| Age | Commit message (Expand) | Author |
|---|
| 2008-03-16 | Here is an updated patch addressing most of Uwe's and Peter's ... | Ed Swierk |
| 2008-03-16 | This patch implements support for the Intel 3100 integrated SuperIO and UART.... | Ed Swierk |
| 2008-03-16 | This patch updates the PCI IDs for Intel 3100 devices. ... | Ed Swierk |
| 2008-03-16 | give the fam10 code a little more space until we have the time to debug this | Stefan Reinauer |
| 2008-03-16 | check whether SST FWH chip was successfully erased on flashchip -E, too | Stefan Reinauer |
| 2008-03-16 | Sort list of flash chips alphabetically, add comment (trivial). | Uwe Hermann |
| 2008-03-15 | remove nasty warning that happened due to our vendor detection | Stefan Reinauer |
| 2008-03-15 | fix typo | Stefan Reinauer |
| 2008-03-15 | BIOS_SPEW is log level 9. There is nothing beyound that line. | Stefan Reinauer |
| 2008-03-15 | Following patch extends the ROM decoding to last 1MB, allowing to use larger | Rudolf Marek |
| 2008-03-15 | Following patch fixes the retrain/reset sequence which caused problem with some | Rudolf Marek |
| 2008-03-14 | Re-add code erroneously removed in r3140. | Uwe Hermann |
| 2008-03-14 | Changes M50FW080 to use 82802ab.c instead of jedec.c. This fixes the problem ... | Joseph Smith |
| 2008-03-14 | Prepare for ICH7/ICH8 SPI support by adding some debugging for all | Carl-Daniel Hailfinger |
| 2008-03-14 | Add a Config-abuild.lb for the rca/rm4100 (trivial) | Corey Osgood |
| 2008-03-14 | Fix broken flashrom build. | Uwe Hermann |
| 2008-03-14 | Fix up one forgotten revert in r3140. | Carl-Daniel Hailfinger |
| 2008-03-14 | Revert the delete of 82802ab.c in r3137. | Carl-Daniel Hailfinger |
| 2008-03-13 | Also print the chip vendor name in --list-supported output (trivial). | Uwe Hermann |
| 2008-03-13 | Also print the required -m option in --list-supported output (trivial). | Uwe Hermann |
| 2008-03-13 | Drop 82802ab.c as it is identical to sharplhf00l04.c. | Carl-Daniel Hailfinger |
| 2008-03-13 | Update AMD CPU list based on Revision Guide for AMD NPT Family 0Fh Processors, | Uwe Hermann |
| 2008-03-12 | Formatting fixes, no content changes (trivial). | Uwe Hermann |
| 2008-03-12 | Drop the useless rom.layout file. It's just an example, likely never | Uwe Hermann |
| 2008-03-12 | Add --list-supported option to flashrom which lists the supported | Uwe Hermann |
| 2008-03-10 | Add GPIO dumping utility for Intel ICH series southbridges. | Stefan Reinauer |
| 2008-03-10 | The ATI vga rom is only 36K on the Tyan s2881. | Ward Vandewege |
| 2008-03-10 | This patch changes the Config.lb files and adds a Config-lab.lb file for the | Ward Vandewege |
| 2008-03-09 | Initial support for the Intel 82830 northbridge and RCA RM4100 board. | Joseph Smith |
| 2008-03-08 | Various cosmetic and coding style fixes for ASUS A8V-E SE (trivial). | Uwe Hermann |
| 2008-03-04 | Drop some duplicate documentation from the README. The manpage and | Uwe Hermann |
| 2008-03-04 | Add missing license header to layout.c. The file was written by | Uwe Hermann |
| 2008-03-01 | Rename lxbios to nvramtool, step 3 (rename directory). | Uwe Hermann |
| 2008-03-01 | Rename lxbios to nvramtool, step 2 (rename files). | Uwe Hermann |
| 2008-03-01 | Rename lxbios to nvramtool. | Uwe Hermann |
| 2008-03-01 | Small coding style fixes and documentation updates (trivial). | Uwe Hermann |
| 2008-03-01 | Create a genacpi directory below util/ which will hold all acpi related | Corey Osgood |
| 2008-02-28 | In pci_device.c, the class for VGA was not tested properly, leading to | Ronald Hoogenboom |
| 2008-02-26 | Temporarily disable the fan control patch from this morning; it turns out to | Ward Vandewege |
| 2008-02-25 | This patch adds support to dump other registers than the primary | Ronald Hoogenboom |
| 2008-02-25 | This patch adds automatic fan control for the CPU fan on the m57sli | Ronald Hoogenboom |
| 2008-02-25 | This trivial patch removes an unused local variable, thus getting rid of | Ronald Hoogenboom |
| 2008-02-21 | The proprietary VGA rom is only 36K on Tyan s2882, not 48K. | Ward Vandewege |
| 2008-02-21 | Add support for the Via CN700 with a C7 CPU and DDR2 RAM. Only a single DIMM is | Corey Osgood |
| 2008-02-20 | Route device IRQ through PCI bridge instead in mptable. | Yinghai Lu |
| 2008-02-20 | Initial support for MSI MS-7135 (K8N Neo3) mainboard. | Jonathan A. Kollasch |
| 2008-02-20 | flashrom: Add board_enable for Artec Group DBE61 and DBE62 | Mart Raudsepp |
| 2008-02-19 | I'm attaching the patch which should fix both problems. Fix the | Rudolf Marek |
| 2008-02-18 | Should be part of changeset 3106. | Rudolf Marek |
| 2008-02-18 | Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDN | Rudolf Marek |
