| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: If3b49c3056abe6e1c1a14578d6c62a866bc6834d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14127
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
|
|
In order for a caller to utilize an rmodule's parameters section
after calling rmodule_stage_load() export the rmodule's parameter
pointer in struct rmod_stage_load.
Change-Id: I9cd51652cf8cdb3fae773256989851638aa1a60f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14139
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13348
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set MMCONF_BASE_ADDRESS to 0xf8000000.
It was already done for some boards, but not all.
The sandybridge chipset code assumes 64 pci buses behind MMCONF.
Therefore, only 64MiB of physical address space is required.
Increasing the address allows to use additional 128MiB of MMIO
space and to use the Intel IGD and a PEG at the same time.
Previously it wasn't possible to use both at the same time,
as two 256MiB areas won't fit into MMIO space.
Test system:
* Gigabyte GA-B75M-D3H
* Intel Pentium CPU G2130
* Onboard GPU Intel IvyBridge Desktop
* PEG GPU AMD RV770
Change-Id: I3bf72439056c8089ada6899bb0605e5cd9d89cd6
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14096
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
In Chromium OS downstream this was done together with adding the support
for ATF, but unfortunately ATF upstream isn't ready yet. This commit
is a reminder to enable things once ATF caught up.
Change-Id: Id0d6908d906a1e54cdda4f232d572d996d9c556f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13968
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As the DA9212 and MT6311 external buck can be controlled by hardware
since rev-5 board, we don't need to pass any board specific parameter
to ARM TF.
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I43eebe25ab14d3dd84e8bb4286e2bb55c8c3c063
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c4dfe61c69042e464b384e2e0edbc55eda23a74
Original-Change-Id: I541357fee6afb1ff2d771bcb073f7c9a9db52f00
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332344
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove the code which is passing parameters to ARMTF and move external
buck initilizaton from ARMTF to coreboot.
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I4f4b30acbee9b42a202b326f2fe4517cb4b9d83c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37bec54b4d8a3bce38878e292e4821da3959026a
Original-Change-Id: Ib81709812a064f6daf13c9b4d6525f1858c81393
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332343
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add secondary PMIC for external buck control on Oak rev0/1/2/5
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: Ia000b0c7d61e8396856656247f9627e33b21b19b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 241508e7d781fac8ee085ee81962043dd654c52d
Original-Change-Id: I6c75e2462363a5523bf1ebb03af7a36740293624
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332342
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add secondary PMIC for external buck control on Oak rev3/4
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I24c18a1cf71fc57deacedcbeb6a100b131c28077
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7f7f8ceac795d8193194a6918a73c4b391009025
Original-Change-Id: I312d8281d2c09d8bc43f092edef3e405d51ee7d0
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332341
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
i2c_read_field() - read the value from the specific register field
i2c_write_field() - write the value to the specific register field
BRANCH=none
BUG=none
TEST=none
Change-Id: I2098715b4583c1936c93b3ff45ec330910964304
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0817fc76d07491b39c066f1393a6435f0831b50c
Original-Change-Id: I92c187a89d10cfcecf3dfd9291e0bc015459c393
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Under certain conditions (training abort) BlockRxDqsLock could
remain set in violation of the BKDG. Ensure BlockRxDqsLock is
reset to 0 after a lane training abort.
Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b
Reviewed-on: https://review.coreboot.org/14144
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Document how to test TempRamExit and verify the MTRR setup and loading.
TEST=None
Change-Id: I57a604fa139edac4b05453547d3caf185db491e0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14113
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add datasheet links for the components supporting GPIO. This includes
I2C I/O ports, I2C PWMs, bus buffers and multiplexers.
TEST=None
Change-Id: I0a1d222d6f9bdbd824b78edf2338cd797e83ebba
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14114
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add documentation on disabling the SPI flash which is mapped (shadowed)
into the x86 address space at 0x000e0000 - 0x000fffff.
TEST=None
Change-Id: I1d94d84c6cade97886a3274a7e7403f7b3275c5a
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14112
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing successful display of 0x000ffff0 - 0x000fffff does not match
the end of the SPI flash.
Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14110
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable the SPI controllers on the Quark SoC.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Load the SPI driver stack
* Testing is successful when the time is able to be displayed on a
set of seven-segment displays controlled by a Maxim MAX6950 SPI
display controller.
Change-Id: Ic9c4575730c5a9a27cf9a38a41e82d8462467f3f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14109
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add missing punctuation and align output.
No functionality is changed.
Old logging output:
Revision: 11
Type : b
Key : 2
Banks : 8
Capacity: 4 Gb
Supported voltages: 1.5V
SDRAM width : 8
Bus extension : 0 bits
Bus width : 64
Optional features : DLL-Off_mode RZQ/7 RZQ/6
Thermal features : ASR ext_temp_range
Thermal sensor : no
Standard SDRAM : yes
DIMM Rank1 Address bits mirrored!!!
DIMM Reference card B
DIMM Manufacturer ID cd04
DIMM Part number F3-1866C9-8GSR
XMP Profile 1
Max DIMMs per channel: 4
XMP Revision: 1.3
Requested voltage: 1500 mV
New logging output:
Revision : 11
Type : b
Key : 2
Banks : 8
Capacity : 4 Gb
Supported voltages : 1.5V
SDRAM width : 8
Bus extension : 0 bits
Bus width : 64
Optional features : DLL-Off_mode RZQ/7 RZQ/6
Thermal features : ASR ext_temp_range
Thermal sensor : no
Standard SDRAM : yes
Rank1 Address bits : mirrored
DIMM Reference card: B
Manufacturer ID : cd04
Part number : F3-1866C9-8GSR
XMP Profile : 1
Max DIMMs/channel : 4
XMP Revision : 1.3
Requested voltage : 1500 mV
Change-Id: Iee4d7a7c0e1070706fb60d7316fad49813963b51
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14083
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When CONFIG_X86_TOP4G_BOOTMEDIA_MAP was introduced verstage
was not updated. Correct this oversight.
Change-Id: I2775c08798906ba0ba55a361407d7d2b52313229
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14142
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I0eedda5f31c2809db7871b81ceb3045b782f9df1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14126
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Change-Id: I3efd4116da1ffda2dbc768d1a447141d8ec76f81
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14128
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Being able to fetch this list will allow the jenkins builder to securely
fetch the external payloads so we can start testing payload builds.
Change-Id: I777229216b2f11f0f427cd5f8cfa003da4171a77
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Instead of adding each payload to each common target, create a list
and loop through the list for all of the payloads
- '.phony' doesn't work - the target needs to be uppercase '.PHONY'
Change-Id: I4a7712c94d0f127c2fff8cb8fada4b8132a4ab3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These makefiles are not included by anything, so they shouldn't be
named Makefile.inc. Also, having them all be named 'Makefile' makes
some other consolidation work I'm doing much easier.
Change-Id: I1234539ba6a0a6f47d2eb0c21de3da3607c6b8de
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14130
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When using coreinfo on a serial console (at least
with gtkterm, picocom and minicom on Ubuntu 15.10)
you can't send F keys to the payload. Allow 1..9
for F1..F9
Change-Id: Ie3a11fa1de57c7345737a1ccaff177f407cd5e48
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14065
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The previous implementation assumed the CPU physical address size to
be 40 which is not true of all platforms. Use an existing function to
obtain the correct CPU physical address to report in the DMAR ACPI
table.
Change-Id: Ia79e9dadecc3f5f6a86ce3789b213222bef482b3
Signed-off-by: Jacob Laska <jlaska91@gmail.com>
Reviewed-on: https://review.coreboot.org/14102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of hard-coding var mtrr numbers in code, use this function to
identify the first available variable mtrr. If no such mtrr is
available, the function will return -1.
Change-Id: I2a1e02cdb45c0ab7e30609641977471eaa2431fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14115
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
BRANCH=none
BUG=chrome-os-partner:50820
TEST=check /proc/device-tree/firmware/coreboot/ram-code
Change-Id: I5ecf45cada7f8999ad607487d5d9281c4fb659ed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 79d2f0e183a2bde70817d673ae315709f46e3361
Original-Change-Id: I35e91b4e29f8e09acd74770715c96cf7320ac22c
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332564
Original-Reviewed-by: Milton Chiang <milton.chiang@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14104
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When system enters suspend, SPM will pull SRCVOLTEN low to turn off some
power rails. VSRMCA7 should follow this pin to turn on/off the power.
