summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-12southbridge/amd/sb700: Fix SATA port 4/5 drive detectionTimothy Pearson
Change-Id: I01481f25189d01b6f4ed778902b2ecc4d39c7912 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12southbridge/amd/sb700: Recover if AHCI disk detection failsTimothy Pearson
The SB700 silicon is somewhat buggy; if the links come up in an incorrect state after POR the silicon cannot automatically recover. If a disk fails to come online, reset the associated link and try disk detection again. Change-Id: I29051af5eca5d31b6aecc261e9a48028380eccb3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11999 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12northbridge/amd/amdmct/mct_ddr3: Update prefetcher configurationTimothy Pearson
The existing prefetcher configuration was incorrect; use the correct values from the AMD Family 10h and Family 15h BKDGs as appropriate. Change-Id: I287ffa6345e1f4d232d4b2ea4251650ada3fda92 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12417 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12northbridge/amd/amdmct: Clear memory before enabling ECCTimothy Pearson
The existing code enabled ECC before clearing memory. As the AMD CPUs will generate MCEs on any invalid check bits, this resulted in random lockups during memory training due to the uniniailized check bits. Initialize ECC check bits before enabling ECC hardware. Change-Id: I992e7040520570893ba6a213138dd57bfa14733b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11996 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-12src/southbridge/amd/sb700: Reset SATA controller in AHCI mode during startupTimothy Pearson
In AHCI mode SeaBIOS randomly fails to detect disks (AHCI timeouts), with the probability of a failure increasing with the number of disks connected to the controller. Resetting the SATA controller appears to show the true state of the underlying hardware, allowing the drive detection code to attempt link renegotiation as needed. Change-Id: Ib1f7c5f830a0cdba41cb6f5b05d759adee5ce369 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11998 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-12southbridge/amd/sb700: Do drive detection even in AHCI modeTimothy Pearson
SeaBIOS AHCI drive detection randomly fails for drives present on the secondary channel of each AHCI SATA BAR. Forcing native drive detection in AHCI mode resolves this issue. Change-Id: I34eb1d5d3f2f8aefb749a4eeb911c1373d184938 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12mainboard/asus/kgpe-d16: Add sata_alpm CMOS optionTimothy Pearson
Change-Id: I2f2658eb8b3142c86fef4ee50792f51954686cca Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12409 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12mainboard/asus/kgpe-d16: Add dimm_spd_checksum CMOS optionTimothy Pearson
Change-Id: I12323d76ab90f643f4dd4351d7e99824ec24f9be Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12408 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-12src/northbridge/amd/amdmct: Add option to override bad SPD checksumTimothy Pearson
Certain DIMMs, for example DIMMs on which the EEPROM has been modified by the end user, may not contain a valid SPD checksum. While this is not a normal condition, it may be useful to allow a checksum override while memory timing parameters are being altered, e.g. in the course of overclocking or underclocking, or when recovering from a bad SPD write. This is an advanced level feature primarily useful for debugging and development. Change-Id: Ia743a13348d0a6e5e4dfffa04ed9582e0f7f3dad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-12AMD/Mullins: Fix the interrupt routingZheng Bao
The plugged devices on PCIe should use IOAPIC2 instead of standard IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1. The unchanged code worked because the OS uses MSI instead APIC. To test that, boot linux with parameter pci=nomsi and see if the devices like NIC work well as they do without the booting parameter. run 'cat /proc/interrupts' to see if devices actually use no-msi. Change-Id: I5eab28956b7a3fbc7c10447e99d6c11dbe6a1d14 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12363 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-12AMD/Kabini: Fix the interrupt routingZheng Bao
The plugged devices on PCIe should use IOAPIC2 instead of standard IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1. The unchanged code worked because the OS uses MSI instead APIC. To test that, boot linux with parameter pci=nomsi and see if the devices like NIC work well as they do without the booting parameter. run 'cat /proc/interrupts' to see if the devices actually use no-msi. Change-Id: Id6d35224312aeb6e3a175ec9990e0bb34bad67e7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12362 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-12southbridge/amd/sb700: Add option to disable SATA ALPMTimothy Pearson