| 2008-02-18 | This patch introduces virtual LDNs changes for W83627EHF driver. Not only LDN... | Rudolf Marek |
| 2008-02-18 | Use virtual LDNs. It enables the GPIOs correctly (it preserves the GPIO5/2 fr... | Rudolf Marek |
| 2008-02-18 | Some SIO/PNP devices are abusing register 0x30 for multiple LDN enables, like | Rudolf Marek |
| 2008-02-15 | Importing mkelfimage from | Stefan Reinauer |
| 2008-02-14 | With this small change it is possible to build flashrom again when | Clark Rawlins |
| 2008-02-11 | flashrom: further cleanups to enable_flash_cs5536 | Mart Raudsepp |
| 2008-02-09 | add $(CROSS_COMPILE) to ar calls. | Marc Jones |
| 2008-02-09 | Flashrom: Add board enable for VIA EPIA SP. | Luc Verhaegen |
| 2008-02-08 | Improve error handling and make RCONF_DEFAULT_MSR address be a constant. | Mart Raudsepp |
| 2008-02-08 | This implements support for devices using AMD Geode companion chip | Mart Raudsepp |
| 2008-02-07 | Change payload location in 'normal' - this was missed in r3992 and thus break... | Ward Vandewege |
| 2008-02-07 | This is a trivial patch. I missed one of the ROM names when I converted them... | Myles Watson |
| 2008-02-07 | Make the check for -fno-stack-protector fail silently, if it fails. | Ward Vandewege |
| 2008-02-07 | Change references to qemu in Coreboot-v2 calls to qemu-x86. | Myles Watson |
| 2008-02-06 | This patch changes the Config.lb files and adds Config-lab.lb files for | Myles Watson |
| 2008-02-06 | Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like | Carl-Daniel Hailfinger |
| 2008-02-05 | This patch changes all rom names that aren't coreboot.rom in Config.lb files. | Myles Watson |
| 2008-02-05 | Factor out print_conf() from Geode LX mainboard directories. The | Carl-Daniel Hailfinger |
| 2008-02-01 | This patch fixes the decoding of the IO address range 0x0820->0x0827 into the | Florentin Demetrescu |
| 2008-02-01 | This patch reverses an erroneous change that sneaked in during r2972, and broke | Ward Vandewege |
| 2008-01-28 | v2: Fix Serengeti-Cheetah flags too | Jordan Crouse |
| 2008-01-28 | [V2]: Add CFLAGS to targets to suck in any passed in flags | Jordan Crouse |
| 2008-01-28 | Fix mptable util so the output will compile | Jon Dufresne |
| 2008-01-27 | Add support for the Abit BE6-II V2.0 board. | Uwe Hermann |
| 2008-01-27 | Make the vendor name optional in the -m flashrom parameter when there's only | Peter Stuge |
| 2008-01-27 | Add a new record type "console" for lbtable, and insert one record | Patrick Georgi |
| 2008-01-27 | Forgot to add Spansion S25FL016A to README, trivial. | Peter Stuge |
| 2008-01-26 | This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA... | Ronald G. Minnich |
| 2008-01-26 | Correctly disable the ROM area Write Protect bit in the Geode LX. | Marc Jones |
| 2008-01-25 | bsh/ksh-clone and make(1)-syntax don't go well together | Patrick Georgi |
| 2008-01-25 | This patch adds a new record type for lbtable to provide information | Patrick Georgi |
| 2008-01-25 | Various small fixes and updates for lxbios (trivial). | Uwe Hermann |
| 2008-01-25 | Add ids and chip entry for Spansion S25FL016A to flashrom, tested, | Peter Stuge |
| 2008-01-22 | Use "--build-id=none" as linker flags if build-id is supported. | Marc Karasek |
| 2008-01-22 | Here is just a little and simple patch to get the MX25L3205D working. | Harald Gutmann |
| 2008-01-22 | Flashrom did not use the read function for verifying, it used direct memory | Carl-Daniel Hailfinger |
| 2008-01-22 | Make sure we delay writing the next byte long enough in SPI byte | Carl-Daniel Hailfinger |
| 2008-01-21 | Omitting the wait for SPI ready when there is no data to be read, e.g. | Ronald Hoogenboom |
| 2008-01-21 | This patch adds version information to flashrom. Because 'v' and 'V' | Bernhard Walle |
| 2008-01-20 | last try i hope. Building with a payload changes the result of the rom | Stefan Reinauer |
| 2008-01-20 | give it 2k more space for abuild. let's look into this anyways, but get rid of | Stefan Reinauer |
| 2008-01-19 | Add Bingxun Shi <bingxunshi@gmail.com> to the list of contributors (trivial). | Uwe Hermann |
| 2008-01-19 | Small superiotool fix to detect more Winbond W83627EHF chips. The | Uwe Hermann |
| 2008-01-19 | This patch is for winbond w83627DHG superio support in superiotool. | Bingxun Shi |
| 2008-01-19 | Support SPI flash chips bigger than 512 kByte sitting behind IT8716F | Ronald Hoogenboom |
| 2008-01-18 | Document the --list-supported option. Various small fixes (trivial). | Uwe Hermann |
| 2008-01-18 | Minor documentation improvements/fixes in the README and manpage (trivial). | Uwe Hermann |
| 2008-01-18 | rename linuxbios_* files in utils repository. | Stefan Reinauer |
| 2008-01-18 | rename linuxbios_* files, too. | Stefan Reinauer |
| 2008-01-18 | util/ renames | Stefan Reinauer |
