summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-14util/cbmem: Scale time stamp values correctlyAaron Durbin
Commit c49014e (timestamp: add tick frequency to exported table) refactors the code, but forgets to correctly scale the frequency to megahertz, where the value is read from sysfs, so that printing time stamp information shows milliseconds instead of microseconds, as can be seen on the output `cbmem -t` for the ASRock E350M1 below. ``` 0:1st timestamp 515 10:start of ramstage 515 (0) 30:device enumeration 515 (0) 40:device configuration 610 (94) 50:device enable 614 (4) 60:device initialization 624 (9) 70:device setup done 639 (14) 75:cbmem post 844 (205) 80:write tables 844 (0) 90:load payload 849 (4) 15:starting LZMA decompress (ignore for x86) 849 (0) 16:finished LZMA decompress (ignore for x86) 869 (20) 99:selfboot jump 869 (0) Total Time: 350 ``` So scale the return value correctly to megahertz, by dividing it with 1000. ``` 0:1st timestamp 515,655 10:start of ramstage 515,655 (0) 30:device enumeration 515,663 (7) 40:device configuration 610,620 (94,957) 50:device enable 614,680 (4,059) 60:device initialization 624,618 (9,938) 70:device setup done 639,553 (14,934) 75:cbmem post 844,707 (205,154) 80:write tables 844,710 (2) 90:load payload 849,532 (4,821) 15:starting LZMA decompress (ignore for x86) 849,655 (123) 16:finished LZMA decompress (ignore for x86) 869,903 (20,247) 99:selfboot jump 869,922 (19) Total Time: 354,261 ``` Change-Id: Iea032c62487c7946b6194a90268755034c6350df Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14086 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-03-14vendorcode/intel/fsp1_0: Add Broadwell-DE SoC vendor codeYork Yang
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based project and is based on Broadwell-DE Gold release. Change has been verified on Intel Camelback Mountain CRB. Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/14030 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp_baytrail: Enable LPSS in ACPI modeBen Gardner
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would result in unusable devices, as the resources were set to 0 and the devices were disabled. lpss.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode set to disable and the devicetree set to default. Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp1.1: Mark graphics init done after SiliconInit phaseDuncan Laurie
If the VBT was provided to the FSP GOP driver then graphics init will be done as part of SiliconInit step and we can mark that when it is completed. This will result in the "oprom" flag being set properly in the coreboot gpio table and the netboot firmware will have video. [pg: avoided conflict with Quark that comes without silicon_init_params.GraphicsConfigPtr] BUG=chrome-os-partner:50864 BRANCH=glados TEST=boot image.net.bin on chell and get working graphics without being setuck in a reboot loop thinking graphics needs to be started when it already has been. Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331301 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240) Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5 Original-Reviewed-on: https://chromium-review.googlesource.com/331355 Reviewed-on: https://review.coreboot.org/13986 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13coreinfo: Remove the LAR moduleJonathan Neuschäfer
Since libpayload's LAR support was dropped in If6e36569cd, this module doesn't compile anymore. Change-Id: I98f25613a1728e94704d9e9ccb65fd6ba33968b9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14037 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13util/ifdtool: add option to change chip densityJan Tatje
Adds -D / --density option to change the chip density. This is only implemented for IFD version 1 as I do not have an IFD version 2 to test this. Density of both chips is changed by default, but a chip can be selected using -C / --chip. Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/14032 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Fix LPE initialization and enable ACPI modeBen Gardner
This change properly assigns resources to the LPE (Low Power Engine for Audio) and enables ACPI mode. lpe.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Don't clear gnvs in acpi_init_gnvs()Ben Gardner
That wipes out all previously stored settings and breaks running devices in ACPI mode. This more closely matches what is done in intel/baytrail. Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13abuild: Add option of starting with an existing defconfig fileMartin Roth
We want to start testing builds with additional Kconfig options to try to get more coverage. This will allow us to enable various options to test without having to add each individual option to the abuild script. Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12northbridge/intel/i82830: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i830 boards in the chipset. Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12payloads/seabios: Add "git revision" to the SeaBIOS version menuAntonello Dettori
Add an option to specify a git revision from which to build SeaBIOS. Change-Id: Ifbf3b82e784f79395ab7cd07c5804f72928d7640 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13937 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins)
2016-03-12intel/skylake: Do not log wake source on resetDuncan Laurie
Skip logging a wake source when just resetting without coming from S3 or S5 state. This will prevent the occasional spurious event like PCI PME from showing up in the event log. BUG=chrome-os-partner:40635 BRANCH=glados TEST=run warm reboot teset on chell and ensure no wake source is logged Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890 Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329846 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331173 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13991 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to statically clock gate 8254 timerAaron Durbin
