summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-24amd/pi/hudson: Clean up makefile.incMarc Jones
Sort makefile.inc into rom, ram, ver, smm stages and alphabetize. Change-Id: Ic8c6ca2b57527fcc96c135cc801a098201bf0465 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24mainboard/intel/cannonlake_rvp: set Max CPUs and Mainboard FamilyPratik Prajapati
Set MAX_CPUS and MAINBOARD_FAMILY for cannonlake RVP. Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ic6ef7e4f247ac2d227bab3b53512c659c5e72da7 Reviewed-on: https://review.coreboot.org/21152 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-24soc/intel/cannonlake: Add cpu.c and MP init supportPratik Prajapati
Add initial MP init support. This boots up all CPUs. Change-Id: Ia33691c17c663d704abf65320d4bf1262239524d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21081 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-24binarypi mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert from #if to if() for all fan control setup code. Where necessary, make functions non-static to match the prototypes in imc.h. Change-Id: If88af42d00227285931829441909a982fc292b2b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24AGESA mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert all #if to if() for fan control setup. Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24amd/pi/hudson: Convert 48Mhz en to read/write32Marshall Dawson
Change-Id: I91e09757e5eea1eaf9b76921ad032ad2b79c14c5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24amd/bettong: Fix IS_ENABLED for xHCIMarshall Dawson
Convert from #if to if(). Change-Id: Icf6db485735cb8bbadb3e742a079d0bafaacd79c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24mainboard/via*: Drop AMD car.h fileMarc Jones
Don't include src/include/cpu/amd/car.h in Via motherboards. Change-Id: I9d2b3cfb619cf831c7a677992ca03d5f42e5ffd1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24AGESA: Sync f15tn and f15rl northbridge codeKyösti Mälkki
Change-Id: Ia55c82f2245335a5d02e4d6567f606596c8439c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-08-24gizmosphere/gizmo2: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ief40319f5ff83c408e5a2b7f13572feabfab03a4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24biostar/am1ml: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I11ce2a558fe12f8f163dbe3dc52952a273b813ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/abm: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie2f1eb5a101b9c392a7bd5cb2338dd6a6fdcfe52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/pavilion_m6_1035dx: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iffc176522e943c003e2625d8e15341b281a261eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/thatcher: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I7194eb910cccc454c5f20c23629ff2a45b1a9079 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/parmer: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: I3730bf87030b7e20991e1de00d2024e4b02f4c19 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24bap/ode_e20XX: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia747b3bc149a672a6de2ecf0308141172321a493 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/olivehill: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I646a8f4cfc1df8648a72e58814c36ea66b48e9d7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asrock/imb-a180: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5e6e4cabe2b93c41da19412ec3ae2dfaa114bcc0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24msi/ms7721: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I39a0b4acbe44dca8be63201502be739d954c8a33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24asus/f2a85-m: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: I5a6373ac03d942cd16905c9e8360f7179b8eea61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24amd/torpedo: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Iac0998a56b4e297c512fcba98d3dbb4253c9b526 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24mb/google/coral: Copy devicetree.cb from baseboardTim Chen
It is a copy from baseboard/devicetree.cb (coreboot.org ToT) BUG=b:64880573 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: I5db730c1974a96547fe7fda63689b7c5bfaefc66 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/skylake: Usable dram top calculation based on HW registersSubrata Banik
