diff options
Diffstat (limited to 'util')
-rw-r--r-- | util/superiotool/ali.c | 5 | ||||
-rw-r--r-- | util/superiotool/fintek.c | 7 | ||||
-rw-r--r-- | util/superiotool/ite.c | 8 | ||||
-rw-r--r-- | util/superiotool/nsc.c | 64 | ||||
-rw-r--r-- | util/superiotool/smsc.c | 9 | ||||
-rw-r--r-- | util/superiotool/superiotool.c | 12 | ||||
-rw-r--r-- | util/superiotool/superiotool.h | 8 | ||||
-rw-r--r-- | util/superiotool/winbond.c | 8 |
8 files changed, 76 insertions, 45 deletions
diff --git a/util/superiotool/ali.c b/util/superiotool/ali.c index 99dd00f694..e8bf36c577 100644 --- a/util/superiotool/ali.c +++ b/util/superiotool/ali.c @@ -72,6 +72,8 @@ void probe_idregs_ali(uint16_t port) uint16_t id; uint8_t rev; + probing_for("ALi", "", port); + enter_conf_mode_ali(port); id = regval(port, DEVICE_ID_BYTE1_REG) << 8; @@ -79,7 +81,8 @@ void probe_idregs_ali(uint16_t port) rev = regval(port, DEVICE_REV_REG); if (superio_unknown(reg_table, id)) { - no_superio_found("ALi", "", port); + if (verbose) + printf(NOTFOUND "id=0x%04x, rev=0x%02x\n", id, rev); exit_conf_mode_ali(port); return; } diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c index 757d01c020..2fe8cb3747 100644 --- a/util/superiotool/fintek.c +++ b/util/superiotool/fintek.c @@ -136,6 +136,8 @@ void probe_idregs_fintek(uint16_t port) { uint16_t vid, did; + probing_for("Fintek", "", port); + enter_conf_mode_winbond_fintek_ite_8787(port); did = regval(port, DEVICE_ID_BYTE1_REG); @@ -145,12 +147,13 @@ void probe_idregs_fintek(uint16_t port) vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8); if (vid != FINTEK_VENDOR_ID || superio_unknown(reg_table, did)) { - no_superio_found("Fintek", "", port); + if (verbose) + printf(NOTFOUND "vid=0x%04x, id=0x%04x\n", vid, did); exit_conf_mode_winbond_fintek_ite_8787(port); return; } - printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at port=0x%x\n", + printf("Found Fintek %s (vid=0x%04x, id=0x%04x) at 0x%x\n", get_superio_name(reg_table, did), vid, did, port); dump_superio("Fintek", reg_table, port, did); diff --git a/util/superiotool/ite.c b/util/superiotool/ite.c index e44460c065..4d3537f7d1 100644 --- a/util/superiotool/ite.c +++ b/util/superiotool/ite.c @@ -23,6 +23,7 @@ #define CHIP_ID_BYTE1_REG 0x20 #define CHIP_ID_BYTE2_REG 0x21 + #define CHIP_VERSION_REG 0x22 /* Note: IT8726F has ID 0x8726 (datasheet wrongly says 0x8716). */ @@ -265,17 +266,20 @@ static void probe_idregs_ite_helper(const char *init, uint16_t port) { uint16_t id, chipver; + probing_for("ITE", init, port); + id = regval(port, CHIP_ID_BYTE1_REG) << 8; id |= regval(port, CHIP_ID_BYTE2_REG); chipver = regval(port, CHIP_VERSION_REG) & 0x0f; /* Only bits 3..0 */ if (superio_unknown(reg_table, id)) { - no_superio_found("ITE", init, port); + if (verbose) + printf(NOTFOUND "id=0x%04x, rev=0x%01x\n", id, chipver); exit_conf_mode_ite(port); return; } - printf("Found ITE %s (id=0x%04x, rev=0x%01x) at port=0x%x\n", + printf("Found ITE %s (id=0x%04x, rev=0x%01x) at 0x%x\n", get_superio_name(reg_table, id), id, chipver, port); dump_superio("ITE", reg_table, port, id); diff --git a/util/superiotool/nsc.c b/util/superiotool/nsc.c index 0b58642a40..5bc9e9f463 100644 --- a/util/superiotool/nsc.c +++ b/util/superiotool/nsc.c @@ -2,6 +2,7 @@ * This file is part of the superiotool