In order to save more power by shutting down clocks add the ability to optionally clock gate the 8254 programmable interrupt timer. When doing this the platforms lose their "PC"-ness which certain payloads and OSes rely on such as SeaBIOS. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Enabled option on chell. Noted the bit is set upon booting. Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477 Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331171 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12glados/chell: send an extra VR mailbox commandRizwan Qureshi
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode has been updated since v76, and it requires an an extra VR mailbox command should be sent from coreboot to pcode. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low CQ-DEPEND=CL:329393 Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2 Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1 Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329480 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12vendorcode/intel/fsp/fsp1_1/skylake: update FspUpdVpd.h 1.9.0Aaron Durbin
The previous copy of FspUpdVpd.h was not up to date w.r.t. the FSP release being used for skylake boards. Fix that. BUG=chrome-os-partner:50863 BRANCH=None TEST=Built and booted on chell. Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7 Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331290 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13984 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12mediatek/mt8173: memlayout: Create DRAM DMA region for NOR flash DMA read.Yidi Lin
NOR flash has a hardware limitation that it can't access SRAM region after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000 for NOR flash driver. So that the NOR flash driver can use this region after 4GB mode is enabled. BRANCH=none BUG=chormoe-os-partner:49229 TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram. And check /proc/meminfo. Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327962 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331177 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: detect sdram size at runtimeYidi Lin
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect the DRAM size at runtime. BUG=chrome-os-partner:49427 BRANCH=none TEST=Boot to kernel Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223 Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327961 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331176 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: mmu: update mmu range before DRAM is initialized.Yidi Lin
The DRAM size can not be determined before DRAM is initialized. Since mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of 2GB DRAM address before DRAM is initialized. BRANCH=none BUG=none TEST=boot to kernel Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327960 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331175 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12Add a driver for the parade ps8640Jitao Shi
BRANCH=none BUG=none TEST=none Change-Id: Icf397ce2ffdaed5048367daf2086c067984fea0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b5a88793ccfc46af196300791a300be67b70f5b1 Original-Change-Id: I75adf2688c9c8b9a2338f7dee5d0ac10e7181529 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321056 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: pll: raising the CPU core frequencyYidi Lin
Runs the LITTLE core at highest freqency to speed up the boot time. Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.) BRANCH=none BUG=chrome-os-partner:47422 TEST=flash the bootloader and measure the boottime by cbmem result Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161 Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324685 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: add NOR DMA readBayi Cheng
BRANCH=none BUG=none TEST=boot oak to kernel on rev2 Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323932 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13979 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12device/i2c: Add i2c_read_bytes() APIJitao Shi
Add multi-bytes read support. BRANCH=none BUG=none TEST=saw edid log and dev screen Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306 Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/325211 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13978 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure USB OC pinsYidi Lin
BRANCH=none BUG=none TEST=none Change-Id: If7244d0050833c676de72106d1c8473dd8f290a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89356785e66eb6d5b52fdf09933d2d28d9f67a90 Original-Change-Id: I94dda9834da6553795e7f3f65ff267fdcb6b7d47 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321055 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13977 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config USB Hub for rev5Ben Lok
Reset pin of USB Hub is connected to GPIO118, it is low active. Config GPIO118 as GPO and output high. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321054 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13976 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config audio for rev5Koro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ibdafa4ffe0baf5231654e67612b7ca59d835b602 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63fedfec26ba1444934e348ce59609fa88e12de5 Original-Change-Id: Ifbbf8d2b3b6e163481843308c2e3edc4a55f90c6 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319988 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Remove obsolete Rev0 settingKoro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I65aa87e88cf812fdb490933de1a3b121866a2694 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f703f7e71ae6ffc0f1ac0e70486d087a28da5ba Original-Change-Id: I8d794464d45ea69f9a46f7ebc505f6ec2127f204 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319987 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13974 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Enable TP_SHIFT_EN for the revisons before 5 onlyYidi Lin
