summaryrefslogtreecommitdiff
path: root/util
diff options
context:
space:
mode:
Diffstat (limited to 'util')
-rw-r--r--util/flashrom/board_enable.c76
-rw-r--r--util/flashrom/chipset_enable.c141
-rw-r--r--util/flashrom/flash.h45
3 files changed, 122 insertions, 140 deletions
diff --git a/util/flashrom/board_enable.c b/util/flashrom/board_enable.c
index 13c4f1f5e3..2610a53532 100644
--- a/util/flashrom/board_enable.c
+++ b/util/flashrom/board_enable.c
@@ -50,13 +50,13 @@ static void w836xx_ext_leave(uint16_t port)
static unsigned char wbsio_read(uint16_t index, uint8_t reg)
{
outb(reg, index);
- return inb(index+1);
+ return inb(index + 1);
}
static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
{
outb(reg, index);
- outb(data, index+1);
+ outb(data, index + 1);
}
static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
@@ -64,8 +64,8 @@ static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
uint8_t tmp;
outb(reg, index);
- tmp = inb(index+1) & ~mask;
- outb(tmp | (data & mask), index+1);
+ tmp = inb(index + 1) & ~mask;
+ outb(tmp | (data & mask), index + 1);
}
/**
@@ -79,8 +79,8 @@ static int w83627hf_gpio24_raise(uint16_t index, const char *name)
{
w836xx_ext_enter(index);
- /* Is this the w83627hf? */
- if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */
+ /* Is this the W83627HF? */
+ if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
@@ -90,14 +90,12 @@ static int w83627hf_gpio24_raise(uint16_t index, const char *name)
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
wbsio_mask(index, 0x2B, 0x10, 0x10);
- wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */
+ /* Select logical device 8: GPIO port 2 */
+ wbsio_write(index, 0x07, 0x08);
wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
-
wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
-
wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
-
wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
w836xx_ext_leave(index);
@@ -107,6 +105,7 @@ static int w83627hf_gpio24_raise(uint16_t index, const char *name)
static int w83627hf_gpio24_raise_2e(const char *name)
{
+ /* TODO: Typo? Shouldn't this be 0x2e? */
return w83627hf_gpio24_raise(0x2d, name);
}
@@ -119,8 +118,9 @@ static int w83627hf_gpio24_raise_2e(const char *name)
static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
{
w836xx_ext_enter(index);
- /* Is this the w83627thf? */
- if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */
+
+ /* Is this the W83627THF? */
+ if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
@@ -129,15 +129,11 @@ static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
- wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */
-
- wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
-
- wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
-
- wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
-
- wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
+ wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
+ wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
+ wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
+ wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
+ wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
w836xx_ext_leave(index);
@@ -146,8 +142,9 @@ static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
static int w83627thf_gpio4_4_raise_4e(const char *name)
{
- return w83627thf_gpio4_4_raise(0x4E, name);
+ return w83627thf_gpio4_4_raise(0x4e, name);
}
+
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
@@ -156,7 +153,7 @@ static int w83627thf_gpio4_4_raise_4e(const char *name)
static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
- unsigned int base;
+ uint16_t base;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
@@ -173,7 +170,7 @@ static int board_via_epia_m(const char *name)
/* Get Power Management IO address. */
base = pci_read_word(dev, 0x88) & 0xFF80;
- /* enable GPIO15 which is connected to write protect. */
+ /* Enable GPIO15 which is connected to write protect. */
val = inb(base + 0x4D);
val |= 0x80;
outb(val, base + 0x4D);
@@ -199,16 +196,16 @@ static int board_asus_a7v8x_mx(const char *name)
return -1;
}
- /* This bit is marked reserved actually */
+ /* This bit is marked reserved actually. */
val = pci_read_byte(dev, 0x59);
val &= 0x7F;
pci_write_byte(dev, 0x59, val);
- /* Raise ROM MEMW# line on Winbond w83697 SuperIO */
+ /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
w836xx_ext_enter(0x2E);
- if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */
- wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */
+ if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */
+ wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */
w836xx_ext_leave(0x2E);
@@ -323,7 +320,7 @@ static int board_epox_ep_bx3(const char *name)
}
/**
- * Suited for Acorp 6A815EPD
+ * Suited for Acorp 6A815EPD.
*/
static int board_acorp_6a815epd(const char *name)
{
@@ -338,7 +335,7 @@ static int board_acorp_6a815epd(const char *name)
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
- port = (pci_read_word(dev, 0x58) & 0xFF80) + 0xE;
+ port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE;
val = inb(port);
val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
@@ -357,25 +354,25 @@ static int board_acorp_6a815epd(const char *name)
* Keep the second set NULLed if it should be ignored.
