summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-06arch/x86/Kconfig: Add deprecation warnings for LATE_CBMEM_INITJonathan Neuschäfer
The deprecation of late (post-romstage) CBMEM initialization was announced in this blog post: https://blogs.coreboot.org/blog/2017/05/08/announcing-coreboot-4-6/ There are two warnings: * In LATE_CBMEM_INIT's help text, I've added a multi-line warning, that aims to explain the problem. * In src/mainboard/Kconfig (just below the mainboard selection), there's a warning which points the user at LATE_CBMEM_INIT, if such a board is selected. Also update the function that needs to be implemented, as pointed out by Keith Hui and Kyösti Mälkki. Change-Id: I2d21a6ab2fc2811d44fc4febb05841bb2f8d1857 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-06nb/intel/i945/raminit.c: Refactor tRD selectionArthur Heymans
Inspired by gm45 code, which sets this value the same way. Some values for tRD on 800 and 1067MHz FSB were set wrong because the CAS/Freq selection was wrong. CAS was often selected to low and when fixing CAS this results in tRD being too high, due to an incorrect lookup table which caused instability. PASSED memtest86+ during 10h+ on 1067MHZ fsb with 667MHz ddr2, CAS 5 on GA-945GCM-S2L. Change-Id: I8002daf25b7603131b78b01075f43fd23747dd94 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-06device/dram/ddr2: Add a function to normalize tCLKArthur Heymans
Also make most significant bit function accessible outside the scope of this file. Change-Id: I3ab39d38a243edddfde8f70ebd23f79ff774e90e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-06Makefile: Include Makefile from site-localNaresh G Solanki
Include Makefile from site-local even in absence of DOTCONFIG. This will allow execution of Makefile option from site-local in absence of DOTCONFIG as well. Change-Id: I62d1562687ffe18546add80fdde1196700a65236 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/21303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-06Makefile: Keep list of exported variablesNico Huber
This can be useful to unexport them later. Change-Id: I2ce9eff32d817ec190441550116376843abd1c11 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06mb/winnet/g170: Drop AMD car.h file from Via mainboardJonathan Neuschäfer
08f7d1ae0d ("mainboard/via*: Drop AMD car.h file") did the same for all Via mainboards that were in tree at that time, but the winnet/g170 was merged a bit later. Change-Id: Iedb33f4c2fce6fc2cf2669fee4ffb25bf793c92b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06intelmetool: Add support for Sunrise Point-HShawn Chang
Tested on P10S-M WS. Change-Id: I62f78fe5ca03bf70497939a12f0036bf247b2aa7 Signed-off-by: Shawn Chang <citypw@gmail.com> Reviewed-on: https://review.coreboot.org/21301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-09-06abuild: Allow building with any toolchainDamien Zammit
Adds -A --any-toolchain option to abuild This is handy for those who want to test compiling all board configs with abuild using a non-coreboot toolchain Change-Id: Idd599b0d2c324ad88ba3c83cdf3b180eb6d1fc80 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06vc/intel/fsp/fsp1_1/braswell: Update FspUpdVpd.h to v 1.1.7.0Martin Roth
Cherry-pick from Chromium 414024e. Update the FSP 1.1 header to version 1.1.7.0, required for susequent Chromium cherry-picks and to-be-merged Braswell CrOS devices. As this header update doesn't shift offsets, only adds new fields in previously unused/reserved space, it should not negatively impact existing boards built against the older header version. Original-Change-Id: Ic378b3c10769c10d8e47c8c76b8e397ddb9ce020 Original-Signed-off-by: Martin Roth <martinroth@google.com> Original-Reviewed-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Stefan Reinauer <reinauer@google.com> Original-Tested-by: Martin Roth <martinroth@chromium.org> Change-Id: Id33d41dee998cfa033264a98dfee40e2d8feead8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06sb/intel/i82801jx: Use __packedJonathan Neuschäfer