BRANCH=none BUG=none TEST=emerge coreboot Change-Id: Ic46490a56a6a8146b91a055b9ce5d5bb23bc7a49 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 082ce1848bf37bba369fd0dccc4cf3fc83a8a018 Original-Change-Id: I58f009d2fc03cf5a52b4dbd042a92973cde4d035 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320029 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13973 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: da9212 gpio configuration for rev5henryc.chen
BRANCH=none BUG=none TEST=none Change-Id: Ib44a9e8ca94727809e47831228f4742c25a53977 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: da9185c22264440da822aa252c0c5d2aef78b455 Original-Change-Id: I98c2ad757d0cd0e3234e49392091784b43a106e7 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320028 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13972 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config PANEL_LCD_POWER_EN for rev5Yidi Lin
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ic2019a1d61cbc5949c1f42346b279ef05f725dfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bf13606f01438bc2ea27ecccc6359a7320dc34cc Original-Change-Id: I3fcc403cb7a3429b9673be0e727fc7d8c9d4f556 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320027 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13971 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure SPI_LEVEL_ENABLE pin for rev5Yidi Lin
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320026 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13970 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Update infracfg register mapMilton Chiang
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ifdeb686f7695fbefadc15d47e9b0c49b6b35c37d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2404a31dac8c84580424fc01816669b27ddf8617 Original-Change-Id: I831d34b1bce2675caa3da8da7a214f392e561000 Original-Signed-off-by: Milton Chiang <milton.chiange@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320025 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13969 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: add event logCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. [pg: add the code, but don't actually enable the support yet, because it relies on code that still needs to be merged to arm-trusted-firmware.] BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I9ea3ce6c8f79dd427be67f30bc940d2038173b81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13100 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Provide I2C bus initialization APIjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: I8aa9ca0fce804cc1682947b7e184781dd5d437f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13107 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize DRAMPeter Kao
BUG=none TEST=emerge-oak coreboot BRANCH=none Change-Id: I3ed8bad1bdc7d17e334e0136f92a51c8e7ba4e67 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6 Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292692 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13106 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Add EMI driver, DRAM initializationPeter Kao
BUG=none TEST=emerge-oak coreboot BRANCH=none Change-Id: I6b05898de2d0022e0de7b18f1db3c3e9c06d8135 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6 Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292692 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13105 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: enable RTC in ramstageCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: I77c5a8aa31ab10d82115a60bdfee1da35707619f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mt8173: add SPI NOR supportmtk05962
BRANCH=none BUG=none TEST=boot oak to kernel on rev1 Change-Id: I0773c81398df445aec16bcfcd0c5a8fe5a588b5c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ae15c42c2f7d9c2a716e5b6098d85e17279f5eae Original-Change-Id: I65abf810d35ae5e7156cf6f5730117e690183d18 Original-Signed-off-by: mtk05962 <bayi.cheng@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292693 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11crossgcc/buildgcc: Add missing quotation markJonathan Neuschäfer
Change-Id: I5c20fd7057751a912aa2b2118dc5610c1ef647dc Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14039 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-03-11northbridge/intel: move mrccache.c of sandybridge + haswell to commonAlexander Couzens
The sourcecode is 99% the same. Only two lines differ, but not in functionality. Also rename mrccache.c -> mrc_cache.c Tested-on: boot + suspend/resume on x220 Change-Id: I36f79d066336f223b608c70c847ea6ea6e4ad287 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrc_cache definition into a common headerAlexander Couzens
The mrc_cache definition and the struct mrc_container are the same over all intel platforms. Change-Id: I128a4b5693d27ead709325c597ffe68a0cc78bab Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13998 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11spi/SST: fix write support for SST25VF064CAlexander Couzens
The SST25VF064C doesn't support the auto incrementing write which all other supported SST chips support. Allow the chips to select their write method. Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14000 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-11nortbridge/sandybridge/mrccache: parse the return code of flash->writeAlexander Couzens
