| Age | Commit message (Collapse) | Author |
|---|
|
SD controller in CNL-PCH provides a ability to configure the behavior of
SD_VDD1_PWR_EN# as an active high or low signal. FSP provides an UPD
"SdCardPowerEnableActiveHigh" to control the same.
However, for platforms using SD_VDD1_PWR_EN# as active high, the SDXC
card connector is always powered and may impact system power. This is because
SD_VDD1_PWR_EN# does not de-assert during SDXC D3 or when SD card is not
inserted.
Workaround is to change the pad ownership of SD_VDD1_PWR_EN to GPIO and
force the TX buffer to low in _PS3. And restore the pad mode to native
function in _PS0.
Hence add a Kconfig option to update the UPD, which the board can select
based on how the SD_VDD1_PWR_EN is implemented on it. And, the workaround
gets applied based on this config.
BUG=b:123350329
Change-Id: Iee262d7ecdf8c31362aec3d95dd9b3e8359e0c25
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31445
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a function in gpio ASL library to enable/disable pad Rx/Tx Buffers.
BUG=b:123350329
Change-Id: I6c40d79debb61b0c4e96e485b410d446b77d9cf6
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
SD_CD# in Cannonlake PCH is also wired to an internal virtual GPIO,
expose that GPIO for kernel to configure card detect IRQ.
BUG=b:123350329
Change-Id: I566cc2eb11dc257366897a1efba905b8ddcf493d
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Adapted from Chromium commit 5351dc0d
[Edgar: To set the RX ODT limit and dram geometry with RAMID detection]
Several cyan variants require memory init parameters be passed to FSP
for handling of specific Micron modules; without these, RAM init will
fail when loading training data from the MRC cache, and boot will halt.
This was missed when I upstreamed edgar along with the other cyan
variants, so add the required memory init parameters for edgar as per
its source Chromium branch.
Test: build/boot on edgar board with affected Micron memory
modules, verify boot successful with populated MRC cache.
Change-Id: I6a2bc30b54ff1a17c854a90dfcb2308d27ee2be7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31615
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support measured boot, drop VBOOT_RETURN_FROM_VERSTAGE.
The SoC has enough CAR space to support a separate verstage.
Tested on OpenCellular Elgon.
Change-Id: I18022000f6f05df89d3037896ef627070bfcca06
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31568
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PMC initialization on Cannon Lake happens earlier in the boot sequence
than other SoCs because FSP-Silicon init hides PMC from PCI bus. As
ACPI disabling was done as part of PMC init, it was being called
earlier than what other SoCs do. This resulted in a different order of
events for some drivers e.g. ChromeOS EC. In case of ChromeOS EC, it
ended up clearing EC events (which happens as part of ACPI disabling
in SMM) before logging any events of interest that happen during
mainboard initialization.
This change moves the call to disable ACPI to pmc_soc_init just like
other SoCs to keep the order of events more aligned.
BUG=b:126016602
TEST=Verified that EC panic event gets logged to eventlog correctly.
Change-Id: Ib73883424a8dfd315893ca712ca86c7c08cee551
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
dmesg report wrong asl compiler version as this value wasn't
in hexadecimal:
FACP 0x00000000CFB5D6C0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 01341407)
DSDT 0x00000000CFB5B280 002436 (v02 COREv4 COREBOOT 20190112 INTL 20190215)
This error was introduced on change-Id: I91b54b43c8b
Tested on 945G-M4 board, dmesg now report the right value:
FACP 0x00000000CFB5D6C0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190215)
DSDT 0x00000000CFB5B280 002436 (v02 COREv4 COREBOOT 20190112 INTL 20190215)
Change-Id: I5494bb1e7af17eba0c2da8a0c2eb9e40ffd8d065
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31612
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Each smbios entry should be followed with two null bytes. In other
structures it's done by adding `u8 eos[2]` extra bytes at the end, it
was omitted in type38 (IPMI) though. This change fixes this - tables
decodes nicely:
```
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: 32-bit Boundaries
```
Signed-off-by: Lukasz Siudut <lsiudut@fb.com>
Change-Id: I8efea9612448f48e23e7b2226aea2a9f3bc21824
Reviewed-on: https://review.coreboot.org/c/31482
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are functions defined on headers with no code written for. They
probably existed earlier, were removed and forgot in the headers. Remove
functions from headers if there's no actual code written for.
