summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-06nb/intel/nehalem: Don't run graphic init on S3 resumeArthur Heymans
The assumption is made that an ACPI aware an OS does not rely on firmware to initialize the display. TESTED on a Lenovo Thinkpad X201 with Linux 5.2, display still works after S3, more than 200ms in time saved (dropped from 411ms to 182ms in total in one test). Change-Id: I36219e6d04db561d4f2ddb6e962166c598d5bc4f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-06nb/intel/nehalem: Move PCH init to sb/intel/ibexpeakArthur Heymans
This change does the following: - Move PCH init code from the common romstage to sb code, this allows for easier reuse in bootblock - Provide a common minimal LPC io decode setup, mainboards can override this in the mainboard_lpc_init if required - Set up LPC generic IO decode up in romstage based on devicetree settings - Remove the ramstage LPC generic IO decode from ramstage as this is now done in romstage.c - Get rid of unneeded setup of spi_read configuration in BIOS_CNTL as this is already done in the bootblock. Change-Id: I3f448ad1fdc445c4c1fedbc8497e1025af111412 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-06nb/intel/nehalem: Move romstage boilerplate to a common locationArthur Heymans
Move the mainboard_romstage_entry to a common location and provide mainboard specific callbacks. Change-Id: Ia827053617cead5d2cf8e9f06cb68c2cbb668ca9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-10-06nb/intel/nehalem: Don't link walkcbfs.S in romstageArthur Heymans
Change-Id: I5bb0c38353d340cc5d356fba299a4460e3f5bddc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35770 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06sb/intel/ibexpeak: Don't clear PMBASE regs in romstageArthur Heymans
X201 boots fine without it. Change-Id: I20a8e598b07bf0a059dcb47651d1a26456863673 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35769 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06sb/intel/ibexpeak: Implement USB current settingsArthur Heymans
This is based on the sandybridge settings. The current lookup table comes from the x201 vendor lookup table. Tested: USB mouse and webcam still work and current registers are the same as before. USB IR are not but the code follows EDS instead of the register replay. Change-Id: Icea9673623a62e7039d5700100a2ee238478abd1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35762 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06intel/ibexpeak boards: Remove undocumented reset defaults from RCBA replayArthur Heymans
The values read back in those ranges are identical before and after this change and the Lenovo Thinkpad X201 still boots fine. Change-Id: I406510e0573ac97003da7d97181abdfbfd2a872f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35760 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06intel/ibexpeak boards: Remove handled RCBA entries from replayArthur Heymans
The RCBA registers 0x3400-0x3500 are all handled elsewhere in the code, so no need to have a 'replay' of those. The remainder now consist of USB setup and undocumented bits that should likely not be touched at all. Change-Id: I69fc8a5e16f7cf0e1068d0d2ed678a6c2f6e70a9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-06sb/intel/ibexpeak: Fix enabling HPETArthur Heymans
RCBA_HPTC needs to be read back to properly work. This fixes SeaBIOS endlessly waiting for input instead of booting the default entry. Linux already fixes this itself. Change-Id: I22b8b34924f2add2185ec46470c1559bf2fb6d58 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35757 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06sb/intel/ibexpeak: Implement PCH function disable in chip_opsArthur Heymans
This does the following: - implement a PCH disable function that will be called by the PCI drivers as part of their chip_ops - removes the iobp_x calls as those don't exist on ibexpeak - complete the devicetree with to be disabled PCI devices for the chip_ops to be called - Clean up some code copied from bd82x6x Change-Id: I78d25ffe9af482c77d397a9fdb4f0127e40baddc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-10-06nb/intel/nehalem: Remove bogus GT PM initArthur Heymans
This was simply copied from sandybridge/gma.c. All these registers read back 0xffffffff or 0 or don't respond to reads. Change-Id: I094e7caa889a3175477aa78b91545ca804d423c8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35746 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06nb/intel/nehalem: Disable PEG and IGD based on devicetreeArthur Heymans
Tested on Thinkpad X201: PEG device hidden. Change-Id: Ib378458a55e18cc02fc49b3e6d6939d31dd4aa65 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35744 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-06nb/nehalem: Remove bogus MCHBAR writesArthur Heymans
On these CPUs the MCHBAR window is 16KiB large. This code was just copied from SNB. Change-Id: I263cfc678a2eb8eeee8ab9157c749359064a9be8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-06sb/intel/ibexpeak: Add CIR initializationArthur Heymans
