Age | Commit message (Collapse) | Author |
|
Change-Id: I749be0044be04b044ff82e96aff8093f4b0d295e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Provide the option to disable XHCI LFPS power management.
If the option is set in the devicetree, the bits[7:4] in
XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated
from default 9 to 0.
BUG=b:146768983
BRANCH=None
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: Ic603e3b919d8b443c6ede8bb5e46e2de07fcb856
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I50ac6914fadc02491df2eccb437eada89fd12b82
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on dedede.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:152019429
Change-Id: I7ba635f5504ba288308d7d7a4935f405f289aa8d
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
* Add FMAP for measured boot only, with a single RO partition.
* Add FMAP for measured boot only, with a single RO partition
but where the ME has been shrunken.
Tested on X220 using VBOOT+measured boot:
* Used patched IFD and ME, boots into OS
Change-Id: I04c1add13198444638c669deec1e05159b1a09c9
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
|
|
Some features are made mandatory, meaning that some platforms have
been dropped from master. This also explains that further development
on these popular platforms can happen on the 4.11 branch.
TODO is this really the right place or is it too technical for release
notes?
Change-Id: I95e01c301e7db6f81ef88a89d709ebab35c9ccfb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add a function to dump ME Host Firmware Status registers.
BUG=None
BRANCH=None
TEST=Build and boot iclrvp.
Change-Id: I9430189665c94decb2e64680d28a7390ee6e912c
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Add a function to dump ME Host Firmware Status registers.
In tigerlake, Manufacturing mode is “No” if below conditions are satisfied, indicating
end of manufacturing. Otherwise, manufacturing mode is "Yes".
1. Intel fuses are programmed (Indicated by HFSTS6[30] bit set)
2. The SPI flash descriptor region is locked. (Indicated by HFSTS1[4] cleared)
BUG=None
BRANCH=None
TEST=Build and boot tglrvp.
Change-Id: I831a51f9f482425bd3b97ef1d2404b1d06844d07
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Make use of print_me_fw_version() which is defined in the CSE lib to
print ME firmware version information for icl,tgl.
BUG=None
BRANCH=None
TEST=Build and boot iclrvp, tglrvp boards.
Change-Id: Ief75403c490eee499a84372e54fa38ea3016cc11
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
BUG=b:151166040
TEST= build and boot volteer and check LTR and AER value
from FSP log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8ab7667d788563ffcb9287a64254590ef9bea5d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40269
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:151166040
TEST= build and boot volteer and check LTR and AER value
from FSP log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ibbf55e6a08ff5e8f358325bb8e9f1487cc982f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40268
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add LTR and AER configuration to the root ports config.
BUG=b:151166040
TEST= build and boot volteer and check LTR and AER value
from FSP log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I668f2e5fea15019a9e5ae06fb4d55fa2aea69e8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40262
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Intel Document #616599,
1) SPD byte offset #5 for Tiger Lake should be "0x21" (16 rows, 10
columns)
2) SPD byte offset #13 for Tiger Lake should be "0x01" (1 channel
x16)
This change fixes those two values in the existing SPD files for
Volteer, and zero's byte 9 (bytes 8-11 should be zero'd out in a
generic SPD).
BUG=b:152827558
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
Volteer to kernel.
Change-Id: Ice6a32a2b3827cf99d8e109731ffd9efabf68de1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Fix GPIO_PCH_WP (GPP_B11) to associate GPP_PCH_WP with community
zero instead of community 1.
BUG=b:152876091
TEST="emerge-volteer coreboot chromeos-bootimage", flash, boot to
and log into Volteer kernel, execute "wp enable" in H1 console,
execute "crossystem" at kernel prompt and verify that "wpsw_cur"
shows as being "1", Execute "wp disable" in H1 console, execute
"crossystem" at kernel prompt and verify "wpsw_cur" is 0.
Change-Id: I082154efd72459ec54999ed7c7bb7420a38f7b6e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently coreboot is using the compatible ID PNP0303 for all keyboards
and PNP0F13 for all pointing devices, which causes some problems. On
Windows, the touchpad driver can't be automatically matched and
installed through Windows Update. On Linux, there are some strange
issues. So it's better to use the original hardware IDs for each model.