Change-Id: I2738da99e4651598faeaa228fba447d0872e9ded Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13999 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Train correct receiver in TrainDQSRdWrPos_D_Fam15Timothy Pearson
Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13932 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Consolidate calls to MCT minimum clock setting fetchTimothy Pearson
Change-Id: I4497b0be6ed6c90dbb31e89013feed8ff5ff9071 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13885 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11codebase: Change makefile $(shell pwd) commands to $(CURDIR)Martin Roth
- Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo: Fix libpayload to not install to libpayload/libpayloadMartin Roth
Libpayload installs into the libpayload/ directory under the directory you point it to. Since we were pointing it to build/libpayload, it was installing to build/libpayload/libpayload. Change-Id: I11029fcfb232d9b66eb3f310fa9e663236d4b213 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13966 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo/nvram: Print correct line numbersJonathan Neuschäfer
With this patch the numbers are the "base" addresses for the lines, which is consistent with the PCI configuration space view. Change-Id: I2c70d976f6f9f9f615d13bc7a634d6f8037e0c7b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14028 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-11coreinfo: Default to first non-empty categoryJonathan Neuschäfer
... instead of the overall first one. Change-Id: If9b2674ff2ef83b7c24a3388316b6f4128bc1007 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14027 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/cbfs: Add some missing file typesJonathan Neuschäfer
An alternative to this patch is to copy the filetypes table from util/cbfstool/cbfs.h and use that. Change-Id: Iebf3a7a8912761ff6825a6f51c8b68df0dcc5990 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo: Show "No modules selected" when appropriateJonathan Neuschäfer
Change-Id: I7222544757587b37e0cf632aa01d042414dde223 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14025 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/cbfs: Don't assume that the free space is at the endJonathan Neuschäfer
On emulation/qemu-i440fx, I get this layout: Name Offset Type Size cbfs master header 0x0 cbfs header 32 fallback/romstage 0x80 stage 14284 fallback/ramstage 0x38c0 stage 42382 fallback/payload 0xdec0 payload 1165052 config 0x12a600 raw 352 revision 0x12a7c0 raw 572 cmos_layout.bin 0x12aa40 cmos_layout 772 fallback/dsdt.aml 0x12ad80 raw 4000 img/coreinfo 0x12bd80 payload 1165052 (empty) 0x2484c0 null 1799192 bootblock 0x3ff900 bootblock 1456 ... which coreinfo displays in the following way, without this patch: cbfs master header fallback/romstage fallback/ramstage fallback/payload config revision cmos_layout.bin fallback/dsdt.aml img/coreinfo <free space> Change-Id: I21eb1dfbe52921843d28683c9396e9b27caa4fbf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/Makefile: change $(obj) to $(coreinfo_obj)Martin Roth
- Rename obj to coreinfo_obj so it doesn't conflict with the obj variable in libpayload. Change-Id: I2ffb06a87e30a5eeff5b0dfc0ba62b5e9ab46e26 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13938 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo: Remove .xcompile when doing a cleanMartin Roth
Change-Id: I3e719e105c4bacd5e02e055d3f00650a1e126656 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13965 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11crossgcc/buildgcc: Update for recent arch additionsMartin Roth
- Add powerpc64le-linux-gnu & nds32le-elf to the instructions as supported architectures - Add nds32le-elf as a supported architecture so it will stop warning when you build it. Change-Id: Ifcdbc3d082eae5b9b5f8828914e7d2b7ed1f13a4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11payloads/external/Makefile.inc: Don't rebuild SeaBIOS every timeMartin Roth
Currently, if SeaBIOS is set as the payload, it gets rebuilt every single time we do a build. Change it to re-build just when there’s a config change. Change-Id: Ib141f2cbf8796d449172432bb30fa4806cf90328 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-11nvramcui: Add distclean targetMartin Roth
This doesn't do anything more than the clean target, but having both clean and distclean targets in all makefiles makes standardizing the cleaning routines easier. Change-Id: I41578de371a8f767ee23266c30e65e928f0985c4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-11SeaBIOS: Update SeaBIOS from repo when using master branchMartin Roth
Previously the SeaBIOS directory would never get updated after the initial clone because the tag would always match. This can be shown by noticing that the text 'Fetching new commits from the SeaBIOS git repo' is never seen. This change will always try to pull the latest code if 'Master' is selected. Change-Id: I460e2fb0c6f683a0f85343d164880c2d9e6d95cc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13947 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11crossgcc/buildgcc: Add comment about URLs and jenkins builderMartin Roth
Add a comment to try to lower possible confusion later if the jenkins tool builder fails to build a new tool. The URLs for the packages that are downloaded are checked against known locations so that someone can't maliciously download a package from somewhere and run it on the build server. This provides a little bit of security, but could confuse someone if they don't realize it. Change-Id: I7858e3d86fc705b480f6792b6adf3d5349580e01 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13955 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11crossgcc/Makefile.inc: Add target for jenkins toolchain test buildMartin Roth
