| Age | Commit message (Collapse) | Author |
|---|
|
In order to do a verification of romstage on x86 one needs to
run verstage which verifies romstage (and the memory init code).
However, x86 doesn't have SRAM like every other modern SoC so
managing the cache-as-ram region is especially critical.
First move all of the "shared" objects to the beginning of
the .car.data section. This change then ensures that each stage
using car.ld to link has the same consistent view of the addresses
of these fixed-sized objects in cache-as-ram. The CAR_GLOBALs can
be unique per stage. However, these variables are expected to have
a value of zero at the start of each stage. In order to allow a
stage to provide those semantics outside of the initial cache-as-arm
setup routine add _car_global_start and _car_global_end symbols.
Those symbols can be used to clear the CAR_GLOBALs for that stage.
Note that the timestamp region can't be moved out similarly to the
pre-ram cbmem console because the object storage of the timestamp
cache is used *after* cache-as-ram is torn down to indicate if the
cache should be used or not. Therefore, that timestamp needs to
migrated to ram. A logic change in src/lib/timestamp.c could
alleviate this requirement, but that task wasn't tackled in this
patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I15e9f6b0c632ee5a2369da0709535d6cb0d94f61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11740
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to support verstage on x86 one needs to link verstage
like romstage since it needs all the cache-as-ram goodies. Therefore,
provide a macro that one can invoke that provides the necessary
recipes for linking that particular stage in such an environment.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I12f4872df09fff6715829de68fc374e230350c2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11739
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This moves a few vboot-prefixed functions that were defined in chromeos.c to
vboot_common.c, since those are only relevant to vboot and depend on the vboot
handoff data. This allows more separation between CONFIG_CHROMEOS and what
CONFIG_CHROMEOS selects, so that each separate option (such as
CONFIG_VBOOT_VERIFY_FIRMWARE) can be enabled separately.
Thus, the actual definitions of these functions will only be declared when
CONFIG_VBOOT_VERIFY_FIRMWARE is set, so the check before calling
vboot_skip_display_init in bootmode was also adapted.
Change-Id: I52f8a408645566dac0a2100e819c8ed5d3d88ea5
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11497
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Avoid specifying the size of the microcode in microcode_size.h.
Instead, the size will be determined during build time and
microcode_size.h will be generated. This way, the size does
not need to be adjusted by hand.
Change-Id: I868f02b0cc03af12464a6a87c59761c200eb2502
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11709
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Use the common ME and descriptor code.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados
Change-Id: I7196f587b92fd26129b30e2cd73f4caf5f4ebef8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11735
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of selecting the Kconfig option and adding the subdir
entry within each chipset auto include the common/firmware
directory as it's guarded by HAVE_INTEL_FIRMWARE.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados.
Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11734
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I2071586e1f3b4464464928c11475f9283084dbcd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11693
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The output of command below,
# i386-elf-nm build/cbfs/fallback/romstage_null.offenders | \
grep -q "" ; echo $?
has different result on MacOS, OS X Mavericks, which outputs 0.
On linux, it outputs 1.
I assume it is misleading to search an empty string in a empty
string. Change it to testing if the string is empty.
Change-Id: Ie4b8fe1fb26df092e2985937251a49feadc61eb0
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11600
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
1. The build folders are capitalized.
2. Add folders for build LLVM and IASL.
Change-Id: I6c752f08aa545d8878fddd373e5acbfade317ad5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11602
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Up to now, if both fmap and a master header existed, the master header
was used. Now, use the master header only if no fmap is found.
Change-Id: Iafbf2c9dc325597e23a9780b495549b5d912e9ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11629
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On x86, the bootblock can (and will) become part of the regular file
system, so there's no distinct fixed-size region for the bootblock
there.
Change-Id: Ie139215b73e01027bc0586701361e9a0afa9150e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11691
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This fixes building with CONFIG_COVERAGE=y
Change-Id: I5128ae0ef0d4f71e3ede7bcb3ee7ed7e265d1bb7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11729
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There appears to be an issue that is causing this particular bit of
ACPI code to be incorrectly interpreted by the kernel and the IASL
disassembler.
Ensuring the PCRB() method is defined in the DSDT before any uses of
it appears to fix the problem, but that relies on specific ordering
of the ASL files included by pch.asl and may break again in the future
if the includes were re-ordered. (they are alphabetic now)
So in this case to work around the issue unroll the function call so
the admittedly messy calculation is reduced to a constant when compiled.
Note this issue was observed with both iasl-20130117 and
iasl-20150717.
ACPICA bug: https://bugs.acpica.org/show_bug.cgi?id=1201
BUG=chrome-os-partner:45760
BRANCH=none
TEST=verify disassembled AML is correct
Change-Id: I7b6a3b792f79755db0ea7b9f2ef6ee7f5000e018
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ecacc340d6e1068ea649f0859657bb3208695730
Original-Change-Id: I232523f5b6ce290da6e7d99405a53b9437b10e0d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11721
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:41280
BRANCH=none
TEST=Audio jack insert/eject detection and headset buttons work
on glados with the nau8825 driver in chromeos-3.18 and the
staging kernel skl2.
