summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-06libpayload: usb: handle situation with no free device addressPatrick Georgi
Change-Id: I1308bdca90f1a09d980f384ee85552198a39b965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1260940 Reviewed-on: https://review.coreboot.org/18036 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: xhci: plug leakPatrick Georgi
Change-Id: Ia163872846906c6c78144a984a405812f856f626 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1325835 Reviewed-on: https://review.coreboot.org/18035 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06libpayload: timer: cast cpu_khz to make sure 64bit math is usedPatrick Georgi
Change-Id: Iaf84de2330b433076a66c22fa72ffb45e957c0dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1261177 Reviewed-on: https://review.coreboot.org/18034 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06util/romcc: avoid shifting more than the variable's widthPatrick Georgi
That's undefined behavior in C Change-Id: I671ed8abf02e57a7cc993d1a85354e905f51717d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229557 Reviewed-on: https://review.coreboot.org/18014 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06nb/intel/*/northbridge.c: Remove #include <device/hypertransport.h>Arthur Heymans
Nothing from that header is used or even declared since CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not selected on Intel hardware. Change-Id: I9101eb6ffa6664a2ab45bc0b247279c916266537 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18044 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-06payloads/external/SeaBIOS: Bump version to 1.10.1Philipp Deppenwiese
Changes since SeaBIOS 1.9.3 Release 1.10.0: * Initial support for Trusted Platform Module (TPM) version 2.0 * Several USB XHCI timing fixes on real hardware * Support for "LSI MPT Fusion" scsi controllers on QEMU * Support for virtio devices mapped above 4GB * Several bug fixes and code cleanups Release 1.10.1: * Updates for QEMU for reproducible builds Change-Id: I465700307d72fa44b6900b38b332603ea505ed09 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-06arch/x86: fix cmos post logging in non romcc bootblockAaron Durbin
cmos_post_init() is called in src/arch/x86/bootblock_simple.c, and that function is reponsible for bootstrapping the cmos post register contents. Without this function being called none of the cmos post functionality works correctly. Therefore, add a call to lib/bootblock.c which the C_ENVIRONMENT_BOOTBLOCK SoCs use. BUG=chrome-os-partner:61546 Change-Id: I2e3519f2f3f2c28e5cba26b5811f1eb0c2a90572 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18043 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-01-05src/amd: Add common definition of AMD ACPI MMIO addressTimothy Pearson
The bare ACPI MMIO address 0xFED80000 was used in multiple AMD mainboard files as well as the SB800 native code. Reduce duplication by using a centrally defined value for all AMD ACPI MMIO access. Change-Id: I39a30c0d0733096dbd5892c9e18855aa5bb5a4a7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18032 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-05mb/ga-m57sli-s4: Fix early uart outputArthur Heymans
The console output is garbled until it is fixed in ramstage by devicetree which sets the uart clock predivider correctly. Change-Id: I6d6ec0febfec98a8d4a71e1476036c804cf5f08d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17969 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04util/crossgcc: update jenkins-build-toolchainMartin Roth
This allows the make jenkins-build-toolchain to use the BUILDGCC_OPTIONS variable. Previously, the options were hardcoded. Change-Id: I5f4c1d3fc8c714ec3640356ae3c86ae157f486d2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17766 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-04buildgcc: Remove quotes around a $CC callNico Huber
If we use ccache we have to interpret spaces in $CC as separation characters. The downside is that we can't support spaces in the compiler's path. But, well... Change-Id: I4e6e6324389354669a755f570083a40ff00b1bbf Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/18018 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2017-01-04util/cbfstool: Fix to build with latest llvmManoj Gupta
cbfs-payload-linux.c:255:43: note: add parentheses around left hand side expression to silence this warning if ((hdr->protocol_version >= 0x200) && (!hdr->loadflags & 1)) { [pg: also fix the semantics. Thanks Nico for catching this] BUG=chromium:665657 TEST=coreboot-utils builds Change-Id: I025c784330885cce8ae43c44f9d938394af30ed5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35c4935f2a89c3d3b45213372bcf0474a60eda43 Original-Change-Id: I8758e7d158ca32e87107797f2a33b9d9a0e4676f Original-Reviewed-on: https://chromium-review.googlesource.com/411335 Original-Commit-Ready: Manoj Gupta <manojgupta@chromium.org> Original-Tested-by: Manoj Gupta <manojgupta@chromium.org> Original-Reviewed-by: Mike Frysinger <vapier@chromium.org> Reviewed-on: https://review.coreboot.org/17568 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-04google/auron: Fix omitted ACPI KB backlight for variantsMatt DeVillier
Restores KB backlight functionality for auron variants gandof, lulu, and samus. TEST: boot Lulu and observe KB backlight functional Change-Id: Iaa852f9327ff1690111db610b4cc5266cd7925b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17960 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-04vboot: Remove rmu.bin from FW_MAIN_A and FW_MAIN_BLee Leahy