This properly sets up the chipset initialization registers, instead of replaying an RCBA dump. The information is taken from the EDS and from the thinkpad x201 vendor BIOS disassembly and from an HP UEFI. TESTED on Thinkpad X201. Seems stable at booting, rebooting and resume from S3. Change-Id: I21c2beaf70da27dbe6a56e2612df2c257c05fc62 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-06intel/fsp_broadwell_de: Rename from xx_DEV_FUNCKyösti Mälkki
Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: I1a8675a4e613a8efc135b05cde36f166acaa7ed4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-10-05soc/intel/common/block/p2sb/p2sb: Add missing PCI IDsPatrick Rudolph
The code is compiled on SKL/KBL, but the P2SB PCI IDs were missing. Add them to make sure that the BAR0 doesn't change when running PCI resource allocation. Change-Id: I7cffbbc7d15dad14cccd122a081099b51dc1ce07 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-05kontron/986lcd-m,roda/rk886ex: Drop secondary PCI resetKyösti Mälkki
The extra PCI bus RST# and 200ms delay there was workaround for custom add-on hardware. Change-Id: I38c4677cfb41d620498be8e0c257b517995bad5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-05intel/i945,i82801gx: Refactor early PCI bridge resetKyösti Mälkki
Change-Id: Ibd5cd2afc8e41cc50abdda0fb7d063073c3acdc1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35678 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-05intel/fsp_baytrail: Define PCH_DEV_SLOT_I2C1Kyösti Mälkki
Change-Id: I02c08b847fa1523e3296bdf9e3db5a7a322df72e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-05intel/fsp_baytrail: Rename from xx_DEV_FUNCKyösti Mälkki
Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: Id78e594ae6490d39df76317f8fc3381fe681dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-05sb,nb/intel/fsp_rangeley: Rename from xx_DEV_FUNCKyösti Mälkki
Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: I6ead2bc5e41a86c9aeef730f5664a30406414c8c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-10-05util/sconfig: Issue header for exposed PCI and PNP namesNico Huber
Let `sconfig` output a C header file with the symbol names that we generate since 5e2a2cd5e7 (util/sconfig: Expose usable PCI and PNP device names). We add another command line argument for the path to the header file. As the file is similar in nature to our `config.h` we simply put it in $(obj)/ too. Change-Id: I8f87288c82f2844b61eba6534797a42b978b47bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-04acpi_table_header: Replace hard-coded revision via macro and functionHimanshu Sahdev
Minimize use of hard-coded value for acpi_table_header->revision to soft code. Replace with macro defined in arch/acpi.h for FADT and with the get_acpi_table_revision function for SSDT. Change-Id: I99e59afc1a87203499d2da6dedaedfa643ca7eac Signed-off-by: Sourabh Kashyap <Sourabhka@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35539 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04devicetree: Fix improper use of chip_operationsKyösti Mälkki
Auto-discoverable PCI devices do not require field .enable_dev of chip_operations to be set. They are matched with PCI drivers by the use of PCI vendor and device ID fields. The name given for the chip_operations struct must match the pathname the way it is present in the devicetree.cb files. If there was no match, util/sconfig would currently choose to use the empty weak declaration it creates in static.c file. Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-10-04soc/cavium/common/Makefile: Convert STACK_SIZE value to decimalElyes HAOUAS
STACK_SIZE value needs to be changed from hex to decimal, since -Wstack-usage doesn't recognize hexadecimal numbers anymore. Change-Id: I73606d347194af5de5882a3387a4a5db17f9d94b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04mb/intel/{galileo,wtm2}: Use macro instead of magic numberElyes HAOUAS
Change-Id: Ib8a08e9f854b2b0786c69943d6dbb66abe3ad4d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33438 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
The SPI flash component requirement for Kukui family is 8M so we should update FMAP for that: - Add more comments for alignment and size recommendation. - Enlarge RO to 4M, and RW_SECTION_{A,B} both ~1.5M. - BOOTBLOCK: 32K->128K, aligned with other ARM boards. - Preserve RW_DDR_TRAINING for new calibration. - Reorder the sections for better alignment. - RW_MISC to contain RW sections that should be merged when creating AU image. BUG=b:134624821 TEST=Built Kukui image and boots. dump_fmap -h image-kukui.bin: # name start end size RW_LEGACY 00700000 00800000 00100000 RW_SHARED 006f7000 00700000 00009000 RW_UNUSED 006f8000 00700000 00008000 SHARED_DATA 006f7000 006f8000 00001000 RW_SECTION_B 00580000 006f7000 00177000 RW_FWID_B 006f6f00 006f7000 00000100 FW_MAIN_B 00582000 006f6f00 00174f00 VBLOCK_B 00580000 00582000 00002000 RW_MISC 00577000 00580000 00009000 RW_ELOG 0057f000 00580000 00001000 RW_DDR_TRAINING 0057d000 0057f000 00002000 RW_NVRAM 0057b000 0057d000 00002000 RW_VPD 00577000 0057b000 00004000 RW_SECTION_A 00400000 00577000 00177000 RW_FWID_A 00576f00 00577000 00000100 FW_MAIN_A 00402000 00576f00 00174f00 VBLOCK_A 00400000 00402000 00002000 WP_RO 00000000 00400000 00400000 RO_VPD 003f8000 00400000 00008000 RO_SECTION 00000000 003f8000 003f8000 RO_FRID 003f7f00 003f8000 00000100 GBB 003f5000 003f7f00 00002f00 COREBOOT 00021000 003f5000 003d4000 FMAP 00020000 00021000 00001000 BOOTBLOCK 00000000 00020000 00020000 Change-Id: Id342d57dc95c6197d05b8a265742a2866c35ae09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-04mb/facebook/fbg1701: Remove ONBOARD_MICRON_MEMFrans Hendriks