The AMD Register Programming Reference states that the user should have the option to disable Active Link Power Management for two reasons. First, some drives may not function correctly with the ALPM implementation of the SP5100, and second there are some situations where low latency access is more important than the power savings created by using ALPM. Allow the user to disable ALPM if desired. Change-Id: I88055cbb4df4d7ba811cef7056c0a6ca2612fcb0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11993 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12mainboard/asus/kgpe-d16: Add missing IRQ routing for PIKE cardTimothy Pearson
Change-Id: I6eba36dad71a2a2713181382484dc0e0976e1dad Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11988 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-12northbridge/amd/amdmct: Verify MCT NVRAM options before skipping trainingTimothy Pearson
Change-Id: If26e5d148a906d63bd1407b8ffa58f08ae6b4275 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11986 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11mainboard/asus/kgpe-d16: Add maximum_p_state_limit CMOS optionTimothy Pearson
Change-Id: I9a7049fd5601da10a954e02427ad59189fa93fa9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12407 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-11libpayload: Rename PDCurses-3.4 to PDCursesStefan Reinauer
Change-Id: If881ec130833c7e7e62caa3d31e350a531f5bc8e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12398 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11PDCurses: Don't hard code version numberStefan Reinauer
Don't hard code the PDCurses version number in every file added to the object list. Change-Id: Ic2e9230b7e3089c60dd7f442e3ea7baffb4aa400 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12397 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11Makefile.inc: Build test intelvbttoolPaul Menzel
Add intelvbttool to list of utilities to be build tested by the build servers. Change-Id: Id75724726778fd939fb7497f5b33a3d5d58124fd Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12085 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11northbridge/amd/amdmct: Fix crash on startup due to NULL pointer accessTimothy Pearson
Change-Id: I47089f2ad886a6fda4e0cd4472efd975bb8e06c5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11995 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-11-11mainboard/asus/kgpe-d16: Set SP5100 subtypeTimothy Pearson
Change-Id: If839fd71ed12c1fe27aeab374e242a6855737f5d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11994 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11northbridge/amd/amdmct: Fix hang on boot due to invalid array accessTimothy Pearson
Change-Id: I47755caf7d2ff59463c817e739f9cb2ddd367c18 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11989 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11northbridge/amd/amdfam10: Add ability to set maximum P-state limitTimothy Pearson
Under specific circumstances, for instance in low power or fanless machines, it may be useful to cap the maximum P-state of the CPU. Allow the maximum CPU P-state to be set via an NVRAM option. Change-Id: Ifdbb1ad11a856f855c59702ae0ee99e95b08520e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11985 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-11google/veyron_emile: adjust to the spec of emileZhengShunQian
o. Make some gpio changes base on Emile spec. o. Init sdmmc function. o. Revert cpu freq reducing in recovery mode since Emile have more effective thermal than Mickey. o. Revert the changes of lpddr3-samsung-2GB config. BUG=chrome-os-partner:46658 TEST=build and boot on Emile BRANCH=veyron Change-Id: Ibdc2ce511c8e215c202e2067d79f4c60cdfca738 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39e5436c8aa3353af77f62e548f48d19dc722999 Original-Change-Id: Ib2c78c9b5e3ac6620ab1772879a7ea0f7007f96e Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/307651 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/12396 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/kunimitsu: Enable wake from touch pad.Archana Patni
This patch enables GPP_B5 as ACPI_SCI for wake. It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW. BUG=chrome-os-partner:43491 BRANCH=none TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board. Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311007 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12395 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11google/veyron_emile: Add new board of veyronZhengShunQian
This is a copy of mickey and renamed. CQ-DEPEND=CL:306967 BUG=chrome-os-partner:46658 TEST=build coreboot BRANCH=veyron Change-Id: I9e1232f3f1334ec747a5beb52f214635a7ab08ae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9316a9ec27d5799e290add1e5818f4449b680fde Original-Change-Id: I906de7bbc8b8e110e0774c14ec636a327230b325 Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/307620 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/12394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11google/chell: Add chromeos.c to verstageDuncan Laurie