__packed has been introduced in commit 6a00113de8 ("Rename __attribute__((packed)) --> __packed"). Use it. Change-Id: Ifd33129ae4fbe14c26ceeaaa88832ef994a32dfb Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-06soc/amd/stoneyridge: Use __packedJonathan Neuschäfer
__packed has been introduced in commit 6a00113de8 ("Rename __attribute__((packed)) --> __packed"). Use it. Change-Id: Ie654567ebff884b911de10bd9fef605436e72af8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-06ec/lenovo/h8: Add BDC detection supportPatrick Rudolph
* Add support for detecting BDC. * Allows to turn off power to BDC if no card is installed. * Should fix https://ticket.coreboot.org/issues/99 . Add the following devicetree values: * has_bdc_detection Set to one to indicate that the following register are sane. * bdc_gpio_num SB GPIO num to read. * bdc_gpio_lvl SB GPIO level for card to be present (usually zero). Don't enable BDC power if no card is detected. As there are no devicetree values yet, the new code doesn't have any effect. Change-Id: I506de2eca4b820e6d82de6b2c48a5440462e1db5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-06ACPI S3: Remove conflicting local acpi_get_sleep_type()Kyösti Mälkki
We now require EARLY_CBMEM_INIT and romstage_handoff to support HAVE_ACPI_RESUME. Thus acpi_handoff_wakeup() would never call an externally defined acpi_get_sleep_type(). Name _sleep_type() was also inapproriate here, as it referred to hardware-dependent SLP_TYP field of PM1CNT but still returned ACPI_Sx value instead. Change-Id: I8dc130f1e86dd7e96922d546f0ae9713188336cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-09-06soc/intel/{cannonlake,skylake}: Fix null pointer dereference in klocworkSubrata Banik
This patch fixes klocwork bug due to recent memmap.c implementation where “Pointer 'dev' returned from call to function 'dev_find_slot' at line 144 may be NULL.” Change-Id: I4c74ca410d1a0ba48634ec9928a0d9d1cc20e27a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05intel/skylake: nhlt: Add capture configuration format for IV feedback from ↵Harsha Priya
max98927 This changelist adds the capture format to be set for max98927. The nhlt blob is the same but the format params for capture are different from the render. BUG=b:36724448 TEST=IV feedback data is of good quality Change-Id: I135cf4479e89cd2046ff46027f94c0f71aed650e Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05nvidia/tegra*: Use xcompile for compiler prefix unless specifiedPatrick Georgi
GCC_PREFIX is uncommon in the coreboot tree. If not provided, take data from .xcompile to fill in the blanks. Change-Id: I711a73be9d35d896198664f0ae213218653f275e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/21391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-05Move ADDR32() hack to arch/x86Patrick Georgi
It's arch specific, so no need to pollute non-x86 with it. Change-Id: I99ec76d591789db186e8a33774565e5a04fc4e47 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/21392 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-05mainboard/intel/harcuvar: Add support for Intel Harcuvar CRBMariusz Szafranski
The Harcuvar CRB is a reference platform of Intel Atom C3000 SoC ("Denverton" and "Denverton-NS") for the communications segment/market. The MohonPeak coreboot was used as the starting template with additions/modifications from other Intel Apollo Lake/Skylake coreboot. Tested with TianoCore payload (UDK2015) and Poky (Yocto Project Reference Distro) 2.0 with kernel 4.1.8 booted from SATA drive and external USB pendrive. Change-Id: I088833e36e2d22d1fe1610b8dca1454092da511a Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2017-09-05soc/intel/denverton_ns: Add support for Intel Atom C3000 SoCMariusz Szafranski
This change adds support for Intel Atom C3000 SoC ("Denverton" and "Denverton-NS"). Code is partially based on Apollo Lake/Skylake code. Change-Id: I53d69aede3b92f1fe06b74a96cc40187fb9825f1 Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2017-09-05soc/intel/cannonlake: Set IGD stolen memory size to 64MBSubrata Banik
This patch overrides default FSP IGD stolen memory size UPD value. TEST=Ensures FSP-M UPD “IgdDvmt50PreAlloc” value is 0x2 (64MB) Change-Id: I63d992e139810ad203137b34c98d1a463f88b92d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-05nb/intel/common: Write MRC cache at exit of BS_DEV_INITNico Huber