BRANCH=none
BUG=none
TEST=verified on Oak rev5
Change-Id: I9d81f855a74fe02a59246ce0c6a7f0e162b9fd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d92fb1029b810028138eb91b064b63a58b82602f
Original-Change-Id: I37ff0694cbd7b17d5a1ae172c463b4e6aae2b99c
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332345
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14103
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I84e68e8407149780769c3e6a1148c175e42d1025
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/14100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to make this work earlymtrr.c needed to be removed
from intel/truxton/romstage.c. It's not a ROMCC board so
there's no reason to be including .c files.
Change-Id: If4f5494a53773454b97b90fb856f7e52cadb3f44
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
I see no user of any of this code. Remove it.
Change-Id: I776cd3d9ac6578ecb0fe6d98f15611e4463afb7a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14098
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The Intel i3100 northbridge code is the only user of
cache_ramstage(). Therefore, place it next to the sole
consumer.
Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14097
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add all the default options with:
for i in configs/*
do
cp $i .config
make savedefconfig
mv defconfig $i
done
This also switches to minimal config files instead of the full
configuration files that were previously checked in.
Change-Id: If18a32eca4df9e1dfeb0e212b652d972cea8e4b8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14077
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
LIBCONFIG_PATH -> LIBPAYLOAD_PATH
LIBPAYLOAD_DIR -> LIBPAYLOAD_OBJ
Change-Id: Idd9947bac594f5b109b877aefac70b1a1d2336eb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14099
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes
IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get
their logic reset over pltrst and hence configuring PADRSTCFG to
PLTRST to prevent IRQ strom after S3 resume.
BRANCH=glados
BUG=chrome-os-partner:50536
TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed
after S3 resume.
Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68
Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac
Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329453
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331174
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This includes a fix that allows using cbootimage with paths containing
the "@" sign, which happens sometimes in jenkins configurations.
Change-Id: I83154afa35b6d24449e713e57031b1a93d7ac748
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14090
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Sort out some style issues that were identified by Paul.
Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14064
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When using PDcurses over a serial line, the background of
coreinfo is not properly cleared. Hence use tinycurses, which
was the only option when coreinfo was developed.
Change-Id: I15bb6eb552cf924de98d09ef63be33ecf336c526
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14067
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
The two external USB ports and the internal USB header have overcurrent
protection chips with the low-active overcurrent signal connected to the
chipset.
The power-on default for this register disables the software detection
of overcurrent conditions.
After setting the register Linux correctly shows the overcurrent
condition in the kernel log (tested by shorting the 5v and gnd lines on
J14 / the internal USB header):
[ 2015.229921] usb usb1-port3: over-current condition
[ 2015.449925] usb usb1-port4: over-current condition
Simlar for the external ports:
[ 256.237916] usb usb1-port1: over-current condition
[ 256.458084] usb usb1-port5: over-current condition
Note that each signal is shared between two ports:
usboc0#: External ports (port1/5)
usboc1#: Internal ports (port3/4)
Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/14084
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix for the T4xx and T5xx series.
It does not apply to X2xx/X6x series as those have only
one GPU, which is always connected to the display.
The T6x series needs special care not handled with this patch.
Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be
deactivated in case a dedicated GPU is found and active,
leaving the system without a working display.
Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14031
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
BRANCH=none
BUG=chrome-os-partner:49229
BUG=chrome-os-partner:50806
TEST=power on to kernel on Oak Rev3 with 4GB dram
Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14089
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If the system is using 4GB of memory, enable 4GB mode in
the memory controller.
Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14088
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This pin is not used anymore since Rev5.
BRANCH=none
BUG=chrome-os-partner:49375
TEST=make and boot on Rev4/5
Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419
Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331810
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14087
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a few additional macros that can be used throughout the coreboot
makefiles.
tolower: returns the value in all lowercase
toupper: returns the value in all uppercase
ws_to_under: returns the value with any whitespace changed to underscores
Change-Id: Icd0e6586481d8f229af0e899e0c94ef7c5c672c3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14093
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For CHROMEOS builds, depthcharge can be built automatically.
