| Age | Commit message (Collapse) | Author |
|---|
|
Problem with UMA region allocation was fixed when MTRRs changed to use
memrange implementation.
Change-Id: I420dac30de2836a91596d81f88bb45b46f248532
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5719
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Short list of known issues for this patchset:
* Suspend/Resume - does not work
* Combi pci card for SD/MMC card reader with IEEE1394 - not found
* Shutdown - sometimes does not work as expected
* At least mysterious harddrive i/o
Change-Id: Iaba8d1f5e471cfeca20d82f4e1b416641e1f2ae9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/5672
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Used by the Lenovo ThinkPad T520
Change-Id: I1009616cc4c18ebd0e3be7ceb50398617b49e3a3
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/5671
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Include C0 microcode drop.
BUG=None
BRANCH=rambi,squawks
TEST=Built. Booted B3 part.
Change-Id: If454658235cd5a7b8640de0b3fa12dccddb0e9f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182080
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5041
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This improves boot time in 2 ways for a firmware upgrade:
1. Normally MRC would detect the S0 state without an MRC cache
even though it's told to the S5 path. When it observes this
state a cold reset occurs. The cold reset stays in S5 for
at least 4 seconds which is time observed by the end user.
2. As the EC was running RW code before the reset after firmware
upgrade it will still be running the older RW code. Vboot will
then reboot the EC and the whole system to put the EC into RO
mode so it can handle the RW update.
The issues are mitigated by detecting the system is in S0 with
no MRC cache and the EC isn't in RO mode. Therefore we can do the
reboot without waiting the 4 secs and the EC is running RO so
the 2nd reboot is not necessary.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Booted. Updated firmware while in OS. Rebooted. Noted the
EC reboot before MRC execution.
Change-Id: I1c53d334a5e18c237a74ffbe96f263a7540cd8fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182061
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5040
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It's helpful to have a generic function that will tell
the EC to reboot if the EC isn't running a specified
image. Add that and implement google_chromeec_early_init()
to utilize the new function still maintaing its semantics
of if recvoery mode is enabled the EC should be running its
RO image. There is a slight change in that no communication
is done with the EC if not in recovery mode.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Built and boot with recovery request. Noted EC reboot.
Change-Id: I22240f6a11231e39c33fd79796a52ec76b119397
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182060
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5039
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Added a method in each temp sensor to disable the aux trip points
and then a wrapper function to call this method for each enabled
temperature sensor.
The event handler function is changed to not use a switch statement
so it does not need to be serialized. This was causing issues
with nested locking between the global lock and the EC PATM mutex.
Some unused code in temp sensors that was added earlier is removed
and instead a critical threshold is specified in _CRT.
The top level DPTF device _OSC method is expanded to check for the
passive policy UUID and initialize thermal devices. This is done
for both enable and disable steps to ensure that the EC thermal
thresholds are reset in both cases.
Additionally the priority based _TRT is specified with TRTR=1.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and start
esif_uf application. Observe that temperature thresholds are set
properly when running 'appstart Dptf' and that they are disabled
after running 'appstop Dptf'
Change-Id: Ia15824ca42164dadae2011d4e364b70905e36f85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182024
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5037
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Set critical temperature thresdholds to 70C. This will cause DPTF
framework to shut down the system so it may need to be higher or
lower but will need some testing.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, start DPTF framework and observe it
using specified critical thresholds.
Change-Id: Ibbf6d814295eb5ff006cb879676b7613f5eb56a3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182025
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5038
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PATx methods will be passed a temperature in deci-kelvin,
so it needs to be converted back to kelvin before being sent
to the EC.
The PAT disable method is changed to take the temperature ID
as an argument so individual sensors can be disabled.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and
esif_uf userspace application. Start and stop DPTF and see
that temperature thresholds are set to sane values.
Change-Id: Ieeff5a5d2d833042923c059caf3e5abaf392da95
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182023
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5036
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When an EC thermal event occurs call the DPTF thermal threshold
event handler to handle notifications.
Change-Id: Ica928790bb478fccf8a46afef4eb7800589518b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5726
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove some unused functions from CPU participant that were
confusing the userland component since the CPU does not have
an ACPI managed sensor.
- Guard the charger participant with an ifdef so it can be
left out if not supported.