Add rmu.bin to the list of files that exist only in the read-only section (COREBOOT) of the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I30cbd3fb2ef1848807e4de4c479dc7a561c1faba Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18031 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2017-01-04intel/i945 boards: Add romstage time stampsPaul Menzel
Currently, some Intel 945 boards miss some or all of the time stamps *1:start of rom stage*, *2:before ram initialization*, and *3:after ram initialization*, so add them. Use the same formatting as used for the board Lenovo X60, which already has code for all the time stamps. Change-Id: Ie25747d02fadd74b7d7b7cab234a7a88b2cc0c42 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17993 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-01-04soc/intel/quark: Add monotonic timer supportLee Leahy
Add the Kconfig value HAVE_MONOTONIC_TIMER and the routine to read the TSC for the monotonic timer. Simplify the routine to get the TSC frequency. TEST=Build and run on Galileo Gen2 Change-Id: I806fb864b01e39277bf2d6276254b0543930c2f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18002 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/romcc: remove dead assignmentsPatrick Georgi
Change-Id: Iab6fe065faeacfca3b41eb5bae1075dcfb1a2b05 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: scan-build (clang 3.8) Reviewed-on: https://review.coreboot.org/18021 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/romcc: Ensure that bit shift is validPatrick Georgi
Change-Id: Idbe147c1217f793b0360a752383203c658b0bdce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1287090 Reviewed-on: https://review.coreboot.org/18020 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/romcc: avoid leaking a typePatrick Georgi
Only allocate ptr_type when it's actually used. Change-Id: Iea5f93601a42f02a1866bdff099f63935fdd5b8d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1129117 Reviewed-on: https://review.coreboot.org/18017 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/romcc: avoid dereferencing NULL pointerPatrick Georgi
argv is only filled for macro->argc > 0. Change-Id: I5ff21098384afc823efa14be3d5565507fb2b3b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1287089 Reviewed-on: https://review.coreboot.org/18016 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/romcc: free variable after usePatrick Georgi
closure_type is copied then never used again. Close that leak. Change-Id: Idd4201f7fc6495fde5ad2e1feb7e499e38986e92 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1287073 Reviewed-on: https://review.coreboot.org/18015 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03broadcom/bcm5785: don't treat KBC-DATA as COM1Patrick Georgi
Add a break statement instead. While there, fix a bunch of typos in comments. Change-Id: I465c0188d4b46eabf8d17e69fa0fdc6a9c2ad66e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229645 Reviewed-on: https://review.coreboot.org/18013 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03vboot: Clear battery cutoff flags when vbnv_cmos loads backup VBNV.Hung-Te Lin
When CONFIG_VBOOT_VBNV_CMOS_BACKUP_TO_FLASH is set, vbnv_cmos will try to load VBNV from flash if the VBNV in CMOS is invalid. This is usually correct, except the case of battery cut-off. CMOS will always be invalid after battery cut-off if there is no RTC battery (or if that is dead). However, in current implementation the backup in flash is only updated in coreboot, while the real battery cutoff (and the clearing of cutoff flags in VBNV) is done in payload (Depthcharge) stage. This will create an endless reboot loop that: 1. crossystem sets battery cutoff flag in VBNV_CMOS then reboot. 2. coreboot backs-up VBNV_CMOS to VBNV_flash. 3. Depthcharge sees cutoff flag in VBNV_CMOS. 4. Depthcharge clears cutoff flag in VBNV_CMOS. 5. Depthcharge performs battery cutoff (CMOS data is lost). 6. (Plug AC adapter) Reboot. 7. Coreboot sees invalid VBNV_CMOS, load backup from VBNV_flash. 8. Jump to 3. As a result, we should always clear battery cutoff flags when loading backups from VBNV_flash. BRANCH=glados,reef BUG=chrome-os-partner:61365,chrome-os-partner:59615 TEST=emerge-reef coreboot bootimage; Change-Id: I3250a3a179a7b0de9c6e401e4a94dcd23920e473 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/423460 Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/18008 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03rockchip/common: Loosen I2C frequency target requirementsJulius Werner
I've recently added an assertion to ensure that the effective I2C frequency on Rockchip SoCs is not too far off the 400KHz target due to divisor rounding errors. A 10KHz margin worked fine for RK3399, but it turns out that RK3288 actually only ever hit 387KHz since its I2C clocks are based off the already pretty low 75MHz PCLKs. While we could probably change the PCLKs to make this closer, that seems like a too intrusive change for something that has already worked just fine for years, so just loosen the restriction a little more instead. BRANCH=None BUG=chromium:675043 TEST=None Change-Id: I7e96a1a75b38f8ad3971dd33046699cceb17b80d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/421095 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03i2c/tpm: Ignore 0xFF bytes for status and burstCountJulius Werner