This dependency exists because depthcharge without vboot and subsequent
signing of the image doesn't work very well, and both are keyed to that
flag as well.
Change-Id: Id0195bd3b4e454f382782106d6512469106daac5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/10924
Tested-by: build bot (Jenkins)
|
|
This option is no longer needed, as FMAP support has been
fully integrated in coreboot
Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This will allow more payloads to use the standard linker script
instead of implementing their own.
Change-Id: Ie60120769829f427ceb722109d85859b61dbde31
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14074
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8c8669e73e335e12cb3785cf84b878c305dd5929
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14068
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
_LDFLAGS+="foo" did not work in my shell (bash on Ubuntu 15.10),
so change it to _LDFLAGS="$_LDFLAGS foo". I'm mildly surprised
that this ever worked.
Change-Id: I59c10f34992240c6df2ec7f24aebc6daafb76493
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14076
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8b74cbf6bdde32c90ad0510e14e899711269e57f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of 500, print 0x00000500 in the ram dump module.
Change-Id: Id250bd99f36dad4088ab88953fb371c400b4231b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14072
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MEMMAP_RAM_ONLY is not an architecture specific option,
hence move it out of the architecture specific menu.
Change-Id: Iaeef03ed8cbff930a580ad03b1e712087b48714e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is adding complexity to the code more than it saves
space, plus some of the tables could potentially be interesting
outside of the ChromeOS context.
Change-Id: I4bf24608f3e26d3b7871a5031ae8f03bc2c8c21f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Bring defconfig and defconfig-tinycurses in sync, so that
defconfig and defconfig-tinycurses only differ in the selection
of the curses implementation.
Change-Id: I739c5122b5aaaa2681055c845905721a0b2a11c1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14069
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The Kconfig lint tool is complaining because this symbol doesn't
exist. Create a temporary definition that can be removed when
the chipset is added.
Change-Id: I6a8abffcc91773aae16721ee1f48c4c64bd6b486
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14091
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change the comparison of build_timeless from -eq to =
This was generating an error if BUILD_TIMELESS wasn't set:
util/genbuild_h/genbuild_h.sh: line 27: [: : integer expression expected
This wasn't causing the script to fail, and won't even if 'set -e' is
added to the script because the error happens inside an 'if' clause,
which is specifically excluded from failue on 'set -e'.
Change-Id: I6a4e147ece23e83ee682d72db35be9e5d4088c78
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14080
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Commit c49014e (timestamp: add tick frequency to exported table)
refactors the code, but forgets to correctly scale the frequency to
megahertz, where the value is read from sysfs, so that printing time
stamp information shows milliseconds instead of microseconds, as can be
seen on the output `cbmem -t` for the ASRock E350M1 below.
```
0:1st timestamp 515
10:start of ramstage 515 (0)
30:device enumeration 515 (0)
40:device configuration 610 (94)
50:device enable 614 (4)
60:device initialization 624 (9)
70:device setup done 639 (14)
75:cbmem post 844 (205)
80:write tables 844 (0)
90:load payload 849 (4)
15:starting LZMA decompress (ignore for x86) 849 (0)
16:finished LZMA decompress (ignore for x86) 869 (20)
99:selfboot jump 869 (0)
Total Time: 350
```
So scale the return value correctly to megahertz, by dividing it with
1000.
```
0:1st timestamp 515,655
10:start of ramstage 515,655 (0)
30:device enumeration 515,663 (7)
40:device configuration 610,620 (94,957)
50:device enable 614,680 (4,059)
60:device initialization 624,618 (9,938)
70:device setup done 639,553 (14,934)
75:cbmem post 844,707 (205,154)
80:write tables 844,710 (2)
90:load payload 849,532 (4,821)
15:starting LZMA decompress (ignore for x86) 849,655 (123)
16:finished LZMA decompress (ignore for x86) 869,903 (20,247)
99:selfboot jump 869,922 (19)
Total Time: 354,261
```
Change-Id: Iea032c62487c7946b6194a90268755034c6350df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14086
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based
project and is based on Broadwell-DE Gold release. Change has been
verified on Intel Camelback Mountain CRB.
Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14030
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would
result in unusable devices, as the resources were set to 0 and the devices
were disabled.
lpss.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE
and applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode
set to disable and the devicetree set to default.
Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If the VBT was provided to the FSP GOP driver then graphics init
will be done as part of SiliconInit step and we can mark that
when it is completed.
This will result in the "oprom" flag being set properly in the
coreboot gpio table and the netboot firmware will have video.
[pg: avoided conflict with Quark that comes without
silicon_init_params.GraphicsConfigPtr]
BUG=chrome-os-partner:50864
BRANCH=glados
TEST=boot image.net.bin on chell and get working graphics
without being setuck in a reboot loop thinking graphics needs
to be started when it already has been.
Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331301
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240)
Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5
Original-Reviewed-on: https://chromium-review.googlesource.com/331355
Reviewed-on: https://review.coreboot.org/13986
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a
did not take into account the default UI setting introduced in
change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM
instability and occassional failure to boot.
Use the correct 1UI value for the modified function semantics.
Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14073
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since libpayload's LAR support was dropped in If6e36569cd, this module
doesn't compile anymore.
Change-Id: I98f25613a1728e94704d9e9ccb65fd6ba33968b9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14037
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Adds -D / --density option to change the chip density. This is only
implemented for IFD version 1 as I do not have an IFD version 2 to
test this. Density of both chips is changed by default, but a chip
can be selected using -C / --chip.
Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716
Signed-off-by: Jan Tatje <jan@jnt.io>
Reviewed-on: https://review.coreboot.org/14032
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change properly assigns resources to the LPE (Low Power Engine for
Audio) and enables ACPI mode.
lpe.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and
applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
That wipes out all previously stored settings and breaks running devices
in ACPI mode.
This more closely matches what is done in intel/baytrail.
Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We want to start testing builds with additional Kconfig options to try
to get more coverage. This will allow us to enable various options to
test without having to add each individual option to the abuild script.
Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i3100 boards in the chipset.
Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13786
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i810 boards in the chipset.
Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13784
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of manually including udelay_io.c in each romstage,
select UDELAY_IO for all i830 boards in the chipset.
Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
read_dqs_read_data_timing_registers() and
read_read_dqs_timing_control_registers() served essentially
the same function but had slightly different semantics,
causing confusion and needlessly complex Family15h code.
Consolidate both into read_dqs_read_data_timing_registers()
and adjust surrounding code to match new semantics.
Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13994
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add an option to specify a git revision from which to build SeaBIOS.
Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/13937
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins)
|
|
Skip logging a wake source when just resetting without coming from
S3 or S5 state. This will prevent the occasional spurious event
like PCI PME from showing up in the event log.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=run warm reboot teset on chell and ensure no wake source is logged
Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890
Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329846
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331173
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13991
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enable SDHCI runtime PM since the display flicker due to
SCC Power Gatingis addressed by 0x82 microcode
BRANCH=glados
BUG=chrome-os-partner:44663
TEST=Check if display flicker is gone when SCC is power-gated
Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba
Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3
Original-Signed-off-by: Medha Garima <medha.garima@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329651
Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com>
Original-Tested-by: Jenny Tc <jenny.tc@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331172
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to save more power by shutting down clocks add the
ability to optionally clock gate the 8254 programmable interrupt
timer. When doing this the platforms lose their "PC"-ness which
certain payloads and OSes rely on such as SeaBIOS.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Enabled option on chell. Noted the bit is set upon booting.
Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477
Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331171
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13985
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode
has been updated since v76, and it requires an an extra VR mailbox
command should be sent from coreboot to pcode.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
CQ-DEPEND=CL:329393
Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2
Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329480
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13983
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adding an option to enable VR specific mailbox command.
When set, an extra VR mailbox command specifically for
the MPS IMPV8 VR will be sent.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917
Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329393
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13982
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The previous copy of FspUpdVpd.h was not up to date w.r.t. the
FSP release being used for skylake boards. Fix that.