Change-Id: I813a985b4a39249a2cdbe45117acbdb7710bfa29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7a5b3dafd407fea2376dff5c3dcde50dff4704fb
Original-Change-Id: Ic24a0c444761d0f3a35c268078e70d9aacca4c80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293610
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11720
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the CTDP support code that is in ACPI. It has been ported
from haswell and while the MCHBAR register interface does seem to
still exist the calculations for determining PL2 is no longer
straightforward.
Additionally nothing is using this interface and the expectation
is that DPTF will be used for throttling with PL[1234] and having
ACPI interfere with the configuration would not be good.
BUG=chrome-os-partner:44622
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I81e356ddf564a5253458b82bc3327bfb573ab16d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 884ee9a764bad0b3b4bcaeb5a3f46c5f090a116c
Original-Change-Id: I284ab52a305cee25c88df5228b01ff1e9544efe3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302166
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11719
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the typo of _DDR to be _DDN.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build kunimitsu with iasl-20150717
Change-Id: I1e7c20d450ea897bfd24506d10a5f466b03610e4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f136581b653bfb63aac24065c8837307e3fc5432
Original-Change-Id: I3358e6d3d05bcfc291199e8ef12ff92c66f5b74f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302165
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11718
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix the typo of _DDR to be _DDN.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I8d61a6653c3109890d04e54f0d694703b9c9f2bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d4a2b2583bdbf9afd7b306359338d4c49bbb44ad
Original-Change-Id: I7b7905a217d34a8a78b8280c898f1074ecbe3cf6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302164
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11717
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Recent version of iasl are flagging more things as warnings.
Remove unused Local0 uses and make _CRS method serialized to
fix these warnings.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I1d4535205426dd9a6346f53ff159221cf5cd899a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8b43f8f24bb7cb33ad0411c24616da66663c2e3e
Original-Change-Id: I71eafd91d30d5f50e6211368f0bbc517c8085892
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302163
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since the TPM _CRS method creates named objects it needs
to be serialized to prevent a warning in recent iasl.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build glados with iasl-20150717
Change-Id: I59a52552ab24b7d9c9928331aa8c8d19f54fd1b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a5c474c94980661573a99eb94d5f661f2d0114b
Original-Change-Id: Ie9d164ea8781304dd0bf1833d182d7c601b8e18d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302162
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change allows files added to cbfs-files-y to specify compression
algorithm.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I29ba0c6f8290b500072a0b17460ee590d6bb6efa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4284160bdbbc54ed1da8b5477b02ee315061206b
Original-Change-Id: Idf81e1cc0a1030449da632f6d89cdc87c624f9f3
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302132
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11714
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=none
BRANCH=tot
TEST=built for Samus with debugging enabled
Change-Id: I0b555d018f8c2eb1b51519a6227298c8d5d58a42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5908e4b8ffc66e6ecc7cae78cf10055fbd727c81
Original-Change-Id: Ifd049111fee540789dabb1d7653568b80405b77d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302131
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11713
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to wake from S0ix the kernel needs to know that the
keyboard interrupt is wake capable. Using IRQNoFlags does not
allow the wake capability to be reported.
For normal S3 this does not matter as the EC is the one handling
the keyboard wake event. For S0ix the EC does not need to be
involved in this particular wake event.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=echo freeze > /sys/power/state and wake from keyboard
Change-Id: I7175d2ea98f8a671765897de295df7b933151fc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 645f1cd96c35f42aa7c40ff473b15feb619b0373
Original-Change-Id: Ia89c30c51be9db7b814b81261463d938885325fd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/301441
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11712
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
$(src) is not defined when building directly from the cbfs directory (that is,
when building cbfs as standalone, running make in the cbfs directory), so we
need to define the path to the commonlib include path relative to $(top).
Change-Id: I72e80b030d4a156ec653ded5ab1457b16f612526
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11706
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
While the romstage code flow is not consistent across all
mainboards/chipsets there is only one way of running ramstage
from romstage -- run_ramstage(). Move the
timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. TS_END_ROMSTAGE still present in
timestamp table.
Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This removes the dependency on chromeos and vboot for the sw write protect state
function: vboot_get_sw_write_protect, renamed to get_sw_write_protect_state to
both reflect this change and become consistent with the definition of
get_write_protect_state that is already in use.
Change-Id: I47ce31530a03f6749e0f370e5d868466318b3bb6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When building for ChromeOS, it is expected that Coreboot will only occupy the
first MiB of the SPI flash, according to the veyron fmap description.
Otherwise, it makes sense to use the full ROM size.
Change-Id: I168386a5011222866654a496d8d054faff7a9406
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11117
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Unlike the other stages, the payload requires virtual memory to be set up
and also a privelege level change.
Change-Id: Ibbe2a55f7719d917f121a53a17c6d90e6b2ab3d1
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/11699
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Currently coreboot expects the loader to clear the bss section
for all stages. i.e. stages don't clear their own bss. On ARM
SoCs the BootROM would be responsible for this. To do that
one needs to include the bss section data (all zeros) in the
bootblock.bin file. This was previously being attempted by
keeping the .bss info in the .data section because objcopy
happened zero out non-file allocated data section data.
Instead go back to linking bootblock with the bss section
but mark the bss section as loadable allocatable data. That
way it will be included in the binary properly when objcopy
-O binary is emplyed. Also do the same for the data section
in the case of no non-zero object values are in the data
section.
