| Age | Commit message (Collapse) | Author |
|---|
|
Creates a common asl include file for PCIe power state methods. This
allows ports to be enabled independently.
BUG=None
BRANCH=None
TEST=None
Change-Id: I7b1cf4e14ebdfe9ecc7131dfe47c70ed7e2c3dc5
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/25532
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GLK Octopus uses PCIe root port #3 (PCIe ID 13.0) for discrete PCIe
wifi card.
BUG=None
BRANCH=None
TEST=Use Stone Peak discrete wifi card and test s0ix.
Change-Id: I8a064c5d97e4765bd97ec560c89b207b574b1fa1
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/25638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
APL uses PCIe root port 1 (PCIe ID 14.0) for discrete PCIe wifi card.
BUG=None
BRANCH=None
TEST=Use Stone Peak discrete wifi card and test s0ix.
Change-Id: Ia81722f4533916fe93009a73d86765e5de9dab08
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/25637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Displaying the whole receive enable procedure is very verbose should
only be done if CONFIG_DEBUG_RAM_SETUP is selected.
Change-Id: Ib568621e6d044624c1c0aeb6fb08945f561395c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
During raminit a lot of procedures need to be done for each bytelane.
Change-Id: Ib9a30ffabaf5c845e962e3e79cf4a20faa1d9857
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This replaces magic values by macros and adds some comments to improve
readability.
Adds a convenient function to fetch the test address of a rank.
Also fixes the temporary memory map by changing a write to MCHBAR
0x100 to 0x110, since this is what vendor does. (No difference
observed thus far)
TESTED on DG43GT
Change-Id: I58923e4a8a756f4ae65f759e7d46e03fad39fab7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
This patch pushes these large default delay tables to a different file
to reduce cluttering up the actual raminit source. While doing so it
also uses more but smaller arrays and also adds the respective default
delays for DDR3 which are not yet used in this patch.
This patch add a function to set the read DQS delays instead of just
programming magic values. (This will prove useful for DQS read
training)
To prepare for adding trainings on the delay values it stores these
default delays in the sysinfo struct to program those. Later when
trainings are implemented those trained values will be used instead of
these safe default values, via using the cached sysinfo in 'mrc'
cache.
TESTED on DG43GT (still works fine)
Change-Id: I0e3676e06586ea84fc0729469946dbc9a8225934
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Stores information obtained from decoding dimms and receive enable
results for future use.
Depreciates using rtc nvram to store receive enable settings.
A notable change is that receive enable results are always reused, not
just on a resume from S3.
This requires cbmem to be initialized a bit earlier, right after the
raminit finished to be able to add the sysinfo struct to cbmem which
gets cached to the SPI flash in ramstage.
TESTED on Intel DG43GT with W25Q128.V. With 4 ddr2 dimms time in
raminit goes from 133,857ms (using i2c block read to fetch SPD) to
21,071ms for cached results.
Change-Id: I042dc5c52615d40781d9ef7ecd657ad0bf3ed08f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I9972b138c6dd2a289880c4ec8b3fe64fc3baa66b
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25545
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The commit enables DPTF function. The DPTF parameters are provided by
thermal team.
BUG=b:72974136
BRANCH=poppy
TEST=emerge-nami coreboot then check the parameters in DPTF ui tool
Change-Id: I9b7ae34ee64f19ef783a8c1571831b2293105a18
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Because thermal table is not included the values of DPTF_TSR0_ACTIVE_AC5
and DPTF_TSR0_ACTIVE_AC6 from internal nami/vayne thermal team.
Add conditional compilation in _ACx methods if DPTF_ENABLE_FAN_CONTROL
is defined in the dptf.asl.
BUG=b:72974136
BRANCH=poppy
TEST=emerge-nami coreboot and booted on nami board.
Change-Id: I3e36ce94f714ff13f8ccee65992d7a9c7e0bb5b2
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25614
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add more verbose error message for common problems on modern
operating systems, like Secure Boot and CONFIG_STRICT_DEVMEM.
Change-Id: Ie3361910d48271bcc2cd3b4b74937fbc5df0a176
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
* Fix broken bootguard report on Intel ME 9.5+
* Fix broken debug statement
* Add additional rehide_me()
* Move last rehide_me()
Tested on Lenovo T470p. It shows correct BootGuard state:
Verified & Measured Boot.
Tested on Lenovo T430. It shows correct BootGuard state: Disabled.
Change-Id: Ib6c49ee39dd9962a4981e7de19b1c98c753f2944
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Only try to unhide MEI if the PCI device wasn't found and
probe for RCBA before trying to use it.
Allows to run the utility on Skylake and newer hardware that
do not have RCBA any more.