We set the SPI lockdown in BS_POST_DEVICE (dev_finalize()) on many plat- forms now. The SPI controller is initialized at start of BS_DEV_INIT (dev_initialize()). The SPI lockdown usually shouldn't be a problem but the SPI driver imple- mentation lacks full support for the locked interface. Also, some options exist to lock all flash regions read-only until the next reboot. Change-Id: Ifda826ae2bb28adcce8dda8e2bb16dc38fe0fe9e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Bill XIE <persmule@gmail.com>
2017-09-05Documentation: Update Lesson2.mdEvelyn Huang
Update Lesson2.md to include information about updating a commit after it has been pushed to the remote repository. Change-Id: Iebf86113b13d859d9c9e3db51e22ea44cb1144f6 Signed-off-by: Evelyn Huang <evhuang@google.com> Reviewed-on: https://review.coreboot.org/20948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-05soc/intel/common/block/gpio: Fix PAD_DW1_MASKHannah Williams
for case CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL=y https://ticket.coreboot.org/issues/128 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I2b0b9c07ebc99f4b4d7e8c5a72483bedd33e2e07 Reviewed-on: https://review.coreboot.org/21282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-04Kconfig: Move and rename ADD_VBT_DATA_FILEPatrick Rudolph
Move ADD_VBT_DATA_FILE to "Devices" menu and rename it to INTEL_GMA_ADD_VBT_DATA_FILE. Depend on Intel platforms to avoid confusing users of non-Intel platforms. The Intel GMA driver will use the vbt.bin, if present, to fill the ACPI OpRegion. Change-Id: I688bac339c32e9c856642a0f4bd5929beef06409 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-04util/board_status: do a spell checkIdwer Vollering
Change-Id: Ie39be471851586076343b8e9454a9140d4664b8d Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/21322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-02libpayload/storage: Add Sunrise Point AHCI PCI idNico Huber
Change-Id: I9645d76d05014722e4ae0c398d82f7f8e34d6f1c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-02mainboard/google/fizz: Enable support for DPTFTsai, Gaggery
This patch adds the DPTF settings specfic to the mainboard and enables the CPU and other thermal sensors as participant device for fizz. It also enables the DPTF flag in the device tree for fizz. BUG=b:64915426 BRANCH=None TEST=emerge-fizz coreboot and run DPTF observation tool to make sure DPTF is up and running. Change-Id: Ic7d125a763f539158aa425fbba1d8a000a3465ca Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-02buildgcc: Fix up cross GCC buildingNico Huber
Add a missing line-break escape and, rather cosmetic, guard execution of $CXX which we allow but don't force to be set. Change-Id: Icf6d3b7de4b7999b8214489f28997964c490d1e9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21307 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-02mainboard/google/soraka: Remove wacom digitizerWisley Chen
We have no wacom digitizer on I2C#3, so remove it. TEST=build and boot on soraka. Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21309 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-02clang: Allow ANY_TOOLCHAIN for non-coreboot clangDamien Zammit
Previously, only when selecting GCC could any toolchain be selected, this allows compiling with distro clang/llvm. Change-Id: I2d9d02f360d54ed92d6b6f55e6fcd530aae79adb Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-02Fix build with CLANG, avoid GCC only CFLAGSArthur Heymans
Commit 7c8d331fbb "Fine-tune compiler flags" added CFLAGS that are not existing on CLANG hence breaking building coreboot with clang. Fixes: https://ticket.coreboot.org/issues/134 Change-Id: Ie0250e285b0c5a9f8ee2eb99401aeca875d2789a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-02clang: Enable integrated assembler on clang buildsDamien Zammit
Change-Id: I883bf7eb2ab52ba3d7a284c96d4aade8bc1ee4ae Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21221 Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-02cpu/x86/smm: Fix explicit 'addr32' usage in clang buildsEdward O'Callaghan
The addr32 prefix is required by binutils, because even when given an explicit address which is greater than 64KiB, it will throw a warning about truncation, and stupidly emit the opcode with a 16-bit addressing mode and the wrong address. However, in the case of LLVM, this doesn't happen, and is happy to just use 32-bit addressing whenever it may require it. This means that LLVM never really needs an explicit addr32 prefix to use 32-bit addressing in 16-bit mode. Change-Id: Ia160d3f7da6653ea24c8229dc26f265e5f15aabb Also-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-02soc/intel/cannonlake: Use common mca_configure() APIPratik Prajapati