Without this change the trick of including .bss in .data
was not working when there wasn't a non-zero value object
in the data section.
BUG=None
BRANCH=None
TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains
the cleared bss.
Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This commit adds read/write functions for both big and
little endian interpretations. Additionally there are
variants that allow an offset to be provided into the
source buffer.
BUG=None
TEST=Wrote test harness for functions. Also booted ARM QEMU
through end of payload.
Change-Id: If44c4d489f0dab86a73b73580c039e364c7e517d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11677
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Instead of reaching into src/include and re-writing code
allow for cleaner code sharing within coreboot and its
utilities. The additional thing needed at this point is
for the utilities to provide a printk() declaration within
a <console/console.h> file. That way code which uses printk()
can than be mapped properly to verbosity of utility parameters.
Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11592
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
endian.h lives in under sys on the BSDs. Replace htole32() with
swab32(htonl(..)) as a proxy for little endian operations.
Change-Id: I84a88f6882b6c8f14fb089e4b629e916386afe4d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11695
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Since fmap doesn't come with a checksum, we resort to a number of
heuristics to determine if a given location hosts an fmap (instead of
another data structure that happens to store the fmap magic string at
the right location).
The version test is particularly effective against strings containing
the magic (which either terminate with 0, or have some other ASCII data,
but rarely a '\001' byte inside the string).
Change-Id: Ic66eb0015c7ffdfe25e0054b7838445b8ba098e9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11690
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The command adds a new cbfs file, fills in the CBFS meta data in cbfs
master header format, then points the master header pointer (which
resides at the last 4 bytes of the CBFS region) to the data area of the
new file.
This can leak some space in CBFS if an old-style CBFS with native master
header gets the treatment, because a new header is created and pointed
at. flashmap based images have no such header, and the attempt to create
a second file with the (hardcoded) name will fail.
Change-Id: I5bc7fbcb5962b35a95261f30f0c93008e760680d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11628
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is more in line with how fmd/fmap specify ranges.
Change-Id: Iecf8250e84d6eb267711ded446909b21147f1a9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Let's move x86 style bootblocks (and later the others) and the master header
into the CBFS structure. Prepare for this by adding file types.
Change-Id: I1b4149c7f3b8564ee358a2c18ba91e6a7a6797da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11627
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
cbfs_file_find_attr(file, tag) finds the first attribute of file with
the given tag.
Change-Id: I78ee3b996b4b086605244c5d7d57ef7e3fc1db47
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11678
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
fileno() is a mess on some operating systems. Don't
deliberately convert between FILE * and file handles.
Change-Id: I5be62a731f928333ea2e5843d81f541453fdb396
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/11636
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Decompression is handled transparently within cbfs_get_file_content:
const char *name = "foo.bmp";
void *dst = cbfs_get_file_content(media, name, type, NULL);
To keep things consistent, a couple of API changes were necessary:
- cbfs_get_file_content always returns a copy of the data, even for
uncompressed files. It's the callers responsibility to free the
memory.
- same for cbfs_load_payload and cbfs_find_file.
- cbfs_load_optionrom doesn't take a "dest" argument anymore but always
returns a copy of the data, for compressed and uncompressed files.
Like with cbfs_get_file_content, the caller is responsible to free it.
It also decompresses based on extended file attributes instead of the
cbfs_optionrom subheader that libpayload specified but that (AFAIK)
nobody ever used, given that there's not even tooling for that.
Change-Id: If959e3dff9b93c6ae45ec7358afcc7840bc17218
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10938
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The dynamically sized region after struct cbfs_file doesn't contain only
the file name anymore.
Change-Id: I3241cb2f0cbec3fcf4d3c27d638e2847e43f4761
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11676
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This comes from cbfstool (GPL) into libpayload (BSD-l), but I could have
just as well written it in libpayload first.
Change-Id: I86baefe5c299125a4733fa20523efd5d06de7182
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11675
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the common ACPI _SWS code and provide a function to fill out
the wake source data.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-samus coreboot
Change-Id: I3d2ceca8585314122b78317acb7f848efb6e9a14
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d8afaee8e27222639c5e249d53be28cddcb78f72
Original-Change-Id: Ie551ecf3397c304216046cc2046c071f7b766e5f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298168
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11647
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Switch braswell to use the common code for filling out the NVS
data used by ACPI _SWS methods. This code was out of date on
braswell so also update it to provide the \_GPE.SWS method.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-cyan coreboot
Change-Id: I41c2a141c15f78dc0d9482954c157f81bd0759fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c4d1ee76f337addf687ca5a9ae2da5e898c2de0
Original-Change-Id: I44424784d5d3afb06d0d58c651a9339c7b77418c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298230
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11649
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable and use the common code for filling out the NVS data used
by the _SWS methods. Add a function to provide the wake source
data. With Deep S3 enabled skylake does not retain the contents
of the PM1_EN register so instead just select the wake related
events in PM1_STS.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=tested on glados by checking for valid _SWS string in
/sys/firmware/log after suspend/resume. Wake sources that were
tested are RTC, power button, keypress, trackpad, and wifi.