TODO: Use sideband interface to unhide MEI.
Change-Id: I7926aa80b132d5be9fece0724516701d74dd4d3d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Don't crash if mapping MEI PCI memory fails.
This can happen if CONFIG_STRICT_DEVMEM is enabled.
Change-Id: I33c75a7cccb4cefaa26f70aed4bdc4bd620cdad0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Copy script from Linux added in commit 7683e9e5 (Properly alphabetize
MAINTAINERS file) by Linus Torvalds.
> This adds a perl script to actually parse the MAINTAINERS file, clean
> up some whitespace in it, warn about errors in it, and then properly
> sort the end result.
>
> My perl-fu is atrocious, so the script has basically been created by
> randomly putting various characters in a pile, mixing them around, and
> then looking it the end result does anything interesting when used as
> a perl script.
Change-Id: I2eb4e3f9863d0fe242fb690f1121842c80d72d6a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/20742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
util/lint/lint creates a file using mktemp.
mktemp on OpenBSD requires at least 6 X's, while only 5 are in the template.
Change-Id: I0b80214dd83d21e12e16a5002c68127a7ca2e41b
Signed-off-by: Piotr Kubaj <pkubaj@anongoth.pl>
Reviewed-on: https://review.coreboot.org/19745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
OpenBSD needs the same includes as NetBSD. It also doesn't have x86_64_iopl
function, but amd64_iopl.
Change-Id: I28273d4d87a3a77cf35412a0695325c0535e42e5
Signed-off-by: Piotr Kubaj <pkubaj@anongoth.pl>
Reviewed-on: https://review.coreboot.org/19741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Certain TPMs (observed on Infineon SLB9635 installed on revolve 810 g1)
seem to need some delay between tis_wait_valid() and
tis_has_valid_data(), or tis_has_valid_data() may invalidly return 0,
ending the loop immaturely with some bytes left unread, and fail to
pass the check below, causing the current command not finalized by
tis_command_ready(), and blocking any later tis_wait_ready().
This time the added delay is controlled by a Kconfig option
TPM_RDRESP_NEED_DELAY.
Change-Id: Ic2a2f252e72a0bbce51e2863f8e46647b1570ba5
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/25322
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This information is not spew but useful to users.
Change-Id: I195c6913b7f0b96680b433ff3251aebb7e0f70f3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I4251071fc8d41a923b4e12de214670764097d47c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This will enable crossystem to access WP GPIO
BUG=b:78009842
TEST= wpsw_cur in crossystem reads the correct gpio
Change-Id: Iedd0057d6bdfd5a666ff282bc784f7b98e8c96e8
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Tested with a pair of GSkill F3-1866C9-8GSR.
This makes sure in particular that we honor the CMD rate requested by
the XMP profile. This memory kit needs a CMD rate of 2 to be stable at
DDR3-1600 and up, even though it passes training at 1.
Also respect requested CWL to match vendor firmware and for a potential
increase in performance. The tested kit requests a tighter value than
the per-frequency table provides and has shown to be stable using that
setting.
Change-Id: I634bed764d76345c27f02a2fae5abb2d81b38fd9
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-on: https://review.coreboot.org/25664
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Fix offsets for supported CAS latencies
- Add support for reading CWL and CMD rate from the profile
Change-Id: Ie4f545ed1df92c146be02f56fea0ca9037478649
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-on: https://review.coreboot.org/25663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The table in Documentation/acpi/gpio.md is currently detected as
free-form text (at least by GitHub and recommonmark), instead of a
table. Wrap it in a code formatting block to preserve the manual
formatting.
Change-Id: If460d7f1ba1a6198d949886f0f55fd6254bc2f7a
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Only the document title should be a top-level heading ('#'). Everything
else should be a second- over lower-level heading ('##').
Also remove the '#' sign at the end of heading lines. "# Foo #" is
mentioned as a valid syntax variant at [1], but it's quite uncommon.
[1]: https://daringfireball.net/projects/markdown/syntax#header
Change-Id: Ida16c3ecaa22e8439007673cb943d04952e19471
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The latest public BKDG (3.6) releases some previously undefined (reserved)
bits. Fix these definitions, including the header file where they are
defined.
BUG=b:77940747
TEST=Build and boot grunt.
Change-Id: Icb5334110248d7806421200a161fa3befefcea8a
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25665
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The latest public BKDG (3.6) releases some previously undefined (reserved)
bits, also some bits were wrongly named (possibly copied from previous chip).
Fix these definitions, including the header file where they are defined.
BUG=b:77940747
TEST=Build and boot grunt.