We've found that the SLB9645 TPM sometimes seems to randomly start returning 0xFF bytes for all requests. The exact cause is yet unknown, but we should try to write our TIS code such that it avoids bad interactions with this kind of response (e.g. any wait_for_status() immediately succeeds because all "status bits" are set in the response). At least for status and burstCount readings we can say for sure that the value is nonsensical and we're already reading those in a loop until we get valid results anyway, so let's add code to explicitly discount 0xFF bytes. BRANCH=oak BUG=chrome-os-partner:55764 TEST=None Change-Id: I934d42c36d6847a22a185795cea49d282fa113d9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/420470 Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/18006 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03Revert "google/oak: increase the driving strength for 4GB DRAMs"Nicolas Boichat
This reverts commit 34a6537512d412363bf56428b7ae284e6dd80fb3, which appears to cause random stability issues on some elm units. BRANCH=oak BUG=chrome-os-partner:60869 BUG=chromium:673349 TEST=None Change-Id: I5ce9e2673db1bc7a1f487a3c3bcce4651a5e3567 Reviewed-on: https://chromium-review.googlesource.com/419862 Commit-Ready: Nicolas Boichat <drinkcat@chromium.org> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18005 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Add early debugging codeLee Leahy
Add Kconfig values and early debugging code to better segment and debug the early code in bootblock by using the SD LED as an indicator. Update the help text for the debug Kconfig values to point to the various failure locations. TEST=Build and run on Galileo Gen2 Change-Id: I1cd62eba3e9547cb1dd7f547aaec5d4827e14633 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Fix serial port configurationLee Leahy
Fix serial port configuration broken by how PCI configuration space was referenced introduced by change 3d15e10a (MMCONF_SUPPORT: Flip default to enabled). TEST=Build and run on Galileo Gen2 Change-Id: I2ab52cf598795e94f1f16977f8d12b7fdd95e146 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/abuild: Don't set XGCCPATH if it's in the environmentMartin Roth
Change-Id: I0fa231ca3d33300a671810e994c5be54ac10a18b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17723 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-03mb/asus/p5gc-mx: Remove extra BSEL strap checkArthur Heymans
This extra check is based on comparing CPU BSEL pins and reports in MCH configuration. This gives false positives in the case of 1333MHz CPUs which automatically get downgraded to 1067MHz by the northbridge (max supported frequency by 945gc). TESTED with Intel Xeon 5460 (does not boot but completes raminit) Change-Id: I34cb37912906c803abdad0adbd9c589ca86a67c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17997 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03mb/intel/d945gclf: Fix resume from S3 suspendArthur Heymans
Checking for dram self refresh in MCHBAR8(SLFRCS) generates false positives. Change-Id: I25afd565cae0269616e38ecbcdf385281bae5d1f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17996 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03util/inteltool: Add ICH6-10 to BIOS_CNTL listArthur Heymans
Without this change inteltool cannot read BIOS_CNTL values nor can it read the SPIBAR values. Change-Id: I9ff16e060aca66e3cb11c8315a6843ccecd1d3c2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17979 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03util/inteltool: Fix ICH SPIBAR registersArthur Heymans
The ICH7 SPIBAR offset and registers are different from later generation. ICH8 has a different offset from later generation. ICH6 has no SPI controller. Change-Id: I7691bce619089b15805114047bcb1fd121a5722b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17978 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03sb/nvidia/mcp55: Fix P_state generationArthur Heymans
amd_generate_powernow is never called by in lpc_slave_ops. Move it to lpc_ops like on all other AMD southbridges. TESTED on Gigabyte ga-m57sli-s4 Change-Id: I7db036e681d591a19e15dd3eaafb88b72a41bea1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03mb/ga-m57sli: Add cmos.defaultArthur Heymans
If the cmos checksum is incorrect it should fall back to sane defaults. Change-Id: If16cfc73effd4a825d0cefcd30bfd0e48b2d9132 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17968 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-03superiotool: Add support for HWM registers on W83627EHGArthur Heymans
Based on datasheet: "W83627EHF/EF W83627EHG/EG WINBOND LPC I/O, Revision : 1.0" Change-Id: Ia2e5ab8bc454a34a89fe2cf06bfba55261109785 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17457 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03superiotool: Add support for HWM registers on W83627DHGArthur Heymans
Based on datasheet: "W83627DHG WINBOND LPC I/O, Version: 1.4" Change-Id: Id20dff7539d926ef6f68265efbfc7420539d9bca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17964 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03google/snappy: Update DPTF settingsWisley Chen
1. Update DPTF TSR1/TSR2 passive/critial trigger points. TSR1 passive point:53, critial point:80 TSR2 passive point:90, critial point:100 2. Update PL1 Min to 4W and PL1 Max to 12W 3. Update thermal relationship table (TRT) setting. BUG=none BRANCH=master TEST=build, boot on snappy dut and verified by thermal team member. Change-Id: I8b4fb178daa7c2e4091a14779a125bd5e943d023 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17955 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-03mainboard/google/reef: Update DPTF parameters EVT1_v0.3Tim Chen
