANCH=None TEST=Built and tested on boten system Change-Id: I79edba579249111294a982590660196f05be7eaf Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07arch/x86: Move prologue to .init sectionKyösti Mälkki
For arch/x86 the realmode part has to be located within the same 64 KiB as the reset vector. Some older intel platforms also require 4 KiB alignment for _start16bit. To enforce the above, and to separate required parts of .text without matching *(.text.*) rules in linker scripts, tag the pre-C environment assembly code with section .init directive. Description of .init section for ELF: This section holds executable instructions that contribute to the process initialization code. When a program starts to run, the system arranges to execute the code in this section before calling the main program entry point (called main for C programs). Change-Id: If32518b1c19d08935727330314904b52a246af3c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47599 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07cpu/intel/haswell: Rename `HASWELL_BCLK` to `CPU_BCLK`Angel Pons
This is just to ease merging with Broadwell. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I9239489fe48f04714e6626b57ef07ca8b3013024 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46910 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/asrock/h110m: Remove MAINBOARD_POWER_ON_AFTER_POWER_FAILMartin Roth
The MAINBOARD_POWER_ON_AFTER_POWER_FAIL symbol was removed in Commit 9faae2b939. The default is currently to keep power off after a power failure. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ib2ef450f5c64f663b9aa88f8870250e92898e308 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47671 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07soc/intel/icelake: Remove unused ENABLE_DISPLAY_OVER_EXT_PCIE_GFXSubrata Banik
Mainboard user can select VGA_ROM_RUN_DEFAULT Kconfig hence no need to have another ENABLE_DISPLAY_OVER_EXT_PCIE_GFX Kconfig to load/execute VGA OpRom. Change-Id: Id87f82d9c3657afad9db94b1ec0917121edfe2bb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/volteer/var/elemi: Tune i2c frequencyWisley Chen
Tuning i2c frequency for elemi I2C0: 396.6 KHz I2C1: 395.9 KHz I2C5: 397.1 KHz BUG=b:176794161 BRANCH=volteer TEST=emerge-voleteer coreboot, and measure i2c clock. Change-Id: I23b04a9b5ff8873d9de12e762e8e2786ef474ac0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-07mb/google/dedede/var/metaknight: update Goodix touch screen sequenceTim Chen
Update Goodix touch screen reset delay time to 180ms. BUG=b:176213670 TEST=Build and boot Metaknight to OS. Change-Id: I5801a36fb7c03b23046df16b1eaf4c548241bba5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/zork: Modify variant to Shuboz supportKane Chen
1. Add ELAN touchscreen/touchpad to overridetree.cb 2. Follow Dalboz setting to add variant.c BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ic3193ca7957251841e75a7e5c7a16fc5047919fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48001 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/intel/jasperlake_rvp: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
Make EC_GOOGLE_CHROMEEC_SWITCHES depend on VBOOT, rather than force selecting it. Change-Id: If96b2a935d2f7388a24be7d8e65c7dfc2c89a0fc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07mb/intel/adlrvp: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
Make GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC depend on VBOOT, rather than force-select it. Change-Id: I0ec418d4182865636b6350f1ee151420d8e02c33 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-01-07mb/google/lindar: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
Make CHROMEOS_DSM_CALIB depend on CHROMEOS, rather than force-select it. Change-Id: I4c3fd04ec00e0787381c58810938dd48f414635c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07soc/intel/common/cse: Drop dependency on CHROMEOS for SOC_INTEL_CSE_LITE_SKUMatt DeVillier
The CSE lite SKU has 2 CSE firmware boot partitions vs 3 for the "normal" SKU; this has nothing to do with building for ChromeOS or not, and by having this dependency, boards with select the CSE lite SKU are unable to build with CONFIG_CHROMEOS unset due to Kconfig dependency issues. Test: build google/wyvern with CONFIG_CHROMEOS not set. Change-Id: I6959f35e1285b2fab7ea1f83a5ccfcb065c12397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07mb/google/puff/var/dooly: Config I2C0 SerialIoDevModeTony Huang
I2C0 has amplifier connection, thus set it to PchSerialIoPci. BUG=b:170273526 BRANCH=puff TEST=Build and check PCH serial IO config is set I2C0 to Mode 1 Change-Id: I9540f7b5538d37de53bcf43531488d714874a565 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2021-01-07cpu/intel: add PC10 residency counter MSRMichael Niewöhner
This MSR will be used in the follow-up changes. Change-Id: Ia6f74861502d4a9f872b2bbbab2e5f1925a14c4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49044 Reviewed-by: Lance Zhao Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/razer/blade_stealth_kbl: Remove comments with pad functionsMaxim Polyakov