*/
struct board_pciid_enable {
- /* Any device, but make it sensible, like the isa bridge. */
+ /* Any device, but make it sensible, like the ISA bridge. */
uint16_t first_vendor;
uint16_t first_device;
uint16_t first_card_vendor;
uint16_t first_card_device;
/* Any device, but make it sensible, like
- * the host bridge. May be NULL
+ * the host bridge. May be NULL.
*/
uint16_t second_vendor;
uint16_t second_device;
uint16_t second_card_vendor;
uint16_t second_card_device;
- /* From linuxbios table */
- char *lb_vendor;
- char *lb_part;
+ /* The vendor / part name from the LinuxBIOS table. */
+ const char *lb_vendor;
+ const char *lb_part;
- char *name;
+ const char *name;
int (*enable) (const char *name);
};
@@ -411,8 +408,7 @@ struct board_pciid_enable board_pciid_enables[] = {
* Match boards on LinuxBIOS table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
-static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
- char *part)
+static struct board_pciid_enable *board_match_linuxbios_name(const char *vendor, const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
@@ -431,7 +427,9 @@ static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
continue;
return board;
}
+
printf("NOT FOUND %s:%s\n", vendor, part);
+
return NULL;
}
@@ -472,7 +470,7 @@ static struct board_pciid_enable *board_match_pci_card_ids(void)
return NULL;
}
-int board_flash_enable(char *vendor, char *part)
+int board_flash_enable(const char *vendor, const char *part)
{
struct board_pciid_enable *board = NULL;
int ret = 0;
diff --git a/util/flashrom/chipset_enable.c b/util/flashrom/chipset_enable.c
index 87929f58f4..7eecf09824 100644
--- a/util/flashrom/chipset_enable.c
+++ b/util/flashrom/chipset_enable.c
@@ -34,12 +34,14 @@
#include <unistd.h>
#include "flash.h"
-static int enable_flash_ali_m1533(struct pci_dev *dev, char *name)
+static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
- /* ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
- 0xFFFE0000-0xFFFFFFFF ROM select enable. */
+ /*
+ * ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
+ * 0xFFFE0000-0xFFFFFFFF ROM select enable.
+ */
tmp = pci_read_byte(dev, 0x47);
tmp |= 0x46;
pci_write_byte(dev, 0x47, tmp);
@@ -47,24 +49,28 @@ static int enable_flash_ali_m1533(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_sis630(struct pci_dev *dev, char *name)
+static int enable_flash_sis630(struct pci_dev *dev, const char *name)
{
- char b;
+ uint8_t b;
- /* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630 */
+ /* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630. */
b = pci_read_byte(dev, 0x40);
pci_write_byte(dev, 0x40, b | 0xb);
- /* Flash write enable on SiS 540/630 */
+
+ /* Flash write enable on SiS 540/630. */
b = pci_read_byte(dev, 0x45);
pci_write_byte(dev, 0x45, b | 0x40);
- /* The same thing on SiS 950 SuperIO side */
+ /* The same thing on SiS 950 Super I/O side... */
+
+ /* First probe for Super I/O on config port 0x2e. */
outb(0x87, 0x2e);
outb(0x01, 0x2e);
outb(0x55, 0x2e);
outb(0x55, 0x2e);
if (inb(0x2f) != 0x87) {
+ /* If that failed, try config port 0x4e. */
outb(0x87, 0x4e);
outb(0x01, 0x4e);
outb(0x55, 0x4e);
@@ -99,7 +105,7 @@ static int enable_flash_sis630(struct pci_dev *dev, char *name)
* - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
* - Order Number: 290562-001
*/
-static int enable_flash_piix4(struct pci_dev *dev, char *name)
+static int enable_flash_piix4(struct pci_dev *dev, const char *name)
{
uint16_t old, new;
uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */
@@ -132,23 +138,19 @@ static int enable_flash_piix4(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_ich(struct pci_dev *dev, char *name, int bios_cntl)
+/*
+ * See ie. page 375 of "Intel ICH7 External Design Specification"
+ * http://download.intel.com/design/chipsets/datashts/30701302.pdf
+ */
+static int enable_flash_ich(struct pci_dev *dev, const char *name,
+ int bios_cntl)
{
- /* register 4e.b gets or'ed with one */
uint8_t old, new;
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- /* Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
+ /*
+ * Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
* just treating it as 8 bit wide seems to work fine in practice.