Update the DPTF parameters based on thermal test result. (ZHT_DPTF_EVT1_v0.3_20161227.xlsx) 1. Update DPTF CPU/TSR1/TSR2 passive/critial trigger points. CPU critical point:103 TSR1 passive point:45 TSR2 passive point:55, critical point:90 2. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 3secs Change Charger Effect on Temp Sensor 2 sample rate to 60secs Change CPU Effect on Temp Sensor 1 sample rate to 8secs BUG=chrome-os-partner:60038 BRANCH=master TEST=build and boot on electro dut Change-Id: I3746750f7ea4a2e01153a36c28a5c33140c9e38c Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17975 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-03sb/intel/common/gpio: Support ICH9M and priorPatrick Rudolph
Write gpio level twice to make sure the level is set after pins have been configred as GPIO and to minimize glitches on newer hardware. Required to set correct GPIO layout on T500. Tested on T500. Change-Id: I691e672c7cb52ca51a80fd29657ada7488db0d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18012 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2017-01-02util/cbfstool: Don't print region information on stderr by defaultPatrick Georgi
It's usually not too interesting, so hide it behind -v. Change-Id: Icffb5ea4d70300ab06dfa0c9134d265433260368 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/17899 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-30drivers/uart/oxpcie_early.c: remove uart_fill_lb()Martin Roth
uart_fill_lb() was added to drivers/uart/uart8250mem.c, so when the Oxford OXPCIe952 Kconfig option is enabled, we were getting an error. "multiple definition of `uart_fill_lb'" The new version of uart_fill_lb sets the regwidth depending on the Kconfig symbol DRIVERS_UART_8250MEM_32, so if that's selected, don't give DRIVERS_UART_OXPCIE as a choice. Change-Id: Ife24ab390553b10b2266809595c2e06463de708c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17966 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-29Kconfig: Document what ASPM meansJonathan Neuschäfer
Change-Id: I57dd933ad70ffac95388d832bd5047f2225688e3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17973 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-29payloads/external: Download FILO over HTTPSJonathan Neuschäfer
Change-Id: I1b44e32505b96978849d39764ff399a502fa6e84 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17972 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-29payloads/external: Download iPXE over HTTPSJonathan Neuschäfer
Change-Id: Ie4979ab8491ee821b39a273c5f354c445105d2a4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17971 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-28mb/asus/p5gc-mx: Fix and complete SIO devicetree optionsArthur Heymans
The devicetree lacks the 'chip' option for the Super I/O, which causes the Super I/O related entries to be ignored. This also adds other LDN that are present on this Super I/O. Change-Id: Ida1b3c6575aa53bc7060070835c811665bdc1db1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17965 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-28util/intelmetool: Fix warning building with 32-bitPaul Menzel
On a 32-bit system, pointers are 32-bit wide, and not 64-bit, resulting in the warning below. ``` mmap.c: In function ‘map_physical_exact’: mmap.c:26:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] virt_addr = mmap((void*)mapto, len, PROT_WRITE | PROT_READ, ^ ``` Fix this by using compatible types. Change-Id: I4ede26127efcbd5668b978e6880a0535607e373d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17970 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-28buildgcc: Indicate CXXFLAGS for binutilsNico Huber
CXXFLAGS seems to be used a lot and have to be specified independently from CFLAGS. Change-Id: Iff4c76e54a46e908299b532fd848165a3dc04d43 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17937 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-28buildgcc: Fix string comparison operatorNico Huber
Change-Id: I8ff8d51507dcf12cd554c8b4713074a99e47c11e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17942 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-28Microcode: Show a useful warning when microcode bins are missingMartin Roth
Because the binary repo is disabled by default, we get frequent questions about why the build failed, relating to microcode in the binary repository. - Show an error saying that the file is missing instead of the typical make error of no rule to build the file. - Show a note encouraging users to try enabling the binary repo if it's not enabled. Change-Id: If4148c18cfb781ed2932bd2ae4a289b621afdebf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17940 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-27buildgcc: Build GMP `--with-pic` if GCC defaults to `-pie`Nico Huber
GCC 6 can optionally default to building all binaries as position independent executables (PIE). This breaks linking against static libraries that are compiled without position independent code (PIC). Building GMP `--with-pic` in this case seems to be the least fragile solution. TEST=Run `make all` and `make BUILDGCC_OPTIONS=-b build-i386` in util/crossgcc on Debian Stretch. Change-Id: I5f3185af9c8d599379a628e18724b217b88be974 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17936 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-12-27device/dram/ddr3: add FTB timingsNicola Corna