The hardware IDs for the following models can be found By searching for
dmesg logs on vendor BIOS:
T60: https://mail.gnome.org/archives/networkmanager-list/2012-January/msg00110.html
Keyboard: PNP0303 Pointing: IBM0057
R60: https://openbenchmarking.org/system/1202279-AR-COMPRESS715/Lenovo%20R60/dmesg
Keyboard: PNP0303 Pointing: IBM0057
X60: https://github.com/pavelmachek/missy/blob/master/db/notebook/lenovo/thinkpad/x60/pavel/2018.3648803539788/dmesg.out
Keyboard: PNP0303 Pointing: IBM3780
X200: https://ubuntuforums.org/showthread.php?t=1833248&page=2
Keyboard: LEN0010 Pointing: IBM3780
T400: https://github.com/heradon/libreboot-fork/blob/master/docs/future/dumps/logs-t400-bios2.02-ec1.01/dmesg.log
Keyboard: LEN0010 Pointing: IBM3780
T510: https://bbs.archlinux.org/viewtopic.php?id=120287
Keyboard: PNP0303 Pointing: LEN0015
T410: https://forum.ubuntuusers.de/topic/kein-sound-109/
Keyboard: PNP0303 Pointing: LEN0015
T420: https://linux-hardware.org/index.php?probe=e6a094ade5&log=dmesg
Keyboard: PNP0303 Pointing: LEN0015
T420s: https://bbs.archlinux.org/viewtopic.php?id=191510
Keyboard: PNP0303 Pointing: LEN0015
T520: https://bbs.archlinux.org/viewtopic.php?id=195636
Keyboard: PNP0303 Pointing: LEN0015
W520: https://linux-hardware.org/index.php?probe=9306cac54c&log=dmesg
Keyboard: PNP0303 Pointing: LEN0015
T430: https://github.com/farjump/fwtr/blob/master/lenovo/thinkpad-t430/2347ds2/lenovo/g1et73ww-2.09/fwts/20160218_174223/dmesg.log
Keyboard: PNP0303 Pointing: LEN0015
T430s: https://linux-hardware.org/index.php?probe=01545dc8fb&log=dmesg
Keyboard: PNP0303 Pointing: LEN0015
T530: https://forums.fedoraforum.org/showthread.php?316640-Fedora-27-High-CPU
Keyboard: LEN0071 Pointing: LEN0015
W530: https://bugs.freedesktop.org/attachment.cgi?id=115557
Keyboard: LEN0071 Pointing: LEN0015
L520: https://pastebin.com/U6MaBAY3
Keyboard: PNP0303 Pointing: LEN0017
X201: https://linux-hardware.org/index.php?probe=d7085ee4c8&log=dmesg.1
Keyboard: PNP0303 Pointing: LEN0018
X220: https://bbs.archlinux.org/viewtopic.php?id=237669
Keyboard: PNP0303 Pointing: LEN0020
X230: https://forums.bunsenlabs.org/viewtopic.php?id=2460
Keyboard: PNP0303 Pointing: LEN0020
X131e: https://linux-hardware.org/index.php?probe=d765880811&log=dmesg
Keyboard: MSF0001 Pointing: LEN0026
X1 Carbon Gen 1: https://bugzilla.kernel.org/show_bug.cgi?id=85851
Keyboard: LEN0071 Pointing: LEN0030
s230u: https://launchpadlibrarian.net/147231958/dmesg-reboot.txt
Keyboard: PTL0001 Pointing: LEN0031
T540p: https://linux-hardware.org/index.php?probe=da766a30bc&log=dmesg
Keyboard: LEN0071 Pointing: LEN0034
X240: https://linux-hardware.org/index.php?probe=fa7155b0e4&log=dmesg
Keyboard: LEN0071 Pointing: LEN0035
T440p: https://bugzilla.kernel.org/show_bug.cgi?id=91541
Keyboard: LEN0071 Pointing: LEN0036
T440s: https://bugzilla.kernel.org/show_bug.cgi?id=91541
Keyboard: LEN0071 Pointing: LEN0036
T450: https://gist.github.com/kzar/1c38630eb22e4bf5b976
Keyboard: LEN0071 Pointing: LEN200e
Others:
https://github.com/torvalds/linux/blob/master/drivers/input/mouse/synaptics.c
Test result: This can make Windows automatically install the Lenovo
touchpad driver. It also fixes the T440p touchpad issue.