Change-Id: Ie8d3fcccb8443c1a6db828bdc2624778bad6ba9f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add SPD file for sdp hynix_dimm_H5AN8G6NCJR-VKC (ram id: 15).
BUG=b:77893710
TEST=Verified that the device with this memory part boots to OS fine.
Change-Id: I434d42ff12e6dae39e5676f36ba6cf00b3a48b06
Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add SPD file for sdp micron_dimm_MT40A512M16LY-075E (ram id: 14).
BUG=b:77930401
TEST=Verified that the device with this memory part boots to OS fine.
Change-Id: Ia44e70948e57c2f19664d874ae005ac39d748f92
Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In https://review.coreboot.org/25383 people were confused about the
ordering of bootmem calls w.r.t. when entries are exposed to the OS. To
alleviate this add a notion of bootmem being initialized. In addition to
that, only mark bootmem initialized when bootmem_write_memory_table() is
called. Any other calls to bootmem before that will report an error on
the console.
Change-Id: I5bc31f555038ccabb82d902c54f95858679b1695
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also base the FSP/GOP related bail-out on the correct Kconfig option
to allow adding a VBT along with libgfxinit.
Most things should work, what doesn't is backlight control because
coreboot misses the settings (moved to FSP and need backporting).
Also, Kaby Lake is still unsupported.
TEST=Booted yet to be upstreamed Skylake-S port (Kontron/bSL6) both with
text and linear framebuffer mode and viewed a FILO menu.
Change-Id: I79fbfed7732cf02d054530ea7ec0d34de32836ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
The EC should wake the system from S3 when the AC connector is plugged.
BUG=b:77602394
TEST=verify resume on insert with Grunt
Change-Id: I4bcaef2fe75283aaa6260b5b9efd408ff4b05f4c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove unused header files in
src/vendorcode/amd/pi/00670F00/agesa_headers.h. This is a first
clean up. Hopefully more headers will be removed in other commits.
Header files cannot be removed at this time. They are used by files in
vendorcode/amd/pi/00670F00/.
BUG=b:77944801
BRANCH=none
TEST=build Gardenia and Grunt
Change-Id: I99b77f6ba41ded30122a01bbe709681312561436
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25644
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused AGESA header files from
vendorcode/amd/pi/00670F00/binaryPI/AGESA.c
BUG=b:77905293
BRANCH=none
TEST=build Gardenia.
Change-Id: Ic38424d489dcc37a4074159e33fca0d49c71f701
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
bt-pad-enable property is used by kernel driver to set
BT I2S PAD on ACP_BT_UART_PAD_SEL mux, for those platforms which
use these pins for BT I2S. By default the pins are set for UART.
BUG=b:72360151
TEST=Tested playback and capture on audio device connected to BT I2S
Change-Id: Id76bfa1fa1dde904f02a03b0c15986ecb1bbcc97
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-on: https://review.coreboot.org/25653
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As seen on ASUS P8Z77-V Pro
Change-Id: I9fce9a35174b5120f67c2345a0807db1b843eb48
Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com>
Reviewed-on: https://review.coreboot.org/25661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This makes FSP use the same baud rate as coreboot so that the user can
more easily change it without having to modify the FSP binary.
Change-Id: I0084aa9a0394ad7eabdd88809b66fc21a25ba316
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
APL and GLK have 39 address bits
Change-Id: I9b761492332c545c13a0594d8f5937ca84bc0699
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit aef0d6b0a7ec867ee29acf9e1c695be27626f239.
This commit can only pass far-end USB eye diagram but will fail on
near-end. Confirmed with Intel we should revert it.
Change-Id: I2eb1d5ddb05ca6bbf6512edf48e3e0d8396ce6a7
Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com>
Reviewed-on: https://review.coreboot.org/25651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On glk there's a 4MiB L2 cache all the time. Take advantage of that
by initializing a 1MiB cache-as-ram area.
BUG=b:72728953
Change-Id: Ia4e777a13607d8b70c05534b0a172f0ec6b04c51
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25645
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The pch_smbus_init() function contains code to enable clock gating for
the SMBus controller. Unfortunately this code is buggy and leads to a
hanging system with the latest microcode version.
The hang occurs as follows:
The clock gate register is mapped into RCBA space. After reading the
RCBA address from the LPC device config space no mask is applied to the
value (only bits 31..14 are valid while bit 0 is the enable bit). For
this reason the final address is off by one. The old microcodes at least
allowed this unaligned access to the RCBA space. With the latest
microcode this access leads to CPU hang.
Once this is fixed the next issue occurs: After setting the clock
gating bit for SMBus (bit 5) the SMBus controller disappears from the
PCI bus completely and hence no usage of it is possible anymore.