Change-Id: I93a4f740f2e2ef1c34e948db1d8e273332296921
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cb4d4705b87ef7169f1979009c34a58de93c4ef0
Original-Change-Id: Ib6b4df09ea3090894f09290d00dcdc5aebc3eabb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298169
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11648
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a follow-up patch to
https://chromium-review.googlesource.com/#/c/286877, after fsp support
is landed in v1.5.
BUG=chrome-os-partner:42975
BRANCH=none
TEST=execute "mosys memory spd print all" on glados and kunimitsu
Change-Id: I949e287372b190affac36a0efde8a30402eecdc8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 71a2e1838ff8bbaa358c167dad905b63d23c43fa
Original-Change-Id: I64103af4f8456a053a955845a067062122f47af3
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298967
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Assign GPE DW0 to GPP_B block
- Enable GPP_B16 as ACPI_SCI for wake
- Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW
Note that current designs cannot wake from Deep S3 via wifi.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I1fe15a5a9b3d868a0e4f1bfb102b69f024c3aa48
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de9dfee840246866a8dcca2e1c42c0292e820529
Original-Change-Id: I926d74b6bcf6d64c3db61ed23d7c17b51a98b052
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298232
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11651
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Assign GPE DW0 to GPP_B block
- Enable GPP_B16 as ACPI_SCI for wake
- Define PCIe WLAN device in ACPI with GPE0_DW0_16 for _PRW
Note that current designs cannot wake from Deep S3 via wifi.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=tested on glados:
1-disable deep s3 in devicetree.cb
2-enable magic packet with "iw phy phy0 wowlan enable magic-packet"
3-powerd_dbus_suspend to go to S3
4-wake system with magic packet
Change-Id: I989768615e9da8ecf6354852d2db7aae8069aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 894354c5bfd499b911b7f89310c48b503dbaadc2
Original-Change-Id: I9a7a317fc2eccc70fdb4862843de1a654fbc2eee
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11650
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The values are taken from latest BWG as well fsp src.
BRANCH=none
BUG=chrome-os-partner:45208
TEST=Built and boot on kunimitsu
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Change-Id: Ia6bd336a71b0313801b59990c78822fa0d789e36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c955ab43245153d76932daa527f1b5ebea859164
Original-Change-Id: I3f7307951753c2bbe6319f627a82a93359c4e61b
Original-Reviewed-on: https://chromium-review.googlesource.com/299480
Original-Commit-Ready: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order for easier consumption in userland tools split the
FSP 1.1 relocation logic into a single file w/ an aptly named
function name.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I49998b8621611c638375bc90884e80d0cd3bdf78
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc898e1c528df60683575d553d6194a1e8200afa
Original-Change-Id: I736c0059d43f6d0be4fdb6e6f47cdb5c189a7ae8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298833
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11665
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
UEFI defines everything as little endian. Additionally the
EDK II header files assume they are used on machines
which are running UEFI -- thus little endian. This patch
attempts to fix up all the possible endian violations
when running on a big endian machine. This is for
in preparation of using the FSP 1.1 code in userland
for relocating FSP images.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I39f4de84688e48978a4650303b8af8345f44fd03
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c7eab9b7c10765355feffa3c3cac403275f9479
Original-Change-Id: I33a7661281307cf31ae33899d1a4eb6a2fbd01a1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298832
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11664
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to integrate fsp 1.1 relocation with cbfstool one
needs to be able to supply the address to relocate the FSP
image. Therefore, allow this by returning offset for return
values. Note that exposed API has not changed.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Confirmed relocation values matched.
Change-Id: I650a08ffb9caf7e0438a988cae9bec56dd31753c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 53870b0df809418e9a09e7d380ad2399a09fb4fb
Original-Change-Id: Ic2ec63681ed4e652e2624b40e132f95d1e5a0887
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298831
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11663
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If the device has already been disconnected then we shouldn't enable
host channel to start any transfer, otherwise this channel goes into
an odd state the channel is enabled but can not be disabled by set
hcchar.chdis=1. So we need check the device connect status before
enable channel.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=None
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae3e690b2cd4a9ea8b5766ac873b0e00bf3a23de
Original-Change-Id: Ib3ecf486649ca11b302144f9c00a5e88424e90fa
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298402
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit ea96f947b5304fdde2e0991d23febaeba209dde1)
Original-Reviewed-on: https://chromium-review.googlesource.com/299398
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Idf48ffbc4c2794900e09dec6b2e34e33b21f87b4
Reviewed-on: http://review.coreboot.org/11662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When disconnect is detected in dwc2_split_transfer() the split
configuration registers should be cleared before return.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=On Jerry, usb hot plug works with devices behind hubs
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37594d8b4490b6d393d19d17d8e497db7de8817d
Original-Change-Id: Ie1eecec067305874513c6ceb95df4240dc393cd6
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295625
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d543e14cdc73bd549dd553c8d1d07672a1307981)
Original-Reviewed-on: https://chromium-review.googlesource.com/299700
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4604097743f2f9d763b29ee27f3bc1788a85a62
Reviewed-on: http://review.coreboot.org/11661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Patch b2a62622b (linking: move romstage and bootblock to use program.ld)
unified the linker scripts between different stages. Unfortunately it
omitted several special cases from the old bootblock.ld script that are
required for non-x86 environments.