SPD revision 1.1 introduced FTB timings, an extra set of SPD values that specify a more precise tCKmin, tAAmin, tRCDmin, tRPmin and tRCmin. For backwards compatibility, the MTB is usually rounded up and the FTB part is negative. For this reason some memories were not set up optimally, as the FTB part was ignored and the resulting timing wasn't set to the minimum value. The tests were performed on a Lenovo X220 with two Micron 8KTF51264HZ-1G9E (1866 MHz): reading only the MTB part, coreboot reports a tCKmin of 1.125 ns, corresponding to a working frequency of 800 MHz; with the additional tCKmin FTB part (-0.054 ns) the new (rounded) value is 1.070 ns, valid for a 933 MHz operation. Tested also with Ballistix DDR3-1866 SODIMM on Lenovo T420: the memory is now detected as DDR3-1866 instead of DDR3-1600. Some manufacturers (like Micron) seems to expect a small rounding on the timings, so a nearest-value rounding is performed. If this assumption isn't correct, an error up to ~2 ps can be committed, which is low enough to be safely ignored. Change-Id: Ib98f2e70820f207429d04ca6421680109a81f457 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/17476 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-27console: Enable do_printk_va_list for VBOOTLee Leahy
Use CONFIG_VBOOT to enable do_printk_va_list to match the conditionals in include/console/console.h and the only caller is vboot/vboot_logic.c. CONFIG_VBOOT is also selected for CONFIG_CHROMEOS. TEST=Build and run on Galileo Gen2 Change-Id: Ia115c74afa498a14d5edd6f7940ec2edc124516f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-27cpu/intel/common: Add/Use common function to set virtualizationMatt DeVillier
Migrate duplicated enable_vmx() method from multiple CPUs to common folder. Add common virtualization option for CPUs which support it. Note that this changes the default to enable virtualization on CPUs that support it. Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17874 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-26google/eve: Enable internal pull-up on PWRBTN#Duncan Laurie
Enable an internal pull-up on the power button input as a quick press is resulting in power button override being asserted. BUG=chrome-os-partner:61312 TEST=tested on eve P0b to ensure quick power button press does not result in a shutdown due to power button override. Change-Id: I3028cf7faef309cf4d60c3585b48adab6e1549d4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17962 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-26mainboard/google/chell: Set TCC activation offset to 10 degree CSumeet Pawnikar
With the default TCC activation offset value as 0 and Tjmax temperature value as 100 degree C, Pcode firmware starts taking prochot action at 100 degree C [Tjmax-Offset]. But before Pcode firmware starts prochot action at 100 degree C, device is getting shutdown at 99 degree C due to DPTF critical CPU temperature. This patch sets TCC activation offset value to 10 degree C for thermal throttle action to prevent this kind of shutdown. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built, booted on skylake and verified target offset value. Change-Id: I0811ef481a4b3ce4bd6ef24f2aa8160f44f9c990 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17921 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-26soc/intel/skylake: set TCC activation by BSP onlySumeet Pawnikar
TCC activation functionality has package scope. It was set for all CPU in the system which is unnecessary. In this patch TCC activation is being set by the BSP only. BUG=chrome-os-partner:59397 BRANCH=None. TEST=Built for skylake platform and verified the TCC activation value before and after S3. Change-Id: Iacf64cbc40871bbec3bede65f196bf292e0149a6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23soc/intel/skylake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCh=None TEST=Compiles successfully for chell and eve. Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-22Add/Combine Broadwell Chromebooks using variant board schemeMatt DeVillier
Combine existing boards google/auron_paine and google/samus with new ChromeOS devices auron_yuna, gandof and lulu, using their common reference board (auron) as a base. Chromium sources used: firmware-yuna-6301.59.B 6ed8b9d [CHERRY-PICK: broadwell: Update to...] firmware-gandof-6301.155.B 666f34f [gandof: modify power limiting for...] firmware-lulu-6301.136.B 8811714 [lulu: update RAMID table] Additionally, some minor cleanup/changes were made: - I2C devices set to use level (vs edge) interrupt triggering - HDA verb entries use simplified macro entry format - correct FADT table header version - remove unused ACPI device entries / .asl file(s) - clean up ACPI code (e.g., trackpad on Lulu) - adjust _CID for trackpad on Lulu in order to not load non-functional Windows driver (does not affect Linux) - remove unused header includes (multiple/various) - correct I2C addresses used for SMBIOS device entries - correct misc typos etc The existing auron_paine samus boards are removed. Variant setup modeled after google/slippy Change-Id: I53436878d141715eb18b8ea5043d71e6e8728fe8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22Combine Broadwell Chromeboxes using variant board schemeMatt DeVillier