Use mca_configure() API from cpulib to configure Intel Machine Check Architecture (MCA) Change-Id: Ib4943a7f7929775bd5e9945462e530ef68a398b8 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02soc/intel/skylake: Use common mca_configure() APIPratik Prajapati
Use mca_configure() API from cpulib to configure Intel Machine Check Architecture (MCA) Change-Id: Ia96cb82fff3def46dbecb09dee94de86f179abe6 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02intel/common/cpulib: Add API to configure MCAPratik Prajapati
Add mca_configure() API to configure Intel Machine Check Architecture (MCA). Change-Id: I5e88c7527ce350824e48892caa978b2b78f1de20 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02util/lint/checkpatch: Untaint variables from env & command lineMartin Roth
Jenkins is giving warnings due tainted variables from the environment and command line: Insecure $ENV{PATH} while running setgid at util/lint/checkpatch.pl line 907, <$conststructs> line 39. Insecure dependency in piped open while running setgid at util/lint/checkpatch.pl line 907, <$conststructs> line 39. This should fix those warnings. Change-Id: I6a09915d13547bf9a86c011d44cbcd39c46f3fec Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-02nb/intel/pineview: Enable dram remappingArthur Heymans
Without this remapping code enabled, the system fails to boot properly if the amount of ram inserted is larger than 4G minus the mmio space (hardcoded to 1G here). Change-Id: I02e7ceed0cd9db7eb7182481b6989f80cef31ee5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-01soc/intel/cannonlake: Define Max PCIE Root PortsPratik Prajapati
This patch defines Max PCIE Root Ports and fixes bellow Coverity scan defect, *** CID 1380036: Control flow issues (NO_EFFECT) /src/soc/intel/cannonlake/romstage/romstage.c: 80 in soc_memory_init_params() 79 >>> CID 1380036: Control flow issues (NO_EFFECT) >>> "i" is converted to an unsigned type because it's compared to an unsigned constant. 80 for (i = 0; i < ARRAY_SIZE(config->PcieRpEnable); i++) { 81 if (config->PcieRpEnable[i]) 82 mask |= (1 << i); Change-Id: Id45ff6e96043ed71117018a4e73d08920ae9667e Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01soc/intel/cannonlake: add *spi.c files to makeNick Vaccaro
Adds spi.c and gspi.c to verstage. Change-Id: I363d9aafa989c5a7a0b36ad9edf1c70a75604d28 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/21284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01soc/intel/cannonlake: add gpio files to makeNick Vaccaro
Adds gpio.c to romstage and ramstage. Adds select GENERIC_GPIO_LIB to CPU_SPECIFIC_OPTIONS. Change-Id: I4931f6c6f089cc54ea168cf4a80d268d983a61de Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/21283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01nb/intel/i440bx/debug.c: Bugfix and cleanupKeith Hui
Fix dump_pci_device() broken by commit 65b72ab5 (Drop print_ implementation from non-romcc boards) in 2015 (!) where only one in 16 bytes were being dumped. Also remove the #if made redundant by commit aef8542 (Compile debug.c only if CONFIG_DEBUG_RAM_SETUP) as this whole file is only compiled in that case. Also clean up headers that were included twice. Change-Id: I60e272b29417039feb15540e49d7300f86e5ed21 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-01intel/i440bx: Move LATE_CBMEM_INIT under mainboardKyösti Mälkki
Some of these will move to EARLY_CBMEM_INIT. Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2017-09-01buildgcc: Integrate nds32 update from Andes TechnologyStefan Reinauer
This patch has been provided by Mentor Chih-Chyang Chang on behalf of Andes Technology. It fixes using the coreboot toolchain to compile the Chrome EC code base on the ITE8320 embedded controller. The new patch incorporates a fix for the issue previously fixed by patches/gcc-6.3.0_nds32.patch, so that patch can be removed. patches/gcc-6.3.0_riscv.patch needs to be slightly adjusted to still apply cleanly (configure scripts only). Change-Id: I0033888360f13ba951b692b3242aab6697ca61b3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-01soc/intel/canonlake: Enable LPSS UART in 32bit PCI modeLijian Zhao