ONBOARD_MICRON_MEM and ONBOARD_SAMSUNG_MEM are available. These are used to determine if Samsung or Micron onboard memory is assembled. This can not detected run-time. Choice is replaced by one config. Only oldest HW revision contains Samsung module, so set CONFIG_ONBOARD_SAMSUNG memory to default No. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: Id65e92bd4b8d4fe3a6b87dec9bf77e3a62e1be96 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04mb/supermicro/x11-lga1151-series: rework documentationMichael Niewöhner
This splits the x11-lga1151-series' documentation into a generic and a board specific section as a preparation for CB:35427. Additionally this adds some more information on the x11ssh board. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04device/pci_device.c: Use verified boot to check opromFrans Hendriks
Before oprom is executed, no check is performed if rom passes verification. Add call to verified_boot_should_run_oprom() to verify the oprom. verified_boot_should_run_oprom() expects and rom address as input pointer. *rom is added as input parameter to should_run_oprom() which must be parsed to verified_boot_should_run_oprom().. BUG=N/A TEST=Created verified binary and verify logging on Facebook FBG1701 Change-Id: Iec5092e85d34940ea3a3bb1192ea49f3bc3e5b27 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04soc/skl/vr_config: fix KBL-U GT3 detection bugMaxim Polyakov
Some VR parameter values for KBL-U with GT3 graphics are different from values for other CPUs in this series [1]. However, GT3 iGPU will never be detected, since the igd_id variable is compared with the LPC device PCI ID. The patch fixes this bug. [1] page 109, 7th Generation Intel(R) Processor Families for U/Y Platforms and 8th Generation Intel(R) Processor Family for U Quad Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019. Document Number: 334661-006 Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04soc/skl/vr_config: fix GT Loadline for KBL-U/GT3Maxim Polyakov
According to the documentation[1], the Loadline in the unslased GT VR domain should be 2 mOhms for KBL-U (2 Core, GT3 + OPC). [1] page 109, 7th Generation Intel(R) Processor Families for U/Y Platforms and 8th Generation Intel(R) Processor Family for U Quad Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019. Document Number: 334661-006 Change-Id: I433036e76d456a725ab27cf57c9bc2fe01a7ace1 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35781 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04src/pci_ids: add missing Intel Kaby Lake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and updates the platform report for these devices. These changes are in accordance with the documentation: [*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM) Processors, and Pentium(TM) Processors based on the "Kaby Lake" Platform. Programmer's Reference Manual. Volume 4: Configurations. January 2017, Revision 1.0 Doc Ref # IHD-OS-KBL-Vol 4-1.17 [*] Linux kernel sources: include/drm/i915_pciids.h Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04src/pci_ids: add missing Intel Skylake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Skylake processors These changes are in accordance with the documentation: [*] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM) Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference Manual. Volume 4: Configurations. May 2016, Revision 1.0 Doc Ref # IHD-OS-SKL-Vol 4-05.16 Change-Id: I0ba6e58ec3916dceea00519ac5a51503573e8935 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35493 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04soc/skl/vr_config: set Iccmax_gt depends on CPU/GTMaxim Polyakov
According to the DC Current Specifications [1], the current limit for the graphical VR domain (Iccmax_gt) isn't same for different Kaby Lake S CPUs. This value should depend on the iGPU model and processor TDP: +---------------------+-----+------------+ | Segment | TDP | Icc_max GT | +---------------------+-----+------------+ | Dual Core GT2/GT1 | 35W | | | Dual Core GT2 | 51W | 48 A | | Dual Core GT1 | 54W | | +---------------------+-----+------------+ | Quad Core GT2 | 35W | 35 A | +---------------------+-----+------------+ | Quad Core GT2 | 65W | 45 A | | Quad Core GT2 K-SKU | 91W | | +---------------------+-----+------------+ This patch adds the remaining Iccmax_gt current limit values from the documentation [1]. [1] 7th Generation Intel(R) Processor Families for S Platforms and Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1, December 2018, Document Number: 335195-003 Change-Id: I19766e4f8fab6b48565b65ed4cf13efbc213e654 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04mb/facebook/fbg1701: Add measured boot supportFrans Hendriks