This patch ensures that entire system memory calculation is done based on host bridge registers. BRANCH=none BUG=b:63974384 TEST=Build and boot eve and poppy successfully with below configurations 1. Booting to OS with no UPD change 2. Enable ProbelessTrace UPD and boot to OS. 3. Enable PRMRR with size 1MB and boot to OS. 4. Enable PRMRR with size 32MB and boot to OS. 5. Enable PRMRR with size 2MB and unable to boot to OS due to unsupported PRMRR size. Change-Id: I9966cc4f2caa70b9880056193d5a5631493c3f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23Update depthcharge stable to upstream masterMartin Roth
Updating from commit id 5a086f5c - Tue Jul 11 23:57:30 2017: (ps8751: enable software sync.) to commit id a843f262 - Wed Aug 16 23:37:52 2017: (kahlee: select emmc boot first if available) This brings in 20 new commits. This matches with the updated vboot submodule. Change-Id: If030bc3e75dd470838590540880213bd841154b8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23Update vboot submodule to upstream masterMartin Roth
Updating from commit id 8b714252 - 2017-07-18 02:36:16 (crossystem: Remove defunct sw_wpsw_bootfield) to commit id 8c4b8285 - 2017-08-14 20:37:45 -0700 (detachables: Skip "Enable Developer Mode" in DEV mode) This brings in 6 new commits. Change-Id: I7769035453796a162c6313cd0c87661ef1e64f89 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-23soc/intel/common: Early system agent library access in postcar stageSubrata Banik
BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: Ie5558cdb7acacc34451e1cf63a3e4239e7901c67 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/common: Add functions into common system agent librarySubrata Banik
This patch to add helper functions for memory layout design based on PCI Host Bridge/DRAM registers. BRANCH=none BUG=b:63974384 TEST=Build and boot eve successfully. Change-Id: I95250ef493c9844b8c46528f1f7de8a42cba88a2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23src/mainboard/intel/cannonlake: Add gpio support for cannonlakezhaojohn
Add gpio pins configuration for cannonlake rvp u/y boards. Change-Id: Ia077a070979401fe7bd23bda110d2b66a038d9fc Signed-off-by: john zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23soc/intel/apollolake: Allow overriding dev tree settings by boardKane Chen
This change provides interface to override dev tree settings per board due to many projects share same devicetree.cb. BUG=b:64880573 TEST=Verify that dev tree settings can be overridden in mainboard on coral Change-Id: I349b1678d9e66022b586b6c7f344b831ed631c74 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/21142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-23mb/lenovo/t430s: Enable libgfxinitBill XIE
Tested on T430s with an external screen connected to every one of the DP ports (miniDP on mainboard, two DP ports on dock), the GRUB payload can display on both the external screen and the internal LVDS screen. This is a copy-paste of I8f270d55 "mb/lenovo/x230: Enable libgfxinit". Change-Id: Ifb1471ecb18927c30c61c64011cbb0e20a465558 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-23sb/via/k8t890: Define ACPI sleep statesKyösti Mälkki
Change-Id: I9afd5eaab5f8e897dea037f32e1666ad31b0f8df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23soc/amd/stoneyridge ACPI: Sync sleepstates.asl definitionsKyösti Mälkki
Sync file with southbridge/amd/common/sleepstates.asl. SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Change-Id: I674953f1a5add74e16ddd84c252e8d21501ffefd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23sb/amd/amd8111: Define ACPI sleep statesKyösti Mälkki
Note that against the specs, these definitions repeat the sleep type also in the reserved fields 3 and 4. For consistency, don't fix it here now. Entry for \_S3 is now masked off if HAVE_ACPI_RESUME=n. Change-Id: Icdc4c81d07fe7a99d5b0f8fa23e9443f58a40ab9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AMD fam10 ACPI: Use common fixed sleepstates.aslKyösti Mälkki
SSFG was meant to be used as a mask to enable sleepstates _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. Note that all boards incorrectly had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. Change-Id: Ia948becff079383cbf861468da9e8a3ebbf213cb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AGESA binaryPI: Consolidate and fix sleep statesKyösti Mälkki