Change-Id: Ifb635da99c5e05f987aaf4f172108d788dcc2932
Signed-off-by: dalao <dalao@tutanota.com>
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36371
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current flash layout requires changes to the descriptor area to
create the 9MB BIOS region.
Add fmd files that allow switching to coreboot by only replacing the
BIOS region.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I2b003018e245693934202505d7e3891c2f545e6c
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Make it easier to use measured boot with stripped ME by
providing the corresponding FMAPs.
Change-Id: I1763583a42bbc91e6acc06b262deab10d34447a3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Tested on W530
Change-Id: I9be0c5e06fcb8287d32171cb72dabb5fcf047e7a
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39450
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the pointer for vboot_reference so it can be used to compile
depthcharge payload on the master branch.
Change-Id: I5fc6e05896d7221a1e48ca86c6b15081488302b5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The QEMU XHCI controller does not support byte/word reads from the
capability register and it expects dword reads only.
In order to make this work move the access of the capability
register fields to use macros instead of a packed struct bitfield.
This issue was filed upstream:
https://bugs.launchpad.net/qemu/+bug/1693050
The original fix attempt in 2012 was not effective:
https://github.com/qemu/qemu/commit/6ee021d41078844df60a3a466e3829a3e82776f3
With this change the controller is detected properly by the libpayload
USB drivers.
Change-Id: I048ed14921a4c9c0620c10b315b42476b6e5c512
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Kernel relies on the USB MUX interrupt to configure USB devices that
are connected on the Type-C ports for TGL. Adding in the Q1C Interrupt
so the Kernel can properly receive and configure USB devices
BUG=b:152902608
TEST=buld_packages for volteer and verified that Proto 1 and Proto 2
are now seeing extcon events
Change-Id: Ie3a2f829a295f090a03e72e12f19ecc5bb724952
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Prashant Malani <pmalani@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add structs and methods for revision 3.
Change-Id: Ida75f530551ad2b8b20ce7fdeffb3befc51296bc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Some of the revision 4 FADT fields were already updated to ACPI
spec revision 6, but not all of them. In addition the advertised
FADT revision was 3.
Implement all fields as defined in version 6 and bump the advertised
FADT revision to 6.
Also set all used access_size fields and x_gpe0_blk to sane values
as Windows 10 verifies those fields starting with FADT revision 5.
Fixes: https://ticket.coreboot.org/issues/109
Tested on Windows 10.
Change-Id: Ic649040025cd09ed3e490a521439ca4e681afbbf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
- Configure devicetree for enabling GbE on variant
and remove from baseboard.
- Configure Kconfig to enable GbE region.
- Configure fmd to incorporate GbE.
BUG=b:151102809
Cq-Depend: chrome-internal:2843183
Signed-off-by: Varun Joshi <varun.joshi@intel.corp-partner.google.com>
Change-Id: I1c36b132546049e3e775585c41164072f4ece73e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
For Deltaur and Deltan variants return proper SKU ID based on EC
firmware type and sensor detect GPIO value
BUG=b:152544516
TEST=make build successful for deltan
Change-Id: I20a497739e5062400b093648c3a634203dec6105
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Update dq, dqs map based on deltan schematics.
Configure memory to read SPD.
BUG=b:151702387
Signed-off-by: Varun Joshi <varun.joshi@intel.corp-partner.google.com>
Change-Id: I29059f09dd08c81b5ca5fe1215f33871835703fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add header file from keycodes from Linux sources. This is needed so
that coreboot can provide scancode to keycode mappings in the ACPI
that the linux kernel expects (https://lkml.org/lkml/2020/3/24/588)
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I40051cb63a6c154728887ac9b0521bc671b2a518
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40029
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Linux kernel UAPI header files are licensed under
/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
Allows files with this license to be included in coreboot.