Combine existing boards google/guado, rikku, and tidus using their common reference board google/jecht as a base. Additional changes besides simple consolidation include: - simplify power LED functions - simplify HDA verb definitions using azelia macros - use common SoC functions to generate FADT table - correct FADT table header version - remove unused haswell_pci_irqs.asl - remove unused header includes (various) - set sane default fan speed (0x4d) for all variants Variant setup modeled after google/beltino Change-Id: I77a2dffe9601734916a33fd04ead98016ad0bc4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17913 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22mb/asus/p5gc-mx: Add mainboardArthur Heymans
Tested to work: * GPU (Nvidia gt210) in PCIe x16 slot; * SATA; * serial; * 800MHz and 1067MHz FSB Core 2 Duo CPUs; * ethernet; * native VGA graphic init. What does not work: * resume from s3 suspend; * superio hardware monitor (not initialised in coreboot). Quirks: * does not boot with just one dimm in slot B. Change-Id: Ide5494be7f2f16d6b5cfd2ccf4ec438f0587add5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17558 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-22agesa and binaryPI mainboards: Fix devicetree hudson commentsMarshall Dawson
Make the ending comment associated with "chip ...hudson" match the appropriate directory name. Change-Id: I5e0d6d41a2e3f963760aad08ed6108acac5b66b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17904 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-21libpayload: Get current tick from high register in generic timerPaul Kocialkowski
This fixes the generic timer driver to get the current tick from the high register, so that comparison with the high count value (obtained previously from the same register) has a chance to succeed. Change-Id: I5ce02bfa15a91ad34641b8e24813a5b7ca790ec3 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/17929 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-21soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR InitBrenton Dong
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21drivers/intel/fsp2_0: add FSP TempRamInit & TempRamExit API supportBrenton Dong
FSP v2.0 Specification adds APIs TempRamInit & TempRamExit for Cache-As-Ram initialization and teardown. Add fsp2_0 driver support for TempRamInit & TempRamExit APIs. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: I482ff580e1b5251a8214fe2e3d2d38bd5f3e3ed2 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21nb/i945/early_init.c: Add FSB800 and 1067 to Egress Port Virtual ChannelElyes HAOUAS
Values based on vendor bios and suggested by Arthur Heymans for FSB1067. FSB1067: The ratio 1067/800 is proportional to the ratio of EPBAR32(0x2c) bits: 0x1a / 0x14 ~ 1067/800 EPVC1IST: The ratio is also proportional to FSB ratios: 0x9c / 0xf0 ~ 533/800. Change-Id: Ib90e8ea1b82f2fcc3b5c199cace32a7f0aff4b5c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17198 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-20mb/google/slippy: Hook up libgfxinitArthur Heymans
Both HDMI and eDP work (simultaneously). TESTED on Acer C720 (peppy). Change-Id: Ifc4e3c187bcabd8965d9586237a52b440bfa7f20 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17916 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-20nb/intel/haswell: Hook up libgfxinitArthur Heymans
Change-Id: I55e2d99b3f9929703f34d268f4490f3c5c2c766f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17915 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20mb/lenovo/x60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo X60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo X60. So remove it. TEST=Build and boot on Lenovo X60t. Change-Id: Ia37d9f0ecf5655531616edb20b53757d5d47b42f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17703 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20google/eve: Fix configuration of some GPIOsDuncan Laurie
GPP_D12 needs an internal pull-up to get this rail working on current boards. GPP_D0-GPP_D3 were changed from SPI interface and I just missed this change earlier. BUG=chrome-os-partner:58666 TEST=test camera and touchpad on eve Change-Id: Idfa186f2930afbe5651f4e0fc11a19cd0dd4295f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17922 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-20riscv: enable counters via m[us]counterenRonald G. Minnich
The user and supervisor counters could not be safely enabled before as the register numbers were not finalized. Now that everyone agrees, we can enable them. Until we are sure the toolchains are caught up, we use the hardcode name with the register names in comments. As soon as toolchains settle down we'll do one more pass and convert to the symbolic names. Tested on lowrisc bitstream and SPIKE simulator. Change-Id: I21fe5cac44fafe4b7806e004c179aa27541be4b6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17920 Tested-by: build bot (Jenkins) Reviewed-by: Alex Bradbury <asb@lowrisc.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andrew Waterman <aswaterman@gmail.com>
2016-12-19drivers/spi: fix flash writes at page boundariesAaron Durbin
There was an assumption that all SPI controllers could consume a full page of data to write. However, that assumption doesn't hold when spi_crop_chunk() indicates sizes smaller than page size. If the requested offset isn't page aligned from the start then writes will fail corrupting data since a page boundary isn't honored. The spansion driver needed quite a bit more work to honor the spi_crop_chunk() result. It now mimics the other driver's code. Also, needed to add spi_crop_chunk() to marvell/bg4cd SoC to make google/cosmos build. SPI obviously doesn't work on that platform, but it fixes the build error. Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17910 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19google/poppy: Add new boardFurquan Shaikh