Remove these comments, because it does not contain useful information that helps to understand the circuit, which we do not have. Tested with BUILD_TIMELESS=1, Razer Blade Stealth, remains identical. Change-Id: I8a8450493ceebe97ac03b4134adc46b01328a1b6 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-07mb/google/dedede/var/magolor: modify raydium touch screenRen Kuo
modify raydium touch screen power on timing to meet requirement BUG=b:174280232 TEST=build firmware and measured the timing Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3ecc9d8e21f8c76e9e96cf050dcde83c3c4f4ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48971 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/dedede/var/metaknight: Configure I2C high and low timesTim Chen
Configure the I2C bus high and low times for port0,2 and 4 I2C buses. BUG=b:176519792 TEST=Measured the I2C bus frequency lower than 400 KHz. Change-Id: Ieed038c93f0972c06cb3fa311742dd22ac2e875d Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/madoo: Update Goodix touchscreen power sequenceDtrain Hsu
Follow Goodix datasheet (GT7375 Programming Guide_Rev.0.1.pdf and GT7375P Programming Guide_Rev.0.6.pdf) to tune touchscreen power sequence. Increase reset_delay_ms from 120ms to 180ms. BUG=b:176511605 BRANCH=dedede TEST=Build and boot Madoo to OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iae35e4da31a3c3afd24c7daf81a5a3e762acd3b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-07mb/google/dedede/var/boten: Configure I2C high and low timeStanley Wu
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:168783630 TEST=Measured the I2C bus frequency reduce to 387 KHz. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I37403dd3ac3c9320398207d2111e1ddb73d6a130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchscreen/audioTony Huang
Config I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). These tuning value is applied from touchpad as a base line, and EE measured touchscreen/audio runs at 399/396.7kHz after tuning. BUG=b:173709409 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: I970d69e6361d7cf6fcfc4e5b0b3c5fbfa885367c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchpadTony Huang
BUG=b:173709409 BRANCH=dedede TEST=EE measured result is 390.8kHZ Change-Id: I7a6475fd29d4c9f8efa78a42a112b5565511b939 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/zork/var/vilboz: Fix Goodix touchscreen power sequenceFrank Wu
According Goodix GT7375P Programming Guide_Rev.0.6, increase the stop delay time from 100 ms to 160 ms. The power sequence is not met with the latest guide_rev.0.6. BUG=b:176270381 BRANCH=zork TEST=Confirm the measured waveform complies with Goodix touchscreen spec. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I687ffa2eb13a9ddecb3045c5e1540b94417329ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/48907 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07soc/mediatek: rtc: Use `bool` as return typeYidi Lin
BUG=b:176307061 TEST=emerge-asurada coreboot; emerge-kukui coreboot emerge-oak coreboot boot to shell on Asurada Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id31fa04edc2920c1767d9f08ab7af0ab4a15bc24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-06soc/intel/broadwell: Move MAX_CPUS from mb to SoCFelix Singer
All Broadwell boards use 8 for MAX_CPUS, so this option can be factored out into SoC Kconfig. Change-Id: I311b95ea75a7c6b76b32c7197a0cec86db644234 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06mb/intel/wtm2/Kconfig: Limit MAX_CPUS to 8Angel Pons
Haswell and Broadwell have at most 8 threads. Change-Id: Idcccf22addb6e15d7c55b9816141af47d6186cca Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46952 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06mb/google/volteer/var/voema: Update Aux settings for Port 0David Wu
On Voema port 0 (MB PORT) does not have a retimer so the port needs to be configured for the SOC to handle Aux orientation flipping. BUG=b:176462544 TEST=tested on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I3d31a5b848f56126f8ffe2babb29085471e8224f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2021-01-06mb/amd/mandolin/mainboard: Remove unused pirq_dataRaul E Rangel
This table was wrong. It's also produced by the SoC code now. BUG=b:170595019 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifcc406591abf88ebdb5ed972614c3a6901721bac Reviewed-on: https://review.coreboot.org/c/coreboot/+/48667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-06mb/google/zork/mainboard: Remove unused pirq_dataRaul E Rangel
This table was wrong. It's also produced by the SoC code now. BUG=b:170595019 TEST=Verify PCI IRQ: log messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I008b6896064672f9d45a8e12f6cfc62c0cc41536 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-06soc/amd/picasso: Correctly populate the PCI interrupt line registerRaul E Rangel