BUG=b:123564495
TEST=Build grunt.
Change-Id: Ia6a12e22a0944351c455dc2c3b534f09a258bd7b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Remove unneeded options, note where usbdebug is, reorder devicetree and
clean up dsdt.
Tested, board still boots.
Change-Id: Ice0eff7b9829816aff4d334f4ac4a2fb435a2fb0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1075e872e5cb1990bd330b88bb03322ab9338e86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch clarifies the definition of google_chromeec_command.
Currently absence of the definition isn't causing any problem because
wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an
interface which returns only negative error codes.
However, there is a chance that a new wrapper API will be addedl which
check 'ret < 0' to catch errors, assuming other interfaces behave the same.
Or existing wrapper APIs will be broken as soon as they're compiled for
another interface.
BUG=chromium:935038
TEST=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f
Reviewed-on: https://review.coreboot.org/c/31613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
On flapjack, retrieve the board information via CBI interface.
Also reserving 0x2 sku_id for the case of un-provisioned board as this is the id
used prior to the readiness of cbi.
BUG=b:123676982
BRANCH=kukui
TEST=provisioned cbi info and verify the sku_id.
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Iad7a52df38e2045abbdded8ba0a1f1544de961fc
Reviewed-on: https://review.coreboot.org/c/31586
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Cavium DRAM init might use the RNG for pattern generation.
Initialize it before running DRAM init.
Tested on OpenCellular Elgon.
The RNG generates non identical numbers.
Change-Id: I886f920e9941793fb76b56cc5a24a42e23b082e0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch change i2c source clock to TOPCKGEN.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on kukui.
Change-Id: I49e0acda22dba449d0873a95ba5fae79a9cef569
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Denote appropriate reserved groups as virtual GPIOs in Cannonlake LP/H SoC.
Change-Id: I4da161b91f83749b0ae29b387b5c99c1c3f706d8
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
coreboot performs MP-Init in a parallel way. That leads to the fact
that the order, in which the CPUs are woken up, can vary from boot to
boot. The creation of the MADT table just parses the devicetree and
takes the CPUs reported there as it is for creating the single local
APIC entries. Therefore, the OS will see different order of CPUs.
There are CPUs out there (like Apollo Lake for example) which have
shared caches on core-level and if the order is random this can end up
in assigning cores to different tasks or even OSes (in a virtual
environment) which uses the same cache. This in turn will produce
performance penalties across these distributed tasks/OSes.
Though there is a way to discover the core- and cache-topology it will
in the end be necessary to take the APIC-ID into account. To simplify
it, one can achieve the same output by sorting the APIC-IDs in an
ascending order. This will lead to the fact that CPUs that share a given
cache will be reported right next to each other in the MADT.
Change-Id: Ida74f9f00a4e2a03107a2124014403de60462735
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add an implementation for Bubble sort. For now, only integers can be
sorted in an ascending or descending order. It can be later simply
extended to cover other datasets like strings if needed.
The reasons for choosing bubble sort are:
* it is a simple algorithm
* bubble sort is stable, i.e. it does not exchange entries which are not
needed to be sorted as they are already in order
Change-Id: I2c5e0b5685a907243b58ebe6682078272d316bf6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Rather than attempt to maintain patches against upstream Tianocore, use
MrChromebox's coreboot framebuffer branch as the default build target.
Rework the Makefile to default to MrChromebox's coreboot_fb branch, but
also allow for aribitrary commits from upstream Tianocore to be used
as build targets.
Ensure the branch is synced on each build, as long as working directory
is clean, and that switching between commits or trees is handled sanely.
Eliminate TIANOCORE_MASTER as a selectable build target, since unpatched
it is unlikely to boot on any device. It can easily be specified via
the 'revision' option if desired.
Test: build for the default stable target, for upstream/master
as the specified revision, and for an arbitrary valid commit hash.
Change-Id: I4a83db3cd64c7d5b652c6e95780d10051f143e88
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add cometlake specific PCH IDs
Change-Id: I18dda48cee29213aa66c0ccddf3da31f0f489d2f
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SMI handler on qemu returned early, due to missing SMM-Revision
Level support.
Add the ID qemu uses, which is AMD64 compatible for qemu-system-x86_64.