SSFG was meant to be used as a mask to enable sleep states _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. State _S3 is now set conditionally if HAVE_ACPI_RESUME=y. For pi/hudson this had been fixed already preprocessor. Note that all boards had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. States _S1 and _S2 still appear enabled in ASL/AML but may not actually work. TEST: 'cat /sys/power/state' and notice choice 'mem' was removed from the list of available sleep states. Change-Id: I27d616871c1771f0c87d8fba23d4ce1569607765 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Tidy up CAR stack switchKyösti Mälkki
Return to empty stack before making the switch. Change-Id: I6d6f633933fac5bc08d9542c371715f737fb42cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-22AMD K8 fam10-15: Tidy up CAR disableKyösti Mälkki
Avoid conflicting disable_cache_as_ram() declaration and tidy up include for inlined function. Change-Id: Iba77c711f5eb023566b7d8ba148583948661bc99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-22vendorcode/intel/fsp/fsp2_0/denverton_ns: Add FSP header files for ↵Mariusz Szafranski
Denverton_NS SoC This change adds the FSP header files for FSP version 2.0 (15D50) for the Intel Denverton_NS SoC. Change-Id: I9672610df09089c549e74072345781bea0b4d06f Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Brenton Dong <brenton.m.dong@intel.com>
2017-08-22soc/intel/cannonlake: Define soc_intel_cannonlake_configPratik Prajapati
- Populate soc_intel_cannonlake_config - Add usb.h and vr_config.h for CannonLake Change-Id: I2a6e737594da1e766b157a38942e19a4f7fb9dfa Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22ec/google: Detect keyboard backlight at runtimePatrick Georgi
This enables adding the backlight driver to boards that may or may not come with a keyboard backlight function. It's the responsibility of the EC to report if that feature exists, but that's not a big extra burden given that it already keeps track of everything else related to the backlight. BUG=b:64705535 BRANCH=none CQ-DEPEND=CL:620595 TEST=configured KBLE manually and noticed the presence/absence of /sys/devices/platform/GOOG0002:00/ on a Chrome OS Linux kernel, corresponding to the value reported by the EC. Change-Id: Idc36bfaa6e69581ba19b52d37af6956f63cfdb8f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22soc/intel/skylake: Lock sideband access in coreboot and not in FSPBarnali Sarkar
The Sideband Acces locking code is skipped from FSP by setting an FSP-S UPD called PchSbAccessUnlock. This locking is being done in coreboot during finalize.c. This is done because coreboot was failing to disable HECI1 device using Sideband interface during finalize.c if FSP already locks the Sideband access mechanism before that. So, as a solution, coreboot passes an UPD to skip the locking in FSP, and in finalize.c, after disabling HECI, it removes the Sideband access. BUG=b:63877089 BRANCH=none TEST=Build and boot poppy to check lspci not showing Intel ME controller in the PCI device list. Change-Id: I8dba4c97480200507969b0f2873337f97bd2ff6a Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-22google/kahlee: Enable ALS connected to ECAkshu Agrawal
Kahlee has an ambient light sensor connected to the EC. TEST=Can see the device in /sys/bus/iio BUG=b:62030268 Change-Id: Id1138a0fc5270489a734bdf8b1f4ac02d358c0df Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/21146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22mainboard/intel/cannonlake_rvp: remove redundant devicetree.cbPratik Prajapati
devicetree.cb of cannonlake-u and y variant gets picked up from src/mainboard/intel/cannonlake_rvp/variants/cnl_[u/y] Change-Id: I83f636c93407a6fe17114582506397c46d1b4e20 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-22mainboard/intel/cannonlake-y: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-Y RVP Change-Id: I311437798274dd48b0898f0832bf03d86fd9d3a6 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/intel/cannonlake-u: populate PCI devicesPratik Prajapati
Define and populate PCI devices in devicetree for CNL-U RVP Change-Id: Id04f5efe77a04c180b5dd392da777195bd9fb7a3 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-08-22mainboard/google/coral: Overwrite family code for coral models.Harry Pan
This patch assigns the code of coral family, such that, the 'mosys platform family' returns 'Google_Coral'. BUG=b:64467244, b:64501879 BRANCH=none TEST=Examine 'mosys platform family' w/ new firmware. Change-Id: I1d8f8ca2166a1d80855608cf5b64b0cc7bf3dc93 Signed-off-by: Harry Pan <harry.pan@intel.com> Reviewed-on: https://review.coreboot.org/21136 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-22util/msrtool: Exit program after displaying the help messageMaciej Suminski