To fix this issue the clock gating code is completely removed as it was
intentionally meant to enable clock gating on the SMB_CLK line and not
the clock gating on the PCIe interface of the SMBus controller.
This issue is known already and was discussed on the mailinglist:
[coreboot] BDX-DE PCI init fail
https://mail.coreboot.org/pipermail/coreboot/2018-January/085908.html
TEST=Boot mc_bdx1 with microcode version M1050663_07000012.
Change-Id: Icb86f4516f8a6e72552a44618737e682b0fdef33
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/25652
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Required for other ACPI generators, like the one used for _ROM.
* Add ACPI code for PEG10/PEG11/PEG12/PEG60 and include it on all platforms.
* Add PCIe driver for PEG. The driver returns ACPI names for ssdt generators.
Needs test on real hardware.
Change-Id: I96835c43522580c95fd4f250c56bf9438e993bc1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22337
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on keyboard backlight in romstage to indicate that the system is
booting.
BUG=b:77921345
TEST=Boot grunt, keyboard backlight comes on.
Change-Id: Ib215b19ebdee2f8c4f431af775905eca42436d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/25636
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There wasn't previously a way for Stoney platforms to run mainboard
specific code in romstage. This adds an early call for configuration
and passes along whether the system is currently resuming from S3.
BUG=b:77921345
TEST=Build, verify that weak function implementation gets called.
Change-Id: Id94855e1084814ec37956e603cd093d70f01a559
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/25635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement uart_rx_byte
Change-Id: I5a33b3cd4b333fb244bc55747014a301021e25e0
Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com>
Reviewed-on: https://review.coreboot.org/25623
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to an accuracy issue on IMON in the IDT PMIC, the reported system
power consumption was higher than the actual consumption. To prevent
this problem, a logic must be implemented in mainboard_init(). This logic
consists of slope and offset as constants for Vcc and Vnn, which need
to be programmed by coreboot. This fix compensates for the accuracy
issue.
Change-Id: I77faf95951d03ac6ce97a6721dba6e8466122a25
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This reverts commit 70ba1b7e78930acca578114cdadcbcec367730e8.
This commit can only pass far-end USB eye diagram but will fail on near-end.
Confirmed with Intel we should revert it.
Change-Id: I6de44d5240393409d9ec5835a9de0c23453300f7
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25630
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI interrupt routing file routing.asl is not reflecting AGESA settings to
the NB Interrupt Routing Registers. The AGESA settings are:
Device self INTA INTB INTC INTD
GPP 0 23 0 1 2 3
GPP 1 24 8 9 10 11
GPP 2 25 16 17 18 19
GPP 3 26 24 25 26 27
GPP 4 23 3 0 1 2
HDA none 22 23 20 21
GBIF none 6 7 4 5
Fix the routing table, considering that NB IOAPIC starts at interrupt 24.
BUG=b:74104946
TEST=Build and boot to a modified grunt board to enable the emmc. Then used
"cat /proc/interrupts" to get active interrupts. Also checked IOAPIC
redirection registers, which are now being programmed.
Change-Id: I60847c46f3f938f9e97d7b323b27d20e36aa2d02
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update libgfxinit to current master. Changes include:
* a fix to decode the size stolen memory correctly on pre-SandyBridge
hardware,
* a PCI id based generation check, obsoleting the old check based
on PCH audio ids,
* some minor improvements around rarely used DDI ports (D and E), and
* added support for tiled and rotated framebuffers on Skylake+ hardware
(less interesting for coreboot, I guess?).
TEST=Booted kontron/ktqm77 (Ivy Bridge) and pending kontron/bsl6
(Skylake) both with text and linear framebuffers and observed
FILO's prompt showing up.
Change-Id: I9a3c35c60b9edf8775f3a489df7577092910e127
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25453
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 06e3e1f055593bd2e2906f43040a703bc471cde4.
This commit can only pass far-end USB eye diagram but will fail on near-end.
Confirmed with Intel we should revert it.
Change-Id: Ie987061e27996b0acc8345bf9aadb42d2c940808
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25629
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This makes the Kconfig file more informative to read.
Change-Id: Icdf4184c8db9cfed4863d9e9f3b714d67f44a4bd
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
dimm_info.serial had a strange contract. The SPD spec defines a 4 byte
serial number. dimm_info.serial required a 4 character ascii string with
a null terminator.
This change makes the serial field so it matches the SPD spec.
smbios.c will then translate the byte array into hex and set it on the
smbios table.
There were only two callers that set the serial number:
* haswell/raminit.c: already does a memcpy(serial, spd->serial, 4), so
it already matches the new contract.