This patch expands program.ld to once again merge the .BSS into the
program image for bootblocks (ensuring correct initialization by the
external loader). It also revives the .id section (which adds a
human-readable blurb of information to the top of an image) and fixes a
problem with unintended automated section alignment.
BRANCH=None
BUG=None
TEST=Jerry and Oak boot again.
Change-Id: I54271b8b59a9c773d858d676cde0218cb7f20e74
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6fddbc00963e363039634fa31a9b66254b6cf18f
Original-Change-Id: I4d748056f1ab29a8e730f861879982bdf4c33eab
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/299413
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
flmstr register bits have slightly different meaning for IFD v2.
BUG=chrome-os-partner:45091, chrome-os-partner:43461
TEST=Run `ifdtool -d image.bin` on IFD v1 locked squawks image:
Found Master Section
FLMSTR1: 0x0a0b0000 (Host CPU/BIOS)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: enabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: enabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR2: 0x0c0d0000 (Intel ME)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: enabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: enabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: enabled
Requester ID: 0x0000
FLMSTR3: 0x08080118 (GbE)
Platform Data Region Write Access: disabled
GbE Region Write Access: enabled
Intel ME Region Write Access: disabled
Host CPU/BIOS Region Write Access: disabled
Flash Descriptor Write Access: disabled
Platform Data Region Read Access: disabled
GbE Region Read Access: enabled
Intel ME Region Read Access: disabled
Host CPU/BIOS Region Read Access: disabled
Flash Descriptor Read Access: disabled
Requester ID: 0x0118
Then, run `ifdtool -l image.bin` and verify newly locked image is identical.
Next, run `ifdtool -l image.bin` on unlocked glados image. Verify that locked
and unlocked regions are identical to above.
Finally, burn glados image, run `flashrom -V`, and verify ME regions is
locked and descriptor region is RO.
BRANCH=None
Change-Id: I8a65bdc5edd0d888138b88c1189f8badd1404b64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11c434835a66a50ab2c0c01a084edc96cbe052da
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I875dfce6f5cf57831714702872bfe636f8f953f4
Original-Reviewed-on: https://chromium-review.googlesource.com/298968
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In LP0 resume, a couple of SDMMCx pad settings need to be set to 0 to
reduce power leakage.
BUG=None
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume >100 times
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f35a90a8af2180443db2c4be75d4566d0990de5
Original-Change-Id: Ifc946b0cea437ef0807cea0c11609d8e09387e8e
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298195
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Joseph Lo <josephl@nvidia.com>
Original-(cherry picked from commit be3ac49a6bc4c9088d3799555d69c87c8ce1693c)
Original-Reviewed-on: https://chromium-review.googlesource.com/298154
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: If5d5cebc89b8220480b3c72293a410e782eb437e
Reviewed-on: http://review.coreboot.org/11656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
FSP should not lock CMOS unconditionally. coreboot sends Silicon
UPD parameter "RtcLock" to FSP to take action on CMOS
region locking/un-locking. This patch has CB generic code for
creating the Silicon UPD paramater.
BUG=chrome-os-partner:44484
BRANCH=none
TEST=Build and booted in kunimitsu, tested using below command-
When DIsabled RtcLock from devicetree in coreboot, booted to kernel
and run following commands -
>> crossystem fw_result=success
>> crossystem | grep fw_result
It should reflect the value that is set. Here, success.
If ENabled RtcLock from Coreboot devicetree, The same commands will
fail to update the fw_result status from crossystem utility.
CQ-DEPEND=CL:*229144
Change-Id: I7f63332097cdaf6eedefbc84bec69ce4e9cc59d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7b8293a2c55117d7ca2001ac9ec0de24d35b80b
Original-Change-Id: If708e2c782644dcf7f03785d1bfa235ef5385d80
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297980
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11655
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Currently, erase operation only works if the region is sector-aligned.
These asserts ensure we can erase the region when it's all used up.
Erase operation can be updated to handle unaligned erases by read,
update, write-back cycle. However, these asserts will still remain useful
in case the adjacent region contains critical data and mis-updating it
can cause a critical failure.
Additionaly we should write a FAFT test but it's more reliable to catch
it here since FAFT can fail in many ways.
BUG=none
BRANCH=master
TEST=tested on samus using misaligned nvram region
Change-Id: I3add4671ed354d9763e21bf96616c8aeca0cb777
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fc001a4d3446cf96b76367dde492c3453aa948c6
Original-Change-Id: Ib4df8f620bf7531b345364fa4c3e274aba09f677
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297801
Reviewed-on: http://review.coreboot.org/11654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The EC doesn't support these commands so sending them is
not working. We have had a default policy of wake on USB
for a long time now and this runtime config isn't really
needed any longer.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I547d92b4e852664567792060bf1f7b60976bb9a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a929eb9ec422e145006505ea4d5fbd1ef3950be
Original-Change-Id: I01e80de65e6e1cdcabb24edb43bc671f5a8aa437
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298234
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The EC doesn't support these commands so sending them is
not working. We have had a default policy of wake on USB
for a long time now and this runtime config isn't really
needed any longer.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Ib789ae3a7ba56a11dfb5918cb40bfa2f044d1dc3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ed7391942afed94bfc7ad04880d4c2b865e5655
Original-Change-Id: I6fe10952f32673a447001b832ac6c6b04b22aef0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298233
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add common code for filling out the NVS fields that are used by
the ACPI _SWS methods. The SOC must provide a function to fill
out the wake source data since the specific data inputs vary by
platform.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I4f3511adcc89a9be5d97a7442055c227a38c5f42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cee5fa176c16ca44712bce8f3c8045daa5f07339
Original-Change-Id: I16f446ef67777acb57223a84d38062be9f43fcb9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298167
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11646
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no need to maintain two lists of dependencies that need to be
changed every. single. time.