In case there is no mode selected, sys and cpu variables are not initialized, causing a segfault on exit (goto done). Change-Id: I4a183c267e306598627c1612f4633f1e19019f3c Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21026 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-08-22util/inteltool: Remove duplicated error message, switch to snprintfMaciej Suminski
Passing a string containing output from strerror() to perror() causes double error message display. It is also causing segfaults when the error message is longer than temp_string capacity. To fix the problems, sterror() call has been removed so the error message is printed only once. This could be enough to avoid segfaults, but it is a good practice to limit output size with snprintf(). Change-Id: I5ccc37e404f278cafae0a451c5acaa27d7907cce Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-21soc/intel/cannonlake: Enable common PMC code for CNLLijian Zhao
This update changes Cannonlake to use the new common PMC code. This will help to reduce code duplication and streamline code bring up. Change-Id: Ia69fee8985e1c39b0e4b104c51439bca1a5493ac Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Fix SGX init sequencePratik Prajapati
Configure core PRMRR first on all the cores and then follow the SGX init sequence. Second microcode load would run the MCHECK. To pass MCHECK, PRMRR on all cores needs to be configured first. Hence, PRMRR configuration would be called from soc_core_init while MP init for each core and then from soc_init_cpus, BSP would call sgx_configure for each core (including for itself). This code flow satisfies the MCHECK passing pre-conditions; and apparently this patch fixes the behavior of calling configure_sgx() “again” for BSP. (So removed the TODO comment also). Change-Id: I88f330eb9757cdc3dbfc7609729c6ceb7d58a0e1 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21007 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21intel/common/block/sgx: Refactor SGX common codePratik Prajapati
To correct the SGX init sequence; PRMRR on all cores first needs to be set, then follow the SGX init sequence. This patch would refactor the common SGX code (and add needed checks in the init sequence) so that SOC specific code can call SGX init in correct order. Change-Id: Ic2fb00edbf6e98de17c12145c6f38eacd99399ad Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21intel/common/mp_init: Refactor MP Init code to get rid of microcode paramPratik Prajapati
Remove passing microcode patch pointer as param while calling - soc_core_init() - soc_init_cpus() Also change callbacks in apollolake/geminilake and skylake/kabylake common code to reflect the same function signature. Change-Id: Ib03bb4a3063d243d97b132e0dc288ef3868a5a7b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21010 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21superio/winbond/w83627*: Remove deprecated codeKeith Hui
Early serial for W83627[HF|EHG] superios are handled by superio/winbond/common/early_serial.c. Remove code thus deprecated. Build tested on select affected mainboards. Change-Id: Idad6e0281f7a272e184feff686ce1407825429c7 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21Boards w/ Winbond superios: Use common config entry codeKeith Hui
Six mainboards with Winbond superios directly configure them in romstage.c. All use the common Winbond romstage code. Change them to use the common config entry code to allow for code refactoring such as [1]. Build tested. [1] https://review.coreboot.org/20988 Change-Id: Icecd52ec622b9da86edb07c52893f4db001e5562 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21mainboard/asrock: add ASRock B75 Pro3-MIru Cai
Tested: - i5-3550 and DIMM configurations: 2+0+2+2, 0+2+2+2, 2+2+2+2, 4+2+4+2 - debug output from serial port, EHCI debug port not found - Arch Linux (Linux 4.11.5) loaded from SeaBIOS, GRUB2, and Linux payload - all PCI and PCI Express slots Issues: - sometimes the machine fails to boot, with serial debug output it can be seen it stucks after SMM initialization, and more likely to fail to boot when serial cable is attached - no S3 resume (not tested in vendor firmware) Change-Id: I94fbfcee06921538b32aa3c23efa642e7e405ef6 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-21libpayload: add time()Nicola Corna
Change-Id: I97e393537ccc71ea454bb0d6cdbbb7ed32485f1e Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21ec/lenovo/h8: Add panic methodPatrick Rudolph