*/
-
- /* see ie. page 375 of "Intel ICH7 External Design Specification"
- * http://download.intel.com/design/chipsets/datashts/30701302.pdf
- */
-
old = pci_read_byte(dev, bios_cntl);
new = old | 1;
@@ -166,17 +168,17 @@ static int enable_flash_ich(struct pci_dev *dev, char *name, int bios_cntl)
return 0;
}
-static int enable_flash_ich_4e(struct pci_dev *dev, char *name)
+static int enable_flash_ich_4e(struct pci_dev *dev, const char *name)
{
return enable_flash_ich(dev, name, 0x4e);
}
-static int enable_flash_ich_dc(struct pci_dev *dev, char *name)
+static int enable_flash_ich_dc(struct pci_dev *dev, const char *name)
{
return enable_flash_ich(dev, name, 0xdc);
}
-static int enable_flash_vt823x(struct pci_dev *dev, char *name)
+static int enable_flash_vt823x(struct pci_dev *dev, const char *name)
{
uint8_t val;
@@ -194,7 +196,7 @@ static int enable_flash_vt823x(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_cs5530(struct pci_dev *dev, char *name)
+static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
{
uint8_t reg8;
@@ -224,7 +226,7 @@ static int enable_flash_cs5530(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_cs5536(struct pci_dev *dev, char *name)
+static int enable_flash_cs5536(struct pci_dev *dev, const char *name)
{
int fd_msr;
unsigned char buf[8];
@@ -233,15 +235,15 @@ static int enable_flash_cs5536(struct pci_dev *dev, char *name)
/* Geode systems write protect the BIOS via RCONFs (cache
* settings similar to MTRRs). To unlock, change MSR 0x1808
* top byte to 0x22. Reading and writing to msr, however
- * requires instrucitons rdmsr/wrmsr, which are ring0 privileged
+ * requires instructions rdmsr/wrmsr, which are ring0 privileged
* instructions so only the kernel can do the read/write. This
* function, therefore, requires that the msr kernel module be
* loaded to access these instructions from user space using
* device /dev/cpu/0/msr. This hard-coded driver location
* could have potential problems on SMP machines since it
- * assumes cpu0, but it is safe on the geode which is not SMP.
+ * assumes cpu0, but it is safe on the Geode which is not SMP.
*
- * This is probably not portable beyond linux.
+ * This is probably not portable beyond Linux.
*/
fd_msr = open("/dev/cpu/0/msr", O_RDONLY);
@@ -272,7 +274,7 @@ static int enable_flash_cs5536(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_sc1100(struct pci_dev *dev, char *name)
+static int enable_flash_sc1100(struct pci_dev *dev, const char *name)
{
uint8_t new;
@@ -288,16 +290,14 @@ static int enable_flash_sc1100(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_sis5595(struct pci_dev *dev, char *name)
+static int enable_flash_sis5595(struct pci_dev *dev, const char *name)
{
uint8_t new, newer;
new = pci_read_byte(dev, 0x45);
- /* clear bit 5 */
- new &= (~0x20);
- /* set bit 2 */
- new |= 0x4;
+ new &= (~0x20); /* Clear bit 5. */
+ new |= 0x4; /* Set bit 2. */
pci_write_byte(dev, 0x45, new);
@@ -311,16 +311,11 @@ static int enable_flash_sis5595(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_amd8111(struct pci_dev *dev, char *name)
+static int enable_flash_amd8111(struct pci_dev *dev, const char *name)
{
- /* register 4e.b gets or'ed with one */
uint8_t old, new;
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- /* enable decoding at 0xffb00000 to 0xffffffff */
+ /* Enable decoding at 0xffb00000 to 0xffffffff. */
old = pci_read_byte(dev, 0x43);
new = old | 0xC0;
if (new != old) {
@@ -344,17 +339,10 @@ static int enable_flash_amd8111(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_ck804(struct pci_dev *dev, char *name)
+static int enable_flash_ck804(struct pci_dev *dev, const char *name)
{
- /* register 4e.b gets or'ed with one */
uint8_t old, new;
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
-
- /* dump_pci_device(dev); */
-
old = pci_read_byte(dev, 0x88);
new = old | 0xc0;
if (new != old) {
@@ -378,14 +366,14 @@ static int enable_flash_ck804(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_sb400(struct pci_dev *dev, char *name)
+/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
+static int enable_flash_sb400(struct pci_dev *dev, const char *name)
{
uint8_t tmp;
-
struct pci_filter f;
struct pci_dev *smbusdev;
- /* then look for the smbus device */
+ /* Look for the SMBus device. */
pci_filter_init((struct pci_access *)0, &f);
f.vendor = 0x1002;
f.device = 0x4372;
@@ -397,21 +385,21 @@ static int enable_flash_sb400(struct pci_dev *dev, char *name)
}
if (!smbusdev) {
- fprintf(stderr, "ERROR: SMBus device not found. aborting\n");
+ fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n");