project. * * Copyright (C) 2006 Ronald Minnich <rminnich@gmail.com> + * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,16 +21,23 @@ #include "superiotool.h" -/* Well, they really thought this through, eh? Family is 8 bits! */ -static const char *familyid[] = { - [0xf1] = "PC8374 (Winbond/NatSemi)" +#define CHIP_ID_REG 0x20 /* Super I/O ID (SID) / family */ +#define CHIP_REV_REG 0x27 /* Super I/O revision ID (SRID) */ + +/* SID[7..0]: chip family. SRID[7..5]: chip ID, SRID[4..0]: chip rev. */ +const static struct superio_registers reg_table[] = { + {0xf1, "PC8374L", { + {EOT}}}, + {EOT} }; -static void dump_readable_ns8374(uint16_t port) +static void dump_readable_pc8374l(uint16_t port) { if (!dump_readable) return; + printf("Human-readable register dump:\n"); + printf("Enables: 21=%02x, 22=%02x, 23=%02x, 24=%02x, 26=%02x\n", regval(port, 0x21), regval(port, 0x22), regval(port, 0x23), regval(port, 0x24), regval(port, 0x26)); @@ -59,34 +67,40 @@ static void dump_readable_ns8374(uint16_t port) regval(port, 0xf0)); } -void probe_idregs_simple(uint16_t port) +void probe_idregs_nsc(uint16_t port) { - uint16_t id; + uint8_t id, rev; - outb(0x20, port); - if (inb(port) != 0x20) { - no_superio_found("NSC", "", port); - /* TODO: Exit config mode? */ + probing_for("NSC", "", port); + + outb(CHIP_ID_REG, port); + if (inb(port) != CHIP_ID_REG) { + if (verbose) + printf(NOTFOUND "port=0x%02x, port+1=0x%02x\n", + inb(port), inb(port + 1)); return; } id = inb(port + 1); - printf("Super I/O found at 0x%02x: id = 0x%02x\n", port, id); - if (id == 0xff) - return; + outb(CHIP_REV_REG, port); + if (inb(port) != CHIP_REV_REG) { + printf("Warning: Can't get chip revision. Setting to 0xff.\n"); + rev = 0xff; + } else { + rev = inb(port + 1); + } - if (familyid[id]) - printf("%s\n", familyid[id]); - else - printf("<unknown>\n"); - - switch (id) { - case 0xf1: - dump_readable_ns8374(port); - break; - default: - printf("No dump for 0x%02x\n", id); - break; + if (superio_unknown(reg_table, id)) { + if (verbose) + printf(NOTFOUND "sid=0x%02x, srid=0x%02x\n", id, rev); + return; } + + printf("Found NSC %s (sid=0x%02x, srid=0x%02x) at 0x%x\n", + get_superio_name(reg_table, id), id, rev, port); + + dump_superio("NSC", reg_table, port, id); + if (id == 0xf1) + dump_readable_pc8374l(port); } diff --git a/util/superiotool/smsc.c b/util/superiotool/smsc.c index a6f2749710..6103d9f228 100644 --- a/util/superiotool/smsc.c +++ b/util/superiotool/smsc.c @@ -133,6 +133,10 @@ static void probe_idregs_smsc_helper(uint16_t port, uint8_t idreg, uint8_t revreg) { uint8_t id, rev; + const char *info = (idreg == 0x20) ? "(idregs=0x20/0x21) " + : "(idregs=0x0d/0x0e) "; + + probing_for("SMSC", info, port); enter_conf_mode_smsc(port); @@ -140,12 +144,13 @@ static void probe_idregs_smsc_helper(uint16_t port, uint8_t idreg, rev = regval(port, revreg); if (superio_unknown(reg_table, id)) { - no_superio_found("SMSC", "", port); + if (verbose) + printf(NOTFOUND "id=0x%02x, rev=0x%02x\n", id, rev); exit_conf_mode_smsc(port); return; } - printf("Found %s %s (id=0x%02x, rev=0x%02x) at port=0x%x\n", + printf("Found %s %s (id=0x%02x, rev=0x%02x) at 0x%x\n", (id == 0x77 ? "ASUS" : "SMSC"), get_superio_name(reg_table, id), id, rev, port); diff --git a/util/superiotool/superiotool.c b/util/superiotool/superiotool.c