Change-Id: I26bb8c884e98afe74fd9df11464bcf88e130cd92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11674
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It was added to an unused variable.
Change-Id: I869ffdda7e04b5c615931473c760d66b803fb98b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If we use a linux payload/any payload that wants to manage virtual
memory, and the payload is a supervisor (thus requiring virtual
addressing before being started), we need to make sure that the page
table is mapped into the virtual address space. Move the start address
of the tables so the payload can manage virtual memory.
Change-Id: I1d99e46f38a38a163fb1c7c517b1abca80cde0dc
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11621
Tested-by: build bot (Jenkins)
|
|
Existing memlayout code placed sections in overlapping areas, and would
overwrite the payload if it was large enough. Update memlayout.ld in
src/mainboard/emulation/spike-riscv to represent the spike emulator, and
add sbi interface which now has room into src/arch/riscv/bootblock.S.
Add utility code to qemu-riscv, but emulator itself has yet to be
updated to new ISA and as such should not be used.
Update Makefile to include all the files necessary for sbi interface.
Clean up unused include in src/arch/riscv/include/atomic.h and
whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld
Fixed whitespace issues in spike_util.c
Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11370
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Kunimitsu has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=chrome-os-partner:43493
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I7998c19e5514eda781cc20888cdb0732f81389ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a67e5ddfccea0776841fabe04be55c1854bf31f2
Original-Change-Id: I381dc9c5777370df2ea4c41c9e153b3277082718
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298252
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11645
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Glados has an ambient light sensor connected to the EC which
is presented to the OS as a standard ACPI0008 device.
BUG=chrome-os-partner:43493
BRANCH=none
TEST=test ALS functionality on glados P2 board
Change-Id: I4a4913a1b407720d85f6e630b674e550bf5e36df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aee2b2446ca45039f1b4866feb83754861dba054
Original-Change-Id: I61f3f31ba077f63b36aa0cd9707e128e65c9ea7d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/298251
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11644
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch will reset Deep S3 flag, hence S3 will work.
BUG=chrome-os-partner:40635
BRANCH=None
TEST=Build and Boot Kunimitsu and verify S3 is working.
Change-Id: Iad87b7a8f7bf560861a270a8c19153cfc3850bc4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbfaa29041be49e4c39d19cb94f01ad10d12c7d5
Original-Change-Id: I5ae1738c5de1bee1ad9a45ebde074a6a378492af
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297903
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This switches the final 4 Intel platforms that use ME firmware from
using code specific to the platform to the common IFD Kconfig and
Makefile.
braswell, broadwell, bd82x6x (cougar point & panther point) and ibexpeak
Change-Id: Id3bec6dbe2e1a8a90f51d9378150dbb44258b596
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10876
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The locate command was previously being used for x86 romstage
linking as well as alignment handling of files. The add command
already supports alignment so there's no more users of the
locate command. Remove the command as well as the '-T' (top-aligned)
option.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi. Noted microcode being directly added.
Change-Id: I3b6647bd4cac04a113ab3592f345281fbcd681af
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Now that cbfstool supports XIP for romstage utilize it.
This removes the double link steps with the cbfstool
locate and add-stage sandwich.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I1ec555f523a94dd4b15fe8186cbe530520c622c0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11670
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of going through the locate then add-stage
dance while linking romstage twice allow for adding romstage
with --xip flags to perform the relocation while adding it
into CBFS. The -P (page-size) and -a (alignment) parameters
were added as well so one could specify the necessary
parameters for x86 romstage.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Change-Id: I585619886f257e35f00961a1574009a51c28ff2b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The cbfs_locate_entry() function had a hack in there which
assumed a struct cbfs_stage data was being added in addition
to the struct cbfs_file and name. Move that logic out to the
callers while still maintaining the logic for consistency.
The only impacted commands cbfs_add and cbfs_locate, but
those are using the default 'always adding struct cbfs_stage'
in addition to cbfs_file + name. Eventually those should be
removed when cbfs_locate is removed as cbfs_add has no smarts
related to the cbfs file type provided.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I2771116ea1ff439ea53b8886e1f33e0e637a79d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to allow cbfstool to add XIP romstage on x86 without
doing the 'cbfstool locate', relink, then 'cbfstool add' dance
expose the core logic and of rmodule including proving an optional
filter. The filter will be used for ignoring relocations to the
.car.global region.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I192ae2e2f2e727d3183d32fd3eef8b64aacd92f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11598
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The core logic of the rmodule parser is ideal for
processing romstage ELF files for XIP. To that
end start the work of exposing the logic from
rmodule so cbfstool can take advantage of it.
The properties that both need require:
- Single program segment
- Relocation information
- Filter relocation processing
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi.