When enabling CONFIG_SEPARATE_VERSTAGE the functions in chromeos.c need to be put into verstage. BUG=chrome-os-partner:46289 BRANCH=none TEST=enable SEPARATE_VERSTAGE and build for chell Change-Id: Ic58a6e383806a7a64b9af760e194fddf15c645f1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 403f0707074802371237beecf1941034c1612f10 Original-Change-Id: Ib1154869974337b53a64efa5892a83ecd81973b8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/310928 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11google/chell: Disable Deep S3Duncan Laurie
In order to wake from trackpad and wifi we cannot enable Deep S3. BUG=chrome-os-partner:46289 BRANCH=none TEST=wake from trackpad on chell Change-Id: Ieb2210d5d15b5f5d744a686c743df11e5d72558f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cbc74e13b754249869144df84ab2bb9b7e77119a Original-Change-Id: I84265197fb964e0594a4672a40fd3e2362e29ae1 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311306 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12392 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11google/chell: Add SPD for new memory typeDuncan Laurie
This adds the SPD for SK-Hynix H9CCNNNCLTMLAR memory to be used in the EVT build. BUG=chrome-os-partner:47346 BRANCH=none TEST=emerge-chell coreboot Change-Id: I45d0840e43ed81d8286b005f0a99b014b7f0cf28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1e917440141c586cb370147f9c5b782d6e77ea10 Original-Change-Id: I02f1349f38d83f4a09887adf81384b5a8f475dd0 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311214 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12391 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11intel/skylake: mainboards: Add MAINBOARD_FAMILY kconfig entryDuncan Laurie
The family variable was not being set yet for skylake, add this to the current boards. BUG=chromium:551715 BRANCH=none TEST=emerge-glados coreboot Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311213 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11google/chell: Fix USB port assignment againDuncan Laurie
The net names are offset by 1. My board is not stable enough to really test all of these yet... BUG=chrome-os-partner:46289 BRANCH=none TEST=emerge-chell coreboot Change-Id: I65e17323f2819eca130c1bf0ccbc3ea0ec2f383f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 327194dcfcb3a5c9f431b1a2e26c230cb2b2a48b Original-Change-Id: I50e9ea091bb6e6a1da3a9434ae0fbf3f652fa354 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/311113 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12389 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11util/release: Add release notes generator scriptMartin Roth
This script generates the rough format for the release notes, and will add new commits to the top of an existing release notes text file. At that point, a lot still needs to be done by hand - deciding which commits deserve to be in the release notes, and which don't. When updating the existing release notes, The updates are just added to the top of the file, and need to be placed manually. This just helps prevent missed commits. When editing the release notes, don't delete or modify the commit id lines after they've been classified - Just move them to the bottom of the file until the notes are ready to publish. This keeps those commits from re-appearing at the top of the file the next time the script is run to update the notes. Change-Id: I0a699c528117f0347a65a3bed4402f3a57309e3c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12318 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-11mainboard/asus/kgpe-d16: Add SATA AHCI mode CMOS optionTimothy Pearson
Change-Id: If7b6062fd4df16ae2864b5d9adfdd19c4356691c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12400 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-11northbridge/amd/amdmct: Skip DCT config write to Flash if unchangedTimothy Pearson
Change-Id: I5fee5f5fdf30ab6e3c4f94ed3e54ea66c1204352 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11980 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
This patch adds CC6 power save support to the AMD Family 15h support code. As CC6 is a complex power saving state that relies heavily on CPU, northbridge, and southbridge cooperation, this patch alters significant amounts of code throughout the tree simultaneously. Allowing the CPU to enter CC6 allows the second level of turbo boost to be reached, and also provides significant power savings when the system is idle due to the complete core shutdown. Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11979 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11via/cx700: Fix hidden compile error and make sure it won't hide againPatrick Georgi
A wrong function name made an #ifdef'd code path not compile. Fix that, and also use IS_ENABLED() to make sure that such issues won't come up again there. Change-Id: Iccb98842dde498cce32cd86a770e22a506ad4cc2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/12296 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11asus/k8v-x: Add more subsystem IDs to device treeUrja Rannikko