For more details about this particular license:
https://www.kernel.org/doc/html/v4.17/process/license-rules.html
https://spdx.org/licenses/Linux-syscall-note.html
Change-Id: I4f0f8d36c637a66a6999a18321fdbc4c42d5751e
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update memory configuration on Tiger Lake platform to enable Early
Command Training. This feature was not supported before FSP v2527.
BUG=b:150357377
BRANCH=None
TEST= Build and boot volteer
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I674c30f4dfc1af6c0c4a460d66684545a190caf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40023
Reviewed-by: Dossym Nurmukhanov <dossym@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When EC_GOOGLE_CHROMEEC_SKUID is selected provide an
implementation of smbios_mainboard_manufacturer() so the code
doesn't need to be duplicated in the mainboards.
BUG=b:153767369
Change-Id: Ib65fe373a79d606cffcba71882b0db61be5a18c3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a definition for a software SMI to allow AMD systems supporting
the MboxBiosCmdSmmInfo command to properly initialize the PSP.
BUG=b:153677737
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I1d78aabb75cb76178a3606777d6a11f1e8806d9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40294
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Family 17h redefines the PSP command and status, and therefore the
steps required to send commands via the mailbox. Convert the existing
version into a v1 and add a v2. New Kconfig options allow the soc to
choose v1 vs. v2.
The v2 PSP begins responding to the mailbox command when the full
bit range is written. Define the new mailbox as a union of a u32
and a structure.
Additional PSP details may be found in the NDA publication (#55758)
AMD Platform Security Processor BIOS Architecture Design Guide for
AMD Family 17h Processors
Change the existing two soc functions that return pointers to void
pointers.
BUG=b:153677737
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d358fdae07da471640856f57568059e9487f6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I8ff5a9275d4cdf0049b63cc30b8a1cc376b50f80
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable S0ix from devicetree for JSLRVP
TEST= Build, boot JSLRVP and Verified S0ix is
working by running "echo freeze > /sys/power/state"
from kernel console.
Change-Id: Iedbd7ce9db546f8dc6cb3343fa624abde0ef0d3f
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Enable audio for Jasper Lake RVP board. It has 2 Audio codec chips
connected on I2C0: DA7219 and MAX98373
1. Enable Kconfig to enable I2C drivers for both chips.
2. Make necessary devicetree changes to enable FSP UPDs and ACPI entry
for I2C0.
3. Enable audio related GPIO configurations.
BUG=None
BRANCH=None
TEST=Checked that dmic and speaker are functional on Jasper Lake RVP
Change-Id: Ibf76eb36c478bd33cbc0c86099236452b397fcc5
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39695
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove EMMC and SD card ACPI devices copied from Ice Lake.
Tiger Lake does not support these controllers.
BUG=b:151208782
TEST= Build volteer board
Change-Id: I4b3e37f93b94757d16d775fb27bee644d9dc539e
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40228
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change disables MrcSafeConfig option during MRC training.
MrcSafeConfig was enabled as part of the early testing.
Now with FSP 2527, there is no need to set this config anymore.
BUG=b:150357377
BRANCH=master
TEST=build and boot ripto/volteer
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I4e4069d83754aaf1e4885d6912ab2a6d506c5269
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40106
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP headers for Tiger Lake platform generated based FSP
version 2527. Which includes below additional UPDs:
FSPM:
- PchTraceHubMode
- CpuTraceHubMode
- CpuPcieRpEnableMask
FSPS:
- D3HotEnable
- D3ColdEnable
- RtcMemoryLock
- PchLockDownGlobalSmi
- PchLockDownBiosInterface
- PchUnlockGpioPads
- CpuMpPpi
- ThcPort0Assignment
- ThcPort1Assignment
BUG=b:150357377
BRANCH=none
TEST=build and boot ripto/volteer
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I0cdce28b01f291dbb02a01ded7629e94c77b7e47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40026
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide CROS_SKU_UNKNOWN and CROS_SKU_UNPROVISIONED defintion so
callers can utilize the default and failing value without open coding it.
BUG=b:153642124
Change-Id: I447004e9016b6ab3306ea532721494ebbcda741d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40299
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify board name from "Kadadu" to "Kakadu"
BUG=b:153590144
TEST=CPU log show "Starting depthcharge on Kakadu..."