exit(1);
}
- /* enable some smbus stuff */
+ /* Enable some SMBus stuff. */
tmp = pci_read_byte(smbusdev, 0x79);
tmp |= 0x01;
pci_write_byte(smbusdev, 0x79, tmp);
- /* change southbridge */
+ /* Change southbridge. */
tmp = pci_read_byte(dev, 0x48);
tmp |= 0x21;
pci_write_byte(dev, 0x48, tmp);
- /* now become a bit silly. */
+ /* Now become a bit silly. */
tmp = inb(0xc6f);
outb(tmp, 0xeb);
outb(tmp, 0xeb);
@@ -423,19 +411,12 @@ static int enable_flash_sb400(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_mcp55(struct pci_dev *dev, char *name)
+static int enable_flash_mcp55(struct pci_dev *dev, const char *name)
{
- /* register 4e.b gets or'ed with one */
- unsigned char old, new, byte;
- unsigned short word;
-
- /* if it fails, it fails. There are so many variations of broken mobos
- * that it is hard to argue that we should quit at this point.
- */
+ uint8_t old, new, byte;
+ uint16_t word;
- /* dump_pci_device(dev); */
-
- /* Set the 0-16 MB enable bits */
+ /* Set the 0-16 MB enable bits. */
byte = pci_read_byte(dev, 0x88);
byte |= 0xff; /* 256K */
pci_write_byte(dev, 0x88, byte);
@@ -462,7 +443,7 @@ static int enable_flash_mcp55(struct pci_dev *dev, char *name)
return 0;
}
-static int enable_flash_ht1000(struct pci_dev *dev, char *name)
+static int enable_flash_ht1000(struct pci_dev *dev, const char *name)
{
uint8_t byte;
@@ -479,12 +460,12 @@ static int enable_flash_ht1000(struct pci_dev *dev, char *name)
}
typedef struct penable {
- unsigned short vendor, device;
- char *name;
- int (*doit) (struct pci_dev * dev, char *name);
+ uint16_t vendor, device;
+ const char *name;
+ int (*doit) (struct pci_dev *dev, const char *name);
} FLASH_ENABLE;
-static FLASH_ENABLE enables[] = {
+static const FLASH_ENABLE enables[] = {
{0x1039, 0x0630, "SIS630", enable_flash_sis630},
{0x8086, 0x7110, "PIIX4/PIIX4E/PIIX4M", enable_flash_piix4},
{0x8086, 0x7198, "Intel 440MX", enable_flash_piix4},
@@ -517,17 +498,14 @@ static FLASH_ENABLE enables[] = {
{0x1022, 0x2080, "AMD GEODE CS5536", enable_flash_cs5536},
{0x1022, 0x7468, "AMD8111", enable_flash_amd8111},
{0x10B9, 0x1533, "ALi M1533", enable_flash_ali_m1533},
- /* this fallthrough looks broken. */
{0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804}, /* LPC */
{0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804}, /* Pro */
{0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804}, /* Slave, should not be here, to fix known bug for A01. */
-
{0x10de, 0x0260, "NVidia MCP51", enable_flash_ck804},
{0x10de, 0x0261, "NVidia MCP51", enable_flash_ck804},
{0x10de, 0x0262, "NVidia MCP51", enable_flash_ck804},
{0x10de, 0x0263, "NVidia MCP51", enable_flash_ck804},
-
- {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, /* Gigabyte m57sli-s4 */
+ {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, /* M57SLI-S4 */
{0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
@@ -535,19 +513,18 @@ static FLASH_ENABLE enables[] = {
{0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */
{0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55}, /* Pro */
-
- {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
-
+ {0x1002, 0x4377, "ATI SB400", enable_flash_sb400},
{0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
};
int chipset_flash_enable(void)
{
struct pci_dev *dev = 0;
- int ret = -2; /* nothing! */
+ int ret = -2; /* Nothing! */
int i;
- /* now let's try to find the chipset we have ... */
+ /* Now let's try to find the chipset we have... */
+ /* TODO: Use ARRAY_SIZE. */
for (i = 0; i < sizeof(enables) / sizeof(enables[0]); i++) {
dev = pci_dev_find(enables[i].vendor, enables[i].device);
if (dev)
diff --git a/util/flashrom/flash.h b/util/flashrom/flash.h
index 898977f0e7..db3e0d6e97 100644
--- a/util/flashrom/flash.h
+++ b/util/flashrom/flash.h
@@ -31,7 +31,7 @@
#include <stdio.h>
struct flashchip {
- char *name;
+ const char *name;
int manufacture_id;
int model_id;
@@ -43,18 +43,18 @@ struct flashchip {
int (*write) (struct flashchip *flash, uint8_t *buf);
int (*read) (struct flashchip *flash, uint8_t *buf);
- /* some flash devices have an additional
- * register space
- */
+ /* Some flash devices have an additional register space. */
volatile uint8_t *virtual_memory;
volatile uint8_t *virtual_registers;
};
extern struct flashchip flashchips[];
-/* Please keep this list sorted alphabetically by manufacturer. The first
+/*
+ * Please keep this list sorted alphabetically by manufacturer. The first
* entry of each section should be the manufacturer ID, followed by the
* list of devices from that manufacturer (sorted by device IDs).