This is an attempt at better compatibility with driver matching etc. Change-Id: I26eccbe17a31ba2042d0fe1bb424d9f380c0a82e Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-on: http://review.coreboot.org/12351 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11asus/k8v-x: Add PIRQ tables to init PCI IRQ configUrja Rannikko
Pulled getpir from the attic and used data provided by it to create the table a bit more programmatically and added the AGP slot so the video card is given an IRQ Change-Id: Id3dc1a77ac6382405f5f36707994287e84e1168b Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-on: http://review.coreboot.org/12350 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
Up to now the GPIO set up macros for input sets up GPIOs to be mapped to memory space while macros for outputs sets up GPIOs to be mapped to legacy io space. This patch adds two additional macros for legacy output definition and changes the old macros to memory space mapping. In addition, the intel/minnowmax mainboard is modified to use the legacy macros for outputs to ensure this mainboard stays unchanged in terms of functionality. TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux. Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/12340 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-11mainboard/asus/kgpe-d16: Enable CC6Timothy Pearson
Change-Id: Iae1cbe7d3a6471561abfdb8e182bc764c38bb222 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11978 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-11-11northbridge/amd/amdfam10: Enable CC6 DRAM save area setupTimothy Pearson
Change-Id: Ibeb35da3395dc77a21a2f92f0e1d0845be53d175 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11977 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11amd/amdmct/mct_ddr3: Use training values from previous boot if possibleTimothy Pearson
DRAM training accounts for most of the romstage startup time, yet if the hardware configuration has not changed from the previous boot the previously discovered training values are still valid. Use them if the DIMM configuration has not changed since the last boot. The SPD values of all installed DIMMs are hashed and stored in the S3 resume data area of the main system Flash device. If a DIMM is changed the hash will almost certainly change as well, forcing retraining on next boot. Change-Id: I37ed277b16476d38e4af76c6ae827a575c6b017d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11976 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11southbridge/amd/sb700: Fix build failure from merging patches out of orderTimothy Pearson
Change-Id: Ib6d1be64691cf5a1c0b7464284fbae4e583f383e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12402 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
When we first added ARM support to coreboot, it was clear that the bootblock would need to do vastly different tasks than on x86, so we moved its main logic under arch/. Now that we have several more architectures, it turns out (as with so many things lately) that x86 is really the odd one out, and all the others are trying to do pretty much the same thing. This has already caused maintenance issues as the ARM32 bootblock developed and less-mature architectures were left behind with old cruft. This patch tries to address that problem by centralizing that logic under lib/ for use by all architectures/SoCs that don't explicitly opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option). This works great out of the box for ARM32 and ARM64. It could probably be easily applied to MIPS and RISCV as well, but I don't have any of those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and leave that for later cleanup. BRANCH=None BUG=None TEST=Built Jerry and Falco, booted Oak. Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-11-11arm64: mmu: Make page table manipulation work across stagesJulius Werner
In order to have a proper runtime-modifyable page table API (e.g. to remap DRAM after it was intialized), we need to remove any external bookkeeping kept in global variables (which do not persist across stages) from the MMU code. This patch implements this in a similar way as it has recently been done for ARM32 (marking free table slots with a special sentinel value in the first PTE that cannot occur as part of a normal page table). Since this requires the page table buffer to be known at compile-time, we have to remove the option of passing it to mmu_init() at runtime (which I already kinda deprecated before). The existing Tegra chipsets that still used it are switched to instead define it in memlayout in a minimally invasive change. This might not be the best way to design this overall (I think we should probably just throw the tables into SRAM like on all other platforms), but I don't have a Tegra system to test so I'd rather keep this change low impact and leave the major redesign for later. Also inlined some single-use one-liner functions in mmu.c that I felt confused things more than they cleared up, and fixed an (apparently harmless?) issue with forgetting to mask out the XN page attribute bit when casting a table descriptor to a pointer. BRANCH=None BUG=None TEST=Compiled Ryu and Smaug. Booted Oak. Change-Id: Iad71f97f5ec4b1fc981dbc8ff1dc88d96c8ee55a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12075 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-11-11armv7: mmu: Make fine grained page tables work across stagesJulius Werner