Cannonlake LPSS UART port can be working on both 32 bit and 8 bit mode. To maintian compatibilty with previous generation of SOC, select 32 bit mode as default. Change-Id: Iaef8bceabc1b12e054ab4a364f98b568a9efcd85 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01lippert/toucan-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I8fb89fb82c3a3608bb84b29319eb793605538996 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01lippert/frontrunner-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01soc/intel/cannonlake: Perform dram top calculation based on HW registersSubrata Banik
This patch ensures that entire system memory calculation is done based on host bridge registers. BRANCH=none BUG=b:63974384 TEST=Build and boot cannonlake RVP successfully with below configurations 1. Booting to OS with no UPD change 2. Enable ProbelessTrace UPD and boot to OS. 3. Enable PRMRR with size 1MB and boot to OS. 4. Enable PRMRR with size 32MB and boot to OS. 5. Enable PRMRR with size 2MB and unable to boot to OS due to unsupported PRMRR size. 6. Enable C6 DRAM with PRMRR size 0MB and boot to OS. Change-Id: I0a430a24f52cdf6e2517a49910b77ab08a199ca2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01soc/intel/apollolake: Use SMM library to get tseg region informationSubrata Banik
This patch uses smm common library function to get tseg base address and size. Hence removing definitions of smm_region() from soc directory. BRANCH=none BUG=b:63974384 TEST=Build and boot reef successfully. Change-Id: I091ca90cf576c0da35cf3fe010f8c22a18ef82d9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01soc/intel/skylake: Use SA library to get smm region informationSubrata Banik
This patch uses system agent common library to know tseg region start and size. Unable to remove smm_region() function from soc code as SMM common library is not yet available for skylake use. BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: If98b65805753db2c30d6fea29e401a17cef39799 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-31google/gru: Support Nefario rev0Philip Chen
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario. Also, remove DVS support for CENTERLOGIC. BUG=b:64702054, b:63537905 TEST=build coreboot Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/21176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-31lenovo/g505s: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia65f9ecb62767424744e399a43e4728666fd28b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Enable XHCI device in devicetreeKyösti Mälkki
Enabling XHCI is additionally controlled with Kconfig option HUDSON_XHCI_ENABLE. Even when it is enabled, it EHCI debug works on the USB port next to the DVD drive door. Change-Id: I83738da6015f58ecd0819c553d333a176365dc78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31AGESA: Remove separate f15rlKyösti Mälkki
Change-Id: I18c62ad034249c5ad14e5d5e708b4f0d4bcbf400 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-31lenovo/g505s: Switch from f15rl to f15tnKyösti Mälkki
Support code for Trinity and Richland is identical now. I have also come across a unit with Trinity model CPU, whose CPUID was not listed in f15rl while f15tn already had support for f15rl. Change-Id: Ia869429b75a9b308b4d4a84f16914ca629b1b1b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-31cpu/x86 asm: Just use the correct op suffixEdward O'Callaghan
LLVM AS doesn't support as much GNU junk extensions, data16/32 is almost never needed in truth if we just use the correct op suffix. So do that here, fixes clang/llvm builds with the integrated-as toggled on. Change-Id: I6095d03d0289b418a49a10f135de5eb0e117cae0 Also-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-31AGESA f15 vendorcode: Remove unused sourcesKyösti Mälkki
Change-Id: Id1ed36e7e76d25cdc9e86254b108deaca0f8b423 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f15 vendorcode: Split to Makefile.inc filesKyösti Mälkki
Change-Id: I1b7d7c017a4dfd93c5befbc0d5858278eacc6c89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f16kb vendorcode: Split to Makefile.inc filesKyösti Mälkki