No support is available in mainboard. Add support to mainboard: - Add mb_log_list[] - Add routine mb_crtm() BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 Change-Id: I5120ffb6af0b41520056e1773f63b7b2f34a2460 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-10-04mb/facebook/fbg1701: Add verified boot tablesFrans Hendriks
The vendorcode for verified boot is uploaded, but not used by a mainboard. Add support to the mainboard for verified boot. The items to be verifed are placed in board_verified_boot.c BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 rev 0-2 Change-Id: I3ea0a95287977df0dea13e05acedd5406538a6ee Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33463 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04vendorcode/eltan/security/verified_boot: Add verified boot supportFrans Hendriks
Create verified boot support, which includes verifiication of bootblock. This feature use the vendorcode/eltan/security/lib. cbfs_locator is used to init the verified boot support. vendor_secure_prepare() and vendor_secure_locate() are used to preform the required action in each stage. The next lists will be used for verification: * bootblock_verify_list * postcar_verify_list * romstage_verify_list * ramstage_verify_list BUG=N/A TEST=Created binary and verify logging on Facebook FBG-1701 Change-Id: If6c1423b0b4a309cefb7fe7a29d5100ba289e0b4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04vendorcode/eltan/security/mboot: Add measured boot supportFrans Hendriks
Create measured boot. This feature uses the vendorcode/eltan/security/lib. Measure boot can work with and without Verified boot enabled. The function mb_measure() is starting point for the support. This function will be called by the common Verified boot code. BUG=N/A TEST=Created binary and verify logging on Facebook FBG-1701 Change-Id: I7f880a17e240515dd42d57383b5ddddf576985b0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-04arch/x86/acpi: Add SSDT for QEMUPatrick Rudolph
Add a SSDT on qemu and place BOOT0000 inside it to allow testing the google firmware kernel module in qemu. Tested on Qemu Q35. Change-Id: Ibd1b2c2f4fc3db9ae8f338b0d53b2d00ea2c4190 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HIMANSHU SAHDEV <sahdev.himan@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-10-03Update arm-trusted-firmware submodule to upstream masterPatrick Georgi
Updating from commit id 42cdeb93: 2019-09-13 12:09:21 +0000 - (Merge "stm32mp1: manage CONSOLE_FLAG_TRANSLATE_CRLF and cleanup driver" into integration) to commit id ace23683: 2019-09-27 09:54:27 +0000 - (Merge changes from topic "ld/stm32-authentication" into integration) This brings in 83 new commits. Change-Id: I273b5014db76d307d8735d78a8fdd5db3d07146c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-03cpu/intel/: Fix regression with smmrelocateKyösti Mälkki
Fix regression with commit d53fd70 intel/smm/gen1: Use smm_subregion(). The bitmask on SMRR register parameter was inverted for selected models. Change-Id: Ia572ca3bdd4da371985691b5d249f998382fbe48 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-03ec/google/chromec: Default EC_GOOGLE_CHROMEEC_LPC to disabledMartin Roth
Don't set a default bus type for the Chrome EC on x86. The platform must select the bus, typically LPC or ESPI. BUG=b:140055300 TEST=Build tested only Change-Id: I736cb9e43292a1b228cd083ca81a8e5db383e878 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-03southbridge/intel: Add config option to validate firmware descriptorMathew King
Add new config option to validate the Intel firmware descriptor against the fmap layout. This will prevent a firmware descriptor from being used that could corrupt regions of the bootimage in certian circumstances. BUG=chromium:992215 TEST=Build firmware image with mismached decriptor and fmp Without VALIDATE_INTEL_DESCRIPTOR set firmware builds With VALIDATE_INTEL_DESCRIPTOR set error is shown with mismached regions Change-Id: I9e8bb20485e96026cd594cf4e9d6b11b2bf20e1f Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03ifdtool: Add validate option to ifdtoolMathew King
Add an option to ifdtool which validates that the flash regions defined in the descriptor match the coresponding areas in the FMAP. BUG=chromium:992215 TEST=Ran 'ifdtool -t' with a good bios image and verify no issues run 'ifdtool -t' with a bad bios image and verify expected issues Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: Idebf105dee1b8f829d54bd65c82867af7aa4aded Reviewed-on: https://review.coreboot.org/c/coreboot/+/34802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03libpayload: refactor fetching cbmem pointersPatrick Georgi
There's a recurring pattern of reading cbtable entries that point into cbmem entries. Move that pattern into its own function. Coccinelle patch used for this: @@ identifier T, T2; expression TARGET; @@ -struct cb_cbmem_tab *const T2 = (struct cb_cbmem_tab *)T; -TARGET = phys_to_virt(T2->cbmem_tab); +TARGET = get_cbmem_ptr(T); Change-Id: I7bd4a7ad8baeeaebf0fa7d4b4de6dbc719bc781f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03sb/intel/i82801gx: Use symbolic name for register, code reworkPetr Cvek