Fixes booting tianocore payload with SMM variable store on qemu.
Change-Id: I978b94150cfc49a39c2a0818eb14a649850e451d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change default VESA/native framebuffer mode (needed for bootsplash and
graphical framebuffer console) from 117h (1024x768 64k-color (5:6:5))
to 118h (1024x768 16.8M-color (8:8:8)) mode.
This provides console output at Lenovo G505S even if e.g. GRUB is the
payload, while it is unlikely to cause any downsides for the other
boards.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ia348199bbd430532b1399706dd84490c9680b5f5
Reviewed-on: https://review.coreboot.org/c/31595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
enum contained redundant names and wasn't exhaustive anyway.
Change-Id: I4d74ff61c555c5953932efbd7edccfd3157cb5be
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Upstream intelmetool is out of date; I suggest I archive it
instead of trying to merge coreboot's changes into it.
However I would like to preserve the licensing of files in the tool
as GPLv2+ where possible instead of GPLv2-only.
Change-Id: I47b1ff2734f54c65f4214b39244bd868ef44b83c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/31587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Move ecam0_get_bar_val into the common folder and make it public.
Compile it for romstage and ramstage.
To be used by romstage PCI code.
Tested on OpenCellular Elgon.
Change-Id: I18b1ede56795bf8c1f9476592291b8ea610eccd4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Issue spotted using IASL 20190215 on mainboard GIZMOSPHERE_GIZMO2:
"Object is created temporarily in another method and cannot be accessed"
Change-Id: I1e4ca2c765083db3a27e415d3a69bef0912a606b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This change fixes the power status events for AC and battery
events from the EC. The register that was being used is not
returning the expected information.
BUG=b:125472740
TEST=enable ACPI debug in the kernel and verify that AC and
battery insert/remove are detected properly.
Change-Id: I15f71fcf0ca6aa9438e951865787c9fc273792d8
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
No reason to keep this rule in per-family directory.
Change-Id: I6bfc9a277674077774c4cb398f8add5e4fa99c69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31509
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Third parameter ConfigPtr of the callout is of type
AP_EXE_PARAMS and needs to be passed back to AGESA
with AmdLateRunApTask() call.
Change-Id: I1dad64b955b53bd19363737665235f95aa3d451e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/27277
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On every call of hwilib_find_blocks() the CBFS file will be mapped and
the contents are parsed to get the offsets for every single block. This
is not needed if the CBFS file name is the same for the different calls.
This patch adds a storage for the currently opened CBFS file name in
CAR_GLOBAL and checks on each call if the file to open is already open.
If yes, the file will not be mapped again which saves execution time.
Test=Booted mc_tcu3, mc_bdx1 and mc_apl1 and verified that hwinfo.hex
is only mapped once across several following hwilib_find_blocks() calls.
In addition a test was done to ensure that files with different names
get mapped correctly.
Change-Id: Id69e0f6c914c2b8e4551fd8a4fb7d452d176afb3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
The change bcd84fe "mb/emulation/qemu-i440fx: change file handling"
introduced a regression where it loads only 4 bytes of the
ACPI and SMBIOS table, instead of the whole table.
Load the whole ACPI and SMBIOS table.
Tested on Qemu using GNU/Linux.
Change-Id: Ibacbf7caab9be5f181c12e9dd39a2893b13cf6c9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31593
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add cometlake specific SA IDs
Change-Id: I1fbbab8a7797b36a9eacbd1c6a0644466f2fe6b1
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Add cometlake specific CPU IDs
Change-Id: I75d5b82524c9df1402abf6659d62dbc716c28c30
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: I3500a648631c91f3a0812c7e661440743ed6a1e1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
USE_FSP_REPO used to rely on SOC_INTEL_COMMON_CANNONLAKE_BASE which was
getting selected for cometlake soc also. Since FSP is not yet upstreamed
for cometlake, compilation was failing due to FSP was not found.
So limiting USE_FSP_REPO option to coffeelake and whiskeylake soc only
and excluding for cometlake.
Change-Id: I5e5d5a9fdf3f5d3e79922e97719e8491aa514cef
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/31530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
CB:31547 fixes few whitespace error. Here is few more whitespace clean up.
