summaryrefslogtreecommitdiff
path: root/util
diff options
context:
space:
mode:
Diffstat (limited to 'util')
-rw-r--r--util/me_cleaner/README.md58
-rwxr-xr-xutil/me_cleaner/me_cleaner.py474
2 files changed, 378 insertions, 154 deletions
diff --git a/util/me_cleaner/README.md b/util/me_cleaner/README.md
index 0ca3d32bf9..72c15986df 100644
--- a/util/me_cleaner/README.md
+++ b/util/me_cleaner/README.md
@@ -1,26 +1,44 @@
-# ME cleaner
+# me_cleaner
-A cleaner for Intel ME/TXE images.
+Intel ME is a coprocessor integrated in all post-2006 Intel boards, for which
+this [Libreboot page](https://libreboot.org/faq.html#intelme) has an excellent
+description. The main component of Intel ME is Intel AMT, and I suggest you to
+read [this Wikipedia page](https://en.wikipedia.org/wiki/Intel_Active_Management_Technology)
+for more information about it. In short, Intel ME is an irremovable environment
+with an obscure signed proprietary firmware, with full network and memory
+access, which poses a serious security threat.
+Even when disabled from the BIOS settings, Intel ME is active: the only way to
+be sure it is disabled is to remove its firmware from the flash chip.
-This tools removes any unnecessary partition from an Intel ME/TXE firmware, reducing
-its size and its ability to interact with the system.
-It should work both with coreboot and with the factory firmware.
+Before Nehalem (ME version 6, 2008/2009) the ME firmware could be removed
+completely from the flash chip by setting a couple of bits inside the flash
+descriptor, without the need to reverse-engineer the ME firmware.
-Currently this tool:
- * Scans the FPT (partition table) and checks that everything is correct
- * Removes any partition entry (except for FTPR) from FPT
- * Removes any partition except for the fundamental one (FTPR)
- * Removes the EFFS presence flag
- * Corrects the FPT checksum
- * Removes any non-essential LZMA or Huffman compressed module from the FTPR partition (pre-Skylake only)
- * Relocates the remaining parts of the FTPR partition to the top of the ME region (pre-Skylake only)
- * Checks the validity of the RSA signature of the FTPR partition
+Starting from Nehalem the Intel ME firmware can't be removed anymore: without a
+valid firmware the PC shuts off forcefully after 30 minutes. This project is an
+attempt to remove as much code as possible from such firmware without falling
+into the 30 minutes recovery mode.
-Don't forget to power cycle your PC after flashing the modified ME/TXE image
-(power off and power on, not just reboot).
+me_cleaner currently works on most architectures, see [me_cleaner status](https://github.com/corna/me_cleaner/wiki/me_cleaner-status) (or [its discussion](https://github.com/corna/me_cleaner/issues/3))
+for more info about them. me_cleaner works also on the TXE and SPS firmware.
-See the [current status](https://github.com/corna/me_cleaner/wiki/me_cleaner-status)
-or [a more detailed description](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F)
-of me_cleaner.
+If you want to understand how me_cleaner works, you can read the ["How does it work?" page](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F).
-Special thanks to Federico Amedeo Izzo for his help during the study of Intel ME.
+If you want to apply me_cleaner on your platform I suggest you to read the
+["How does it work?" page](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F)
+and then follow the guide ["How to apply me_cleaner"](https://github.com/corna/me_cleaner/wiki/How-to-apply-me_cleaner).
+
+For pre-Skylake firmware (ME version < 11) this tool removes almost everything,
+leaving only the two fundamental modules needed for the correct boot, ROMP and
+BUP. The code size is reduced from 1.5 MB (non-AMT firmware) or 5 MB (AMT
+firmware) to ~90 kB of compressed code.
+
+Starting from Skylake (ME version >= 11) the ME subsystem and the firmware
+structure have changed, requiring substantial changes in me_cleaner.
+The fundamental modules required for the correct boot are now four (rbe, kernel,
+syslib and bup) and the minimum code size is ~300 kB of compressed code (from
+the 2 MB of the non-AMT firmware and the 7 MB of the AMT one).