* amd_late_init.c: Previously copied the last 4 characters. Requires
decoding the serial number into a byte array.
google/cyan/spd/spd.c: This could be updated to pass the serial number,
but it uses a hard coded spd.bin.
Testing this on grunt, dmidecode now shows the full serial number:
Serial Number: 00000000
BUG=b:65403853
TEST=tested on grunt
Change-Id: Ifc58ad9ea4cdd2abe06a170a39b1f32680e7b299
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/25343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch enables EC SMI when ESPI is enabled.
BUG=b:77857802
TEST= SMI is working in depthcharge.
Change-Id: I52726194b8346488e5ad781e78e33c5d286d132f
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25569
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The converter was setting SMBIOS values when dimm_info expects SPD
values.
dmidecode now shows the following:
Memory Device
Array Handle: 0x0000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: SODIMM
Set: None
Locator: Channel-0-DIMM-0
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous
Speed: 933 MT/s
Manufacturer: Hynix/Hyundai
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: HMAA51S6AMR6N-UH
Rank: 1
Configured Clock Speed: 933 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Example debug output:
AGESA TYPE 17 DMI INFO:
Handle: 1
TotalWidth: 64
DataWidth: 64
MemorySize: 8192
DeviceSet: 0
Speed: 1200
ManufacturerIdCode: 44416
Attributes: 1
ExtSize: 0
ConfigSpeed: 933
MemoryType: 0x1a
FormFactor: 0xd
DeviceLocator: DIMM 0
BankLocator: CHANNEL A
SerialNumber(8): ' 00000000'
PartNumber(20): 'HMAA51S6AMR6N-UH '
CBMEM_ID_MEMINFO:
dimm_size: 8192
ddr_type: 0x1a
ddr_frequency: 933
rank_per_dimm: 1
channel_num: 0
dimm_num: 0
bank_locator: 0
mod_id: 44416
mod_type: 0x4
bus_width: 3
serial: 0x00000000
module_part_number(18): 'HMAA51S6AMR6N-UH '
The serial number we get from AGESA (at least on my
board) is always 00000000. I'm assuming this is because the SPD info is
compiled in.
`mosys memory spd print all` is still failing though. I will look into
that next.
BUG=b:65403853
BRANCH=dimm-info
TEST=Test output above
Change-Id: I076bc3f965f81a9374c8976da48c7fdce014dc0c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/25304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new method to clone an existing memrange with all of its entries.
Required for new bootmem type LB_MEM_RAM_DONT_OVERLAP.
Change-Id: I64b27bf2611ca310385ef680f030a3e4aa0c2680
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25582
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the recovery cache to speed up recovery flows. Also
enable clearing of the normal mrc cache on recovery forced retrains.
BUG=b:77871444
TEST=went into recovery twice. 2nd time it boots faster.
Change-Id: Idfce42ac835637fa521545fadfedecd65df91d4c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change selects DRIVERS_SPI_ACPI which is required to add SSDT
node for SPI TPM.
BUG=b:75306520
BRANCH=None
TEST=None
Change-Id: I0728062dae017522ba91a4b5cb16acf9f6bf4f28
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25611
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AMD AGESA returns DIMM info in SMBIOS format. dimm_info expects the data
in SPD format. These methods will be used to update amd_late_init.c so
it sets the correct values.
BUG=b:65403853
TEST=Built and booted grunt. Methods are not called in this commit. So
they were tested with the later commit by verifying the output of
dmidecode.
Change-Id: Id9fa98e9aad83dfd0a86f45e18b3c312665dce9b
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/25412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts")
Change-Id: I5730259bc6819defc482d31644e1f476679257b2
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25588
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For cannonlake_rvp, want to support two sound configurations based on
relevant daughter board connected (either of these configurations:
SND_MAX98373_NHLT and SND_MAX98357_DA7219_NHLT).
By default SSDT included all codec entries.
This patch corrects and includes relevant codec entries in SSDT
BUG=None
BRANCH=master
TEST=Verify 'emerge-cnlrvp coreboot' compiles successfully.
Change-Id: I4f9487f3a81ef2d24315f75ec1d34bfab8560224
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/24918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
By storing the FSP-M DRAM configuration parameter in the hwinfo block,
one becomes more flexible in case of a change of the DRAM type.
The configuration data from hwinfo block is a one-to-one representation
of the FSPM_UPD data starting with parameter 'Package' (offset 0x4d) and
ending before parameter 'Ch0_Bit_swizzling' (offset 0x88).