An original code had a wrong register address 0x27 for AHCI BAR. The value was aligned incidentally by the code specific of the pci_read_config32 function to the correct address 0x24. All 0x24 values in sata.c were changed to the symbolic name PCI_BASE_ADDRESS_5 and the code was optimized. An equivalent code was tested on a real hardware. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Change-Id: I33509befe86ff6e333c559c87a0f45886d737df9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35737 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03mb/facebook/fbg1701/devicetree.cb: Use 64MB framebuffer sizeFrans Hendriks
Connected 4K monitor is not configured at max resolution. The framebuffer size is too small. Increase the framebuffer size to 64MB. This is sufficient for max configuration of 1 HDMI monitor combined with internal LCD panel. BUG=N/A TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701 Change-Id: I25d2cd696830fc5bda84ea2b87538f526373998e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-03soc/intel/braswell/chip.h: Add IGD_MEMSIZE_xxMBFrans Hendriks
Add defines to have some more readable code for devcietree.cb. BUG=N/A TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701 Change-Id: Ifc1a7657a528d1fc570dd16df66b078e37e014cb Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-03mb/facebook/fbg1701: Add mainboard_read_pcb_version()Frans Hendriks
PCB version is determined using inb() in actual code. Create function mainboard_read_pcb_version to read pcb version. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: I7c16627f468d84ca4ad2aab8bf9fb555f50dc23c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-03Update chromeec submodule to upstream masterPatrick Georgi
Updating from commit id 860fe2962: 2018-12-29 05:45:29 -0800 - (mt_scp/ipi: Support host command.) to commit id a1afae4e0: 2019-10-02 11:47:45 +0000 - (juniper: initial setup) This brings in 1723 new commits. Change-Id: Ieb4f00b21a4354bb634c3427c73260123b54ac2a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03Update opensbi submodule to upstream masterPatrick Georgi
Updating from commit id ce228ee: 2019-07-02 11:11:08 +0530 - (include: Bump-up version to 0.4) to commit id e561c63: 2019-10-02 17:03:58 +0530 - (lib: Fix coldboot race condition observed on emulators/simulators) This brings in 44 new commits. Change-Id: Ide6e3c2bb98e79750b40a9b8ca9f2f1d2c123628 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03Update vboot submodule to upstream masterPatrick Georgi
Updating from commit id e6700f4c: 2019-08-13 04:36:52 +0000 - (vboot: update vboot2 functions to use new vb2_error_t) to commit id b2c8984d: 2019-10-01 06:01:59 +0000 - (vboot: fix compile error with MOCK_TPM) This brings in 71 new commits. Change-Id: Id7cefa3ad5b30c955d18e469494fec32f6f58a48 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03intel/fsp_baytrail: Drop some PCI scratchpad register definitionsKyösti Mälkki
These were unused and somewhat cryptic, assumed purpose was to store pre-CBMEM timestamps in various PCI config space locations. Change-Id: I074294446501d49a9bd3c823a2a794c33f443168 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35731 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03util/release: add gerrit stats scriptMartin Roth
This tool downloads, caches and analyzes commits pushed to gerrit for a specified range of commits. Currently it only works over SSH. Data that is printed about the range of commits: CSV Data about each individual commit: - Commit ID - Commit Date - Author - Commiter - Submitter - Lines added - Lines removed - Title - Reviewers It then prints the analysis it did on the data: - Total Commits - Total lines added - Total lines removed - Total difference - Authors - Number of commits - Total Authors - Authors - Lines added - Authors - Lines removed - Reviewers - Number of patches reviewed - Submitters - Number of patches submitted The script relies on a number of perl modules which must be installed separately. Change-Id: I74896a97b5fe370c0b08562ac85d29435e438a31 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/14225 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-03buildgcc: Run aclocal before configureStefan Reinauer
Ubuntu 19.04 will fail looking for aclocal-1.15 if the scripts are not regenerated because 19.04 ships with 1.16. There are not enough eyes to roll when working with GNU autotools. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4aa9f520499930ffc984ab0b0144c9c6b2e544a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03util/crossgcc: Add patch for __alloca missing on ubuntu 18.04Martin Roth
Bring this over from the HEADS repo. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I36dc9860f4c4a2675fd3fa24fa3e534215ceb43e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-02intel/quark: Drop xx_DEV_FUNCKyösti Mälkki
Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: Ice1062d10b793dcbeb5b2ce9e2788fd3b6b6250b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02intel/skylake: Refactor IRQ assignmentsKyösti Mälkki