Change-Id: Id3d9a365469f7d73788cad4095ec3495fc9baf3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f15tn vendorcode: Split to Makefile.inc filesKyösti Mälkki
Change-Id: I2a6e53e5555a1b1e19c45a196b21f8505e275a76 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f14 vendorcode: Remove unused sourcesKyösti Mälkki
Change-Id: Ie4a735b156ded934fac0c9248fbb9042bf9be781 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f14 vendorcode: Split to Makefile.inc filesKyösti Mälkki
Change-Id: I6dbcd23b0ea03b1b965d43346ae1cf7cf1971eb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f12 vendorcode: Remove unused sourcesKyösti Mälkki
Change-Id: Ia22c96ee19babb3fc64d57966ea923eb5ec4b48f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-31AGESA f12 vendorcode: Split to Makefile.inc filesKyösti Mälkki
Change-Id: I8438dc468e59174bd6f88c0c02b2fbf60587dbfd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-30soc/intel/{cannonlake,skylake}: Add active default value for UART_FOR_CONSOLESubrata Banik
This patch to avoid build bot hang issue due to no active default value for UART_FOR_CONSOLE kconfig option. Change-Id: I70ca5dc6c4bde6a119ad59d8c58955c96c042198 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21287 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30acpigen: Add stop gpio control to power resourceFurquan Shaikh
There is at least one I2C device (being used by Soraka) that has 3 controls -- enable, reset and stop. If the stop gpio is not put into the right state when turning off the device in suspend mode, then it causes leakage. Thus, we need control in power resource to be able to stop the device when entering suspend state. BUG=b:64987428 TEST=Verified on soraka that touchscreen stop is correctly configured on suspend. Change-Id: Iae5ec7eb3972c5c7f80956d60d0d3c321bbefb0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21249 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30google/cyan: update SPD functionsMatt DeVillier
Update cyan's SPD-related functions to more closely mirror those of other Braswell boards, in order to simplify the upcoming baseboard/variant setup for Braswell ChromeOS boards. TEST: boot google/cyan, observe SPD correctly identified in cbmem log, RAM-related data correct in SMBIOS tables. Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30soc/intel/common: Add functions into common SMM librarySubrata Banik
This patch to add helper function to get SMM region start and size based on systemagent common library. BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: If10af4a3f6a5bd22db5a03bcd3033a01b1cce0b4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30soc/intel/common: Add functions into common system agent librarySubrata Banik
This patch to add helper function to get tseg memory base and size for HW based memory layout design. BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: I4c8b79f047e3dc6b2deb17fdb745f004004526b6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30soc/intel/cannonlake: Add PrmrrSize and C6DRAM configSubrata Banik
This patch ensures coreboot can set PRMRR size and C6DRAM enable FSP-M UPDs. Change-Id: I61ec3b6a16e20526516f681ddc3c70755724ed8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30mb/google/eve: rt5514: Add 16ms delay on dmic initDuncan Laurie
Add a 16ms delay to DMIC init by the kernel driver in order to prevent an audible 'pop' noise when starting to record. BUG=b:63413023 TEST=manual testing to ensure this device property is present in SSDT: Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "realtek,dmic-init-delay", 0x10 } } }) Change-Id: If9160ce6992153ba49719029de336595bbf4ae72 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30drivers/i2c/generic: Support additional device propertiesDuncan Laurie
Add support for providing additional free form device properties via devicetree in order to make this driver suitable for kernel drivers that need additional board-specific device properties. This currently allows adding up to 10 additional properties to a device. BUG=b:63413023 TEST=manual testing to ensure that newly added properties are in SSDT Change-Id: I2b8ceb208f4aba01053746547def6d07c8f8f3a2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30acpi_device: Provide a new function to add a list of propertiesDuncan Laurie