Change-Id: I69c12a5da4feb48b2bc23874332ab341a559f6e6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: I9cc3dc51764f24b986434080f480932dceb8d133
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For some reason, wake does not currently work from GPP_D21, but IRQs
are working fine from that gpio. Thus, we have to switch IRQ to
GPP_D21 and wake to GPP_A21, which was previously used for IRQs from
the trackpad. Additionally, we need to use two gpios for irqs and
wake source at the moment because of b:123967687, where FSP is locking
down PCR and configuring ITSS. We need to configure the wake source
gpio as inverted and the IRQ gpio as non-inverted until the bug is
resolved.
BUG=b:121212459
BRANCH=None
TEST=run evtest with trackpad
Use trackpad with ChromeOS UI and make sure it reacts as expected.
Run powerd_dbus_suspend and press trackpad and make sure DUT
wakes.
Change-Id: I7b236136befc05c6586d9ba69185ed4b5d385273
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UART PCI driver in cavium/common/pci.
Tested on opencellular/elgon.
The UART is still initialized and usable in Linux.
Change-Id: I0fa2f086aba9b4f9c6dba7a35a84ea61c5fa64e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The latest rev. of the atlas board moves the WiFi wake source from
WAKE# to GPP_B7. The original GPP_A0 in the device tree is just
wrong. This also reconfigures DW1 to the GPP_B group so we can use
GPP_B7 as a wake source.
GPP_B7 is still configured as a no-connect in gpio.c, so this doesn't
actually enable WiFi wake. We'll follow up with another patch to set
up GPP_B7 properly on boards that support it.
BUG=b:122327852
BRANCH=none
TEST=atlas still boots
Change-Id: I1816500dd0ab6186fd51aa6945faf73d00c152fe
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix up the logic of when to include VBOOT2_WORK symbols on x86,
which are only needed when VBOOT_STARTS_IN_BOOTBLOCK is enabled.
Also correct the value of the __PRE_RAM__ macro in the case that
VBOOT_STARTS_IN_ROMSTAGE is selected. In this case, DRAM is
already up and verstage should not be considered pre-ram.
BUG=b:124141368, b:124192753
TEST=Build locally for eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ie51e8f93b99ab230f3caeede2a33ec8b443e3d7a
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/31541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
VBT on Intel(R) systems is available via sysfs as
/sys/kernel/debug/dri/0/i915_vbt
However the size of this file reads as 0 causing
intelvbttool to fail. This patch implements incremental reads
with realloc for such cases or whenever the file size is not
available (e.g. reading from stdin).
After this patch is applied, intelvbttool can be used as follows:
sudo intelvbttool -f /sys/kernel/debug/dri/0/i915_vbt -d
Change-Id: I5d17095a5747550b7115a54a7619b7294a846196
Signed-off-by: Alex Feinman <alexfeinman@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/31531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We experienced booting issues during FSP-M phase. Applying fix that was
introduced for wedge100s - 817994c1bec (mb/ocp/wedge100s/romstage:
Workaround broken platform state) - helped and systems started to
boot properly.
Signed-off-by: Lukasz Siudut <lsiudut@fb.com>
Change-Id: Ibfbe9d19c7413098c56d1b6131640097fdf731ab
Reviewed-on: https://review.coreboot.org/c/31435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
devicetree
Tested on system76 galp3-c
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I3aa8990a335e413628c016007ebabf7142aef80d
Reviewed-on: https://review.coreboot.org/c/31535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a function in gpio ASL library to set pad mode.
BUG=b:123350329
Change-Id: I6c683f27ddffc3132001706d1694c71bb5664577
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/31444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Updating from commit id a32c930e:
2018-12-28 16:14:08 -0800 - (futility: updater: quirks: Support special released SNOW RO)
to commit id 1e177741:
2019-02-14 05:27:16 -0800 - (vboot: rename VB2_DISABLE_DEVELOPER_MODE)
This brings in 11 new commits.
Change-Id: I59d83de49006a6d081b206716002697d39099aa4
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/31542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When <symbols.h> was first introduced, it only declared a handful of
regions and we didn't expect that too many architectures and platforms
would need to add their own later. However, our amount of platforms has
greatly expanded since, and with them the need for more special memory
regions. The amount of code duplication is starting to get unsightly,
and platforms keep defining their own <soc/symbols.h> files that need
this as well.
This patch adds another macro to cut down the definition boilerplate.