When creating the IRQ routing, referenced device and function number are always of the same PCI device. Change-Id: Ifc4795245187f8d70650242a56e6ce771ef2167a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35735 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02intel/pci_devs: Regroup PCI xx_DEVID entriesKyösti Mälkki
Change-Id: I953e9a7746232b4c40deca55eb6cb3bd7af91496 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02libpayload: Add fmap_cache to sysinfo_tFurquan Shaikh
Now that FMAP is cached in CBMEM and its pointer is added to coreboot table for quick lookup, this change adds a new member "fmap_cache" to sysinfo_t that can be used by payloads to get to FMAP cache. BUG=b:141723751 Change-Id: If894c20c2de89a9d8564561bc7780c86f3f4135a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02mb/google/drallion: Disable GBE in firmware for drallion variantsThejaswani Putta
BUG: None TEST: Build successful, checked the CBMEM log if 1f.6 is disabled with this patch Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Change-Id: I4e74b259ce8f5f70833dce94692dcbe33e8504db Reviewed-on: https://review.coreboot.org/c/coreboot/+/35509 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02intel/baytrail: Replace config_of(dev) with config_of_soc()Kyösti Mälkki
The function does not otherwise need dev. Change-Id: I75d3283b537151258ed48f7e4e0991dff53a803c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35670 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02coreinfo/coreinfo.c: Support both lower and upper case alphabetsHimanshu Sahdev
Modify handle_category_key to handle both upper and lower case alphabets in the coreinfo payload. Change-Id: I3ccbf69e90ba7824ad6ec85d2ca59aa8f40b3006 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-02mb/google/drallion: Dynamicly disable memory channelEric Lai
Disable memory channel by HW strap pin. Using for factory debug. BUG=b:139773082 BRANCH=N/A TEST=Rework HW strap pin and check /proc/mem_info Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic5f53f0ba3bd432fbcb7513d2a8aa49d42f7a23e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
Two fields of struct sdram_params are renamed for future CL of DRAM full calibration. Field 'impedance' is also removed. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02sb/intel/common/smihandler: Hook up smmstoreArthur Heymans
TESTED on Asus P5QC. Change-Id: I20b87f3dcb898656ad31478820dd5153e4053cb2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30012 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-10-01Documentation/mainboard/amd: Add padmelon documentation and imagesRichard Spiegel
Create documentation on padmelon, including how to program the SPI. Also include an index.md pointing to the documentation, as currently there's no maiboard documentation folder for AMD. BUG=none. TEST=none. Change-Id: I1a684c1acd3fb9441df71e2bc0fffa6131148b98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-01Documentation/soc/amd: Add Family 15hRichard Spiegel
Create documentation for AMD Family 15h. BUG=none. TEST=none. Change-Id: Iaab4edc431329a691283121494595f3797c566c6 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-10-01mediatek/mt8183: Allow modifying vcore voltageHsin-Hsiung Wang
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be calibrated with different vcore voltages to get correct parameters. A new API is added to allow changing vcore voltage. BUG=b:80501386 BRANCH=none TEST=measure vcore voltage with multimeter Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-01cpu/intel/common: Move intel_ht_sibling() to common folderPatrick Rudolph
Make intel_ht_sibling() available on all platforms. Will be used in MP init to only write "Core" MSRs from one thread on HyperThreading enabled platforms, to prevent race conditions and resulting #GP if MSRs are written twice or are already locked. Change-Id: I5d000b34ba4c6536dc866fbaf106b78e905e3e35 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-01mb/kontron/986lcd-m: Add gameport base allocation workaroundPetr Cvek
A missing definition of gameport base (PNP io 0x60) will cause an automatic address assignment during PCI/PNP enumeration, which won't obey limit 0x7ff. This will cause the enumeration to fail as other devices already have the values enabled. The symptoms are: not working USB, PS/2, garbled UART console, not working PCIe GPUs and crashes. Probably because of wrongly assigned IO ports. Example of log (shortened): Done reading resources. Setting resources... !