+
+This project is based on the work of the community; in particular I thank Igor
+Skochinsky, for the core information about Intel ME and its firmware structure,
+and Federico Amedeo Izzo, for its help during the study of Intel ME.
diff --git a/util/me_cleaner/me_cleaner.py b/util/me_cleaner/me_cleaner.py
index 8ca5498134..e8a89cc92c 100755
--- a/util/me_cleaner/me_cleaner.py
+++ b/util/me_cleaner/me_cleaner.py
@@ -25,14 +25,15 @@ from struct import pack, unpack
min_ftpr_offset = 0x400
spared_blocks = 4
-unremovable_modules = ("BUP", "ROMP")
+unremovable_modules = ("ROMP", "BUP")
+unremovable_modules_me11 = ("rbe", "kernel", "syslib", "bup")
class OutOfRegionException(Exception):
pass
-class regionFile:
+class RegionFile:
def __init__(self, f, region_start, region_end):
self.f = f
self.region_start = region_start
@@ -81,6 +82,13 @@ class regionFile:
else:
raise OutOfRegionException()
+ def save(self, filename, size):
+ self.f.seek(self.region_start)
+ copyf = open(filename, "w+b")
+ for i in range(0, size, 4096):
+ copyf.write(self.f.read(4096 if size - i >= 4096 else size - i))
+ return copyf
+
def get_chunks_offsets(llut, me_start):
chunk_count = unpack("<I", llut[0x04:0x08])[0]
@@ -109,7 +117,7 @@ def get_chunks_offsets(llut, me_start):
def remove_modules(f, mod_headers, ftpr_offset, me_end):
- comp_str = ("Uncomp.", "Huffman", "LZMA")
+ comp_str = ("uncomp.", "Huffman", "LZMA")
unremovable_huff_chunks = []
chunks_offsets = []
base = 0
@@ -211,6 +219,15 @@ def check_partition_signature(f, offset):
return "{:#x}".format(decrypted_sig).endswith(sha256.hexdigest()) # FIXME
+def print_check_partition_signature(f, offset):
+ if check_partition_signature(f, offset):
+ print("VALID")
+ else:
+ print("INVALID!!")
+ sys.exit("The FTPR partition signature is not valid. Is the input "
+ "ME/TXE image valid?")
+
+
def relocate_partition(f, me_start, me_end, partition_header_offset,
new_offset, mod_headers):
@@ -226,7 +243,7 @@ def relocate_partition(f, me_start, me_end, partition_header_offset,
llut_start = unpack("<I", mod_header[0x38:0x3C])[0] + old_offset
break
- if llut_start != 0:
+ if mod_headers and llut_start != 0:
# Bytes 0x9:0xb of the LLUT (bytes 0x1:0x3 of the AddrBase) are added
# to the SpiBase (bytes 0xc:0x10 of the LLUT) to compute the final
# start of the LLUT. Since AddrBase is not modifiable, we can act only
@@ -239,43 +256,45 @@ def relocate_partition(f, me_start, me_end, partition_header_offset,
new_offset = ((new_offset + 0x1f) // 0x20) * 0x20
offset_diff = new_offset - old_offset
- print("Relocating {} to {:#x} - {:#x}..."
- .format(name, new_offset, new_offset + partition_size))
+ print("Relocating {} from {:#x} - {:#x} to {:#x} - {:#x}..."
+ .format(name, old_offset, old_offset + partition_size,
+ new_offset, new_offset + partition_size))
print(" Adjusting FPT entry...")
f.write_to(partition_header_offset + 0x8,
pack("<I", new_offset - me_start))
- if llut_start != 0:
- f.seek(llut_start)
- if f.read(4) == b"LLUT":
- print(" Adjusting LUT start offset...")
- lut_offset = llut_start + offset_diff + 0x40 - \
- lut_start_corr - me_start
- f.write_to(llut_start + 0x0c, pack("<I", lut_offset))
-
- print(" Adjusting Huffman start offset...")