The PCI interrupt line registers are used as a last resort if routing can't be fetched from either ACPI or the MPTable. This change correctly sets the registers. It overrides the pirq_data set by the mainboards since the routing is fixed in AGESA. BUG=b:170595019 TEST=Boot ezkinil with `pci=nomsi,noacpi amd_iommu=off noapic` Verified all PCI peripherals are still functional. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If5d4d8f613c8d0fa9b43cefa804824681c3410d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-06soc/amd/picasso: Fix ACPI PCI routing tableRaul E Rangel
The original routing table did not handle all 8 INTx interrupts. Additionally it also didn't take the swizzling into account. Now that we know how AGESA programs the routing table we can correctly generate it. We still route the PCI interrupts through the FCH IOAPIC. A follow up will have the GNB IOAPIC handle the PCI interrupts. There is still work to be done to fix the legacy PCI_IRQ register for each PCI device. We can then remove the mainboard_pirq_data from each mainboard. BUG=b:170595019 TEST=Used ezkinil Boot kernel with `pci=nomsi amd_iommu=off noapic` and `pci=nomsi amd_iommu=off` then verified system was usable and verified /proc/interrupts looked correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2b2cce9913081d5cd456043ba619a79c1dfd4a8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-06soc/amd/picasso/root_complex: add missing set_resourcesFelix Held
The set_resources field in the root_complex_operations struct shouldn't be NULL, but a pointer to noop_set_resources instead. This fixes the error "PCI: 00:00.0 missing set_resources". Change-Id: I2d9f3850b3051c92cd9c0f52f8570f4fd6133070 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-06soc/amd/common/block/gpio_banks: fix sequence in gpio_outputFelix Held
When configuring a GPIO pin as output the value should be written before it gets configures as an output to avoid a possible glitch on the output when the GPIO pin was an input before and the output value was different from the one that got written afterwards. Change-Id: I2bb5e629ef0ed2daadc903ecc1852200fe3a5cb9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06soc/amd/common/block/gpio_banks: clear output enable in gpio_input_*Felix Held
The functions to configure a GPIO as input with pull-up/down need to clear the output enable bit, so that the direction will be input. If the pin was configured as output before, the pin direction was still output after this call which is at least unexpected. Change-Id: Id1fa1669195080b34fd62324616825415728b0b4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06soc/amd/common/block/gpio_banks: clear pull-up/down bits in gpio_inputFelix Held
If the pin was configured as pull-up/down before this wouldn't get cleared when calling gpio_input before. Change-Id: I17d5eccb7492138e64abaecbd7cb853adb8c4d2d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-06cpu/intel/model_206ax: Simplify C-state acpigenAngel Pons
Since there's only one set of values, the if-clause is unnecessary. Change-Id: I2fb4582377fe2f204d2cee0dc513a4d5d24feabe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-06cpu/intel/model_206ax: Rename `cX_acpower` optionsAngel Pons
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Unify ACPI C-state optionsAngel Pons
All mainboards use the same values for AC and battery, even desktop boards without a battery. Use the AC values everywhere and drop the battery values. Subsequent commits will rename the AC power options accordingly, and will also clean up the corresponding acpigen code. This is intentional so as to ease reviewing the devicetree changes. Also update util/autoport accordingly. Change-Id: I581dc9b733d1f3006a4dc81d8a2fec255d2a0a0f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-06cpu/intel/x/chip.h: Drop unused `disable_acpi` settingAngel Pons
It is not used anywhere. Drop it. Change-Id: I92a72a46db237cf855491a664cdfadca34306f6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49087 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06nb/intel/sandybridge: Use consistent comment styleAngel Pons
Change-Id: Iacb1fb0a1309c3c23e670fee540514b6f546314a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-06nb/intel/sandybridge: Define and use `QCLK_PI` constantAngel Pons
To allow adjusting the phase shift of the various I/O signals, the memory controller contains several PIs (Phase Interpolators). These devices subdivide a QCLK (quarter of a clock cycle) in 64 `ticks`, and the desired phase shift is specified in a register. For shifts larger than one QCLK, there are `logic delay` registers, which allow shifting a whole number of QCLKs in addition to the PI phase shift. The number of PI ticks in a QCLK is often used in raminit calculations. Define the `QCLK_PI` macro and use it in place of magic numbers. In addition, add macros for other commonly-used values that use `QCLK_PI` to avoid unnecessarily repeating `2 * QCLK_PI`, such as `CCC_MAX_PI`. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: Id6ba32eb1278ef71cecb7e63bd8a95d17430ae54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-01-06util/testing: Build test more of our toolsPatrick Georgi