Add poppy board files using kabylake and FSP 2.0. BUG=chrome-os-partner:60713 BRANCH=None TEST=Compiles successfully Change-Id: Ic9aa5093b319690ae893a21cab98d9b843000e6c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-19amd/mainboard: Clean up bettong, gardenia USB todosMarshall Dawson
An incorrect board name was propagated over various generations of mainboards. Correct the comments for these. Addressing the todo items will come in a later patch. Change-Id: I4abd028fee5087955a7b6ba8d38f99c8207d24b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17903 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19motherboard/amd: Clean up bettong, gardenia makefilesMarshall Dawson
Declutter the conditional building of fchec.c. Use the CONFIG setting directly instead of ifeq (). Change-Id: I6d3721764e66e5615a639c1979d60ff1291b5d33 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17902 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19amd/gardenia: Update ACPI routingMarshall Dawson
Reduce the Bettong devices and match up the comments to the northbridge. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from e7c38571be6406453640d671210b2074a91f162e) Change-Id: I53adff741f5cf2bd75c37421949bd30f214f5692 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17849 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19drivers/intel/gma: Use scaling to simplify fb configNico Huber
Utilize libgfxinit's support for scaling to simplify the framebuffer configuration. In case of multiple displays of different resolutions, we had configured one framebuffer big enough for their union, each display only showing its respective upper left window. Instead, we use the smallest resolution now and show the whole image on all displays. Change-Id: I70a9d92f88ef891703829945264f94ac7eff09b0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17492 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-12-19drivers/intel/gma: Add textmode support with libgfxinitNico Huber
Add an alternative gfxinit implementation for textmode. The legacy VGA plane and textmode is configured through coreboot provided functions. libgfxinit uses this plane as alternative to the usual high resolution plane. Change-Id: Iad0754c50fc6faec35f49583fe1c7cb50ac6c0c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17279 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-19pcengines/apu2: add board supportPiotr Król
Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19amd/gardenia: Add AHB bridge registers in ACPIMarshall Dawson
Add the region used by the A-Link to AHB configuration registers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (squashed from 2c8dafdf44cf1a84cbc25e8aa381c04c160ee705 and 3c755f70ffa36c0fc92a1da0e3f5f877c8dc9e8b) Change-Id: I7398452c6e70b4545e16398f3fec157f2f30293a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17848 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Add I2C devices to ACPIMarshall Dawson
Add the missing two I2C controllers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from 0be00a96b9eb40c959a422a5ca4773d2353d244d) Change-Id: I3ea74a6c0472711102b19a7ca0209aaeeeb2d601 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17847 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Clean up GPIO ASLMarshall Dawson
Remove the unused Name field. Its previous design generates an FWTS error and a recommendation for changing it to Serialized. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1d970f1aa16c647e56a08c83f5719041882a2fc0) Change-Id: I27748a4f84286e80043f516564ef64350ef3fef9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17846 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ti/beaglebone: Define arch for omap-header buildKyösti Mälkki
Required to add rules.h as default include, otherwise we get error: ./src/include/rules.h:128:5: error: "__COREBOOT_ARM_ARCH__" is not defined [-Werror=undef] Previously, rules.h was not included in omap-header build at all. Change-Id: I75265916856f2f21f7966619ea65d63acd599e2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17746 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18AMD binaryPI: Promote rules.h to default includeKyösti Mälkki
Also remove config.h, kconfig.h will pull that one in. Change-Id: I798b3ffcf86fca19ae4b0103bb901a69db734141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/fsp_rangeley: Fix use of __SIMPLE_DEVICE__Kyösti Mälkki
Required fix to have rules.h as default include. Change-Id: I6ce2d4e13de5139a84c709b5836ecd41c0abc836 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17747 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-18intel cache-as-ram: Move DCACHE_RAM_BASEKyösti Mälkki
Having same memory region set as both WRPROT and WRBACK using MTRRs is undefined behaviour. This could happen if we allow DCACHE_RAM_BASE to be located within CBFS in SPI flash memory and XIP romstage is at the same location. As SPI master by default decodes all of top 16MiB below 4GiB, initial cache-as-ram line fills may have actually read from SPI flash even in the case DCACHE_RAM_BASE was below the nominal 4GiB - ROM_SIZE. There are no reasons to have this as board-specific setting. Change-Id: I2cce80731ede2e7f78197d9b0c77c7e9957a81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/i82801ix: Add HAVE_INTEL_FIRMWAREKyösti Mälkki