- f.seek(llut_start + 0x14)
- old_huff_offset = unpack("<I", f.read(4))[0]
- f.write_to(llut_start + 0x14,
- pack("<I", old_huff_offset + offset_diff))
-
- print(" Adjusting chunks offsets...")
- f.seek(llut_start + 0x4)
- chunk_count = unpack("<I", f.read(4))[0]
- f.seek(llut_start + 0x40)
- chunks = bytearray(chunk_count * 4)
- f.readinto(chunks)
- for i in range(0, chunk_count * 4, 4):
- if chunks[i + 3] != 0x80:
- chunks[i:i + 3] = \
- pack("<I", unpack("<I", chunks[i:i + 3] +
- b"\x00")[0] + offset_diff)[0:3]
- f.write_to(llut_start + 0x40, chunks)
+ if mod_headers:
+ if llut_start != 0:
+ f.seek(llut_start)
+ if f.read(4) == b"LLUT":
+ print(" Adjusting LUT start offset...")
+ lut_offset = llut_start + offset_diff + 0x40 - \
+ lut_start_corr - me_start
+ f.write_to(llut_start + 0x0c, pack("<I", lut_offset))
+
+ print(" Adjusting Huffman start offset...")
+ f.seek(llut_start + 0x14)
+ old_huff_offset = unpack("<I", f.read(4))[0]
+ f.write_to(llut_start + 0x14,
+ pack("<I", old_huff_offset + offset_diff))
+
+ print(" Adjusting chunks offsets...")
+ f.seek(llut_start + 0x4)
+ chunk_count = unpack("<I", f.read(4))[0]
+ f.seek(llut_start + 0x40)
+ chunks = bytearray(chunk_count * 4)
+ f.readinto(chunks)
+ for i in range(0, chunk_count * 4, 4):
+ if chunks[i + 3] != 0x80:
+ chunks[i:i + 3] = \
+ pack("<I", unpack("<I", chunks[i:i + 3] +
+ b"\x00")[0] + offset_diff)[0:3]
+ f.write_to(llut_start + 0x40, chunks)
+ else:
+ sys.exit("Huffman modules present but no LLUT found!")
else:
- sys.exit("Huffman modules present but no LLUT found!")
- else:
- print(" No Huffman modules found")
+ print(" No Huffman modules found")
print(" Moving data...")
partition_size = min(partition_size, me_end - old_offset)
@@ -284,66 +303,221 @@ def relocate_partition(f, me_start, me_end, partition_header_offset,
return new_offset
+def check_and_remove_modules(f, me_start, me_end, offset, min_offset,
+ relocate, keep_modules):
+
+ f.seek(offset + 0x20)
+ num_modules = unpack("<I", f.read(4))[0]
+ f.seek(offset + 0x290)
+ data = f.read(0x84)
+
+ module_header_size = 0
+ if data[0x0:0x4] == b"$MME":
+ if data[0x60:0x64] == b"$MME" or num_modules == 1:
+ module_header_size = 0x60
+ elif data[0x80:0x84] == b"$MME":
+ module_header_size = 0x80
+
+ if module_header_size != 0:
+ f.seek(offset + 0x290)
+ mod_headers = [f.read(module_header_size)
+ for i in range(0, num_modules)]
+
+ if all(hdr.startswith(b"$MME") for hdr in mod_headers):
+ if args.keep_modules:
+ end_addr = offset + ftpr_lenght
+ else:
+ end_addr = remove_modules(f, mod_headers,
+ offset, me_end)
+
+ if args.relocate:
+ new_offset = relocate_partition(f, me_start, me_end,
+ me_start + 0x30,
+ min_offset + me_start,
+ mod_headers)
+ end_addr += new_offset - offset
+ offset = new_offset
+
+ return end_addr, offset
+
+ else:
+ print("Found less modules than expected in the FTPR "
+ "partition; skipping modules removal")
+ else:
+ print("Can't find the module header size; skipping "
+ "modules removal")
+
+ return -1, offset
+
+
+def check_and_remove_modules_me11(f, me_start, me_end, partition_offset,
+ partition_lenght, min_offset, relocate,
+ keep_modules):
+
+ comp_str = ("LZMA/uncomp.", "Huffman")
+
+ if keep_modules:
+ end_data = partition_offset + partition_lenght
+ else:
+ end_data = 0
+
+ f.seek(partition_offset + 0x4)