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.0 1c * [0x0 - 0xfff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.1 1c * [0x1000 - 0x1fff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.2 1c * [0x2000 - 0x2fff] io !! Resource didn't fit !! aligned base 400 size 10 limit 2e7 40f needs to be <= 2e7 (limit) PCI: 00:1f.2 20 * [0x3080 - 0x308f] io !! Resource didn't fit !! ... ERROR: PCI: 00:02.0 14 io size: 0x0000000008 not assigned ... ERROR: PCI: 00:1f.2 10 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 14 io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 18 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 1c io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 20 io size: 0x0000000010 not assigned ... PCI: 00:1b.0 subsystem <- 8086/27d8 PCI: 00:1b.0 cmd <- 102 PCI: 00:1c.0 bridge ctrl <- 0003 PCI: 00:1c.0 subsystem <- 8086/27d0 PCI: 00:1c.0 cmd <- 107 PCI: 00:1c.1 brids70c01mcu0PeC: 0 dV0i8s0immicrocode: upd10a00000y0025 x666600CPU physiaB 0 0 e k MTRR cheaeu60zeAttemfWaiting for 1st Sot AP: slot 1 apic_L0ecl0zsax a aInitiNntt kac:oIG0 Ua dUrSGSGL Ct0C07fintel_vga_int15_h VGA Option ROM wa7..Azalia0Azalia: codkAbCiPCI: 00:1c.0 init finished We can see the ports probably started to collide after the activation of 00:1c.0 device. A debug run with compiled SPEW shows the problem with enumeration: PCI: 00:1f.1 18 * [0x50b8 - 0x50bf] io PCI: 00:1f.2 10 * [0x50c0 - 0x50c7] io PCI: 00:1f.2 18 * [0x50c8 - 0x50cf] io PCI: 00:1f.1 14 * [0x50d0 - 0x50d3] io PCI: 00:1f.1 1c * [0x50d4 - 0x50d7] io PCI: 00:1f.2 14 * [0x50d8 - 0x50db] io PCI: 00:1f.2 1c * [0x50dc - 0x50df] io PNP: 002e.7 60 * [0x50e0 - 0x50e0] io <-- gameport base DOMAIN: 0000 io: base: 50e1 size: 40e1 align: 12 gran: 0 limit: 7ff done Notice a weird base for DOMAIN, along with the limit. Adding a definition of gameport (0x220) as a workaround fixes the problems. The gameport should be still disabled thanks to disable bits (W83627THF datasheet is little bit chaotic). I didn't find any info if the gameport is available on some pads of the motherboard. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Change-Id: Ie8e42552ac5e638e91e5c290655edcce1f64e408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-01intel/i945: Define peg_plugin for potential add-on PCIe cardKyösti Mälkki
Change-Id: I06f6a7ed7a1ce935d154b8c7b11dcb81608329b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-01intel/i945: Delay bridge VGA IO enable to ramstageKyösti Mälkki
Change-Id: Ifc54ecc96b6d9d79d5a16b2d7baeae70b59275c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-01intel/i945: Define p2peg for PCIe x16 slotKyösti Mälkki
Change-Id: I0e9dd06376c1076be4a4c41ff87dfd3cf820d7bc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-01intel/pci: Utilise pci_def.h for PCI_BRIDGE_CONTROLKyösti Mälkki
This is a PCI standard register, no need to alias its definitions under different names. Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30sb/intel/bd8x62x,i82801gx: Fix PCI bridge subsystem IDsKyösti Mälkki
Implementation of ich_pci_dev_enable_resources() used to have a custom implementation to program PCI subsystem IDs for the (legacy) PCI bus bridge. With the local implementation removed, we no longer need the custom .enable_resources callback. Change-Id: I6f73fd0e4d5a1829d1555455c9a143f1d18a6116 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Petr Cvek <petrcvekcz@gmail.com>
2019-09-30device/pci_early: Drop some __SIMPLE_DEVICE__ useKyösti Mälkki
The simple PCI config accessors are always available under names pci_s_[read|write]_configX. We have some use for PCI bridge configurations and resets in romstages, so expose them. Change-Id: Ia97a4e1f1b4c80b3dae800d80615bdc118414ed3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30sb/intel/spi: Use different SPIOPS for most SST flashesArthur Heymans
Many supported SST flashes use the AAI OP (0xad) to write. TESTED on Thinkpad X60 with SST25VF016B, flashrom can use AAI_WRITE op with locked down SPIOPS. Change-Id: Ica72eda04a8d9f4e563987871b1640565c6e7e12 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-30sb/intel/bd82x6x: Use common final SPI OPs setupArthur Heymans
This also reworks the interface to override OPs from the devicetree to match the interface in sb/intel/common/spi. Change-Id: I534e989279d771ec4c0249af325bc3b30a661145 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-30mb/google/drallion: Clean up devicetree configAamir Bohra
* Disable SATA controller and related configs. * Disable PCIe root ports 10 and related configs. -> Board uses integrated CnVi for WLAN * Disable PCIe root ports 12 and related configs. -> Board uses WWAN intarfaced over USB Change-Id: If9d49cef290dcccb114afccc3ac34cd072802ea4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35723 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/google/drallion: Configure LPSS controller parametersAamir Bohra
drallion uses below LPSS controllers: I2C: 0/1/4 GSPI: None UART: 0(Console) BUG=b:141575294 Change-Id: I9c57f8054f5da5add667168502ebc3e089c440f8 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-09-30arch/x86: Fix __ROMCC__ automatic prerequisitiesKyösti Mälkki
While the list of prerequisities is not created with romcc, we need to simulate it since different set of header files will is used. Change-Id: Ib799c872b5280e2035126f9660e04e51acc4b1a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35601 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30soc/intel/fsp_broadwell_de: Enable SSE and SSE2Kyösti Mälkki
Apparently romcc-bootblock just barely built without XMM registers. Change-Id: Ie7b1101f47c2dfb718bef99f8c05f9d575c821cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-30drivers/i2c/lm96000: Add more settings for fan controlNico Huber