- Use the EC methods for setting auxiliary trip points and for
handling the event when those trip points are crossed.
- Add _NTT _DTI _SCP methods for thermal sensors. I'm not
clear if these are required or not but they seem to be expected
by the other DPTF framework components.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and load ESIF framework
Change-Id: I3c9d92d5c52e5a7ec890a377e65ebf118cdd7087
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5028
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC now supports two auxiliary programmable trip points for
thermal monitoring. These are expected to be used by DPTF and
need to be exported.
In order to support these the header was updated from the latest
chrome ec source.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I257d910daac4e36280c0cecf4129381a32ffcb9a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181661
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5027
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Add passive thresholds for thermal participants
- Disable the charger participant and remove from _TRT
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and start ESIF framework
Change-Id: Ie5917413aceadee6e39594257aaafb0bcb399d09
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181663
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5029
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SMI on TCO timer timeout policy was copied from other
chipsets. However, it's not very advantageous to have
the TCO timer timeout trigger an SMI unless the firmware
was the one responsible for setting up the timer.
BUG=chromium:321832
BRANCH=rambi,squawks
TEST=Manually enabled TCO timer. TCO fires and logged in
eventlog.
Change-Id: I420b14d6aa778335a925784a64160fa885cba20f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181985
Reviewed-on: http://review.coreboot.org/5035
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PMC in baytrail maintains an additional set
wake status in memory-mapped registers. If these
bits aren't cleared the device won't be able to
go to S5 or S3 without being immediately woken up.
Therefore clear these registers.
BUG=chrome-os-partner:24913
BRANCH=rambi,squawks
TEST=Ensured PRSTS bit 4 is cleared after a reboot and S3 and S5 work
correctly.
Change-Id: I356e00ece851961135b4760cebcdd34e8b9da027
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181984
Reviewed-on: http://review.coreboot.org/5034
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When CONFIG_ELOG is selected the reset, power, and wake
events are logged in the eventlog.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Various resets and wake sources. Interrogated eventlog
to ensure results are expected.
Change-Id: Ia68548562917be6c2a0d8d405a5b519102b8c563
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181983
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5033
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The memory reference code doesn't maintain some of
the registers which contain valuable information in order
to log correct reset and wake events in the eventlog. Therefore
snapshot the registers which matter in this area so that
they can be consumed by ramstage.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Did various resets/wakes with logging patch which
consumes this structure. Eventlog can pick up reset
events and power failures.
Change-Id: Id8d2d782dd4e1133113f5308c4ccfe79bc6d3e03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181982
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The C0 part uses a new cpuid.
BUG=None
BRANCH=squawks,rambi
TEST=None.
Change-Id: Iddf1bc4d6f7bbec3ca92bff8edf613e00a4b4286
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181980
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5031
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
KBD_IRQ# is moved to GPIO SC101, with SC50 going back to its original
SERIRQ function.
Note that this change breaks Rambi 1.5 keyboard functionality.
BUG=chrome-os-partner:24424
TEST=Manual on Rambi 2.0. Verify KB functions in OS with SC50 / SERIRQ KB
interrupt toggling removed from EC code.
BRANCH=Rambi, Glimmer, Clapper
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I3fa40441741ea9d52a6e2ff15925570510b5b82b
Reviewed-on: https://chromium-review.googlesource.com/181757
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5030
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7d0e8d2119a470428cfc01c0738b8988ab75ba2d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5624
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: If7141112ea67071ee05c52f455c3b2496aa7e17e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5622
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
While backing out the empty pc80 keyboard struct we encountered some
special cases where chip.h is used for other purposes. Deal with these
cases.
Change-Id: Ib11a46cfd14d050d5daa213623b9d8a401c06410
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5621
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is a empty struct that has propagated through the superio's & ec's
but really does nothing. Time to get rid of it before it adds yet more
cruft. However, since this touches many superio's at once we do this in
stages by first changing the function type to be a pure procedure.
Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5617
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
We should configure i8254/i8259 down in to the southbridge rather than
romstage of every AGESA/CIMx board much like Intel boards do.
Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5669
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SoC needs to provide a 32k clock signal SUSCLK for
some modems to work properly, so this enables the signal.
BUG=chrome-os-partner:24425
TEST=Manual, check SUSCLK pin with a scope.