+ module_count = unpack("<I", f.read(4))[0]
+
+ modules = []
+ modules.append(("end", partition_lenght, 0))
+
+ f.seek(partition_offset + 0x10)
+ for i in range(0, module_count):
+ data = f.read(0x18)
+ name = data[0x0:0xc].rstrip(b"\x00").decode("ascii")
+ offset_block = unpack("<I", data[0xc:0x10])[0]
+ offset = offset_block & 0x01ffffff
+ comp_type = (offset_block & 0x02000000) >> 25
+
+ modules.append((name, offset, comp_type))
+
+ modules.sort(key=lambda x: x[1])
+
+ for i in range(0, module_count):
+ name = modules[i][0]
+ offset = partition_offset + modules[i][1]
+ end = partition_offset + modules[i + 1][1]
+ removed = False
+
+ if name.endswith(".man") or name.endswith(".met"):
+ compression = "uncompressed"
+ else:
+ compression = comp_str[modules[i][2]]
+
+ sys.stdout.write(" {:<12} ({:<12}, 0x{:06x} - 0x{:06x}): "
+ .format(name, compression, offset, end))
+
+ if name.endswith(".man"):
+ print("NOT removed, partition manif.")
+ elif name.endswith(".met"):
+ print("NOT removed, module metadata")
+ elif any(name.startswith(m) for m in unremovable_modules_me11):
+ print("NOT removed, essential")
+ else:
+ removed = True
+ f.fill_range(offset, min(end, me_end), b"\xff")
+ print("removed")
+
+ if not removed:
+ end_data = max(end_data, end)
+
+ if relocate:
+ new_offset = relocate_partition(f, me_start, me_end, me_start + 0x30,
+ min_offset + me_start, [])
+ end_data += new_offset - partition_offset
+ partition_offset = new_offset
+
+ return end_data, partition_offset
+
+
+def check_mn2_tag(f, offset):
+ f.seek(offset + 0x1c)
+ tag = f.read(4)
+ if tag != b"$MN2":
+ sys.exit("Wrong FTPR manifest tag ({}), this image may be corrupted"
+ .format(tag))
+
+
+def flreg_to_start_end(flreg):
+ return (flreg & 0x7fff) << 12, (flreg >> 4 & 0x7fff000 | 0xfff) + 1
+
+
+def start_end_to_flreg(start, end):
+ return (start & 0x7fff000) >> 12 | ((end - 1) & 0x7fff000) << 4
+
+
if __name__ == "__main__":
parser = argparse.ArgumentParser(description="Tool to remove as much code "
- "as possible from Intel ME/TXE firmwares")
+ "as possible from Intel ME/TXE firmware "
+ "images")
parser.add_argument("file", help="ME/TXE image or full dump")
parser.add_argument("-O", "--output", help="save the modified image in a "
"separate file, instead of modifying the original "
"file")
parser.add_argument("-r", "--relocate", help="relocate the FTPR partition "
- "to the top of the ME region", action="store_true")
+ "to the top of the ME region to save even more space",
+ action="store_true")
parser.add_argument("-k", "--keep-modules", help="don't remove the FTPR "
"modules, even when possible", action="store_true")
parser.add_argument("-d", "--descriptor", help="remove the ME/TXE "
"Read/Write permissions to the other regions on the "
"flash from the Intel Flash Descriptor (requires a "
"full dump)", action="store_true")
+ parser.add_argument("-t", "--truncate", help="truncate the empty part of "
+ "the firmware (requires a separated ME/TXE image or "
+ "--extract-me)", action="store_true")
parser.add_argument("-c", "--check", help="verify the integrity of the "
"fundamental parts of the firmware and exit",
action="store_true")
+ parser.add_argument("-D", "--extract-descriptor", help="extract the "
+ "flash descriptor from a full dump; when used with "
+ "--truncate save a descriptor with adjusted regions "
+ "start and end")