Change-Id: I176d0ae0ae1933cdf6adac67d393ba676198861a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11595
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no need to whine about missing files, so test for them first.
Change-Id: I906fd04a315de70340ce76d7c38eaaf88cc6580a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11642
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We build the coreboot utilities in a separate step as a minor
optimization. When logging in junit format (for jenkins), we want to
have a report on those as well (instead of an xml error).
Change-Id: Ibcd3b02bce9a314c30b5f7414e9e4cf0149ffd6a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11641
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Variable expansion made abuild create board..foo/bar, which are annoying
on jenkins' web UI because it doesn't cope properly with the empty
namespace between the dots. make it create board.foo/bar or
board.$class.foo/bar.
Change-Id: Ifa79cbfd1f263e11a458b3cc320baeed6a3fbc98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is required the BLOB change Icb7a4f07
"AMD Merlin Falcon: Update to CarrizoPI 1.1.0.0 (Binary PI 1.4)"
This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the
boards can boot to Windows 8.1. PCIe slots, USB and NIC work.
Change-Id: Ibe141c16f8f9eac2adc5d5f45a1f354fb2a7f33c
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11148
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
This is required the BLOB change I67817dc59
AMD Steppe Eagle: Update to MullinsPI 1.0.0.A (Binary PI 1.1).
This is tested on Olive Hill Plus. The board can boot to Windows 7.
PCIe slot, USB and NIC work.
Change-Id: I605df26b61bdffabd74846206ad0b7bf677ebed1
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/11225
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Trap handling code was bugged in that it loaded in the wrong stack
pointer, overwriting the space the processor uses to talk to its host
for doing device requests. Fix this issue, as well as add support for
handling misaligned loads the same way we handle misaligned stores.
Change-Id: I68ba3a114b7167b3212bb0bed181a7595f0b97d8
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11620
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Recently qemu stopped doing a basic lapic setup and expects the
firmware to handle this properly (like on real hardware). So
let's do that so coreboot works properly on qemu 2.4+.
Here is the qemu commit message for the change:
<quote>
commit b8eb5512fd8a115f164edbbe897cdf8884920ccb
Author: Nadav Amit <namit@cs.technion.ac.il>
Date: Mon Apr 13 02:32:08 2015 +0300
target-i386: disable LINT0 after reset
Due to old Seabios bug, QEMU reenable LINT0 after reset. This bug is long gone
and therefore this hack is no longer needed. Since it violates the
specifications, it is removed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428881529-29459-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
</quote>
Change-Id: I022f3742475d3f3477fc838b1e2bce69287b6b8e
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/11611
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We had two mappings of filetype IDs to strings. We shouldn't.
Change-Id: I08e478b92f3316139f14294e50ede657c7d5fb01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11626
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commit 300caced9 introduced stack overflow when HAVE_ACPI_RESUME
is selected as the temporary storage for MTRRs is 4KiB.
Change-Id: I993df6abc04436fb135822729c4931c5c7496e5a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/11633
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change was sitting in my git index, and I
failed to push it in the original patch.
Change-Id: If6f49c3c2b7908f93a99c23a80536ad5937959c7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11622
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Id462a10c2affac54ec48a1cc2a5b2ca66112848e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Revive ffs() in a more fancy way (that is more likely to be accepted).
We dropped it in
7a8a4ab lib: Unify log2() and related functions
but there is at least one user: flashrom.
Change-Id: I4e3fc15816b778e640bceea0d89cd9624d271c2e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11591
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current endian API support in coreboot doesn't follow
any known API that can be shared in userland as well as coreboot
proper. To that end provide big and little endian helper functions
that can be used in code that can be shared within coreboot proper
and userland tools.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built rambi
Change-Id: I737facab0c849cb4b95756eefbf3ffd69e558b32
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11618
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP has some unique attributes which makes integration
cumbersome:
1. FSP header files do not include the types they need. Like
EDKII development it's expected types are provided by the
build system. Therefore, one needs to include the proper
files to avoid compilation issues.
2. An implementation of FSP for a chipset may use different
versions of the UEFI PI spec implementation. EDKII is a
proxy for all of UEFI specifications. In order to provide
flexibility one needs to binding a set of types and
structures from an UEFI PI implementation.
3. Each chipset FSP 1.1 implementation has a FspUpdVpd.h
file which defines it's own types. Commonality between
FSP chipset implementations are only named typedef
structs. The fields within are not consistent. And
because of FSP's insistence on typedefs it makes it
near impossible to forward declare structs.
The above 3 means one needs to include the correct UEFI
type bindings when working with FSP. The current
implementation had the SoC picking include paths in the
edk2 directory and using a bare <uefi_types.h> include.
Also, with the prior fsp_util.h implementation the SoC's
FSP FspUpdVpd.h header file was required since for providing
all the types at once (Generic FSP 1.1 and SoC types).
The binding has been changed in the following manner:
1. CONFIG_UEFI_2_4_BINDING option added which FSP 1.1
selects. No other bindings are currently available,
but this provides the policy.
2. Based on CONFIG_UEFI_2_4_BINDING the proper include
paths are added to the CPPFLAGS_common.
3. SoC Makefile.inc does not bind UEFI types nor does
it adjust CPPFLAGS_common in any way.