Provide a new function that will allow adding arbitrary properties to devicetree entries without needing a custom driver for the device. This will allow the 'generic i2c' driver to support kernel drivers that need additional device properties exposed and have those board specific properties set with values from devicetree. BUG=b:63413023 TEST=not used yet, compiles cleanly Change-Id: Id272256639a8525406635e168a3db5ab1ba4df6b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21269 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30sb/intel/*: add option to lockdown chipset on normal boot pathBill XIE
On platforms with a PCH, some registers within host bridge should be locked down on each normal boot path (done by either coreboot or payload) and S3 resume (always done by coreboot). A function to perform such locking is implemented in src/northbridge/ intel/*/finalize.c, and is designed as the handler of an #SMI triggered with outb(APM_CNT_FINALIZE, APM_CNT), but currently this #SMI is only triggered during s3 resume, and not on normal boot path. This problem has beed discussed in https://mail.coreboot.org/pipermail/coreboot/2017-August/084924.html . This time, an option "INTEL_CHIPSET_LOCKDOWN" within src/southbridge/ intel/common/Kconfig is added to control the actual locking, which depends on several compatibility flags, including "HAVE_INTEL_CHIPSET_LOCKDOWN". In this commit, "ibexpeak", "bd82x6x", "fsp_bd82x6x", and "lynxpoint" have the flag "HAVE_INTEL_CHIPSET_LOCKDOWN" selected. The change is only well tested on Sandy Bridge, my Lenovo x230. Change-Id: I43d4142291c8737b29738c41e8c484328b297b55 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-30ec/google: Use feature flag layout that matches the EC host commandPatrick Georgi
The EC side of the feature bits in ACPI EC space isn't stable yet, and we're now going for matching them up with the EC host command of the same purpose. Change-Id: I9c1f0e5390e840ea0c32315a3da8eea6f3e12f54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30AGESA: Drop Kconfig CPU_AMD_SOCKET_AM3R2Kyösti Mälkki
Never selected in our tree. Change-Id: I5065903ebf74d281ecccaf53e0cc9fa24317e1cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-30AGESA f15 vendorcode: Remove AM3r2 refcodeKyösti Mälkki
We never had a board in the tree that implements this. If you are interested in implementing such board, note that also f12 and f14 had copies of the same refcode. As part of the sourcetree cleanup it was not studied which was the most up-to-date one for AM3r2. Change-Id: Ic7dd065c0df08c22af6f3a2dcfc7ff47d6283a46 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-30AGESA f14 vendorcode: Keep only Ontario refcodeKyösti Mälkki
The only subtree we build is /ON. Change-Id: I8cb11211a2a5ab7d8ae6296b601ee09146a9c9f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-30AGESA f12 vendorcode: Keep only Liano refcodeKyösti Mälkki
The only subtree we build is /LN. Change-Id: I035932a4be41fa0451a3f3c7be33442afeeb5571 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-30AGESA vendorcode: Remove AMD_INIT_RECOVERYKyösti Mälkki
These files were never built in our tree. Furthermore, AMD_INIT_RECOVERY was already deprecated in AGESA spec rev 2.20 from Dec 2013. Change-Id: Ifcaf466ca0767bf7cfa41d6ac58f1956d71c7067 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-29sb/intel/bd82x6x: make hotplug map consistent to remapped portsBill XIE
"pcie_port_coalesce" will cause pcie being remapped under certain conditions, but flags within "pcie_hotplug_map" should be updated along with ports. Test on my lenovo t430s. Change-Id: I28c4eaf82fb52fe793dfa2f824f14686b80951ad Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21178 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-29soc/intel/cannonlake: Fix Coverity scan errorLijian Zhao
Add return in case of null pointer to avoid coverity scan error, fixed 1.Coverity ID 1379849: Null pointer dereferences (FORWARD_NULL) 2.Coverity ID 1379848: Null pointer dereferences (FORWARD_NULL) Change-Id: Ica19735307736c8a55c29af88db8b1372f8779e4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-08-29amd/stoneyridge: Change ACPI _PR.CPxx to _PR.PxxxMarc Jones