Allow to set a lower temperature limit, as the currently hard-coded 25C may be to low for a given temperature sensor. Also enable smoo- thing, currently hard-coded to the maximum interval of 35s, and set the hysteresis value. Change-Id: I5fde1cf909e8fbbaf8a345790b00c58a73c19ef8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30drivers/i2c/lm96000: Fix integer sign issueNico Huber
We accidentally converted an `int` return value to an `unsigned`, making it impossible to check for errors with `< 0`. Fix that by using an `int` variable. Change-Id: I5433c27e334bc177913e138df83118b128c674b7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30ec/kontron/kempld: Add fall-through comments where appropriateNico Huber
Fixes related GCC warnings. Change-Id: I803fc0e005390ebd8a5e3ac6886ee968c56c3a34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30drivers/i2c/at24rf08c: Add proper Kconfig optionNico Huber
The existing Kconfig code made SMBIOS_PROVIDED_BY_MOBO depend on VENDOR_LENOVO. Thus, it couldn't be selected by boards from other vendors. So we add another Kconfig that selects it here. NB. It's still unclear how the two drivers in this directory are related (at24rf08c and lenovo_serial). From the code, it doesn't look like the latter belongs here. Change-Id: Iaa5c5a584f2a5e2426352ec6aa681f99a55efa49 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30device/i2c_bus: Add i2c_dev_read_at16()Nico Huber
i2c_dev_read_at16() sends a 16-bit offset to the I2C chip (for larger EEPROM parts), then reads bytes up to a given length into a buffer. Change-Id: I7516f3e5d9aca362c2b340aa5627d91510c09412 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-30pci_ids: fix PCI ID for Intel Iris HALO GT4 iGPUMaxim Polyakov
According to the documentation [1], SKL-H Halo GT4E (Iris Pro Graphics P580) PCI ID should be 0x193B. [1] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM) Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference Manual. Volume 4: Configurations. May 2016, Revision 1.0 Doc Ref # IHD-OS-SKL-Vol 4-05.16 Change-Id: Id62fe3ec26779d51b748efd271db565ade1e3ee0 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-30pci_ids: rename PCI_DEVICE_ID_INTEL_SKL_ID_HMaxim Polyakov
The new macro name contains the number of cores: PCI_DEVICE_ID_INTEL_SKL_ID_H_4 - 4 core PCI_DEVICE_ID_INTEL_SKL_ID_H_2 - 2 core Change-Id: I190181b213d55865aa577ae5baff179fef95afde Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35302 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30util/mb/google/hatch: update CRC calculation for correctnessPaul Fagerburg
The CRC result is treated as a signed value, and so in certain situations, the calculated value for the last four digits will not be correct. Ensure that the CRC is treated as an unsigned 32-bit value prior to converting the last 4 decimal digits to a string. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I92f9ce1ceb7450f90b89c94e0ace6f79a9419b42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35604 Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30util/mb/google/hatch: script can take optional bug parameterPaul Fagerburg
When creating a new variant, adding a bug parameter after the name of the variant will populate the BUG= field in the commit message. If the parameter is not present, then BUG=None. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I3e08df5d80a5684c9f3675e3c0a8346240171cd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-30util/mb/google/hatch: fix style issues in shell scriptPaul Fagerburg
* Use all caps for variables. * Use a single exit code for failures. * No need to popd before exiting the script. * Do ${var,,} and ${var^^} into variables instead of using it everywhere. * Add more punctuation in comments. * Specify LC_ALL=C so that upper/lower case show the desired behavior. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I63aa0aa633f36b9543e809fc42fac955da5960a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
To support mt8183 power saving during suspend to RAM, this patch loads SPM firmware to support SPM suspend. SPM needs its own firmware to do these power saving in the right timing under correct conditions. After linux PM suspends, SPM is able to turn off power for the last CPU and do more power saving for the SoC such as DRAM self-refresh mode and turning off 26M crystal. BUG=none BRANCH=none TEST=suspend/resume passes for LPDDR4 3200 Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-30soc/intel/skylake: Fix ACPI exception AE_NOT_FOUNDPatrick Rudolph
Make sure to match devices on the root bus only. This fixes an issue where the SoC returned "MCHC" as ACPI name for devices behind bridge devices, as the DEVFN matched. Fixes observed "ACPI exception: AE_NOT_FOUND" in dmesg, as the ACPI path no longer contains invalid names. Tested on Supermicro X11SSH-TF. Change-Id: I6eca37a1792287502a46a90144f2f0d8e12ae5d4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30mb/supermicro/x11-lga1151-series: x11ssh-tf: remove unneeded ACPI ifdefMichael Niewöhner
This removes the "ifdef ACPI" which is not needed here as we currently don't include gpio.h in any asl file. Change-Id: I803bbee5933eda9423a9bc9fcaea9e905e3ac78e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35543 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>