BRANCH=kukui
Signed-off-by: Scott Chao <scott.chao@bitland.corp-partner.google.com>
Change-Id: Ibf387b0e0153315ff2ab5c19381db44a61c14e96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40283
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8a1eadcdc51dedd1e17eb6ae7847d9209b2bd598
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I02979a0632a7b356985f96c3ba239daba178b4e3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39989
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The NEC uPD720200A USB 3.0 controller on the T420s is actually
connected to PCIe root port #5 on the PCH, not #7. Enable RP#5,
disable RP#7 and update comments accordingly.
Test=USB 3.0 controller shows in `lspci`
Change-Id: I21ac72fd5632e552bdcdbd573cf92b433ed545ff
Signed-off-by: Jake Mannens <jakem_5@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=b:150872580
TEST=Build waddledoo board. Verify EMMC and SD card ACPI devices are
present in dsdt.asl.
Change-Id: I70d47455c48990afe9e79c013c5272d70f4f71e7
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
TEST=Build and boot the mainboard. Ensure that the touchpad is
operational.
Change-Id: I937462cd3992a884194bbd1759a0802a147e925a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Current pin-ctrl kernel v5.4 driver expects the firmware to publish
single GPIO ACPI device. Until kernel pin-ctrl driver implementation is
updated to consume community based GPIO ACPI device, update the current
ACPI code to comply with pin-ctrl driver requirement.
BUG=b:150154277
TEST=Verify intel pin-ctrl driver can successfully load in OS
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: Ifcc92adaee550182ab405541ea85019f31bb8658
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
According to the EDS, EC_AP_PWR_BTN_ODL has a default internal pull-up
of 20K. Retain it during the GPIO pad configuration.
BUG=b:150985246
TEST=Boot the mainboard.
Change-Id: I042ba70f78fca1a5b9eda30029df97b3f8e65656
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39852
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implemented for functions that need to log system events into BMC,
the information of system events can be specific.
TEST=Use ipmitool and execute "ipmitool sel list" command to check
if SEL is added into BMC.
Change-Id: I38f3acb958d12c196d33d34fd5cfa0b784f403b7
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=b:153515968
TEST=Able to boot to kernel
Signed-off-by: Scott Chao <scott.chao@bitland.corp-partner.google.com>
Change-Id: I699f6d7ba3af01436f10c9a59af4a22fc45aa300
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40270
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4acfb9d9911e251a494b6d35d76226c06e7858d6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
'result' is already defined as 'unsigned long long result = 0;' so no
need to re-write 'result = 0;'.
Change-Id: Ie897453fb5e7b09af755ce8d61ee8e80943ffc1c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
`.read_resources` and `.set_resources` are the only two device
operations that are considered mandatory. Other function pointers
can be left NULL. Having dedicated no-op implementations for the
two mandatory fields should stop the leaking of no-op pointers to
other fields.
Change-Id: I6469a7568dc24317c95e238749d878e798b0a362
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Providing an explicit no-op function pointer is only necessary for
`.read_resources` and `.set_resources`. All other device-operation
pointers are optional and can be NULL.
Change-Id: I3d139f7be86180558cabec04b8566873062e33be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support to configure DDR4 memory variant.
-Add support to read SPD data based on different memory topology.
-Initialize FSP UPD's for DQ and DQS mapping.
BUG=b:151702387
Signed-off-by: Varun Joshi <varun.joshi@intel.corp-partner.google.com>
Change-Id: I47a5dcad3ee316871a6103b9d53ef7f6fc88d7d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39847
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I294ea867678ad77e454873ecf4948bf2d12c9f80
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It turns out the linker's error message already includes the line
number of the dead_code() invocation. If we don't include the line
number in the identifier for our undefined reference, we don't need
individual identifiers at all and can work with a single, global
declaration.
Change-Id: Ib63868ce3114c3f839867a3bfb1b03bdb6facf16
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I2a87e5c0f598d665f1c64ac8cfe235918326d1d5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3c8d430a10562edd4404d322e78f603cae191026
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
unmount -> umount. My mistake.