+ *
* All LPC/FWH parts (parallel flash) have 8-bit device IDs.
* All SPI parts have 16-bit device IDs.
*/
@@ -80,9 +80,11 @@ extern struct flashchip flashchips[];
#define EMST_ID 0x8C /* EMST / EFST */
#define EMST_F49B002UA 0x00
+/*
+ * EN25 chips are SPI, first byte of device ID is memory type,
+ * second byte of device ID is log(bitsize)-9.
+ */
#define EON_ID 0x1C /* EON */
-/* EN25 chips are SPI, first byte of device id is memory type,
- * second byte of device id is log(bitsize)-9. */
#define EN_25B05 0x2010 /* 2^19 kbit or 2^16 kByte */
#define EN_25B10 0x2011
#define EN_25B20 0x2012
@@ -103,13 +105,15 @@ extern struct flashchip flashchips[];
#define ISSI_ID 0xD5 /* ISSI */
#define MSYSTEMS_ID 0x156F /* M-Systems */
-#define MSYSTEMS_MD2200 0xDB /* ? */
+#define MSYSTEMS_MD2200 0xDB
#define MSYSTEMS_MD2800 0x30 /* hmm -- both 0x30 */
#define MSYSTEMS_MD2802 0x30 /* hmm -- both 0x30 */
+/*
+ * MX25 chips are SPI, first byte of device ID is memory type,
+ * second byte of device ID is log(bitsize)-9.
+ */
#define MX_ID 0xC2 /* Macronix (MX) */
-/* MX25 chips are SPI, first byte of device id is memory type,
- * second byte of device id is log(bitsize)-9. */
#define MX_25L512 0x2010 /* 2^19 kbit or 2^16 kByte */
#define MX_25L1005 0x2011
#define MX_25L2005 0x2012
@@ -129,9 +133,11 @@ extern struct flashchip flashchips[];
#define SHARP_ID 0xB0 /* Sharp */
#define SHARP_LHF00L04 0xCF
+/*
+ * SST25 chips are SPI, first byte of device ID is memory type, second
+ * byte of device ID is related to log(bitsize) at least for some chips.
+ */
#define SST_ID 0xBF /* SST */
-/* SST25 chips are SPI, first byte of device id is memory type, second
- * byte of device id is related to log(bitsize) at least for some chips. */
#define SST_25WF512 0x2501
#define SST_25WF010 0x2502
#define SST_25WF020 0x2503
@@ -196,22 +202,23 @@ extern struct flashchip flashchips[];
#define W_49V002A 0xB0
#define W_49V002FA 0x32
-/* function prototypes from udelay.h */
-
+/* udelay.c */
void myusec_delay(int time);
void myusec_calibrate_delay();
-/* pci handling for board/chipset_enable */
-struct pci_access *pacc; /* For board and chipset_enable */
+/* PCI handling for board/chipset_enable */
+struct pci_access *pacc;
struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device);
struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
uint16_t card_vendor, uint16_t card_device);
-int board_flash_enable(char *vendor, char *part); /* board_enable.c */
-int chipset_flash_enable(void); /* chipset_enable.c */
+/* board_enable.c */
+int board_flash_enable(const char *vendor, const char *part);
-/* physical memory mapping device */
+/* chipset_enable.c */
+int chipset_flash_enable(void);
+/* Physical memory mapping device */
#if defined (__sun) && (defined(__i386) || defined(__amd64))
# define MEM_DEV "/dev/xsvc"
#else
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 19:51:59 +0000