Among its other restrictions (which are noted in a comment above the function prototype and stay in place), our makeshift fine-grained page table support for ARM32 has the undocumented feature that it relies on a global bookkeeping variable, causing all sorts of fun surprises when you try to use it from multiple stages during the same boot. This patch redesigns the bookkeeping to stay completely inline in the (persistent) TTB which should resolve the issue. (This had not been a problem on any of our platforms for now... I just noticed this because I was trying to solve the same issue on ARM64.) BRANCH=None BUG=None TEST=Booted veyron_jerry. Mapped a second fine-grained memory range from romstage, confirmed that it finds the next free spot and leaves the bootblock table in place. Change-Id: I325866828b4ff251142e1131ce78b571edcc9cf9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12074 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-11mainboard/asus/kgpe-d16: Set correct supported SATA port countTimothy Pearson
Change-Id: Ia5c00f07de81d409e6215cc0944d64d00e47b795 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12401 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-11southbridge/amd/sb700: Disable broken SATA MSI functionalityTimothy Pearson
Change-Id: I4e0a52eb90910604f8640ad7533b5d71be6c8e20 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11983 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11southbridge/amd/sb700: Indicate iSATA/eSATA port typeTimothy Pearson
Change-Id: I8ee757d07c82c151b36def6b709163ff144d244f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11mainboard/asus/kgpe-d16: Properly initialize SB700 SATA PHYsTimothy Pearson
Change-Id: I5323462dcb8a4e84786be38cc85070eb48d4a31d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11982 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-11southbridge/amd/sb700: Add AHCI supportTimothy Pearson
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-11amd/amdmct/mct_ddr3: Improve SPD DIMM detect reliabilityTimothy Pearson
Upon bootup the hardware reads at minimum 256 * 16 bytes (4Kb, or 32KB) over I2C on a system with all DIMM slots populated. If even one of those reads has a single flipped bit in it (due to EMI, cross coupling with another trace, or just poor margins on some cheap DIMM) the system will hang and require a hard reset. In practice I've seen failure rates as high as 1 failed boot in 50 due to this issue, granted with cheap DIMMs, but even so retrying the read resolves the corruption issue. I2C is not designed for continuous data transmission with high reliability, and there is no hardware error checking, therefore a single retry when transferring this amount of data makes sense. Change-Id: Ifab63eca2233c63a6a42ab8b7e742f8e47fb2a09 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11975 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-10[REMOVAL] tyan/s2875Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I36c2b0290f95f4c0f6bed6a7427fb3aab968d4da Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12376 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-10northbridge/amd/amdmct/mct_ddr3: Clean up curly brace style violationsTimothy Pearson
Change-Id: I1ad581454e08f7a24395f50623f29ec14e07f5fb Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12360 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-11-10[REMOVAL] tyan/s4882Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I866440595a0a38b65ce037dc9a1f7e4c02c6beb3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12385 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10[REMOVAL] tyan/s4880Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I41d1f9eac2f4c37bec4d046a68f3f1cf95b51703 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12384 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10[REMOVAL] tyan/s2892Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Idd6011302d2164275fe01954ad3e4e13474ec7a9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12382 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10[REMOVAL] tyan/s2891Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I915d5dd4a095b84023a19c9a0474634320207a08 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10[REMOVAL] tyan/s2885Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Icfdcc5d6043987e22ef9b4db84847d62c91bd305 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10[REMOVAL] tyan/s2882Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Ie44a3c46b82e77028921339c50ae4c176e38055c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12379 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10AMD Bettong: Add a special case for SPD address of rev FZheng Bao