+ parser.add_argument("-M", "--extract-me", help="extract the ME firmware "
+ "from a full dump; when used with --truncate save a "
+ "truncated ME/TXE image")
+
args = parser.parse_args()
+ if args.check:
+ if args.relocate:
+ sys.exit("-c and -r can't be used together")
+ elif args.truncate:
+ sys.exit("-c and -t can't be used together")
+
f = open(args.file, "rb" if args.check or args.output else "r+b")
f.seek(0x10)
magic = f.read(4)
if magic == b"$FPT":
print("ME/TXE image detected")
- me_start = 0
- f.seek(0, 2)
- me_end = f.tell()
if args.descriptor:
sys.exit("-d requires a full dump")
+ if args.extract_descriptor:
+ sys.exit("-D requires a full dump")
+
+ if args.extract_me:
+ sys.exit("-M requires a full dump")
+
+ me_start = 0
+ f.seek(0, 2)
+ me_end = f.tell()
+
elif magic == b"\x5a\xa5\xf0\x0f":
print("Full image detected")
+
+ if args.truncate and not args.extract_me:
+ sys.exit("-t requires a separated ME/TXE image (or --extract-me)")
+
f.seek(0x14)
flmap0, flmap1 = unpack("<II", f.read(8))
- nr = flmap0 >> 24 & 0x7
frba = flmap0 >> 12 & 0xff0
fmba = (flmap1 & 0xff) << 4
- if nr >= 2:
- f.seek(frba)
- flreg0, flreg1, flreg2 = unpack("<III", f.read(12))
- fd_start = (flreg0 & 0x1fff) << 12
- fd_end = flreg0 >> 4 & 0x1fff000 | 0xfff + 1
- me_start = (flreg2 & 0x1fff) << 12
- me_end = flreg2 >> 4 & 0x1fff000 | 0xfff + 1
-
- if me_start >= me_end:
- sys.exit("The ME/TXE region in this image has been disabled")
-
- f.seek(me_start + 0x10)
- if f.read(4) != b"$FPT":
- sys.exit("The ME/TXE region is corrupted or missing")
-
- print("The ME/TXE region goes from {:#x} to {:#x}"
- .format(me_start, me_end))
- else:
- sys.exit("This image does not contains a ME/TXE firmware NR = {})"
- .format(nr))
+
+ f.seek(frba)
+ flreg = unpack("<III", f.read(12))
+
+ fd_start, fd_end = flreg_to_start_end(flreg[0])
+ bios_start, bios_end = flreg_to_start_end(flreg[1])
+ me_start, me_end = flreg_to_start_end(flreg[2])
+
+ if me_start >= me_end:
+ sys.exit("The ME/TXE region in this image has been disabled")
+
+ f.seek(me_start + 0x10)
+ if f.read(4) != b"$FPT":
+ sys.exit("The ME/TXE region is corrupted or missing")
+
+ print("The ME/TXE region goes from {:#x} to {:#x}"
+ .format(me_start, me_end))
else:
sys.exit("Unknown image")
@@ -378,8 +552,28 @@ if __name__ == "__main__":
if f.read(4) == b"$CPD":
me11 = True
num_entries = unpack("<I", f.read(4))[0]
- ftpr_mn2_offset = 0x10 + num_entries * 0x18
+
+ f.seek(ftpr_offset + 0x10)
+ ftpr_mn2_offset = -1
+
+ for i in range(0, num_entries):
+ data = f.read(0x18)
+ name = data[0x0:0xc].rstrip(b"\x00").decode("ascii")
+ offset = unpack("<I", data[0xc:0xf] + b"\x00")[0]
+
+ if name == "FTPR.man":
+ ftpr_mn2_offset = offset
+ break
+
+ if ftpr_mn2_offset >= 0:
+ check_mn2_tag(f, ftpr_offset + ftpr_mn2_offset)
+ print("Found FTPR manifest at {:#x}"
+ .format(ftpr_offset + ftpr_mn2_offset))
+ else:
+ sys.exit("Can't find the manifest of the FTPR partition")
+
else:
+ check_mn2_tag(f, ftpr_offset)
me11 = False
ftpr_mn2_offset = 0
@@ -394,7 +588,10 @@ if __name__ == "__main__":
shutil.copy(args.file, args.output)
f = open(args.output, "r+b")
- mef = regionFile(f, me_start, me_end)
+ mef = RegionFile(f, me_start, me_end)
+
+ if args.descriptor or args.extract_descriptor:
+ fdf = RegionFile(f, fd_start, fd_end)
print("Removing extra partitions...")