Change-Id: Ibc0d5bb38a2c3e16f381dfc256097fdced67fd1c
Reviewed-on: https://chromium-review.googlesource.com/180101
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5722
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
|
|
eMMC CLK was incorrectly configured as PULL_UP, but should have been
PULL_DOWN. 2K pulls somehow masked this problem.
BUG=chrome-os-partner:24353
TEST=Verify eMMC is bootable on Rambi on boards that previously failed
with an all-20K, all-PU eMMC pin configuration.
BRANCH=None
Change-Id: I0cbb6ebbb6818f83402b99330728266b09a0f5d6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181034
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5026
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The BISOC.EXIT_SELF_REFRESH_LATENCY field should
not be updated from the default.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180730
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5025
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi's reference code will live at slot 3 in the
verified firmware section.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. Verified correct area where
reference code was loaded from.
Change-Id: I8bee46600429ac8f732fe334852f69aff1324150
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180027
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5024
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When employing vboot firmware verification the reference
code loading should load from the verified firmware
section. Add this ability.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted rambi. Noted firmware being loaded
from rw verified area. Also noted S3 resume loading
from cached area.
Change-Id: I114de844f218b7573cf90107e174bf0962fdaa50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180026
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5023
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The kernel iosf driver uses HID INT33BD to probe and
be provided the 12 bytes in PCI for access.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, load iosf_mbi driver and
verify that it gets address 0xe00000d0
Change-Id: I865eafe664f00f21d1ebb967c291083830d895b9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180098
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5021
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Not used currently on rambi board. Disable in case it
saves power.
BUG=chrome-os-partner:23862
BRANCH=none
TEST=build and boot on rambi
Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5020
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
With the ACPI GNVS exported and depthcharge changed to
initialize eMMC in ACPI mode we can now put the SCC
devices into ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot on rambi, test eMMC and SD card
Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5018
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Make sure reg_script is executed before the device is put into
ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi from eMMC in ACPI mode
Change-Id: I4090babbfc7fb0f3be4da869386e998d87a513ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5017
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Since this file will get added to payloads it is useful if it
exports what offset in NVS it lives.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi with emmc in ACPI mode
Change-Id: I52860980c91dfe2525628e142b34ca192e69b258
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179848
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5014
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Make use of the ITE common Super I/O framework and there-by removing any
hard coding of Super I/O base address.
Change-Id: I14af89d2727d7c6bac0f9840043c430726297429
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5717
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Following the reasoning of:
cf7b498 superio/fintek/*: Factor out generic romstage component
Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5585
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Provide devicetree.cb RAMstage configuration of this superio component.
Change-Id: I376d2fb6dafc301cbc437518012f8c43b0af4be2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5668
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
No need to pass CPP down to SeaBIOS, it's not
architecture specific and they define their own
variable.
Change-Id: I811aaf3929fa11cc01b7f168ccd310008e21e60c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5715
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove arch-level Kconfig menu option as it shows all available architectures in
make menuconfig. Instead pull the bootblock options for choice and update image
to top-level Kconfig since it is already present for both x86 and arm.
Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5673
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Lines with 'select SERIAL_CPU_INIT' where redundant with the
default being yes. Since there is no 'unselect SERIAL_CPU_INIT'
possibility, invert the default and rename option.
This squelches Kconfig warnings about unmet dependencies.
Change-Id: Iae546c56006278489ebae10f2daa627af48abe94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5700
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Turn on WDT support in the devicetree. Turn off CIR support.
Dispense with old commentary.
Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5698
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Turns out there are a few minor differences of the LDN's in the AD rev.
of this Fintek chip. 0x07 is in fact the WDT so renaming and remove the
now incorrect io mask. Add missing CIR LDN functionality and touch up
src inline doc.
Change-Id: I440aebad71d62d199d3283dd061933e76b21dda5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5696
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In order to use the same reference code on S3 resume
that was booted the program needs to be cached. Piggy
back on the ramstage cache to save the loaded reference
code program.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed. Noted locations of reference
code caching and load addresses in console.
Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179777
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
To prepare for caching reference code for S3 resume the
ramstage cache needs to be accesible in ramstage as well.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I4c825c965b98cd71ea0eb9c93fe168a358da4c97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179776
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5012
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Allow ramstage cache to be used from ramstage proper. Also
add a helper function for checking validity of ramstage
cache structure.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: If1f2ad1bcf64504b42e315be243a12432b50e3d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179775
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5011
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Certain code paths want to know if S3 resume is
happening. However, the current baytrail code doesn't
note S3 resume early enough. Therefore, mark S3
resume just after pattr setup.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179774
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5010
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The inclusion of reg_script_run_on_dev() allows
for removing some of the chained reg_scripts just
to set up the device context. Use the new reg_script
function in those cases.
BUG=None
BRANCH=None
TEST=Built and booted. Didn't see any bizarre dmesg or coreboot
console output.
Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438
Signed-off-by: Aaron Durbin <adurbin@chromium.og>
Reviewed-on: https://chromium-review.googlesource.com/179541
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
According to the reference code all these registers
need to be set to their best known values.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake. No idea about
observable impact yet.
Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179749
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5008
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There's a slew of ports required to initialize baytrail's
perf and power values. Therefore, add the necessary
functionality in the iosf module as well as the reg_script
library.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted.
Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179748
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5007
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The iosf access functions already use some common code,
however there is a duplication for setting up the proper
control register for port and opcode. Introduce macros
to remove this verbosity.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake.
Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179747
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5006
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The reg_script library has proven to be useful. It's
also shown that many scripts operate on devices. However,
certain code paths run the same script on multiple,
but different, devices. In order to make that easier
introduce reg_script_run_on_dev() which takes a device
as a parameter. That way, chained reg_scripts are not
scrictly needed to run the same script on multiple devices.
BUG=None
BRANCH=None
TEST=Built.
Change-Id: I273499af4d303ebd7dc19e9b635ca23cf9bb2225
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179540
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5005
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This adds the option to put LPSS and SCC devices into ACPI mode
by saving their BAR0 and BAR1 base addresses in a new device
NVS structure that is placed at offset 0x1000 within the global
NVS table.
The Chrome NVS strcture is padded out to 0xf00 bytes so there
is a clean offset to work with as it will need to be used by
depthcharge to know what addresses devices live at.
A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and
the EMMC 4.5 IRQ is changed to 44.
New ACPI code is provided to instantiate the LPSS and SCC devices
with the magic HID values from Intel so the kernel drivers can
locate and use them.
The default is still for devices to be in PCI mode so this does
not have any real effect without it being enabled in the mainboard
devicetree.
Note: this needs the updated IASL compiler which is in the CQ now
because it uses the FixedDMA() ACPI operator.
BUG=chrome-os-partner:23505,chrome-os-partner:24380
CQ-DEPEND=CL:179459,CL:179364
BRANCH=none
TEST=manual tests on rambi device:
1) build and boot with devices still in PCI mode and ensure that
nothing is changed
2) enable lpss_acpi_mode and see I2C devices detected by the kernel
in ACPI mode. Note that by itself this breaks trackpad probing so
that will need to be implemented before it is enabled.
3) enable scc_acpi_mode and see EMMC and SDCard devices detected by
the kernel in ACPI mode. Note that this breaks depthcharge use of
the EMMC because it is not longer discoverable as a PCI device.
Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179481
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5004
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The LLVM integrated assembler has some deficiencies in support for
building AGESA. See:
LLVM PR18918 - [RFE]: Missing altmacro support in integrated assembler
Disable llvm-mc for the moment until these have been addressed fully
upstream.
Change-Id: Id4131d1de04d01c0bec284f976f0ba9662b950ab
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5711
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
'prove' that clang is supported (to some extent).
Change-Id: I181f4910ba64ab9746e7ac94aa79da23cdd41dad
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5709
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Payloads using Kconfig get confused by coreboot Kconfig
configuration in environment variables. Prune them.
Change-Id: I63da2af0a15dca35d70cd65b2f74a1564aab9483
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5710
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
CPU - fsp_model_206ax:
- Remove Kconfig options and mark this as using the FSP.
- Use shared FSP cache_as_ram.inc file
Mainboard - intel/cougar_canyon2:
- Update to use the shared FSP header file.
- Modify to call copy_and_run() directly instead of returning to
cache_as_ram.inc.