Add two additional LED IDs. Add Kconfig menu entries to allow selecting the action to execute on death. Overwrite weak die_notify method to notify user on death. Flash all LEDs and play beep code 10 depending on Kconfig options. Successfully tested on: Tested on Lenovo T500. Tested on Lenovo X200. Tested on Lenovo T430, but only LEDs are flashing. Change-Id: Id34d399f154952a48c1f4ccb0c41a238b2d7ccb8 Signed-off-by: Patrick Rudolph <siro@das-labor.org Reviewed-on: https://review.coreboot.org/19695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-21google/snappy: Add Raydium touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64821783 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8852e38f01f82b80c2c9718b93baf5894dbd745b Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-21google/snappy: Add MELFAS touch screen supportKevin Chiu
Current coreboot does not create ACPI device for OS to recognize MELFAS touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64779224 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: If2bc910d641e0cf2b120ed883c5788542959f568 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21intel/common/sgx: Use intel_mp_current_microcode() to get microcode pointerPratik Prajapati
Get microcode patch pointer from intel_mp_current_microcode() api of mp_init and change sgx_configure function signature to drop microcode_patch param. Change-Id: I9196c30ec7ea52d7184a96b33835def197e2c799 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21009 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-21soc/intel/cannonlake: Add support for all UART port indexSubrata Banik
Select LPSS UART Base address based on LPSS UART port index. Change-Id: I31b239e7e6b7e9ac8ea2fcfbcbd8cb148ef9e586 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Add support for all UART port indexSubrata Banik
Select LPSS UART Base address based on LPSS UART port index. Change-Id: I306d3d299f8d6a890ae519c74008f9d0d9dd1a76 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/cannonlake: Add Kconfig option to select UART indexSubrata Banik
Cannonlake SOC has two possible ways to make serial console functional. 1. Legacy IO based access using Port 0x3F8. 2. LPSS UART PCI based access. This patch to provide option to select index for LPSS UART port: 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 PCI based LPSS UART2 is by default enabled for Chrome Design. Change-Id: I7afa5ab2c5eb06e6df8eeb1cb1cd0de00d2b2a28 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Add Kconfig option to select UART indexSubrata Banik
Skylake/Kabylake SOC has two possible ways to make serial console functional. 1. Legacy IO based access using Port 0x3F8. 2. LPSS UART PCI based access. This patch to provide option to select index for LPSS UART port: 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 PCI based LPSS UART2 is by default enabled for Chrome Design. Change-Id: I9647820fe59b5d1a1001a611b9ae3580946da0ae Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/apollolake: remove duplicate gpio GPE definesAaron Durbin
Remove the duplicate MISCCFG_GPE0_DW* macros that are already present in the common gpio code. Change-Id: Iad75e5f7e276b37b5861f0c9a3bb0bb2824a638c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21intel/common/cpu: Add function to get microcode patch pointerPratik Prajapati
Add mp_current_microcode() function to get the microcode patch pointer. Use this function to avoid reading the microcode patch from the boot media. init_cpus() would initialize microcode_patch global variable to point to microcode patch in boot media and this function can be used to access the pointer. Change-Id: Ia71395f4e5b2b4fcd4e4660b66e8beb99eda65b8 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/common/smbus: Don't clear random bitsNico Huber
FSP might have done some settings for us there. Use pci_update_config32() since the register is documented to be 32 bits wide. Change-Id: I995e8a731a6958f10600174d031bb94f5a0a66db Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21mainboard/google/poppy: Update VR config settingsFurquan Shaikh
Update Psi2Threshold, IccMax, ACLoadline and DCLoadline VR config settings to match that of soraka. BUG=b:62063434 BRANCH=None TEST=Build and boot poppy. Change-Id: I2c294eb14257d319e1e2d4d1e529481d921ba6f8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21105 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-21mainboard/google/poppy: Remove MPS IMPV8 workaroundFurquan Shaikh