Change-Id: I5d1b675f6ab7c027f2e646424adb1f255967c753
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set IgdDvmt50PreAlloc to zero if InternalGfx is disabled. It's 'correct'
to do it like this, otherwise the FSP would always allocate memory for
the IGD even if it is disabled. In addition the FSP enables the graphics
panel power even if no IGD is present which leads to a crashing FSP.
Thus, if no IGD is present we switch off the panel via UPDs.
Refer to this issue on IntelFSP for details:
https://github.com/IntelFsp/FSP/issues/49
Tested on:
* CFL platform with IGD
* CFL platform without IGD
Change-Id: I6f9e0f9855224614471d8ed23bf2a9786386ddca
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
nvramcui requires use of CMOS for NVRAM configuration,
so depend on HAVE_OPTION_TABLE and select USE_OPTION_TABLE
to ensure that nvramcui is actually functional when included
in a build.
Change-Id: I0595514f636b8ce67bbc789ecc96a93c99068c50
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change replaces all uses of ec_current_image with ec_image since
Chromium OS EC has deprecated (sha 78d1ed61d) the use of enum
ec_current_image and instead changed it to enum ec_image.
BUG=b:149987779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7e45ea6c736b44040561f0f8a80f817ade8db864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change copies ec_commands.h directly from Chromium OS EC repo at
sha b3c3f6a8f.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I940f5c7fe8ad4d989a1dfcd6da3ccf9fc151ec56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ib156ebede1ee24a1c7bd20d01792ec80cba8f37d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I816cfe0e3114fe270c6c48014705dbee3b10fd50
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I879dd2fc61bc385486b506e2123f32629a67f518
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I4b33b42f41c7e34c5eab70edf2f12862816220d8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If57d785b92f0f09d9def90b8ac87833321e3cfcf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In some cases Hatch variants are not laptop form-factors such
as Puff. Ensure that the base configuration does not assume
the form factor and allow variants to elect their intended
use-case.
Note that the issue is that early ec sync needs to be
disabled for EFS2 to function correctly, see commit 6daa8c3ba5f
from the FIXME line. The relationship is that desktops do not
have a battery.
BUG=b:152951181
BRANCH=none
TEST=none
Change-Id: I15dc9efa51e9d61297868df287879dfb62909e33
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40252
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: I40c4447579cfbf2b9c52dcfaa34f34b22f75c89c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39332
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add vbt file extracted from the vendor UEFI blob version 0524.
Change-Id: Idd39065e9cf5a420317d79695cf032713173eeab
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
get_soc_config was a reimplementation of config_of_soc, so drop
get_soc_config and cfg_util.c.
Change-Id: I007c83cfe5063130c18819925844b6c643cf0232
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
get_soc_config was a reimplementation of config_of_soc.
Change-Id: I73c6a84703e22d6778b830f4bb82419361c85ff7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Apply initial DPTF parameters for nightfury from internal thermal team. Will update after further thermal/performance tuning.
BUG=b:149226871
BRANCH=firmware-hatch-12672.B
TEST=built and verified FAN worked by DPTF active policy
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I712bdd8edc999ef7ee33f4adf21893be12e86bec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Allow the use of the common/gpio driver to create Lewisburg PCH pad
configurations for server motherboards with Skylake-SP processors.
This patch should only be applied after adding Lewisburg PCH definitions
to the soc/intel/xeon_sp code [1].
[1] https://review.coreboot.org/c/coreboot/+/39425
Change-Id: I4a8e83cad0729bbbb50ba5a2b336f6cf7c1eca13
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow to print a debug error message when the GPIO community does not
contain the pad number from the motherboard configuration.
Change-Id: I21fb389a5d29e11b1fbc24e836d91e17957047f1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
|
|
Adds definitions that allow to use the common GPIO driver to configure
the Lewisburg PCH pads. Using the GPIO configuration from common/gpio,
unlike the FSP-style definitions from Intel RefCode [1] definitions,
is more understandable and makes the motherboards code much cleaner.
In addition, we can use utilities, such as inteltool, to analyze the
configuration of proprietary firmware to add support for new server
motherboards with Skylake-SP processors.
The pin layout in this patch corresponds to the pinctrl driver in the
Linux kernel v4.14 for the Lewisburg PCH GPIO controller [2].