Rev F's SPD address is different from other revision. 0 1 Channel A A0 A2 Channel B A4 AC Change-Id: I620d1f9c295f9a0e30e3821ea36a05dd9f7d3495 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12342 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-10[REMOVAL] tyan/s2895Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I9099f90c073197cc95bb9630788016b7b8221922 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12383 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] tyan/s2880Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Ifd1dfa35ae13ec01d932250994086edebece924d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12377 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-10[REMOVAL] tyan/s2881Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Idfec80ce79c906717e679d6576dc94e71da994c9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12378 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-10[REMOVAL] tyan/s2850Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Ibf3849dcd7a1ef1d8bc5dfc864172a8254a64b6f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12375 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] tyan/s2735Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I460208c18964857be73d9a4449ecfd872ccad98a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12374 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] iwill/dk8s2Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I4a942150590fb69ff97279ff2b48b3be83abafa4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12372 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] digitallogic/adl855pcStefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I5b0fb633b7611e2a69aeb33cd31ca8fd4a83592c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12369 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] drivers/trident/blade3dStefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I180fd548e8f45fc94e5086159c0e3e9465c74598 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12386 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-11-10[REMOVAL] iwill/dk8xStefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I1913ca75aa6f2a2c6b97d49faaabc16afd2799f5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12371 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] newisys/khepriStefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: If0e0a7f69b77cf4bcab4c0dcb58a153485380069 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12373 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-10[REMOVAL] ibm/e325 + ibm/e326Stefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I8854c31f242c13b6f91901452f7eb7ce0ef0b255 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10[REMOVAL] arima/hdamaStefan Reinauer
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: Ic71d8a9137f0bd2a0cc7571a43f9dddb50168d8d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12368 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-11-10Drop SuperIO fintek/f71889Stefan Reinauer
All boards using this SuperIO have been removed from the tree already. Change-Id: I3c43a431d92d76b6ed3ec72b203d3e80925cadea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12247 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10cpu/amd/car: Add romstage BSP stack overrun detectionTimothy Pearson
NOTE: This commit switches CacheBase in CAR to use the DCACHE_RAM_BASE Kconfig variable. There should be no functional difference between the existing code and the new code, however hardware verfication is encouraged on lesser used architectures such as AMD Geode. Change-Id: Ia2e8f99be9df388e492a633c49df21ca1c57ba13 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10northbridge/amd/amdmct: Read SPD data into cache to decrease bootup timeTimothy Pearson
Change-Id: Ic16a927a3f1fc6f7cb1aea36a8abe8cc1999cb52 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11973 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10cpu: Add a way to use microcode .h files back to the buildMartin Roth
The build was changed to remove usage of microcode .h files when all of the .h files were converted to binary. This is still needed for some builds when microcode binaries aren't in the blobs tree. Change-Id: Ia323c90efe8aa0b8799fc5cce6197509e466a105 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12333 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-11-10utils/scripts: Add microcode conversion toolMartin Roth
This is an update to the script in the blobs repo that converts individual or multiple files into a microcode binary. Change-Id: I66fb650bbfa334d1f07e8e3914ef6deb8e72bbb4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12332 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-11-10mainboard/**/irq_tables.c: Remove reference to getpirPatrick Georgi
The obsolete and removed getpir utility remarked in its output that the data is autogenerated. The tool was removed because it wasn't very reliable, so there's no need to point that anymore. Change-Id: I5d624931ba7872b1fefa8fa3c270ae7367e069fa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12354 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-10libpayload/udc: dwc2: Add handler for add_stringsFurquan Shaikh