BUG=chrome-os-partner:50863
BRANCH=None
TEST=Built and booted on chell.
Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7
Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331290
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13984
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
NOR flash has a hardware limitation that it can't access SRAM region
after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000
for NOR flash driver. So that the NOR flash driver can use this region
after 4GB mode is enabled.
BRANCH=none
BUG=chormoe-os-partner:49229
TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram.
And check /proc/meminfo.
Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e
Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327962
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331177
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13989
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect
the DRAM size at runtime.
BUG=chrome-os-partner:49427
BRANCH=none
TEST=Boot to kernel
Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223
Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327961
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331176
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DRAM size can not be determined before DRAM is initialized. Since
mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of
2GB DRAM address before DRAM is initialized.
BRANCH=none
BUG=none
TEST=boot to kernel
Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a
Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327960
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331175
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13987
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=none
Change-Id: Icf397ce2ffdaed5048367daf2086c067984fea0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b5a88793ccfc46af196300791a300be67b70f5b1
Original-Change-Id: I75adf2688c9c8b9a2338f7dee5d0ac10e7181529
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321056
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13981
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Runs the LITTLE core at highest freqency to speed up the boot time.
Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward
compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.)
BRANCH=none
BUG=chrome-os-partner:47422
TEST=flash the bootloader and measure the boottime by cbmem result
Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161
Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324685
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev2
Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb
Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db
Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/323932
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add multi-bytes read support.
BRANCH=none
BUG=none
TEST=saw edid log and dev screen
Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306
Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20
Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/325211
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13978
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=none
Change-Id: If7244d0050833c676de72106d1c8473dd8f290a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 89356785e66eb6d5b52fdf09933d2d28d9f67a90
Original-Change-Id: I94dda9834da6553795e7f3f65ff267fdcb6b7d47
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321055
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13977
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reset pin of USB Hub is connected to GPIO118, it is low active.
Config GPIO118 as GPO and output high.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df
Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd
Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321054
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: Ibdafa4ffe0baf5231654e67612b7ca59d835b602
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 63fedfec26ba1444934e348ce59609fa88e12de5
Original-Change-Id: Ifbbf8d2b3b6e163481843308c2e3edc4a55f90c6
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319988
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I65aa87e88cf812fdb490933de1a3b121866a2694
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8f703f7e71ae6ffc0f1ac0e70486d087a28da5ba
Original-Change-Id: I8d794464d45ea69f9a46f7ebc505f6ec2127f204
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319987
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13974
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge coreboot
Change-Id: Ic46490a56a6a8146b91a055b9ce5d5bb23bc7a49
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 082ce1848bf37bba369fd0dccc4cf3fc83a8a018
Original-Change-Id: I58f009d2fc03cf5a52b4dbd042a92973cde4d035
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320029
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13973
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=none
Change-Id: Ib44a9e8ca94727809e47831228f4742c25a53977
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: da9185c22264440da822aa252c0c5d2aef78b455
Original-Change-Id: I98c2ad757d0cd0e3234e49392091784b43a106e7
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320028
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13972
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: Ic2019a1d61cbc5949c1f42346b279ef05f725dfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf13606f01438bc2ea27ecccc6359a7320dc34cc
Original-Change-Id: I3fcc403cb7a3429b9673be0e727fc7d8c9d4f556
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320027
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13971
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5.
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd
Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320026
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13970
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: Ifdeb686f7695fbefadc15d47e9b0c49b6b35c37d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2404a31dac8c84580424fc01816669b27ddf8617
Original-Change-Id: I831d34b1bce2675caa3da8da7a214f392e561000
Original-Signed-off-by: Milton Chiang <milton.chiange@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320025
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13969
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot to shell on Rev3
Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56
Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303207
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13104
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
[pg: add the code, but don't actually enable the support yet, because it
relies on code that still needs to be merged to arm-trusted-firmware.]
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I9ea3ce6c8f79dd427be67f30bc940d2038173b81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: I8aa9ca0fce804cc1682947b7e184781dd5d437f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I3ed8bad1bdc7d17e334e0136f92a51c8e7ba4e67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e
Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6
Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292692
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13106
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