We've recently added a jenkins test builder for the coreboot toolchain. This patch allows what it builds to be controlled from the makefiles checked into git instead of by a rule on the builder itself. Change-Id: I65f70bac5ab97ecb27aae93ee370b26a2ab1f9c0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13954 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11nb/amd/mct_ddr3: Require minumum training quality for both read and writeTimothy Pearson
The existing MCT code proceeded to the next DRAM training phase if the minimum lane quality standard passed for either the read or write direction. Ensure that both pass for a given set of delay values before proceeding to the next training phase. Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13993 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Set read DQS delay to 1UI before calculating read latencyTimothy Pearson
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency must be calculated prior to DQS position training, however the read latency calculations use read DQS delay values that have not been set prior to DQS position training. Set the read DQS delay values to 1UI (i.e worst case) before calculating the read latency prior to DQS position training. Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13995 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Properly initialize arrays and add bounds checksTimothy Pearson
A couple of arrays were not properly initialized. This did not appear to affect operation of the codebase however it led to some ugly values being displayed when debugging was turned on. Also bounds check an array index; as before this did not appear to affect operation but was a potential point of failure. Change-Id: I243b7197a74aed78ddca808eb3b0f35f1fe9d95a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13934 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Restore previous DQS delay values on failed loopTimothy Pearson
Change-Id: Iacfcd7f379d09a633973b4c3ef3cbb97e6d1f09f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13931 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11soc/intel/apollolake: Avoid hardcoding CAR region size for FSPMAndrey Petrov
Instead of having to supply CAR memory region during compilation time it is possible to determine it in runtime. FSP2.0 blobs carry a copy of UPD structure pre-populated with 'default' values. The default value for StackSize is actually the real value blob needs. Change-Id: I298e07bb12470ce659f63846ab096189138e594f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14001 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-11payloads/seabios: Update version number in KconfigPaul Menzel
Fix up commit 4f66648c (payloads/seabios: Upgrade stable from 1.9.0 to 1.9.1), forgetting to update the version number displayed in the Kconfig menu, by updating the string to 1.9.1. Change-Id: Idb395d0ea65bcf91c7c9645fd76d428936e91587 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/14010 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-03-11arch/x86/smbios: fix length calculation for SMBIOS type 17Iru Cai
Different DIMM modules give different SMBIOS type 17 lengths, so we can't use `meminfo->dimm_cnt*len' for entry struct size, otherwise it'll give a wrong SMBIOS size when two or more different DIMMs are installed on the machine. Change-Id: I0e33853f6aa4b30da547eb433839a397d451a8cf Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14008 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-11Kconfig: remove COMPRESS_PRERAM_STAGES option from x86Martin Roth
Instead of just defaulting to disabled, remove the option for x86 since it doesn't work there. Change-Id: I2b84b9f866f9231943e573b873c970f420c7c9a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14017 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-11cbmem: Fix cbmem_add_bootmem()Andrey Petrov
Change 13363 (555d6c2) introduced a bug where cbmem_add_bootmem() was converted to use a new function. Unfortunately instead of passing a pointer, NULL was passed due to type confusion. This change fixes that problem by passing address of stack variable instead of NULL. Change-Id: Ib8e1add3547cda01f71bf1dea14d3e58bdd99730 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-11northbridge/i945/gma: Re-enable NVRAM tft_brightnessAlexander Couzens
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init) unintentionally changed the code to ignore the NVRAM setting `tft_brightness`. Revert that hunk to restore the original behavior. Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10soc/apollolake: Add memory and reserve MMIO resourcesAndrey Petrov
This adds most important MMIO reserved memory resources, real DRAM memory resources, and some DRAM resources that can not be used as RAM for whatever reason. Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13360 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10cbmem: Add utility to get memory region occupied by cbmemAlexandru Gagniuc
Change-Id: I8e57c23565f173afc0f4d450579b8bfb35aeb964 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/intel/apollolake: Avoid UART BAR relocation at ramstageAndrey Petrov
UART bar gets overwritten during resource allocation stage. As result the serial driver ends up using stale BAR so serial output does not work. This driver simply tells resource allocator not to change BAR of UART device. Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10soc/intel/apollolake: Add ids of internal SoC PCI devicesAndrey Petrov