Northbridge - fsp_sandybridge:
- remove mrccache, fsp_util.[ch]
- add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits.
- Update to use the shared FSP header file.
These changes were validated with FSP:
CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd
SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801
MD5: 24965382fbb832f7b184d3f24157abda
Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area. This is used by northbridge / southbrige / SOC code. It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"
Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Following the same reasoning as commit
d3043313a91dff3bc2f879ffb3b4bf23a364d711 superio/fintek/f81865f: Avoid
.c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ia6ed36c8517a95b651fefdd855eec0ec91d73187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5439
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Overriding global config entries in mainboard directory Kconfig
files often raise unnecessary warnings. Squelch some of those.
Change-Id: Ib5127672ae068670028aa25c8ccb5366277622f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5699
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
For bzImages the trampoline segment is added unconditionally.
However, that segment wasn't properly being accounted for.
Explicitly add the trampoline segments like the other ones.
Change-Id: I74f6fcc2a65615bb87578a8a3a76cecf858fe856
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5702
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ic1a9f2f01c26ee97cd7183fcf1755cb916f1b02e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5704
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This enables the DPTF framework, but it doesn't do much
without some sort of kernel+user components to drive it.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: Icb632a6e70c3912bbdfa6ef3f5c87cd79d2b8a3a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5003
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is not complete yet but it compiles and doesn't cause
any issues by itself. It is tied into the EC pretty closely
so that is part of the same commit.
Once we have more of the EC support done it will need some
more work to make use of those new interfaces properly.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: I4b27e38baae18627a275488d77944208950b98bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179459
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5002
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These are the values that are seen with VBIOS and
may need tweaked for derivative panels.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: Ie3120ab3c5298135626e8534d3954acd263dc74b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179365
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5001
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
These need to be set before the kernel will work without
running the VBIOS option rom.
Also necessary is setting the PP_CONTROL register with
the EDP_FORCE_VDD bit.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179364
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5000
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Now that the SD card controller is limited to the SD card
2.0 spec it's possible to use 20K pulls for the pads.
BUG=chrome-os-partner:24423
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Able to dd to/from /dev/mmcblk1 without
any errors.
Change-Id: Id5396c55330a84bf7a09d227507d2bfcde66a1a4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179423
Reviewed-on: http://review.coreboot.org/4999
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The rambi board can only meet the SD card 2.0 specification.
Therefore, the controller capabilities need to be overridden
to match.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. /sys/kernel/debug/mmc0/ios shows
high speed as maximum timing as well as 3.3V signal voltage.
Change-Id: Ib3824800852376e0f15a70584917d6692087ccfe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179415
Reviewed-on: http://review.coreboot.org/4998
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The SD card controller can have the capabilities it supports
to be overridden. Add two optional fields to the chip structure
to allow the mainboard to override the SD card controller
capabilities.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. Noted capabilities override console output.
Change-Id: Ibfef8f765b35eeec6da969dd05f5484f8672a7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4997
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The VDAT data was off by 2 bytes when reading it from the
kernel. The reason is that the header did not line up
correctly with actual ACPI code.
BUG=chrome-os-partner:24440
BRANCH=None
TEST=crossystem devsw_cur now returns either 0 or 1 depending
on state.
Change-Id: Ie78599f29cd5daf7da98db5e37fa276d24339f6a
Signed-off-by: Aaron durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179372
Reviewed-on: http://review.coreboot.org/4996
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Bay Trail has 3 banks of gpios. Therefore, in order to
properly identify a gpio the specific bank number as well
as the GPIO within that bank is needed. The SPI
write-protect GPIO is GPIO 6 within the SUS bank (offset
0x2000).
BUG=chrome-os-partner:24324
BUG=chrome-os-partner:24408
BRANCH=None
TEST=Built and booted. Looked at GPIO sysfs in the
chromeos_acpi directory.
Change-Id: Ic51b5abe3bacf6cf9b6a90cf666f1a63b098a0e3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179195
Reviewed-on: http://review.coreboot.org/4995
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The LPE audio device needs 1MiB of memory for its firmware.
It also has a requirement that the memory needs to be on a
512MiB boundary. Just take 1MiB @ 512MiB for the LPE device.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and analyzed console logs for resources. Also interrogated
registres within the kernel.