This is a bug introduced by this commit: stoneyridge: Fix CPU ASL \_PR table [commit I870f81] The following error is found in dmesg ACPI Error: [\_PR_.P000] Namespace lookup failure, AE_NOT_FOUND... ACPI Exception: AE_NOT_FOUND, During name lookup/catalog... ACPI Exception: AE_NOT_FOUND, (SSDT:AGESA ) while loading table... ACPI Error: 1 table load failures, 3 successful... ... acpi-cpufreq: overriding BIOS provided _PSD data And, "ls -la /sys/devices/system/cpu/cpufreq/" doesn't work The cause is that the Pstate SSDT table generated by AGESA expects CPU variables \_PR.Pxxx, not \_PR.CPxx as generated by coreboot. Use Kconfig to set the required string. BRANCH=none BUG=b:64885241 TEST= Check dmeg and ls -la /sys/devices/system/cpu/cpufreq/ Change-Id: I4929f9a1c39705c6df9d965c8d030f4d1f0b5e5f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29arch/x86: Add Kconfig option for ACPI \_PR CPU name stringMarc Jones
Add a Kconfig option to change the \PR.CPxx name string. This provides some flexibility when working with table not generated by coreboot. Change-Id: Ibc0c56783c6da80501e2177de96a414b592cb74f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-28mb/lenovo/t400/blc.c: Add B141EW05 V3 to whitelistKevin Keijzer
TESTED on Lenovo T400 Change-Id: I365aeb7e997def225c23d3287558bdc4eefa4298 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/21230 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-28google/Bruce: Add Raydium touch screen supportSheng-Liang Pan
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28soc/amd: Standardize guards on header filesMartin Roth
The guards in the header files were inconsistent. Some had no leading or trailing underscores, some had one, some had both leading and trailing. Change all to double leading & trailing underscores. Change all comments to have a space before them instead of tabs BUG=b:62235990 Test=Build Kahlee Change-Id: I4466df529ab201c922096a31d7438381778b582f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-28mainboard/winnet/g170: Add ACPI supportLubomir Rintel
What is present is APIC and legacy interrupt routing and the soft-off sleep state. Other sleep states are missing, so are the SuperIO devices. Boots Linux with and without "noapic" and a Windows XP (installed with factory BIOS, the installer reportedly requires legacy keyboard). Change-Id: Iee3ede8683d1ea51317228d4f782af27043cc945 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Initialize the IRQ routingLubomir Rintel
Initialize IRQ routing for legacy non-PNP OSes the same as the factory firmware would do. Change-Id: I0c7a7d584a2c47471456ab54ef6da815a2dc4e7c Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Add WinNET G170 boardLubomir Rintel
Change-Id: I0d7aba827fb87f69f542edd2f7ac7a66d949f865 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Copy from mainboard/bcom/winnetp680Lubomir Rintel
G170 is a board manufactured by WinNET, used in thin clients including HP Neoware CA19 and IGEL 2110. Copied from mainboard/bcom/winnetp680 which seems to be a similar board with an extra PCI slot. The p680 should probably be moved to winnet/ too, since the board is an OEM WinNET board, with BCom being just a machine that happens to it. Change-Id: I90b89ee634d90cfba2e56cca5b76cfd2bd7a8d0b Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28southbridge/via/vt8237r/acpi: Add IRQ routingLubomir Rintel
Includes objects for interrupt links, the LPC bridge and interrupt routing tables for the internal devices for both APIC and legacy modes. The default routing tables only includes peripherals internal to the VT8237R, if a mainboard has PCI slots (mine does not have), it needs to supply its own routing table. Change-Id: I3a0cdafc19159fe6c38e4dde08ad0bf2bd0dd6b8 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28soc/amd/stoneyridge: Increase preram console sizeMarshall Dawson
Increase the default setting to add more CAR space for the early console. This avoids truncation of the log. BUG=b:64980233 Change-Id: Ia11d1c6c186a7025510c240206743ebe8d741461 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21186 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-28mb/gigabyte/ga-b75m-d3*/acpi: Remove redundant codePatrick Rudolph
Remove obsolete code. The same settings are always done in southbridge. Change-Id: Ic893ddbace73ae8b122c4fb675febc7d1e0b5da9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 05:09:49 +0000