Change-Id: I58c1df0954a436710ecb59487ece07a0832b0de6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Relocate setting the temp range MTRR, for the SPI flash device, to
after completion of mp_init. The mp_init functionality mirrors the
BSP's exact MTRR settings into the AP cores. The ranges need to be
the correct calculated values and not some temporary setting.
This solves an MTRR sync issue on APUs with more than two cores,
i.e. more than a single compute-unit. MTRRs within a CU are shared
so the AP always stays in sync.
BUG=b:77457944
TEST=run on Kahlee
Change-Id: Idc4cccdf721e252bc87d6cba62a3406a9f19b940
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/25575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The list of supported architectures in the usage output of cbfstool is
currently hardcoded and outdated.
Use the arch_names array in common.c to provide and up-to-date list.
Change-Id: I3e7ed67c3bfd928b304c314fcc8e1bea35561662
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Currently, "cbfstool -h | less" doesn't show any file types under
"TYPEs:". That's because the file types are printed with
print_supported_filetypes, which uses LOG, which prints to stderr. Use
printf print_supported_filetypes, and thus print to stdout, to make the
usage output more normal.
Change-Id: I800c9205c59383b63a640bc0798a1bd9117b0f99
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To avoid rounding errors with the current data types, the formula in
this function must be converted.
Change-Id: I75d05165fd9e5a0992330df00f8665a05d2daeb3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Grunt supports a keyboard backlight, so enable the ASL code.
BUG=b:77455525
Test=Boot Grunt, verify that the string 'KBLT' is in the DSDT.
Change-Id: Idf0f23581bcba0b035c126c68fb167274d7c698a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/25470
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 5fbe788bae15f0d24d56011e8eb8b48c107b7b05.
This commit was submitted without its parent being submitted,
resulting in coreboot not building.
Change-Id: I87497093ccf6909b88e3a40d5f472afeb7f2c552
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/25616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch adds a few southbridge calls needed for parallel MP init.
Moves the smm_relocate() function to smm/gen1/smi.h, since that is
where this function is defined now.
Tested on Thinkpad X220, shaves of ~30ms on a 2 core, 4 threads CPU.
Change-Id: Iacd7bfedfccbc09057e1b7ca3bd03d44a888871d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23432
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is required for clock parameter settings to take effect.
BUG=b:75306520
BRANCH=None
TEST=On Octopus, used a scope to check that spi_clk fed to tpm is
1 MHz
Change-Id: Icdb617aa4aa944d46b3a56dab88d2008b01dea0d
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/25573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The term MTRR has been misspelled in a few places.
Change-Id: I3e3c11f80de331fa45ae89779f2b8a74a0097c74
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The missing space resulted in the following broken output:
> ERROR: Not enough MTRRs available! MTRR indexis 10 with 10 MTTRs in
total.
Put the string on one line to make it obvious where the spaces should be
and to help users of grep.
Change-Id: Ib9e8109d88c1bf38e7dda3dbf1c8d47fb0d23265
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25567
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RISC-V does not have the kind of I/O space that x86 has. Other
architectures tend to leave out these definitions as well.
Change-Id: I7328dae1f1fa4ef8772750244a0b11a3fa5aa88f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This allows VGA output in SeaBIOS to be enabled using the
SEABIOS_VGA_COREBOOT Kconfig option. Currently, it’s impossible to select
the VGA text frame buffer in the Kconfig menu.
I'm not sure why this wasn't enabled in the first place, but
SeaVGABIOS seems to work just fine with this patch.
Tested on KCMA-D8.
Change-Id: Ic924a12fbe89940b5f26d211eb8de6cab0be767a
Signed-off-by: Daniel Gröber <dxld@darkboxed.org>
Reviewed-on: https://review.coreboot.org/25554
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d18dfea0b0a33995de805219bda3a73892e5fde
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I639be58df358129c1f420cf8d1540edd408859a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/25572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Intel internal graphics preallocated memory size should be selected from
below lists as per Intel FSP UPD header:
0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB,
0xF0:4MB, 0xF1:8MB, 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB,
0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, 0xFB:48MB,
0xFC:52MB, 0xFD:56MB, 0xFE:60MB
This patch ensures that coreboot can report the same preallocated
memory range for intel grapics during memory layout calculation.
Note: Today all existing SoCs(except Cannonlake) are supported under intel
common code block design may not need to use any other values than 0x0-0x05
for GFX DSM range. DSM memory ranges between 0xF0-0xF6 are majorly for
early SoC samples and validation requirement. This code block to justify
all differnet possible ranges that FSP may support for a platform.
TEST=Set IgdDvmt50PreAlloc UPD with different ranges between 4MB-60MB
and coreboot could able to calculate GFX DSM range accordingly.