Change-Id: I4d9ad5c7b5a2f3eb627b30528d738289278b3a7b
Reviewed-on: https://chromium-review.googlesource.com/179192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4994
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
On Ubuntu /bin/sh is symlinked to /bin/dash. The
current toolchain.inc was doing some things that
dash doesn't support. Make the shell callouts more
conforming to the POSIX sh standard.
Change-Id: I26b6b82b8d6158c9029e8be9e7c088ca9e207f21
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5701
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Leave it under BOOTMODE_STRAPS to control whether these have
any functional meaning on the build.
Change-Id: Ieb59aa7ab4b1e8da6a1002e7a8e5462eb7988d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5643
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ib8448f3d36a23538cd9fea897f09da3ec4ad007a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5647
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I72471ac68088cd26f8277b27b75b7d44ad72cfc4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5642
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This feature is no longer specific to ChromeOS builds.
Change-Id: If27d4dc7caff8a551b5b325cdebdd05c079ec921
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5641
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I7b3d044fad1d6973910e9bef347478a45c149a4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5640
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Provision the configuration of the Fintek F71869AD Hardware Monitor's
configuration by way of devicetree.cb. Make use of this in the
jetway/nf81-t56n-lf board to properly control fan's.
Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5580
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Facilitate for the configuration of so called "Multi-function Select
Registers" with devicetree.cb in ramstage.
Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to
correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI
mode. This allows the Fintek to correctly talk to the Southbridge over
the SMBus for CPU temperature data as to control fans and so on.
Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5576
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
romstage reports a completely unintelligible printf of "error level:",
fix this and document meaning of the return values in source.
Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
ec_in_rw needs to be read by depthcharge, which only supports legacy
GPIOs.
BUG=chrome-os-partner:24408
TEST=Manual on Rambi. Cold + warm boot device, verify that depthcharge
detects the proper ec_in_ro state.
BRANCH=None
Change-Id: I25802b445c795eb85580c22d880efee8eeb21318
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179228
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4993
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The Linux kernel driver cannot handle Baytrail legacy GPIOs, so make the
default input GPIO type MMIO.
BUG=chrome-os-partner:24408
TEST=Manual on Rambi. Run "echo 169 > /sys/class/gpio/export; cat
/sys/class/gpio/gpio169/value", verify GPIO value changes based upon mic
jack status.
BRANCH=None
Change-Id: I27870ce8b7ecae9228e06e48c8759409c824c2eb
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179169
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4992
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up
on certain boards.
BUG=chrome-os-partner:24353
TEST=Manual. Burn FW on board that previously failed to boot eMMC,
verify chromeos can now install + boot from eMMC.
BRANCH=none
Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178917
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4991
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi 1.5 boards use the native SD card controller on baytrail.
Therefore, enable those signals. The CLK, D*, and CMD pins use
2K pulls as these were shown to not exhibit any errors when
doing reads or writes to a DDR50 sd card.
Note that if a servo is connected on needs to enable the
sd_vref_sel rail to pp1800 as this causes issues with card
detect if it is not set to pp1800.
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Tested sd card read and write works in kernel.
Also noted that write protect detection works as well.
Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178961
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4990
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The enable_resources callback was accidentally populated
with NULL. Make that callback be the generic
pci_dev_enable_resources.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted.
Change-Id: I670b51bd9aff6764e9b549287a737b662572cdc7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178960
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4989
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The new IASL is complaining about the PCI memory region not
having consistent base/end/length values because they are
placeholder that are fixed up in the method before returning.
Put in some more valid placeholder values to make it happy.
BUG=chromium:311294
BRANCH=none
TEST=build and boot with IASL 20130117 on rambi
Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178864
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4988
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0].
Configure it for 25MHz.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted. Noted message in console output.
Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178781
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4987
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add device tree option to determine if the LPE
audio codec has a platform clock signal connected
to it from the SoC. If a frequency is selected the
platform clock number is used to enable the
clock.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted rambi with 25MHz option. Probed pin
to audio codec. Noted 25MHz clock.
Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178780
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4986
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
There are 3 banks of GPIOs that need to be described
with specific _UID and memory/interrupt values.