[1] https://designintools.intel.com/product_p/stlgrn45.htm
[2] drivers/pinctrl/intel/pinctrl-lewisburg.c
These changes are in accordance with the documentation:
[*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US.
Change-Id: Idde32fdd53f1966e3ba6b7f5598ae8f51488d5a5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39425
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add all Intel WIFI 6 series PCI ids to device/pci_ids.h file.
TEST=Harrison Peak (HrP) Wi-Fi module is getting detected during PCI enumeration.
Change-Id: Id5452c5c02b58e84d8e5768653b18c9d1246c1bb
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40224
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit c04871a398ca945b42fde0867572094c38f6f92c.
Reason for revert: Many apu2 users reported issues with PCIe modules
detection in mPCIe2 slot (4x GFX PCIe). The regression was not caught
by 3mdeb validation stands and hardware configuration.
Change-Id: I609bf4b27c88a9adf676d576169f5ca26726ee86
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40147
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set some things missed originally because of formatting issues
in the BIOS spec. Values were compared with a vendor dump.
Change-Id: I27360d6ea5d1f00b1ed350f47ff40a22f19dfb05
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40231
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Assignment of PCI resource registers is up to the allocator. Therefore,
drop override of the PCI resource register.
Change-Id: I184a263c81aa8a434fcd153406b73058914cb2f9
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The interrupt line registers are configured in a central place,
pch_pirq_init() in `lpc.c`, according to the PIRQ configuration.
Hardcoding values here makes no sense.
Change-Id: Ide5f101b2e5bda84f3c2ff8c8ca636b8233bb948
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
HSA -> HDA (High Definition Audio)
Change-Id: Ic0e6ad7b26105fdd6eca6cd11edcf2236e5c7123
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
According TCG PC Client Platform Firmware Profile Specification Revision
1.04 Chapter 8.1 the TPM device object should have the _CID and _HID
values set to MSFT0101 for TPM2.
FreeBSD also detects TPM2 device using MSFT0101 _HID and _CID only.
TEST=boot FreeBSD 12.1 on PC Engines apu2 and check in dmesg that TPM2.0
is detected
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I45123f272038e664b834cabd9d8525baca0eb583
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39699
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use defined structures to assemble IVRS and IVHD entries. Additionally
assemble IVHD type 11h which supersedes IVHD type 10h. In order to
utilize all IOMMU features firmware should also expose IVHD type 11h.
The new type is already supported and parsed since Xen 1.13. IVHD
type 10h should still be present for backwards compatibility.
TEST=boot PC Engines apu2 and disassemble IVRS using newest IASL,
boot Xen 1.13 or newer with debug enabled and see IVRS IVHD 11h parsed
in xl dmesg
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9a2c24b67adfa8ebd718caeb5eec88687dcbcc9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on volteer /
dedede.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:152019429
Change-Id: If940a76d36a7645a7441ba418aa7aec9af9f6319
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Since the first LFPS timeout causes xHCI to enter compliance
mode, the SS hub cannot be enumerated. The resolution is to
disable xHCI compliance mode.
BRANCH=octopus
BUG=b:149723583
TEST=Verified USB operation successfully.
Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com>
Change-Id: I3e6ab6ec0c4865cf2467da900f13d18468ff356f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I482715c166ccf5d2f3cc25118d25b07dbfd6650a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I3fdfa159194cccf15c0284700f554d2241dad6cd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I2efdeb224c478995d393aa3eaac762c876832391
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I1edbc8bb0efaad033385f29f8a4747bd178296b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: Ib1e226e7816efbc5cffc95563b440fb2ad5b1f95
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I48422453735d50eb9292f39a3c031073d647a17c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I8995372760543e9cf2c845019f7a063046c55e9c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: Ib41169395ab239e520f6047ac6bd307ec50776d4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: Ic5a920bfe1059534566ceab85a97219dd56f069e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I45d746ed374361036d59167293a90d8e557754fa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I7354edb15ca9cbe181739bc2a148f16bb85ab118
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I703a656c397345025dab398fb642f3de7bbb61fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40220
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I3c6daa484a4aa133ff2ad79eb2b8efa159da3523
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|