Unfortunately, macros cannot define other macros when they're called, so
referring to region sizes as _name_size doesn't work anymore. This patch
replaces the scheme with REGION_SIZE(name).
Not touching the regions in the x86-specific <arch/symbols.h> yet since
they don't follow the standard _region/_eregion naming scheme. They can
be converted later if desired.
Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The BL31 on RK3399 is split into multiple segments... the majority goes
into DRAM, but small parts must be put into SRAM and PMUSRAM. With
CB:31123 only the DRAM part was added to memlayout, so the SRAM parts
will not be correctly marked in bootmem and BL31 loading fails the
selfload check. This patch adds the remaining regions to fix the
problem.
Change-Id: Ia0597216c08512c47361a1dc0beb34d022a8994f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ting Shen <phoenixshen@google.com>
|
|
Change-Id: I33a50e9fc90162c7cb2aa7fbc3887efe9c6ebcde
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This reverts commit 3afb84a24583f5dee9fb407f11b32253d59392bf.
Reason for revert: This is causing issues with the PCIe link
and the system is unable to enter S0ix. Until it can be fixed
in coreboot revert the change here that is not working properly.
BUG=b:124264120
Change-Id: Ia20da9ab560ca35950b4a916667f51e0f541b382
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31559
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EC software sync had been disabled because BIOS was not bundling a
useful EC image. This is no longer required. This CL removes that
change so EC software sync is enabled by default.
BUG=b:124208414
BRANCH=None
TEST=Tested with a system that have a different RW image and verified
that this image was overwritten to the one bundled in the BIOS and
that the EC was running its RW image.
Signed-off-by: Scott Collyer <scollyer@chromium.org>
Change-Id: Ic1ffdb62e9fa2cacb3296cb3807082f23e171ab5
Reviewed-on: https://review.coreboot.org/c/31537
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without newline, if IA32_FEATURE_CONTROL already locked, next
console line will be concatenated. If run on a multiple CPUs,
you get multiple lines concatenated.
Change-Id: I5b73ae4cb045973fa3ce07f4d93fda0caadf78eb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The setting of these registers are only for i2c pin.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on Kukui
Change-Id: I518ca07645fe55aa55e94e4f98178baa0b74a882
Signed-off-by: jg_poxu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/30974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Old location caused spurious error messages when
called from APs, where timestamp_add_now() should
do nothing.
Moving the test also makes get_us_from_boot() usable
from APs (assuming cache coherency).
Change-Id: Ice9ece11b15bbe1a58a038cda3d299862e6f822b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31524
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For CFL and WHL, Microcode is being loaded from FIT. Both
supports the PRMRR/SGX feature. If This is supported the FIT
microcode load will set the msr (0x08b) with the Patch id one
less than the id in the microcode binary. This results in
Microcode getting reloaded again in bootblock and ramstage.
Avoid the microcode reload by checking for PRMRR support.
CFL and WHL CPU die are based on KBL CPU so we need to have
this check, where CNL CPU die is not based on KBL CPU so
skip this check for CNL.
BUG=b:124126405
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Change-Id: I3311a7413d27044f9c819179e5b0cb9a67b46955
Reviewed-on: https://review.coreboot.org/c/31492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The default mapping was probably copy-pasted from a random
board and disabled some interrupts (by implicitly clearing
some register bits).
We provide a new default mapping with some reasoning, that
tries to be most compatible (i.e. avoids to use PIRQ E-H
that are not shareable on some boards).
The following functions had their interrupt pin disabled
before:
o SATA 2 (explicitly, no board seems to enable the device)
o PCIe Root Port #4, #6-#8 (probably by accident)
PIRQs used before this change: A-D, F and H. After this
change: A-D.
Change-Id: I33f82702ea9c1b9c22ce14f01ee630dbf6203362
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31498
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I91b54b43c8bb5cb17ff86a6d9afa95f265ee49df
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I142f08ed3c2704b8fde6d176f23772f5d6b33e85
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Error spotted using IASL 20190215:
"Object is created temporarily in another method
and cannot be accessed"
Change-Id: I139c5c7b33671e7ed0c04c06fb290e001e57a687
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Error spotted using IASL 20190215:
"Object is created temporarily in another method
and cannot be accessed"
Change-Id: I7da9dcd68f5eec6383de7370bc8ab35f96a90c06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We used .aml as the file extension for preprocessed ASL code. That
file gets overwritten with the compilation results, fix that.