BUG=chrome-os-partner:24314
BRANCH=none
TEST=build and boot on rambi, check for probed driver:
gpiochip_find_base: found new base at 154
gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00
gpiochip_find_base: found new base at 126
gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01
gpiochip_find_base: found new base at 82
gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02
fed0c000-fed0cfff : INT33FC:00
fed0c000-fed0cfff : INT33FC:00
fed0d000-fed0dfff : INT33FC:01
fed0d000-fed0dfff : INT33FC:01
fed0e000-fed0efff : INT33FC:02
fed0e000-fed0efff : INT33FC:02
Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178601
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4985
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
With microcode 31E MWAIT 0x51 is now C6NS and 0x52 is now C6FS.
BUG=chrome-os-partner:23505
BRANCH=none
TEST=build and boot on rambi, check that C1/C2/C3 are all used now
Change-Id: I8528d808f4082c85d90e2b57747d9f2e2d982b85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178461
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4984
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
use IS_ENABLED() over #if brackets
Change-Id: I101f99971c0f7b5311ef19cc9832713ab0696935
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5692
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ic555d23a9112677a784dd814601f8202d4d17261
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5691
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Some 1.5 boards have a single channel ram configuration.
Accomodate such configs.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built and booted ChromeOS.
Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178340
Reviewed-by: Nick Sanders <nsanders@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: http://review.coreboot.org/4983
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Add config option to enable RMT in the MRC.
BUG=chrome-os-partner:21807
TEST=Manual. Build w/ "USE=rmt", verify RMT print seen on FW console.
Build w/o USE flag, verify no RMT print.
BRANCH=None.
CQ-DEPEND=CL:*148655
Change-Id: Ibd3da87317a3359e797d9b43bc437e7227a85048
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178095
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4982
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Add PCIe driver to initialize root ports.
BUG=chrome-os-partner:24111
TEST=Manual on Rambi. Verify that PCIe Wifi card is detected and able to
detect networks.
BRANCH=None.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I3c68da5f27cd162e112add488bdf5ced192b7d12
Reviewed-on: https://chromium-review.googlesource.com/177652
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4981
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
NCORE pad addresses were wildly wrong due to documentation bugs.
BUG=chrome-os-partner:24179
TEST=Manual on Rambi. Verify display isn't always on. Verify brightness
control now works in Chrome OS.
BRANCH=None.
Change-Id: I464436a58baa4957329c11231c5a866dafd97ce8
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177597
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4980
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The level shifting between 3.3V and 1.8V for the SERIRQ
signal is not working. Instead use the SERIRQ pad as
a gpio which is used as a direct IRQ signal for the
keyboard interupt.
BUG=chrome-os-partner:23965
BRANCH=None
TEST=Built and booted rambi. Keyboard works with associated EC change.
CQ-DEPEND=CL:177189
Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177223
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-on: http://review.coreboot.org/4979
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The romstage code for rambi uses the mmio way of reading
inputs. However, this is a problem is the GPIOs are set up
as legacy mode. Subsequent warm resets mean the ram_id is
read incorrectly. Ensure the ram_id is read consistently
by keeping the GPIOs for ram_id in mmio mode.
BUG=chrome-os-partner:24085
BRANCH=None
TEST=Built and booted. And rebooted. Now seeing consistent ram_id
values on warm resets.
Change-Id: Ieff98c000be80998854f325754f1e819975d2be5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The default mode of the SPI controller has prefetching disabled.
That obviously has a performance impact. Enable both caching
and prefetching to make booting faster. This has a significant
impact on streaming data out of SPI.
BUG=chrome-os-partner:24085
BRANCH=None
TEST=Built and booted rambi. Payload loading step went from ~285ms
to ~54ms.
Change-Id: I065cf44e1de7dcefc49aa9ea9ad0204929ab26f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177220
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4976
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
When a pad is configured for direct IRQ it needs to be in
non-legacy. Additionally, the signal is passed directly to
the APIC by setting the LEVEL and TPE bits in the pad config
register. The APIC can then be configured for level, edge,
and rising/falling.
BUG=chrome-os-partner:24037
BUG=chrome-os-partner:22863
BRANCH=None
TEST=Built and booted with this config. Trackpad is firing interrupts
more than it should, but it appears to be a trackpad firmware
and/or configuration issue.
Change-Id: I00042b2ddba67d6bf23f0e7468d0719196e6f865
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176793
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4975
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