Poppy uses MPS2949 IMVP8 controller and does not need the VR workaround similar to Eve. Change-Id: If6fb1890e024e1488d278bbe0a71a1a63ee321af Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21104 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
2017-08-20util/inteltool: Fix a comparison between signed and unsigned integersMaciej Suminski
Change-Id: Ic6489c408a87213d3c39626c5379a44acea2c34d Signed-off-by: Maciej Suminski <maciej.suminski@cern.ch> Reviewed-on: https://review.coreboot.org/21024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-20util/me_cleaner: Pull the latest changes from upstreamNicola Corna
Relevant changes (commit 2e8761e): * Add an option to truncate the ME image file * Add full support for Skylake (ME 11) and following, including modules removal, truncation informations and partition relocation * Add two options to generate a shrinked ME image file and the corresponding descriptor with a modified flash layout * Update README.md * Bug fixes Also add a link to the usage guide in the Kconfig help. Change-Id: I690c5d558139f64f38babf3c0988b53834ba8b37 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/20915 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-08-20payloads/external/GRUB2: Only rebuild on config changesNico Huber
Change-Id: I376eea9a3e02b03010fc5c5a05199ea7b2813220 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/20991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-20sb/intel/common: Fix SMBus block commandsArthur Heymans
Clear LAST_BYTE flag at beginning of block commands. For reads, slave device determines in the message format how many bytes it has to transfer out, host firmware only dictates the maximum buffer length. Return SMBUS_ERROR if only partial message was received. For writes, return SMBUS_ERROR if length > 32. For writes, fix off-by-one error reading memory one byte past the buffer end. Change-Id: If9e5d24255a0a03039b52d2863bc278d0eefc311 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-20nb/intel/x4x: Fix booting with FSB800 DDR667 combinationArthur Heymans
A small typo in the dll setting code prevented this combination from booting. TESTED on ga-g41m-es2l with 800MHz FSB CPU and 667MHz ddr2 Change-Id: Ib013471773c20336ba0902b7f328bfb6ef970747 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-08-20nb/intel/x4x/raminit: Rework receive enable calibrationArthur Heymans
Moves receive enable calibration to a separate file to lighten raminit.c a bit. Receive enable calibration is quite similar to gm45 so it reuses some of its function names. The functional changes are: * the minimum coarse is now reset for each channel; * on the second fine search for DQS high, TAP overflow is handled by increasing medium; * start coarse at CAS + 1 instead of CAS - 1. Other Intel northbridges do the same and the results are more in line with register dumps from vendor bios. These might improve stability. TESTED on ga-g41m-es2l Change-Id: I0c970455e609d3ce96a262cbf110336a2079da4d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-20mb/gigabyte/ga-b75m-d3v: add libgfxinit supportBill XIE
On this device libgfxinit successfully initializes textmode and framebuffer mode on the device connected to the HDMI1 port. VGA port is not tested, due to lack of VGA with valid EDID. Every ports works on GNU/Linux with kernel version 4.9+80+deb9u1. Due to limitations within the libgfxinit's current build system, it needs "select NORTHBRIDGE_INTEL_IVYBRIDGE" to work, even it is PCH instead of CPU for which libgfxinit should be configured here. Change-Id: Ib1513fc57b79eebc5d047c2e24585731c44bc215 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-19arch/x86: Sanity checking on HAVE_SMI_HANDLERKyösti Mälkki
Fail at build-time if one of the following happens: Platform includes SMI handler setup function smm_init() in the build when configuration has HAVE_SMI_HANDLER=n. Platform does not implement smm_init_completion() when HAVE_SMI_HANDLER=y. Change-Id: I7d61c155d2b7c2d71987980db4c25d520452dabf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-19intel/smm/gen1: Backup default SMM areaKyösti Mälkki
Fix low memory corruption on S3 resume path. Affected platforms were sandy/ivybridge. Change-Id: I7379e7396b61ee4dc2438276d530feffaa1bc8f2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21100 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-08-19i82801dx/gx/ix/jx: Add low-memory backup for S3 pathKyösti Mälkki