BUG=b:24676003 BRANCH=None TEST=Compiles successfully. fastboot devices shows serial number for shark. Change-Id: I61d6c168fa458d1f880bc566db997aa5d6398361 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 45b286b318281aea9a4b0362c9259d748b66fd28 Original-Change-Id: Ib9cc22de9daa6c5ec9cde1e62c6f5f768e946069 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310984 Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10libpayload/udc: dwc2: Add timeout for shutdown operationFurquan Shaikh
BUG=b:24676003 BRANCH=None TEST=Verified that udc shutdown returns after the timeout. Change-Id: I5df598c4eddecbecb353343ef5a4e44eae4fc20b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 268913f21adea9969c9f88e3cb759341a60719f0 Original-Change-Id: I3ee059791d6e821f83f9ac41fd7c5385bd60e21e Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310983 Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12347 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-10rockchip/rk3288: hdmi: configure display output mode with EDID informationYakir Yang
'edid->hdmi_monitor_detected' would indicate whether the monitor interface is HDMI or DVI. BRANCH=none BUG=chrome-os-partner:43789 TEST=Previously, my LG monitor couldn't show dev screen. But now I can see dev screen have been posted normally. Change-Id: Id71f051b2cd792712e52bee7a763db383c1962a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 88101589a22d06f0bc25e0750b2862cf66b55391 Original-Change-Id: I157861d327926b834e1e8606b0b676f413491c70 Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/309056 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/12346 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10edid: add hdmi_monitor_detected in data struct edidYakir Yang
HDMI driver need to know whether the monitor is DVI or HDMI interface, so this commit just introduce a new number 'hdmi_monitor_detected' to struct edid. There were four bits to indicate the monitor interfaces, it's better to take use of that. But those bits only existed in EDID 1.4 version, but didn't persented in the previous EDID version, so I decided to detect the hdmi cea block. BRANCH=none BUG=chrome-os-partner:43789 TEST=When mickey connect with HDMI monitor, see 'hdmi_monitor_detected' is 'true'. When mickey connect with DVI monitor, see 'hdmi_monitor_detected' is 'false'. Change-Id: I1a4f1410e1cce1474ffae858db161a18578cac3a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 409f041805d9fdff2d49faa1a3a262cf4dc609c2 Original-Change-Id: Ife770898b0f2b4f58b8259711101a0cab4a5e4ac Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/309055 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/12345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10google/{chell,lars}: Enable Fan control supportdavid
Copy from the CL https://chromium-review.googlesource.com/#/c/307028/ (I40c540dad32beefe249f025b570c347d3ad08c36) BRANCH=None BUG=None TEST=emerge-lars coreboot Change-Id: I131fb729661f0f3bfd198cdf238c627bf38a46a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 70d471c507d12924466979c93742944975a03f27 Original-Change-Id: I0128dc65110ba363185db9c2aca5cdb140c344c2 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310394 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/12344 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-10AMD/Bettong: Set on-board eMMC as SD 2.0zbao
The on-board eMMC is designed as 2.0. If it is set as 3.0, it can not be detected. Change-Id: I9fd913f76535e65c1672924ebdeba3d35dea59cc Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11748 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-10AMD/Bettong: Memory configuration for DDR3 and DDR4Zheng Bao
1. Bettong Rev A-E are DDR3, Bettong Rev F is DDR4. 2. DDR4 uses different memory configuration in AGESA. Pass memory configuration parameters in agesawrapper_amdinitpost. 3. Tested on Rev C and Rev F. Both of them can boot to Windows 8 and have the correct memory size. Change-Id: Ia0d35ebf1b65c399abc3777ee6bdb107437a4345 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11733 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-10AMD/Bettong: add function to read board versionZheng Bao
Bettong uses 3 GPIO(5-7) pins to identify board. The GPIO ports are mapped to MMIO space. The GPIO value and board version are mapped as follow: GPIO5 GPIO6 GPIO7 Version 0 0 0 A 0 0 1 B ...... 1 1 1 H Change-Id: I72df28043057d8c4ccc4a2e645011ca5379e9928 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/11732 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-10asus/kgpe-d16: fix DIMMSetVoltagesFelix Held
The RAM voltages can be set per socket, which contains two nodes. Only reset the allowed voltages per socket before processing a new socket and not after every node. Change-Id: Ia0e47676c7a3eebd56a17ab6de0e9690bf8cf703 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/12297 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-11-10sunw/ultra40m2: initialize hardware monitor and fan controlJonathan A. Kollasch