Change-Id: I6a632ca7d4a19c4973c41bb102f97e0836f27a5e Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13996 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10mainboard/intel/apollolake_rvp: Populate static devicetreeLance Zhao
Add configuration in accordance to "PCI Configuration Matrix". Change-Id: If1f60486d802a6595aed03d95e0d20fc7db21bd2 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13926 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10soc/intel/apollolake: Add chip initializationAndrey Petrov
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/apollolake: Enable all CPU cores using the parallel MP libRavi Sarawadi
This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10src/lib/trace.c: Make address size genericMartin Roth
On platforms that didn't use 32-bit addresses, enabling the CONFIG_TRACE option (Trace function calls) would break the build due to a cast from a pointer of a different size. This fixes this warning: src/lib/trace.c:29:58: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13962 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-10cpu/via/c7: Don't manually include udelay_io.cStefan Reinauer
Use UDELAY_IO selected by CPU_VIA_C7, so no manual inclusion (or secondary UDELAY implementation) is needed Change-Id: Ib086a1bfe8ffca5757bf553c5a62a45da7a410b6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13782 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10northbridge/intel/i440bx: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i440BX boards in the chipset. Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10mainboards/google/auron_paine: add new portGeorg Wicherski
Add a port of Auron_Paine based on upstream Auron and the Auron_Paine code originally from commit bd61dfd in Google branch firmware-paine-6301.58.B . Change-Id: I3a1faec3195a81bb3a6496b8bd610fc8a89e66aa Signed-off-by: Georg Wicherski <gwicherski@gmail.com> Reviewed-on: https://review.coreboot.org/11907 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-09mainboard/intel/apollolake_rvp: Add memory training configLance Zhao
Pass memory training information to MemoryInit, so memory training can be completed. Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-09Makefile: Add build-time overlap check for programs loaded after corebootJulius Werner
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-09northbridge/intel/gm45: Use TSC for ramstage timer per defaultStefan Reinauer
This is a step towards isolating the timer drivers. Change-Id: I4c9349054be0cf520cd4407be9fb393b664223a4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13922 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-09payloads: Move secondary payloads inside of a submenuMartin Roth
To keep the list of 'secondary' payloads from cluttering the payloads menu, move them into their own menu under the payloads menu. Then they don't need any dependencies other than the architecture. Change-Id: I95119750c6ef627ef0de9b5f5cbad085a51ac2bb Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13941 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-09Makefile: Update payload clean targetsMartin Roth
Move payload clean targets into payloads/Makefile.inc Add clean targets for coreinfo, nvramcui, Memtest86+ Change-Id: I70c13582311dfba3e309805053159f8a039cb109 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13940 Tested-by: build bot (Jenkins) Reviewed-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-09drivers/intel/fsp2_0: remove struct resource usageAaron Durbin
There's no need to use a struct resource type for fsp_find_reserved_memory(). struct resource is mainly associated with a device and that memory is added to cbmem after memory init. Other uses ins FSP 2.0 just use struct range_entry. Use that instead for consistency. Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13960 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09drivers/intel/fsp2_0: add TODOs to fix deficienciesAaron Durbin
The FSP 2.0 implementation doesn't handle FSP modules for SoCs that are required to be XIP. There is no notion of "loading" in that situation where one should be copying anything anywhere. Additionally, the loading code does not handle overlaps within the current running program which is doing the loading. Change-Id: Ide145581f1dd84efb73a28ae51b3313183fa127a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13959 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09drivers/intel/fsp2_0: don't leak resourcesAaron Durbin
rdev_mmap() was not followed by rdev_munmap(), thus leaking resources. Fix the leak. Change-Id: Ibdd30d6b64616038013b4bb748f2ad4a98db5472 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13958 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09soc/intel/apollolake: correct comment to reference top of CARAaron Durbin
The memory provided to MemoryInit() for its own usage is at the top of the CAR region. Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13957 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09lib/memrange: add function to initialize range_entryAaron Durbin
In order to enforce the semantics of struct range_entry provide an init function, range_entry_init(), which performs the field initialization to adhere to the internal struture's assumptions. Change-Id: I24b9296e5bcf4775974c9a8d6326717608190215 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13956 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09Add option for "timeless" buildsNico Huber
Builds with BUILD_TIMELESS=1 shall always give a bit identical output for stable inputs. This should help verifying that resulting rom files stay the same across commits that shouldn't change the outcome. To be useful for builds that rely on 3rdparty/arm-trusted-firmware, this needs a similar change there. Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13412 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>