Change-Id: I11a03dfbcebb0fd762da7b27862a7bdb9a581b92
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Variants of Hatch need to accommodate single channel DDR. Also,
removing const modifier as we'll need to set these fields
incrementally now. For the single channel configuration, we set
MemorySpdPtr10 to 0. For the dual channel configuration, we set
MemorySpdPtr10 to MemorySpdPtr00.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Change-Id: Ice22b103664187834e255d1359bfd9b51993b5b6
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31262
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch feeds PsysPmax setting to FSP through UPD and adds a
psys_pmax member in chip information so that we can set PsysPmax
through DT. The PsysPmax needs to be set correctly mapping to maximum
system power. Otherwise, system performance would be limited due to
the default PsysPmax setting in FSP is only 21W.
BUG=None
BRANCH=None
TEST=Set psys_pmax to an example value eg 101 in DT && put debug code
in FSP to print the PsysPmax value before sending to Pcode, ensure
the setting is correctly programmed.
Change-Id: Ia88ea17bc661a388c5b9bc3e59abc27c9f262977
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/31505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the _DSM method 5 and 6 for entering and exiting S0ix.
The _DSM method gets injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ia908969decf7cf12f505becb4f4a4a9caa7ed6db
Reviewed-on: https://review.coreboot.org/c/31101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The requirements read a bit as if we only encourage coreboot experts to
try to take on these projects. These requirements should be understood
as "this is what you'll need to learn", hopefully guiding interested
people in picking a project that suits their interests.
Change-Id: I43b6e2e0df5f00e1ded8d14cee8c771e3f595ce7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31480
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iaccb5ca5606b83a4b37930b4399ddcf9eddd494b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It's causing too much noise during review of register tables.
Change-Id: Iae6cd4454c5ed84b5fe0ea5f8a244e2a2fa13407
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31367
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8997910ff003a4d0c97656cb1e9a4342230ac51a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Static scan-build indicates a possible invalid return from function
spi_flash_cmd_erase(). The root cause is because the scan believes it's
possible for offset to be above the end address in the first pass, thus
not setting a value for variable ret. Assign initial value of -1 to
variable ret to make checker happy.
BUG=b:112253891
TEST=build grunt
Change-Id: If548728ff90b755c69143eabff6aeff01e8fd483
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The current implementation was designed for x86_32, so don't
attempt to compile it on x86_64 until it is fixed.
Fixes compilation error on x86_64.
Change-Id: Ibd87dc2979f6d45a988119c06c5f9e61b3e86171
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add HrP 9560 module device ID (0x02F0) into device/pci_ids.h file.
TEST=HrP module is getting detected during PCI enumeration
Change-Id: Id0a8a7a8cf7c665bd49f27b1c50d41d26a3274ce
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-on: https://review.coreboot.org/c/31475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Every printk() call already does console_tx_flush()
so there should not be anything in transmit buffer
when we return from console_init().
Change-Id: Iff2927c02d2c8031907620a056782bb014f20162
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31369
Reviewed-by: Xiang Wang <wxjstz@126.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After adjustment on Sarien EVT
Touch Screen CLK (Elan): 389.7 KHz
Touch Screen CLK (Melfas): 377.7 KHz
Touch Pad CLK: 385 KHz
BUG=b:122657195
BRANCH=master
TEST=emerge-sarien coreboot chromeos-bootimage
measure by scope with sarien.
Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com>
Change-Id: I53b60354e5a7a0ace8efb677775c0a9f8779061d
Reviewed-on: https://review.coreboot.org/c/31476
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
New whiskeylake v-0 stepping have changed the graphics device id from
0x3EA0 to 0x3EA1 for celeron, so declare that in common code. Also the
CPUID was changed from 806EB to 806EC, include that as well.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: Ief5213a96507124b90f8dd2eeea2f6bf43843dc6
Reviewed-on: https://review.coreboot.org/c/31433
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2b8a0ebda3c8fa7d1777a6f0628fd99d73a0d341
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Follow b:123461432#5 to update GPIO H3(CNVI_EN#) for DVT1.
Update setting GPIO H3 to output and low level.