https://qa.coreboot.org/job/untested-coreboot-files reports a bunch of untouched Makefiles, so we never even attempt to build those tools. Change-Id: I70ca658d9642b84fa8388c72ecb83327a6a74291 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-06soc/intel/alderlake: Update CPU microcode patch base address/sizeSubrata Banik
This patch updates CPU microcode patch base address/size to FSP-S UPD to have second microcode patch loaded successfully to enable Mcheck flow. This is new feature requirement for ADL as per new Mcheck initialization flow. BUG=b:176551651 TEST=Able to reach beyond PC6 without any MCE. Change-Id: I936816e3173dbcdf82b2b16b465f6b4ed5d90335 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48847 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-05mb/google/zork: enable wake on MKBP eventsPeter Marheine
The EC generates EC_MKBP_EVENT_DP_ALT_MODE_ENTERED when USB-C connections enter DP alt mode, which should wake the system from S3. Configure S3 wake events to include MKBP so this actually wakes the system. BUG=b:174121852 BRANCH=zork TEST=Generating DP event on MKBP via EC console wakes morphius Change-Id: I8100c6253e8e5cae91586c4f2f45d66c15fecc6d Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-05nb/intel/haswell/memmap.h: Clean upAngel Pons
Drop unused definition and remove outdated comments. Change-Id: I16033b558fe4c01a9394382dc0c9d0bdc66193d9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-01-05mb/google/zork: Add INT[E-H] to FCH PIRRaul E Rangel
INT[E-H] are required because the GNB IO-APIC maps the 32 interrupts onto the 8 INT[A-H] that feed into the FCH PIC/IO-APIC. BUG=b:170595019 TEST=Verify ezkinil still boots Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9c6689e212b136f6f3c64152803ed161b2284275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-05mb/google/volteer/var/voema: Enable IPU for voemaDavid Wu
Enable IPU for voema for MIPI camera. BUG=b:169551066 TEST=IPU is enabled and shows in lspci. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I34736bffd4dc61a840003afe5afd6a9c8dc32e62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49002 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-05mb/clevo/cml-u: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I1f5b6f535597149f28dd8c8322acc2e988f11505 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-05mb/clevo/kbl-u: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I1f07b5851ece6d0943faa9c90fc518805880a27d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49060 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Daniel Maslowski <info@orangecms.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-05mb/siemens/chili: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built chili/base with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I5e2a09db80232457b2f78ad9b100c468d281f753 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-05mb/kontron/bsl6: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built kontron/boxer26 with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I08bd68aa2f98f93b8c5daf1ab2f3c1bbce521c53 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-05mb/kontron/mal10: Remove unnecessary includesFelix Singer
Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: Ibc6833d9256800d0e50651cac18a4e81ddbe6895 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48144 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04mb/kontron/mal10: Move include directories to mb levelFelix Singer
Move include directories from carriers and variants to mainboard level being able to reuse them later. Also, rename guards so that they fit their usage. Built with BUILD_TIMELESS=1, coreboot.rom remains the same. Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I55af05cb84b97d567ce1fc3b6151c34d1eda183f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48142 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04mb/purism/librem_cnl: Fix HDA verb NID count for Librem MiniMatt DeVillier
Fix off-by-1 count of NID entries. Change-Id: I65f70d084022c99233144b460542a793eae2acf3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04ACPI: Final APM_CNT_GNVS_UPDATE cleanupKyösti Mälkki
All platforms moved to initialise GNVS at the time of SMM module loading. Change-Id: I31b5652a946b0d9bd1909ff8bde53b43e06e2cd9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48699 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04arch/x86: Pass GNVS as parameter to SMM moduleKyösti Mälkki
Change-Id: I9d7417462830443f9c96273d2cc326cbcc3b17dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04mb/google/hatch (baseboard): add ACPI backlight supportMatt DeVillier