Change-Id: I3fbb897feb68d899e5dec075a09d0dd605eca5ce Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/12309 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-11-10mainboard: Add Sun Ultra 40 M2 portJonathan A. Kollasch
The Ultra 40 M2 is a dual Socket F workstation with MCP55/IO55 chipset, DME1737 superio and onboard Firewire. This board port is for family 0Fh (K8) processors. Due to existing bugs, having memory on the second node will cause raminit to fail. Change-Id: I5b62ade908ffeb80e22f14edbe4c1ec04880bd30 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/12304 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-10mainboard: copy nvidia/l1_2pvv to sunw/ultra40m2 and renameJonathan A. Kollasch
Change-Id: Ia275a697caa73168553b5d588d54df651e0539d7 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/12303 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10Provide coreboot coding style formalisation file for clang-formatEdward O'Callaghan
The Clang project has a powerful code rewrite engine in the form of LibFormat. A auxiliary tool is provided called `clang-format' that can take a coding style formalisation file and rewrite your code to conform to this style. Further, a wrapper script called `git-clang-format' is also provided that can hook pre-commits potentially replacing our slow and poor coverage regexp scripts on pre-commits. Herein we provide essentially the Linux Style Guide formalism. Change-Id: Ica2207fdb8a4702793fa73eba6293b7b36ea9050 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8036 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10mainboard/lenovo/t400: Add initial hybrid graphics supportTimothy Pearson
TEST: Booted T400 with Intel/ATI hybrid graphics in integrated mode with native Intel graphics init and verified integrated panel framebuffer functionality in SeaBIOS and Linux. Change-Id: I37e72c5dad0d7ab3915cc3d439ae9a4a9b3787e3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9319 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-11-10asus/k8v-x: set superio ROM ctrl reg to enable writesUrja Rannikko
This is required for flashrom to work... Change-Id: Icc0a52e0ca103c897d96fa8f3cf83b30780c7b49 Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-on: http://review.coreboot.org/12349 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10amd/model_fxx: fix code style in FID&VID support checkUrja Rannikko
This is in AP code, fixed in preparation for copying the same check to BSP. Change-Id: I0750919d9fdb3d4e6666221ad82097e0c479cf14 Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-on: http://review.coreboot.org/12359 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-11-10mainboard: Remove empty mainboard.c filesPaul Menzel
All the deleted mainboard files contain no code besides some print statements denoting, that the init is executed. If such statements are desired, this should be done in common code so it does not have to be added to each mainboard. Therefore, also delete files with just print statements. Change-Id: I379e4b1e1b1725648c6231bc6954ac3cc655a596 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/12355 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-10mainboard/intel: Add Stargo2Marc Jones
The Intel Stargo2 is a communications device reference design. This mainboard uses the Sandy/Ivy Bridge and is paired with the i89xx southbridge. The FSP package is available from Intel: https://intel.com/fsp. Change-Id: I75c527f0eb0de1ee6ac13d8d276d7cf23b5b120c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12170 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-10cpu/intel: Add socket BGA1284Marc Jones
Add an additional Sandy(Ivy)bridge processor socket. Change-Id: I7eff7183d0c003e61fdda5350579f4d3dec7504d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12168 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: York Yang <york.yang@intel.com>
2015-11-10superio/intel: Add i8900 deviceMarc Jones
The Intel i8900 Super I/O is similar to the previously supported i3100. Change-Id: I9a5b651cab35991c3c3e09fc4668d35ca2d221ba Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12169 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: York Yang <york.yang@intel.com>
2015-11-10northbridge/intel: Add i89xx header fileMarc Jones
The Intel northbridge must be paired with a southbridge. Add the ii89xx southbridge header based on the config setting. Change-Id: Ied708006310efaba31afe6977ab7e57fe4e5ceec Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12167 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-11-10southbridge/intel: Add FSP based i89xx southbridge supportMarc Jones
The Intel i89xx is a communications chipset that pairs with Sandy(Ivy)bridge processors. It has a lot in common with the bd82x6x chipset, but fewer devices and options. Change-Id: I11bcd1edc80f72a1b2521def9be0d1bde5789a79 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/12166 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>