Change-Id: I99735e9a2ee57626bd9d7258e700f7f39ef02e58
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move all Intel WIFI PCI ids into device/pci_ids.h file.
TEST=HrP module is getting detected during PCI enumeration.
Change-Id: Ia2d15f3f4a68887521ddbb1b99daf9d98cfa5c8b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is for consistency with other platforms.
BUG=b:77494826
BRANCH=None
TEST=Sucessfully rebooted, saw updated name in SMBIOS
Change-Id: I83d9075931d51b3aef8076e4567a85a808ee5047
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/25591
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On APL and GLK the i2c blocks use 133MHz input clock, but the
SPI blocks use a 100MHz input clock. Fix this so that the proper
target frequencies can be hit on the SPI controllers.
BUG=b:75306520
Change-Id: Iec36579894fa4633ac8d1035e6e7afec01af755f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Correct Cannonlake I2C clock frequency to 133Mhz that will match the
silicon, Cannonlake have I2C clock force to 133Mhz.
BUG=b:75306520
Change-Id: Iaab8851bb00cf27876d4068167a283ed79a28b2d
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/25610
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apparently Intel had decided to use different clock speeds for
some of its IP blocks in some of its designs. The i2c designware driver
has already been moved into common code allowing for its own Kconfig
value. That currently leaves SPI (UART isn't using the clock currently).
Therefore, remove SOC_INTEL_COMMON_LPSS_CLOCK_MHZ and add
SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ to allow for the different clock
speeds present in the system for the various IP blocks.
BUG=b:75306520
Change-Id: I6cb8c2de0ff446b6006bc37645fca64f2b70bf17
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25608
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As part of moving AGESA calls from bootblock to romstage, create
infrastructure to pass a pointer to the AP cores, so they can jump directly
to romstage.
BUG=b:74236170
TEST=Build and boot grunt, actual test will be performed at a later patch.
Change-Id: If716d1c1970746f2ad90ef71ae9062c99f219897
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As part of moving AGESA calls from bootblock to romstage, callback function
AGESA_HALT_THIS_AP must be available at romstage.
BUG=b:74236170
TEST=Build and boot grunt, actual test will be performed at a later patch.
Change-Id: I0992b2de5856881c19191ec4f637168727686524
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25527
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As part of moving AGESA calls from bootblock to romstage, OemCustomize.c
of all boards using stoneyridge must be available at romstage.
BUG=b:74236170
TEST=Build grunt and kahlee, actual test will be performed at a later patch.
Change-Id: Ide9efdbff6a07c670034391c0d62e8b74fa5c02b
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25528
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25dca2e231343cfdad61a638f0302726a6aa3f8b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This will help static site generators that can turn Markdown into HTML
but can't easily turn plain text into HTML.
Change-Id: Iabdbbecd0badddbca2221c6164b254ca163555ad
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This will help static site generators that can turn Markdown into HTML
but can't easily turn plain text into HTML.
Change-Id: Id186db140503f3c2759d579b18476fff021988c8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
coreboot doesn't support any Xivo boards, and their tree has been only
available as a tarball for a while. Let's remove this link from the
Supported Motherboards page's preamble.
It's still listed on https://www.coreboot.org/Supported_Motherboards/old.
Change-Id: I50e7bec02e803b62563f21384d857f1b37904dd1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
corebootv4 vs. just coreboot has lost its significance. Version 4.0 has
been released in February 2010.
Change-Id: Ic2a35739e53fea411efc8691f1ba7db85ba0c764
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fixes: ba49c09b2f ("mb/google/poppy: Add variant for Atlas")
Change-Id: I9c5c10abf8129ff61b97312a70ed4749606a3090
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25556
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib6f73dc0b0d11f6b66b7dbdd33cd6785359191ab
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since there are two cameras on Nami and only one camera on Vayne.
We need to disable rear camera on all Vayne sku.
BUG=b:75073617
BRANCH=master
TEST=Verify if only front camera shown on Vayne
Change-Id: I6e7c1e8791462f00ad8336372954ee0a9465d9b8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/25563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
TSEG is not accessible in ring 0 after it is locked in ramstage, in
contrast with cbmem which remains accessible. Assuming SMM does not
touch the cache this is a good region to cache stages.
The code is mostly copied from src/cpu/intel/haswell.
TESTED on Thinkpad X220: on a cold boot the stage cache gets created
and on S3 the cached ramstage gets properly used.
Change-Id: Ifd8f939416b1712f6e5c74f544a5828745f8c2f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Now that calc_var_mtrrs_with_hole() always chooses the optimal
allocation, there is no need for calc_var_mtrrs_without_hole()
any more. Drop it and all the logic to decide which one to call.