index d9d2bb8192..6771996091 100644 --- a/util/superiotool/superiotool.c +++ b/util/superiotool/superiotool.c @@ -155,18 +155,14 @@ void dump_superio_readable(uint16_t port) printf("No human-readable dump available for this Super I/O\n"); } -void no_superio_found(const char *vendor, const char *info, uint16_t port) +void probing_for(const char *vendor, const char *info, uint16_t port) { if (!verbose) return; - if (inb(port) == 0xff) - /* Yes, there's no space between '%s' and 'at'! */ - printf("Probing for %s Super I/O %sat 0x%x... failed\n", - vendor, info, port); - else - printf("Probing 0x%x, failed (0x%02x), data returns 0x%02x\n", - port, inb(port), inb(port + 1)); + /* Yes, there's no space between '%s' and 'at'! */ + printf("Probing for %s Super I/O %sat 0x%x...\n", + vendor, info, port); } static void print_version(void) diff --git a/util/superiotool/superiotool.h b/util/superiotool/superiotool.h index 9c9e55a238..a3dab52ccb 100644 --- a/util/superiotool/superiotool.h +++ b/util/superiotool/superiotool.h @@ -40,6 +40,8 @@ Per default (no options) superiotool will just probe for a Super I/O\n\ and print its vendor, name, ID, revision, and config port.\n" +#define NOTFOUND " Failed. Returned data: " + #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) #define EOT -1 /* End Of Table */ @@ -79,7 +81,7 @@ const char *get_superio_name(const struct superio_registers reg_table[], void dump_superio(const char *name, const struct superio_registers reg_table[], uint16_t port, uint16_t id); void dump_superio_readable(uint16_t port); -void no_superio_found(const char *vendor, const char *info, uint16_t port); +void probing_for(const char *vendor, const char *info, uint16_t port); /* ali.c */ void probe_idregs_ali(uint16_t port); @@ -91,7 +93,7 @@ void probe_idregs_fintek(uint16_t port); void probe_idregs_ite(uint16_t port); /* nsc.c */ -void probe_idregs_simple(uint16_t port); +void probe_idregs_nsc(uint16_t port); /* smsc.c */ void probe_idregs_smsc(uint16_t port); @@ -105,7 +107,7 @@ const static struct { int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */ } superio_ports_table[] = { {probe_idregs_ali, {0x3f0, 0x370, EOT}}, - {probe_idregs_simple, {0x2e, 0x4e, EOT}}, + {probe_idregs_nsc, {0x2e, 0x4e, EOT}}, {probe_idregs_fintek, {0x2e, 0x4e, EOT}}, {probe_idregs_ite, {0x2e, 0x4e, EOT}}, {probe_idregs_smsc, {0x2e, 0x4e, 0x3f0, 0x370, EOT}}, diff --git a/util/superiotool/winbond.c b/util/superiotool/winbond.c index f45acb7873..23f9fdcf47 100644 --- a/util/superiotool/winbond.c +++ b/util/superiotool/winbond.c @@ -184,9 +184,11 @@ void probe_idregs_winbond_helper(const char *init, uint16_t port) uint16_t id; uint8_t devid, rev, olddevid; + probing_for("Winbond", init, port); + devid = regval(port, DEVICE_ID_REG); rev = regval(port, DEVICE_REV_REG); - olddevid = regval(port, DEVICE_ID_REG_OLD); + olddevid = regval(port, DEVICE_ID_REG_OLD) & 0x0f; if (devid == 0x52) id = devid; /* ID only */ @@ -199,7 +201,9 @@ void probe_idregs_winbond_helper(const char *init, uint16_t port) id = olddevid & 0x0f; /* ID[3..0] */ if (superio_unknown(reg_table, id)) { - no_superio_found("Winbond", init, port); + if (verbose) + printf(NOTFOUND "id/oldid=0x%02x/0x%02x, rev=0x%02x\n", + devid, olddevid, rev); exit_conf_mode_winbond_fintek_ite_8787(port); return; } |