mef.fill_range(me_start + 0x30, ftpr_offset, b"\xff")
@@ -410,18 +607,15 @@ if __name__ == "__main__":
flags &= ~(0x00000001)
mef.write_to(me_start + 0x24, pack("<I", flags))
- if args.descriptor:
- print("Removing ME/TXE R/W access to the other flash regions...")
- fdf = regionFile(f, fd_start, fd_end)
- fdf.write_to(fmba + 0x4, pack("<I", 0x04040000))
-
if me11:
mef.seek(me_start + 0x10)
header = bytearray(mef.read(0x20))
+ header[0x0b] = 0x00
else:
mef.seek(me_start)
header = bytearray(mef.read(0x30))
- checksum = (0x100 - (sum(header) - header[0x1b]) & 0xff) & 0xff
+ header[0x1b] = 0x00
+ checksum = (0x100 - sum(header) & 0xff) & 0xff
print("Correcting checksum (0x{:02x})...".format(checksum))
# The checksum is just the two's complement of the sum of the first
@@ -430,76 +624,88 @@ if __name__ == "__main__":
# must be always 0x00.
mef.write_to(me_start + 0x1b, pack("B", checksum))
- if not me11:
- print("Reading FTPR modules list...")
- mef.seek(ftpr_offset + 0x1c)
- tag = mef.read(4)
-
- if tag == b"$MN2":
- mef.seek(ftpr_offset + 0x20)
- num_modules = unpack("<I", mef.read(4))[0]
- mef.seek(ftpr_offset + 0x290)
- data = mef.read(0x84)
-
- module_header_size = 0
- if data[0x0:0x4] == b"$MME":
- if data[0x60:0x64] == b"$MME" or num_modules == 1:
- module_header_size = 0x60
- elif data[0x80:0x84] == b"$MME":
- module_header_size = 0x80
-
- if module_header_size != 0:
- mef.seek(ftpr_offset + 0x290)
- mod_headers = [mef.read(module_header_size)
- for i in range(0, num_modules)]
-
- if all(hdr.startswith(b"$MME") for hdr in mod_headers):
- if args.keep_modules:
- end_addr = ftpr_offset + ftpr_lenght
- else:
- end_addr = remove_modules(mef, mod_headers,
- ftpr_offset, me_end)
-
- if args.relocate:
- new_ftpr_offset = relocate_partition(mef,
- me_start, me_end,
- me_start + 0x30,
- min_ftpr_offset + me_start,
- mod_headers)
- end_addr += new_ftpr_offset - ftpr_offset
- ftpr_offset = new_ftpr_offset
-
- end_addr = (end_addr // 0x1000 + 1) * 0x1000
- end_addr += spared_blocks * 0x1000
-
- print("The ME minimum size should be {0} bytes "
- "({0:#x} bytes)".format(end_addr - me_start))
-
- if me_start > 0:
- print("The ME region can be reduced up to:\n"
- " {:08x}:{:08x} me"
- .format(me_start, end_addr - 1))
- else:
- print("Found less modules than expected in the FTPR "
- "partition; skipping modules removal")
- else:
- print("Can't find the module header size; skipping "
- "modules removal")
+ print("Reading FTPR modules list...")