SMM relocation code overwrite low memory owned by OS. Change-Id: Ifa3d28bed3d3db65b0707bde62ae2b424a231f1a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19405 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-19arch/x86: Clean up CONFIG_SMP and MAX_CPUS testKyösti Mälkki
Change-Id: I7c138758707f87c0d7a827b6887c7752d3714cde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-19arch/x86: Fix ugly NEED_LAPIC useKyösti Mälkki
Change-Id: I2d6fdfd0465fe5f558daa04c6f980f7226596b55 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21087 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-19soc/intel/skylake: Enable power button SMI when jumping to payloadFurquan Shaikh
Instead of enabling power button SMI unconditionally, add a boot state handler to enable power button SMI just before jumping to payload. This ensures that: 1. We do not respond to power button SMI until we know that coreboot is done. 2. On resume, there is no need to enable power button SMI. This avoids any power button presses during resume path from triggering a shutdown. BUG=b:64811381 Change-Id: Icc52dc0103555602c23e09660bc38bb4bfddbc11 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-18nb/intel/i440bx: Compile debug.c only if CONFIG_DEBUG_RAM_SETUPKeith Hui
... is enabled. Otherwise we are compiling an effectively empty file. Change-Id: I4e3d982066d1fa66a3da5f37e278ec7fd5bb1ea8 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2017-08-18device/smbus: Reuse I2C bus operations where applicableNico Huber
Reuse generic I2C functions that work for SMBus operations as well. Change-Id: I5a93f17b905de38752254891aa4347ba4ed3b205 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
Change-Id: Ib31e77eec639c231520198c0b978d6c3c1eadaed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18Reinvent I2C opsNico Huber
Do not use the global platform_i2c_transfer() function that can only be implemented by a single driver. Instead, make a `struct device` aware transfer() function the only interface function for I2C controller dri- vers to implement. To not force the slave device drivers to be implemented either above generic I2C or specialized SMBus operations, we support SMBus control- lers in the slave device interface too. We start with four simple slave functions: i2c_readb(), i2c_writeb(), i2c_readb_at() and i2c_writeb_at(). They are all compatible to respec- tive SMBus functions. But we keep aliases because it would be weird to force e.g. an I2C EEPROM driver to call smbus_read_byte(). Change-Id: I98386f91bf4799ba3df84ec8bc0f64edd4142818 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18kbc1126_ec_dump: fix some errorsIru Cai
- fix the error caused by signed integer extension - fix fopen mode - one minor style fix Change-Id: Iacc4ea50515ea219bc1868dae0446d576e8dce0c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 8460pIru Cai
The code is based on autoport. I'm using a machine with discrete GPU, and gfx.* in devicetree.cb is from 2760p. It can be debug with serial port on dock. Tested: - CPU and memory: i5-2540M, 4G+0 - Arch Linux (Linux 4.11.7, SeaBIOS payload, with ATOM BIOS extracted from vendor UEFI firmware) - USB ports - SD card reader - WLAN - DP display - S3 Change-Id: I9c42723ba240a2e9b46998c1a8a708aebc66c604 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2570pIru Cai
The code is based on autoport. The EHCI debug port is the upper USB port beside the battery. Tested and working: - CPU and memory: i7-3720QM, 4G+4G - Linux Mint with Linux 4.4 (SeaBIOS payload) - All USB ports - ExpressCard - WLAN - AC and battery status - S3 - Other devices detected: DVD drive, smartcard reader, fingerprint, bluetooth Not tested: - VGA and DP - Ethernet and modem - Dock Change-Id: I9f3cd124fc676d49add59e9f0a07f70a6bb0fff0 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 8470pIru Cai
The code is based on the code generated by autoport. The EHCI debug port is between the DP port and eSATA port. The serial port on dock can also be used for debugging. The model with discrete graphics is not tested. Tested and work: - memory: 0+4G, 4G+0, 4G+4G - Linux (Arch Linux with kernel 4.10.6) boot from SeaBIOS payload with native graphics init - WLAN - keyboard, trackpoint and touchpad - USB - serial port on dock - fan control - AC and battery status (EC) blobs: This laptop uses SMSC KBC1126 EC, and there are two blobs needed by it. You can use the tools in util/kbc1126/ to extract them and insert them to the coreboot image using the following configuration: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: Icbc051e2272b8ea73627940db15a56901d737472 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2760pIru Cai