Tests performed compared to "upstream" (before "cpu/x86/mtrr:
Optimize hole carving strategy") on a Lenovo/X200s with 48MiB
GFX stolen memory.
2GiB total RAM: 3 MTRRs saved
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x000000007ac00000 size 0x7ab40000 type 6
0x000000007ac00000 - 0x00000000d0000000 size 0x55400000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
upstream:
MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/8 > 6.
MTRR: default type WB/UC MTRR counts: 4/7.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007ac00000 mask 0x0000000fffc00000 type 0
MTRR: 1 base 0x000000007b000000 mask 0x0000000fff000000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000000ffc000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0
patched:
MTRR: default type WB/UC MTRR counts: 7/5.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
MTRR: 1 base 0x000000007ac00000 mask 0x0000000fffc00000 type 0
MTRR: 2 base 0x000000007b000000 mask 0x0000000fff000000 type 0
MTRR: 3 base 0x000000007c000000 mask 0x0000000ffc000000 type 0
MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
4GiB total RAM: no MTRRs saved but slightly more accurate alignment
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x000000007cc00000 size 0x7cb40000 type 6
0x000000007cc00000 - 0x00000000d0000000 size 0x53400000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000017c000000 size 0x7c000000 type 6
upstream:
MTRR: default type WB/UC MTRR counts: 7/6.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
MTRR: 1 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0
MTRR: 2 base 0x000000007d000000 mask 0x0000000fff000000 type 0
MTRR: 3 base 0x000000007e000000 mask 0x0000000ffe000000 type 0
MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 5 base 0x0000000100000000 mask 0x0000000f00000000 type 6
patched:
MTRR: default type WB/UC MTRR counts: 7/6.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
MTRR: 1 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0
MTRR: 2 base 0x000000007d000000 mask 0x0000000fff000000 type 0
MTRR: 3 base 0x000000007e000000 mask 0x0000000ffe000000 type 0
MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 5 base 0x0000000100000000 mask 0x0000000f80000000 type 6
8GiB total RAM: possible savings but WB still beats UC
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x000000007cc00000 size 0x7cb40000 type 6
0x000000007cc00000 - 0x00000000d0000000 size 0x53400000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000027c000000 size 0x17c000000 type 6
upstream:
MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/11 > 6.
MTRR: default type WB/UC MTRR counts: 4/10.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0
MTRR: 1 base 0x000000007d000000 mask 0x0000000fff000000 type 0
MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0
patched:
MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/7 > 6.
MTRR: default type WB/UC MTRR counts: 4/6.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0
MTRR: 1 base 0x000000007d000000 mask 0x0000000fff000000 type 0
MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0
Change-Id: Iedf7dfad61d6baac91973062e2688ad866f05afd
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For WB ranges with unaligned end, we try to align the range up and
carve a hole out of it which might reduce MTRR usage. Instead of
trying an arbitrary alignment, we try all and choose an optimal
one.
Also, restructure the cases when we try to find a hole. Which leads
us to the following three:
1. WB range is last in address space:
Aligning up, up to the next power of 2, may gain us something.
2. The next range is of type UC:
We may align up, up to the _end_ of the next range. If there
is a gap between the current and the next range, it would
have been covered by the default type UC anyway.
3. The next range is not of type UC:
We may align up, up to the _base_ of the next range. This is
the end of the gap, if there is one.
Change-Id: Iefb064ce8c4f293490a19dd46054b966c63bde44
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch sets the wake for EC to proper gpios.
BUG=77605178
TEST=Test that lidopen wakes up the system from S3.
Change-Id: Icbf30007403191005396027e74b9b6fb7319e006
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/25539
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:77605178
TEST=Tested EC wake sources
Change-Id: Id879b3e91d4c0794662cf3d8204bd077117db23c
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
MONITOR/MWAIT had an irremediable hardware bug for Apollolake.
This has been fixed for GLK. Therefore, make MONITOR/MWAIT based
C-states the default for GLK and disable IO-Redirection based
C-states used for Apollolake.
Tested on GLK w/kernel 4.14.27 using turbostat to observe C-state
residencies with and without load.
Tested for S0ix entry and exit using:
"echo freeze > /sys/power/state" and "suspend_stress_test -c 500".
BUG=b:77639897
Change-Id: If648c25a9b26c04b278dce4af241d439790288ca
Signed-off-by: Cole Nelson <colex.nelson@intel.com>
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/19718
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add function to modify NXE bit & PAT.
BUG=None
BRANCH=None
TEST=Make sure build for Glkrvp is successful.
Change-Id: I265d6d5ca538496934a375eb8d99d52879522051
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/25480
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