Select this to provide menu in menuconfig to add flash descriptor file. ME or GbE firmwares themselves are not required, but integrated NIC MAC and SPI configuration fields are still useful. Change-Id: I14b86e2f38ec39924d2cbf0932d82f66ed356a03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17805 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18emulation/qemu-q35: Increase default ROM_SIZEKyösti Mälkki
Larger size fits GRUB payload and fixes case to build 82801ix with HAVE_INTEL_FIRMWARE. Change-Id: I90e33fb3a0b0e1a60dcc2a9a022bef034f3270d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17830 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ACPI S3: Signal successful bootKyösti Mälkki
Just before jumping to OS wakeup vector do the same tasks to signal coreboot completion that would be done before entry to payload on normal boot path. Change-Id: I7514c498f40f2d93a4e83a232ef4665f5c21f062 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18riscv: Add support for timer interruptsRonald G. Minnich
RISCV requires that timer interrupts be handled in machine mode and delegated as necessary. Also you can only reset the timer interrupt by writing to mtimecmp. Further, you must write a number > mtime, not just != mtime. This rather clumsy situation requires that we write some value into the future into mtimecmp lest we never be able to leave machine mode as the interrupt either is not cleared or instantly reoccurs. This current code is tested and works for harvey (Plan 9) timer interrupts. Change-Id: I8538d5fd8d80d9347773c638f5cbf0da18dc1cae Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17807 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-12-17Revert "arch/x86/smbios: Correct manufacturer ID"Nico Huber
This reverts commit c86da67436827c25919a2f5966049485a58fc984. Alas, I have to disagree with this in every single line. The comment added to the top of the file only applies to a single function therein which sits over a hundred lines below. That's not much helpful. More- over, the link in the comment is already down ofc. The comment is also irritating as it doesn't state in which way (enco- ding!) it applies to the code, which presumably led to the wrong in- terpretation of the IDs. At last, if anything should have changed it is the strings, the IDs are resolved to. `smbios_fill_dimm_manufacturer_from_id()` has to resolve the IDs it gets actually fed and not a random selection from any spec. Since I digged into it, here's why the numbers are correct: The func- tion started with the SPD encoding of DDR3 in mind. There, the lower byte is the number of a "bank" of IDs with an odd-parity in the upper most bit. The upper byte is the ID within the bank. The "correction" was to clear the parity bit for naught. The function was later exten- ded with IDs in the DDR2-SPD encoding (which is actually 64-bit not 16). There, a byte, starting from the lowest, is either an ID below 127 plus odd-parity, or 127 which means look in the next byte/bank. Unused bytes seem to be filled with 0xff, I guess from the 0xff2c. Change-Id: Icdb48e4f2c102f619fbdca856e938e85135cfb18 Reviewed-on: https://review.coreboot.org/17873 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-17nb/x4x: Add other Eaglelake IGD PCI DID to listArthur Heymans
Currently only there is only one eaglelake board in coreboot (ga-g41m-es2l) featuring a G41 variant northbridge. Adding boards with a different variant (Q43, Q45, G43, G45, B43) will require this change for graphic initialisation. Change-Id: Ida32c563a99576b66685dfdadf9a534fd6e197dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17900 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-17google/reef: Use exported GPIOs and ACPI regulator for touchscreenFurquan Shaikh
ELAN touchscreen device expects firmware to export GPIOs and ACPI regulators for managing power to the device. Thus, provide the required ACPI elements for OS driver to properly manage this device. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that touchscreen works properly on boot-up and after suspend/resume. Change-Id: I298ca5de9c0ae302309d87e3dffb65f9be1e882e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17799 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-17drivers/regulator: Add driver for handling GPIO-based fixed regulatorFurquan Shaikh
This change adds the required device node in SSDT for defining GPIO-based fixed voltage regulator. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that ELAN touchscreen works with exported GPIOs and ACPI regulator. Change-Id: I4380aea0929fb7e81dbe83f940e3e51e983819f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17798 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-16google/eve: Set throttle offset to 10 degreesDuncan Laurie
Set the thermal throttle (prochot) activation to be 10 degrees below TJmax so PROCHOT# kicks in at 90C instead of 100C. BUG=chrome-os-partner:58666 TEST=boot on eve, check msr value before and after resume: > iotools rdmsr 1 0x1a2 0x000000000a6400e6 > echo mem > /sys/power/state > iotools rdmsr 1 0x1a2 0x000000000a6400e6 Change-Id: I3ab3a050a1e27c18a940bd7519eabaf015ef93eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17901 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-16amd/gardenia: Enable LPC decodesMarshall Dawson
Turn on LPC decoding in romstage. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 5d9dae5a1fdab1bf6c418dc7e6de28069bd342dc) Change-Id: I937eb5c5b6c6a9f7a13ebd0bec7fcc8d789427ce Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17227 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 22:59:44 +0000