4. Provide a include/fsp directory under fsp1_1 and
expose src/drivers/intel/fsp1_1/include in the
include path. This split can allow a version 2,
for example, FSP to provide its own include files.
Yes, that means there needs to be consistency in
APIs, however that's not this patch.
5. Provide a way for code to differentiate the FSP spec
types (fsp/api.h) from the chipset FSP types
(fsp/soc_binding.h). This allows for code re-use that
doesn't need the chipset types to be defined such as
the FSP relocation code.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted on glados.
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Change-Id: I894165942cfe36936e186af5221efa810be8bb29
Reviewed-on: http://review.coreboot.org/11606
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
|
|
RISCV requires the bios/bootloader to set up an interface by which it
can get information about memory, talk to host devices, etc. Put
implementation for spike in
src/mainboard/emulation/spike-riscv/spike_util.c, and
src/arch/riscv/trap_handler.c
Change-Id: Ie1d5f361595e48fa6cc1fac25485ad623ecdc717
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11368
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Execution in supervisor level code in RISCV requires early setup of
virtual memory. Add initialization calls in
src/arch/riscv/virtual_memory.c to implement the required page table
setup, and helper functions to use when jumping to the payload correctly
in riscv.
Change-Id: I46e080e0ee8dc13277d567dcd4bf0f61a4507b76
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11369
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
... the configuration is handled further below in the file by virtue of
select DRIVERS_UART_8250MEM
Change-Id: Ie5481d23cd3ac3561958fd100bd05c0e4b03ce00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11612
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Move some remaining ACPI init code to the SOC instead of being
done in each mainboard:
- acpi_create_gnvs is now a local function
- add a weak acpi_mainboard_gnvs() that can be used for mainboards
to override or set additional NVS
- add acpi_fill_madt() function for skylake
- remove acpi_create_serialio_ssdt() function as it is unused
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I52225e8d38ed846c29d44872e3f4d6ebaf4a7e52
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c717bb418a0cb6002582572632e42b44b473f718
Original-Change-Id: I0910ac8ef25de265ae1fde16b68f6cbacedb4462
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297800
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11581
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove the acpi_tables.c functions so these functions can move to
SOC init code. The file itself is included by x86/arch code and
must exist for the build to succeed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: Ia9657f4a39c30ed7a0fd7ca4815bb2614f049911
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93ae87f2429af5cb9d497f8b5ef8b8dffe370df4
Original-Change-Id: Ifc2f64dc1693e7bd3f5a43144d84ff033b2cfe8b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297759
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11580
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove the acpi_tables.c functions so these functions can move to
SOC init code. The file itself is included by x86/arch code and
must exist for the build to succeed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I18e6a0be5eac053598b613b30b622c4963417919
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: af04eb112adf58578c8d2c9d3d182d4c2024abb2
Original-Change-Id: Ibe026d493c25d771357ea39e4b956629fbb799ac
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297758
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11579
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove thermal.h as it is not used by this board.
Remove functions from acpi_tables.c so they can move to SOC.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-sklrvp coreboot (does not compile due to GPIO changes)
Change-Id: I934fcc451a722f853034c0970074ee3259cc704f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e3b5c0ed8295091d3d5761b8456f3c13c6bd8bc
Original-Change-Id: If855f598e895e38c58657af17130158b2f73de81
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297757
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11578
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Read and print the board ID if it is enabled in the mainboard.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: I9d50089242b3a2f461dff2b1039adc8f0347179e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f245854b30c40eda38453c1b0ae5d3b8b18c010f
Original-Change-Id: Ifbd7c2666820ea146dc44fbc42bfe201cb227ff6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297756
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11577
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Clean up the intel/kunimitsu mainboard code to match the code
and cleanups in glados. Many of these are trivial changes that
do not impact things in a meaningful way but will make it easier
to diff the code and keep the mainboards in sync.
- use relative path for mainboard includes to make porting easier
- fix trivial style issues to match glados so diffs are clean
- pull GPIO configuration into gpio.h and use from there
- remove thermal.h as it is not used on this board
- make info message BIOS_INFO instead of BIOS_ERR
- add support for SPD manufacturer and part number in SMBIOS
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I64a053bcec0e0ff25a57f65659f391ab64d9a11a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e47f0fd3e00a665f07098c7ea0018d51b105d1be
Original-Change-Id: Ib787f3ccc63115de48c4d608ca2bd81b58d24b6c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297752
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11576
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Select the EC PD and software sync kconfig options so they are
supported by the mainboard and call the EC early init function
to reboot into RO in recovery mode.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I48316df99b796c568c2481c72588b41f7147bec0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7507470f82848062bc98da809d3c5fe1ca31998
Original-Change-Id: I822aac9c24718f226819e5d3fcc82a4024b7c5a7
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297751
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11575
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Select the BOARD_ID_AUTO kconfig option to have the coreboot
tables populated with the board ID and print it early in
romstage as well. Also clean up the code for it.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-kunimitsu coreboot
Change-Id: I90bd85ef14543717287cbeaaab77e6c54b94df97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1fed7de4a0650a497a240b091fd2eb99d59e1433
Original-Change-Id: I82e9d17ab618b1aae1fd874d9247b7d52b42334d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297750
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11574
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