BUG=b:123461432
TEST=Built and tested on sarien system
Change-Id: I6a56df9a7bf75f49133a646312ae5093c2652698
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/31412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Follow thermal table (b:123383634 comment#1) for EVT1 tunning.
BUG=b:123383634
TEST=Built and tested on sarien system
Change-Id: I22908e4bf39aedb8cf31a9060084f6f36bff56ca
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/31170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the common VMX implementation, and set IA32_FEATURE_CONTROL
lock bit per Kconfig *after* SGX is configured (as SGX also sets
bits on the IA32_FEATURE_CONTROL register).
As it is now correctly based on a Kconfig, the `VmxEnable` devicetree
setting vanishes.
Test: build/boot google/[chell,fizz], observe Virtualization enabled
under Windows 10 when VMX enabled and lock bit set.
Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29682
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Intel SOC can only shadow the top 16MB of SPI into memory so
in order to make it easier to access the NVRAM region with memory
mapped interface move it above the much larger RW_LEGACY region.
I tested to confirm that this region can now be read via MMIO
interface and does not need to use the hwseq SPI controller.
Change-Id: Iafacb01eec07beaf474b6a1f2b36a77117e327da
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Create VR settings configuration as per board design.
BUG=N/A
TEST=Build and boot up into sarien platform.
Change-Id: Ic196fd80e5211bd5146158d4d340b52c850a4e62
Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-on: https://review.coreboot.org/c/31404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This change enables mode change as a wake source for S3.
BUG=b:124132058
Change-Id: I95b1eac800858ab17cdf69bdd3f2c5828516c184
Signed-off-by: Mengqi Guo <mqg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:121354442
TEST=None
Change-Id: I348c7106772eecd513baf9abe60ef19008d0ba4d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/31424
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5569e61c2a3a64cf353afe3195eca82709362305
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31218
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update dptf for arcada EVT.
BUG=b:123924662
TEST=Built and tested on arcada system
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: Ieed8021b83776fdb6320ff89b57c8d2747667fd5
Reviewed-on: https://review.coreboot.org/c/31331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
There seem to be enough users of the Skulls images to have the project
listed in our docs.
Change-Id: I5a8f24005fec87d53af7ad53370cb6a704378622
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-on: https://review.coreboot.org/c/31463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ie9daa70c56552cccfe28e9a4903f87d43221375e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We need disable touch screen device on laser SKU ID 6.
BUG=none
TEST=according to sku_id (Laser(convertible): 5, Laser14(clamshell):
6, Laser14(clamshell + touch):7) distinguish whether disable touch
screen device.
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6953c35a5e8c93d88fe63362156faa351e8ee71f
Reviewed-on: https://review.coreboot.org/c/31428
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A couple people discussed recently how it's a shame that on some
architectures we can bring up a device but then have nothing to do with
it afterwards. Having payloads to choose from would help a lot there.
Change-Id: Ia66f22947d09afe3076cc2ee12f5b652fe80fc3a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Extended BIOS ROM Size field.
Change-Id: Iec35c8c66210f0ddc07a2ca6f976a1f8fc53037d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I4e466614d0a9e8c89f298594a5785af775b22a95
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Change-Id: I362292e95557586e0e24a62a12a9ccc98143ef9c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Adding the Kernel Address Sanitizer feature to coreboot would help to
find bugs.
Change-Id: If00010e81147ec50e037678230df17c6888e40a2
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/31414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The moved functions are only about locating and loading
the refcode blobs. Separate them from the actual calls
into the blob. Eventually previous binaryPI blobs should
be unified to share same loader code.
Change-Id: I68885e7f855b195c178e746c8f3f0f49166d0def
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I943863587dff6db72d12673bc30ea46f4fd4b66f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable DPTF functionality on hatch platform.
Change-Id: If9ef74364616f95b27b73c39fea42d2623d78ae2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/31276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I68a8515adf5b29a080f8c5c5b7a96b28bca74676
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
There are typically two configurable oscillator outputs available on APUs
or FCHs. Convert the enable function to work with either one.
BUG=b:none.
TEST=Build and boot grunt.
Change-Id: I4b89b1e3b7963472471e34897bdd00176dbdb914
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/31386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Replace all instances, where 0 is used by the macro/define
`ACPI_FADT_LEGACY_FREE`.
Change-Id: I226b334620e0cdafc7639c7a76ea3a523ae53a74
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/31289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