Add ACPI backlight support for boards selecting BOARD_GOOGLE_BASEBOARD_HATCH. PUFF-based variants do not have an internal panel, so do not need this. Test: build/boot Windows 10 20H2 on google/akemi, verify display backlight controls functional. Change-Id: I5ce4c6e1c78299e89760a1356da452d56ba0aee6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49058 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04mb/google/reef (and variants): add ACPI backlight supportMatt DeVillier
Enables backlight control under Windows 10. Test: build/boot Windows 10 20H2 on google/reef, verify display backlight controls functional. Change-Id: I4ce613badbdcfb9c843f52408df26c6cbb4b82a2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-04mb/razer/blade_stealth_kbl: 3/3 Convert field macros to PAD_CFGMaxim Polyakov
Converts bit field macros to target PAD_CFG_*() macros. To do this, the following command was used: ./intelp2m -n -t 1 -file ../../src/mainboard/razer/blade_stealth_kbl/ gpio.h This is part of the patch set "mb/razer/blade_stealth_kbl/gpio: Rewrite pad config using intelp2m": CB:43857 - 1/3 Decode raw register values CB:43858 - 2/3 Exclude fields for PAD_CFG CB:43411 - 3/3 Convert field macros to PAD_CFG Tested with BUILD_TIMELESS=1, Razer Blade Stealth, remains identical. Change-Id: Ie9da1246b784578c1e29acc5c61a918841de7468 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-04MAINTAINERS: Add maintainer for ACPILijian Zhao
Change-Id: I65fdee350273c58e027a002dba1f97a56115e195 Signed-off-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48970 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04drivers/vpd: Add support to read device serial from VPDMatt DeVillier
Add functions to read the system and mainboard serial numbers from VPD tables stored in flash. Remove board-specific implementations for google/drallion and google/sarien and select the new Kconfig instead. Test: build/boot google/akemi with RO_VPD region persisted from stock Google firmware, verify system/mainboard serial numbers present via dmidecode. Change-Id: I14ae07cd8b764e1e22d58577c7cc697ca1496bd5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49050 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04drivers/vpd: Add VPD region to default FMAP when selectedMatt DeVillier
Currently, use of the VPD driver to read VPD tables from flash requires the use of a custom FMAP with one or more VPD regions. Extend this funtionality to boards using the default FMAP by creating a dedicated VPD region when the driver is selected. Test: build qemu target with CONFIG_VPD selected, verify entry added to build/fmap.fmd. Change-Id: Ie9e3c7cf11a6337a43223a6037632a4d9c84d988 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-04soc/intel/baytrail/southcluster.asl: Use consistent comment formattingMatt DeVillier
Change-Id: I479e1eb5819c42621e8b17367b964124d5433378 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-04soc/intel/baytrail: add LPEA resources to southcluster.aslMatt DeVillier
The LPEA device memory resources, required by Windows drivers, were not being set. Allocate required resources using soc/intel/braswell/acpi/southcluster.asl as a reference. This patch alone is not sufficient for working audio under Windows on Baytrail ChromeOS devices, but it is a necessary component. Test: boot Windows 10 on google/swanky, observe LPEA device working properly. Change-Id: I7994d9b2c6e134c01b05cd7c61d309b6ba6e88e5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48745 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04arch/x86: Move .id section higherKyösti Mälkki
The (now removed) ID_SECTION_OFFSET=0x80 was actually the secondary address flashrom and FILO are looking for. The primary was 0x10, just below .reset. If .id does not collide with .fit_pointer, use the higher of the two locations. Change-Id: I0d3a58c82efd3bbf94f4bc80ec5bbc97d5b1c109 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48499 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04security/intel/txt/ramstage.c: Fix clearing secrets on CBNTArthur Heymans
intel_txt_memory_has_secret() checks for ESTS.TXT_ESTS_WAKE_ERROR_STS || E2STS.TXT_E2STS_SECRET_STS and it looks like with CBNT the E2STS bit can be set without the ESTS bit. Change-Id: Iff4436501b84f5c209add845b3cd3a62782d17e6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47934 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-04util: Make sure all util dirs have description files at top levelMartin Roth
New util directories have been added with no description.md file. The description file for supermicro was added at a secondary level, which doesn't help a user find the util since no path was added. Move it up to the top level. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I40b4c25dd7706513e96c6b8078a34160f8bb901e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
2021-01-04nb/intel/sandybridge: Replace memset with initializerAngel Pons
There's no need to use `memset` here. Change-Id: I0478bc3ff25b75bf0b554aa83ead6a63fcbd975c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 09:31:03 +0000