+ if me11:
+ end_addr, ftpr_offset = \
+ check_and_remove_modules_me11(mef, me_start, me_end,
+ ftpr_offset, ftpr_lenght,
+ min_ftpr_offset, args.relocate,
+ args.keep_modules)
+ else:
+ end_addr, ftpr_offset = \
+ check_and_remove_modules(mef, me_start, me_end, ftpr_offset,
+ min_ftpr_offset, args.relocate,
+ args.keep_modules)
+
+ if end_addr > 0:
+ end_addr = (end_addr // 0x1000 + 1) * 0x1000
+ end_addr += spared_blocks * 0x1000
+
+ print("The ME minimum size should be {0} bytes "
+ "({0:#x} bytes)".format(end_addr - me_start))
+
+ if me_start > 0:
+ print("The ME region can be reduced up to:\n"
+ " {:08x}:{:08x} me".format(me_start, end_addr - 1))
+ elif args.truncate:
+ print("Truncating file at {:#x}...".format(end_addr))
+ f.truncate(end_addr)
+
+ if args.descriptor:
+ print("Removing ME/TXE R/W access to the other flash regions...")
+ fdf.write_to(fmba + 0x4, pack("<I", 0x04040000))
+
+ if args.extract_descriptor:
+ if args.truncate:
+ print("Extracting the descriptor to \"{}\"..."
+ .format(args.extract_descriptor))
+ fdf_copy = fdf.save(args.extract_descriptor, fd_end - fd_start)
+
+ if bios_start == me_end:
+ print("Modifying the regions of the extracted descriptor...")
+ print(" {:08x}:{:08x} me --> {:08x}:{:08x} me"
+ .format(me_start, me_end - 1, me_start, end_addr - 1))
+ print(" {:08x}:{:08x} bios --> {:08x}:{:08x} bios"
+ .format(bios_start, bios_end - 1, end_addr, bios_end - 1))
+
+ flreg1 = start_end_to_flreg(end_addr, bios_end)
+ flreg2 = start_end_to_flreg(me_start, end_addr)
+
+ fdf_copy.seek(frba + 0x4)
+ fdf_copy.write(pack("<II", flreg1, flreg2))
else:
- print("Wrong FTPR partition tag ({}); skipping modules removal"
- .format(tag))
+ print("\nWARNING:\n The start address of the BIOS region "
+ "isn't equal to the end address of the ME\n region: if "
+ "you want to recover the space from the ME region you "
+ "have to\n manually modify the descriptor.\n")
+
+ fdf_copy.close()
else:
- print("Modules removal in ME v11 or greater is not yet supported")
+ print("Extracting the descriptor to \"{}\"..."
+ .format(args.extract_descriptor))
+ fdf.save(args.extract_descriptor, fd_end - fd_start).close()
+
+ if args.extract_me:
+ if args.truncate:
+ print("Extracting and truncating the ME image to \"{}\"..."
+ .format(args.extract_me))
+ mef_copy = mef.save(args.extract_me, end_addr - me_start)
+ else:
+ print("Extracting the ME image to \"{}\"..."
+ .format(args.extract_me))
+ mef_copy = mef.save(args.extract_me, me_end - me_start)
- sys.stdout.write("Checking FTPR RSA signature... ")
- if check_partition_signature(f, ftpr_offset + ftpr_mn2_offset):
- print("VALID")
- else:
- print("INVALID!!")
- sys.exit("The FTPR partition signature is not valid. Is the input "
- "ME/TXE image valid?")
+ sys.stdout.write("Checking the FTPR RSA signature of the extracted ME "
+ "image... ")
+ print_check_partition_signature(mef_copy, ftpr_offset +
+ ftpr_mn2_offset - me_start)
+ mef_copy.close()
+
+ sys.stdout.write("Checking the FTPR RSA signature... ")
+ print_check_partition_signature(f, ftpr_offset + ftpr_mn2_offset)
f.close()
if not args.check:
print("Done! Good luck!")
+