The code is generated by autoport. The flash chip is socketed beside the WLAN slot. The EHCI debug port is on right side of the laptop beside the RJ11 connector. Things that work: - memory: 0+8G, 4G+8G - Linux (Linux Mint 18.1 with Linux 4.4) - native graphics init + SeaBIOS payload with SeaVGABIOS - all 3 USB ports - WLAN - WWAN - SD card reader - expresscard - S3 suspend and resume - internal flashing after IFD is unlocked and coreboot is flashed - keyboard, trackpoint and touchpad - fan control - AC and battery status Issues: - Wacom digitizer does not work (even after I add it in DSDT) - GRUB payload will freeze (in all Elitebooks, including chainloading GRUB from SeaBIOS) Things that are not tested: - smart card reader - cable modem (EC) blobs: This laptop uses SMSC KBC1126-NU as EC. It needs two blobs in the flash chip. You can use the tools in util/kbc1126 to extract them from OEM firmware, and use the following configuration to insert them to coreboot image: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: I3ffdb9f9c71f6c9a84e896abc3c424c8dd4bed0e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18payload/tianocore: Add patch to preserve coreboot tableArthur Heymans
Credit for this patch goes to 'ReddestDream'. The patch is pulled from https://github.com/MattDevo/edk2 TESTED on thinkpad X200. Change-Id: I1517607cee8308c5f5443c58c16ce44056611e92 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-17soc/intel/common/block: Add functions to common CPU library codeShaunak Saha
This patch adds few helper functions in CPU common libraray code which are mainly needed for ACPI module. The functions those are moved to cpu common code is removed from common acpi files. TEST= System boots properly and no regression observed. Change-Id: Id34eb7e03069656238ca0cbdf6ce33f116e0e413 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21051 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-17soc/intel/cannonlake: Add SPI flash controller driverLijian Zhao
Add SPI driver code for the SPI flash controller, including both fast_spi and generic_spi. Change-Id: Ie45146721f39d3cec20ff5136adf8925c75da1cd Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-17intel/cannonlake/chip: Add initial PCI enum supportPratik Prajapati
Add callbacks for initial PCI devices enumeration. Change-Id: Ia8a51973aa2b805d62590114bfc49968244b1668 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-17intel/common/block/fast_spi: Add config option to disable write statusDuncan Laurie
Chrome OS systems rely on the write status register to enable/disable flash write protection and disabling this opcode breaks the ability to enable or disable write protection with flashrom. Add a configure option for this feature that will disable the opcode for Write Status commands unless CONFIG_CHROMEOS is enabled. Tested to ensure that a default build without CONFIG_CHROMEOS has this option enabled while a build with CONFIG_CHROMEOS does not. Also ensured that when this option is disabled (for Chrome OS) then flashrom can be used with the --wp-enable and --wp-disable commands, depending on the state of the external write protect pin. Change-Id: Ia2ef3c3b1e10fba2c437e083f3537022f1fce84a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/21021 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-08-17arch/x86: Make postcar TempRamExit call genericMarshall Dawson
Move the FSP-specific call for tearing down cache-as-RAM out of postcar.c and replace it with an empty weak function. This patch omits checking if (IS_ENABLED(CONFIG_FSP_CAR)). The temp_ram_exit.c file with the real fsp_temp_ram_exit() is only built when CONFIG_FSP_CAR is true. Change-Id: I9adbb1f2a7b2ff50d9f36d5a3640f63410c09479 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20965 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-17soc/intel/apollolake: Fix CONFIG_FSP_CAR build errorMarshall Dawson
Remove cpu.h from the cache-as-ram setup and teardown files that rely on the FSP implementation. The struct device statement causes a build failure and there appears to be nothing needed from cpu.h in the two .S files. TEST: Build Google Reef with FSP_CAR selected on Chipset menu and add FSP binaries on the Generic Drivers menu. Change-Id: I560b730c18d7ec73b65f2e195b790e7dcacfd6bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21057 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>